Toshiba B-EX4T1 Bedienungsanleitung

TOSHIBA Barcode Printer B-EX4T1 SERIES Owner’s Manual Mode d’emploi Bedienungsanleitung Manual de instrucciones Gebruikershandleiding Manuale Utente Manual do Utilizador[...]

Copyright © 2011 by TOSHIBA TEC CORPORATION A ll Rights Reserved 570 Ohito, Izunokuni-shi, Shiz uoka-ken, JAPAN < For EU Only > TOSHIBA TEC Europe Retail Information Systems S.A. Rue de la Célidée 33 BE-1080 Brussels CE Compliance (for EU only) This product complies with the requirements of EMC and Low Voltage Directives including their am[...]

TOSHIBA Barcode Printer B-EX4T1 SERIES Owner's Manual[...]

Waste Recycling information for users: Following information is only for EU-member states: The use of the crossed-out wheeled b in symbol indicates that this product may not be treated as general household waste. By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human hea[...]

Precautions for Handling of Wi reless Communication Devices Wireless LAN Module: SD-Link 1 1g RFID Module: TEC-RFID-EU1 (B-EX700-RFID-H1-QM-R), TRW -USM-01 (B-EX700-RFID-U2-US-R), TR W -EU M-01 (B -EX 700-R FID- U2-E U-R), TR W -CNM-01 (B -EX 700-RF ID-U 2-CN -R) For Europe This device was tested and certified by N otified Body . Hereby , T oshiba [...]

Safety Summary ENGLISH VERSION ( ) i Safety Summary Personal safety in handling or maintaining the equipmen t is extrem ely important. Warnings and Cautions necessary for safe handling are included in this manual. All warnings and cautions contained in this manual should be read and underst ood before handling or maintaining the equipm ent. Do not [...]

Safety Summary ENGLISH VERSION ( ) ii If foreign objects (metal fragments, water, liquids) enter the machines, first turn off the power switches and disconnect the power cord plugs from the outlet, and then contact your authorised TOSHIBA TEC representative for assistance. Continued use of the machine in that condition may cause fire or electric sh[...]

ENGLISH VERSION EO1-33089 TABLE OF CONTENTS Page 1. PRODUCT OVERVIEW ......................................................................................................... E1- 1 1.1 Introduction .............................................................................................................. ..... E1- 1 1.2 Features ................[...]

ENGLISH VERSION EO1-33089 2.9 Position and Print Tone Fine Adjustment ................................................................... E2-60 2.9.1 Fine Ad justment ..................................................................................................... E2- 60 2.10 Threshold Setting ...................................................[...]

1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33089 1.1 Introduction E1- 1 1. PRODUCT OVERVIEW 1.1 Introduction 1.2 Features 1.3 Unpacking Thank you for choosing the TOSHIBA B- EX4T1 series bar code printer. This Owner’s Manual contains from general set-up through h ow to confirm the printer operation using a test print, and should be read carefully to[...]

1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33089 1.4 Accessories E1- 2 1.4 Accessories When unpacking the printer, please make sure all the following accessories are supplied with the printer.  Power cord  Safety precautions  Quick installation manual[...]

1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33089 1.5 Appearance E1- 3 1.5 Appearance 1.5.1 Dimensions 1.5.2 Front View 1.5.3 Rear View The names of the parts or units introdu ced in this section are used in the following chapters. 278 (10.9) 460 (18.1) Dimensions in m m (inches) 310 (12.2) Top Cover Media Outlet Supply Window LCD Message Displa y Oper[...]

1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33089 1.5 Appearance E1- 4 1.5.4 Operation Panel 1.5.5 Interior Please see Section 3 for further information about the Operation Panel. LCD ERROR LED PAUSE RESTART UP RIGHT ENTER DOWN CANCEL MODE LEFT FEED ONLINE LED Print Head Platen Head Lever Ribbon Shaft Supply Shaft Supply Holder Locking Ring Ribbon Stop[...]

1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33089 1.6 Options E1- 5 1.6 Options Option Name Type Description Disc cutter module B-EX204-QM-R Disc cutter Each time m edia is cut, the media feed is stopped. Rotary cutter module B-EX204-R-QM-R Rotary cutter On-the-fly (non-stop) cut operation is enabled. Strip module B-EX904-H-QM-R This allows use of on-d[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2. PRINTER SETUP E2- 1 2. PRINTER SETUP This section outlines the procedures to setup your printer prior to its operation. The section includes precautions, loading media and ribbon, connecting cables, setting the operating environm ent of the printer, and performing an online print test. Reference Procedu[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.1 Installation E2- 2 2.1 Installation To insure the best operating environment, and to assure the safety of the operator and the equipment, please observe the following precautions. • Operate the printer on a stable, level, operating surface in a location free from excessive humidity, high temperature,[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.2 Connecting the Power Cord E2- 3 2.2 Connecting the Power Cord 1. Make sure that the printer Power Switch is in the OFF ( { ) position. Connect the Power Cord to the pr inter as shown in the figure below. 2. Plug the other end of the Power Cord into a grounded outlet as shown in the figure below. [Examp[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.3 Loading Supplies E2- 4 2.3 Loading Supplies 1. Do not touch any moving parts . To reduce the risk of fingers, jewellery, clothing, etc., being drawn into the moving parts, be sure to l oad the media once the pr inter has stopped moving completely. 2. The Print Head becomes hot immediately after prin ti[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.3 Loading Supplies E2- 5 2.3.1 Loading the Media The following procedure shows the step s to properly load the media into the printer so that it feeds straight and true through the printer. The printer prints both labels and tags. 1. Turn off the power and open the Top Cover. 2. Turn the Head Lever to FR[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.3 Loading Supplies E2- 6 2.3.1 Loading the Media (Cont.) 7. Align the projection of the Supply Holder with the groove of the Supply Shaft, and push the Supply Holder against the media until the media is held firmly in place. This will centre the media automatically. Then turn the Locking Ring clockw ise [...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.3 Loading Supplies E2- 7 2.3.1 Loading the Media (Cont.) 10. Lower the Print Head Block until it stops. 11. After loading the media, it may be necessary to set the Media Sensors used to detect the print start position for label or tag printing. Setting the Feed Gap Sensor position (1) Manually move the M[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.3 Loading Supplies E2- 8 2.3.1 Loading the Media (Cont.) 12. Batch mode In the batch mode, the media is continuously printed and fed until the number of labels/tags specified in the issue comm and have been printed. 13. Loading with peel off module When the optional Strip Module is fitted, the backing pa[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.3 Loading Supplies E2- 9 2.3.1 Loading the Media (Cont.) 14. Loading with cutter When the optional Cutter Module is fitted, the media is automatically cut. A disc cutter and a rotary cutter are available as an option, but they are used in the same way. Insert the leading edge of the media into the cutter[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.3 Loading Supplies E2-10 2.3.2 Loading the Ribbon There are two types of media available for printing on: these are thermal transfer media and direct thermal m edia (a chemically treated surface). DO NOT LOAD a ribbon when using a direct thermal media. 1. Grasp the tabs on the top and bottom of the Ribbo[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.3 Loading Supplies E2-11 2.3.2 Loading the Ribbon (Cont.) 3. Slide the Ribbon Stoppers along the Ribbon Shafts to a position where the ribbon is centred when fitted. 4. Lower the Print Head Block and set the Ribbon Shaft Holder Plate aligning its holes with the Ribbon Shafts. 5. Take up any slack in the [...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.4 Connecting the Cables to Your Printer E2-12 2.4 Connecting the Cables to Your Printer The following paragraphs outline how to connect the cables from the printer to your host computer, and will also show how to make cable connections to other devices. De pending on the application software you use to p[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.5 Turning the Printer ON/OFF E2-13 2.5 Turning the Printer ON/OFF 2.5.1 Turning ON the Printer 2.5.2 Turning OFF the Printer When the printer is connected to your host computer it is good practice to turn the printer ON before turning on your host computer and turn OFF your host computer before turning o[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-14 2.6 Printer Setting Depending on the settings of your host computer or an interface to be used, it may be necessary to change the printer parameter settings. Follow the procedures described below to change the printer parameter settings to correspond to your environment. NOTE: I n[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-15 2.6 Printer Setting (Cont.) 2.6.1 User System Mode  Key functions in the system mode Key Function [MODE] Returns to the mode m enu screen. [CANCEL] or [FEED]+[RESTAR] Returns to the upper hierarchy. Displays a next screen. [ENTER] or [PAUSE] Saves the setting and returns to the[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-16 2.6.2 Parameter Setting The Parameter Set menu allows conf iguring printer parameter settings. The following table shows the contents of the Parameter Set menu. Contents of the Parameter Set Menu Menu Sub menu Parameter Printer Set MEDIA LOAD Parameter set (Section 2.6.2.1) FORWAR[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-17 2.6.2 Parameter Setting (Cont.) 2.6.2.1 Printer Set (1) MEDIA LOAD This parameter is to choose how the printer behaves to detect the home position. • OFF Media loading fun ction is disabled (Sam e as a feed by [FEED] key) • STD When the printer is tune d on, reset in batch, or[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-18 2.6.2 Parameter Setting (Cont.) (5) HU CUT/RWD. This parameter is to choose whether or not to activate the head up action in the cut issue or to use the Re winder in the batch or strip issue. This function prevents ribbon smudges by raising the print head during a reverse feed to [...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-19 2.6.2 Parameter Setting (Cont.) 2.6.2.2 Software Set (1) FONT CODE This parameter is to choose a character code used for printing. Pri nted characters differ depending on the chosen character code and font. • PC-850 • PC-852 • PC-857 • PC-8 • PC-851 • PC-855 • PC-125[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-20 2.6.2 Parameter Setting (Cont.) (5) PEEL OFF STATUS This parameter is to choose whether the printer sends a strip wait status to the host in response to a status request command. • OFF • ON (6) USB I/F STATUS This param eter is to choose whether or not to return a response to [...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-21 2.6.2 Parameter Setting (Cont.) (11) WEB PRINTER This parameter is to choose whether to use the printer as a web printer. When the web printer is enabled, the status of the printer connected to a network can be monitored through the web browser. • OFF Disables web printer functi[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-22 2.6.2 Parameter Setting (Cont.) (16) XML This parameter is to choose a ty pe of XML data to be printed. • OFF Disables XML data printing. • STD Standard specification • ORACLE Oracle • SAP SAP • STD EXT Standard specification (External memory) • ORACLE EXT Oracle using[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-23 2.6.2 Parameter Setting (Cont.) 2.6.2.3 PANEL (1) LCD LANGUAGE This parameter is to choose a language in which the LCD message is displayed. • ENGLISH • GERMAN • FRANCH • DUTCH • SPANISH • JAPANESE • ITALIAN • PORTUGUESE (2) MACHINE NAME This parameter is to choose[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-24 2.6.2 Parameter Setting (Cont.) 2.6.3 Enabling LAN/WLAN 2.6.4 Basic Program Setting 2.6.2.4 PASSWORD (1) PASSWORD This parameter is for system administrator only. Please do not change the setting for this parameter. The LAN/WLAN menu allows selecting whether or not to enable the L[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-25 2.6.4 Basic Program Setting (Cont.) 2.6.5 Enabling Z-Mode (3) TRACE This parameter is to choose whether to enable tracing the BASIC program. • O FF Disables tracing the BA SIC program. • ON Enables tracing the BASIC program. (4) EXPAND MODE The printer switches the mode to exe[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-26 2.6.6 Automatic Calibration The Auto Calibration menu allows selecting whether or not to enable the automatic calibration at a power on time. When the automatic calibration is activate, the printer feeds the media for about 160 mm each time the power is turned on or the top cover [...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-27 2.6.7 Dump Mode Setting In the Dump Mode, data in the receive buffer are printed. Data are expressed in hexadecimal values. Th is operation allows verification of the programming com mands or debug of the program. (1) BUFFER This parameter is to choose the receive buffer to dum p.[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-28 2.6.7 Dump Mode Setting (Cont.) The data in the receive buffer is printed as follows. Receive Buffer Size Interface 203 dpi 305 dpi RS-232C 6MB (393216 lines) 6MB (393216 lines) Centronics 6MB (393216 lines) 6MB (393216 lines) LAN 6MB (393216 lines) 6MB (393216 lines) BASIC 1 8KB [...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-29 2.6.8 Logging The Log menu allows saving print logs in a USB mem ory. (1) LOG • PRINTER TO USB Saves print logs in the USB m emory. A file is automatically created in the USB m emory and nam ed in the following format based on the printer m odel and saved date. /ATA0/LOG/B-EX4T1[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-30 2.6.9 System Mode How to enter the System Mode The System Mode consists of the following menus. <1>DIAG. Used to check a nd print the pri nter system information and maintenance counter status. <2>PARAMETER SET ( ⇒ Section 2.6.2 ) Used to set the parameters for each [...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-31 2.6.10 Interface Setting The Interface menu allows configuring printer interface parameters. The following table shows the contents of the Interface menu. Contents of the Interface Menu Menu Sub menu Parameter NETWORK LAN/WLAN Interface SNMP SETTING BASIC INFORMATION IP ADDRESS GA[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-32 2.6.10 Interface Setting (Cont.) 2.6.10.1 Network Setting (1) LAN/WLAN • OFF LAN and Wireless LAN are disabled. • ON (AUTO) Automatically selected. • ON (LAN) LAN is enabled. • ON (WLAN) Wireless LAN is enabled. (2) SNMP • OFF SNMP is disabled. • ON SNMP is enabled. (3[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-33 2.6.10 Interface Setting (Cont.) (8) PORT NUMBER (9) DHCP • OFF DHCP is disabled. • ON DHCP is enabled . (10) DHCP CLIENT ID • ASCII DHCP client ID is entered with ASCII code. → c • HEX DHCP client ID is entered with Hex. code. → d c When ASCII is selected: Enter 64 ch[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-34 2.6.10 Interface Setting (Cont.) (13) WLAN MODE This parameter is to choose the connection m ode and authentication. ADHOC OPEN OFF WEP40 WEP104 SHARED Not used WEP40 WEP104 INFRA OPEN OFF WEP40 WEP104 SHARED WEP40 WEP104 802.1x OPEN TLS WEP40 WEP104 TTLS WEP40 WEP104 LEAP WEP40 W[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-35 2.6.10 Interface Setting (Cont.) (14) DEFAULT KEY This parameter is to choose a WEP key. (15) 802.11b CHANNEL This parameter is to choose a channel for 802.11b WLAN. (16) 802.11b BAUD This parameter is to choose a baud rate for 802.11b WLAN. • 11M • 5.5M • 2M • 1M (17) 802[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-36 2.6.10 Interface Setting (Cont.) (19) WLAN POWER SAVE This parameter is to choose whether to e nable the power save fun ction while WLAN com munication. • OFF Power save function is disabled. • ON Power save function is enabled. (20) WINS • OFF WINS is disabled. • ON (MANU[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-37 2.6.10 Interface Setting (Cont.) (2) DATA LENGTH • 8 bits • 7 bits (3) STOP BIT • 1 bit • 2 bits (4) PARITY • NONE • EVEN • ODD (5) CONTROL • XON+READY AUTO XON/XOFF mode • XON+XOFF AUTO XON/XOFF+READY/BUSY mode • READY/BUSY RTS RTS mode • XON+XOFF XON/XOFF m[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-38 2.6.11 Real Time Clock (RTC) The RTC menu allows setting the da te and time, enabling the battery check function, and selecting the RTC data renewal timing while printing. The Real Time Clock Setting is e ffective only when an optional RTC & USB Host Interface Card, B-EX700-RT[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting E2-39 2.6.12 Copying Data to/from USB Memory The USB Memory menu allows copying data from a USB memory to the printer and saving data from the printer to a USB mem ory. USB memory can be used only wh en an optional RTC & USB Host Interface Card, B-EX700-RTC-QM-R, is installed. (1) U[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.7 Installing the Printer Drivers E2-40 2.7 Installing the Printer Drivers 2.7.1 Introduction This chapter describes how to install the TOSHIBA prin ter driver for the TOSHIBA bar code printer on your Windows host computer; install and delete the printer dr iver, the procedure for adding the LAN port, cau[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.7 Installing the Printer Drivers E2-41 2.7.4 Preparation for Installation (1) Access T oshiba TEC web site at the following addr ess and download the printer driver install file “TPCL72M2E.exe” to the local disc. http://www.toshibatec-ris.com/products/barcode/download/driver_agreement.htm l Note : If[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.7 Installing the Printer Drivers E2-42 (3) The “Software License Agreement” is displayed. Select “I accept the terms of the license agreement” and click the [Next] button. Note : If you do not agree with the Software License Agreement, you cannot download the file. (4) When you click the [Install[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.7 Installing the Printer Drivers E2-43 2.7.5 Installation under Window s 2000/XP/Server2003 (1) Turn on the PC. Note : Log on as the user with administrative privilege. (2) Select the “Start”, “Printer and F AX” to show the printer folder . Supplement : In the case of W indows 2000, select “Sta[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.7 Installing the Printer Drivers E2-44 (5) Select the “Local printer attached to this computer” and click the [Next] button. Note : Do not check the “Automatically detect and install my Plug and Play printer” checkbox. Even in the case of specifying the network printer or a printer connected to o[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.7 Installing the Printer Drivers E2-45 (8) Specify the printer driver install folder (C:/TEC_DR V) created in Section 2.7.4 Preparation for Inst allation , and click the [Open] button. Select the “TEC.inf” and click the [OK] button. (9) The list of the installable printer is display ed. (10) Select t[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.7 Installing the Printer Drivers E2-46 (12) Select whether or not to use the printer as a default printer , then click the [Next] button. (13) Select whether or not to share the printer with other users on the network, then click the [Next] button. (14) Select whether or not to perform a print test, then[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.7 Installing the Printer Drivers E2-47 (15) When the “Com pleting the Add Printer W izard” is displayed, click the [Finish] button. (16) When the screen on the right appears, click the [Continue Anyway] button. Note : “Digital Signatur e Not Found” message may be displayed. In that case, click th[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.7 Installing the Printer Drivers E2-48 2.7.6 Installation under Windows Vist a/Server2008/7/Server2008R2 (1) Turn on the PC. Note : Log on as the user with administrative privilege. (2) Select “Start”, “Control Panel”, “Hardware a nd Sound”, and “Printer” to open the printer folder . Supp[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.7 Installing the Printer Drivers E2-49 (6) When the screen on the right appears, select “TEC” from the Manufacturer list. (7) The list of the installable printer models are displayed. (8) Select a model to be installed, then click the [Next] button. (9) Select the “Replace the current driver”, an[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.7 Installing the Printer Drivers E2-50 (10) Select whether or not to use the printer as a default printer , then click the [Next] button. (1 1) Installation starts. (12) When the installation is completed, the “Add Printer” screen is displayed. At this time, a new printer icon is added to the “Prin[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.7 Installing the Printer Drivers E2-51 2.7.7 Installation under Windows 2000 (USB w ith Plug & Play Enabled) (1) Turn on the PC. Note : Log on as the user with administrative privilege. (2) Turn on the printer and connect it to the PC with a USB cable. (3) “USB DEVICE” is detected and “USB Pr i[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.7 Installing the Printer Drivers E2-52 (7) Click the [Browse] button. Specify the folder (C:TEC_DR V) created in Section 2.7.4 , and click the [Next] button. (8) Make sure the driver of this device has been detected, then click the [Next] button. (9) When the screen on the right is display ed, click the[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.7 Installing the Printer Drivers E2-53 2.7.8 Installation under Windows XP/Server2003 (USB w ith Plug & Play enabled) (1) Turn on the PC. Note : Log on as the user with administrative privilege. (2) Turn on the printer , and connect it to the PC with a USB cable. (3) “USB DEVICE” is detected, and[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.7 Installing the Printer Drivers E2-54 (8) When the “Completing the Found New Hardware Wizard” is displayed, click the [Finish] button. (9) When the installation is completed, a new printer icon is added to the Printer folder . 2.7.9 Installation under Window s Vista/Server 2008/7/Ser ver2008R2 (USB [...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.7 Installing the Printer Drivers E2-55 2.7.10 Uninstalling the Printer Driver 1) T o delete the printer drivers except for V6.5 Build75 and V6.5 Build77 In the following cases, be sure to uninstall the printer driver using the procedure below . • When the same version is installed again. • When an ol[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.7 Installing the Printer Drivers E2-56 (3) Select the “Automatically remove all TEC Printer Drivers”, and click the [Next] button. (4) Click the [Finish] button to start to delete the printer drivers. (5) When the “Restart System” screen is displayed, click the [Restart] button. (6) When the prin[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.7 Installing the Printer Drivers E2-57 V ista/server 2008/7/Server2008R2, it is not possible to delete the printer driver . First, delete the printer icon fr om each user account, then delete the printer driver . z Deleting the setup information configured during the prep aration (1) Select the “Start?[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.8 Print Test E2-58 2.8 Print Test After your operating environment has been set, perform a print test. 1. Perform a print test by using the Printer Driver or an Issue Comm and. The printer driver’s Properties screen allows you to set the communication conditions, media size, and other printing conditi [...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.8 Print Test E2-59 2.8 Print Test (Cont.)  When using a Strip Module or an optional Cutter Module It is necessary to set the issue mode, cut/strip position, etc. on the Printer Driver or with TPCL (TEC Printer Command Language) in acco rdance with your printing condition. For details of the TPCL, refe[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.9 Position and Print Tone Fine Adjustment E2-60 2.9 Position and Print Tone Fine Adjustment 2.9.1 Fine Adjustment This section describes how to fine adju st a print start position, cut/strip position, reverse feed amount, print tone, and ribbon motor torque. When a fine adjustment is required, follow the[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.9 Position and Print Tone Fine Adjustment E2-61 2.9.1 Fine Adjustment(Cont.) (1) FEED ADJ. Print start position is shifted by fine adjusting the feed amount. • Example of Print Start Position Fine Adjustment When setting +3.0 mm Compared with “+0.0mm” position, the print start position is shifted f[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.9 Position and Print Tone Fine Adjustment E2-62 2.9.1 Fine Adjustment(Cont.) (2) CUT ADJ. Cut position or peel-off position is shifted by fine adjusting the feed amount. • Example of Peel-off Position Fine Adjustment When setting +3.0 mm Compared with “+0.0mm” position, the peel-off position is shi[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.9 Position and Print Tone Fine Adjustment E2-63 2.9.1 Fine Adjustment(Cont.) (3) BACK ADJ. Reverse feed amount to the next print start position is fine adjusted. • Example of Reverse Feed Amount Fine Adjustment When setting +3.0 mm Compared with “+0.0mm” position, the print start position after a r[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.9 Position and Print Tone Fine Adjustment E2-64 2.9.1 Fine Adjustment(Cont.) (4) X ADJUST Print position in X-coordinate (horizont al direction) is fine adjusted. ABC ABC ABC 50.0mm 50.0mm Top Down Printing X Y Bottom First Printing X Y 99.5mm -99.5mm 99.4mm -99.4mm • Example of X Coordinate Fine Adjus[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.9 Position and Print Tone Fine Adjustment E2-65 2.9.1 Fine Adjustment(Cont.) (5) TONE ADJ.(TRANS.) Print tone for the thermal transfer printing is fine adjusted. (6) TONE ADJ.(DIRECT.) Print tone for the direct thermal printing is fine adjusted. (7) RBN ADJ.<FW> When the ribbon is slack or wri nkle[...]

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.9 Position and Print Tone Fine Adjustment E2-66 2.9.1 Fine Adjustment (Cont.) (8) RBN ADJ.<BK> When the ribbon is slack or wri nkled and printing is affected, fine adjust the ribbon motor torque. (9) THRESHOLD <REFL.> When you perform a threshold setting for the reflective sensor and found th[...]

2.PRINTER SETUP ENGLISH VERSION EO1-33089 2.10 Threshold Setting E2-67 2.10 Threshold Setting To maintain a constant print position the printer uses the media sensor to detect a print start position according to the difference of voltage between a print area and a gap or black mark. When the media is pre-printed, the darker (or more dense) inks can[...]

2.PRINTER SETUP ENGLISH VERSION EO1-33089 2.10 Threshold Setting E2-68 2.10 Threshold Setting (Cont.) Display example Explanation 1 Result: OK (Mid.) Threshold is at the m idpoint between the peak and the baseline. 2 Result: OK (High) Threshold is near the peak voltage. Adjusting the threshold to t he midpoint between the peak and the baseline enab[...]

2.PRINTER SETUP ENGLISH VERSION EO1-33089 2.11 Sensor Setting E2-69 2.11 Sensor Setting If a paper jam error still occurs even after a threshold setting has been performed, register the voltage level of media to the m edia sensor. Contents of the Sensor Adjust Menu Menu Parameter TEMPERATURE Displays the ambient temperature and print head temperatu[...]

2.PRINTER SETUP ENGLISH VERSION EO1-33089 2.11 Sensor Setting E2-70 2.11 Sensor Setting (Cont.) (1) REFLECT 1. Select “REFLECT” from the Sensor Adjust menu. 2. Place the tag paper to be used on the reflective sensor so that the sensor can detect a print area. 3. Hold down the [ENTER] for 3 seconds or more. 4. When registration of the “print a[...]

3. ON LINE MODE ENGLISH VERSION EO1-33089 3.1 Key Functions E3- 1 3. ON LINE MODE 3.1 Key Functions This chapter describes usage of the ke ys on the Operation Panel in On Line mode. When the printer is in On Line mode and connected to a host com puter, the normal operation of printing im ages on labels or tags can be accomplished.  Key functions[...]

3. ON LINE MODE ENGLISH VERSION EO1-33089 3.2 LCD E3- 2 3.2 LCD Online state Error state No. Description (1) Model name and firmware version (2) Message (3) The number of labels printed (4) IP address (only when LAN/WLAN is enabled.) (5) Radio intensity (only when WLAN is enabled.) Indicates the radio intensity in 4 levels. (6) WLAN connection (onl[...]

3. ON LINE MODE ENGLISH VERSION EO1-33089 3.3 Operation Example E3- 3 3.3 Operation Example  Online Mode Idling or normal issuing Printing is stopped. Help guide is displayed . Help guide message for head open Printing is stopped and Help guide is displayed. Help guide message for no paper If the print head is opened during idling: If an error o[...]

3. ON LINE MODE ENGLISH VERSION EO1-33089 3.3 Operation Example E3- 4 3.3 Operation Example (Cont.)  Help Guide Message Idling or normal issuing Printing is stopped and Help guide is displayed. Cause of the error Troubleshooting How to restore to online If an error occurs while p rintin g : Load media. When [RESTART] key is pressed, the printer [...]

3. ON LINE MODE ENGLISH VERSION EO1-33089 3.3 Operation Example E3- 5 3.3 Operation Example (Cont.)  Cancellation of Print Job Idling or normal issuing If an error occurs while printing: When [PAUSE] key is pressed while printing: Hold down [CANCEL] for 3 sec. or more. Hold down [CANCEL] for 3 sec. or more. While [CANCEL] is held down, the recei[...]

4. MAINTENANCE ENGLISH VERSION EO1-33089 4.1 Cleaning E4- 1 4. MAINTENANCE 4.1 Cleaning 4.1.1 Print Head/Platen/ Sensors This chapter describes how to perform routine ma intenance. To ensure the continuous high qualit y operation of the printer, you should perform a regular maintenance routine. For high throughp ut it should be done on a daily basi[...]

4. MAINTENANCE ENGLISH VERSION EO1-33089 4.1 Cleaning E4- 2 4.1.1 Print Head/Platen/ Sensors (Cont.) 4.1.2 Covers and Panels 6. Clean the Print Head Element with a Print Head Cleaner or a cotton swab or soft cloth slightly moistened with alcohol. 7. Wipe the Platen, Feed Roller, a nd Pinch Roller with a soft cloth slightly moistened with alcohol. R[...]

4. MAINTENANCE ENGLISH VERSION EO1-33089 4.1 Cleaning E4- 3 4.1.3 Optional Cutter Module The disc cutter and rotary cutter are available as an option. They are both cleaned in the same way. When re moving the Cutter Cover of the rotary cutter unit, remove the screws from the bottom of the cover. 1. Loosen the two Plastic Head Scre ws to rem ove the[...]

5. TROUBLESHOOTI NG ENGLISH VERSION EO1-33089 5.1 Error Messages E5- 1 5. TROUBLESHOOTING This chapter lists the error messages, possible problems, and their solutions. 5.1 Error Messages Error Messages Problems/Causes Solutions HEAD OPEN The Print Head Block is opened in Online mode. Close the Print Head Block. HEAD OPEN **** Feeding or printing h[...]

5. TROUBLESHOOTI NG ENGLISH VERSION EO1-33089 5.1 Error Messages E5- 2 5.1 Error Messages (Cont.) Error Messages Problems/Cause Solutions 1. The media is jamm ed in the cutter. 1. Rem ove the jammed m edia. Then press the [RESTART] key. If this does not solve the problem, turn off the printer, and call a TOSHIBA TEC authorised service representativ[...]

5. TROUBLESHOOTI NG ENGLISH VERSION EO1-33089 5.1 Error Messages E5- 3 5.1 Error Messages (Cont.) Error Messages Problems/Cause Solutions 1. The printer is used in a location where it is subject to noise. Or, there are power cords of other electrical appliances near the printer or interface cable. 1. Keep the printer and the interface cables away f[...]

5. TROUBLESHOOTI NG ENGLISH VERSION EO1-33089 5.2 Possible Problems E5- 4 5.2 Possible Problems This section describes problems that may occur when using the printer, and their causes and solutions. Possible Problems Causes Solutions 1. The Power Cord is disconnected. 1. Plug in the Power Cord. 2. The AC outlet is not functioning correctly. 2. Test[...]

5. TROUBLESHOOTI NG ENGLISH VERSION EO1-33089 5.3 Removing Jammed Media E5- 5 5.3 Removing Jammed Media This section describes in detail how to remove jamm ed media from the printer. 1. Turn off and unplug the printer. 2. Open the Top Cover. 3. Turn the Head Lever to Free position, then open the Ribbon Shaft Holder Plate. 4. Open the Print Head Blo[...]

6. PRINTER SPECIFICATIONS ENGLISH VERSION EO1-33089 6. PRINTER SPECIFICATIONS E6- 1 6. PRINTER SPECIFICATIONS This section describes the printer specifications. Model Item B-EX4T-GS12-QM-R/CN-R B-EX4T-TS12-QM-R/CN-R Dimension (W x D x H) 278 mm x 460 mm x 310 mm (10.9” x 18.1” x 12.2”) Weight (kg) 17 kg Operating temperature range 5 degC to 4[...]

6. PRINTER SPECIFICATIONS ENGLISH VERSION EO1-33089 6. PRINTER SPECIFICATIONS E6- 2 Model Item B-EX4T-GS12-QM-R/CN-R B-EX4T-TS12-QM-R/CN-R Bar code types JAN8, JAN13, EAN8, EA N8+2 digits, EAN 8+5 digits, EAN13, EAN 13+2 digits, EAN13+5 digits, UPC-E, UPC- E+2 digits, UPC-E+5 digits, UPC-A , UPC-A+2 digits, UPC-A+5 digits, MSI, ITF, NW-7, CODE39, C[...]

7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33089 7.1 Media E7- 1 7. SUPPLY SPECIFICATIONS 7.1 Media Please make sure that the media being used is approve d by TOSHIBA TEC. The warranty does not apply when a problem is caused by using media that is not approved by TOSHIBA TEC. For information regarding TOSHIBA TEC approved medi a, please contact a[...]

7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33089 7.1 Media E7- 2 B-EX4T-TS12-QM-R [Unit: mm ] Cut mode Rotary cutter Label dispensing mode Item Batch mode Strip m ode Head-up disabled Head-up enabled Disc cutter Label 10.0 – 1500.0 25.4 – 256.0 3”/s.: 94.0 - 1500.0 5”/s.: 102.0 – 1500.0 8”/s.: 113.0 – 1500.0 38.0 – 1500.0 25.4 –[...]

7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33089 7.1 Media E7- 3 7.1.2 Detection Area of the Transmissive Sensor The Transmissive Sensor is movable from the centre to the left edge of media. The Transmissive Sensor detects a ga p between labels, as illustrated below. <Label> <Tag paper with square holes> Sensor position A rea to be de[...]

7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33089 7.1 Media E7- 4 7.1.3 Detection Area of the Reflective Sensor The Reflective Sensor is movable from the centre to the left edge of m edia. The reflection factor of the Black Mark must be 10% or lower with a waveform length of 950 nm. The Reflective Sensor should be aligned with the centre of the Bl[...]

7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33089 7.1 Media E7- 5 7.1.5 RFID Tags Available RFID tag types are different depending on the RFID modules, as follows:  B-EX700-RFID-U2-US-R and B-EX700-RFID-U2-EU-R • EPC UHF Gen2 • ISO-18000-6C  B-EX700-RFID-H1-QM-R • TAGSYS C210 • TAGSYS C220 • TAGSYS C240 • TAGSYS C320 (Only when t[...]

7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33089 7.1 Media E7- 6 (7) Printing on Bump (Chip/Antenna) Area Embedding an RFID tag in labels creates bumps on the label surface, causing incomplete printing. Uneven printing or incomplete printing can occur easily, especially within 5 mm back and forth, and right and left sides of the RFID-tag embedded[...]

7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33089 7.2 Ribbon E7- 7 7.2 Ribbon Please make sure that the ribbon being used is approved by TOSHIBA TEC. The warranty does not apply to any problem caused by using non-approved ribbons. For information regarding TOSHIBA TEC appr oved ribbon, please contact a TOSHIBA TEC service representative. Type Spoo[...]

7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33089 7.4 Care/Handling of Media and Ribbon E7- 8 7.3 Recommended Media and Ribbon Types (Cont.) Ribbon type Description Smear-less ribbon (Wax resin ribbon) Good match for coated paper. The printed image will resist water and light rubbing. Scratch and solvent resistance ribbon Very good match for plast[...]

APPENDIX 1 MESSAGES AND LEDS ENGLISH VERSION EO1-33089 APPENDIX 1 MESSAGES AND LEDS EA1- 1 APPENDIX 1 MESSAGES AND LEDS Appendix 1 describes the LCD messages displayed on the operation panel. Symbols in the message 1:  : The LED is illuminated. ~ : The LED is flashing. z : The LED is unlit. 2: ****: the number of unprinted media. Up to 9999 (in [...]

APPENDIX 1 MESSAGES AND LEDS ENGLISH VERSION EO1-33089 APPENDIX 1 MESSAGES AND LEDS EA1- 2 LED Indicatio n Printer Status Restoration by RESTART key Acceptance of Status Request/ Reset Comm and No. LCD Message ONLINE ERROR Yes/No Yes/No 21 POWER FAILURE z  A pow er failure has occurred. No No 22 EEPROM ERROR z  Data cannot be read from/writte[...]

APPENDIX 1 MESSAGES AND LEDS ENGLISH VERSION EO1-33089 APPENDIX 1 MESSAGES AND LEDS EA1- 3 N OTES: • If a command error is found in the command received, up to 42 bytes of the erroneous command, starting from the command code, will be displayed. (However, [L F] and [NUL] will not be displayed.) Example 1 [ESC]PC001;0 A 00,0300,2,2,A,00,B[LF][NUL][...]

APPENDIX 2 INTERFACE ENGLISH VERSION EO1-33089 APPENDIX 2 INTERFACE EA2- 1 APPENDIX 2 INTERFACE  USB interface (Standard) Physical Layer: Conforming to V2.0 Full speed Transfer type: Control transfer, Bulk transfer Transfer rate: Full speed (12M bps) Class: Printer class Number of ports: 1 Power source: Self power Connector: Type B Pin No. Signa[...]

APPENDIX 2 INTERFACE ENGLISH VERSION EO1-33089 APPENDIX 2 INTERFACE EA2- 2  Serial interface (Option: B-EX700-RS-QM-R) Type: RS-232C Communication m ode: Full duplex Transmission speed: 2400 bps, 4800 bps , 9600 bps, 19200 bps, 38400 bps, 115200 bps Synchronization: Start-stop synchronization Start bit: 1 bit Stop bit 1 bit, 2 bit Data length: 7[...]

APPENDIX 2 INTERFACE ENGLISH VERSION EO1-33089 APPENDIX 2 INTERFACE EA2- 3 Connector: Signal PIN No. SPP Mode Nibble Mode ECP Mode 1 nStrobe HostClk HostClk 2 Data 1 Data 1 Data 1 3 Data 2 Data 2 Data 2 4 Data 3 Data 3 Data 3 5 Data 4 Data 4 Data 4 6 Data 5 Data 5 Data 5 7 Data 6 Data 6 Data 6 8 Data 7 Data 7 Data 7 9 Data 8 Data 8 Data 8 10 nAck P[...]

APPENDIX 2 INTERFACE ENGLISH VERSION EO1-33089 APPENDIX 2 INTERFACE EA2- 4  Wireless LAN (Option: B-EX700-WLAN-QM-R) Standard: Conforming to IEEE802.11b, and IEEE802.11g Client protocol: TCP/IP, Socket, LPD (LLPR), DHCP/WINS, HTTPD (SNMP) Print protocol: Socket communication/LPR Security protocol: WEP (64 bits/128 bits) or AES, TKIP (only when u[...]

APPENDIX 2 INTERFACE ENGLISH VERSION EO1-33089 APPENDIX 2 INTERFACE EA2- 5  Expansion I/O Interface (Option: B-EX700-IO-QM-R) Input Signal IN0 to IN5 Output Signal OUT0 to OUT6 Connector FCN-781P024-G/P or equivalent (External Device Side) Connector FCN-685J0024 or equivalent (Printer Side) Input Circuit Output Circuit Operating environment Temp[...]

APPENDIX 2 INTERFACE ENGLISH VERSION EO1-33089 APPENDIX 2 INTERFACE EA2- 6  RFID (Option) • B-EX700-RFID-U2-US-R Module: TOSHIBATEC TEC TRW-USM-01 Frequency: US settings: 902.75-927.25MHz (UHF US) AU settings: 918.25-925.75MHz (UHF Australia) TW settings: 922.25-927.25MHz (UHF Taiwan) KR settings: 910.4-913.6MHz (UHF Korea) Output: 10 to 100 m[...]

APPENDIX 3 PRINT SAMPLES ENGLISH VERSION EO1-33089 APPENDIX 3 PRINT SAMPLES EA3- 1 APPENDIX 3 PRINT SAMPLES  Font[...]

APPENDIX 3 PRINT SAMPLES ENGLISH VERSION EO1-33089 APPENDIX 3 PRINT SAMPLES EA3- 2 APPENDIX 3 PRINT SAMPLES (Cont.)  Bar codes JAN8, EAN8 MSI Interleaved 2 of 5 CODE39 (Standard) NW7 JAN13, EAN13 UPC-E EAN13+2 digits EAN13+5 digits CODE128 CODE39 (Full ASCII) CODE93 UPC-E+2 digits UPC-E+5 digits EAN8+2 digits EAN8+5 digits UPC-A UPC-A+2 digits[...]

APPENDIX 3 PRINT SAMPLES ENGLISH VERSION EO1-33089 APPENDIX 3 PRINT SAMPLES EA3- 3 UPC-A+5 digits UCC/EAN128 Industrial 2 of 5 POSTNET Customer bar code Customer bar code of high priority KIX Code RM4SCC Data Matrix MicroQR QR code Micro PDF417 MaxiCode CP Code PDF417[...]

APPENDIX 3 PRINT SAMPLES ENGLISH VERSION EO1-33089 APPENDIX 3 PRINT SAMPLES EA3- 4 ● GS1 DataBar family (with no compound composite printed) GS1 DataBar (Truncated) GS1 DataBar Stacked GS1 DataBar Stacked Omnidirectional GS1 DataBar Limited GS1 DataBar Expanded GS1 DataBar Expanded Stacked UPC-A UPC-E EAN-13 EAN-8 UCC/EAN-28 with CC-A, CC-B, or C[...]

APPENDIX 3 PRINT SAMPLES ENGLISH VERSION EO1-33089 APPENDIX 3 PRINT SAMPLES EA3- 5 ● GS1 DataBar family (with compound composite printed) GS1 DataBar (Truncated) GS1 DataBar Stacked GS1 DataBar Stacked Omnidirectional GS1 DataBar Limited GS1 DataBar Expanded Stacked GS1 DataBar Expanded UPC-A UPC-E EAN-8 EAN-13 UCC/EAN-128 with CC-A or CC-B UCC/E[...]

APPENDIX 4 GLOSSARIES ENGLISH VERSION EO1-33089 APPENDIX 4 GLOSSARIES EA4- 1 APPENDIX 4 GLOSSARIES Bar code A code which represents alphanumeric characters by using a series of black and white stripes in different widths. Bar codes are used in various industrial fields: Manufacturing, Hospitals, Libraries, Retail, Transportation, Warehousing, etc. [...]

APPENDIX 4 GLOSSARIES ENGLISH VERSION EO1-33089 APPENDIX 4 GLOSSARIES EA4- 2 Printer IP address A 32-bit address of a printer connected to TCP/IP network, which identifies the network printer. An IP address is written as 4 sets of numbers, separated by periods. Print head element The thermal print head consists of a single line of tiny resistive el[...]

M EO1-33089[...]