Toshiba PSAGVX Bedienungsanleitung

Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual Toshiba Personal Computer Satellite A300 Satellite Pro A300 EQUIUM A300 SATEGO A300 (PSAG8x/PSAG9x/PSAGAx) (PSAGBx/ PSAGQx/PSAGRx) (PSAGCx/PSAGDx/PSAGEx) (PSAGFx/ PSAGUx/PSAGVx) Maintenance Manual TOSHIBA CORPORATION S/ No[...]

ii Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual Copyright © 2008 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed with respect to the use of the inform ation contained he[...]

Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual iii Preface This maintenance manual describes how to perform hardware service maintenance for the Toshiba Personal Computer Satellite A 300D/Satellite Pro A300D/EQUIUM A300D / SATEGO A300D, referred to as Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 in this ma[...]

iv Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual The manual is divided into the following parts: Chapter 1 Hardware Overview describes the Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 system unit and each FRU. Chapter 2 Troubleshooting Procedures explains how to diagnose and resolve FRU problems. Chapter [...]

Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual v Conventions This manual uses the following formats to describe, identify, and highlight term s and operating procedures. Acronyms On the first appearance and whenever necessary for clarification acronyms are enclosed in parentheses following their definition. For example[...]

vi Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual Table of Contents Chapter 1 Hardware Overview 1.1 Features ................................................................................................................... .............1 1.2 System Unit Components .....................................................[...]

Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual vii Procedure 2 Connector Check and Replacement Check.................................... 2-15 2.7 Display ................................................................................................................. 2-1 6 Procedure 1 External Monitor Check ...........[...]

viii Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual 3.2.4 Hotkey Test ..............................................................................................8 3.2.5 Audio Play Test ........................................................................................8 3.2.6 Audio Record Test ..................[...]

Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual ix Safety Precautions ................................................................................................ 4-2 Before You Begin ................................................................................................ 4-4 Disassembly Procedures .........[...]

x Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual Removing the MDC Module ............................................................................. 4-28 Installing the MDC Module .............................................................................. 4-29 4.7 Top Cover ........................................[...]

Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual xi Removing the FL Inverter Board ....................................................................... 4-53 Installing the FL I nverter Board ........................................................................ 4-54 4.17 LCD Modules .................................[...]

xii Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual Appendices Appendix A Handling the LCD Module ........................................................................... A-1 Appendix B Board Layout .................................................................................................B-1 Appendix C Pin Ass[...]

Chapter 1 Hardware Overview i Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual[...]

1 Hardware Overview ii Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual[...]

1 Hardware Overview Satellite A300/Satellite Pro A300/EQUIUM A 300/SATEGO A300 Maintenance Manual iii Chapter 1 Contents 1.1 Features ................................................................................................................... ............ 1 1.2 System Unit Components ..........................................................[...]

1 Hardware Overview iv Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual Figures Figure 1-1 ID Parts Description Placement ............................................................................... 6 Figure 1-2 Computer Block Diagram ....................................................................................[...]

1 Hardware Overview 1.1 Features 1 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual 1.1 Features The Toshiba Satellite A300/Satellite Pro A300/ EQUIUM A300/SATEGO A300 is a full size notebook PC based on the Penryn / Pentium a nd Merom processor, providing high-speed processing capabilities and advanced features. The com[...]

1 Hardware Overview 1.1 Features 2 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual y 4096 MB (512Mx64)/667/800 MHZ  Hard Disk Drive (HDD) The computer accomm odates 9.5 mm and 12.5m m height HDD with following storage capacities: y 120 GB (9.5 mm thick) SATA (5,400rpm ) y 160 GB (9.5 mm thick) SATA (5,400rpm ) y 200 [...]

1.1 Features 1 Hardware Overview Satellite A300/Satellite Pro A300/EQUIUM A 300/SATEGO A300 Maintenance Manual 3 The computer has a removable 3/6/9 Cell Lithium Ion battery pack .  Universal Serial Bus (USB) Ports The computer has four USB 2.0 ports. It is supported to daisy-chain a maxim um of 127 USB devices. The serial data transfer rate is 4[...]

1 Hardware Overview 1.1 Features 4 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual The internal Mini Card slot supports IEEE802.11bg (ROW) / IEEE802.11ag (MOW)/ IEEE802.11ag (ROW)/ IEEE802.11ag (JPN)/ IEEE802.11agn (MOW)/ IEEE802.11agn (ROW) card. The Antenna has two or three wires dual band antenna support for BTO. [...]

1.1 Features 1 Hardware Overview Satellite A300/Satellite Pro A300/EQUIUM A 300/SATEGO A300 Maintenance Manual 5 The felica card reader writes and reads data to and from contactless Felica IC cards. Having no need for physical contact with the card, the reader/writer is immune to performance deterioration caused by wear and contamination, providing[...]

1 Hardware Overview 1.1 Features  Figures 1-1/1-2/1-3 and 1-4 show the com puter and its system unit configuration, respectively. Figure 1-1 ID Parts Description Placement 6 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual[...]

1.1 Features 1 Hardware Overview Figure 1-2 Computer Block Diagram Satellite A300/Satellite Pro A300/EQUIUM A 300/SATEGO A300 Maintenance Manual 7[...]

1 Hardware Overview 1.1 Features DC-IN Kensi- ngton Battery Speaker RGB USB*2 Rj45 Rj11 S-Video 1394 USB* 1 Micropho ne Headphon e Volume Speaker ODD H D D ( 2 nd ) E xp re ss 1 * W Lan sw it c h - CIR HDM I US B 1 * Bri d g e Me d i a Sl o t H D D ( Pr i m a r y ) Figure 1-3 System Board Configurations 8 Satellite A300/Satellite Pro A300/EQUIUM A3[...]

1.2 System Unit Components 1 Hardware Overview 1.2 System Unit Components Figure 1-4 is Block Diagram of the System Unit. Figure 1-4 System Unit Block Diagram Satellite A300/Satellite Pro A300/EQUIUM A 300/SATEGO A300 Maintenance Manual 9[...]

1 Hardware Overview 1.2 System Unit Components 10 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual The system unit of the computer consists of the following com ponents:  Processor: Core2 Duo / Dual Core Processor and Merom Celeron Processor. y Core2 Duo Processor (1066MHz) − Core speed: 2.26/2.40/2.53/2.80GHz − S[...]

1.2 System Unit Components 1 Hardware Overview Satellite A300/Satellite Pro A300/EQUIUM A 300/SATEGO A300 Maintenance Manual 11 − System Memory Support − PCI Express* Graphics (PEG) Interface − Integrated Display Interface Support − Internal Graphics Features − Direct Media Interface (DMI) − Power Management − Security and Manageabili[...]

1 Hardware Overview 1.2 System Unit Components 12 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual y 2 stereo ADCs support 16/20-bit PCM format for two stereo independent sound inputs. y 16/20/24-bit S/PDIF-OUT supports 44.1K/48K/88.2K/96K/192KHz sample rate. y All ADCs support 44.1K/48K/96KHZ sample rate. y 4 GPIOs(GPIO[...]

1.2 System Unit Components 1 Hardware Overview Satellite A300/Satellite Pro A300/EQUIUM A 300/SATEGO A300 Maintenance Manual 13 Built-in MDC card with Askey / Foxconn. Functions of modem controller: y Digital signal conductor protection y Ring wake-up support y Azalia interface y Communication codes supported: − For data communication: V.90 (Chin[...]

1 Hardware Overview 1.3 2.5-inch HDD 1.3 2.5-inch HDD The computer contains an extremely low-pr ofile and lightweight, high-perform ance HDD. The HDD incorporates 9.5 mm and 12.5 m m height magnetic disk and mini-W inchester type magnetic heads. The HDD interface conforms to Serial ATA. Storage capacities supported are 120, 160, 200, 250, 300, 320,[...]

1 Hardware Overview 1.4 DVD Super Multi (+-R Double Layer) 1.4 DVD Super Multi (+-R Double Layer) The DVD Super Multi drive accepts 12-cm (4.72-inch) and 8-cm (3.15-inch) discs. At maximum , the drive can play back a DVD at 8x speed, read CD-ROM at 24x speed, and write CD-R at 24x speed, CD-RW at 4x speed, US CD-RW at 16x speed, High Speed CD- RW a[...]

1 Hardware Overview 1.5 Power Supply 16 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual 1.5 Power Supply The power supply unit provides many different voltages for the system board and perform s the following functions: 1. Power input monitor y Checks whether the DC power supply (AC adapter) is connected to the computer[...]

5B1.6 Batteries 1 Hardware Overview Satellite A300/Satellite Pro A300/EQUIUM A 300/SATEGO A300 Maintenance Manual 17 1.6 Batteries The computer has the following three types of batteries:  Main Battery Pack  Real Time Clock (RTC) Battery Table 1-3 lists the specifications of these batteries. Table 1-3 Battery specifications Battery Ty pe Mate[...]

1 Hardware Overview 1.6 Batteries 18 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual Table 1-4 Quick/Normal charging time State Charge Time Off-State Charge 3/6/9 Cell About 4 hours max On-State Charge 3/6/9 Cell About 4~10 hours max NOTE: The time required for normal charge depends on the power consumption by the syste[...]

2 Troubleshooting 2-i Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual 2 概要 Chapter 2 Troubleshooting[...]

2 Troubleshooting 2-ii Satellite A300/Satellite Pro A300 /EQUIUM A300/SATEGO A300 Maintenance Manual Chapter 2 Contents 2.1 Outline .................................................................................................................... 2-1 2.2 Basic Flowchart .............................................................................[...]

2 Troubleshooting Satellite A300/Satellite Pro A300 /EQUIUM A300/SATEGO A300 Maintenance Manual 2-iii Procedure 2Connector Check ........................................................................ 2-21 2.11 Audio Test ............................................................................................................ 2-22 Procedure 1 T[...]

2 Troubleshooting 2-iv Satellite A300/Satellite Pro A300 /EQUIUM A300 /SATEGO A300 Maintenance Manual Figures Figure 2-1 Basic flowchart .............................................................................................. 2-3 Tables Table 2-1 HDD error code and status .......................................................................[...]

2.1 Outline 2 Troubleshooting Satellite A300/Satellite Pro A300 /EQUIUM A300/SATEGO A300 Maintenance Manual 2-1 2.1 Outline This chapter describes the fault diagnosis proced ures for field replaceable units (FRUs) in the computer. The FRUs covered here are as follows: 1. System board 2. HDD 3. Keyboard 4. Display 5. ODD drive 6. LAN 7. Finger Print[...]

2 Troubleshooting 2.2 Basic Flowchart 2-2 Satellite A300/Satellite Pro A300 /EQUIUM A300/SATEGO A300 Maintenance Manual 2.2 Basic Flowchart The basic flowchart in Figure 2-1 serves as a guide for identifying a possibly faulty FRU. Before going through the diagnostic flow chart steps, verify the following:  Ask the user if a password has been reg[...]

2.2 Basic Flowchart 2 Troubleshooting Satellite A300/Satellite Pro A300 /EQUIUM A300/SATEGO A300 Maintenance Manual 2-3 Star t Connect the AC Adapter DC IN LED on ?? BATTERY LED on ?? Turn the power on. Any error message displayed ?? Message "In Touch with Tomorrow Toshiba" displayed Follow the power supply diagnostic p rocedure in Sectio[...]

2 Troubleshooting 2.2 Basic Flowchart 2-4 Satellite A300/Satellite Pro A300 /EQUIUM A300/SATEGO A300 Maintenance Manual Figure 2-1 Basic flowchart (2/2) Keyboard works well ?? Follow the keyboard diagnostic procedure in Section 2.6 1 N o Insert Bootable CD into ODD Diagnostic Program Loaded ?? Perform each test with the diagnostic program. Any erro[...]

2.2 Basic Flowchart 2 Troubleshooting Satellite A300/Satellite Pro A300 /EQUIUM A300/SATEGO A300 Maintenance Manual 2-5 If the diagnostic program cannot detect an er ror, the error may be interm ittent. Run the continuous test program repeatedly to isolate th e problem. Check the log utilities function to confirm which diagnostic test detected th e[...]

2 Troubleshooting 2.3 Power Supply 2-6 Satellite A300/Satellite Pro A300 /EQUIUM A300/SATEGO A300 Maintenance Manual 2.3 Power Supply The power supply in the computer controls ma ny functions and com ponents. To check if the power supply is defective or malfunctioning, foll ow the troubleshooting procedures below as instructed. Procedure 1 Power Ic[...]

2.3 Power Supply 2 Troubleshooting Satellite A300/Satellite Pro A300 /EQUIUM A300/SATEGO A300 Maintenance Manual 2-7  DC IN LED DC IN LED Power supply status On in White DC power being supplie d (from the AC adapter) Off Battery damage and can’t charg e duri ng DC-in. Off Else If the DC IN LED off, follow the steps below: 1. Remove the battery[...]

2 Troubleshooting 2.3 Power Supply Procedure 2 Connection Check Power is supplied to the system board as illustrated below: AC adaptor System board AC power cord AC adaptor cord Battery pack Follow the steps below to check whether each connector has been connected correctly: Check 1 Make sure the AC adaptor and AC power cord have been firmly plugg [...]

2.4 System Board 2 Troubleshooting Satellite A300/Satellite Pro A300 /EQUIUM A300/SATEGO A300 Maintenance Manual 2-9 2.4 System Board To check if the system board is defectiv e or malfunctioning, f ollow the troubleshooting procedures below as instructed. Procedure 1 Message Check Procedure 2 Test Program Check Procedure 3 Replacement Check Procedu[...]

2 Troubleshooting 2.4 System Board 2-10 Satellite A300/Satellite Pro A300 /EQUIUM A300/SATEGO A300 Maintenance Manual Procedure 2 Test Program Check The maintenance test program contains seve ral program s for diagnosing the system board and CPU. Execute the following test programs using the procedures described in Chapter 3. 1. System test 2. Memo[...]

2.5 2.5-inch HDD 2 Troubleshooting Satellite A300/Satellite Pro A300 /EQUIUM A300/SATEGO A300 Maintenance Manual 2-11 2.5 HDD To check if the 9.5mm or 12.5mm HDD is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Message Check Procedure 2 Partition Check Procedure 3 Format Check Procedure 4 Test P[...]

2 Troubleshooting 2.5 2.5-inch HDD 2-12 Satellite A300/Satellite Pro A300 /EQUIUM A300/SATEGO A300 Maintenance Manual create a DOS partition on drive C. Then restart the computer.. If the problem persists, go to Procedure 3. Check 3 If drive C is listed as active in the FDISK menu, perform Check 4. If drive C is not listed as active, return to the [...]

2.5 2.5-inch HDD 2 Troubleshooting Procedure 4 Test Program Check Run the HDD test program stored on the maintena nce test program disk for all test items. See Chapter 3 for details on how to use the test program. If an error is detected during the HDD test, an error code and status will be displayed. The error codes and their status names are list[...]

2 Troubleshooting 2.5 2.5-inch HDD Procedure 5 Connector Check an d Replacement Check The HDD or system board may be faulty. Di sassemble the computer following the steps described in Chapter 4 and perform the following checks: Check 1 Make sure the following connect ors have been firmly connected to the HDD, system board and CPU. HDD System board [...]

2.6 Keyboard 2 Troubleshooting 2.6 Keyboard To check if the computer’s keyboard is defective or malf unctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Test Program Check Procedure 2 Connector Ch eck and Replacement Check Procedure 1 Test Program Check Execute the Keyboard test availa ble as part of the maintenan c[...]

2 Troubleshooting 2.7 Display 2.7 Display To check if the computer’s display is def ective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 External Monitor Check Procedure 2 Test Program Check Procedure 3 Connector Ch eck and Replacement Check Procedure 1 External Monitor Check Connect an external monitor[...]

2.7 Display 2 Troubleshooting Check 3 The FL may be fault y. Replace it w ith a new one and return to Procedure 3. If there is still an error, perform Check 4. Check 4 The FL inverter board may be fa ulty. Replace it with a new one and return to Procedure 3. If there is still an error, perform Check 5. Check 5 Make sure the LCD/FL cable has been fi[...]

2 Troubleshooting 2.8 ODD Drive 2.8 ODD (Optical Disk Drive) To check if the internal ODD drive is defec tive or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 ODD Cleaning Check Procedure 2 Test Program Check Procedure 3 Connector Check and Replacement Check Procedure 1 ODD Cleaning Check 1. Turn off the pow[...]

2.8 ODD Drive 2 Troubleshooting Satellite A300/Satellite Pro A300 /EQUIUM A300/SATEGO A300 Maintenance Manual 2-19 Check 3 The ODD drive may be faulty. Replace the ODD drive with a new one following the steps in Chapter 4. If the ODD drive is still not functio n ing properly, perform Check 4. Check 4 The system board m ay be faulty. Replace it w it[...]

2 Troubleshooting 2.9 LAN 2-20 Satellite A300/Satellite Pro A300 /EQUIUM A300/SATEGO A300 Maintenance Manual 2.9 LAN To check if the computer’s LAN is defec tive or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Test Program Check Procedure 2 Connector Ch eck and Replacement Check Procedure 1 Test Program C[...]

Finger Print(Optional) 2.10 Finger Print(Optional) 2 Troubleshooting Satellite A300/Satellite Pro A300 /EQUIUM A300/SATEGO A300 Maintenance Manual 2-21 2.10 Finger Print(Optional) To check if the computer’s Finger Print is defective or m alfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Test Program Check Proce[...]

2 Troubleshooting 2.10 Audio Test 2.11 Audio Te st To check if the computer’s Speaker is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Test Program Check Procedure 2 Connector Ch eck and Replacement Check Procedure 1 Test Program Check Execute the Audio test available as part of th e maintenan[...]

2.12 IEEE 1394 Test 2 Troubleshooting Satellite A300/Satellite Pro A300 /EQUIUM A300/SATEGO A300 Maintenance Manual 2-23 2.12 IEEE 1394 Test To check if the computer’s IEEE 1394 is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Test Program Check Procedure 2 Connector Check Procedure 1 Test Pro[...]

2 Troubleshooting 2.13Cooling Module 2.13 Cooling Module To check if the computer’s cooling module is defective or malfunctioning, f ollow the troubleshooting procedures below as instructed. Procedure 1 Test Program Check Procedure 2 Connector Check and Replacement Check Procedure 1 Test Program Check Execute the Fan On/off test program available[...]

2.13 Cooling Module 2 Troubleshooting Satellite A300/Satellite Pro A300 /EQUIUM A300/SATEGO A300 Maintenance Manual 2-25[...]

Chapter 3 Diagnostic Programs[...]

3 Diagnostic Programs ii Satellite A300,Satellite Pro A300, EQUIUM A300,SATEGO A300 Main tenance Manual Chapter 3 Contents 3.1 General .......................................................................................................................... 1 3.2 Quick Start ..........................................................................[...]

3 Diagnostic Programs Satellite A300,Satellite Pro A300, EQUIUM A300,SATEGO A300 Main tenance Manual iii 3.8 Video ........................................................................................................................... 45 3.9 Communication (COMM) ...................................................................................[...]

[...]

3.1 General 3 Diagnostic Programs Satellite A300,Satellite Pro A300, EQUIUM A300,SATEGO A300 Main tenance Manual 1 3.1 General This chapter explains the dia gnostic programs which tests and di agnoses the functions of the hardware components of this computer. The di agnostic programs can be classified into two types: OPTION and DIAGNOSTIC TEST. NOT[...]

3 Diagnostic Programs 3.1 General 2 Satellite A300,Satellite Pro A300 , EQUIUM A300,SATEGO A300 Main tenance Manual Before running the diagnostic programs, get the following tools prepared:  A Service Diagnostic BOOT CD  A Formatted FLOPPY DISK  A Test Media CD (A-BEX TEST CD-R OM TCDR-702)(for CD-ROM test)  A Test Media DVD (Toshiba-EM[...]

3.2 Quick Start 3 Diagnostic Programs 3.2 Quick Start When the system is booting from Service Diagnos tic CD, the following screen will be displayed: Please select a test item or select 0 to exit to Free -DOS: 3.2.1 Quick Test When this item is selected, the syste m will run the configured test item s and genera te a test report automatically. When[...]

3 Diagnostic Programs 3.2 Quick Start Select ‘Test Mouse’ or press F8 to run the test. The prompt inform ation would be displayed in the screen as below. This test item needs user to verify whether th e mouse works normally. The test result will be displayed in the f ollowing screen: 4 Satellite A300,Satellite Pro A300 , EQUIUM A300,SATEGO A300[...]

3.2 Quick Start 3 Diagnostic Programs Here is another method to run the test: Highl ight a test item by us ing arrow keys, then, press Enter to start. If there are parameters pr ovided, user should set para meters in the parameter dialog window. CPU Speed Test (Step by Step): 1. Select test item: Select System — CPU — CPU Speed , then, press th[...]

3 Diagnostic Programs 3.2 Quick Start 3. Test Result System will automatically run and display the tes t result as follows: Following is the comparison report of the two testing methods m entioned above: 1) Configuration and Running As to the method used in Mouse test, the user is required to select test items by pressing Space key and set the para[...]

3.2 Quick Start 3 Diagnostic Programs As to the method adopted in CPU Speed test , user should highlight the test item and press Enter to start testing. And the user has to setup the parameters every time before running the test. Using this method, only one test item would be tested at one time. 3.2.3 Keyboard Layout test The test purpose is to che[...]

3 Diagnostic Programs 3.2 Quick Start It requires user to press the key and ch eck whether the key in the screen changes color or not. User can terminate test by typing ‘ END ’. When testing the ‘ Fn ’ key, it must press the ‘ Enter ’ key at the same time. When the user has checked all the keys and all the keys in the screen have change[...]

3.2 Quick Start 3 Diagnostic Programs 3.2.6 Audio Record Test Check whether the system could record the sound normally. If there is no error during the whole test, Pass; otherwise Fail. The test wi ll repeat for four tim es. When the test is completed, a file named autest.log wi ll be saved in the defined location. 3.2.7 DMI Read Read the informati[...]

3 Diagnostic Programs 3.2 Quick Start In this screen, there are two lines which attribute could be edited and updated. The 1 st line (the font in yellow with blue background) shows the attribute’s value that is read from the current system and the 2 nd line (the font in red with turquoise background) shows the same value as that in the 1 st line [...]

3.2 Quick Start 3 Diagnostic Programs The attributes that have been modified woul d be marked in red; otherwise in yellow. User could press F2 to save the changes, or press F4 to ignore and exit the current program. 3.2.9 System Information This function is used to read the system in formation. When the test is completed, a file named System.log wi[...]

3 Diagnostic Programs 3.2 Quick Start User can use function keys listed on the bottom of the screen to display the configuration of the component or exit the current pr ogram. On the left column, the components information is listed and us er can use arrow keys or PgUp/PgDn to view the list and highlight the chosen component. On the right column, t[...]

3.2 Quick Start 3 Diagnostic Programs 3.2.11 Exit to Free DOS Select this item to exit to Free DOS. 3.2.12 The Diagn ostics Screen Explanation Below is an example of running a test item. It includes the following parts: Diagnostics Windows, Test Status Area, Progress Bar, Erro r L ist, Test Item’s Title, Status Bar and Message Box. 1. Diagnostics[...]

3 Diagnostic Programs 3.2 Quick Start  The error list of each test m odule is displayed at the lower right corner of the screen. It would display the total error quantity found in the test, the most recent five error co des and description would be shown here. Deta iled error report coul d be viewed with Logview.exe.  W hen pressing ESC key d[...]

3.2 Quick Start 3 Diagnostic Programs Satellite A300,Satellite Pro A300, EQUIUM A300,SATEGO A300 Main tenance Manual 15  Script File Name : Script file nam e, e.g. ‘ Custom .INI’ in the above screen;  Current Time(C. TIME) : Current system time, e.g. ‘C.TIME:2008-0 2 -16 00 :42:40’ in the above screen;  Test Time Remaining (LEFT) :[...]

3 Diagnostic Programs 3.3Option 3.3 Options 3.3.1 Overview In Service Diagnostics, with the Options menu user can configure the batch parameters, test item’s param eters and t hose parameters created by the LOG file. Options Menu Notes: • Select All/None Items Switch between selecting a ll test items and selecting none. T he hot key is F6 . •[...]

3.3 Option 3 Diagnostic Programs Satellite A300,Satellite Pro A300, EQUIUM A300,SATEGO A300 Main tenance Manual 17 Configure batch parameters and a ll the test item’s param eters . • Load Batch Parameters Upload all the test items and the param eters to the *.ini file. • Save Batch Parameters Save all the parameters and the test item s that a[...]

3 Diagnostic Programs 3.3Option • Test Order Specify the order of the test items. C hoose 'Sequence' to adopt the sequential mode; choose 'Random' to run the test items in random sequence. • Test Options Choose one of the following options: 9 Wait On Error Wait for further confirmation while an error occurs. 9 Break On Error[...]

3.3 Option 3 Diagnostic Programs Monitor the remaining ba ttery capacity (percent). 9 Monitor CPU Thermal Monitor the CPU temperature. • Test Mode 9 LOOPBOUND The chosen test items will run repeated ly accord ing to the times specified in the 'Number of Loops'. 9 TIMEBOUND The chosen test items will run for an exte nt tim e specified in[...]

3 Diagnostic Programs 3.3Option Repeat times of the test item. • Interactive If the item is enabled during the test, the te s t items that need user to response can run normally, such as PS2 Mouse te st; If it is disabled, those test item s will report FAIL. Whether the option here is enabled, it only affects the current test item. • Parameters[...]

3.3 Option 3 Diagnostic Programs In this window, you can specify the .INI files that you wanted to be edited or modified. 3.3.5 Save Batch Parameters Here you can save the edited or modified content to the batch parameters files. Satellite A300,Satellite Pro A300, EQUIUM A300,SATEGO A300 Main tenance Manual 21[...]

3 Diagnostic Programs 3.3Option 3.3.6 LOG Parameters Setting You can access the Log Parameters screen through Service DiagnosticsOptions - Generate Report. • Report Destination If selecting 'NONE', no log file will be generated ; if selecting 'FILE' , a log file with the name specified in 'Log File Name' will be gen[...]

3.3 Option 3 Diagnostic Programs If selecting this parameter, erro rs and time will be recorded only when the test fails. 9 Append to Old Log File If selecting this parameter, the new lo g will be added to the old one. 9 Log Device Info on Fail If selecting this parameter, deta ils of the failed test will be recorded. • Log file Name Specify the [...]

3 Diagnostic Programs 3.3Option In this screen, you can specify a Log file and view it with the viewer designated in Specify LOG Viewer. 3.3.9 LOG Viewer Service Diagnostic Log viewer: • ↑ , ↓ Scroll a line backward or forward on the screen. • Page Up, Page Down 24 Satellite A300,Satellite Pro A 300, EQUIUM A300,SATEGO A300 Main tenance Man[...]

3.3 Option 3 Diagnostic Programs Satellite A300,Satellite Pro A300, EQUIUM A300,SATEGO A300 Main tenance Manual 25 Scroll a page backward or forward on the screen. • Esc Exit the Log viewer. • F1 Display the Help information about the Log viewer operations and the functional keys. • Ctrl+Home Go to the start of the log file. • Ctrl+End Go t[...]

3 Diagnostic Programs 3.3Option 26 Satellite A300,Satellite Pro A 300, EQUIUM A300,SATEGO A300 Main tenance Manual Base Memory Test : PASS Extended Memory Test : PASS End Time: Wed Jul 05 10:47:51 2006 <Module Name>: Service Diagnostic Ver 1.00 ... Mouse Test Build Date 2006.01.10 [MSTPad] Begin Time: Wed Jul 05 10:48:54 2006 Touch Pad Test :[...]

3.4 Subtests 3 Diagnostic Programs Satellite A300,Satellite Pro A300, EQUIUM A300,SATEGO A300 Main tenance Manual 27 3.4 Subtests Test Group Sub Item ID Subtest Test ID Test items Internal Name System 01 CPU 01 Basic Functionality Test [C PUBasicFun ] 02 CPU Speed [CPUSpeed] 03 Coprocessor NPU Basic Functions NPU Interrupt Coprocessor [NPUFun ] [NP[...]

3 Diagnostic Programs 3.4 Subtests 28 Satellite A300,Satellite Pro A 300, EQUIUM A300,SATEGO A300 Main tenance Manual 02 Random Increment Read/Write [RandIncr] 11 Data Bus Test [DataBus] 12 Memory Speed Test [MemSpeed] Storage 01 HDD 01 Sequential/Random R/W [SeqRdRW1] 02 Sequential/Random Seek [Seek1] 03 Performance [Perform1] 04 Controller Check [...]

3.4 Subtests 3 Diagnostic Programs Satellite A300,Satellite Pro A300, EQUIUM A300,SATEGO A300 Main tenance Manual 29 VESA 1024x768x32 K Mode VESA 1024 x 768 x 16 K Mode VESA 1024 x 768 x32bit Mode [V1024768_32] 04 1 280 X 800 Video Modes VESA 1 280 x 800 x256 Mode VESA 1 280 x 800 x64K Mode VESA 1 280 x 800 x32 K Mode VESA 1 280 x 800 x 16 K Mode V[...]

3 Diagnostic Programs 3.5 System Test 3.5 System Test Move arrow keys and press the Space key to select CPU test item from Service Diagnostic menu, then highlight CPU and press the Enter to run this test item. Subtest 01 CPU 1. Basic Functionality Test This test item is to check whether the CPU works normally through math and logic calculation, whi[...]

3.5 System Test 3 Diagnostic Programs CPU Speed Comparison --Whether you want to make a comparison of the CPU speed with the value set in ‘E xpected CPU Speed’, you should choose ‘Yes’; otherwise, ‘No’. Expected CPU Speed --Specify the expected CPU Speed value you want for further comparison. Allowable Error Rate -- Specify the Allowabl[...]

3 Diagnostic Programs 3.5 System Test 5. CPU Protected Mode Test This test item is to check whether CPU protected m ode instruction works normally. 6. MMX The test item is to confirm whether the CPU supports MMX instru ctions. Subtest 02 Boards 1. DMA Controller This test item is to check whethe r the DMA controller works norm ally. 2. Interval Tim[...]

3.5 System Test 3 Diagnostic Programs This test item is to check: 1. Whether the current system supports Plug-n-Play; 2. Whether there is an ESCD (Extended System Configuration D ata) in the BIOS; 3. Whether there is PCI-to-ISA bridge in the system; 4. Whether there is PCI bus in the sy stem. 6. ACPI Test ACPI test includes two sub-items as below: [...]

3 Diagnostic Programs 3.5 System Test 34 Satellite A300,Satellite Pro A 300, EQUIUM A300,SATEGO A300 Main tenance Manual[...]

3.6 Memory Test 3 Diagnostic Programs Memory Test This test module is to check whet her the m em ory chip works normally. Subtest 01 BIOS ROM This test item is to check the validity of BIOS ROM that in cludes two sub-items -- ROM Read and ROM Write Protection. RO M Read is to check whether BIOS ROM could be correctly read out, ROM Wr ite Protect is[...]

3 Diagnostic Programs 3.6 Memory Test Pattern Size: Choose the pattern size – BY TE, WORD, DWORD or ALL. Percent (%): Choose the percentage of the defined range of the m emory to be tested. Time Limit(h): Choose or Input the time (hour) of the defined range of the memory to be tested. Time Limit(m): Choose or Input the time (minut e) of the defin[...]

3.6 Memory Test 3 Diagnostic Programs Satellite A300,Satellite Pro A300, EQUIUM A300,SATEGO A300 Main tenance Manual 37 test coverage would be based on the setting and the value in ‘Percent (%) mentioned at below. Pattern Size: Choose the pattern size – BY TE, WORD, DWORD or ALL. Percent (%): Choose the percentage of the defined range of the m [...]

3 Diagnostic Programs 3.6 Memory Test In addition to the above pattern test of th e memory, there is Read/Write Cycle test and Read Cycle Test for the extended memory. Below is the parameter dialog window of the extended pattern test. Test Range: Specify the test coverage range of Extended Memory. If user chooses Total Size, it means that the whole[...]

3.6 Memory Test 3 Diagnostic Programs Test by using read instructions. Subtest 05 Walking 1’s Test The test item is to ensure that there is no short circuitry issue in mem ory chip. The parameter dialog window is the same as that in ‘Subtest 02 P attern’. Subtest 06 Walking 0’s Test The test item is to ensure that there is no open circuitry[...]

3 Diagnostic Programs 3.6 Memory Test 40 Satellite A300,Satellite Pro A 300, EQUIUM A300,SATEGO A300 Main tenance Manual This test item is to check whether the memory could be correctly accessed with randomized memory address an d a series of increm ental data. Subtest 11 Data Bus Test This test item is to check whether the data bus works normally.[...]

3.7 Storage 3 Diagnostic Programs 3.6 Storage Subtest 01 HDD This test item runs on IDE hard disks. It checks the functions and performance of IDE hard disk. In order to protect user’s HDD data, the password must be verified before the HDD test. The screen is as follows: Password ： hard disk 1. Sequential/Random R/W This test item is to check t[...]

3 Diagnostic Programs 3.7 Storage LBA Start, LBA End --Specify the start and end byte in LBA (Large Block Address). Percent —Specify the coverage rate in percentage of the total disk. Time Limit(h): Choose or Input the time (hour) of the defined range of the total disk to be tested. Time Limit(m): Choose or Input the time (minute) of the defined [...]

3.7 Storage 3 Diagnostic Programs Percent-- Specify the coverage rate in percentage of the total disk. Time Limit(h): Choose or Input the time (hour) of the defined range of the total disk to be tested; Time Limit(m): Choose or Input the time (minute) of the defined range of the total disk to be tested. 3. Performance Check the HDD’s seeking spee[...]

3 Diagnostic Programs 3.7 Storage 44 Satellite A300,Satellite Pro A 300, EQUIUM A300,SATEGO A300 Main tenance Manual Subtest 02 ODD The ODD test runs on ID E CDROM/DVD-ROM & CD-RW. It will check the ODD driver’s functionality and perf ormance. 1. Controller Test Check the CDROM controller’s status. 2. Data Transfer Rate Check the data trans[...]

3.10 Peripheral 3 Diagnostic Programs 3.7 Video This test item tests the video by: 1. displaying the figures in different graphic modes. 2. displaying the property and color of the characters in different text modes. User will confirm whether each video m ode works normally by judging whether the display is correct. It checks whether the video m em[...]

3 Diagnostic Programs 3.10 Peripheral It would display the below texts of th e different attributes in the screen: 1. Text in normal attribute; 2. Text in blinking normal attribute; 3. Text in inverse attribute; 4. Text in blinking inverse attribute; 5. Text in hi-intensity attribute; 6. Text in blinking hi-intensity attribute; Users need to check [...]

3.10 Peripheral 3 Diagnostic Programs 4. Text Color This test item is to check whether all 16 colors foreground and all 8 colors background works normally in VGA text mode. The bit4-6 of the attribute byte of a ch aracter defines 8 background colors (black, blue, green, cyan, red, brown, magenta, and light gray), and the bit0-3 defines 16 foregroun[...]

3 Diagnostic Programs 3.10 Peripheral This test item is to check whether 80*25 Text Mode works normally. In the test, user is required to respond according to the instru ction in the screen. Subtest 02 640 * 480 VGA Mode This test item is to check whethe r 680*480 VGA Text mode works normally. In the test, user is required to respond according to t[...]

3.10 Peripheral 3 Diagnostic Programs Subtest 03 VESA Video Modes This test item is to check whether all the video modes supported by the video card works normally. In the test, user is required to respon d following the instruction in the screen. 1. 640X480 Video Modes Test 2. 800X600 Video Modes Test 3. 1024X768 Video Modes Test 4. 12 80 X 800 Vi[...]

3 Diagnostic Programs 3.10 Peripheral If press Ctrl+Break to force the test to term inate during execution of VESA Video Memory, the test program will not operate and display properly in f urther tests. Subtest 05 AGP Test This test item is to report the system’s Accelerated Graphics Port status and check whether AGP registers works normally. Sub[...]

3.10 Peripheral 3 Diagnostic Programs Subtest 07 Register Test This test item is to check whether th e registers of the video adapter works normally. Subtest 08 Color Purity Test This test item is to check whether th e sy stem (the video adapter and the display) could display the purity color of re d, green, blue, black and white. In the test, user[...]

3 Diagnostic Programs 3.10 Peripheral Subtest 10 DAC/Palette Address This test item is to check the f unction of DAC registers and Palette registers. In the test, user is required to respond according to the instru ction in the screen. 52 Satellite A300,Satellite Pro A 300, EQUIUM A300,SATEGO A300 Main tenance Manual[...]

3.10 Peripheral 3 Diagnostic Programs Satellite A300,Satellite Pro A300, EQUIUM A300,SATEGO A300 Main tenance Manual 53[...]

3 Diagnostic Programs 3.10 Peripheral 54 Satellite A300,Satellite Pro A 300, EQUIUM A300,SATEGO A300 Main tenance Manual 3.8 Communication (COMM) Subtest 01 LAN Card This test item is to check whether the m odule can detect the exis tence of the network card and display its related information. 1. Device ID Detection Detect the device ID of the net[...]

3.10 Peripheral 3 Diagnostic Programs 3.9 Peripheral Subtest 01 Keyboard This test item is to check wh ether the keyboard works normally. 1. Keyboard Data Line Test Check whether the keyboard data line works normally. 2. Keyboard Clock Line Test Check whether the keyboard clock line works normally. Subtest 02 Mouse Test Check whether the point devi[...]

3 Diagnostic Programs 3.10 Peripheral Subtest 03 Led Test 1. Led Test Check whether the Device led works normally. 56 Satellite A300,Satellite Pro A 300, EQUIUM A300,SATEGO A300 Main tenance Manual[...]

3.11Error Codes and Description 3 Diagnostic Programs Satellite A300,Satellite Pro A300, EQUIUM A300,SATEGO A300 Main tenance Manual 57 3.10 Error Codes and description The format of ‘Error Code’ is ‘ddxxee ’, and ‘dd’ is the device ID (1 ~2 chars), ‘xx’ is test function ID of device (2 chars), ‘ee’ is th e error code of device [...]

3 Diagnostic Programs 3.11Error Codes and Description 58 Satellite A300,Satellite Pro A 300, EQUIUM A300,SATEGO A300 Main tenance Manual 04 (XMS)Memory Problem The test pattern read out from the extension memory is different from the one that has been written in this address. As above. 05 (XMS) Out Of Range Wrong parameters se tup. Check and reset [...]

3.11Error Codes and Description 3 Diagnostic Programs Satellite A300,Satellite Pro A300, EQUIUM A300,SATEGO A300 Main tenance Manual 59 configuration. 17 PCI to ISA Bridge Error PCI-ISA bridge errors. Repeat multiple times. If there is always the same error, replace the board. 18 ESCD Error ESCD errors. As above. 53 ACPI Table Test Error Errors wit[...]

3 Diagnostic Programs 3.11Error Codes and Description 60 Satellite A300,Satellite Pro A 300, EQUIUM A300,SATEGO A300 Main tenance Manual 15 VESA VRAM Test Error Physical problems with the video card or the monitor. Check whether there is any physical problem with the video card or the monitor. 16 AGP Test Error AGP configuration register errors. Ch[...]

3.11Error Codes and Description 3 Diagnostic Programs Satellite A300,Satellite Pro A300, EQUIUM A300,SATEGO A300 Main tenance Manual 61 01 Keyboard Map & Stroke Test Fail Key board Map & Stroke Test fails. Check the KBD connection and repeat the test. 03 Clock Line Test Fail Clock Line Test fails. As above. 04 Data Line Test Fail Data Line [...]

3 Diagnostic Programs 3.11Error Codes and Description 62 Satellite A300,Satellite Pro A 300, EQUIUM A300,SATEGO A300 Main tenance Manual 09 Eject Error Wrong CD-ROM drive. Exit from the wrong drive.[...]

3.12 Quick Test Item List 3 Diagnostic Programs Satellite A300,Satellite Pro A 300, EQUIUM A300,SATEGO A300 Mai ntenance Manual 61 3.11 Quick Test Item List Device Test Items Comment CPU Basic Functionality N PU Basic Functions CPU Information Memory BIOS ROM Cache Me mory Bit Stuck High Test 10% or 3 minutes Bit Stuck Low Test 10% or 3 minutes Add[...]

Chapter 4 Replacement Procedures 4 1[...]

4 Replacement Procedures 4-ii Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual[...]

4 Replacement Procedures Satellite A300/Satellite Pro A 300/EQUIUM A300/SATEGO A300 Maintenance Manual 4-iii Chapter 4 Contents 4.1 General .................................................................................................................... ... 4-1 Safety Precautions ..................................................................[...]

4 Replacement Procedures 4-iv Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual Installing the Keyboard Cover and Keyboard ................................................... 4-24 4.5 Wireless LAN Card.................................................................................................. 4-26 Removing the Wirel[...]

4 Replacement Procedures Satellite A300/Satellite Pro A 300/EQUIUM A300/SATEGO A300 Maintenance Manual 4-v Installing the USB board, Bluetooth Card, FM card and Felica card ................ 4-49 4.15 Display Mask ........................................................................................................... 4-5 0 Removing the Display Ma[...]

4 Replacement Procedures 4-vi Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual Figures Figure 4-1 Removing the battery pack ................................................................................. 4-8 Figure 4-2 Removing the battery pack ...........................................................................[...]

4 Replacement Procedures Satellite A300/Satellite Pro A 300/EQUIUM A300/SATEGO A300 Maintenance Manual 4-vii Figure 4-32 Installing the CPU ........................................................................................... 4-46 Figure 4-33 Securing the CPU ....................................................................................[...]

4.1 General 4 Replacement Procedures 4 1 4.1 General This chapter explains how to disassemble the computer and replace Field Replaceable Units (FRUs). Some replacement procedures m ay not require you to remove all the surrounding FRUs to replace only one FRU. The chart below shows the FRUs in the order in which they should be removed in a top-down [...]

4 Replacement Procedures 4.1 General 4-2 Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200 Maintenance Manual Safety Precautions Before you begin to disassembly read the following safety precautions carefully. Be sure to follow them while you are working. DANGER: 1. Always use the genuine batteries or replacement batteries authoriz[...]

4.1 General 4 Replacement Procedures Satellite A300/Satellite Pro A 300/EQUIUM A300/SATEGO A300 Maintenance Manual 4-3 CAUTION: 1. Before replacing a component, make su re that the replacement component meets the required specifications. To avoid computer failures, never use components that do not meet the specifications. 2. To avoid internal damag[...]

4 Replacement Procedures 4.1 General 4-4 Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200 Maintenance Manual Before You Begin Before you begin to disassembly the computer, keep in m ind the precautions and advice in this section. Always begin disassembly by removing the AC adapter and battery pack. Remove the optional parts and ac[...]

4.1 General 4 Replacement Procedures Satellite A300/Satellite Pro A 300/EQUIUM A300/SATEGO A300 Maintenance Manual 4-5 Disassembly Procedures The cable connectors come in these two basic types:  Pressure plate connectors  Normal pin connectors To remove a pressure plate connector, pull up the tabs on either side of the connector's plasti[...]

4 Replacement Procedures 4.1 General 4-6 Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200 Maintenance Manual Tools and Equipment For your safety and that of other people in the working environment, it is strongly recommended that you use electrostatic discharge (ESD) equipm ent. The proper use of this equipment will ensure success[...]

4.1 General 4 Replacement Procedures Satellite A300/Satellite Pro A 300/EQUIUM A300/SATEGO A300 Maintenance Manual 4-7 Colors of Screw Shanks For easy identification of the correct screws, the screw shanks are colored according to their lengths, as follows:  Screws of an even-numbered length Brown  Screws of an odd-numbered length W hite  [...]

4 Replacement Procedures 4.1 General Removing the Battery Pack Remove the battery pack according to the following procedures and Figure 4-1, 4-2. CAUTION: When handling the battery packs, use care not to short circuit the terminals. Do not drop, hit, twist, or bend the battery packs. Do not scratch or break up their casing. 1. Turn the computer ups[...]

4.1 General 4 Replacement Procedures Satellite A300/Satellite Pro A 300/EQUIUM A300/SATEGO A300 Maintenance Manual 4-9 Installing the Battery Pack Install the battery pack according to the following procedures and Figure 4-1, 4-2. CAUTION: The battery packs contain a lithium ion battery, which can explode due to improper replacement, use, handling,[...]

4 Replacement Procedures 4.1 General Removing the Optional PC Card Remove the optional PC card according to the following procedures and Figure 4-3, after checking that the computer is turned off in boot mode. CAUTION: Install or remove the PC card correctly, according the manuals for the PC card and the operating system you are using. 1. Push the [...]

4.1 General 4 Replacement Procedures Satellite A300/Satellite Pro A 300/EQUIUM A300/SATEGO A300 Maintenance Manual 4-11 Installing the Optional PC Card Install the optional PC card according to the following procedures and Figure 4-3, after checking that the computer is turned off in boot mode. 1. Insert the PC card gently until it stops and is sea[...]

4 Replacement Procedures 4.1 General Removing the Memory Card Remove the mem ory card according to the following procedures and Figure 4-4, after checking that the computer is turned off in boot mode. 1. Open the card cover. 2. Push the memory card to be rem oved until it stops then release the memory card. 3. When the mem ory card pops out, grasp [...]

4.1 General 4 Replacement Procedures Removing the Optional Memory Remove the optional mem ory (module) according to the following procedures and Figures 4- 5, after checking that the computer is turned off in boot mode. CAUTION: Remove the optional memory after turning off the computer. If this is violated, the computer or memory can be damaged. 1.[...]

4 Replacement Procedures 4.1 General 4-14 Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200 Maintenance Manual Installing the Optional Memory Install the optional memory (m odule) according to the following procedures and Figures 4-5, after checking that the computer is turned off in boot mode. CAUTION: Install the optional memory [...]

4.2 HDD 4 Replacement Procedures 4.2 HDD Removing the HDD (For Main HDD) CAUTION: Do not press on the top or bottom of the drive. Applying such pressure can either corrupt the data in the drive or damage the drive. Remove the HDD (hard disk drive) according to the following procedures and Figures 4-6, 4- 7, 4-8. 1. Release the one HDD cover screws [...]

4 Replacement Procedures 4.2 HDD 4. Remove the HDD pack by pulling on the tab attached to the pack, following the direction of the arrows. NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or replace the HDD pack only if it fails. 5. Place the HDD pack on a flat surface (such as a desk), and remove the four M3x3.5 black[...]

4.2 HDD 4 Replacement Procedures Removing the HDD (For Second HDD) CAUTION: Do not press on the top or bottom of the drive. Applying such pressure can either corrupt the data in the drive or damage the drive. Remove the HDD (hard disk drive) according to the following procedures and Figures 4-9, 4- 10, 4-11. 1 Second HDD cover Second HDD cover scre[...]

4 Replacement Procedures 4.2 HDD 4. Remove the HDD pack by pulling on the tab attached to the pack, following the direction of the arrows. NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or replace the HDD pack only if it fails. 5. Place the HDD pack on a flat surface (such as a desk), and remove the four M3x3.5 black[...]

4.2 HDD 4 Replacement Procedures Satellite A300/Satellite Pro A 300/EQUIUM A300/SATEGO A300 Maintenance Manual 4-19 Installing the HDD Install the HDD according to the following pro cedures and Figures 4-6, 4-7, 4-8, 4-9, 4-10, 4-11. CAUTION: To avoid damage, always hold the HDD only by its sides. 1. Attach the HDD chassis. 2. Secure the HDD and it[...]

4 Replacement Procedures 4.3 ODD Bay Module 4.3 ODD Bay Module Removing the ODD Bay Module NOTE: The installation and removal procedures are the same for all the modules that can be installed in the ODD bay. See the appropriate sections for the disassembly procedures of specific modules. Remove the ODD bay module according to the following procedur[...]

4.3 ODD Bay Module 4 Replacement Procedures Satellite A300/Satellite Pro A 300/EQUIUM A300/SATEGO A300 Maintenance Manual 4-21 Installing the ODD Bay Module Install the ODD bay module according to the following procedures and Figures 4-12. 1. Place the ODD bay module in the correct position and slide it in. 2. Push it in until it clicks into place.[...]

4 Replacement Procedures 4.3 ODD Bay Module Disassembling the ODD Drive NOTE: Do not disassemble the ODD drive when it is working normally. Disassemble or replace the ODD drive only if it fails. Disassemble the ODD drive according to the following procedures and Figure 4-13. 1. Remove two M2x4 black flat head screws. 2. Remove the bracket. M2x4 bla[...]

4.4 Keyboard Cover and Keyboard 4 Replacement Procedures 4.4 Key board Cover and Keyboard Removing the Keyboard Cover and Keyboard Remove the Keyboard Cover and Keyboard according to the following procedures and Figure 4-14, 4-15. 1. Release the following 15 latches on the switch cover, in the following order: - Seven bottom latches - Eight front l[...]

4 Replacement Procedures 4.4 Keyboard Cover and Keyboard M x black flat head screw - 2.5 2.5 Keyboard CN1 1 Figure 4-15 Removing the Keyboard cover and keyboard 4-24 Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200 Maintenance Manual[...]

4.4 Keyboard Cover and Keyboard 4 Replacement Procedures Satellite A300/Satellite Pro A 300/EQUIUM A300/SATEGO A300 Maintenance Manual 4-25 Installing the Keyboard Cover and Keyboard Install the Keyboard cover and keyboard according to the following procedures and Figure 4- 14, 4-15. 1. Connect the keyboard cable to CN11 on the system board. 2. Sec[...]

4 Replacement Procedures 4.5 Wireless Lan Card 4 1 4.5 Wireless LAN Card Removing the Wireless LAN Card Remove the wireless LAN card according to the following procedures and Figure 4-16. CAUTION : Do not touch the connectors on the wireless LAN card and in the computer with your bare hands. Wireless LAN cards can fail if they are contaminated with[...]

4.5 Wireless Lan Card 4 Replacement Procedures Satellite A300/Satellite Pro A 300/EQUIUM A300/SATEGO A300 Maintenance Manual 4-27 Installing the Wireless LAN Card Install the wireless LAN card according to the following procedures and Figure 4-16. 1. Insert the wireless LAN card into the connector an angle of 45 degrees. 2. Press down on the wirele[...]

4 Replacement Procedures 4.6 MDC Module 4.6 MDC Module Removing the MDC Module Remove the MDC Module (Modem Daughter Card) according to the following procedures and Figures 4-17, after checking that the computer is turned off in boot mode. CAUTION: Remove the MDC module after turning off the computer. If this is violated, the computer or MDC module[...]

4.6 MDC Module 4 Replacement Procedures Satellite A300/Satellite Pro A 300/EQUIUM A300/SATEGO A300 Maintenance Manual 4-29 Installing the MDC Module Install the MDC module according to the following procedures and Figures 4-17, after checking that the computer is turned off in boot mode. CAUTION: Install the MDC module after turnin g off the comput[...]

4 Replacement Procedures 4.7 Top Cover 4.7 Top Cover Removing the Top Cover Remove the top cover according to the following procedures and Figures 4-18 and 4-19. 1. Turn the computer upside down and remove the following twenty screws: - Seventeen M2.5x6 black bind screws and three M2x4 black bind screws. M2x4 black bind screw M2 5x6 black bind scre[...]

4.7 Top Cover 4 Replacement Procedures M2x4 white flat screw CN916 CN12 CN1 CN3 Figure 4-19 Removing the Top Cover Installing the Top Cover Install the top cover with the display assembly according to the following procedures and Figures 4-18, 4-19. 1. Seat the top cover, adjusting its position. 2. Secure the top cover with M2x4 white flat head scr[...]

4 Replacement Procedures 4.8 Speakers 4.8 Speakers Removing the Speakers Remove the Speakers according to the following procedures and Figure 4-20. 1. Disconnect the speaker cable from CN2. 2. Remove one M2.5x3 white flat head screw securing the left speaker. 3. Remove one M2.5x3 white flat head screw securing the right speaker. 4. Remove the left [...]

4.9 Audio Cable 4 Replacement Procedures 4.9 Audio Cable Removing the Audio cable Remove the Audio cable according to the following procedures and Figures 4-21. 1. Disconnect audio cable connector from CN8. 2. Remove the two M2.5x3 white flat head screws securing the audio cable. 3. Remove the audio cable. CN6 M2 5x3 white flat screw . Figure 4-21 [...]

4 Replacement Procedures 4.9 Audio Cable 4-34 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual Installing the Audio cable Install the Audio cable according to the following procedures and Figures 4-21. 1. Connect audio cable to connector CN8 on the system board. 2. Secure the two M2.5x3 white flat head screws securing th[...]

4.10 Display Assembly 4 Replacement Procedures 4.10 Display Assembly Removing the Display Assembly CAUTION: Use care to avoid that the antenna cable is not caught between the display assembly and computer. Remove the display assembly according to the following procedures and Figures 4-22. 1. Disconnect the LCD/FL cable from CN 6, Microphone cable c[...]

4 Replacement Procedures 4.10 Display Assembly 4-36 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual Installing the Display Assembly Install the display assembly according to the following procedures and Figures 4-22. 1. Place the display panel in the correct position and set the wireless antenna cable into the top cover[...]

4.11 System Board, AC-IN cable, Fan and Robson card 4 Replacement Procedures 4.11 System Board, AC-IN cable, Fan and Robson card Removing the System Board, AC-IN cable, Fan and Robson card NOTE: Be careful of the eject button for the PC card. It can be damaged when removing the board. Make sure it is securely installed. Remove the System Board, MIC[...]

4 Replacement Procedures 4.11 System Board, AC-IN cable Fan and Robson card 11. Release two M2x2 black flat head screw securing the robson card. 12. Remove the Robson card. M2x4 5 black flat head screw . M2x2 black flat head screw CN902 Figure 4-24 Removing the system board 4-38 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 0 Maintenanc[...]

4.11 System Board, AC-IN cable, Fan and Robson card 4 Replacement Procedures Satellite A300/Satellite Pro A 300/EQUIUM A300/SATEGO A300 Maintenance Manual 4 - 39 Installing the System Board, AC-IN cable, Fan and Robson card Install the System Board, AC-IN cable, Fan and Robson card according to the following procedures and figure 4-23, 4-24. NOTE: [...]

4 Replacement Procedures 4.12 CPU Cooling Module 4.12 CPU Cooling Module CAUTION: When removing the cooling module, keep the following in mind: The cooling module can become very hot during operation. Be sure to let it cool down before starting the repair work. Do not touch or cause damage to the fan in the cooling module. NOTE: The screws for Step[...]

4.12 CPU Cooling Module 4 Replacement Procedures Figure 4-26 Applying silicon grease Installing the CPU Cooling Module and Fan Install the cooling Module according to the following procedures and Figures 4-23, 4-24. CAUTION: When installing the cooling module, keep the following in mind: 1. Be sure to confirm the correct position for the module. 2.[...]

4 Replacement Procedures 4.12 CPU Cooling Module 4-42 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 0 Maintenance Manual Installing the CPU Cooling Module and Fan (for VGA card Model) Install the cooling Module according to the following procedures and Figures 4-25, 4-26. CAUTION: When installing the cooling module, keep the following i[...]

4.12 CPU Cooling Module 4 Replacement Procedures Removing the CPU Cooling Module CAUTION: When removing the cooling module, keep the following in mind: The cooling module can become very hot during operation. Be sure to let it cool down before starting the repair work. Do not touch or cause damage to the fan in the cooling module. Remove the CPU co[...]

4 Replacement Procedures 4.12 CPU Cooling Module Figure 4-28 Applying silicon grease 1. If the thermal pad is broken, replace new thermal pad into correct position, therm al pad part number is V000933800. Figure 4-29 Replace new thermal pad into correct position. 2. Tear down the tap on the thermal pad. Figure 4-30 Tear down the tape 4-44 Satellite[...]

4.12 CPU Cooling Module 4 Replacement Procedures Satellite A300/Satellite Pro A 300/EQUIUM A300/SATEGO A300 Maintenance Manual 4 - 45 Installing the CPU Cooling Module and Fan Install the cooling Module according to the following procedures and Figures 4-27, 4-28. CAUTION: When installing the cooling module, keep the following in mind: 1. Be sure t[...]

4 Replacement Procedures 4.13 CPU 4.13 CPU Removing the CPU Remove the CPU according to the following procedures and Figures 4-29, 4-30 and 4-31. CAUTION: When removing the CPU, keep the following in mind: The CPU can become very hot during operation. Be sure to let it cool down before starting repair work. NOTE: FOXCONN CPU socket will be 180 degr[...]

4.13 CPU 4 Replacement Procedures Installing the CPU Install the CPU according to the following procedures and Figures 4-30, 4-31. 1. Check that the triangle on the cam is in the unlock position. 2. Attach the CPU to the correct position in the CPU socket. Align the CPU with the CPU socket by using the triangle as a guide. Figure 4-30 Installing th[...]

4 Replacement Procedures 4.13 CPU 3. Secure the CPU by rotating the cam 120 degrees to the right with a flat-blade screwdriver. NOTE: FOXCONN CPU socket will be 180 degrees to the left. Figure 4-31 Securing the CPU 4-48 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 0 Maintenance Manual[...]

4.14 USB board , Bluetooth Card, FM card and Felica card 4 Replacement Procedures 4.14 USB board, Bluetooth Card, FM card and Felica card Removing the USB board, Bluetooth Card, FM card and Felica card Remove the USB board, Bluetooth Card, FM card and Felica card according to the following procedures and Figures 4-32. 1. Remove USB cable from CN16 [...]

4 Replacement Procedures 4.14 USB board, Bluetooth Card, FM card and Felica card 4-50 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 0 Maintenance Manual Installing the USB board, Bluetooth Card, FM card and Felica card Install the USB board and Bluetooth card, FM card and Felica card according to the following procedures and Figure 4-32[...]

4.15 Display Mask 4 Replacement Procedures 4.15 Display Mask Removing the Display Mask Remove the display mask according to the following procedures and Figure 4-33, 4-34. 1. Remove the following 6 seals on the display module in that order: - Four black seals on the bottom - Two black seals on the top 2. Remove the following 6 screws on the display[...]

4 Replacement Procedures 4.15 Display Mask 1 2 5 4 3 Display mask Latch Figure 4-34 Removing the display mask 4-52 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 0 Maintenance Manual[...]

4.15 Display Mask 4 Replacement Procedures Satellite A300/Satellite Pro A 300/EQUIUM A300/SATEGO A300 Maintenance Manual 4 - 53 Installing the Display Mask Install the display mask according to the following procedures and Figure 4-33, 4-34. 1. Seat the display mask in the correct position and secure the following 20 latches, in that order: - Seven[...]

4 Replacement Procedures 4.16 FL Inverter Board 4.16 FL Inverter Board Removing the FL Inverter Board Remove the FL inverter board according to the following procedures and Figures 4-35. 1. Remove one M2.5x4.5 white flat head screw securing the inverter board bracket. 2. Remove one M2x3 black flat head screw securing the inverter. M 2.5x4.5 white f[...]

4.16 FL Inverter Board 4 Replacement Procedures Satellite A300/Satellite Pro A 300/EQUIUM A300/SATEGO A300 Maintenance Manual 4 - 55 Installing the FL Inverter Board Install the FL inverter board according to the following procedures and Figures 4-35. 1. Connect the LCD/FL cable to LCD/FL connector, and connect the HV cable to the HV connector. 2. [...]

4 Replacement Procedures 4.17 LCD Module 4-56 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 0 Maintenance Manual 4.17 LCD Modules NOTE: ICs are fragile. Use extreme care not to apply pressure to the ICs along the edges of the LCD module. NOTE: Dispose of used LCD panels (fluorescent (FL) tubes) as required by local ordinances or regulat[...]

4.17 LCD Module 4 Replacement Procedure s M 2.5x4.5 w ite flat head screw h- LCD module Figure 4-36 Removing the 15.1-inch LCD module and screws M2x3 black flat head screw - M2x3 black flat head screw - LCD module Left LCD bracket Right LCD bracket Figure 4-37 Removing the 15.1-inch LCD module Satellite A300/Satellite Pro A 300/EQUIUM A300/SATEGO A[...]

4 Replacement Procedures 4.17 LCD Module 4-58 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 0 Maintenance Manual Installing the 15.1-inch LCD Module NOTE: LCD/FL cable must be carefully peeled away before disconnecting it from the module. Install the 15.1-inch LCD module according to the following procedures and Figures 4-36, 4-37. 1. T[...]

4.18 CCD Board and MIC 4 Replacement Procedure s 4.18 CCD Board and MIC Removing the CCD Board and MIC Remove the FL inverter board according to the following procedures and Figure 4-38. 1. Disconnect the CCD cable from the CCD module connector and rem ove the CCD board. CCD board MIC CCD board cable Figure 4-38 Removing the CCD board and MIC 2. Li[...]

4 Replacement Procedures 4.18 CCD Board and MIC 4-60 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 0 Maintenance Manual Installing the CCD Board and MIC Install the FL inverter board according to the following procedures and Figure 4-38. 1. Connect the CCD module cable to CCD module connector. 2. Seat the CCD module, MIC in the correct [...]

4.19 Power board, Switch board, Touch Pad board 4 Replacement Procedure s 4.19 Power board,Switch board, Touc h Pad board, touch pad and Finger print board. Removing the Power board, Switch board, Touch Pad board, Touch Pad and Finger print board Remove the Power board, Switch board, Touch Pad board, Touch Pad and Finger print board according to th[...]

4 Replacement Procedures 4.19 Power board, Switch board, Touch Pad board 4-62 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 0 Maintenance Manual Installing the Power board, Switch board, Touch Pad board, Touch Pad and Finger print board Install the Power board, Switch board, Touch Pad board, Touch Pad and Finger print board according to[...]

4.19 Power board, Switch board, Touch Pad board 4 Replacement Procedure s Removing the Power board, Touch Pad board and Finger print board (MMB board and Wide Lux touch pad) Remove the Power board, Touch Pad board and Finger print board according to the following procedures and Figure 4-40. 1. Release two M2x0.4 lack flat head screws securing the p[...]

4 Replacement Procedures 4.19 Power board, Switch board, Touch Pad board 4-64 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 0 Maintenance Manual Installing the Power board, Touch Pad board and Finger print board (MMB board and Wide Lux touch pad) Install the Power board, Touch Pad board and Finger print board according to the following [...]

6000 1 次 Appendices[...]

Appendices App-ii Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 M aintenance Manual Appendix Contents Appendix A Handling the LCD Module .......................................................................... A-1 Appendix B Board Layout ................................................................................................. [...]

Appendices Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual App-iii C.24 CN804 DDR2 DIMM0 Socket (200-Pin) .................................................. C-15 C.25 CN805 DDR2 DIMM1 Socket (200-Pin) .................................................. C-18 C.26 CN806 S-VIDEO Connector (4-Pin) ...........................[...]

Apx. A Handling the LCD Module Appendices Appendix A Appendix A Handling the LCD Module Precautions for handling the LCD module The LCD module can be easily damaged during assem bly or disassembly. Observe the following precautions when handling the LCD module: 1. When installing the LCD module in the LCD cover, be sure to seat it so that it is pro[...]

Appendices Apx. A Handling the LCD Module 3. If the panel’s surface gets dirty, wipe it with cotton or a soft cloth. If it is still dirty, try breathing on the surface to create a light condensate and wipe it again. If the surface is very dirty, we recomm end a CRT cleaning agent. Apply the agent to a cloth and then wipe the panel’s surface. Do[...]

Apx. A Handling the LCD Module Appendices 5. Glass is used in the panel, so be careful not to drop it or let it strike a hard object, which could cause breakage or cracks. 6. CMOS-LSI circuits are used in the module, so guard against damage from electrostatic discharge. Be sure to wear a wrist or ankle ground when handling the module. Satellite A30[...]

Appendices Apx. A Handling the LCD Module 7. Do not expose the module to direct sunlight or strong ultraviolet rays for long periods. 8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage. A-4 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEG[...]

Apx. A Handling the LCD Module Appendices 9. Do not disassemble the LCD module. Disassem bly can cause malfunctions. 10. If you transport the module, do not use packing material that contains epoxy resin (amine) or silicon glue (alcohol or oxime). These m aterials can release gas that can damage the panel’s polarization. Satellite A300/Satellite [...]

Apx. B Board Layout Appendices Appendix B Appendix B Board Layout B.1 System Board Front View Figure B-1 Board layout (front) Satellite A300/Satellite Pro A 300/EQUIUM A300/SATEGO A300 Maintenance Manual B-1[...]

Appendices Apx. B Board Layout Figure B-2 Board layout ( back ) B-2 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual[...]

Appendices Apx. C Pin Assignments Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual C-1 Appendix C C-3 C.1 CN1 Power/B Connector (4-Pin) ............................................................. C-3 C.2 CN2 Internal Speaker Connector (6-Pin) ................................................. C-3 C.3 CN3 Hot Key/B Conne[...]

Appendices Apx. C Pin Assignments C-2 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual C.32 CN813 HDD#1 Connector (22-Pin) ............................................................C-23 C.33 CN814 USB Port#1 Connector (4-Pin) .......................................................C-24 C.34 CN815 CARD READER Socket (44-[...]

Appendices Apx. C Pin Assignments Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual C-3 Appendix C Appendix C Pin Assignments System Board C.1 CN1 Power/B Connector (4-Pin) Table C-1 Power/B Connector pin assignments (4-Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 DGND' - 2 /N$41603' - 3 /PWR_SWIN#_3&a[...]

Appendices Apx. C Pin Assignments C-4 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual C.4 CN4 Camera Connector (5-Pin) Table C-4 Camera Connector pin assignments (5-Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 '/+V5S_CAMERA' - 2 '/USB_P7-' I/O 3 '/USB_P7+' I/O 4 'DGND' -[...]

Appendices Apx. C Pin Assignments Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual C-5 17 /LVDS_TXDU0N' O 18 /LVDS_TXDU1N' O 19 /LVDS_TXDU0P' O 20 /LVDS_TXDU1P' O 21 /LVDS_TXDU2N' O 22 /LVDS_TXCUN' O 23 /LVDS_TXDU2P' O 24 /LVDS_TXCUP' O 25 DGND' - 26 DGND' - 27 /LCM_DDCPC[...]

Appendices Apx. C Pin Assignments C-6 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual 11 - - 12 /N$5072' I/O 13 /N$5071' I/O 14 -' - C.9 CN9 Broadcom Connector (52-Pin) Table C-9 Broadcom Connector pin assignments (52-Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 - -- 2 /+V3S' - 3 - - 4 DGND[...]

Appendices Apx. C Pin Assignments Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual C-7 C.10 CN10 Mini Card Connector (52-Pin) Table C-10 Mini Card Connector pin assignments (52-Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 /PCIE_WAKE#' I/O- 2 /+V3S' - 3 /CH_DATA' I/O 4 DGND' - 5 /CH_CLK'[...]

Appendices Apx. C Pin Assignments C-8 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual Pin No. Signal Name I/O Pin No. Signal Name I/O 1 ANAGND' - 2 /MIC_IN' I C.12 CN12 Touch Pad Connector (6-Pin) Table C-12 Touch Pad Connector pin assignments (6-Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 DGND&apos[...]

Appendices Apx. C Pin Assignments Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual C-9 C.14 CN14 FingerPrint/B Connector (4-Pin) Table C-14 FingerPrint/B Connector pin assignments (4-Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 DGND' -2 /USB_P8P' I/O 3 /USB_P8N' I/O 4 /+V3S' - C.15 CN15 FM C[...]

Appendices Apx. C Pin Assignments C-10 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance M anual 13 /PERST#' I/O 14 /+V3_EXP' - 15 /+V3_EXP' - 16 /N$67486' I/O 17 /CPPE#' I/O 18 /CLK_R_PCIE_NCARD#' I/O 19 /CLK_R_PCIE_NCARD' I/O 20 DGND' - 21 /PCIE_C_RXN_NCARD' I/O 22 /PCIE_C_RXP_NCARD[...]

Appendices Apx. C Pin Assignments Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual C-11 1 /N$30808' - 2 /N$30808' I/O- 3 /N$71402' I/O 4 DGND' O 5 /N$70795' I/O 6 /N$83390' O 7 /N$83389' I/O 8 DGND' - 9 DGND' - C.21 CN801 DC-IN Connector (4-Pin) Table C-21 DC-IN Connector pin [...]

Appendices Apx. C Pin Assignments C-12 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance M anual 7 /+V1.8S' - 129 /PEG_C_RXN5' I/O 8 /+V1.8S' - 130 /PEG_C_TXN5' I/O 9 /+V1.8S' - 131 /PEG_C_RXP5' I/O 10 /+V1.8S' - 132 /PEG_C_TXP5' I/O 11 /+V1.8S' - 133 DGND' - 12 /+V1.8S' - 1[...]

Appendices Apx. C Pin Assignments Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual C-13 55 DGND' - 164 DGND' - 56 DGND' - 165 /CRTR' I/O 57 /LVDS_TXDU0P' I/O 166 /CLK_R_PEG_REF' I/O 58 /LVDS_TXDL2P' I/O 167 DGND' - 59 /LVDS_TXDU0N' I/O 168 /CLK_R_PEG_REF#' I/O 60 /LVDS_TX[...]

Appendices Apx. C Pin Assignments C-14 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance M anual 90 /PEG_C_TXP12' I/O 199 /VGA_THERM_DATA' I/O 91 DGND' - 200 /HDMI_TXCP' I/O 92 DGND' - 201 /VGA_THERM_CLK' I/O 93 /PEG_C_RXN11' I/O 202 DGND' - 94 /PEG_C_TXN11' I/O 203 /VGA_ID_S' I/[...]

Appendices Apx. C Pin Assignments Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual C-15 C.24 CN804 DDR2 DIMM0 Socket (200-Pin) Table C-24 DDR2 DIMM0 Socket pin assignments (200-Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 /M_VREF' I/O 2 DGND' - 3 DGND' - 4 /MA_DATA(4)' I/O 5 /MA_DATA(0)&apos[...]

Appendices Apx. C Pin Assignments C-16 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance M anual 63 /MA_DATA(25)' I/O 64 /MA_DATA(29)' I/O 65 DGND' - 66 DGND' I/O 67 /MA_DM(3)' I/O 68 /MA_DQS#(3)' I/O 69 - - 70 /MA_DQS(3)' I/O 71 DGND' - 72 DGND' - 73 /MA_DATA(26)' I/O 74 /MA_DAT[...]

Appendices Apx. C Pin Assignments Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual C-17 133 DGND' - 134 /MA_DATA(38)' I/O 135 /MA_DATA(34)' I/O 136 /MA_DATA(39)' I/O 137 /MA_DATA(35)' I/O 138 DGND' - 139 DGND' - 140 /MA_DATA(44)' I/O 141 /MA_DATA(40)' I/O 142 /MA_DATA(45)&apos[...]

Appendices Apx. C Pin Assignments C-18 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance M anual C.25 CN805 DDR2 DIMM1 Socket (200-Pin) Table C-25 DDR2 DIMM1 Socket pin assignments (200-Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 /M_VREF' I/O 2 DGND' - 3 DGND' - 4 /MB_DATA(4)' I/O 5 /MB_DATA(0)&apo[...]

Appendices Apx. C Pin Assignments Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual C-19 63 /MB_DATA(25)' I/O 64 /MB_DATA(29)' I/O 65 DGND' - 66 DGND' I/O 67 /MB_DM(3)' I/O 68 /MB_DQS#(3)' I/O 69 - - 70 /MB_DQS(3)' I/O 71 DGND' - 72 DGND' - 73 /MB_DATA(26)' I/O 74 /MB_DATA[...]

Appendices Apx. C Pin Assignments C-20 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance M anual 133 DGND' - 134 /MB_DATA(38)' I/O 135 /MB_DATA(34)' I/O 136 /MB_DATA(39)' I/O 137 /MB_DATA(35)' I/O 138 DGND' - 139 DGND' - 140 /MB_DATA(44)' I/O 141 /MB_DATA(40)' I/O 142 /MB_DATA(45)&apo[...]

Appendices Apx. C Pin Assignments Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual C-21 C.26 CN806 S-VIDEO Connector (4-Pin) Table C-26 S-VIDEO Connector pin assignments (4-Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 DGND' - 2 DGND' - 3 /SVID_L_LUMA' I/O 4 /SVID_L_CHROMA' I/O C.27 CN808 HDM[...]

Appendices Apx. C Pin Assignments C-22 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance M anual C.29 CN810 ROBSON Card Connector (52-Pin) Table C-29 ROBSON Card Connector pin assignments (52-Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 - - 2 /+V3S' - 3 - - 4 DGND' - 5 - - 6 /+V1.5S' - 7 /CLKREQ_R_ROBSON[...]

Appendices Apx. C Pin Assignments Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual C-23 C.30 CN811 USB Port#0 Connector (4-Pin) Table C-30 USB Port#0 Connector pin assignments (4-Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 /USBVCC1' - 2 /USB_L_P0-' I/O 3 /USB_L_P0+' I/O 4 USB_GND' - C.31 CN[...]

Appendices Apx. C Pin Assignments C-24 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance M anual 13 DGND' -1 4 /+V5S' - 15 /+V5S' -1 6 /+V5S' - 17 DGND' -1 8 - - 19 DGND' -2 0 - - 21 - -2 2 - - C.33 CN814 USB Port#1 Connector (4-Pin) Table C-33 USB Port#1 Connector pin assignments (4-Pin) Pin No. Si[...]

Appendices Apx. C Pin Assignments Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual C-25 29 /MDIO19' I/O 30 /MDIO08' I/O - 31 /MDIO05' I/O 32 DGND' - 33 /MDIO10' I/O 34 /MDIO11' I/O 35 /MDIO12' I/O 36 /MDIO13' I/O 37 /MDIO14' I/O 38 /MDIO15' I/O 39 /MDIO16' I/O 40 /MD[...]

Appendices Apx. C Pin Assignments C-26 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance M anual 1 '/FM_ANT' I 2 'GND_FM' - C.38 CN9062 FM_R_L Connector (2-Pin) Table C-38 FM_R_L Connector pin assignments (2-Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 '/DB_FM_R' I 2 '/DB_FM_L' I[...]

Appendices Apx. C Pin Assignments Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual C-27 C.41 JACK802 MICRO Phone Connector (6-Pin) Table C-41 MICRO Phone Connector pin assignments (6-Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 /N$10326' - 2 /N$10321' - 3 /N$10319' - 4 /MICS' I/O 5 ANAGND&ap[...]

Keyboard Scan/Character Codes Appendices Satellite A300/Satellite Pro A300 /EQUIUM A300/SATEGO A300 Maintenance Manual D-1 Apx. D Keyboard Scan/Character Codes Appendix D Keyboard Scan/Character Codes Table D-1 Scan codes (set 1 and set 2) (1/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note 01 ‘ ~ 29 A9 0E F0 0E 02 1 ! 02 82 16 [...]

Appendices Keyboard Scan/Character Codes D-2 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 M aintenance Manual Table D-1 Scan codes (set 1 and set 2) (2/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note 29 | 2B AB 5D F0 5D *5 30 Caps Lock 3A BA 58 F0 58 31 A 1E 9E 1C F0 1C 32 S 1F 9F 1B F0 1B 33 D 20 A0 23 F0 23 34 F [...]

Keyboard Scan/Character Codes Appendices Satellite A300/Satellite Pro A300 /EQUIUM A300/SATEGO A300 Maintenance Manual D-3 Table D-1 Scan codes (set 1 and set 2) (3/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note 58 Ctrl 1D 9D 14 F0 14 *3 60 Alt (L) 38 B8 11 F0 11 *3 61 Space 39 B9 29 F0 29 62 ALT (R) E0 38 E0 B8 E0 11 E0 F0 11 7[...]

Appendices Keyboard Scan/Character Codes D-4 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 M aintenance Manual Table D-1 Scan codes (set 1 and set 2) (4/4) Cap Code set 1 Code set 2 No. Keytop Make Break Make Break Note 122 F11 57 D7 78 F0 78 *3 123 F12 58 D8 7 F0 7 *3 124 PrintSc *6 *6 *6 *6 *6 126 Pause *7 *7 *7 *7 *7 202 Fn — — ?[...]

Keyboard Scan/Character Codes Appendices Satellite A300/Satellite Pro A300 /EQUIUM A300/SATEGO A300 Maintenance Manual D-5 Table D-2 Scan codes with left Shift key Code set 1 Code set 2 Cap No. Key top Make Break Make Break 5 5 / E0 AA E0 35 E0 B5 E0 2A E0 F0 12 E0 4A E0 F0 4A E0 12 7 5 I N S E0 AA E0 52 E0 D2 E0 2A E0 F0 12 E0 70 E0 F0 70 E0 12 7 [...]

Appendices Keyboard Scan/Character Codes D-6 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 M aintenance Manual Table D-3 Scan codes in Numlock mode Code set 1 Code set 2 Cap No. Key top Make Break Make Break 7 5 I N S E0 2A E0 52 E0 D2 E0 AA E0 12 E0 70 E0 F0 70 E0 F0 12 7 6 DE L E0 2A E0 53 E0 D3 E0 AA E0 12 E0 71 E0 F0 71 E0 F0 12 79 [...]

Keyboard Scan/Character Codes Appendices Satellite A300/Satellite Pro A300 /EQUIUM A300/SATEGO A300 Maintenance Manual D-7 Table D-5 Scan codes in overlay mode Code set 1 Code set 2 Cap No. Keytop Make Break Make Break 08 7 (7) 47 C7 6C F0 6C 09 8 (8) 48 C8 75 F0 75 10 9 (9) 49 C9 7D F0 7D 11 0 (*) 37 B7 7C F0 7C 23 U (4) 4B CB 6B F0 6B 24 I (5) 4C[...]

Appendices Keyboard Scan/Character Codes D-8 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 M aintenance Manual Table D-7 No.126 key scan code Code set 1 Code set 2 Key top Shift Make Make Pause C omm on * E1 1D 45 E1 9D C5 E1 14 77 E1 F0 14 F0 77 Ctrl* E0 46 E0 C6 E0 7E E0 F0 7E *: This key generates only make codes.[...]

Apx. E Key Layout Appendices Apx. E Key Layout Appendix E Key Layout E.1 United States (US) Keyboard Figure E-1 US keyboard E.2 Japan (JP) Keyboard Figure E-2 JP keyboard Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintena nce Manual E-1[...]

Appendices Apx E Key Layout E.3 Spanish (SP) Keyboard Figure E-3 SP keyboard E.4 Korean (KR) Keyboard Figure E-4 KR keyboard E-2 Satellite A300/S atellite Pro A300/EQUIUM A300/SATEGO A300 M aintenance Manual[...]

Apx.E Key Layout Appendices E.5 Canadian Bilingual (QB) Keyboard Figure E-5 QB keyboard E.6 French (FR) Keyboard Figure E-6 FR keyboard Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintena nce Manual E-3[...]

Appendices Apx E Key Layout E.7 German (GR) Keyboard Figure E-7 GR keyboard E.8 Italian (IT) Keyboard Figure E-8 IT keyboard E-4 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manua l[...]

Apx E Key Layout Appendices E.9 Taiwan (TC) Keyboard Figure E-9 TC keyboard E.10 Portuguese (PT) Keyboard Figure E-10 PT keyboard Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintena nce Manual E-5[...]

Appendices Apx E Key Layout E.11 DU, UE, US International (USE) Keyboard Figure E-11 USE keyboard E.12 Arabic (AR) Keyboard Figure E-12 AR keyboard E-6 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual[...]

Apx E Key Layout Appendices E.13 Belgian (BE) Keyboard Figure E-13 BE keyboard E.14 Russian (RU) Keyboard Figure E-14 RU keyboard Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintena nce Manual E-7[...]

Appendices Apx E Key Layout E.15 Swiss/Switzerland (SL) Keyboard Figure E-15 SL keyboard E.16 Swedish (SW) Keyboard Figure E-16 SW keyboard E-8 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual[...]

Apx E Key Layout Appendices E.17 Norwegian (NO) Keyboard Figure E-17 NO keyboard E.18 Danish (DK) Keyboard Figure E-18 DK keyboard Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintena nce Manual E-9[...]

Appendices Apx E Key Layout E.19 Turkey (TR) Keyboard Figure E-19 TR keyboard E.20 Greek (GK) Keyboard Figure E-20 GK keyboard E-10 Satellite A300/Satellite Pro A300/ EQUIUM A 300/SATEGO A300 Maintenance Manual[...]

Apx E Key Layout Appendices E.21 Canadian Multinational (CM) Keyboard Figure E-21 CM keyboard E.22 Herbrew (HE) Keyboard Figure E-22 HE keyboard Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintena nce Manual E-11[...]

Appendices Apx E Key Layout E.23 Czech (CZ) Keyboard Figure E-23 CZ keyboard E.24 Scandinavian (N5) Keyboard Figure E-24 N5 keyboard E-12 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300Maintenance Man ual[...]

Apx E Key Layout Appendices E.25 Hungary (HU) Keyboard Figure E-25 HU keyboard E.26 Slovakian (SK) Keyboard Figure E-26 SK keyboard Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintena nce Manual E-13[...]

Appendices Apx E Key Layout E.27 Yugoslavia (YU) Keyboard Figure E-27 YU keyboard E.28 Thai (TH) Keyboard Figure E-28 TH keyboard E-14 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300Maintenance Man ual[...]

Apx E Key Layout Appendices E.29 United Kingdom (EN) Keyboard Figure E-29 EN keyboard E.30 Turkish F (TF) Keyboard Figure E-30 TF keyboard Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintena nce Manual E-15[...]

Apx. F BIOS Rewrite Procedures Appendices Satellite A300/Satellite Pro A300/EQUIUM A300/ SATEGO A300 Maintenance Manual F-1 Appendix G Appendix F BIOS Rewrite Procedures This Appendix explains how to rewrite the system BIOS program when you update the system BIOS . Tools To rewrite the BIOS, you need the following tool:  BIOS/EC/KBC rewriting di[...]

Apx. G EC/KBC Rewrite Procedures Appendices Satellite A300/Satellite Pro A300/EQUIUM A300/ SATEGO A300 Maintenance Manual G-1 Appendix H Appendix G EC/KBC Rewrite Procedures This Appendix explains how to rewrite the EC/KBC system program when you update the EC/KBC system. Tools To rewrite the EC/KBC, you need the following tool:  BIOS/EC/KBC rew[...]