Toshiba 210C Bedienungsanleitung

OPERA T OR'S MANU AL FOR COPYING FUNCTIONS DIGIT AL COLOUR PLAIN P APER COPIER[...]

2 T rademarks: Fiery is a trademar k registered in the U .S.P atent and T r ademark Office. Fiery Scan, Command WorkStation, WebSpooler are trademarks of Electronics For Imaging, Inc. How to affix the PM labels W ARNING: Changes or modification made to this equipment, not e xpressly approv ed b y T oshiba TEC or par ties authorized by T oshiba TEC [...]

1 2 3 4 5 6 7 8 9 10 11 12 1 T OSHIB A Q U ALITY IS SECOND T O NONE Supplies / Parts Dependability Genuine T oshiba supplies are subjected to the strictest of inspections so that e very supply you receiv e will perform at optimal le v els. High Productivity Genuine T oshiba supplies are created to meet the demands of our competitiv e w orld and pro[...]

1 2 3 4 5 6 7 8 9 10 11 12 2 General ISO 9000 and ISO 14000 T oshiba toner plants are ISO 9001 or ISO 9002 and ISO 14001 cer tified. Theref ore quality of cr aftsmanship and environmental friendly production are guaranteed from the f actory . Service and Support Benefits T oshiba´s Ser vice engineers are cer tified to keep your copier perf orming [...]

1 2 3 4 5 6 7 8 9 10 11 12 3 PREF A CE Thank you f or purchasing the T oshiba Digital Colour Copier e-STUDIO210c/310c. This Operator’ s Manual describes the following: • how to use the digital colour copier • how to inspect and carry out maintenance on the digital copier • how to remedy mechanical and copying problems The Colour Guidebook i[...]

1 2 3 4 5 6 7 8 9 10 11 12 4 PREF A CE (Cont.) Features of the e-STUDIO210c/310c The e-STUDIO210c/310c is a digital colour copier employing a 4-step tandem copy process, which is capable of high-speed full-colour cop ying. The e-STUDIO210c/310c incorporates a displa y with a touch panel and menu keys that graphically represent copier functions. As [...]

1 2 3 4 5 6 7 8 9 10 11 12 5 T oshiba quality is second to none .............................................................................................. ........ 1 Preface ........................................................................................................................ ........................ 3 Features of the e-STUDIO[...]

1 2 3 4 5 6 7 8 9 10 11 12 6 4 . Colour editing and adjustment ................................................................................................ ....... 4-1 1. Monocolour copying .......................................................................................................... ............ 4- 2 2. Hue adjustment .............[...]

1 2 3 4 5 6 7 8 9 10 11 12 7 11.Specifications & Options ........................................................................................................... 11-1 1 . e-STUDIO210c/310c specifications ........................................................................................... 11 -2 2 . Specifications of options ...........[...]

1 2 3 4 5 6 7 8 9 10 11 12 8 PRECA UTIONS 1. Installation 1 The e-STUDIO210c/310c should be installed by a qualified service technician. Note: The packing material should be disposed of properly . 2 T o obtain the best possible results, this copier should be used in conjunction with a dedicated A C power line at the following ratings. 220–240V , [...]

1 2 3 4 5 6 7 8 9 10 11 12 9 1 Handle and use the copier gently and carefully . • Do not place anything on the paper cassettes or the original feeding tr ay . • Never allow the power cable to be trampled on or pinched between hard objects, otherwise an accident or electrical trouble might occur . • Do not allow an y metal items such as paper [...]

1 2 3 4 5 6 7 8 9 10 11 12 10 2. General Precautions (Cont.) PRECA UTIONS (Cont.) Cop ying Prohibition Label W arning for high temperature areas W arning Label Explanator y Label CLASS 1 LASER PRODUCT APP AREIL A LASER DE CLASSE 1 LASER KLASSE 1 PRODUCTO DE LASER DE CLASE 1 > PS < VORSICHT - LASERSTRAHLUNG, WENN DIE ABDECKUNG GEOFFNET ODER DI[...]

1 2 3 4 5 6 7 8 9 10 11 12 11 Fixing the adjusters (stoppers) There are two adjusters (stoppers) located in the front bot- tom par t of the copier . After mo ving/installing the copier , be sure to turn the adjusters clockwise to fix them firmly on the ground. *T o unloc k the adjusters when moving the copier , turn them anticlockwise. If the copie[...]

1 2 3 4 5 6 7 8 9 10 11 12 12 FORGER Y PREVENTION FUNCTION/ ST ORA GE OF COLOUR COPIES This copier has a f orgery prev ention function. Please ensure that your digital full-colour copier is not used for making copies of prohibited items. FORGER Y PREVENTION FUNCTION (1) The copies should be kept in a place which is not exposed to light to pre vent [...]

1 2 3 4 5 6 7 8 9 10 11 12 1-1 1. BEFORE MAKING COPIES 1. Description of the digital colour copier and the optional equipment ...... 1-2 - Main components .......................................................................................... 1 - 2 - Optional equipment .............................................................................[...]

1 2 3 4 5 6 7 8 9 10 11 12 1-2 BEFORE MAKING COPIES 1. DESCRIPTION OF THE DIGIT AL COLOUR COPIER AND THE OPTIONAL EQUIPMENT Main Components Original cover (Optional) Original glass Key copy counter slot P ower switch Bypass guide Feed side cover Paper size indicator Original scales Control panel Cassettes*1 T ransfer belt unit Fuser unit Operator?[...]

1 2 3 4 5 6 7 8 9 10 11 12 1-3 Optional Equipment Key Copy Counter Records (or accumulates) the number of copies made b y each person or group separ ately . Reversing Automatic Document Feeder Automatically feeds a placed stack of originals one by one to have them copied. Automatic Duplexer This reverses the copies in order to make duplex copies. O[...]

1 2 3 4 5 6 7 8 9 10 11 12 1-4 BEFORE MAKING COPIES HELP TIMER lamp The TIMER lamp lights when the timer is being used. HELP key When this key is pressed, the appropriate operation procedures are displayed. PRINTER/NETWORK key If you have a printing and scanning option (printer controller) installed, press this key to switch between the printer/sca[...]

1 2 3 4 5 6 7 8 9 10 11 12 1-5 If you press the PRINTER/NETWORK key when the optional printer controller is installed, the PRINT ke y is displa y ed on the touch panel ( P age 8-2). Press this ke y if y ou want to start pr inting immediately after copying has been finished. (If it is not pressed, printing automatically star ts in 45 seconds.) ACCES[...]

1 2 3 4 5 6 7 8 9 10 11 12 1-6 BEFORE MAKING COPIES The following information is shown on the touch panel: Copier status, oper ational instructions, cautionary messages, reproduction ratios, total cop y quantity , paper type and colour modes. 1. DESCRIPTION OF THE DIGIT AL COLOUR COPIER AND THE OPTIONAL EQUIPMENT (Cont.) T ouch P anel Function sett[...]

1 2 3 4 5 6 7 8 9 10 11 12 1-7 - Set functions confirmation key This ke y allows y ou to confirm the functions that hav e been set. (The display shown on the right is an e xample .) Clearing the Functions Selected The icons displayed on the screen are as follows(some icons may not appear on the screen): If you press an y ke y that is half-tone shad[...]

1 2 3 4 5 6 7 8 9 10 11 12 1-8 BEFORE MAKING COPIES 2. TURNING ON THE PO WER SWITCH 2 About 4 minutes later , the copier will become read y for copying. - This message appears on the message panel: READ Y 1 T urn ON the po wer switch. - This message appears on the message panel of the Basic Screen: W ait W a rming Up While the copier is warming up,[...]

1 2 3 4 5 6 7 8 9 10 11 12 1-9 If the following message remains displayed, Enter access code the access code y ou hav e entered ma y be incorrect. Ke y in the correct code. If the depar tment control function is in use , be sure to press the ACCESS CODE k ey on the control panel after finishing copying. The displa y returns to the access code input[...]

1 2 3 4 5 6 7 8 9 10 11 12 1-1 0 BEFORE MAKING COPIES When the optional ke y cop y counter is a v ailable , you can only mak e copies b y inser ting y our ke y cop y counter . When y ou make copies with y our key cop y counter inserted, the number of copies made is re- corded (or added up) in your counter . Any n umber of ke y copy counters can be [...]

1 2 3 4 5 6 7 8 9 10 11 12 1-1 1 3. ENERGY-SA VING FUNCTIONS Off-mode (Base model) The power switch of the copier automatically shuts off when the copier is not being used for a specified period of time. The def ault setting is “ OFF ” , ho we v er , the per iod of time until the s witch is turned OFF is selectable betw een 3 and 240 minutes on[...]

1 2 3 4 5 6 7 8 9 10 11 12 1-1 2 BEFORE MAKING COPIES[...]

1 2 3 4 5 6 7 8 9 10 11 12 2-1 2. HO W T O MAKE COPIES 1. General copying procedures ...................................................... 2-2 2. Setting copy paper ..................................................................... 2-4 - Acceptable copy paper types and sizes ....................................................... 2 - 4 - Recomm[...]

1 2 3 4 5 6 7 8 9 10 11 12 2-2 HO W T O MAKE COPIES 3 Select the copy modes ( in the illustration on the page on the right) . - Use the colour mode selection key , the touch panel and the digital keys. - An y cop y modes cannot be changed after the ST AR T k ey is pressed (including the case when originals are divided into multiple sets when fed). [...]

1 2 3 4 5 6 7 8 9 10 11 12 2-3 HELP 1 1 2 1 T o make m ultiple sets of copies: - Key in the copy quantity with the digital keys. - T o correct the input cop y quantity , press the c CLEAR ke y . When paper of the same size as the original has run out: The corresponding cassette key on the touch panel flashes. Add paper or select another cassette. T[...]

1 2 3 4 5 6 7 8 9 10 11 12 2-4 HO W T O MAKE COPIES Feeder Cassettes (optional Cassette Module included) Plain paper (80~105g/m 2 ) THICK1 ( 106~163 g/m 2 ) THICK2 ( 164~209 g/m 2 ) 2. SETTING COPY P APER Acceptable Cop y P aper T ypes and Sizes OHP film THICK3 ( 210~256 g/m 2 ) Thin paper (64~79g/m 2 ) 250 sheets( 120 g/m 2 ) 250 sheets( 160 g/m 2[...]

1 2 3 4 5 6 7 8 9 10 11 12 2-5 (200g/m 2 ) A3,A4 THICK 2 Pay attention to the following points: - Avoid using paper that is specially treated or paper that was printed on another machine, and also avoid performing double copying on the same side of paper; this may cause a malfunction. - Do not use paper with creases, wrinkles or prone to curling, s[...]

1 2 3 4 5 6 7 8 9 10 11 12 2-6 HO W T O MAKE COPIES The paper size of the cassettes of the copier can be changed. The cassettes can also be set f or THIN, THICK1 paper or OHP films. * Bypass copying Page 6-5 1 Pull out the cassette toward you. 2 Push the lever of the side guides in the direction of the arro w, and set the side guides at the desired[...]

1 2 3 4 5 6 7 8 9 10 11 12 2-7 For changing the paper size in the cassette, follow steps 1 to 9 on the previous page, then go to step 3 on the next page. 1 Place the THICK1 paper (or THIN paper or OHP films) in the cassette. - Place the paper with its face up. - For OHP films, only the A4 size is acceptable. Be sure to set them in the second cassse[...]

1 2 3 4 5 6 7 8 9 10 11 12 2-8 HO W T O MAKE COPIES 4 The setting is completed. - The paper type that has been set is displayed on the top right of the screen. P age 1-6 - When thick paper is set Clearing the Cassette for THIN/THICK1/OHP Film Press the THICK1 paper (or THIN paper or OHP films) cassette key , then press the THICK1 (or THIN or OHP ) [...]

1 2 3 4 5 6 7 8 9 10 11 12 2-9 3. SETTING ORIGINALS Acceptable Original T ypes and Sizes Maximum Number of Sheets that Can be Set in the Reversing Automaic Document Feeder (optional) Sizes of originals A4, A4-R, A5-R, B5, B5-R, L T , L T -R, ST -R B4, FOLIO, LG, COMP A3, LD Paper weight 64~90g/m 2 50 sheets 35 sheets 25 sheets 91~105g/m 2 40 sheets[...]

1 2 3 4 5 6 7 8 9 10 11 12 2-1 0 HO W T O MAKE COPIES 3. SETTING ORIGINALS (Cont.) Book-type Originals 1 Raising the original cover or the reversing auto- matic document feeder (optional), place the origi- nal in the direction shown in the illustration. - When using the Book-T ype Originals 2-sided Copies ( Page 3-11) or the Dual-Page ( Page 5-6) f[...]

1 2 3 4 5 6 7 8 9 10 11 12 2-1 1 Precautions for Using the Reversing Automatic Document Feeder (optional) Also, the following originals should be handled carefully: (1) Folded or curled originals should be smoothed out before being used. ( 2) Only originals with the same width can be set at a time. (Do not mix or iginals with different widths.) (3 [...]

1 2 3 4 5 6 7 8 9 10 11 12 2-1 2 HO W T O MAKE COPIES In the Continuous Feed Mode P age 6-2 1 After aligning the edges of originals well, place them face up and align the slides to the width of the origi- nals. - One original sheet is also acceptable. - Maximum number of originals that can be set Page 2-9 3. SETTING ORIGINALS (Cont.) - For setting [...]

1 2 3 4 5 6 7 8 9 10 11 12 2-1 3 In the Single-feed Mode P age 6-3 1 Align the slides to the desired original size. 2 Insert the original face up and straight along the slides; it will then be pulled in automaticall y . - When the original starts being pulled in, let go of it. Slide[...]

1 2 3 4 5 6 7 8 9 10 11 12 2-1 4 HO W T O MAKE COPIES 4. A UT O JOB ST AR T (JOB PRESET) While the copier is warming up (when the power switch is just turned on,etc.), you can preset the copy modes. Cop ying operation starts when warming up has been completed. 2 Place the original(s). Page 2-9 Select copy modes as required. 3 Press the ST ART key .[...]

1 2 3 4 5 6 7 8 9 10 11 12 2-1 5 Y ou can preset the ne xt copy modes during a cop y run. Y ou cannot preset the next cop y modes dur ing the scanning of the originals. During Copying 2 Press the JOB PRESET key during a copy run. 1 Place the original(s). P age 2-9 - The following message appears: JOB PRESETTING Select other copy modes as required. [...]

1 2 3 4 5 6 7 8 9 10 11 12 2-1 6 HO W T O MAKE COPIES After the copying has been finished, press the PRINTER/ NETWORK k ey on the control panel. The printing mode will be resumed. 2 Press the COPY JOB REQUEST key during print- ing. - The screen on the right appears during printing. If you press the COPY JOB REQUEST ke y , preset copying be- comes a[...]

1 2 3 4 5 6 7 8 9 10 11 12 2-1 7 5. INTERRUPT COPYING While multicopying is in progress, you can interrupt it and make copies from different originals. Only sheets that have already been set (in the cassette, optional large-capacity feeder or sheet bypass) are available in interrupt copying. *The following functions are not available: - duplex - bo[...]

1 2 3 4 5 6 7 8 9 10 11 12 2-1 8 HO W T O MAKE COPIES 6. CANCELLING/RESUMING A COPY OPERA TION Y ou can suspend or cancel a cop y operation during multicop ying including scanning, or resume the sus- pended copy operation. Suspending a Copy Operation Press the ST OP ke y on the contr ol panel during copying. After Suspending a Copy Operation T o ca[...]

1 2 3 4 5 6 7 8 9 10 11 12 3-1 3. SETTING OF B ASIC COPY MODES 1. P aper selection .......................................................................... 3-2 - Automatic paper selection (APS) ................................................................... 3 - 2 - Manual paper selection .......................................................[...]

1 2 3 4 5 6 7 8 9 10 11 12 3-2 SETTING OF BASIC COPY MODES - If the Automatic Paper Selection mode is not selected, press the ZOOM··· ke y , then press the APS k e y on the ne xt screen. 1 Place paper in the cassette(s). P age 2-4 - If the following messages are shown, proceed the indications as you are told to: Change direction of original Set [...]

1 2 3 4 5 6 7 8 9 10 11 12 3-3 1 Place paper in the cassette(s). P age 2-4 - When using this mode in bypass cop ying ( Page 6-5), be sure to specify the paper size. - Or press the ZOOM··· key to enter the next screen, and press the key of the desired paper size. - OTHER key Page 6-15 Select other copy modes as required. 4 Press the ST ART key . [...]

1 2 3 4 5 6 7 8 9 10 11 12 3-4 SETTING OF BASIC COPY MODES 2 Press the desired cassette, then the ZOOM··· ke y . - The copy paper size is selectable on the screen in step 3 as well. Automatic Magnification Selection (AMS) 1 Place paper in the cassette(s). P age 2-4 3 Press the AMS key . - O THER k e y P age 6-15 4 Place the original(s). Page 2-9[...]

1 2 3 4 5 6 7 8 9 10 11 12 3-5 Select other copy modes as required. 5 Press the ST ART key . 4 Press the ORIGINAL SIZE key of the same size as the original. - Using the original size and copy size, the correct reproduc- tion ratio is computed and displayed on the screen. - OTHER key Page 6-15 Specifying both Original Size and Copy Size 1 Place pape[...]

1 2 3 4 5 6 7 8 9 10 11 12 3-6 SETTING OF BASIC COPY MODES 2 Place the original(s). P age 2-9 3 Press the cassette icon representing the desired copy paper size, then press the ZOOM ···· k ey. - The copy paper size is selectable on the screen in step 4 as well. 4 Press the UP (or DO WN ) key to set the de- sired reproduction ratio. - Each time [...]

1 2 3 4 5 6 7 8 9 10 11 12 3-7 -12- -13- -15- -12- -13- -15- -13- -13- 3 . DUPLEX COPYING (1-SIDED , 2-SIDED , BOOK-TYPE) This function allows y ou to set the type of originals (1-sided, 2-sided or book-type) and the desired type of copying (1-sided or 2-sided). Original Copy * and require the optional reversing automatic document feeder to be inst[...]

1 2 3 4 5 6 7 8 9 10 11 12 3-8 SETTING OF BASIC COPY MODES 2 Place the original(s). P age 2-9 3 Confirm that the 1 1 mode is selected in the ba- sic mode. - If the “ 1-SIDED 1-SIDED ” mode is not selected, press the key (shaded) in the screen on the right, then press the 1 1 key on the next screen. 3. DUPLEX COPYING (1-SIDED, 2-SIDED , BOOK-TYP[...]

1 2 3 4 5 6 7 8 9 10 11 12 3-9 4 Press the 1 2 key . Select other copy modes as required. 5 Press the ST ART key . - When placing an original on the glass, perform steps 5 to 6 on page 2-3 continuously . 1-Sided Originals 2-Sided Copies The optional automatic duplexer must be installed. Duplex copying can be performed in the thin paper (64~79g/m 2 [...]

1 2 3 4 5 6 7 8 9 10 11 12 3-1 0 SETTING OF BASIC COPY MODES 2 Place the originals. P age 2-9 3 On the basic screen, press the key (shaded) on the right. 1 Place paper in the cassette(s). P age 2-4 3. DUPLEX COPYING (1-SIDED, 2-SIDED , BOOK-TYPE) (Cont.) 4 Press the 2 2 key . 5 Press the ST ART key . 2-Sided Originals 2-Sided Copies 2-Sided Origina[...]

1 2 3 4 5 6 7 8 9 10 11 12 3-1 1 4 Press the 2 1 key . Select other cop y modes as required. Book-T ype Originals 2-Sided Copies The optional automatic duplexer must be installed. Duplex copying can be performed in the thin paper (64~79g/m 2 ) and the plain paper (80~105g/m 2 ) modes. *The acceptable paper siz es for this function are A4 or B5 only[...]

1 2 3 4 5 6 7 8 9 10 11 12 3-1 2 SETTING OF BASIC COPY MODES 8 T urn to the ne xt page, set the book a gain and press the ST AR T ke y . - Pressing the YES ke y and then the ST ART k ey also continues copying. - Repeat the procedure above until all your originals have been scanned. 9 After all your originals have been scanned, press the FINISHED ke[...]

1 2 3 4 5 6 7 8 9 10 11 12 3-1 3 2 Place the original(s). P age 2-9 3 Press the A UT O key . 4. COPY DENSITY ADJUSTMENT Automatic Copy Density Mode 1 Place paper in the cassette(s). P age 2-4 4 Press the ST ART key . In the automatic copy density mode, the background level is detected during copying, so the copying speed becomes slow er . Select ot[...]

1 2 3 4 5 6 7 8 9 10 11 12 3-1 4 SETTING OF BASIC COPY MODES HELP 5. COLOUR MODE This function is to switch the colour copy mode and black-and-white copy mode. 1 Press the desired colour mode selection key . - The lamp inside of the selected key lights. - FULL COLOUR : Regardless of colour , all or iginals are colour-copied (default setting). - BLA[...]

1 2 3 4 5 6 7 8 9 10 11 12 3-1 5 4 According to the type of your original, choose the most suitable image type mode by pressing one of the keys: TEXT/PHOTO : Original with text and printed image mixed together (default setting) TEXT : Original with text only (or text and line artwork) PRINTED IMAGE : Original with printed photos using half tone dot[...]

1 2 3 4 5 6 7 8 9 10 11 12 3-1 6 SETTING OF BASIC COPY MODES[...]

1 2 3 4 5 6 7 8 9 10 11 12 4-1 4. COLOUR EDITING AND ADJUSTMENT 1. Monocolour copying .................................................................. 4-2 2. Hue adjustment .......................................................................... 4-3 3. Saturation ..................................................................................[...]

1 2 3 4 5 6 7 8 9 10 11 12 4-2 COLOUR EDITING AND ADJUSTMENT Select other copy modes as required. 2 Place the original(s). P age 2-9 3 Press the COLOUR key to enter the colour menu. Then press the MONOCOLOUR key . 1. MONOCOLOUR COPYING Y ou can select one colour out of the 10 colours of the colour sample seal to make a monocolour cop y . 1 Place pa[...]

1 2 3 4 5 6 7 8 9 10 11 12 4-3 2 Place the original(s). P age 2-9 3 Press the COLOUR key to enter the colour menu. Then press the HUE/SA TURA TION key . 4 Press the HUE key , then the + or - ke y to adjust the hue. - Pressing the + key brings the colour closer to the next clockwise colour while pressing the - key brings it closer to the next anticl[...]

1 2 3 4 5 6 7 8 9 10 11 12 4-4 COLOUR EDITING AND ADJUSTMENT 5 Press the SET key . 2 Place the original(s). P age 2-9 3 Press the COLOUR key to enter the colour menu. Then press the HUE/SA TURA TION key . 3. SA TURA TION This function allows you to adjust the saturation of copies. 1 Place paper in the cassette(s). P age 2-4 4 Press the SA TURA TION[...]

1 2 3 4 5 6 7 8 9 10 11 12 4-5 5 Press the SET key . 2 Place the original(s). P age 2-9 3 Press the COLOUR key to enter the colour menu. Then press the COLOUR B ALANCE key . 4. COLOUR B ALANCE (YMCK ADJUSTMENT) This function allows you to adjust the colour balance of copies by changing the strength of the primary colours (Y ellow(Y), Magenta(M), Cy[...]

1 2 3 4 5 6 7 8 9 10 11 12 4-6 COLOUR EDITING AND ADJUSTMENT 5 Press the SET key . 2 Place the original(s). P age 2-9 3 Press the COLOUR key to enter the colour menu. Then press the RGB ADJUSTMENT key . 5. RGB ADJUSTMENT This function allows you to adjust the colour balance by changing the strength of Red(R), Green(G) and Blue(B). 1 Place paper in [...]

1 2 3 4 5 6 7 8 9 10 11 12 4-7 2 Place the original(s). P age 2-9 3 Press the COLOUR key to enter the colour menu. Then press the ONE TOUCH ADJUSTMENT ke y . 6. ONE-T OUCH ADJUSTMENT Y ou can mak e the image quality war m, cool, vivid or clear with just one touch. 1 Place paper in the cassette(s). P age 2-4 4 Press the W ARM ( COOL , VIVID , or CLE[...]

1 2 3 4 5 6 7 8 9 10 11 12 4-8 COLOUR EDITING AND ADJUSTMENT 2 Place the original(s). P age 2-9 3 Press the COLOUR key to enter the colour menu. Then press the BA CKGROUND ADJUSTMENT ke y . 7. B A CKGR OUND ADJUSTMENT This function allows you to emphasize the background of light colour originals or to avoid copying the background of dark colour ori[...]

1 2 3 4 5 6 7 8 9 10 11 12 4-9 2 Place the original(s). P age 2-9 3 Press the COLOUR key to enter the colour menu. Then press the SHARPNESS key . 8. SHARPNESS ADJUSTMENT This function allows you to emphasize the letters and edges of images. This function is available in the black or monocolour mode as well. 1 Place paper in the cassette(s). P age 2[...]

1 2 3 4 5 6 7 8 9 10 11 12 4-1 0 COLOUR EDITING AND ADJUSTMENT[...]

1 2 3 4 5 6 7 8 9 10 11 12 5-1 5. USING THE EDITING FUNCTIONS 1 . Image shift ................................................................................ 5-2 2 . Edge erase ............................................................................... 5-4 3 . Book centre erase ..................................................................[...]

1 2 3 4 5 6 7 8 9 10 11 12 USING THE EDITING FUNCTIONS 5-2 1. IMA GE SHIFT 1 Place paper in the cassette(s). P age 2-4 - When using this mode in b ypass copying ( P age 6-5), be sure to specify the paper size. 2 Place the original(s). Page 2-9 3 Press the EDIT key to enter the editing menu, and press the IMA GE SHIFT ke y . With this f eature, a ma[...]

1 2 3 4 5 6 7 8 9 10 11 12 5-3 1 Press the EDIT key to enter the editing menu, and press the IMA GE SHIFT ke y . 3 Adjust the width of the margin, then press the SET key . - The default width of the margin is 14 mm. - T o adjust the width, press the 2mm or 30mm ke y to select the desired number , then press the SET k e y . 6 Press the ST ART key . [...]

1 2 3 4 5 6 7 8 9 10 11 12 USING THE EDITING FUNCTIONS 5-4 Select other copy modes as required. 5 Press the ST AR T key . 2 Place the original(s). P age 2-9 3 Press the EDIT key to enter the editing menu, and press the EDGE ERASE key . 4 Adjust the width of the white border , then press the SET key . - The default width of the white border is 5 mm.[...]

1 2 3 4 5 6 7 8 9 10 11 12 5-5 2 Place the original(s). P age 2-9 3 Press the EDIT key to enter the editing menu, and press the BOOK CENTER ERASE key . - If the key for the desired function is not shown, press the Next key to switch the screen. 4 Adjust the width of the book centre erase margin, then press the SET key . - The default width of the b[...]

1 2 3 4 5 6 7 8 9 10 11 12 USING THE EDITING FUNCTIONS 5-6 2 Press the EDIT key to enter the editing menu, and press the DU AL P A GE ke y . 1 Place paper in the cassette(s). P age 2-4 - When using this mode in bypass copying ( P age 6-5), be sure to specify the paper size. Utilizing this feature allo ws the f acing pages of a book or magazine to b[...]

1 2 3 4 5 6 7 8 9 10 11 12 5-7 7 T urn to the ne xt page, set the book a gain and press the ST AR T key . - Pressing the YES ke y and then the ST AR T k e y also continues copying. - Repeat the above procedure until all your originals have been scanned. 8 After all your originals have been scanned, press the FINISHED key . - Press the COPY FINAL P [...]

1 2 3 4 5 6 7 8 9 10 11 12 USING THE EDITING FUNCTIONS 5-8 2 Place the original(s). P age 2-9 3 Press the EDIT key to enter the editing menu, and press the FULL IMA GE key . - The image is automatically reduced b y a fe w percent so that the entire image can be copied on a sheet. Select other copy modes as required. 4 Press the ST AR T key . 5. FUL[...]

1 2 3 4 5 6 7 8 9 10 11 12 5-9 When a copy is turned with the line —·—·— as a pivot, originals are printed on side 2 (back face) as shown. 6. 2 IN 1 / 4 IN 1 This feature allo ws multiple originals to be reduced and copied onto a single sheet of paper . There are two modes: 2 IN 1 copying, where two originals are copied onto a single sheet,[...]

1 2 3 4 5 6 7 8 9 10 11 12 USING THE EDITING FUNCTIONS 5-1 0 4 Select the type of image combination. - Press the 2IN1 (or 4IN1 , 2IN1 DUPLEX or 4IN1 DUPLEX ) ke y . 5 Select the type of the original. - Press the 1 SIDE (or 2 SIDE ) key . Select other copy modes as required. 6 Press the ST AR T key . - When placing an original on the glass, perform [...]

1 2 3 4 5 6 7 8 9 10 11 12 5-1 1 The magazine sort mode allows 1-sided originals to be copied and sor ted so that they can be f olded and bound along a centre line like typical magazines or booklets . A3, A4-R, B4, LD and L T -R are av ailable. • The optical automatic duplexer must be installed. * This mode cannot be used in combination with the [...]

1 2 3 4 5 6 7 8 9 10 11 12 USING THE EDITING FUNCTIONS 5-1 2 Select other copy modes as required. 6 Press the ST ART ke y . - When placing an original on the glass, perform steps 5 to 6 on page 2-3 continuously . - If the optional finisher (MJ-1020) equipped with the saddle stitcher is installed, copies can be automatically stapled along their cent[...]

1 2 3 4 5 6 7 8 9 10 11 12 5-1 3 Select other copy modes as required. 6 Press the ST AR T key . 2 Place the original(s). P age 2-9 3 Press the EDIT key to enter the editing menu, and press the XY ZOOM key . - If the key for the desired function is not shown, press the Next key to switch between the screens. 1 Place paper in the cassette(s). P age 2[...]

1 2 3 4 5 6 7 8 9 10 11 12 USING THE EDITING FUNCTIONS 5-1 4 3 Press the TRIM (or MASK ) key . 2 Press the EDIT key to enter the editing menu, and press the EDITING key . - If the key for the desired function is not shown, press the Next key to switch the screen. 9. IMA GE EDITING T rimming/Masking Y ou can select an area on an original and copy it[...]

1 2 3 4 5 6 7 8 9 10 11 12 5-1 5 Select other cop y modes as required. 9 Press the ST AR T key . 6 Enter the distance values read in step 5 for the specified area. - Ke y in the value f or X1 with the digital k eys and press the upper SET ke y . - Similar ly , set the values for X2, Y1 and Y2. 7 Press the lower SET key . 8 Place the original(s) on [...]

1 2 3 4 5 6 7 8 9 10 11 12 USING THE EDITING FUNCTIONS 5-1 6 9. IMA GE EDITING (Cont.) 2 Place the original(s). P age 2-9 3 Press the EDIT key to enter the editing menu, and press the EDITING key . - If the key for the desired function is not shown, press the Next key to switch the screen. 1 Place paper in the cassette(s). P age 2-4 - When using th[...]

1 2 3 4 5 6 7 8 9 10 11 12 5-1 7 Select other copy modes as required. 5 Press the ST ART ke y . 2 Place the original(s). P age 2-9 3 Press the EDIT key to enter the editing menu, and press the EDITING key . - If the key for the desired function is not shown, press the Next key to switch the screen. Negative/P ositive Rever sal 1 Place paper in the [...]

1 2 3 4 5 6 7 8 9 10 11 12 USING THE EDITING FUNCTIONS 5-1 8 2 Press the EDIT key to enter the editing menu, and press the CENTERING key . - If the key for the desired function is not shown, press the Next key to switch the screen. 3 Press the ALL (or P ART ) key to select the area for centring. - If you have pressed the ALL k e y , go to step 8. 1[...]

1 2 3 4 5 6 7 8 9 10 11 12 5-1 9 Select other copy modes as required. 8 Place the original(s) on the glass face down and with its bottom toward you and with its top left aligned against the original scale on the left side. P age 2-9 7 Press the lower SET key . 6 Enter the distance values read in step 5 for the specified area. - K ey in the v alue f[...]

1 2 3 4 5 6 7 8 9 10 11 12 USING THE EDITING FUNCTIONS 5-2 0 2 Press the EDIT key to enter the editing menu, and press the IMA GE REPEA T key . - If the key for the desired function is not shown, press the Next key to switch the screen. 11. IMA GE REPEA T Y ou can repeat the entire original or a par t of the area of the or iginal on the copy . * Im[...]

1 2 3 4 5 6 7 8 9 10 11 12 5-2 1 Select other copy modes as required. 9 Press the ST AR T key . 7 Select the repeat number . - T o change the repeat number: Press the 2 or 8 key to select the desired repeat number , and press the SET key . - If the repeat number is not set, the copier automatically re- peats the original once. Only the height direc[...]

1 2 3 4 5 6 7 8 9 10 11 12 USING THE EDITING FUNCTIONS 5-2 2[...]

1 2 3 4 5 6 7 8 9 10 11 12 6-1 6. USING THE SPECIAL FUNCTIONS 1 . Continuous original feeding / Single original feeding ............... 6-2 2. Mixed-sized originals ................................................................ 6-4 3 . Bypass copying ........................................................................ 6-5 - Bypass copying on [...]

1 2 3 4 5 6 7 8 9 10 11 12 6-2 USING THE SPECIAL FUNCTIONS 2 Place the original(s). P age 2-9 - Maximum number of or iginals that can be set P age 2-9 3 Press the PROGRAM key to enter the programme menu, and press the ADF key . 1. CONTINUOUS ORIGINAL FEEDING / SINGLE ORIGINAL FEEDING When using the optional rev ersing automatic document f eeder , y[...]

1 2 3 4 5 6 7 8 9 10 11 12 6-3 2 Press the PROGRAM key to enter the programme me nu , and press the ADF key . Single-feed Mode 1 Place paper in the cassette(s). P age 2-4 3 Press the SADF key . Select other copy modes as required. 4 Place an original. Page 2-9 - The original is automatically pulled in and the screen changes as shown on the right. -[...]

1 2 3 4 5 6 7 8 9 10 11 12 6-4 USING THE SPECIAL FUNCTIONS Select other copy modes as required. 6 Press the ST ART ke y . 2 Place the original(s). P age 2-9 - A3 and A4, B4 and B5, FOLIO and A4-R, LD and L T , or LG and L T -R sized originals can be mixed. - The number of originals you can load at a time is 25. 3 Press the PROGRAM key to enter the [...]

1 2 3 4 5 6 7 8 9 10 11 12 6-5 When the desired size of paper is not set in any of the cassettes, or when you want to make copies on A3- wide or non-standard sized paper , use the sheet b ypass. The modes below are available even in bypass copying if the paper size is specified: - automatic paper selection - automatic magnification selection - dupl[...]

1 2 3 4 5 6 7 8 9 10 11 12 6-6 USING THE SPECIAL FUNCTIONS 3. BYP ASS COPYING (Cont.) 1 Set sheets of paper on the bypass guide and align the slides with the size of the paper . - This message appears: Ready for bypass copying - The paper should be placed with the side to be copied f acing up . - If the paper is long-sized, pull out the triple pape[...]

1 2 3 4 5 6 7 8 9 10 11 12 6-7 Bypass Copying on Standard Size or A3-wide Paper - When paper is set on the sheet bypass, pressing the by- pass guide icon as shown on the right-hand display can also make the screen in step 3 appear . 1 Perform steps 1 to 2 on page 6-6. Set the “O THER” siz e ke y as necessary . P age 6-15 If the paper that has b[...]

1 2 3 4 5 6 7 8 9 10 11 12 6-8 USING THE SPECIAL FUNCTIONS 3. BYP ASS COPYING (Cont.) 2 Press the NON-ST AND ARD key . 1 P erf orm steps 1 to 3 on page 6-7. The size of non-standard paper is within the following ranges: Length: 100 ~ 305mm Width: 148 ~ 457mm P age 6-5 (table) Bypass Copying on Non-standard Size Paper 3 Key in each dimension (length[...]

1 2 3 4 5 6 7 8 9 10 11 12 6-9 1 Press the desired Memory Number key . - When the paper size is ‘0mm’, the selected Memory Number key is vacant. - When the paper siz e is displa y ed, a non-standard siz e is al- ready stored in the selected Memory Number key . If those data may be deleted, perform step 2. New data will be rewrit- ten and stored[...]

1 2 3 4 5 6 7 8 9 10 11 12 6-1 0 USING THE SPECIAL FUNCTIONS 3. BYP ASS COPYING (Cont.) Special P aper such as Thin Paper/Thic k P aper/OHP Films/Stic ker Labels 4 Press the ST ART ke y . Thin Paper/Thick Paper/Sticker Labels 1 P erf orm steps 1 to 2 on pa ge 6-7. 2 Check the thickness of the paper and press the THIN , THICK1 , THICK2 or THICK3 ke [...]

1 2 3 4 5 6 7 8 9 10 11 12 6-1 1 * Set the OHP films on the sheet bypass ver tically (the same as f or A4 placement). If you set them horizontally (the same as for A4-R placement), the following message will appear: Set transparency film in A4 direction * If you select the OHP film mode , the cop y speed becomes slow er . OHP Films 4 Press the ST A[...]

1 2 3 4 5 6 7 8 9 10 11 12 6-1 2 USING THE SPECIAL FUNCTIONS 4. MODE MEMOR Y Storing a Combination of Copy Modes 1 Select the desired copy modes. Example 1: Reproduction ratio ........................................................ 8 5% Copy quantity .......................................................... 10 copies Colour mode .................[...]

1 2 3 4 5 6 7 8 9 10 11 12 6-1 3 3 Press the PROGRAM key to enter the programme menu, and press the MODE MEMOR Y ke y . Recalling a Stored Combination of Copy Modes to Make Copies 1 Place paper in the cassette(s). P age 2-4 4 Press the RECALL key . 4 Press the desired Memory Number key . - The copy modes are stored in the selected Memory Number key[...]

1 2 3 4 5 6 7 8 9 10 11 12 6-1 4 USING THE SPECIAL FUNCTIONS Confirming Stored Copy Modes T o confir m the cop y modes stored in the Memor y Number ke y , perform steps 3 to 5 on the previous page, then press the Set functions confirmation key . - The screen on the right is an example of modes that ha ve been stored in “MEMOR Y 2”. 4. MODE MEMO[...]

1 2 3 4 5 6 7 8 9 10 11 12 6-1 5 When original or paper size is required to be specified and you need to specify it to ‘O THER’ size (except f or non-standard size), this function should be used. - This function allows the O THER key on the screen on the right to recognize the size that will be used. The initial setting f or this ke y is FOLIO [...]

1 2 3 4 5 6 7 8 9 10 11 12 6-1 6 USING THE SPECIAL FUNCTIONS 6. USER SELECTION (INITIAL SETTINGS) Y ou can change the initial setting (def ault setting) of each mode displa y ed on the User Selection screen. The following modes can be changed. • Energy saving level • Colour mode • Copy density (Exposure) mode • Original image type • Bypas[...]

1 2 3 4 5 6 7 8 9 10 11 12 6-1 7 - T o change the initial settings of the automatic calibration, you need to key in the administrator password (5 digits). - Ask your service technician about setting and changing the administrator password. - We recommend you to take a memo in order not to forget the administrator password.[...]

1 2 3 4 5 6 7 8 9 10 11 12 6-1 8 USING THE SPECIAL FUNCTIONS Using the built-in w eekly timer , you can ha ve the copier automatically turned ON and OFF at specified times. For instance , y ou can set the timer f or the starting time and closing time of your office so that the copier will automatically turn itself ON and OFF at those specified time[...]

1 2 3 4 5 6 7 8 9 10 11 12 6-1 9 1 Press the PROGRAM key to enter the programme menu. Press the WEEKL Y TIMER key to remo ve the shading pattern. Y ou can cancel the operation of the w eekly timer so that the copier can be turned ON and OFF nor mally by the power switch. Cancelling the Use of the W eekl y Timer The ON/OFF times of the weekly timer [...]

1 2 3 4 5 6 7 8 9 10 11 12 6-2 0 USING THE SPECIAL FUNCTIONS 2 Key in the year (last two digits only), month, date, day of the week, time (24-hour format) and minutes with the digital keys, in this order from the left-hand column. - Press the key to move to the next entry column. [Ex.] T o enter 2002 / Nov ember ...., 0 2 1 1 .... * Numbers corresp[...]

1 2 3 4 5 6 7 8 9 10 11 12 6-2 1 1 Press the PROGRAM key to enter the programme menu, and press the T O T AL COUNTER ke y . - If the key for the desired function is not shown, press the Pre ke y or the Ne xt k ey to s witch the displa y . This function displays the total number of copies. The total counter is a cumulativ e counter . Y ou cannot cle[...]

1 2 3 4 5 6 7 8 9 10 11 12 6-2 2 USING THE SPECIAL FUNCTIONS 10. DEP AR TMENT MANA GEMENT Y ou can administer the cop y quantity of each depar tment depending on y our purposes by setting an access code. Y ou can also control the number of prints (when the optional pr inter controller is installed) output for each department. Up to 120 codes can be[...]

1 2 3 4 5 6 7 8 9 10 11 12 6-2 3 1 Press the PRINT OUT A CCESS CODES key in the department management menu. - Procedure to display the screen on the right P age 6-22 - Printing begins. Printing an Access Code List Y ou can print out the number of copies or prints (when the optional printer is installed) output for each department. l An output examp[...]

1 2 3 4 5 6 7 8 9 10 11 12 6-2 4 USING THE SPECIAL FUNCTIONS 2 Press the ENABLE key , then the SET ke y . - The default setting is ‘ disab le ’ . If y ou administer the depar t- ments with the access code, press the ENABLE k e y . - Selecting ‘ enable ’ has the copier go into the department man- agement mode. The access code input screen ( [...]

1 2 3 4 5 6 7 8 9 10 11 12 6-2 5 4 Using the digital keys, enter the current access code (5 digits) of the department you want to change, and press the SET key . 4 Using the digital keys, enter the desired access code (5 digits) into the fields of NEW A CCESS CODE and CONFIRM A CCESS CODE, and press the SET key . - Y ou cannot enter an access code [...]

1 2 3 4 5 6 7 8 9 10 11 12 6-2 6 USING THE SPECIAL FUNCTIONS 7 Key in a new upper limit number of copies (7 digits) you want to set with the digital keys, and then press the SET key . - Press the DISABLE k ey if the limitation is not necessary , then press the SET ke y . Deleting an Access Code 4 T o delete all the registered access codes, press th[...]

1 2 3 4 5 6 7 8 9 10 11 12 6-2 7 Resetting Counters This function resets all counters or a specific counter to “ 00000 ” . Howe ver , the total counter ( P age 6-21) cannot be reset. * This setting is a vailable only when the administr ator password has been entered in step 2 on page 6- 22. 1 Press the CLEAR COUNTER key in the department manage[...]

1 2 3 4 5 6 7 8 9 10 11 12 6-2 8 USING THE SPECIAL FUNCTIONS 11. A UT OMA TIC CALIBRA TION 2 Press the PROGRAM key to enter the programme menu, and press the CALIBRA TION ke y . - If the key for the desired function is not shown, press the Pre key or the Next key to switch the screen. 3 Enter the administrator password (5 digits), then press the SE[...]

1 2 3 4 5 6 7 8 9 10 11 12 6-2 9 If the chart is not properly placed, the following message appears: Set chart correctly Go back to step 6 and place the chart again. 7 Press the ST AR T key . - When the message “ READ Y ” appears, the entire operation is completed. 6 When the display on the right appears, place the chart face down on the glass [...]

1 2 3 4 5 6 7 8 9 10 11 12 6-3 0 USING THE SPECIAL FUNCTIONS 1 Press the PROGRAM key to enter the programme menu, and press the CHANGE LANGU A GES key . - If the key for the desired function is not shown, press the Next k e y to s witch the screen. 12. SWITCHING BETWEEN LANGU A GES The language used on the touch panel can be changed to a different [...]

1 2 3 4 5 6 7 8 9 10 11 12 6-3 1 Press the ENERGY SA VER or ST AR T k ey on the control panel. The copier star ts to warm itself up. 13. SETTING THE ENERGY SA VING MODE This function allows the copier automatically to go into the energy saving mode (unnecessary electricity is cut off at standby) if it is left inactive for a specified period of time[...]

1 2 3 4 5 6 7 8 9 10 11 12 6-3 2 USING THE SPECIAL FUNCTIONS Clearing the Off-Mode/Sleep Mode T ur n ON the power switch once again when the copier is in the off-mode. Press the ST ART k ey during the sleep mode . The copier starts to war m itself up . 1 Press the PROGRAM key to enter the programme menu, and press the A UT O SHUT OFF key . - If the[...]

1 2 3 4 5 6 7 8 9 10 11 12 7-1 7. SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS) 1. Finishing modes and finishers (optional) ................................... 7-2 2. Sor t/group cop ying .................................................................... 7-3 3. Staple sor ting ...........................................................[...]

1 2 3 4 5 6 7 8 9 10 11 12 7-2 SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS) 1. FINISHING MODES AND FINISHERS (OPTIONAL) There are 2 types of optional finishers (MJ-1019 and MJ-1020). Functions available differ depending on whether the finisher is in- stalled, or which type of the finisher is installed. - Press the key on the basic scree[...]

1 2 3 4 5 6 7 8 9 10 11 12 7-3 2. SOR T/GR OUP COPYING T o make multiple copies , you can select the sor t mode or g roup mode as necessar y . The paper sizes a v ailab le f or sort/group copying are A3, A4, A4-R, B4, B5, FOLIO , LD , LG, L T , L T -R and COMP . Example of making 5 sets of copies from 5-page originals - Sort copying - Group copying[...]

1 2 3 4 5 6 7 8 9 10 11 12 7-4 SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS) 2 Place the original(s). P age 2-9 AB AB AB AB AB AB AB AB AB AB 3. ST APLE SORTING 1 Place paper in the cassette(s). Page 2-4 - When using this mode in bypass cop ying ( P age 6-5), be sure to specify the paper size. When the optional finisher is installed, you[...]

1 2 3 4 5 6 7 8 9 10 11 12 7-5 P aper size P aper weight 80 g/m² 90 g/m² 105 g/m² A4, B5, L T 50 sheets 30 sheets 30 sheets A3, A4-R, B4, FOLIO 30 sheets 15 sheets 15 sheets LD , LG, L T -R, COMP 4 Press the FRONT ST APLE (or DOUBLE ST APLE or REAR ST APLE ) key . Select other copy modes as required. 5 Press the ST ART ke y . - If you set the st[...]

1 2 3 4 5 6 7 8 9 10 11 12 7-6 SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS) 2 Set the paper size. F or cassette feeding P age 3-3 (step 3) F or bypass f eeding Page 6-7 (step 4) 3 Place the original(s). P age 2-9 - When placing them in the reversing automatic document feeder (optional), set them by referring to the order of pages in the[...]

1 2 3 4 5 6 7 8 9 10 11 12 7-7 If you want to saddle stitch A3, B4 or LD size paper (when the MAGAZINE SORT & SADDLE STITCH or SADDLE STITCH is selected), raise the stopper of the saddle stitch tra y . 4 Press the key on the basic screen as shown on the right (shaded). Conditions Making Saddle Stitching P ossib le Paper size A3 A4-R B4 LD LT - [...]

1 2 3 4 5 6 7 8 9 10 11 12 7-8 SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS) 2 Place the original(s). P age 2-9 3 Press the key on the basic screen as shown on the right (shaded). Number of punch holes and available paper sizes: Since the number of punch holes and the distance between the holes vary depending on the countr y , purchase a[...]

1 2 3 4 5 6 7 8 9 10 11 12 8-1 8. NETW ORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTR OLLER) 1. Scanning the image data ........................................................... 8-2 - Scan setting on the touch panel ................................................................... 8 - 2 - T ouch panel during scanning ..................[...]

1 2 3 4 5 6 7 8 9 10 11 12 8-2 NETWORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER) 1. SCANNING THE IMA GE D A T A Scan Setting on the T ouch P anel Scan setting - When the automatic function clear ( P age 1-4) wor ks in the middle of setting, start setting again from step 2. - Scanning cannot function during data outputting. If the sc[...]

1 2 3 4 5 6 7 8 9 10 11 12 8-3 5 Set the scanning conditions. - Press the PREV and the NEXT keys to switch the screen and make necessary settings. After having completed all the settings, press the OK ke y . - The screen on the right is for selecting a single side or double sides of the originals to be scanned. - The original type and resolution (d[...]

1 2 3 4 5 6 7 8 9 10 11 12 8-4 NETWORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER) 1. SCANNING THE IMA GE D A T A (Cont.) Scan Setting on the T ouch P anel (Cont.) 6 Press the area as shown on the screen on the right to switch to the file name input screen. 7 Enter a file name within 8 letters using the alpha- bet (touch panel) and nu[...]

1 2 3 4 5 6 7 8 9 10 11 12 8-5 10 Press the MAILBO X key . Selecting MAILBO X Stores the scanned data as a file in an arbitrary folder (mailbox) in the hard disc of the optional printer controller . * See the Printing Guide (User Document CD-ROM) for how to retrieve the data. 11 Press the area as shown on the screen on the right, then enter the mai[...]

1 2 3 4 5 6 7 8 9 10 11 12 8-6 NETWORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER) 1. SCANNING THE IMA GE D A T A (Cont.) Scan Setting on the T ouch P anel (Cont.) Selecting E-MAIL Select this when transmitting the scanned data (or URL) by e-mail. 10 Press the E-MAIL key . 11 Press the area as shown on the right to switch to the e-mai[...]

1 2 3 4 5 6 7 8 9 10 11 12 8-7 15 Select an attachment f ormat ( A TT A CHMENT or URL ), then press the SET key . - A TT A CHMENT ... Attaches the scanned image data to the e-mail and sends them to the set mail address from the printer controller. Howe v er , if the mail sev er capacity fo r ‘ A TT ACHMENT ’ (the initial setting is 1MB when set[...]

1 2 3 4 5 6 7 8 9 10 11 12 8-8 NETWORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER) 1. SCANNING THE IMA GE D A T A (Cont.) Scan Setting on the T ouch P anel (Cont.) 10 Press the HOLDQUEUE key . - If you want to store in the ‘ Mailbox ’ or ‘ E-mail ’ as well, make the settings for each destination before pressing the Scan! key .[...]

1 2 3 4 5 6 7 8 9 10 11 12 8-9 T ouch P anel during Scanning When Using the Optional Reversing Automatic Document Feeder When Placing an Original on the Glass 1 The screen is switched as shown on the right dur- ing scanning, and the number of pages that have already been scanned is displayed. - The screen automatically returns to the cop y (basic) [...]

1 2 3 4 5 6 7 8 9 10 11 12 8-1 0 NETWORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER) HELP 2. SHUTTING DO WN THE POWER SUPPL Y T O THE PRINTER CONTROLLER If the optional internal printer controller (GA-1120) is installed, be sure to shut down the power supply to the printer controller before turning the power s witch of the copier OFF [...]

1 2 3 4 5 6 7 8 9 10 11 12 9-1 1 . Description of the flashing graphic symbols ............................. 9-2 2 . Add paper symbol .................................................................... 9-3 - Adding paper to the cassettes .................................................................... 9 - 3 - Adding paper to the large-capacity[...]

1 2 3 4 5 6 7 8 9 10 11 12 9-2 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL 1. DESCRIPTION OF THE FLASHING GRAPHIC SYMBOLS The graphic display on the touch panel shows the status of the copier . When one of the gr aphic sym- bols flashes, take the appropriate action referring to the page shown. CHECK ORIGINALS symbol Flashes when an original[...]

1 2 3 4 5 6 7 8 9 10 11 12 9-3 2. ADD P APER SYMBOL Adding Paper to the Cassettes When the paper supply in the selected cassette or the large-capacity feeder (optional) runs out, the cassette or large-capacity feeder sho wn on the display flashes, and the f ollo wing message appears: Add paper Add paper as follo ws. 1 While pulling up the cassette [...]

1 2 3 4 5 6 7 8 9 10 11 12 9-4 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL 2. ADD P APER SYMBOL (Cont.) Adding Paper to the Large-Capacity Feeder (optional) 1 Open the cover of the large-capacity feeder (optional). 2 Place paper in the large-capacity feeder . - Maximum number of sheets that can be set Page 2-4 - F an the sheets well and mak[...]

1 2 3 4 5 6 7 8 9 10 11 12 9-5 When the toner car tridge runs out of toner, the REPLA CE T ONER CARTRIDGE symbol and a letter showing the cor- responding toner colour flash, and the following message appears: Install new ****** toner cartridge Press HELP 1 Open the front covers in the order of to . Here at T oshiba dependab le high quality image ou[...]

1 2 3 4 5 6 7 8 9 10 11 12 9-6 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL 6 Close the covers in the order of to . - The following message appears: W ait adding toner The copier automatically star ts supplying toner . - When the toner has finished being supplied, the touch panel returns to the Basic menu. (It takes approx. 4 or 5 minutes un[...]

1 2 3 4 5 6 7 8 9 10 11 12 9-7 4. REPLA CE T ONER B A G SYMBOL When the toner bag becomes full of used toner , the REPLACE TONER BAG symbol flashes, and this message appears: Dispose of used toner Press HELP 1 Open the front covers in the order of to . 2 Remove the used toner bag from the copier in the direction of the arro w . 3 Close the used ton[...]

1 2 3 4 5 6 7 8 9 10 11 12 9-8 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL 4 Set the new toner bag in the copier . 5 Close the covers in the order of to . 4. REPLA CE T ONER B A G SYMBOL (Cont.)[...]

1 2 3 4 5 6 7 8 9 10 11 12 9-9 5. CLEAR P APER SYMBOL When a paper misf eed occurs in the copier , the CLEAR P APER symbol flashes in the positions where the paper is misfed. If or symbol of - flashes, the following message will appear: Paper Misfeed in the Reversing Automatic Document Feeder (optional) 2 Raise the automatic document feeder and rem[...]

1 2 3 4 5 6 7 8 9 10 11 12 9-1 0 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL 5. CLEAR P APER SYMBOL (Cont.) Paper Misfeed in the Cassette Feeding Area 1 Open the cover . - Holding the handle, open the cov er slo wly . 4 Raise the automatic document feeder and remove any misfed paper . 3 Open the exit-side cover and remove any misfed origi- [...]

1 2 3 4 5 6 7 8 9 10 11 12 9-1 1 Paper Misfeed in the Large-Capacity Feeder (optional) 1 Open the large-capacity feeder . - Holding its handle as shown, lift it to unlock it and open the feeder slo wly a wa y from the copier. 2 Remo ve an y misf ed paper . 3 Close the large-capacity feeder slo wl y and fully . 5 Remove an y misfed paper . 4 Open th[...]

1 2 3 4 5 6 7 8 9 10 11 12 9-1 2 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL 5. CLEAR P APER SYMBOL (Cont.) Paper Misfeed on the Bypass Guide 1 Pull out any misfed paper on the bypass guide. - Reset the sheets of paper on the bypass guide. 1 Remove the cop y receiving tray . 2 Open the front covers in the order of to . - If a finisher (opti[...]

1 2 3 4 5 6 7 8 9 10 11 12 9-1 3 5 Open the bypass guide. - Open the b ypass guide cover , press the blue b utton and open the bypass guide. - Remov e any misfed paper . 6 T urn the knob near the entrance of the transf er belt unit in the direction of the arrow (anticlockwise) to send any paper to the transfer belt. 3 Open the exit co ver . 4 Remo [...]

1 2 3 4 5 6 7 8 9 10 11 12 9-1 4 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL 5. CLEAR P APER SYMBOL (Cont.) 7 T urn the knob in the direction of the arrow (c lock- wise) and pull out the transfer belt unit. If the CLEAR P APER symbol flashes as sho wn on the right, be sure to carry out step 6. If this action is not sufficient, the paper may[...]

1 2 3 4 5 6 7 8 9 10 11 12 9-1 5 Paper Misfeed in the Automatic Duplexer (optional) 1 Remove the copy receiving tra y . 2 Open the exit co ver . - If a finisher (optional) is attached, first pull it away slowly from the copier by pushing the release le ver . 3 Put down the lower guide of the exit side and re- move an y misfed paper . Lower guide of[...]

1 2 3 4 5 6 7 8 9 10 11 12 9-1 6 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL 5. CLEAR P APER SYMBOL (Cont.) 4 Pull out the automatic duplexer slowly until it comes to a stop. 6 Push the lever to lift the lower guide plate. - Make sure that the guide plate is latched to prevent it from dropping. 5 Holding the handle of the upper guide plate,[...]

1 2 3 4 5 6 7 8 9 10 11 12 9-1 7 Paper Misfeed in the Hole Punch Unit (optional) 1 Push the release lever and pull out the finisher slowly awa y fr om the copier . 2 Open the cover of the hole punch unit. 3 Rotate the blue knob to locate the arrow within the area on the label. - Under this condition, the punchers are up, allowing the paper shown in[...]

1 2 3 4 5 6 7 8 9 10 11 12 9-1 8 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL 5. CLEAR P APER SYMBOL (Cont.) Paper Misfeed in the Finisher (optional) 1 Open the upper finisher cover . 2 Lift knob or knobs and , then remove any misfed paper . 3 Remove any misfed paper in the paper exit area.[...]

1 2 3 4 5 6 7 8 9 10 11 12 9-1 9 3 Open the lower co ver of the finisher . 4 T urn the right-hand knob anticloc kwise. Then push the left-hand knob and turn it clockwise. 2 Open the entrance cover of the saddle stitcher and remove an y misfed paper . Paper Misfeed in the Saddle Stitch Unit (optional) 1 Push the release lever and move the finisher a[...]

1 2 3 4 5 6 7 8 9 10 11 12 9-2 0 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL 5 Remove any paper misfed on the exit side of the saddle stitcher . 6 Open the exit cover of the saddle stitcher and remove any misf ed paper . 5. CLEAR P APER SYMBOL (Cont.)[...]

1 2 3 4 5 6 7 8 9 10 11 12 9-2 1 6. ADDING ST APLES (OPTIONAL) When the staple cartridge runs out of staples, the following message appears: Set staple cartridge Add staples to the cartr idge according to the procedure below . Finisher 1 Open the front co ver of the finisher . 2 Close the front co ver of the finisher , and about 10 seconds later , [...]

1 2 3 4 5 6 7 8 9 10 11 12 9-2 2 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL 6. ADDING ST APLES (OPTIONAL) (Cont.) 7 Push in a new staple case into the staple cartridge completely inside until a click is heard. - Do not remove the seal holding the staples before the staple case is set in the car tridge. 8 Pull out the seal which holds the s[...]

1 2 3 4 5 6 7 8 9 10 11 12 9-2 3 If test stapling fails to be performed and the following mes- sage remains displayed, repeat the above procedure from steps 1 to 12. Set staple car t ridge 11 Confirm that the finisher is attached to the copier , and that the paper size is set to any size other than A5-R or B5-R. - T est stapling cannot be performed[...]

1 2 3 4 5 6 7 8 9 10 11 12 9-2 4 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL 3 Pull out the grip of the saddle stitch holder ( ) to- ward you and turn it ( ) 90 o clockwise in the direc- tion of the arro w . 4 Remove the empty staple case and set a new one. - Replace both staple cases with new ones. - Do not remove the seal holding the stap[...]

1 2 3 4 5 6 7 8 9 10 11 12 9-2 5 When copies have not been stapled in the staple mode, and if the following message is shown on the displa y: Examine stapler staples hav e been jammed. Remov e them as described below . Finisher 1 P erf orm steps 1 to 5 of the pr ocedure f or “6. ADD- ING ST APLES Finisher ” ( P age 9-21) . 2 While pushing the b[...]

1 2 3 4 5 6 7 8 9 10 11 12 9-2 6 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL Saddle Stitch Unit (MJ-1020 only) 1 P erf orm steps 1 to 3 of the pr ocedure f or “ 6. ADD- ING ST APLES Saddle Stitch Unit ” ( Page 9-23) . 2 Remove the empty staple case. 3 While pushing down on the lever , pull up the knob . 4 Remove any jammed staples, and [...]

1 2 3 4 5 6 7 8 9 10 11 12 9-2 7 8. C LEARING A CCUMULA TED PUNCHED P APER BITS (OPTIONAL) When paper bits punched from copies ha ve accumulated to a certain lev el, the f ollo wing message appears. Please Dispose of Hole Punch Dust Dispose of the paper bits as described below . 1 Open the cover of the hole punch unit. 2 Holding the blac k handle, [...]

1 2 3 4 5 6 7 8 9 10 11 12 9-2 8 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL When the CALL SER VICE symbol flashes, the follo wing message appears and cop ying is no longer possible. Call your service technician. Call for service When the CALL SER VICE or CLEAR P APER symbol is flashing, if you press the c Clear ke y and the digital ke y 8 [...]

1 2 3 4 5 6 7 8 9 10 11 12 9-2 9 When the follo wing message has appeared on the display panel: Time for periodic maintenance (Colour) or Time for periodic maintenance (Black) this indicates that assistance from a qualified service technician is required. Call your service techni- cian for assistance. 10. PERIODIC MAINTENANCE MESSA GE ,[...]

1 2 3 4 5 6 7 8 9 10 11 12 9-3 0 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL[...]

1 2 3 4 5 6 7 8 9 10 11 12 10 -1 10. MAINTENANCE 1. Daily inspection ........................................................................ 10-2 2. Simple troubleshooting ............................................................. 10-4[...]

1 2 3 4 5 6 7 8 9 10 11 12 10 -2 MAINTENANCE 1. D AIL Y INSPECTION Items for Dail y Chec k Power switch ON/OFF status We recommend turning the power s witch ON at the startup ev eryday so that copies can be made when- ev er you want. Also, be sure to turn the power s witch OFF when you lea v e the office . In the follo wing cases, do not turn the p[...]

1 2 3 4 5 6 7 8 9 10 11 12 10 -3 Cleaning the Reversing Automatic Document Feeder (optional) If the scanning area is dirty , it ma y cause an original jam or result in dir ty copies. Also , if the original transpor t belt is dirty , the copies ma y become soild or the original size ma y be incorrectly detected. - Clean the scanning area and the ori[...]

1 2 3 4 5 6 7 8 9 10 11 12 10 -4 MAINTENANCE Is the copier in the energy saving mode (Automatic Energy Saving mode)? Is the access code keyed in? Is the access code correct? Is a key copy counter (optional) used? Is the “Warming up” message displayed? Does the administrator password input screen appear? Is interrupt copying set? Reference page [...]

1 2 3 4 5 6 7 8 9 10 11 12 10 -5 Items to be checked Has the message “Install new *** toner cartridge” appeared on the screen? Is the copy density or the back- ground adjustment set lighter than is standard? Is the original cover or the op- tional reversing automatic docu- ment feeder firmly closed? Is the original glass dirty? Is the original [...]

1 2 3 4 5 6 7 8 9 10 11 12 10 -6 MAINTENANCE Has the message “Install new *** toner cartridge” appeared on the screen? Has the “CALL SER VICE” mes- sage appeared on the screen? Is the paper moist? Is the level of the image density and the colour adjustment cor- rect? Are there functions that cannot be combined set together? Reference page R[...]

1 2 3 4 5 6 7 8 9 10 11 12 11 -1 11. SPECIFICA TIONS & OPTIONS 1. e-STUDIO210c/310c specifications ......................................... 11-2 2. Specifications of options .......................................................... 11-5 3. P ac king list ............................................................................ 11-10 4. Cop[...]

1 2 3 4 5 6 7 8 9 10 11 12 11 -2 SPECIFICA TIONS & OPTIONS Model Name FC-210/310 T y pe Console type Ori gi na l Gl as s Fixed Copying System Laser electronic copying Developing System Dry developing (2-component) Fixing Method Belt fusing Photosensor T ype OPC (organic photoconductive) drum Original Scanning System Linear CCD sensor Resolution[...]

1 2 3 4 5 6 7 8 9 10 11 12 11 -3 Image Quality Density Control Manual adjustment (11 density steps) and automatic adjustment Image Control Hue, Saturation, Colour balance (YMCK adjustment), RGB adjustment, Sharpness, Background adjustment and One-touch adjustment Additional Functions Automatic paper selection, Automatic magnification selection, Int[...]

1 2 3 4 5 6 7 8 9 10 11 12 11 -4 SPECIFICA TIONS & OPTIONS Mode P aper Siz e Feeder e-STUDIO210c e-STUDIO310c Full colour Black Full colour Black A4, B5, A5-R, Cassette 2 1 sheets/min. 31 sheets/min. 31 sheets/min. L T , ST -R, 8.5”SQ Large-capacity feeder(A4) Bypass 21 sheets/min. 24 sheets/min. 24 sheets/min. A4-R, B5-R, Cassette 17 sheets/[...]

1 2 3 4 5 6 7 8 9 10 11 12 11 -5 2. SPECIFICA TIONS OF OPTIONS Reversing Automatic Document Feeder Model Name MR-3006E Copy Sides Single-side, Duplex Number of Originals (A4) 50 originals (64~90g/m 2 ), 40 originals (91~105g/m 2 ) Feeding Speed (A4, single-side) 25 originals/min. Acceptable Originals A3~A5-R, LD~ST -R (A5 and ST are not acceptab le[...]

1 2 3 4 5 6 7 8 9 10 11 12 11 -6 SPECIFICA TIONS & OPTIONS Additional Cassette Module Model Name MY -1020 Acceptable P aper A3~A5-R, LD~ST -R (A5 and ST are not acceptab le) P aper W eight: 64~163 g/m 2 Maximum Capacity 600 sheets (90g/m 2 ) Dimensions 636mm(W) x 626mm(D) x 110mm(H) Weight Approx. 5kg 2. SPECIFICA TIONS OF OPTIONS (Cont.) Large[...]

1 2 3 4 5 6 7 8 9 10 11 12 11 -7 Finishers Model Name MJ-1019 MJ-1020 T ype Floor type Floor type Acceptable Paper A3-wide~A5-R, LD~ST -R (A5 and ST are not acceptable) P aper weight: 64~256g/m 2 Number of Copies 80g/m 2 90g/m 2 105g/m 2 Stapled at a Time A4, B5, L T 50 sheets 30 sheets 30 sheets (For both models) A3,A4-R,B4,FOLIO 30 sheets 15 shee[...]

1 2 3 4 5 6 7 8 9 10 11 12 11 -8 SPECIFICA TIONS & OPTIONS 1,2 x x Whichever of 74mm, 500 sheets or 50 cop- ies is reached first. Whichever of 74mm, 500 sheets or 50 cop- ies is reached first. Staples loaded Mixed paper loaded Finishers (Cont.) T ra y Loading Capacity ...*The tra y loading capacity is determined by the loading height as below .[...]

1 2 3 4 5 6 7 8 9 10 11 12 11 -9 * Specifications and appearance are subject to change without notice in the interest of product improvement. Network Scanning Function ( the optional GA-1020/GA-1030 is required to be installed) * See the Operator’ s Manual f or the Pr inter Controller (User Document CD-R OM) f or the specifications of the printer[...]

1 2 3 4 5 6 7 8 9 10 11 12 11 -1 0 SPECIFICA TIONS & OPTIONS Photoconductive Drum Copy Receiving T r a y Pac king List DF Level-up Kit Unpacking Instructions Operator’ s Manual P oc k et Set-up Instructions Customer Satisfaction Card Detachable Cords 3. P A CKING LIST[...]

1 2 3 4 5 6 7 8 9 10 11 12 11 -1 1 4. COPYING FUNCTION COMBINA TION MA TRIX Function set last Original mode selection 2 1 Y : The functions can be combined. F : The functions cannot be combined. (The function set first takes precedence.) S : The functions cannot be combined. (The function set last takes precedence.) *1: Available if paper size is s[...]

1 2 3 4 5 6 7 8 9 10 11 12 11 -1 2 SPECIFICA TIONS & OPTIONS 5. IMA GE QU ALITY ADJUSTMENT COMBINA TION MA TRIX Manual S Y Y Y Y Y Y Y Y Y S Y Auto S Y Y Y Y Y Y Y Y Y F Y Monocolour Y Y F F F F F F F F Y Y Hue Y Y F Y Y Y F F F F Y Y Saturation Y Y F Y Y Y F F F F Y Y Colour balance Y Y F Y Y F F F F F Y Y RGB Y Y F Y Y F F F F F Y Y Vivid Y Y[...]

1 2 3 4 5 6 7 8 9 10 11 12 11 -1 3 6. INDEX Numbers 1-Sided Originals to 1-Sided Copies 3-8 1-Sided Originals to 2-Sided Copies 3-9 2 IN 1/4 IN 1 Copying 5-9 2-Sided Originals to 1-Sided Copies 3-10 2-Sided Originals to 2-Sided Copies 3-10 2IN1 Duplex Copying 5-10 305x457mm key 6-7 4IN1 Duplex Copying 5-10 A A3-wide paper 6-5 , 6-7 , 6-10 Acceptabl[...]

1 2 3 4 5 6 7 8 9 10 11 12 11 -1 4 SPECIFICA TIONS & OPTIONS 6. INDEX (Cont.) Copy density adjustment 3-13 COPY FINAL P AGE k e y 3-12 COPY JOB REQUEST key 2-16 Copy paper maximum capacity 2-4 types and sizes 2-4 Copy receiving tray 9-12 , 9-15 Copying function combination matrix 11-11 Copying procedure 2-2 Copying speed 11-4 D Daily Inspection[...]

1 2 3 4 5 6 7 8 9 10 11 12 11 -1 5 MEMOR Y CLEAR k e y 2-18 MEMOR Y ke y 6-9 , 6-12 Memory Number key 6-13 Message display 1-6 Mirror Image mode 5-16 Mixed-sized originals 6-4 Mode Memory 6-12 N Negative/P ositive Re versal 5-17 O Off-mode 1-11 OHP FILM 6-5 OHP film 2-4 , 2-5 , 2-6 , 3-3 , 3-4 , 6-11 One-touch Adjustment 4-7 One-touch Zoom K e ys 3[...]

1 2 3 4 5 6 7 8 9 10 11 12 11 -1 6 SPECIFICA TIONS & OPTIONS 6. INDEX (Cont.) Setting Access Codes 6-24 Automatic Energy Saving mode 6-31 Automatic Shutoff mode 6-32 cassette for special uses 2-6 copy paper 2-4 Date and Time 6-20 Da ylight Saving Time 6-20 ON/OFF times 6-18 originals 2-9 other size 6-15 Sharpness Adjustment 4-9 SHUTDOWN key 8-1[...]

3 PERIODIC MAINTENANCE PREVENT A TIVE MAINTENANCE T oshiba copiers are manufactured to the highest technical standards , using quality parts and compo- nents, and are designed to meet all electrical safety and environmental requirements. T o ensure that optimum lev els of perf or mance and reliability are maintained, we strongly advise that your ma[...]

1-1, KAND A NISHIKI-CHO , CHIY OD A-KU , T OKY O , 101-8442, JAP AN Recycled paper is used f or the inside pages of this book. This Operator's Manual is printed with ink containing so ya bean oil. © Cop yr ight T OSHIBA TEC CORPORA TION 2002 ALL RIGHTS RESER VED 442171650A0 R0110203800-TTEC 02-01 AB OPERA T OR'S MANU AL FOR COPYING FUNCT[...]