Toshiba PSC0YU-04105M Bedienungsanleitung

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216

Zur Seite of

Richtige Gebrauchsanleitung

Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung Toshiba PSC0YU-04105M an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von Toshiba PSC0YU-04105M, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.

Was ist eine Gebrauchsanleitung?

Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung Toshiba PSC0YU-04105M die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.

Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung Toshiba PSC0YU-04105M. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.

Was sollte also eine ideale Gebrauchsanleitung beinhalten?

Die Gebrauchsanleitung Toshiba PSC0YU-04105M sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts Toshiba PSC0YU-04105M
- Den Namen des Produzenten und das Produktionsjahr des Geräts Toshiba PSC0YU-04105M
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts Toshiba PSC0YU-04105M
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen

Warum lesen wir keine Gebrauchsanleitungen?

Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von Toshiba PSC0YU-04105M zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von Toshiba PSC0YU-04105M und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service Toshiba finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von Toshiba PSC0YU-04105M zu überspringen, wie es bei der Papierform passiert.

Warum sollte man Gebrauchsanleitungen lesen?

In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts Toshiba PSC0YU-04105M, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.

Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von Toshiba PSC0YU-04105M widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.

Inhaltsverzeichnis der Gebrauchsanleitungen

  • Seite 1

    Satellite/Satellite Pro/C650D/C 655D Maintenance Manual Toshiba Personal Computer Satellite C650D/C655D (PSC16x/PSC17x) Maintenance Manual TOSHIBA CORPORATION S/ No[...]

  • Seite 2

    ii Satellite/Satellite Pro/C650D/C 655D Maintenance Manual Copyright © 2010 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed with respect to the use of the inform ation contained herein. Toshiba Satelli[...]

  • Seite 3

    Satellite/Satellite Pro/C650D/C 655D Maintenance Manual iii Preface This maintenance manual describes how to perform hardware service maintenance for the Toshiba Personal Computer Satellite/Satellite Pro/C650D/C655D , referred to as Satellite/Satellite Pro/C650D/C655D in this manual. The procedures described in this manual are intended to help serv[...]

  • Seite 4

    iv Satellite/Satellite Pro/C650D/C 655D Maintenance Manual The manual is divided into the following parts: Chapter 1 Hardware Overview describes the Satellite/Satellite Pro/C650D/C655D system unit and each FRU. Chapter 2 Troubleshooting Procedures explains how to diagnose and resolve FRU problems. Chapter 3 Test and Diagnostics describes how to per[...]

  • Seite 5

    Satellite/Satellite Pro/C650D/C 655D Maintenance Manual v Conventions This manual uses the following formats to describe, identify, and highlight term s and operating procedures. Acronyms On the first appearance and whenever necessary for clarification acronyms are enclosed in parentheses following their definition. For example: Read Only Memory (R[...]

  • Seite 6

    vi Satellite/Satellite Pro/C650D/C 655D Maintenance Manual Table of Contents Chapter 1 Hardware Overview 1.1 Features .................................................................................................................. ..............3 1.2 System Unit Components ..........................................................................[...]

  • Seite 7

    Satellite/Satellite Pro/C650D/C 655D Maintenance Manual vii 2.6 Keyboard .............................................................................................................. 2-1 4 Procedure 1 Test Program Check ..................................................................... 2-14 Procedure 2 Connector Check and Replacement Check ....[...]

  • Seite 8

    viii Satellite/Satellite Pro/C650D/C 655D Maintenance Manual 3.2.8 System Information ................................................................................10 3.2.9 View Logs ..............................................................................................12 3.2.10 Exit to Free DOS ............................................[...]

  • Seite 9

    Satellite/Satellite Pro/C650D/C 655D Maintenance Manual ix Tools and Equipment ........................................................................................... 4-6 Screw Tightening Torque .................................................................................... 4-6 Colors of Screw Shanks .......................................[...]

  • Seite 10

    x Satellite/Satellite Pro/C650D/C 655D Maintenance Manual 4.9 Display Assembly ................................................................................................ 4-25 Removing the Display Assembly ....................................................................... 4-25 Installing the Display Assembly ..............................[...]

  • Seite 11

    Satellite/Satellite Pro/C650D/C 655D Maintenance Manual xi Installing the Speakers ....................................................................................... 4-51 4.20 Touchpad Bracket ................................................................................................ 4-52 Removing the Touchpad Bracket ....................[...]

  • Seite 12

    xii Satellite/Satellite Pro/C650D/C 655D Maintenance Manual Appendices Appendix A Handling the LCD Module ........................................................................... A-1 Appendix B Board Layout .................................................................................................B-1 Appendix C Keyboard Scan/Character Code[...]

  • Seite 13

    i Satellite/Satellite Pro/C650D/C655D Maintenance Manual Chapter 1 Hardware Overview[...]

  • Seite 14

    1 Hardware Overview ii Satellite/Satellite Pro/C650D/C 655D Maintenance Manual Chapter 1 Contents 1.1 Features .................................................................................................................. ............. 3 1.2 System Unit Components .................................................................................[...]

  • Seite 15

    0B1.1 Features 1 Hardware Overview Satellite/Satellite Pro/C650D/C655D Maintenance Manual 3 1.1 Features Toshiba Satellite C650D/C655D and Satellite Pro C650D/C655D is a full size notebook PC based on the mobile AMD Danube Processor, providing high-speed processing capabilities and advanced features. The computer employs a Lith ium Ion battery that[...]

  • Seite 16

    1 Hardware Overview 0B1.1 Features 4 Satellite/Satellite Pro/C650D/C 655D Maintenance Manual  Hard Disk Drive (HDD) The computer accomm odates 2.5-inch 9.5mm height Serial ATA HDD with following storage capacities: y 250 GB (9.5mm thick) SATA (5,400rpm ) y 320 GB (9.5mm thick) SATA (5,400rpm ) y 500 GB (9.5mm thick) SATA (5,400rpm )  ODD The [...]

  • Seite 17

    0B1.1 Features 1 Hardware Overview Satellite/Satellite Pro/C650D/C655D Maintenance Manual 5  Sound System CONEX CX20671 integrated audio controller supports multimedia. The sound system contains the following: y Stereo speakers y Headphone jack y Internal microphone y External microphone jack  Keyboard 30 kinds’ countries keyboard, which is[...]

  • Seite 18

    1 Hardware Overview 0B1.1 Features  Figures 1-1/1-2/1-3 and 1-4 show the com puter and its system unit configuration, respectively. Figure 1-1 ID Parts Description Placement 6 Satellite/Satellite Pro/C650D/C 655D Maintenance Manual[...]

  • Seite 19

    0B1.1 Features 1 Hardware Overview Figure 1-2 Computer Block Diagram Satellite/Satellite Pro/C650D/C655D Maintenance Manual 7[...]

  • Seite 20

    1 Hardware Overview 0B1.1 Features Figure 1-3 System Board Configurations 8 Satellite/Satellite Pro/C650D/C 655D Maintenance Manual[...]

  • Seite 21

    1B1.2 System Unit Components 1 Hardware Overview 1.2 System Unit Components Figure 1-4 is Block Diagram of the System Unit. Figure 1-4 System Unit Block Diagram Satellite/Satellite Pro/C650D/C655D Maintenance Manual 9[...]

  • Seite 22

    1 Hardware Overview 1B1.2 System Unit Components 10 Satellite/Satellite Pro/C650D/C 655D Maintenance Manual The system unit of the computer consists of the following com ponents:  Processor: Mobile AMD Danube Processor. y AMD AthlonII Dule Core Processor − Core Speed: 2.10 GHz − System Bus: 1600 MHz − On-Die Level 2 Cache: 512KB y AMD Semp[...]

  • Seite 23

    1B1.2 System Unit Components 1 Hardware Overview Satellite/Satellite Pro/C650D/C655D Maintenance Manual 11 y North Bridge: AMD RS880M − CPU Interface and Control − ATI Hyper Memory Support − PCI Express* Graphics (PEG) Interface − Integrated Display Interface Support − Internal Graphics Features − Direct Media Interface (DMI) − Power [...]

  • Seite 24

    1 Hardware Overview 1B1.2 System Unit Components 12 Satellite/Satellite Pro/C650D/C 655D Maintenance Manual y Integrated 2 WRMS (per channel) class- D stereo speaker am plifier with Spread Spectrum and 10-kV ESD withstand capability y Digital Microphone interface with internal MIC boost supporting up to two multiplexed digital element array microph[...]

  • Seite 25

    1B1.2 System Unit Components 1 Hardware Overview Satellite/Satellite Pro/C650D/C655D Maintenance Manual 13  Clock Generator y SB820M Internal Clock Generator − Generating the clock signal required for the system  LAN Controller y ATHEROS_AR8152 - 10/100Mbit − IEEE 802.3 10BASE-T/100BASE-TX compliant physical layer interface − IEEE 802.3[...]

  • Seite 26

    1 Hardware Overview 2B1.3 2.5-inch HDD 1.3 2.5-inch HDD The computer contains an extremely low-prof ile, lightweight and high-performance HDD. The HDD incorporates 9.5 mm height m agnetic disk and mini-Winchester type m agnetic heads. The HDD interface conforms to Serial ATA. Storage capacities supported are 250, 320 & 500 GB. The HDD is shown [...]

  • Seite 27

    3B1.4 DVD Super Multi (+-R Double Layer) 1 Hardware Overview 1.4 DVD Super Multi (+-R Double Layer) The DVD Super Multi drive accepts 12-cm (4.72-in ch) and 8-cm (3.15-inch) discs. At maximum , the drive can play back a DVD at 8x speed, read CD-ROM at 24x speed, and write CD-R at 24x speed, CD-RW at 4x speed, US CD-RW at 24x speed, High Speed CD-RW[...]

  • Seite 28

    1 Hardware Overview 4B1.5 Power Supply 16 Satellite/Satellite Pro/C650D/C 655D Maintenance Manual 1.5 Power Supply The power supply unit provides many different volta ges for the system board and perform s the following functions: 1. Power input monitor y Checks whether the DC power supply (AC adapter) is connected to the computer. y Checks whether[...]

  • Seite 29

    5B1.6 Batteries 1 Hardware Overview Satellite/Satellite Pro/C650D/C655D Maintenance Manual 17 1.6 Batteries The computer has the following 2 types of battery:  Main Battery Pack  Real Time Clock (RTC) Battery Table 1-3 lists the specifications of these batteries. Table 1-3 Battery Specifications Battery Type Material Output voltage Capacity M[...]

  • Seite 30

    1 Hardware Overview 5B1.6 Batteries 18 Satellite/Satellite Pro/C650D/C 655D Maintenance Manual State Charge Time Off-State Charge 3/6 Cell About 4 hours max On-State Charge 3/6 Cell About 4~10 hours max NOTE: The time required for normal charge depends on the power consumption by the system. Using the fluorescent lamp and frequently accessing the d[...]

  • Seite 31

    2 T r oubleshooting Satellite/Satellite Pro/C650D/C655D Maintenance Manual 2-i 2 概要 Chapter 2 T roubleshooting[...]

  • Seite 32

    2 T r oubleshooting 2-ii Satellite/Satellite Pro/C650D/C655D Maintenance Manual Chapter 2 Contents 2.1 Outline ................................................................................................................... . 2-1 2.2 Basic Flowchart .................................................................................................[...]

  • Seite 33

    2 T r oubleshooting Satellite/Satellite Pro/C650D/C655D Maintenance Manual 2-iii 2.10 Audio T est ............................................................................................................. 2 -20 Procedure 1 T est Program Check .................................................................. 2-20 Procedure 2 Connector Check and [...]

  • Seite 34

    [...]

  • Seite 35

    2.1 Outline 2 T roubleshooting 2-1 Satellite/Satellite Pro/C650D/C655D Maintenance Manual 2.1 Outline This chapter describes the fault diagnosis proce dures for field replaceable units (FRUs) in the computer . The FRUs covered here are as follows: 1. System board 2. HDD 3. Keyboard 4. Display 5. ODD drive 6. LAN 7. Speaker 8. Cooling module See Cha[...]

  • Seite 36

    2 T roubleshooting 2.2 Basic Flowchart Satellite/Satellite Pro/C650D/C655D Maintenance Manual 2-2 2.2 Basic Flowchart The basic flowchart in Figure 2-1 serves as a guide for identifying a possibly faulty FRU. Before going through the diagnostic flow chart steps, verify the following:  Ask the user if a password has been regist ered and, if so, a[...]

  • Seite 37

    2.2 Basic Flowchart 2 T roubleshooting Connect the AC Adapter BA TTER Y LED / DC IN LED on ?? T urn the power on. Any error message displayed ?? Follow the power supply diagnostic Procedure in Section 2.3 Follow the system board diagnostic Procedure in Section 2.4 Follow the display diagnostic Procedure in Section 2.7 "Password=" displaye[...]

  • Seite 38

    2 T roubleshooting 2.2 Basic Flowchart Satellite/Satellite Pro/C650D/C655D Maintenance Manual 2-4 Figur e 2-1 Basic Flowchart (2/2) Keyboard works well ?? Follow the keyboard diagnostic procedure in Section 2.6 1 N o Diagnostic Program Loaded?? Perform each test with the diagnostic program. Any error detected by the diagnostic program ?? Perform th[...]

  • Seite 39

    2.2 Basic Flowchart 2 T roubleshooting 2-5 Satellite/Satellite Pro/C650D/C655D Maintenance Manual If the diagnostic program cannot detect an er ror , the error m ay be intermittent. Run the continuous test program repeatedly to isolate th e problem. Check the log utilities function to confirm which diagnostic test detected the erro r , then perform[...]

  • Seite 40

    2 T roubleshooting 2.3 Power Supply 2.3 Power Supply The power supply in the computer controls ma ny functions and com ponents. T o check if the power supply is defective or malfunctioning, foll ow the troubleshooting procedures below as instructed. Procedure 1 Power Icon Check Procedure 2 Connection Check Procedure 3 Replacement Check Procedure 1 [...]

  • Seite 41

    2.3 Power Supply 2 T r oubleshooting Procedure 2 Connection Check Power is supplied to the system board as illustrated below: AC adaptor System board AC power cord AC adaptor cord Battery pack Follow the steps below to check whether each connector has been connected correctly: Check 1 Make sur e the AC adaptor and AC power cord have been firmly plu[...]

  • Seite 42

    2 T r oubleshooting 2.4 System Board Satellite/Satellite Pro/C650D/C655D Maintenance Manual 2-8 2.4 System Board T o check if the system board is defectiv e or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Message Check Procedure 2 T est Program Check Procedure 3 Replacement Check Procedure 1 Message Check W[...]

  • Seite 43

    2.4 System Board 2 T roubleshooting 2-9 Satellite/Satellite Pro/C650D/C655D Maintenance Manual Procedure 2 T est Program Check The maintenance test program contains severa l programs for diagnosing the system board and CPU. Execute the following test programs us ing the procedures described in Chapter 3. 1. System test 2. Memory test 3. Keyboard te[...]

  • Seite 44

    2 T r oubleshooting 2.5 HDD Satellite/Satellite Pro/C650D/C655D Maintenance Manual 2-10 2.5 HDD T o check if the 9.5mm HDD is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Message Check Procedure 2 Partition Check Procedure 3 Format Check Procedure 4 T est Program Check Procedure 5 Connector Ch [...]

  • Seite 45

    2.5 HDD 2 T r oubleshooting 2-1 1 Satellite/Satellite Pro/C650D/C655D Maintenance Manual partition on drive C. Then r estart th e computer .. If the p r oblem persists, go to Procedur e 3. Check 3 If drive C is listed as active in the FDISK menu, perform Check 4. If drive C is not listed as active, re turn to the FDISK menu and choose the option to[...]

  • Seite 46

    2 T r oubleshooting 2.5 HDD T able 2- 1 HDD Err or Code and S tatus Code S tatus 1 Get Parameter Fail ! 2 Read Old Data Error W rite Pattern Erro r 3 4 Read Back Data Error 5 Data Compare Error Restore Data Erro r 6 7 Read V erify Error 9 Seek Error 10 Disk Controller Self T est Failed 11 Disk Controller T est unexpected interrupt Faile d 12 Disk C[...]

  • Seite 47

    2.5 HDD 2 T r oubleshooting Procedure 5 Connector Check and Replacement Check The HDD, system board or CPU may be faulty . Disassemble the com puter following the steps described in Chapter 4 and perform the following checks: Check 1 Make sure the follow ing connectors have been firmly connected to the HDD, system board and CPU. HDD System board CP[...]

  • Seite 48

    2 T roubleshooting 2.6 Keyboard 2.6 Keyboard T o check if the computer ’ s keyboard is def ective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 T est Program Check Procedure 2 Connector Ch eck and Replacement Check Procedure 1 T est Program Check Execute the Keyboard test availabl e as part of the maint[...]

  • Seite 49

    2.7 Display 2 T roubleshooting 2.7 Display T o check if the computer ’ s display is def ective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 External Monitor Check Procedure 2 T est Program Check Procedure 3 Connector Ch eck and Replacement Check Procedure 1 External Monitor Check Connect an external mo[...]

  • Seite 50

    2 T r oubleshooting 2.7 Display If there is st ill an erro r , perform Check 4. Check 4 The FL inverter board may be fau lty . Replace it with a new one and return to Procedur e 3. If ther e is still an err or , perform Check 5. Check 5 Make sure the LCD/FL cable has b een firmly connected to the system board and LCD module. FL inverter board Syste[...]

  • Seite 51

    2.8 ODD (Optical Disk Drive) 2 T roubleshooting 2.8 ODD (Optical Disk Drive) T o check if the internal ODD drive is defec tive or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 ODD Cleaning Check Procedure 2 T est Program Check Procedure 3 Connector Check and Replacement Check Procedure 1 ODD Cleaning Check 1[...]

  • Seite 52

    2 T roubleshooting 2.8 ODD (Optical Disk Drive) Satellite/Satellite Pro/C650D/C655D Maintenance Manual 2-18 Check 3 The ODD drive may be faulty . Replace the ODD drive with a new one following the steps in Chapter 4. If the ODD drive is still not functioning properly , perform Check 4. Check 4 The system board may be faulty . Repla ce i t with new [...]

  • Seite 53

    2.9 LAN 2 T roubleshooting 2-19 Satellite/Sa tellite Pro/C650D/C655D Maintenance Manual 2.9 LAN T o check if the computer ’ s LAN is defec tive or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 T est Program Check Procedure 2 Connector Ch eck and Replacement Check Procedure 1 T est Program Check Execute the[...]

  • Seite 54

    2 T r oubleshooting 2.10Audio T est 2.10 Audio T est T o check if the computer ’ s Speaker is def ective or malfunctioning, fo llow the troubleshooting procedures below as instructed. Procedure 1 T est Program Check Procedure 2 Connector Ch eck and Replacement Check Procedure 1 T est Program Check Execute the Audio test available as part of the m[...]

  • Seite 55

    2.1 1 1 1BCooling Module 2 T roubleshooting 2.11 Cooling Module T o check if the computer ’ s cooling module is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 T est Program Check Procedure 2 Connector Check and Replacement Check Procedure 1 T est Program Check Execute the Fan On/off test progra[...]

  • Seite 56

    Chapter 3 Diagnostic Programs[...]

  • Seite 57

    3 Diagnostic Programs ii Satellite/Satellite Pro/C6 50D/C655D Maintenance Manual Chapter 3 Contents 3.1 General .......................................................................................................................... 1 3.2 Quick Start .................................................................................................[...]

  • Seite 58

    3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual iii 3.9 Communication (COMM) .......................................................................................... 52 3.10 Peripheral .................................................................................................................... 53 3.11 Error Cod[...]

  • Seite 59

    [...]

  • Seite 60

    3.1 General 3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual 1 3.1 General This chapter explains the dia gnostic programs which tests and di agnoses the functions of the hardware components of this computer. The di agnostic programs can be classified into two types: OPTION and DIAGNOSTIC TEST. NOTE 1: This Diagnostic sup[...]

  • Seite 61

    3 Diagnostic Programs 3.1 General 2 Satellite/Satellite Pro/C650D/C655D Maintenance Manual Before running the diagnostic programs, get the following tools prepared:  A Service Diagnostic BOOT CD or USB Flash Memory  A Formatted FLOPPY DISK  A Test Media CD (A-BEX TEST CD-R OM TCDR-702)(for CD-ROM test)  A Test Media DVD (Toshiba-EMI DVD[...]

  • Seite 62

    3.2 Quick Start 3 Diagnostic Programs 3.2 Quick Start When the system is booting from Service Diagnostic CD or USB Flash Mem ory, the following screen will be displayed: Please select a test item or select 0 to exit to Free -DOS: 3.2.1 Quick Test When this item is selected, the syste m will run the configured test item s and genera te a test report[...]

  • Seite 63

    3 Diagnostic Programs 3.2 Quick Start 1. Use arrow key to select ‘TouchPad’ item on ‘Peripheral’ in the m enu, then press Space key to select it. (When it is being selected, there is a X m arked in the [ ] ) Select ‘Test Mouse’ or press F8 to run the test. The prompt inform ation would be displayed in the screen as below. This test item[...]

  • Seite 64

    3.2 Quick Start 3 Diagnostic Programs Here is another method to run the test: Highl ight a test item by us ing arrow keys, then, press Enter to start. If there are parameters pr ovided, user should set para meters in the parameter dialog window. CPU Speed Test (Step by Step): 1. Select test item: Select System — CPU — CPU Speed , then, press th[...]

  • Seite 65

    3 Diagnostic Programs 3.2 Quick Start 3. Test Result System will automatically run and display the tes t result as follows: Following is the comparison report of the two testing methods m entioned above: 1) Configuration and Running As to the method used in Mouse test, the user is required to select test items by pressing Space key and set the para[...]

  • Seite 66

    3.2 Quick Start 3 Diagnostic Programs As to the method adopted in CPU Speed test , user should highlight the test item and press Enter to start testing. And the user has to setup the parameters every time before running the test. Using this method, only one test item would be tested at one time. 3.2.3 Keyboard Layout test The test purpose is to che[...]

  • Seite 67

    3 Diagnostic Programs 3.2 Quick Start It requires user to press the key and ch eck whether the key in the screen changes color or not. User can terminate test by typing ‘ END ’. When testing the ‘ Fn ’ key, it must press the ‘ ESC ’ key at the same time. When the user has checked all the keys and all the keys in the screen have changed [...]

  • Seite 68

    3.2 Quick Start 3 Diagnostic Programs NOTE 1: This test only for internal microphone! If the machine doesn't have camera m odule, then it doesn't have internal microphone. This test result will fa il due to no internal microphone. 3.2.6 DMI Read Read the information from the syste m’s SMBIOS and display it in the screen as f o llows: Us[...]

  • Seite 69

    3 Diagnostic Programs 3.2 Quick Start In this screen, there are two lines which attribute could be edited and updated. The 1 st line (the font in yellow with blue background) shows the attribute’s value that is read from the current system and the 2 nd line (the font in red with turquoise background) shows the same value as that in the 1 st line [...]

  • Seite 70

    3.2 Quick Start 3 Diagnostic Programs The attributes that have been modified woul d be marked in red; otherwise in yellow. User could press F2 to save the changes, or press F4 to ignore and exit the current program. 3.2.8 System Information This function is used to read the system in formation. When the test is completed, a file named System.log wi[...]

  • Seite 71

    3 Diagnostic Programs 3.2 Quick Start User can use function keys listed on the bottom of the screen to display the configuration of the component or exit the current pr ogram. On the left column, the components information is listed and us er can use arrow keys or PgUp/PgDn to view the list and highlight the chosen component. On the right column, t[...]

  • Seite 72

    3.2 Quick Start 3 Diagnostic Programs 3.2.10 Exit to Free DOS Select this item to exit to Free DOS. 3.2.11 The Diagnostics Screen Explanation Below is an example of running a test item. It includes the following parts: Diagnostics Windows, Test Status Area, Progress Bar, Erro r L ist, Test Item’s Title, Status Bar and Message Box. 1. Diagnostics [...]

  • Seite 73

    3 Diagnostic Programs 3.2 Quick Start  Test status and result are disp layed in the upper right corner of the screen. It displays the test status of the current test item – TEST (in testing), PASS (test finished and its result is passed), FAIL (test finished and its re sult is failed) and SKIP (test skipp ed).  The error list of each test m[...]

  • Seite 74

    3.2 Quick Start 3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual 15 The status bar is used to indicate the current sc ript setting and test stat us. It consists of two lines that includes the information as f ollows:  Test Mode : TIMEBOUND or LOOPBOUND, e.g. LOOPBOUND in the above screen;  Script File Name : Script[...]

  • Seite 75

    3 Diagnostic Programs 3.3Option 3.3 Options 3.3.1 Overview In Service Diagnostics, with the Options menu user can configure the batch parameters, test item’s param eters and t hose parameters created by the LOG file. Options Menu Notes: • Select All/None Items Switch between selecting a ll test items and selecting none. T he hot key is F6 . •[...]

  • Seite 76

    3.3 Option 3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual 17 • Edit Batch Parameters Configure batch parameters and a ll the test item’s param eters . • Load Batch Parameters Upload all the test items and the param eters to the *.ini file. • Save Batch Parameters Save all the parameters and the test item s that[...]

  • Seite 77

    3 Diagnostic Programs 3.3Option • Test Order Specify the order of the test items. C hoose 'Sequence' to adopt the sequential mode; choose 'Random' to run the test items in random sequence. • Test Options Choose one of the following options: 9 Wait On Error Wait for further confirmation while an error occurs. 9 Break On Error[...]

  • Seite 78

    3.3 Option 3 Diagnostic Programs Monitor the remaining ba ttery capacity (percent). 9 Monitor CPU Thermal Monitor the CPU temperature. • Test Mode 9 LOOPBOUND The chosen test items will run repeated ly accord ing to the times specified in the 'Number of Loops'. 9 TIMEBOUND The chosen test items will run for an exte nt tim e specified in[...]

  • Seite 79

    3 Diagnostic Programs 3.3Option Repeat times of the test item. • Interactive If the item is enabled during the test, the te s t items that need user to response can run normally, such as PS2 Mouse te st; If it is disabled, those test item s will report FAIL. Whether the option here is enabled, it only affects the current test item. • Parameters[...]

  • Seite 80

    3.3 Option 3 Diagnostic Programs In this window, you can specify the .INI files that you wanted to be edited or modified. 3.3.5 Save Batch Parameters Here you can save the edited or modified content to the batch parameters files. 3.3.6 LOG Parameters Setting You can access the Log Parameters screen through Service DiagnosticsOptions - Generate Rep[...]

  • Seite 81

    3 Diagnostic Programs 3.3Option • Report Destination If selecting 'NONE', no log file will be generated; if selecting 'FILE' , a log file with the name specified in 'Log File Name' will be generated. • Log Options 9 Log Errors If selecting this parameter, errors will be record ed when the test fails. 9 Log Test Act[...]

  • Seite 82

    3.3 Option 3 Diagnostic Programs 9 Log Device Info on Fail If selecting this parameter, deta ils of the failed test will be recorded. • Log file Name Specify the Log file name. You can input the detail p ath of th e file. System will show the detail path of the file. 3.3.7 Specify LOG Viewer You can specify the Log file viewer in the Specify Log [...]

  • Seite 83

    3 Diagnostic Programs 3.3Option In this screen, you can specify a Log file and view it with the viewer designated in Specify LOG Viewer. 3.3.9 LOG Viewer Service Diagnostic Log viewer: • ↑ , ↓ Scroll a line backward or forward on the screen. • Page Up, Page Down Scroll a page backward or forward on the screen. • Esc Exit the Log viewer. ?[...]

  • Seite 84

    3.3 Option 3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual 25 Prompt the search dialogue for the user to input the string to be looked for and specify the searching method. • F3 Find the next correspond ing strings given. 3.3.10 LOG File Sample Log file is a test result file, which record s the following information: [...]

  • Seite 85

    3 Diagnostic Programs 3.3Option 26 Satellite/Satellite Pro/C650D/C655D Maintenance Manual ITEM TEST FAIL Function ID :502 Error Code :50202 Error Message :Touch Pad Test Fail End Time: Wed Jul 05 10:49:16 2006[...]

  • Seite 86

    3.4 Subtests 3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual 27 3.4 Subtests Test Group Sub Item ID Subtest Test ID Test items Internal Name System 01 CPU 01 Basic Functionality Test [CPUBasicFun] 02 CPU Speed [CPUSpeed] 03 Coprocessor NPU Basic Functions Coprocessor [NPUFun ] 04 CPU Information [CPUInformation] 05 CPU [...]

  • Seite 87

    3 Diagnostic Programs 3.4 Subtests 28 Satellite/Satellite Pro/C650D/C655D Maintenance Manual 10 Data Bus Test [DataBus] 11 Bus Noise [BusNoise ] 12 Memory Speed Test [MemSpeed] Storage 01 HDD 01 Sequential/Random R/W [SeqRdRW1] 02 Sequential/Random Seek [Seek1] 03 Performance [Perform1] 04 Controller Check [Controller1] 05 Diagnostic Read/Write [Di[...]

  • Seite 88

    3.4 Subtests 3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual 29 VESA 1024x768x32 K Mode VESA 1024 x 768 x 16 K Mode VESA 1024 x 768 x32bit Mode [V1024768_32] 04 VESA Video Memory [VESAMEM] 05 AGP Test [AGP] 06 LCD Panel Test [LCDPanel] 07 Register Test [Register] 08 Color Purity Test [ColPurity] 09 Direct Color Test [Di[...]

  • Seite 89

    3 Diagnostic Programs 3.5 System Test 3.5 System Test Move arrow keys and press the Space key to select CPU test item from Service Diagnostic menu, then highlight CPU and press the Enter to run this test item. Subtest 01 CPU 1. Basic Functionality Test This test item is to check whether the CPU works normally through math and logic calculation, whi[...]

  • Seite 90

    3.5 System Test 3 Diagnostic Programs CPU Speed Comparison --Whether you want to make a comparison of the CPU speed with the value set in ‘E xpected CPU Speed’, you should choose ‘Yes’; otherwise, ‘No’. Expected CPU Speed --Specify the expected CPU Speed value you want for further comparison. Allowable Error Rate -- Specify the Allowabl[...]

  • Seite 91

    3 Diagnostic Programs 3.5 System Test 5. CPU Protected Mode Test This test item is to check whether CPU protected m ode instruction works normally. 6. MMX The test item is to confirm whether the CPU supports MMX instru ctions. Subtest 02 Boards 1. DMA Controller This test item is to check whethe r the DMA controller works norm ally. 2. Interval Tim[...]

  • Seite 92

    3.5 System Test 3 Diagnostic Programs 5. Plug and Play This test item is to check: 1. Whether the current system supports Plug-n-Play; 2. Whether there is an ESCD (Extended System Configuration D ata) in the BIOS; 3. Whether there is PCI-to-ISA bridge in the system; 4. Whether there is PCI bus in the sy stem. 6. ACPI Test ACPI test includes two sub[...]

  • Seite 93

    3 Diagnostic Programs 3.5 System Test 34 Satellite/Satellite Pro/C650D/C655D Maintenance Manual[...]

  • Seite 94

    3.6 Memory Test 3 Diagnostic Programs 3.6 Memory Test This test module is to check whet her the m em ory chip works normally. Subtest 01 BIOS ROM This test item is to check the validity of BIOS ROM that in cludes two sub-items -- ROM Read and ROM Write Protection. RO M Read is to check whether BIOS ROM could be correctly read out, ROM Wr ite Protec[...]

  • Seite 95

    3 Diagnostic Programs 3.6 Memory Test 36 Satellite/Satellite Pro/C650D/C655D Maintenance Manual test coverage would be based on the setting and the value in ‘Percent (%) mentioned at below. Pattern Size: Choose the pattern size – BY TE, WORD, DWORD or ALL. Percent (%): Choose the percentage of the defined range of the m emory to be tested. Time[...]

  • Seite 96

    3.6 Memory Test 3 Diagnostic Programs In addition to the above pattern test of th e memory, there is Read/Write Cycle test and Read Cycle Test for the extended memory. Below is the parameter dialog window of the extended pattern test. Test Range: Specify the test coverage range of Extended Memory. If user chooses Total Size, it means that the whole[...]

  • Seite 97

    3 Diagnostic Programs 3.6 Memory Test 2. Read Cycle Test Test by using read instructions. Subtest 04 Walking 1’s Test The test item is to ensure that there is no short circuitry issue in mem ory chip. The parameter dialog window is the same as that in ‘Subtest 02 P attern’. Subtest 05 Walking 0’s Test The test item is to ensure that there i[...]

  • Seite 98

    3.6 Memory Test 3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual 39 2. Random Increment Read/W rite This test item is to check whether the memory could be correctly accessed with randomized memory address an d a series of incremental data. Subtest 10 Data Bus Test This test item is to check whether the data bus works nor[...]

  • Seite 99

    3 Diagnostic Programs 3.7 Storage 3.7 Storage Subtest 01 HDD This test item runs on IDE hard disks. It checks the functions and performance of IDE hard disk. In order to protect user’s HDD data, the password must be verified before the HDD test. The screen is as follows: Password : hard disk 1. Sequential/Random R/W This test item is to check t[...]

  • Seite 100

    3.7 Storage 3 Diagnostic Programs invalid. If user chooses Special Size, the test of IDE HDD will be taken according to the coverage range that user chooses or tim e. e Block Address). the coverage rate in percentage of the total disk. l ined range of the total disk to be tested. ode —Choose test mode from the following options: e disk, then read[...]

  • Seite 101

    3 Diagnostic Programs 3.7 Storage IDE HDD Test Range —is same as the description of the upper item. LBA Start, LBA End -- specify start and finish byte in LBA(Large Block Time Limit(h): Choose or Input the time (hour) of the defined range of the total Time Limit(m): Choose or Input the time (minute) of the defined range of the tested. 3. seeking [...]

  • Seite 102

    3.7 Storage 3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual 43 6. gy. SMART test will compare the attribute va lues with the thr esh old value in the controller to confirm whether there is any failure in the HDD Subtes The ODD test runs on ID E CDROM/DVD-ROM & CD-RW. It will check the ODD y and performance. 1. ontro[...]

  • Seite 103

    3 Diagnostic Programs 3.8 Video 3.8 Video This test item tests the video by: 1. displaying the figures in different graphic modes. 2. displaying the property and color of the characters in different text modes. User will confirm whether each video m ode works normally by judging whether the display is correct. It checks whether the video m emory wo[...]

  • Seite 104

    3.8 Video 3 Diagnostic Programs It would display the below texts of th e different attribut es in the screen: 1. Text in normal attribute; 2. Text in blinking normal attribute; 3. Text in inverse attribute; 4. Text in blinking inverse attribute; 5. Text in hi-intensity attribute; 6. Text in blinking hi-i ntensity attribute; Users need to check whet[...]

  • Seite 105

    3 Diagnostic Programs 3.8 Video 4. Text Color This test item is to check whether all 16 colors foreground and all 8 colors background works normally in VGA text mode. The bit4-6 of the attribute byte of a ch aracter defines 8 background colors (black, blue, green, cyan, red, brown, magenta, and light gray), and the bit0-3 defines 16 foreground colo[...]

  • Seite 106

    3.8 Video 3 Diagnostic Programs This test item is to check whether 80*25 Text Mode works normally. In the test, user is required to respond according to the instru ction in the screen. Subtest 02 640 * 480 VGA Mode This test item is to check whethe r 680*480 VGA Text mode works normally. In the test, user is required to respond according to the ins[...]

  • Seite 107

    3 Diagnostic Programs 3.8 Video Subtest 03 VESA Video Modes This test item is to check whether all the video modes supported by the video card works normally. In the test, user is required to respon d following the instruction in the screen. 1. 640X480 Video Modes Test 2. 800X600 Video Modes Test 3. 1024X768 Video Modes Test Subtest 04 VESA Video M[...]

  • Seite 108

    3.8 Video 3 Diagnostic Programs If press Ctrl+Break to force the test to term inate during execution of VESA Video Memory, the test program will not operate and display properly in f urther tests. Subtest 05 AGP Test This test item is to report the system’s Accelerated Graphics Port status and check whether AGP registers works normally. Subtest 0[...]

  • Seite 109

    3 Diagnostic Programs 3.8 Video Subtest 07 Register Test This test item is to check whether th e registers of the video adapter works normally. Subtest 08 Color Purity Test This test item is to check whether th e sy stem (the video adapter and the display) could display the purity color of re d, green, blue, black and white. In the test, user is re[...]

  • Seite 110

    3.8 Video 3 Diagnostic Programs Subtest 10 DAC/Palette Address This test item is to check the f unction of DAC registers and Palette registers. In the test, user is required to respond according to the instru ction in the screen. Satellite/Satellite Pro/C650D/C655D Maintenance Manual 51[...]

  • Seite 111

    3 Diagnostic Programs 3.9 Communication (COMM) 52 Satellite/Satellite Pro/C650D/C655D Maintenance Manual 3.9 Communication (COMM) Subtest 01 LAN Card This test item is to check whether the m odule can detect the exis tence of the network card and display its related information. 1. Device ID Detection Detect the device ID of the network card. 2. Ve[...]

  • Seite 112

    3.10 Peripheral 3 Diagnostic Programs 3.10 Peripheral Subtest 01 Keyboard This test item is to check whether the keyboard works normally. 1. Keyboard Data Line Test Check whether the keyboard data line works norm ally. 2. Keyboard Clock Line Test Check whether the keyboard clock line works normally. Subtest 02 Mouse Test Check whether the point dev[...]

  • Seite 113

    3 Diagnostic Programs 3.10 Peripheral Subtest 03 Led Test 1. Led Test Check whether the green led works normally. 54 Satellite/Satellite Pro/C650D/C655D Maintenance Manual[...]

  • Seite 114

    3.10 Peripheral 3 Diagnostic Programs Check whether the orange led works normally. Satellite/Satellite Pro/C650D/C655D Maintenance Manual 55[...]

  • Seite 115

    3 Diagnostic Programs 3.11Error Codes and Description 56 Satellite/Satellite Pro/C650D/C655D Maintenance Manual 3.11 Error Codes and description The format of ‘Error Code’ is ‘ddxxee ’, and ‘dd’ is the device ID (1 ~2 chars), ‘xx’ is test function ID of device (2 chars), ‘ee’ is th e error code of device (2 chars); th e range of[...]

  • Seite 116

    3.11Error Codes and Description 3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual 57 04 (XMS)Memory Problem The test pattern read out from the extension memory is different from the one that has been written in this address. As above. 05 (XMS) Out Of Range Wrong parameters se tup. Check and reset the parameters. 06 Addres[...]

  • Seite 117

    3 Diagnostic Programs 3.11Error Codes and Description 58 Satellite/Satellite Pro/C650D/C655D Maintenance Manual configuration. 17 PCI to ISA Bridge Error PCI-ISA bridge errors. Repeat multiple times. If t h ere is always the same error, replace the board. 18 ESCD Error ESCD errors. As above. 53 ACPI Table Test Error Errors with the ACPI table test.[...]

  • Seite 118

    3.11Error Codes and Description 3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual 59 15 VESA VRAM Test Error Physical problems with the video card or the monitor. Check whether there is any physical problem with the video card or the monitor. 16 AGP Test Error AGP configuration register errors. Check and see whether the A[...]

  • Seite 119

    3 Diagnostic Programs 3.11Error Codes and Description 60 Satellite/Satellite Pro/C650D/C655D Maintenance Manual 01 Keyboard Map & Stroke Test Fail Keyboard Map & Stroke Test fails. Check the KBD connection and repeat the test. 03 Clock Line Test Fail Clock Line Test fails. As above. 04 Data Line Test Fail Data Line Test fails. As above. 05x[...]

  • Seite 120

    3.11Error Codes and Description 3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual 61[...]

  • Seite 121

    [...]

  • Seite 122

    3.12 Quick Test Item List 3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual i 3.12 Quick Test Item List Device Test Items Comment CPU Basic Functionality N PU Basic Functions CPU Information Memory BIOS ROM Cache Memory Bit Stuck High Test 10% or 3 minutes Bit Stuck Low Test 10% or 3 minutes Address Test Board Interval Ti[...]

  • Seite 123

    Chapter 4 Replacement Procedures 4 1[...]

  • Seite 124

    4 Replacement Procedures 4-ii Satellite/Satellite Pro/C650D/C655D Maintenance Manual[...]

  • Seite 125

    4 Replacement Procedure s Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4-1 Chapter 4 Contents 4.1 General .................................................................. Fehler! Textmarke nicht definiert. Safety Precautions ........................................... Fehler! Textmarke nicht definiert. Safety Precautions ...............[...]

  • Seite 126

    4 Replacement Procedures 4-2 Satellite/Satellite Pro/C650D/C655D Maintenance Manual Assembling the ODD Drive ............................ Fehler! Textmarke nicht definiert. 4.6 Keyboard and RTC battery ................................... Fehler! Textmarke nicht definiert. Removing Keyboard and RTC battery ........... Fehler! Textmarke nicht definie[...]

  • Seite 127

    4 Replacement Procedure s Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4-3 Removing the LED module ............................ Fehler! Textmarke nicht definiert. Installing the LED Module ............................. Fehler! Textmarke nicht definiert. 4.17 CCD Board and MIC ............................................ Fehler! Textmarke [...]

  • Seite 128

    4 Replacement Procedures 4-4 Satellite/Satellite Pro/C650D/C655D Maintenance Manual Figures Figure4-1 Removing the battery pack .................................................................................. 4-8 Figure 4-2 Removing the PC card ....................................................................................... 4-10 Figure 4-3[...]

  • Seite 129

    4 Replacement Procedure s Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4-5 Figure 4-28 Removing the LCD module and screw ............................................................ 4-43 Figure 4-29 Removing the LCD module ............................................................................. 4- 43 Figure 4-30 Removing CCD board an[...]

  • Seite 130

    4.1 General 4 Replacement Procedures 4 1 4.1 General This chapter explains how to disassemble the computer and replace Field Replaceable Units (FRUs). Some replacement procedures m ay not require you to remove all the surrounding FRUs to replace only one FRU. The chart below shows the FRUs in the order in which they should be removed in a top-down [...]

  • Seite 131

    4 Replacement Procedures 4.1 General 4-2 Satellite/Satellite Pro/C650D/C655D Maintenance Manual Safety Precautions Before you begin to disassembly read the following safety precautions carefully. Be sure to follow them while you are working. DANGER: 1. Always use the genuine batteries or replacement batteries authorized by Toshiba. Batteries other [...]

  • Seite 132

    4.1 General 4 Replacement Procedures Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4-3 CAUTION: 1. Before replacing a component, make su re that the replacement component meets the required specifications. To avoid computer failures, never use components that do not meet the specifications. 2. To avoid internal damage such as short circuit[...]

  • Seite 133

    4 Replacement Procedures 4.1 General 4-4 Satellite/Satellite Pro/C650D/C655D Maintenance Manual Before You Begin Before you begin to disassembly the computer, keep in m ind the precautions and advice in this section. Always begin disassembly by removing the AC adapter and battery pack. Remove the optional parts and accessories as well. The procedur[...]

  • Seite 134

    4.1 General 4 Replacement Procedures Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4-5 Disassembly Procedures The cable connectors come in these two basic types:  Pressure plate connectors  Normal pin connectors To remove a pressure plate connector, pull up the tabs on either side of the connector's plastic pressure plate and ge[...]

  • Seite 135

    4 Replacement Procedures 4.1 General 4-6 Satellite/Satellite Pro/C650D/C655D Maintenance Manual Tools and Equipment For your safety and that of other people in the working environment, it is strongly recommended that you use electrostatic discharge (ESD) equipm ent. The proper use of this equipment will ensure successful repair work and reduce the [...]

  • Seite 136

    4.1 General 4 Replacement Procedures Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4-7 Colors of Screw Shanks For easy identification of the correct screws, the screw shanks are colored according to their lengths, as follows:  Screws of an even-numbered length Brown  Screws of an odd-numbered length White  Screws of a special leng[...]

  • Seite 137

    4 Replacement Procedures 4.2 Battery Pack/Bridge Media 4.2 Battery Pack/Bridge Media 4.2.1 Battery Pack Removing the Battery Pack Remove the battery pack according to the following procedures and Figure 4-1. CAUTION: When handling the battery packs, use care not to short circuit the terminals. Do not drop, hit, twist, or bend the battery packs. Do [...]

  • Seite 138

    4.2 Battery Pack/Bridge Media 4 Replacement Procedures Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4-9 Installing the Battery Pack Install the battery pack according to the following procedures and Figure 4-1. CAUTION: The battery packs contain a lithium ion battery, which can explode due to improper replacement, use, handling, or dispos[...]

  • Seite 139

    4 Replacement Procedures 4.2 Battery Pack/Bridge Media 4.2.2 Bridge Media Removing the Bridge Media Remove the Bridge Media according to the following procedures and Figure 4-2, after checking that the computer is turned off in boot mode. 1. Push a Bridge media. It will pop out partly when you release, so pull out the Bridge media. Memory card Figu[...]

  • Seite 140

    4.3 MDC Module 4 Replacement Procedures 4.3 Memory Module Removing the Memory Module Remove the mem ory module according to the following procedures and Figures 4-3, after checking that the computer is turned off in boot mode. CAUTION: Remove the optional memory after turning off the computer. If this is violated, the computer or memory can be dama[...]

  • Seite 141

    4 Replacement Procedures 4.3 MDC Module 4-12 Satellite/Satellite Pro/C650D/C655D Maintenance Manual Installing the Memory Module Install the memory m odule according to the following procedures and Figures 4-3, after checking that the computer is turned off in boot mode. CAUTION: Install the optional memory afte r turning off the computer. If this [...]

  • Seite 142

    4.4 HDD 4 Replacement Procedures 4.4 HDD Removing the HDD CAUTION: Do not press on the top or bottom of the drive. Applying such pressure can either corrupt the data in the drive or damage the drive. Remove the HDD (hard disk drive) according to the following procedures and Figures 4-4, 4- 5. 1. Release the one HDD cover screw securing the HDD cove[...]

  • Seite 143

    4 Replacement Procedures 4.4 HDD HDD pack M2 5x3 black flat head screw . HDD cover Figure 4-4 Removing the HDD pack NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or replace the HDD pack only if it fails. 4. Place the HDD pack on a flat surface (such as a desk), and remove the four M2x2 black flat head screws. 5. Pla[...]

  • Seite 144

    4.4 HDD 4 Replacement Procedures HDD chassis HDD M2x2 black flat head screw M2x2 black flat head screw Figure 4-5 Removing the HDD chassis CAUTION: Do not apply pressure to the top or bottom of the drive. Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4-15[...]

  • Seite 145

    4 Replacement Procedures 4.4 HDD 4-16 Satellite/Satellite Pro/C650D/C655D Maintenance Manual Installing the HDD Install the HDD according to the following procedures and Figures 4-4, 4-5. CAUTION: To avoid damage, always hold the HDD only by its sides. 1. Attach the HDD chassis. 2. Secure the HDD and its chassis with the four M2.5x2 black flat head[...]

  • Seite 146

    4.5 ODD Bay Module 4 Replacement Procedures 4.5 ODD Bay Module Removing the ODD Bay Module NOTE: The installation and removal procedures are the same for all the modules that can be installed in the ODD bay. See the appropriate sections for the disassembly procedures of specific modules. Remove the ODD bay module according to the following procedur[...]

  • Seite 147

    4 Replacement Procedures 4.5 ODD Bay Module 4-18 Satellite/Satellite Pro/C650D/C655D Maintenance Manual Installing the ODD Bay Module Install the ODD bay module according to the following procedures and Figures 4-6. 1. Place the ODD bay module in the correct position and slide it in. 2. Push it in until it clicks into place. 3. Secure the ODD bay m[...]

  • Seite 148

    4.5 ODD Bay Module 4 Replacement Procedures Disassembling the ODD Drive NOTE: Do not disassemble the ODD drive when it is working normally. Disassemble or replace the ODD drive only if it fails. Disassemble the ODD drive according to the following procedures and Figure 4-7. 1. Remove two M2x3 black flat head screws. 2. Remove the bracket. M2x3 blac[...]

  • Seite 149

    4 Replacement Procedures 4.6 Keyboard 4.6 Key board and RTC battery Removing Keyboard and RTC battery Remove the Keyboard and RTC battery according to the following procedures and Figure 4- 8. 1. Release the following 13 latches on the keyboard cover, in that order: - One latch on right side and one latch on left sides. - Five bottom latches. - Six[...]

  • Seite 150

    4.6 Keyboard 4 Replacement Procedures Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4-21 Installing the Keyboard and RTC battery Install the keyboard and RTC battery according to the following procedures and Figure 4-8. 1. Place RTC battery in battery locker in the correct position 2. Connect the keyboard cable to CN250 on the system board[...]

  • Seite 151

    4 Replacement Procedures 4.7 Wireless LAN card 4.7 Wireless LAN Card Removing the Wireless LAN Card Remove the wireless LAN card according to the following procedures and Figure 4-9. CAUTION : Do not touch the connectors on the wireless LAN card and in the computer with your bare hands. Wireless LAN cards can fail if they are contaminated with swea[...]

  • Seite 152

    4.7 Wireless LAN Card 4 Replacement Procedures Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4-23 Installing the Wireless LAN Card Install the wireless LAN card according to the following procedures and Figure 4-9. 1. Insert the wireless LAN card into the CN1300 an angle of 45 degrees. 2. Press down on the wireless LAN card to secure it wi[...]

  • Seite 153

    4 Replacement Procedures 4.8 Top Cover 4.8 Top Cover Removing the Top Cover Remove the top cover according to the following procedures and Figures 4-10 and 4-11. Turn the computer upside down and remove the following 20 screws: - Sixteen M2.5x6 black flat head screws. - Four M2x2 black flat head screws. M2 5x6 black flat head screw . M2 5x6 black f[...]

  • Seite 154

    4.8 Top Cover 4 Replacement Procedures Speaker cable Power board cable T ouch pad board flat cable CN600 CN200 CN280 T op cover Latch Figure 4-11 Removing the top cover Installing the Top Cover Install the top cover with the display assembly according to the following procedures and Figures 4-10, 4-11. 1. Seat the top cover, adjusting its position.[...]

  • Seite 155

    4 Replacement Procedures 4.9 Display Assembly 4.9 Display Assembly Removing the Display Assembly CAUTION: Use care to avoid that the antenna cable is not caught between the display assembly and computer. Remove the display assembly according to the following procedures and Figures 4-1 2 . 1. Turn the computer upside down and remove two M2.5x6 black[...]

  • Seite 156

    4.9 Display Assembly 4 Replacement Procedures Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4-27 6. Remove the display module.[...]

  • Seite 157

    4 Replacement Procedures 4.9 Display Assembly 4-28 Satellite/Satellite Pro/C650D/C655D Maintenance Manual Installing the Display Assembly Install the display assembly according to the following procedures and Figures 4-12. 1. Place the display panel in the correct position and push the wireless antenna cable into the bottom cover. 2. Connect the LC[...]

  • Seite 158

    4 Replacement Procedures 4.10 System board 4.10 System Board Removing the System Board NOTE: Be careful of the eject button for the PC card. It can be damaged when removing the board. Make sure it is securely installed. Remove the System Board according to the following procedures and Figure 4-13. 1. R elease one M2.5x6 black flat head screw securi[...]

  • Seite 159

    4. 10 System board 4 Replacement Procedures Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4- - 29 Installing the System Board Install the System Board according to the following procedures and figure 4-13. NOTE: Be careful of the eject button for the PC card. It can be damaged when installing the system board. Make sure it is pushed in. 1.[...]

  • Seite 160

    4 Replacement Procedures 4.11 CPU cooling Module and Fan 4- - 30 Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4.11 CPU Cooling Module and Fan CAUTION: When removing the cooling module, keep the following in mind: The cooling module can become very hot during operation. Be sure to let it cool down before starting the repair work. Do not to[...]

  • Seite 161

    4.11 CPU cooling Module and Fan 4 Replacement Procedures M2x5 white flat head screw FA N Figure 4-14 Removing the fan 1 2 3 4 M2x2 black flat head screw CPU cooling module Figure 4-15 Removing the CPU cooling module Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4- - 31[...]

  • Seite 162

    4 Replacement Procedures 4.11 CPU cooling Module and Fan Figure 4-16 Applying silicon grease Thermal pad CPU cooling module Figure 4-17 Replace new thermal pad into correct position. T ape Thermal pad Figure 4-18 Tear down the tape. 4- - 32 Satellite/Satellite Pro/C650D/C655D Maintenance Manual[...]

  • Seite 163

    4.11 CPU cooling Module and Fan 4 Replacement Procedures Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4- - 33 Installing the CPU Cooling Module and Fan Install the cooling Module according to the following procedures and Figures 4-14, 4-15, 4-16, 4-17, and 4-18. CAUTION: When installing the cooling module, keep the following in mind: 1. B[...]

  • Seite 164

    4 Replacement Procedures 4.12 CPU 4.12 CPU Removing the CPU Remove the CPU according to the following procedures and Figures 4-19, 4-20 and 4-21. CAUTION: When removing the CPU, keep the following in mind: The CPU can become very hot during operation. Be sure to let it cool down before starting repair work. NOTE: FOXCONN CPU socket will be 180 degr[...]

  • Seite 165

    4.12 CPU 4 Replacement Procedures Installing the CPU Install the CPU according to the following procedures and Figures 4-19, 4-20, 4-21 and 4-22. 1. Check that the triangle on the cam is in the unlock position. 2. Attach the CPU to the correct position in the CPU socket. Align the CPU with the CPU socket by using the triangle as a guide. Figure 4-2[...]

  • Seite 166

    4 Replacement Procedures 4.12 CPU 3. Secure the CPU by rotating the cam 120 degrees to the right with a flat-blade screwdriver. NOTE: FOXCONN CPU socket will be 180 degrees to the left. Figure 4- 22 Securing the CPU. 4- - 36 Satellite/Satellite Pro/C650D/C655D Maintenance Manual[...]

  • Seite 167

    4.13 Display Mask 4 Replacement Procedures 4.13 Display Mask Removing the Display Mask Disassemble the ODD drive according to the following procedures and Figure 4-23. 1. Peel off four seal tapes and remove four M2.5x5 black flat head screws securing the display mask. 2. Insert your finger between the edge of display mask and the LCD and remove the[...]

  • Seite 168

    4 Replacement Procedures 4.14 FL Inverter B oard 4.14 FL Inverter Board (for CCFL panel) Removing the FL Inverter Board Remove the FL inverter board according to the following procedures and Figures 4-24. HV cable LCD FL cable FL inverter board Figure 4- 24 Removing the FL inverter board 1. Lift the LCD module, FL inverter board and disconnect the [...]

  • Seite 169

    4.14 FL Inverter Boa rd 4 Replacement Procedures Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4 - 39 Installing the FL Inverter Board Install the FL inverter board according to the following procedures and Figures 4- 24 . 1. Connect the LCD/FL cable to LCD/FL connector, and connect the HV cable to the HV connector. 2. Seat the LCD module,[...]

  • Seite 170

    4 Replacement Procedures 4.15 LCD Module (CCFL panel) 4- - 40 Satellite/Satellite Pro/C650D/C655D Maintenance Manu al 4.15 LCD Module (CCFL panel) NOTE: ICs are fragile. Use extreme care not to apply pressure to the ICs along the edges of the LCD module . NOTE: Dispose of used LCD panels (fluorescent (FL) tubes) as required by local ordinances or r[...]

  • Seite 171

    4.15 LCD Module (CCFL panel) 4 Replacement Procedures Right LCD bracket Left LCD bracket LCD module M2 5x5 black flat head screw . M2 5x5 black flat head screw . M2 5x5 black flat head screw . Figure 4-25 Removing the LCD module and screws LCD module LCD LF cable / Figure 4-26 Removing the LCD module Satellite/Satellite Pro/C650D/C 655D Maintenance[...]

  • Seite 172

    4 Replacement Procedures 4.15 LCD Module (CCFL panel) Installing the LCD Module NOTE: LCD/FL cable must be carefully peeled away before disconnecting it from the module. Install the LCD module according to the following procedures and Figures 4-25, 4- 26 . 1. Turn the LCD upside down. 2. Connect the LCD/FL cable to the LCD module connector. 3. Turn[...]

  • Seite 173

    4.16 LED Module (LED panel) 4 Replacement Procedures Satellite/Satellite Pro/C650D/C 655D Maintenance Manual 4 - 43 4.16 LED Module (LED panel) NOTE: ICs are fragile. Use extreme care not to apply pressure to the ICs along the edges of the LED module . NOTE: Dispose of used LED panels (fluorescent (FL) tubes) as required by local ordinances or regu[...]

  • Seite 174

    4 Replacement Procedures 4.16 LCD Module (LED panel) Right LCD bracket Left LCD bracket LCD module M2 5x5 black flat head screw . M2 5x5 black flat head screw . M2 5x5 black flat head screw . T ape Figure 4-27 Removing the LED module and screws LED module LED cable Figure 4-28 Removing the LED module 4- - 44 Satellite/Satellite Pro/C650D/C655D Main[...]

  • Seite 175

    4.16 LED Module (LED panel) 4 Replacement Procedures Installing the LED Module NOTE: LCD/FL cable must be carefully peeled away before disconnecting it from the module. Install the LED module according to the following procedures and Figures 4-27, 4- 28 . 1. Turn the LED upside down. 2. Connect the LED cable to the LED module connector. 3. Turn the[...]

  • Seite 176

    4 Replacement Procedures 4.17 CCD board and MIC 4.17 CCD Board and MIC Removing the CCD Board and MIC Remove the FL inverter board according to the following procedures and Figure 4-29. 1. Remove the CCD and MIC module from display rear cover. CCD and MIC module Figure 4-29 Removing the CCD board and MIC 2. Lift the CCD and MIC module from the disp[...]

  • Seite 177

    4.117 CCD board and MIC 4 Replacement Procedures Satellite/Satellite Pro/C650D/C 655D Maintenance Manual 4 - 47 Installing the CCD Board and MIC Install the FL inverter board according to the following procedures and Figure 4-29. 1. Seat the CCD and MIC module in the correct position.[...]

  • Seite 178

    4 Replacement Procedures 4.18 Power button board 4.18 Power Button Board Removing the Power Button Board Remove the Power Button Board according to the following procedures and Figures 4-30. 1. Remove two M2x2 black flat head screws. 2. Remove the Power button board. M2x2 black flat head screw Power board Figure 4-30 Removing the power button board[...]

  • Seite 179

    4.18 Power button board 4 Replacement Procedures Satellite/Satellite Pro/C650D/C 655D Maintenance Manual 4 - 49 Install the Power Button Board Install the Power Button Board and Switch Board according to the following procedures and Figures 4-30. 1. Seat the Power button board in the correct position. 3. Secure the Power button board with two M2x2 [...]

  • Seite 180

    4 Replacement Procedures 4.19 Speakers 4.19 Speakers Removing the Speakers Remove the Speakers according to the following procedures and Figure 4-31. 1. Remove two M2x3 black flat head step screw securing the left speaker. 2. Remove two M2x3 black flat head step screws securing the right speaker. 3. Remove the left and right speakers. Left speaker [...]

  • Seite 181

    4 . 19 Speakers 4 Replacement Procedure s Satellite/Satellite Pro/C650D/C 655D Maintenance Manual 4 - 51 Installing the Speakers Install the speakers according to the following procedures and Figure 4-31. 1. Seat the left and right speaker in the correct position. 2. Route the speaker cable in the wire guide. 3. Secure the left speaker with two M2x[...]

  • Seite 182

    4 Replacement Procedures 4.20 Touchpad bracket 4.20 Touchpad Bracket Removing the Touchpad Bracket Remove the Touchpad Bracket according to the following procedures and Figure 4-32. 1. Disconnect the touch pad flat cable. 2. Release two M2x3 black flat head screws securing the touchpad Bracket. M2x3 black flat head screw T ouch pad bracket T ouch p[...]

  • Seite 183

    4.20 Touchpad bracket 4 Replacement Procedure s Satellite/Satellite Pro/C650D/C 655D Maintenance Manual 4 - 53 Installing the Touchpad bracket Install the button board according to the following procedures and Figure 4-32. 1. Seat the Touchpad bracket in the correct position. 2. Secure Touchpad bracket with the two M2x3 black flat head screws.[...]

  • Seite 184

    6000 1 次 Appendices[...]

  • Seite 185

    Appendices App-ii Satellite/Satellite Pro/C650D/C655D Maintenance Manual Appendix Contents Appendix A Handling the LCD Module .......................................................................... A-1 Appendix B Board Layout ................................................................................................. B-1 B.1 System Board Fr[...]

  • Seite 186

    Apx. A Handling the LCD Module Appendices Appendix A Appendix A Handling the LCD Module Precautions for handling the LCD module The LCD module can be easily damaged during assem bly or disassembly. Observe the following precautions when handling the LCD module: 1. When installing the LCD module in the LCD c over, be sure to seat it so that it is pr[...]

  • Seite 187

    Appendices Apx. A Handling the LCD Module 3. If the panel’s surface gets dirty, wipe it with cotton or a soft cloth. If it is still dirty, try breathing on the surface to create a light condensate and wipe it again. If the surface is very dirty, we recommend a CRT cleaning agent. Apply the agent to a cloth and then wipe the panel’s surface. Do [...]

  • Seite 188

    Apx. A Handling the LCD Module Appendices 5. Glass is used in the panel, so be careful not to drop it or let it strike a hard object, which could cause breakage or cracks. 6. CMOS-LSI circuits are used in the module, so guard against damage from electrostatic discharge. Be sure to wear a wrist or ankle ground when handling the module. Satellite/Sat[...]

  • Seite 189

    Appendices Apx. A Handling the LCD Module 7. Do not expose the module to direct sunlight or strong ultraviolet rays for long periods. 8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage. A-4 Satellite/Satellite Pro/C650D /C655D Maintenance Ma[...]

  • Seite 190

    Apx. A Handling the LCD Module Appendices 9. Do not disassemble the LCD module. Disassem bly can cause malfunctions. 10. If you transport the module, do not use pack ing m aterial that contains epoxy resin (amine) or silicon glue (alcohol or oxide). These materials can release gas that can damage the panel’s polarization. Satellite/Satellite Pro/[...]

  • Seite 191

    Apx. B Board Layout Appendices Appendix B Appendix B Board Layout B.1 System Board Front View Figure B-1 Board Layout (Front) Satellite/Satellite Pro/C650D/C 655D Maintenance Manual B-1[...]

  • Seite 192

    Appendices Apx. B Board Layout B.2 System Board Back View Figure B-2 Board Layout (Back) B-2 Satellite/Satellite Pro/C650D/C655D Maintenan ce Manual[...]

  • Seite 193

    Apx. C Keyboard Scan/Character Codes Appendices Satellite/Satellite Pro/C650D/C6 55D Maintenance Manual C-1 Apx. C Keyboard Scan/Character Codes Appendix C Keyboard Scan/Character Codes Table C-1 Scan Codes (set 1 and set 2) (1/4) Cap No. Keytop Code se t 1 Code se t 2 Note Make Brea k Make Break 01 ‘ ~ 29 A9 0E F0 0E 02 1 ! 02 82 16 F0 16 03 2 @[...]

  • Seite 194

    Appendices Apx. D Keyboard Scan/Character Codes C-2 Satellite/Satellite Pro/C650D/C655D Maintenance Ma nual Table C-1 Scan Codes (set 1 and set 2) (2/4) Cap No. Keytop Code se t 1 Code se t 2 Note Make Brea k Make Break 29 | 2B AB 5D F0 5D *5 30 Caps Lock 3A BA 58 F0 58 31 A 1E 9E 1C F0 1C 32 S 1F 9F 1B F0 1B 33 D 20 A0 23 F0 23 34 F 21 A1 2B F0 [...]

  • Seite 195

    Apx. C Keyboard Scan/Character Codes Appendices Satellite/Satellite Pro/C650D/C6 55D Maintenance Manual C-3 Table C-1 Scan Codes (set 1 and set 2) (3/4) Cap No. Keytop Code set 1 Code set 2 Note Make Brea k Make Break 58 Ctrl 1D 9D 14 F0 14 *3 60 Alt (L) 38 B8 11 F0 11 *3 61 Space 39 B9 29 F0 29 62 ALT (R) E0 38 E0 B8 E0 11 E0 F0 11 75 Ins E0 52 E0[...]

  • Seite 196

    Appendices Apx. D Keyboard Scan/Character Codes C-4 Satellite/Satellite Pro/C650D/C655D Maintenance Ma nual Table C-1 Scan Codes (set 1 and set 2) (4/4) Cap Code set 1 Cod e set 2 No te No. Key top Make Break Make Break 122 F11 57 D7 78 F0 78 *3 123 F12 58 D8 7 F0 7 *3 124 PrintSc *6 *6 *6 *6 *6 126 Pause *7 *7 *7 *7 *7 202 Fn — — — — *4 20[...]

  • Seite 197

    Apx. C Keyboard Scan/Character Codes Appendices Satellite/Satellite Pro/C650D/C6 55D Maintenance Manual C-5 Table C-2 Scan Codes with left Shift key Cap No. Key top Code set 1 Code set 2 Make Break Make Break 5 5 / E0 AA E0 35 E0 B5 E0 2A E0 F0 12 E0 4A E0 F0 4A E0 12 7 5 I N S E0 AA E0 52 E0 D2 E0 2A E0 F0 12 E0 70 E0 F0 70 E0 12 7 6 D E L E0 AA E[...]

  • Seite 198

    Appendices Apx. D Keyboard Scan/Character Codes C-6 Satellite/Satellite Pro/C650D/C655D Maintenance Ma nual Table C-3 Scan Codes in Numlock mode Cap No. Key top Code set 1 Code set 2 Make Break Make Break 7 5 I N S E0 2A E0 52 E0 D2 E0 AA E0 12 E0 70 E0 F0 70 E0 F0 12 7 6 D E L E0 2A E0 53 E0 D3 E0 AA E0 12 E0 71 E0 F0 71 E0 F0 12 79 ← E0 2A E0 4[...]

  • Seite 199

    Apx. C Keyboard Scan/Character Codes Appendices Satellite/Satellite Pro/C650D/C6 55D Maintenance Manual C-7 Table C-5 Scan Codes in overlay mode Cap No. Ke ytop Code se t 1 Code se t 2 Make Break Make Break 08 7 (7) 47 C7 6C F0 6C 09 8 (8) 48 C8 75 F0 75 10 9 (9) 49 C9 7D F0 7D 11 0 (*) 37 B7 7C F0 7C 23 U (4) 4B CB 6B F0 6B 24 I (5) 4C CC 73 F0 73[...]

  • Seite 200

    Appendices Apx. D Keyboard Scan/Character Codes C-8 Satellite/Satellite Pro/C650D/C655D Maintenance Ma nual Table C-7 No.126 key scan code Key top Sh ift Co de set 1 Code se t 2 Make Make Pause Co mm o n* E1 1D 45 E1 9D C5 E1 14 77 E1 F0 14 F0 77 Ctrl* E0 46 E0 C6 E0 7E E0 F0 7E *: This key generates only make codes.[...]

  • Seite 201

    Apx. D Key Layout Appendices Apx. D Key Layout Appendix D Key Layout D.1 United States (US) Keyboard Figure D-1 US keyboard D.2 Taiwan (TW) Keyboard Figure D-2 TW keyboard Satellite/Satellite Pro/C650D/C6 55D Maintenance Manual D-1[...]

  • Seite 202

    Appendices Apx. D Key Layout D.3 Thai (TH) Keyboard Figure D-3 TH keyboard D.4 Russian (RU) Keyboard Figure D-4 RU keyboard D-2 Satellite/Satellite Pro/C650D/C655D Maintenance Manual[...]

  • Seite 203

    Apx. D Key Layout Appendices D.5 Hebrew (HE) Keyboard Figure D-5 HE keyboard D.6 Korean (KR) Keyboard Figure D-6 KR keyboard Satellite/Satellite Pro/C650D/C6 55D Maintenance Manual D-3[...]

  • Seite 204

    Appendices Apx. D Key Layout D.7 UK-English (UK) Keyboard Figure D-7 UK keyboard D.8 DU, UE, US International (USE) Keyboard Figure D-8 USE keyboard D-4 Satellite/Satellite Pro/C650D/C655D Maintenance Manual[...]

  • Seite 205

    Apx. D Key Layout Appendices D.9 Danish (DK) Keyboard Figure D-9 DK keyboard D.10 Swiss/Switzerland (SL) Keyboard Figure D-10 SL keyboard Satellite/Satellite Pro/C650D/C6 55D Maintenance Manual D-5[...]

  • Seite 206

    Appendices Apx. D Key Layout D.11 Arabic (AR) Keyboard Figure D-11 AR keyboard D.12 Czech (CZ) Keyboard Figure D-12 CZ keyboard D-6 Satellite/Satellite Pro/C650D/C655D Maintenance Manual[...]

  • Seite 207

    Apx. D Key Layout Appendices D.13 Portuguese (PT) Keyboard Figure D-13 PT keyboard D.14 Slovakian (SK) Keyboard Figure D-14 SK keyboard Satellite/Satellite Pro/C650D/C6 55D Maintenance Manual D-7[...]

  • Seite 208

    Appendices Apx. D Key Layout D.15 Italian (IT) Keyboard Figure D-15 IT keyboard D.16 French (FR) Keyboard Figure D-16 FR keyboard D-8 Satellite/Satellite Pro/C650D/C655D Maintenance Manual[...]

  • Seite 209

    Apx. D Key Layout Appendices D.17 German (GR) Keyboard Figure D-17 GR keyboard D.18 Greek (GK) Keyboard Figure D-18 GK keyboard Satellite/Satellite Pro/C650D/C6 55D Maintenance Manual D-9[...]

  • Seite 210

    Appendices Apx. D Key Layout D.19 Hungary (HU) Keyboard Figure D-19 HU keyboard D.20 Spanish (SP) Keyboard Figure D-20 SP keyboard D-10 Satellite/Satellite Pro/C65 0D/C655D Maintenance Manual[...]

  • Seite 211

    Apx. D Key Layout Appendices D.21 Turkey (TR) Keyboard Figure D-21 TR keyboard D.22 Turkish F (TF) Keyboard Figure D-22 TF keyboard Satellite/Satellite Pro/C650D/C6 55D Maintenance Manual D-11[...]

  • Seite 212

    Appendices Apx. D Key Layout D.23 Swedish (SW) Keyboard Figure D-23 SW keyboard D.24 Belgian (BE) Keyboard Figure D-24 BE keyboard D-12 Satellite/Satellite Pro/C65 0D/C655D Maintenance Manual[...]

  • Seite 213

    Apx. D Key Layout Appendices D.25 Yugoslavia (YU) Keyboard Figure D-25 YU keyboard D.26 Norwegian (NO) Keyboard Figure D-26 NO keyboard Satellite/Satellite Pro/C650D/C6 55D Maintenance Manual D-13[...]

  • Seite 214

    Appendices Apx. D Key Layout D.27 Scandinavian (N5) Keyboard Figure D-27 N5 keyboard D.28 Canadian Bilingual (CB) Keyboard Figure D-28 CB keyboard D-14 Satellite/Satellite Pro/C65 0D/C655D Maintenance Manual[...]

  • Seite 215

    Apx. D Key Layout Appendices D.29 Romania (RO) Keyboard Figure D-29 RO keyboard D.30 Bulgaria (BU) Keyboard Figure D-30 BU keyboard Satellite/Satellite Pro/C650D/C6 55D Maintenance Manual D-15[...]

  • Seite 216

    Appendices Apx. D Key Layout D.31 Japan (JP) Keyboard Figure D-31 JP keyboard D-16 Satellite/Satellite Pro/C65 0D/C655D Maintenance Manual[...]