Toshiba Satellite Bedienungsanleitung

Toshiba Satellite M40 Maintenance Manual Toshiba Personal Computer Satellite M4 0 Maintenance Manual TOSHIBA CORPORATION[...]

ii S/ No.[...]

T oshiba Satellite M40 Maintenance Manual iii Copyright © 2004 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without t he prior written permission of Toshiba. No patent liability is assumed with respect to the use of the information contained herein. Toshi ba Satellite M40 Maint[...]

Toshiba Satellite M40 Maintenance Manual Preface This maintenance manual describes how to perform hardware service maintenance for the T oshiba Personal Computer Satellite M40 , referred to as Satellite M40 in this manual. The procedures described in this manual are intended to help service technicians isolate faulty Field Replaceable Units (FRUs) [...]

T oshiba Satellite M40 Maintenance Manual v The manual is divided into the following parts: Chapter 1 Hardware Overview describes the Toshiba Satellite M40 system unit and each FRU. Chapter 2 Troubleshooting Procedures explains how to diagnose and resol ve FRU problems. Chapter 3 Test and Diagnostics describes how to perform test and diagnostic ope[...]

Toshiba Satellite M40 Maintenance Manual Conventions This manual uses the following formats to describe, identify, and highlight terms and operating procedures. Acronyms On the first appearance and whenever necessary for clarification acronyms are enclosed in parentheses following their definition. For example: Read Only Memory (ROM) Keys Keys are [...]

T oshiba Satellite M40 Maintenance Manual vii Table of Contents Chapter 1 Hardware Overview 1.1 Features ................................................................................................................... 1 - 1 1.2 System Unit Components .......................................................................................... 1 - 8[...]

Toshiba Satellite M40 Maintenance Manual Procedure 2 Partition Check ............................................................................ 2 - 11 Procedure 3 Format Check .............................................................................. 2 - 12 Procedure 4 Test Program Check .......................................................[...]

T oshiba Satellite M40 Maintenance Manual ix 2.14 Cooling Module ...................................................................................................... 2 - 25 Procedure 1 Test Program Check ..................................................................... 2 - 25 Procedure 2 Connector Check and Rep lacement Check ................[...]

Toshiba Satellite M40 Maintenance Manual Cha pter 4 Replacement Procedures 4.1 General .................................................................................................................... 4 - 1 4.2 Wireless Lan Card .................................................................................................. 4 - 18 4.3 HDD ....[...]

T oshiba Satellite M40 Maintenance Manual xi Appendices Appendix A Handling the LCD Module .............................................................................. A - 1 Appendix B Board Layout ................................................................................................... B - 1 Appendix C Keyboard Scan/Character Codes ...[...]

Chapter 1 Hardware Overview[...]

1 Hardware Overview ii Satellite M 40/M45 TECRA A4 d ynabook Vx/4 Maintenance Manual[...]

1 Hardware Overview Satellite M40/M45 TECRA A4 d ynabook Vx/4 Maintenance Manual iii Chapter 1 Contents 1.1 Features .................................................................................................................................1 1.2 System Unit Components ...........................................................................[...]

1 Hardware Overview iv Satellite M 40/M45 TECRA A4 d ynabook Vx/4 Maintenance Manual Fi gures Figure 1 - 1 id_10_10g Parts description placement .................................................................... 6 Figure 1 - 2 id_10c_10gc Parts description placement ................................................................. 7 Figure 1 - 3 [...]

1.1 Features 1 Hardware Overview Satellite M40/M45 TECRA A4 d ynabook Vx/4 Maintenance Manual 1 1.1 Features The Toshiba Satellite M40/M45 TECRA A4 d ynabook VX/4 is a full size notebook PC base d on the Intel Pentinm M ( Dothan ) and Celeron M processor, providing high - speed processing capabilities and advanced features. The computer employs a L[...]

1 Hardware Overview 1.1 Features 2 Satellite M 40/M45 TECRA A4 d ynabook Vx/4 Maintenance Manual The computer h as two SO DIMMs slot comes standard with DDR 2 7 00 module. It supports PC2 7 00 and uses SO DIMMs (DDR SDRAM) driven at 2.5 V, accepting BTO/CTO for your memory requirements. It can incorpora te up to 2 GB of main memory . using the foll[...]

1.1 Features 1 Hardware Overview Satellite M40/M45 TECRA A4 d ynabook Vx/4 M aintenance Manual 3 ? Display The LCD displays available come in the following four sizes: ? 15.4 ” W XGA - Non CSV /15 .4 ” W XGA - CSV /15.4 ” WXGA - CSV(High brightness) /15 .4 ” WS XGA + - Non CSV colo r display, resolution 1 280 ? 800 /1 680 ? 1050,262,144 col[...]

1 Hardware Overview 1.1 Features 4 Satellite M 40/M45 TECRA A4 d ynabook Vx/4 Maintenance Manual ? Toshiba Pointing Device Toshiba Pointing Device has one kind of Synaptice TouchPad with two button . ? Sound system The A D1981B integrated audio controller supports multimedia. The sound system c ontains the following: ? Stereo speakers ? Headphone j[...]

1.1 Features 1 Hardware Overview Satellite M40/M45 TECRA A4 d ynabook Vx/4 M aintenance Manual 5 The Parallel Port is optional integrated device. to supported connect a printer or another parallel device. The port is IEEE - 1284 compliant and supports Extended Capabilities Port (ECP). ? CD Key (optional) The CD Key supports to play Audio CD directl[...]

1 Hardware Overview 1.1 Features 6 Satellite M 40/M45 TECRA A4 d ynabook Vx/4 Maintenance Manual ? Figures 1 - 1 /1 - 2 and 1 - 3 show the computer and its system unit configuration, respectively. Figure 1 - 1 id_10_10g Parts description placement[...]

1.1 Features 1 Hardware Overview Satellite M40/M45 TECRA A4 d ynabook Vx/4 M aintenance Manual 7 Figure 1 - 2 id_10c_10gc Parts description placement[...]

1 Hardware Overview 1.1 Features 8 Satellite M 40/M45 TECRA A4 d ynabook Vx/4 Maintenance Manual Figure 1 - 3 id_JP Parts description placement[...]

1.1 Features 1 Hardware Overview Satellite M40/M45 TECRA A4 d ynabook Vx/4 Maintenance Manual 9 Figure 1 - 4 T he computer Block diagram[...]

1.1 Features 1 Hardware Overview Satellite M40/M45 TECRA A4 d ynabook Vx/4 Maintenance Manual 10 Figure 1 - 5 System Board configuration[...]

1.2 System Unit Components 1 Hardware Overview Satellite M40/M45 TECRA A4 d ynabook Vx/4 Maintenance Manual 11 1.2 System Unit Components Figure 1 - 6 is a block diagram of the system unit. Figure 1 - 6 System unit block diagram[...]

1 Hardware Overview 1.2 System Unit Components 12 Satellite M 40/M45 TECRA A4 d ynabook Vx/4 Maintenance Manual The sy stem unit of the computer consists of the following components: ? Processor: Intel Pentium M ( Dothan ) Processor and Celeron M ? Intel Dothan Processor (533MHz) ? Core speed: 1.6/1.73/1.86/2.0/2.13 GHz ? System bus: 533 MHz ? On -[...]

1.2 System Unit Components 1 Hardware Overview Satellite M40/M45 TECRA A4 d ynabook Vx/4 Mai ntenance Manual 13 ? BIOS ROM (flash E E PROM) ? 4Mb x 1 chip (512KB flash parts) ? 33 kb used for EC BIOS ? 51 kb used for VGA BIOS ? 40 kb used for pxe boot ? 4kb used for logo ? 7kb used for USB ? 15 kb used for SCU ? 14 kb used for PCI ? 2 kb used for A[...]

1 Hardware Overview 1.2 System Unit Components 14 Satellite M 40/M45 TECRA A4 d ynabook Vx/4 Maintenance Manual ? North Bridge: Intel 915 PM ? CPU interface and control ? System Memory Support ? PCI Express* Graphics (PEG) Interface ? Direct Media Interface (DMI) ? Power M anagement ? South Bridge: ICH6 - M ? Direct Media Interface (DMI) ? PCI Expr[...]

1.2 System Unit Components 1 Hardware Overview Satellite M40/M45 TECRA A4 d ynabook Vx/4 Mai ntenance Manual 15 The AD1981B integrated audio controller supports multimedia . The sound system feature contains the following: ? Variable Sample Rate Audio ? External Audio Power – Down Control ? Integrated Stereo Headphone Amplifier ? Stereo Full - Du[...]

1 Hardware Overview 1.2 System Unit Components 16 Satellite M 40/M45 TECRA A4 d ynabook Vx/4 Maintenance Manual ? Generating the clock signal required for the system ? Modem Controller ? Built - in MDC card with askey ? Functions of the modem controller: ? Digital signal co nductor protection ? Ring wake - up support ? Communication codes supported[...]

1.2 System Unit Components 1 Hardware Overview Satellite M40/M45 TECRA A4 d ynabook Vx/4 Mai ntenance Manual 17 ? Tran sfer Rate ? IEEE 802.11 a /g : Standard 54M b ps ? IEEE 802.11g: Standard 54M b ps ? Frequency Channel ? IEEE802.11 a /g : 5 .4GHz ? IEEE802.11g: 2.4GHz[...]

1.3 2.5 - inch HDD 1 Hardware Overview Satellite M40/M45 TECRA A4 d ynabook Vx/4 Maintenance Manual 18 1.3 2.5 - inch HDD The computer contains an extremely low - profile and lightweight, high - performance HDD. The HDD incor porates a 2.5 - inch magnetic disk and mini - Winchester type magnetic heads. Storage capacities supported are 30, 40,60,80,[...]

1.4 DVD - ROM Drive 1 Hardware Overview Satellite M40/M45 TECRA A4 d ynabook Vx/4 Maintenance Manual 19 1.4 DVD - ROM Drive The DVD - R OM drive accepts 12 - cm (4.72 - inch) and 8 - cm (3.15 - inch) discs. The drive provides high - speed data transfer, playing back a DVD at up to 8x speed and reading up to 10,820 Kbytes per second from DVD - ROM a[...]

1 Hardware Overview 1.5 CD - RW/DVD - ROM Drive 20 Satellite M 40/M45 TECRA A4 d ynabook Vx/4 Maintenance Manual 1.5 CD - RW/DVD - ROM Drive The CD - RW/DVD - ROM drive accepts 12 - cm (4.72 - inch) and 8 - cm (3.15 - inch) discs. At maximum, the drive can play back a DVD at 8x speed, read CD - ROM at 24x speed, and wr ite CD - R at 24x speed and H[...]

1.6 DVD Dual (Double Layer) 1 Hardware Overview Satellite M40/M45 TECRA A4 d ynabook Vx/4 Maintenance Manual 21 1. 6 DVD Dual (Double Layer) The DVD - Dual drive accepts 12 - cm (4.72 - inch) and 8 - cm (3.15 - inch) discs. At maximum, the drive can play back a D VD at 8x speed, read CD - ROM at 24x speed, and write CD - R at 24 x speed and CD - RW[...]

1 Hardware Overview 1.7 DVD Super Multi 22 Satellite M 40/M45 TECRA A4 d ynabook Vx/4 Maintenance Manual 1. 7 DVD Super Multi The DVD Super Multi drive accepts 12 - cm (4.72 - inch) and 8 - cm (3.15 - inch) discs. At maximum, the drive can play back a DVD at 8x speed, read CD - ROM at 24x speed, and write CD - R at 16 x speed and CD - RW at 4 x spe[...]

1.8 DVD Super Multi (Double Layer) 1 Hardware Overview Satellite M40/M45 TECRA A4 d ynabook Vx/4 Mai ntenance Manual 23 1.8 DVD Super Multi (Double Layer) The DVD Super Multi drive accepts 12 - cm (4.72 - inch) and 8 - cm (3.15 - inch) discs. At maximum, the drive can play back a DVD at 8x speed, read CD - ROM at 24x speed, and write CD - R at 24 x[...]

1.9 Power Supply 1 Hardware Overview Satellite M40/M45 TECRA A4 d ynabook Vx/4 Maintenance Manual 24 1.9 Power Supply The power supply unit provides many different voltages for the system board and performs the following functions: 1. Power input monitor ? Checks whether the DC power supply (AC adapter) is connected to the comput er. ? Checks wheth[...]

2.0 Batteries 1 Hardware Overview Satellite M40/M45 TECRA A4 dynabook Vx/4 Maintenance Manual 25 2 . 0 Batteries The computer has the following three types of batteries: ? Main battery pack ? Real time cloc k (RTC) battery Table 1 - 7 lists the specifications of these batteries. Table 1 - 7 Battery specifications Battery name Material Output voltag[...]

1 Hardware Overview 2.0 Batteries 26 Satellite M 40/M45 TECRA A4 d ynabook Vx/4 Maintenance Manual State Charge time Off - state charge 6/12 Cell About 4 hours ma x On - state charge 6/12 Cell About 4~10 hours max NOTE: The time required for normal charge depends on the power consumption by the system. Using the fluorescent lamp and frequently acce[...]

2 Troubleshooting 2 - i Satellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual 2 ?? Chapter 2 Troubleshooting[...]

2 Troubleshooting 2 - ii Satellite M40 / M45 TECRA A4 dynaboo k Vx/4 Maintenance Manual Chapter 2 Contents 2.1 Outline .................................................................................................................... 2 - 1 2.2 Basic Flowchart ........................................................................................[...]

2 Troubleshooting Satellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual 2 - iii Procedure 4 Test Program Check .................................................................. 2 - 13 Procedure 5 Connector Check and Replacement Check ............................... 2 - 14 2.6 Keyboard .......................................................[...]

2 Troubleshooting 2 - iv Satellite M40 / M45 TECRA A4 dynaboo k Vx/4 Maintenance Manual Figures Figure 2 - 1 Basic flowchart .............................................................................................. 2 - 3 Tables Table 2 - 1 HDD error code and status ........................................................................... 2 -[...]

2.1 Outline 2 Troubleshooting S atellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual 2 - 1 2.1 Outline This chapter d escribes the fault diagnosis procedures for field replaceable units (FRUs) in the computer. The FRUs covered here are as follows: 1. System board 2. 2.5 - inch HDD 3. Keyboard 4. Di splay 5. ODD drive 6. LAN 7. SD /MS/SM/MMC[...]

2 Troubleshooting 2.2 Basic Flowcha r t 2 - 2 Satellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual 2.2 Basic Flowchart The basic flowchart in Figure 2 - 1 serves as a guide for identifying a possibly faulty FRU. Before going through the diagnostic flowchart steps, verify the following: ? Ask the user if a password has been r egistered and,[...]

2.2 Basic Flowcha r t 2 Troubleshooting S atellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual 2 - 3 Figure 2 - 1 Basic flowchart (1/2) Star t Connect the AC Adapter DC IN LED on ?? BATTERY LED on ?? Turn the power on. Any error message displayed ?? Message "In Touc h with Tomorrow Toshiba" displayed Follow the power supply diagno[...]

2 Troubleshooting 2.2 Basic Flowcha r t 2 - 4 Satellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual Figure 2 - 1 Basic flowchart (2/2) Keyboard works well ?? Follow the keyboard diagnostic p rocedure in Section 2. 6 No 1 Insert Bootable CD into ODD Diagnostic Program Loaded ?? Perform each test with the diagnostic program. Any error detecte[...]

2.2 Basic Flowcha r t 2 Troubleshooting S atellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual 2 - 5 If the diagnostic program cannot detect an error, the error ma y be intermittent. Run the continuous test program repeatedly to isolate the problem. Check the log utilities function to confirm which diagnostic test detected the error, then p[...]

2 Troubleshooting 2.3 Power Supply 2 - 6 Satellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual 2.3 Power Supply The power sup ply in the computer controls many functions and components. To check if the power supply is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Power Icon Check Procedu[...]

2.3 Power Supply 2 Troubleshooting S atellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual 2 - 7 ? DC IN LED DC IN LED Power supply status On in Green DC power being supplied (from the AC adapter) Off Battery damage and can ’ t charge during DC - in. Off Else If the DC IN LED off, follow the steps below: 1. Remove the battery pack and the [...]

2 Troubleshooting 2.3 Power Supply 2 - 8 Satellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual Procedure 2 Connection Check Power is supplied to the system board as illustrated below: AC adaptor System board AC power cord AC adaptor cord Battery pack Follow the steps below to check whether each connector has been connected correctly: Check [...]

2.4 System Board 2 Troubleshooting S atellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual 2 - 9 2.4 System Board To check if the system board is defective or malfunctioning, fol low the troubleshooting procedures below as instructed. Procedure 1 Message Check Procedure 2 Test Program Check Procedure 3 Replacement Check Procedure 1 Message C[...]

2 Troubleshooting 2.4 System Board 2 - 10 Satellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual Proce du re 2 Test Program Check The maintenance test program contains several programs for diagnosing the system board and CPU. Execute the following test programs using the procedures described in Chapter 3. 1. System test 2. Memory test 3. Key[...]

2.5 2.5 - inch HDD 2 Troubleshooting S atellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual 2 - 11 2.5 2.5 - inch HDD To check if the 2.5 - inch HDD is defe ctive or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Message Check Procedure 2 Partition Check Procedure 3 Format Check Procedure 4 Test Progr[...]

2 Troubleshooting 2.5 2.5 - inch HDD 2 - 12 Satellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual c reate a DOS partition on drive C. Then restart the computer.. If the problem persists, go to Procedure 3. Check 3 If drive C is listed as active in the FDISK menu, perform Check 4. If drive C is not listed as active, return to the FDISK menu [...]

2.5 2.5 - inch HDD 2 Troubleshooting S atellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual 2 - 13 Procedure 4 Test Program Check Run the HDD test program stored on the maintenance test program disk for all test items. See Chapter 3 for details on how to use the test program . If an error is detected during the HDD test, an error code and s[...]

2 Troubleshooting 2.5 2.5 - inch HDD 2 - 14 Satellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual Procedure 5 Connector Check and Replacement Check The HDD or system board may be faulty. Disassemble the computer following the steps described in Chapter 4 and perform the following checks: Check 1 M ake sure the following connectors have been[...]

2.6 Keyboard 2 Troubleshooting S atellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual 2 - 15 2.6 Keyboard To check if the computer’s keyboard is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Test Program Check Procedure 2 Connector Check and Replacement Check Procedure 1 Test Program C[...]

2 Troubleshooting 2.7 Display 2 - 16 Satellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual 2.7 Display To check if the computer’s display is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 External Monitor Check Procedure 2 Test Program Check Procedure 3 Connector Check and Replacement C[...]

2.7 Display 2 Troubleshoot ing S atellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual 2 - 17 Check 3 The FL may be faulty. Replace it with a new one and return to Procedure 3. If there is still an error, perform Check 4. Check 4 The FL inverter board may be faulty. Repla ce it with a new one and return to Procedure 3. If there is still an e[...]

2 Troubleshooting 2.8 ODD Drive 2 - 18 Satellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual 2.8 ODD (Optical Disk Drive) To check if th e internal ODD drive is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 ODD Cleaning Check Procedure 2 Test Program Check Procedure 3 Connector Check and[...]

2.8 ODD Drive 2 Troubleshooting S atellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual 2 - 19 Check 3 The ODD drive may be faulty. Replace the ODD drive with a new one following the steps in Chapter 4. If the ODD drive is still not functioning properly, perform Check 4. Check 4 The system board may be faulty. Replace it with new one followi[...]

2 Troubleshooting 2.9 LAN 2 - 20 Satellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual 2.9 LAN To check if the computer’s LAN is defective or malfunctioning, follow the troubleshooting procedu res below as instructed. Procedure 1 Test Program Check Procedure 2 Connector Check and Replacement Check Procedure 1 Test Program Check Execute th[...]

2.10 SD Card/Memory Stick 2 Troubleshooting S atellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual 2 - 21 2.10 SD /MS/SM/MMC/XD Card (Optional) To check if the computer’s SD /MS/SM/MM C/XD Card is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Test Program Check Procedure 2 Connector Ch[...]

2 Troubleshooting 2.11 Parallel Port 2 - 22 Satellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual 2.11 Paralle l Port (Option al ) To check if the computer’s Parallel Port is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Test Program Check Procedure 2 Connector Check Procedure 1 Test P[...]

2.12 Audio Test 2 Troubleshooting S atellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual 2 - 23 2.12 Audio Test To check if the computer’s Speaker is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Test Program Check Procedure 2 Connector Check and Replacement Check Procedure 1 Test Prog[...]

2 Troubleshooting 2.13 IEEE 1394 Test 2 - 24 Satellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual 2.13 IEEE 1394 Test (Optional) To check if the computer’s IEEE 1394 is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Test Program Check Proc edure 2 Connector Check Procedure 1 Test Progr[...]

2.14 Cooling Module 2 Troubleshooting S atellite M40 / M45 TECRA A4 dynabook Vx/4 Maintenance Manual 2 - 25 2.14 Cooling Module To check if the computer’s cooling module is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Test Progr am Check Procedure 2 Connector Check and Replacement Check Proce[...]

Chapter 3 Diagnostic Programs[...]

3 Diagnostic Programs ii Satelite M40/M45 TECRA A4 Dynaboo k Vx/4 Maintenance Manual Chapter 3 Contents 3.1 General ........................................................................................................................ 1 3.2 Quick Start ...............................................................................................[...]

3 Diagnostic Programs Satelite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual iii 3.9 Communication (COMM) ........................................................................................ 54 3.10 Peripheral .................................................................................................................. 58 3.11 Error Cod[...]

[...]

3.1 General 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 1 3.1 General This chapter explains the diagnostic programs w hich tests and diagnoses the functions of the hardware components of this computer. The diagnostic programs can be classified into two types: OPTION and DIAGNOSTIC TEST. NOTE 1: This Diagnost[...]

3 Diagnostic Programs 3.1 General 2 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual ? A C D - ROM Drive r (for CD - ROM test) ? Audio Line for audio record test ? A Data CD (for CD - ROM test) ? Loop back connector of LPT ? SD , MS Card The following chapters describe all th e test details. The test items could be selected from the D [...]

3.2 Quick Start 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 3 3.2 Quick Start When the system is b ooting from Service Diagnostic CD, the following screen will be display ed: Please select a test item or select 0 to exit to MS - DOS: 3.2.1 Quick Test When this item is selected , the system will run the confi[...]

3 Diagnostic Programs 3.2 Quick Start 4 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 1. Use arrow key to select ‘ TouchPad ’ item on ‘P eripheral ’ in the menu, then press Space key to select it . (When it is being selected, there is a X marked in the [ ] ) S elect ‘ Test Mouse ’ or press F8 to run t he test. The prompt[...]

3.2 Quick Start 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 5 Here is another method to run the test: Highlig ht a test item by using arrow keys, then , press Enter to start. If there are parameters provided, user should set parameter s in the parameter dialog window. CPU Speed T est (Step by Step): 1. Selec[...]

3 Diagnostic Programs 3.2 Quick Start 6 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 3. Test Result System will automatically run and display the test result as follows: F ollowing is the compar ison report of the two testing metho ds mentioned above: 1) Configuration and Running As to the method used in Mouse test, the user is req[...]

3.2 Quick Start 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 7 3.2.3 Keyboard Layout test The test purpose is t o check whether 18 kinds of Europe an keyboards run well during the test procedure. When users choose the item, the names of these countries w ill be d isplayed on the screen for user choice. User p[...]

3 Diagnostic Programs 3.2 Quick Start 8 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual When the user has checked all the keys and all the keys in the screen have change d color , the diagnostics program would automatically end the test and r eport the pass information. If keyboard test fail s , program will terminate the test and rep[...]

3.2 Quick Start 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 9 User can press any key to exit the program. 3.2.8 DMI Write In addition to reading the DMI information, DMI Write also permit s attributes editing and updating: Manufacture, Product Name, Version, Serial Number, UUID and OEM Part Number , etc. The[...]

3 Diagnostic Programs 3.2 Quick Start 10 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual The attribute s that hav e been modified would be marked in red ; otherwise in yellow . User could press F2 to save the changes , or press F4 to ignore and exit the current program. 3.2.9 System Information This function is used to read the system[...]

3.2 Quick Start 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 11 The name of the program is marked on the top of the screen. At the b ottom, the function keys are listed for user operation. During the detection , keyboard operation is invalid. When the detection is finished, the hardware components information[...]

3 Diagnostic Programs 3.2 Quick Start 12 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 3.2.11 Exit to M S DOS Select this item to exit to MS DOS . 3.2.12 The Diagnostics Screen Explanation Below is an example of running a test item . It includes the following parts : Diagnostics Windows, Test Status Area, Progress Bar, Error List, T[...]

3.2 Quick Start 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 13 1. Diagnostics Windows When a test item is running, a Diagnostics Windows is displayed in full screen. It consists of the following parts : Title Bar, Test Running Status and Report Panel, Status Bar. There would prompt a message box called USER [...]

3 Diagnostic Programs 3.2 Quick Start 14 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual Title Bar located at the top of th e window, it includ es info rmation as follows: ? Program Name and Its Version: Service Diagnostic Ver 1.01 ; ? Test Module Name: Label the name and version of the test module. For example, in the above screen, t[...]

3.2 Quick Start 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 15 ? Wait O n Error : D isplay ‘WAIT’ as shown in the above screen when ‘ Wait On Error ’ is enabled ; ? Pause Enable : Display ‘ PAUSE ’ when “ Pause Enable ” is enabled; ? Manual Interrupt Method : Display ‘ Esc: Break ’ to tel[...]

3 Diagnostic Programs 3.3 Option 16 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 3.3 Options 3.3.1 Overview In Service Diagnostics, with the Options menu user can configure the batch parameters, test item ’ s p arameters and th ose parameters created by the LOG file. Options Menu Notes: ? Select All/None Items Switch between sele[...]

3.3 Option 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 17 Configure batch parameters and all the test item ’ s p arameters. ? Load Batch Parameters Upload all the test items and the parameters to the *.ini file . ? Save Batch Parameters Save all the parameters and the test items that are configured in the [...]

3 Diagnostic Programs 3.3 Option 18 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual ? Test Order Specify the order of the test items. Choose ' Sequence ' to adopt the sequential mode ; choose 'Random' to run the test ite ms in random sequence . ? Test Options Choose one of the following options: ? Wait On Error Wai[...]

3.3 Option 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 19 ? Monitor CPU Thermal Monitor the CPU temperature. ? Test Mode ? LOOPBOUND Th e chosen test items will run repeatedly according to the times specified in the 'Number of Loops ' . ? TIMEBOUND T he chosen test items will run for an extent time[...]

3 Diagnostic Programs 3.3 Option 20 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual ? Interactive If the item is enabled during the test, the test items that need user to response can run normally, such as PS2 Mouse test; If it is dis abled , those test items will report FAIL . Whether the option here is enabled, it only affect s the [...]

3.3 Option 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 21 In this window , you can specify the .INI files that you wanted to be edited or modified. 3.3.5 Save Batch Parameters Here you can save the edited or modified content to the batch parameters files.[...]

3 Diagnostic Programs 3.3 Option 22 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 3.3.6 L OG Parameters Setting You can access the Log Parameters screen through Service Diagnostics Options - Generate Report. ? Report Destination If selecting 'NONE', no log file will be generated ; if selecting 'FILE', a log fil[...]

3.3 Option 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 23 If selecting this parameter, errors and time will be recorded only when the test fails. ? Append to Old Log File If selecting this parameter, the new log will be added to the old one. ? Log Device Info on Fail If selecting this parameter, details of t[...]

3 Diagnostic Programs 3.3 Option 24 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual In this screen, you can specify a Log file and view it with the viewer designated in Specify LOG Viewer. 3.3.9 LOG Viewer Service Diagnostic Log vi ewer : ? ?, ? Scroll a line backward or forward on the screen. ? Page Up, Page Down[...]

3.3 Option 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 25 Scroll a page backward or forward on the screen. ? Esc Exit the Log viewer. ? F1 Display the Help information about the Log viewer operations and the functional keys. ? Ctrl+Home Go to th e start of the log file. ? Ctrl+End Go to the end of the log fi[...]

3 Diagnostic Programs 3.3 Option 26 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual Base Memory Test : PASS Extended Memory Test : PASS End Time: Mon Jan 05 10:47:51 200 4 <Module Name>: Service Diagnostic Ver 1.0 1 ... Mouse Test Build Date 2002.12.31 [ MSTPad ] Begin Time: Mon Jan 05 10:48:54 200 4 Touch Pad Test : FAIL ITEM T[...]

3.4 Subtests 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 27 3.4 Subtests Test Group Sub Item ID Subtest Test ID Test it ems Internal Name System 01 CPU 01 Basic Function ality Test [ CPUBasicFun ] 02 CPU Speed [ CPUSpeed ] 03 Coprocessor NPU Basic Functions NPU Interrupt Coprocessor [ NPUFun ] [ NPUInterrupt[...]

3 Diagnostic Programs 3.4 Subtests 28 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 08 Cache Memory [CacheOne] 09 Random Memory 01 Randomize Test [ Random ] 02 Random Increment Read/Write [ RandIncr ] 10 Data Bus Test [ DataBus ] 11 Memory Speed Test [Mem Speed] Storage 01 HDD 01 Sequential/Random R/W [ SeqRdRW1 ] 02 Sequential/Rand[...]

3.4 Subtests 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 29 VESA 1024x768x16M Mode VESA 1024x768x32bit Mode [ V 1024768 _ 32 ] 04 1280X1024 Video Modes VESA 1280x1024x32K Mode VESA 1280x1024x64K Mode VESA 1280x1024x16M Mode VESA 1280x1024x32bit Mode [ V 12801024 _ 15 ] [ V 12801024 _ 16 ] [ V 12801024 _ 24 ][...]

3 Diagnostic Programs 3.4 Subtests 30 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 03 Keyboard Clock Line [ K B ClokLn ] 02 Mouse 01 TouchPad [ MS Tpad][...]

3. 5 System Test 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 31 3.5 S ystem Test M o ve arrow key s and press the Space key to select CPU test item from Service Diagno stic menu , then highlight CPU and press the Enter to run this test item. Subtest 01 CPU 1. Basic Function ality Test This test item is to ch[...]

3 Diagnostic Programs 3. 5 System Test 32 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual CPU Speed Comparison -- Whether you want to make a compariso n of the CPU speed with the value set in ‘ Expected CPU Speed ’ , you should choose ‘ Yes ’ ; otherwise , ‘ No ’ . Expected CPU Speed -- Specify the expected CPU Speed value[...]

3. 5 System Test 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 33 Speedstep is a kind of energy - saving ru nning mode that is supported by the Pentium III or above . This test item is to check whether the CPU supports Speedstep function according to the change of the CPU work frequency in different power supp[...]

3 Diagnostic Programs 3. 5 System Test 34 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual This test item is to check whether the system clock/calendar works normally . 4. PCI System This test item is to check whether the bus number, device number and function number in P CI bus are valid. 5. Plug and Play This test item is to check: 1[...]

3. 5 System Test 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 35 2. Chipset Fan Speed Test This test item is to check whether Chipset Fan exists or not. If it exists, the test will check the speed of Chipset Fan at the status of Power On or Power Off.[...]

3 Diagnostic Programs 3.6 Memory Test 36 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 3.6 M emory Test This test module is to check whether the memory chip works normally . Subtest 01 B IOS ROM This test item is to check the validity of BIOS ROM that includes two sub - items -- ROM Read and ROM Write Protection. ROM Read is to chec[...]

3. 6 Memory Test 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 37 test coverage would be based on the setting and the value in ‘ Percent (%) mentioned at below . Pattern Size: Choose the pattern size – BYTE, WORD, DWO RD or ALL . Percent (%): Choose the percentage of the defined range of the memory to be t[...]

3 Diagnostic Programs 3.6 Memory Test 38 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual In addition to the above pattern test of the memory, there is Read/Write Cycle test and Read Cycle Test for the extended memory. Below is the parameter dialog window of the extended pattern test. Test Range: Specify the test coverage range of Exte[...]

3. 6 Memory Test 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 39 The test item is to ensure that there is no short circuitry issue in memory chip. The p arameter dialog window is the same as that in ‘ Subtest 02 Pattern ’ . Subtest 05 Walking 0 ’ s Test The test item is to ensure that there is no open c[...]

3 Diagnostic Programs 3.6 Memory Test 40 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual This test item is to chec k whether the memory could be correctly accessed with randomized memory address and a series of incremental data. Subtest 10 Data Bus Test This test item is to check whether the data bus work s normally. Subtest 11 Memory[...]

3.7 Stora ge 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 41 3.7 Storage Subtest 01 HDD This test item runs on IDE hard disks. It checks the functions and performance of IDE hard disk. 1. Sequential/Random R/W This test item is to check the HDD’s Read/Write function through data writing and reading to HDD. [...]

3 Diagnostic Programs 3.7 Storage 42 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual (1) Read & Write – W rite data on the disk, then read it out and compare the two value; (2) Read Verify — Read data only ; (3) Unprotected Write — W rite data on the disk without backup original data . Option — Select sequential test or ra[...]

3.7 Stora ge 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 43 Check the HDD controller’s status, including HDD interrupt and unexpected interrupt. 5. Diagnostic Read/Write T his test item is a quick test to verify whether the HDD could be correctly accessed and the user could spe cify the percentage in the b[...]

3 Diagnostic Programs 3.7 Storage 44 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 3. Data CD Butterfly Seek Check the seek function of the ODD drive. It will perform a serial of seeking operations. F irst , locate the minimum LBA address, then the maximum, the sub - minimum, the sub - maximum and meet at center point. This test nee[...]

3.8 Video 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 45 3.8 Video This test item tests the video by : 1. displaying the figures in different graphic mode s. 2. displaying the property and color of the characters in different text mode s . User will confirm whether each video mode works normally by judg ing [...]

3 Diagnostic Programs 3.8 Video 46 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual It would display the below texts of the different attributes in the screen: 1. Text in n ormal attribute; 2. Text in blinking normal attribute; 3. Text in inverse attribute; 4. Text in blinking inverse attribute; 5. Text in hi - intensity attribute; 6. [...]

3.8 Video 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 47 4. Text Color This test item is to check whether all 16 colors foreground and all 8 colors background works normally in VGA text mode. T he bit4 - 6 of the attribute byte of a character defines 8 background colors ( black, blue, green, cyan, red, brown[...]

3 Diagnostic Programs 3.8 Video 48 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual In the test, user is required to respond according to the instruction in the screen. Subtest 02 640 * 480 VGA Mode This test item is to check whether 680*480 VGA Text mode works normally. In the test, user is required to respond according to the instruc[...]

3.8 Video 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 49 1. 640X480 Video Modes Test p 2. 800X600 Video Modes Test 3. 1024X768 Video Modes Test 4. 1280 x 1024 Video Modes Test 5. 1400 X 1050 Video Modes Test 6. 1600 X 1200 Video Modes Test Subtest 04 VESA Video Memory This test item is to check whether VESA [...]

3 Diagnostic Programs 3.8 Video 50 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual Subtest 05 DDC Test This test item is to check whether the video card and the video display support DDC (Display Data Channel). Subtest 06 AGP Test This test item is to report the system ’ s Accelerated Graphic s Port status and check whether AGP regi[...]

3.8 Video 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 51 Subtest 08 Register Test This test item is to check whether the registers of the video adapter works normally. Subtest 09 Color Purity Test This test item is to check whether the system (the video adapter and the display) could display the purity color[...]

3 Diagnostic Programs 3.8 Video 52 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual Subtest 11 DAC/Palette Address This test item is to check the function of DAC registers and Palette registers . In the test, user is required to respond according to the instruction in the screen.[...]

3.8 Video 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 53 Subtest 1 2 BitBlt Engine Test This test item is to check whether the BitBlt engine works normally. BitBlt is the abbreviation of ‘Bit Block Translate’, that means the copy of data block for 3 types, from video memory to video memory, from video me[...]

3 Diagnostic Programs 3.9 Communication 54 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 3.9 Communication (COMM) Subtest 01 LPT This test item is to check whether there is open or short circuit issue in the external pins by looping back the external pins, control ling the voltage of each d ata pin, control pin and status pin. The t[...]

3.9 Communication 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 55 Check whether it supports ECP (Extended Capabilities Port) feature. Subtest 0 2 IrDA Th is test item supports the transfer rates of 2 . 4 Kb ps, 9.6K bps, 19.2K bps, 38.4Kbps, 57.6Kbps , 115 .2 Kbps , 0.576Mbps,1.152Mbps and 4.00M bps . The uni[...]

3 Diagnostic Programs 3.9 Communication 56 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual Below is the Master Testing window: Press any key to quit when you want to stop Subtest 0 3 L AN C ard This test item is to check whether the module can detect the existence of the network card and display its related information. 1. Device ID D[...]

3.9 Communication 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 57 Subtest 0 5 Pcie Pcie Detection This test item is used to detect Pcie device ID and vendor ID. Only the AboCom ExpressCard 34 GigabitEthernet. device can be detected so far.[...]

3 Diagnostic Programs 3.10 Periph eral 58 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 3.10 Peripheral Subtest 01 Keyboard This test item is to check whether the keyboard works normally. 1. Keyboard Data Line Test Check whether the keyboard data line works normally . 2. Keyboard Led Test Check whether the keyboard led works normall[...]

3.10 Periph eral 3 Diagnostic Prog rams Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 59 At the below screen of Touch Pad test, user can press the left button, right button, and move the mouse to verify its functions for times, and the test will end either by user break or test time is out.[...]

3 Diagnostic Programs 3.1 1Error Codes and Description 60 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 3.11 Error Codes and description The format of ‘ Error Code ’ is ‘ ddxxee ’ , and ‘ dd ’ is the device ID (1~2 chars), ‘ xx ’ is test function ID of device (2 chars), ‘ ee ’ is the error code of device (2 chars[...]

3.1 1Error Codes and Description 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 61 02 Write - Protect Error The ROM BIOS has Physical problems. As above. 03 Base Memory Error Address T he test pattern read out from the base memory is different from the one that has been written in this address. Test this memory[...]

3 Diagnostic Programs 3.1 1Error Codes and Description 62 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 08 RTC Alarm Error The PC speaker's sound source -- - counter/timer 8253 cannot produce corresponding timing signal. As above. 13 PCI Bus Error No PCI. Check the board. 14 PCI Bus Scan Error PCI test fails . As above. 15 PCI [...]

3.1 1Error Codes and Description 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 63 08 Color Purity Test Error Physical problems with the video card or the monitor. Check whether there is any physical problem with the video card or the monitor. 09 VESA Mode 15bits Direct Color Test Error As above. As above. 10 V[...]

3 Diagnostic Programs 3.1 1Error Codes and Description 64 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 30 32bits Video Mode Test Error As above. As above. 31xx Audio 01 Audio Play Fail Cannot play music. Check the Audio connection, replace the external fixture, and repeat the test. 02 Record Fail Cannot record. As above. 11xx LPT 0[...]

3.1 1Error Codes and Description 3 Diagnostic Programs Sat e l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 65 04 Data Line Test Fail Data Line Test fails. As above. 05xx Mouse 01 Touch Pad Test Fail Touch Pad Test Fail Check the mouse connection and repeat the test. 14xx IrDA Test 01 2400BPS Test E rror Failure with the infrared port or [...]

3 Diagnostic Programs 3.1 1Error Codes and Description 66 Sate l lite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual controller 20xx IDE - HDD 01 Get Parameter Fail ! Wrong test parameters are input by user. Reinput the correct parameters. 02 Write Pattern Error HD is damaged. Send the HD for repair. 03 Data Compare Erro r HD is damaged. As abov[...]

3.1 2 Quick Test Item List 3 Diagnostic Programs Satel l ite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual 67 3.12 Quick Test Item List Device Test Items Comment CPU Basic Function ality NPU Basic Functions CPU Information Memory BIOS ROM Cache Memory Bit Stuck High Test 10% or 3 minutes Bit Stuck Low Test 10% or 3 minute s Address Test B oard [...]

Chapter 4 Replacement Procedures 4 1[...]

4 Replacement Procedures 4 - ii Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manua l[...]

4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manua l 4 - iii Chapter 4 Contents 4.1 General ........................................................................................................................ 4 - 1 Safety Precautions ............................................................................[...]

4 Replacement Procedures 4 - iv Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manua l Installing the HDD ................................................................................................ 4 - 26 4.4 Cooling Module ......................................................................................................... 4 - 27[...]

4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manua l 4 - v 4.13 North Bridge Cooling Module and MDC cable ........................................................... 4 - 50 Removing the North Bridge Cooling Module and MDC cable ............................... 4 - 50 Installing the North Bridge Cooling Module and [...]

4 Replacement Procedures 4 - vi Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manua l Figures Figure 4 - 1 Removing the battery pack ..................................................................................... 4 - 8 Figure 4 - 2 Removing the battery pack ............................................................................[...]

4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manua l 4 - vii Figure 4 - 29 Removing the screws from the bottom of the computer ........................................ 4 - 42 Figure 4 - 30 Removing the top cover ...................................................................................... 4 - 43 Figure 4[...]

4.1 General 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 1 4 1 4.1 General This chapter explains how to disassemble the computer and replace Field Replaceable Units (FRUs). Some replacement procedures may not require you to remove all the surrounding FRUs to replace only one FRU. The chart below shows [...]

4 Replacement Procedures 4.1 General 4 - 2 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual[...]

4.1 General 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 3 Safety Precautions Before you begin disassembling, read the following safety precautions carefully. Be sure to follow them while you are working. DANGER: 1. Always use t he genuine batteries or replacement batteries authorized by Toshiba. Batte[...]

4 Replacement Procedures 4.1 General 4 - 4 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual CAUTION: 1. Before r eplacing a component, make sure that the replacement component meets the required specifications. To avoid computer failures, never use components that do not meet the specifications. 2. To avoid internal damage such as sho[...]

4.1 General 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 5 Before You Begin Before you begin disassembling the computer, keep in mind the precautions and advice in this section. Always begin disassembling from removing the AC adapter and battery pack. Remove the optional parts and accessories as well. [...]

4 Replacement Procedures 4.1 General 4 - 6 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual Disassembly Procedures The cable connectors come in these two basic types: ? Pressure plate connectors ? Normal pin connectors To remove a pressure plate connector, pull up the tabs on either side of the connector's plastic pressure plate [...]

4.1 General 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 7 Tools and Equipment For the safety of you and other people in the working environment, it is strongly recommended to use electrostatic discharge (ESD) equipment. The proper use of this equipment will ensure successful repair work and reduce the[...]

4 Replacement Procedures 4.1 General 4 - 8 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual Colors of Screw Shanks For easy identification of the correct screws, the screw shanks are colored according to their lengths, as follows: ? Screws of an even - numbered length Brown ? Screws of an odd - n umbered length White ? Screws of a spe[...]

4.1 General 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 9 Removing the Battery Pack Remove the battery pack according to the following procedures and Figures 4 - 1, 4 - 2. CAUTION : When handling the battery packs, use care not to short circuit the terminals. Do not drop, hi t, twist, or bend the batt[...]

4 Replacement Procedures 4.1 General 4 - 10 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual Figure 4 - 2 Removing the battery pack Installing the Battery Pack Install the battery pack according to the following procedures and Figures 4 - 1, 4 - 2. CAUTION : The battery packs contain a lithium ion battery, which can explode by imprope[...]

4.1 General 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 11 Removing the PCI Express Card Remove the PC I express card according to the following procedures and Figure 4 - 3 , after checking that computer is turned off in bo ot mode. 1. Push the PC I express card to be removed until it stops and releas[...]

4 Replacement Procedures 4.1 General 4 - 12 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual Installing the PC I Express Card I nstall the optional PC I express card according to the following procedures and Figure 4 - 3 , after checking that the computer is turned off in boot mode. 1. Insert the PC I express card gently until it stop[...]

4.1 General 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 13 Removing the Optional PC Card Remove the optional PC card according to the following procedures and Figure 4 - 4 , after checking that computer is turned off in boot mode. CAUTION : Install or remove the PC card correctly, according the manual[...]

4 Replacement Procedures 4.1 General 4 - 14 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual Installing the Optional PC Card Install the optional PC card according to the following procedures and Figure 4 - 4 , after checking that the computer is turned off in boot mode. 1. Insert the PC card gently until it stops and is seated secur [...]

4.1 General 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 15 Removing the Memory Card Remove the memory card according to the following procedures and Figure 4 - 5 , after checking that computer is turned off in boot mode. 1. Open the card cover. 2. Push the memory card to be removed until it stops and [...]

4 Replacement Procedures 4.1 General 4 - 16 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual Installing the Memory Card Install the m e m o ry card according to the following procedures and Figure 4 - 5 , after checking that the computer is turned off in boot mode. 1. Insert the memory card gently until it stops and is seated securely[...]

4.1 General 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 17 Removing the Optional Memory Remove the optional memory (module) according to the following procedures and Figures 4 - 6 and 4 - 7 , afte r checking that the computer is turned off in boot mode. CAUTION : Remove the optional memory after turni[...]

4 Replacement Procedures 4.1 General 4 - 18 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4. Spread out th e two memories lock stoppers so that the memory module can be raised. 5. Pull the memory module up and out at an angle, using care to the connectors. Figure 4 - 7 Removing the optional memory[...]

4.1 General 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 19 Installing the Optional Memory Install the optio nal memory (module) according to the following procedures and Figures 4 - 6 and 4 - 7 , after checking that the computer is turned off in boot mode. CAUTION : Install the optional memory after t[...]

4 Replacement Procedures 4.1 General 4 - 20 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual Removing the MDC Card Remove the MDC Card (Modem Daughter Card) according to the following procedures and Figures 4 - 8 and 4 - 9 , after checki ng that the computer is turned off in boot mode. CAUTION : Remove the MDC card after turning off t[...]

4.1 General 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 21 4. Remove the two M2x 3 wh ite bind screws for securing the MDC card. 5. Raise the MDC card and disconnect it from CN 517 on the system board . 6. Disconnect the MDC cable from the connector J P 1 on the MDC card. Figure 4 - 9 Removing the MDC[...]

4 Replacement Procedures 4.1 General 4 - 22 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual Installing the MDC Card Install the MDC card according to the following procedures and Figures 4 - 8 and 4 - 9 , after checking that the computer is turned off in boot mode. CAUTION : Install the MDC card after turning off the computer. If thi[...]

4.2 Wireless LAN C ard 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 23 4.2 Wireless LAN Card Removing the Wireless LAN Card Remove the wireless LAN card according to the foll owing procedures and Figures 4 - 10 and 4 - 11. CAUTION : Do not touch the connectors on the wireless LAN card and in the comput[...]

4 Replacement P rocedures 4.2 Wireless LAN Card 4 - 24 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual Figure 4 - 11 Removing the wireless LAN card Installing the Wireless LAN Card Install the wireless LAN card acco rding to the following procedures and Figures 4 - 10, 4 - 11. 1. Insert the wireless LAN card into the connector at ang[...]

4.3 HDD 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 25 4.3 HDD Removing the HDD CAUTION : Do not press the top or bottom of the drive. Applying such pressure can corrupt the data in the drive or damage the drive. Remove the HDD (hard disk drive) according to the following p rocedures and Figures 4 - 1[...]

4 Replacement Procedures 4.3 HDD 4 - 26 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual Figure 4 - 13 Removing the HDD pack 4. Remove the HDD pack by pulling the HDD tap attached to the HDD pack. NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or replace the HDD pack only if it failed. 5. Place the HDD [...]

4.3 HDD 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 27 Installing the H DD Install the HDD according to the following procedures and Figures 4 - 12, 4 - 13 and 4 - 14. CAUTION : To avoid damage, always hold the HDD only by its sides. 1. Attach the HDD chassis and connector to the HDD pack. 2. Secure t[...]

4 Replacement Procedures 4. 4 CPU Cooling Module 4 - 28 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4.4 Cooling Module CAUTION: When removing the cooling module, keep the following in mind: The cooling module can become very hot during operation. Be sure to let it cool down before starting the repair work. Do not touch or give sh[...]

4.4 CPU Cooling Module 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 29 Figure 4 - 16 Removing the cooling module Figure 4 - 17 Applying silicon gre ases[...]

4 Replacement Procedures 4. 4 CPU Cooling Module 4 - 30 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual Install Cooling Module Install the c ooling Module according to the following procedures and Figures 4 - 15, 4 - 16 and 4 - 17. CAUTION: When installing the cooling module, keep the following in mind: 1. Be sure to confirm the corr[...]

4 Replacement Procedures 4. 5 CPU 4 - 30 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 1 4.5 CPU Removing the CPU Remove the CPU according to the following procedures and Figures 4 - 18, 4 - 19 and 4 - 10. CAUTION: Remove the CPU by aligning the triangle with the shaded area. NOTE: FOXCONN CPU socket will be 180 degrees to the ri[...]

4. 5 CPU 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Main tenance Manual 4 - 31 Installing the CPU Install the CPU according to the following procedures and Figures 4 - 15. 1. Check that the triangle on the cam is in the unlocking position. 2. Attach the CPU to the correct position in the CPU socket. Align the CPU with the [...]

4 Replacement Procedures 4. 5 CPU 4 - 32 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 3. Fix the CPU by rotating the cam 120 degrees to the right with a flat - blade screwdriver. NOTE: FOXCONN CPU socket will be 180 degrees to the left. Figure 4 - 20 F ixing the CPU[...]

4.6 Speaker cover and Keyboard 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Main tenance Manual 4 - 33 4.6 Speaker Cover and Keyboard Removing the Speaker Cover and Keyboard Remove the Speaker Cover and Keyboard accord ing to the following procedures and Figure 4 - 21, 4 - 22. 1. Release the following 8 latches on the switch[...]

4 Replacement Procedures 4.6 Speaker cover and Keyboard 4 - 34 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual Figure 4 - 22 Removing the keyboard Installing the Speaker Cover and Keyboard Install the s peaker c over and k eyboard according to the following procedures and Figure 4 - 21, 4 - 22. 1. Connect the keyboard cable on main b[...]

4.7 Bluetooth Card 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Main tenance Manual 4 - 35 4.7 Bluetooth Card Removing the Bluetooth Card Remove the B luetooth c ard accord ing to the following procedures and Figures 4 - 23. 1. Disconnect the antenna cable with the tweezers. 2. Disconnect the Bluetooth SUMI - card connector [...]

4 Replacement Procedures 4.7 Bluetooth Card 4 - 36 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual Installing the Bluetooth Card Install the Bluetooth card according to the following procedures and Figures 4 - 23. 1. Connect the Bluetooth SUMI - card to CN3 on the system board and fix Bluetooth card with two M2x3 white flat - head sc[...]

4.9 Display Assembly 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Main tenance Manual 4 - 37 4.8 ODD Bay Module Removing the ODD Bay Module NOTE: The installation and removal procedures are the same for all the modules that can be installed in the ODD bays. See the appropriate sections for the disassembly p rocedures of the [...]

4 Replacement Procedur es 4.8 ODD Bay Module 4 - 38 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual Figure 4 - 25 R emoving the ODD bay module Installing the ODD Ba y Module Install the ODD bay module according to the following procedures and Figure 4 - 24, 4 - 25. 1. Place the ODD bay module in the correct position and slide it in. [...]

4.9 Display Assembly 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Main tenance Manual 4 - 39 Disassembling the ODD Drive NOTE: Do not disassemble the ODD drive when it is working normally. Disassemble or replace the ODD drive only if it failed. Disassemble the ODD drive according to the following procedures and Figures 4 - 2[...]

4 Replacement Procedur es 4.8 ODD Bay Module 4 - 40 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4.9 Display Assembly Removing the Display Assembly CAUTION : U se care to avoid that the antenna cable for antenna is caught between the display assembly and computer . Remove the dis play assembly according to the following procedures[...]

4. 9 Display Assembly 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Main tenance Manual 4 - 41 Figure 4 - 28 Removing the display assembly Installing the Display Assembly Install the display assembly according to the following procedures and Figures 4 - 19, 4 - 20. 1. P lace the display panel in the correct position and p ush[...]

4 Replacement Procedures 4.10 Top Cover 4 - 42 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4.10 Top Cover Removing the Top Cover Remove the top cover according to the following procedures and Figures 4 - 29 and 4 - 30. 1. Turn the computer upside down, and remove the following 15 screws: - T hree M2.5x 8 black flat - head screws [...]

4.10 Top Cover 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 43 Figure 4 - 30 Remov ing t he top cover 3. Disconnect the switch board flat cab le from CN 6. 4. Disconnect the touch pad board flat cable from CN 7. 5. Disconnect the I/O board flat cable from CN 5. 6. Lift up the top cover.[...]

4 Replacement Procedures 4.10 Top Cover 4 - 44 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual I nstalling the Top Cover Install the top cover with the display assembly according to the following procedures and Figure s 4 - 29, 4 - 30. 1. Connect the switch board, touch pad, I/O board flat cables to CN 6, CN7 and CN5 on the system bo[...]

4.11 Sy stem Board, Speaker and MIC, AC - IN, 4 Replacement Procedures RJ11/45, MDC cable Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 45 4.11 S ystem Board, Speaker and MIC , AC - IN, RJ11/45, MDC cable Removing the S ystem Board , Speaker and MIC , AC - IN, RJ11/45, MDC cable NOT E: Be careful of the eject button for the PC [...]

4 Replacement Procedures 4.11 System Board, Speaker and MIC, AC - IN, RJ11/45, MDC cable 4 - 46 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 6. Remove the RJ11/45, AC - IN cable from CN505 , CN3009 , and CN501 . 7. Remove the MDC cable from CN502. Figure4 - 32 Remov ing the RJ - 11/45, AC - IN, MDC cable 8. Remove the L and R spea[...]

4.11 Sy stem Board, Speaker and MIC, AC - IN, 4 Replacement Procedures RJ11/45, MDC cable Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 47 Installing the S ystem Board , Speaker and MIC , AC - IN, RJ11/45, MDC cable Install the S ystem Board , Speaker and MIC , AC - IN, RJ11/45, MDC cable according to the following procedures a[...]

4 Replacement Procedures 4.12 VGA Board 4 - 48 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4.12 VGA Board Removing the VGA Board Rem ove the VGA board according to the following procedures and Figures 4 - 34. 1. Remove three M2.5x4 black flat - head screw. 2. Remove the VGA bracket . 3. Remove the VGA board. Figure 4 - 34 Removin[...]

4.12 VGA Board 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 49 Installing the VGA Board Install the touch pad acco rding to the following procedures and figure 4 - 34. 1. Seat the VGA board to the corrector. 2. S ecure it with VGA bracket and three M2.5x4 black flat - head screws .[...]

4 Replacement Procedures 4.13 North Bridge Thermal Module 4 - 50 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4.13 North Bridge thermal module Removing North Bridge thermal module Remove the n orth b ridge thermal mod ule according to the following procedures and Figure 4 - 35. 1. Disconnect the cable of the n orth b ridge thermal[...]

4.13 North Bridge thermal module 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 51 Installing the Removing North Bridge thermal module Install the Removing North Bridge thermal module according to the following procedures and Figure 4 - 35. 1. Place the north bridge thermal module in the cor rect positio[...]

4 Replacement Procedures 4.14 Display Mask 4 - 52 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4.14 Display Mask Removing the Display Mask Remove the displa y mask according to the following procedures and Figure 4 - 36. 1. Remove the following 4 seals on the display module in that order: - Two black seal s on the bottom - Two bla[...]

4.14 Display Mask 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 53 Installing the Display Mask Install the display mask according to the following procedures and Figure 4 - 36. 1. Place the display mask in the correct position and fasten the following 25 latches, in that order: - Six top latches - F ive[...]

4 Replacement Procedures 4.1 5 FL Inverter Board 4 - 54 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4.15 FL Inverter Board Removing the FL Inverter Board Remove the FL inve rter board according to the following procedures and Figures 4 - 37 and 4 - 38 1. Remove three M2 .5x 4.5 white flat - head screw s . Figure 4 - 37 Removing t[...]

4.15 FL Inverter Board 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 55 Figure 4 - 38 disconnecting the cables Installing the FL Inverter Board Install the FL inverter board according to the following procedures and Figures 4 - 37 and 4 - 38. 1. Conne ct the LCD/FL cable to LCD/FL connecter , and connec[...]

4 Replacement Procedures 4.16 LCD Module 4 - 56 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4.16 LCD Modul es NOTE: ICs are fragile. Use extreme care not to apply pressure to the ICs along the edges of the LCD module. NOTE: Dispose of used LCD panels (fluorescent (FL) tubes) as required by local ordinances or regulations. NOTE: L[...]

4.16 LCD Module 4 Replacement Procedure s Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 57 3. Remove the LCD brackets. 4. Turn the LCD upside down. 5. Remove the tape and LCD/FL cable connector. Then disconnect the LCD/ FL cable. Figure 4 - 40 Removing the 15. 4 - inch LCD module[...]

4 Replacement Procedures 4.16 LCD Module 4 - 58 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual Installing the 15. 4 - inch LCD Module NOTE: LCD/FL cable must be carefully peeled away before disconnecting it from the module . Install the 15. 4 - inch LCD module according to the following p rocedures and Figures 4 - 39, 4 - 40. 1. Tur[...]

4.17 LED board 4 Replacement Procedures Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 59 4.17 I/O Board Removing the I/O Board Remove the I/O board according to the following procedures and Figure 4 - 41. 1. Remove the M2.5x4 black flat - head screw for secur ing the I/O board. 2. Remove the I/O board. 3. Disconnect the SUMI - [...]

4 Replacement Procedures 4.18 Switch Cover and Switch Board 4 - 60 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4.18 Switch Cover and Switch Board Removing the Switch Cover and Switch Board Remove the Switch Cover and Switch Board according to the following procedures and Figure 4 - 42, 4 - 43. 1. Remove the following 6 latch es o[...]

4.18 Switch Cover and Switch board 4 Replacement Procedure s Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 61 Figure 4 - 43 Removing the switch Board Install the Switch Cover and Switch Board Install the switch board according to the following procedures and Figure 4 - 42, 4 - 43. 1. Place the switch board on the correct positi[...]

4 Replacement Procedures 4.19 Touch Pad and Button Board 4 - 62 Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4.19 Touch Pad and Button Board Removing the Touch Pad and Button Board Remove the t ouch p ad and button b oard according to the following procedures and Figure 4 - 44. 1. Disconnect the touch pad flat cables from J1 on th[...]

4.18 Touch Pad and Button Board 4 Replacement Procedure s Satellite M40/M45, TECRA A4, dynabook V x/4 Maintenance Manual 4 - 63 Installing the Touch Pad Board and Button Board Install the Touch Pad Board and Button Board according to the following procedures and Figure 4 - 44. 1. Connect the touch pad flat cables to CN3000 and button board flat cab[...]

6000 1 ? Appendices[...]

Appendices App - ii Satel lite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual[...]

Appendices Satellite M40/M45 TECRA A4 d ynabooK VX/4 Maintenance Manual App - iii Appendix Contents Appendix A Handling the LCD Module .............................................................................. A - 1 Appendix B Board Layout ................................................................................................... B - 1 [...]

Appendices App - iv Satel lite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual C.21 CN511 VGA Card Connector (232 - Pin) ...................... Error! Bookmark not defined. C.22 CN512 USB#2 Connector (6 - Pin) ............................... Error! Bookmark not defined. C.23 C N513 FAN Connector (5 - Pin) ................................... Erro[...]

Appendices Satellite M40/M45 TECRA A4 d ynabooK VX/4 Maintenance Manual App - v[...]

Appendices App - vi Satel lite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual Figures Figure B - 1 Board layout (front) .............................................................................................. B - 1 Figure B - 2 Board layout (back) ............................................................................................[...]

Appendices Satellite M40/M45 TECRA A4 d ynabooK VX/4 Maintenance Manual App - vii Table C - 21 VGA Card Connector (232 - Pin) ................................................................... C - 19 Table C - 22 USB#2 Connector (6 - Pin) ............................................................................ C - 22 Table C - 23 FAN Connector[...]

Apx. A Handling the LCD Module Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual A - 1 Appendix A Appendix A Handling the LCD Module Precautions for handling the LCD module The LCD module can be easily damaged during assembly or disassembly. Observe the following precautions when handling the LCD module: 1. When installing the[...]

Appendices Apx. A Handling the LCD Module A - 2 Satellite M40/M 45 TECRA A4 d ynabook VX/4 Maintenance Manual 3. If the panel’s surface gets dirty, wipe it with cotton or a soft cloth. If it is still dirty, try breathing on the surface to create a light condensate and wipe it again. If the surface is very dirty, we recommend a CRT cleaning agent.[...]

Apx. A Handling the LCD Module Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual A - 3 5. Glass is used in the pan el, so be careful not to drop it or let it strike a hard object, which could cause breakage or cracks. 6. CMOS - LSI circuits are used in the module, so guard against damage from electrostatic discharge. Be sure t[...]

Appendices Apx. A Handling the LCD Module A - 4 Satellite M40/M 45 TECRA A4 d ynabook VX/4 Maintenance Manual 7. Do not expose the module to direct sunlight or strong ultraviolet rays for long periods. 8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freez e, lose their elasticity or otherwise s[...]

Apx. A Handling the LCD Module Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual A - 5 9. Do not disassemble the LCD module. Disassembly can cause malfunctions. 10. If you transport the module, do not use packing material that contains epoxy resin (amine) or silicon glue (alcohol or oxime). These materials can release gas that[...]

Apx. B Board La yout Appendices Satellite M40/M45 TECRA A4 d ynabook Vx/4 Maintenance Manual B - 1 Appendix B Appendix B Board Layout B.1 System Board Front View Figure B - 1 Board layout (front)[...]

Appendices Apx. B Board Layout B - 2 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual F igure B - 2 Board layout ( back )[...]

Apx. C Pin Assignments Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual C - 1 Appendix C C - 3 System Board ......................................................................................................................... C - 3 C.1 CN1 LCD/FL Inverter Connector (42 - Pin) ..............................................[...]

Appendices Apx. C Pin Assignments C - 2 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manua l C.29 CN3003 S - VIDEO Connector (4 - Pin) ..................................................................... C - 30 C.30 CN3004 1394 Connector (4 - Pin) ............................................................................. C - 30 C.31 CN[...]

Apx. C Pin Assignments Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual C - 3 Appendix C Appendix C Pin Assignments System Board C.1 CN1 LCD/FL Inverter Connector ( 42 - Pin) Table C - 1 LCD/FL Inverter Co nnector pin assignments ( 42 - Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 LCM_IDO l 2 LCM_3S_VDDEN O 3 LCM_ID[...]

Appendices Apx. C Pin Assignments C - 4 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manua l C. 3 CN3 Blu etooth Connector (2 0 - Pin) Table C - 3 Blu etooth Connector pin assignments (2 0 - Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 BTRF - E3V - 2 NC - 3 NC - 4 USB_P3+ I/O 5 USB_P3 - I/O 6 NC - 7 NC - 8 BTIFON# I/O 9 NC - 10 G[...]

Apx. C Pin Assignments Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual C - 5 17 1394_L_TPAOP I/O 18 GND I/O 19 SVID_L_LUMA O 20 SVID_L_CHROMA O[...]

Appendices Apx. C Pin Assignments C - 6 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manua l C.6 CN6 P ower Switch & Hotkey Board FFC Connector ( 14 - Pin) Table C - 6 P ower Switch & Hotkey Board FFC Connector pin assignments ( 14 - Pin) 1 +V3 - 2 PWR_ON# I 3 PWR_OLED# O 4 PWR_BLED# O 5 +V5S - 6 SCAN_OUT(1) O 7 SCAN_IN(0) O 8 SCAN[...]

Apx. C Pin Assignments Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual C - 7 Table C - 8 Internal Key board Connector pin assignments ( 34 - Pin) (2/2) 25 SCAN_IN(1) O 26 SCAN_IN(2) O 27 SCAN_OUT(2) I 28 SCAN_OUT(4) I 29 +V5S - 30 NC - 31 NC - 32 NC - 33 NC - 34 +V5S - C. 9 CN 9 Express Card Connector ( 26 - Pin) Table C - 9[...]

Appendices Apx. C Pin Assignments C - 8 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manua l C. 11 CN 500 Battery Connector ( 7 - Pin) Table C - 11 Battery Connector pin assignments ( 7 - Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 GND - 2 BATT_SCL I/O 3 BATT_SDA I/O 4 THRM1 I 5 BATT_OFF I 6 NC - 7 +VPACK I C. 12 CN 501 DC_IN Co[...]

Apx. C Pin Assignments Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual C - 9 17 DVISC I/O 18 NC -[...]

Appendices Apx. C Pin Assignments C - 10 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manua l Table C - 14 DOCKING Connector pin assignments ( 240 - Pin) ( 2 / 5 ) 19 GND - 20 NC - 21 NC - 22 DVITX2+ I/O 23 DVITX2 - I/O 24 DVITX1+ I/O 25 DVITX1 - I/O 26 DVITX0+ I/O 27 DVITX0 - I/O 28 GND - 29 GND - 30 DVITXC+ I/O 31 DVITXC - I/O 32 DVIDET [...]

Apx. C Pin Assignments Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual C - 11 Table C - 14 DOCKING Connector pin assignments ( 240 - Pin) ( 3 / 5 ) 91 NC - 92 NC - 93 NC - 94 NC - 95 NC - 96 NC - 97 GND - 98 NC - 99 NC - 100 NC - 101 GND - 102 NC - 103 NC - 104 NC - 105 GND - 106 NC - 107 NC - 108 NC - 109 GND - 110 NC - 111[...]

Appendices Apx. C Pin Assignments C - 12 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manua l Table C - 14 DOCKING Connector pin assignments ( 240 - Pin) ( 4 / 5 ) 163 NC - 164 NC - 165 GND - 166 NC - 167 NC - 168 NC - 169 GND - 170 NC - 171 NC - 172 NC - 173 GND - 174 NC - 175 +V3_LAN - 176 NC - 177 NC - 178 NC - 179 TD+ I/O 180 TD - I/O [...]

Apx. C Pin Assignments Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual C - 13 Table C - 14 DOCKING Connector pin assignments ( 240 - Pin) ( 5 / 5 ) 235 LED_R3S_LANLINK# I/O 236 DOCDT2# I/O 237 NC - 238 NC - 239 RD+ I/O 240 RD - I/O C . 15 CN 504 Parallel Port Connector ( 25 - Pin) Table C - 15 Parallel Port Connector pin ass[...]

Appendices Apx. C Pin Assignments C - 14 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manua l C. 17 CN 507 External Monitor Connector ( 15 - Pin) Table C - 17 External Monitor Connector pin assignments ( 15 - Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 RED O 2 GREEN O 3 BLUE O 4 NC - 5 GND - 6 GND - 7 GND - 8 GND - 9 +V5S - 10 G[...]

Apx. C Pin Assignments Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual C - 15 Table C - 18 ODD Connector pin assignments ( 50 - Pin) (2/2) 4 1 PIDE_3S_D(6) I /O 42 PIDE_3S_D(10) I/O 4 3 PIDE_3S_D(7) I/O 44 PIDE_3S_D(9) I/O 4 5 PCI_3S_RST# O 46 PIDE_3S_D(8) I/O 4 7 A_CD_GND I/O 48 NC - 4 9 A_CD_L I/O 5 0 A_CD_R I/O C. 19 CN50[...]

Appendices Apx. C Pin Assignments C - 16 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manua l Table C - 19 M emory Slot SO DIMM#1 Connector pin assignments ( 200 - Pin) (2/4) 49 MA_DATA_R(18) I/O 50 MA_DATA_R(22) I/O 51 G ND - 52 GND - 53 MA_DATA_R(19) I/O 54 MA_DATA_R(23) I/O 55 MA_DATA_R(24) I/O 56 MA_DATA_R(28) I/O 57 +V2.5 - 58 +V2.5 -[...]

Apx. C Pin Assignments Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual C - 17 Table C - 19 M emory Slot SO DIM M#1 Connector pin assignments ( 200 - Pin) (3/4) 121 M_CS2# O 122 M_CS3# O 123 NC - 124 NC - 125 GND - 126 GND - 127 MA_DATA_R(32) I/O 128 MA_DATA_R(36) I/O 129 MA_DATA_R(33) I/O 130 MA_DATA_R(37) I/O 131 +V2.5 - 13[...]

Appendices Apx. C Pin Assignments C - 18 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manua l Table C - 19 M emory Slot SO DIMM#1 Connector pin assignments ( 200 - Pin) ( 4 /4) 193 ICH_3S_SMDATA I/O 194 +V3S - 195 ICH_3S_SMCLK I/O 196 GND - 197 +V3S - 198 GND - 199 NC - 200 NC - C. 20 CN5 10 M emory Slot S O DIMM#0 Connector ( 200 - Pin) T[...]

Apx. C Pin Assignments Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual C - 19 Table C - 20 M emory Slot SO DIMM#0 Connector pin as signments ( 200 - Pin) (2/4) 49 MA_DATA_R(18) I/O 50 MA_DATA_R(22) I/O 51 GND - 52 GND - 53 MA_DATA_R(19 ) I/O 54 MA_DATA_R(23) I/O 55 MA_DATA_R(24) I/O 56 MA_DATA_R(28) I/O 57 +V2.5 - 58 +V2.5 -[...]

Appendices Apx. C Pin Assignments C - 20 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manua l Table C - 20 M emory Slot SO DIMM#0 Connector pin assignments ( 200 - Pin) ( 3 /4) 121 M_CS0# O 122 M_CS1# O 123 NC - 124 NC - 125 GND - 126 GND - 127 MA_DATA_R(32) I/O 128 MA_DATA_R(36) I/O 129 MA_DATA_R(33) I/O 130 MA_ DATA_R(37) I/O 131 +V2.5 -[...]

Apx. C Pin Assignments Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual C - 21 Table C - 20 M emory Slot SO DIMM#0 Connector pin assignments ( 200 - Pin) ( 4 /4) 193 ICH_3S_SMDATA I/O 194 GND - 195 ICH_3S_SMCLK I/O 196 GND - 197 +V3S - 198 GND - 199 NC - 200 GND - C. 21 CN 511 VGA Card Connector ( 232 - Pin) Table C - 21 VGA [...]

Appendices Apx. C Pin Assignments C - 22 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manua l Table C - 21 VGA Card Connector pin assignments ( 232 - Pin) ( 2 /4) 53 GND - 54 PEG_C_TXP(13) I/O 55 PEG_C_RXN(12) O 56 GND - 57 PEG_C_RXP(12) O 58 PEG_C_TXN(12) I/O 59 GND - 60 PEG_C_TXP(12) I/O 61 PEG_C_RXN(11) O 62 GND - 63 PEG_C_RXP(11) O 64 [...]

Apx. C Pin Assignments Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual C - 23 Table C - 21 VGA Card Connector pin assignments ( 232 - Pin) ( 3 /4) 125 GND - 126 PEG_C_TXP(1) I/O 127 PEG_C_RXN(0) O 128 GND - 129 PEG_C _RXP(0) O 130 PEG_C_TXN(0) I/O 131 GND - 132 PEG_C_TXP(0) I/O 133 CLK_R_PEG_REF# I/O 134 GND - 135 CLK_R_PEG_[...]

Appendices Apx. C Pin Assignments C - 24 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manua l Table C - 21 VGA Card Connector pin assignments ( 232 - Pin) ( 4 /4) 197 NC - 198 NC - 199 GND - 200 GND - 201 DVITX5 - I/O 202 LVDS_TXDL2 - O 203 DVITX5+ I/O 204 LVDS_TXDL2+ O 205 GND - 206 GND - 207 DVITX4 - I/O 208 LVDS_TXDL1 - O 209 DVITX4+ I/[...]

Apx. C Pin Assignments Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual C - 25 C. 24 CN514 HDD Connector ( 44 - Pin) Table C - 24 HDD Connector pin assignments ( 44 - Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 NC - 2 GND - 3 +V5S - 4 +V5S - 5 GND - 6 HDDASP#_5 I 7 IDE_3S_CS#(1) O 8 IDE_3S_CS#(0) O 9 IDE_3S_A(2) I/[...]

Appendices Apx. C Pin Assignments C - 26 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manua l Table C - 25 PCMCIA Card Connector pin assignment (6 8 - Pin) (2/2) 13 ACARD_3S_PAR I/O 14 ACARD_3S_PERR# I/O 15 ACARD_3S_GNT# I/O 16 ACARD_3S_INT# I/O 17 ACARDVCC - 18 ACARDVP P - 19 ACRD_3S_CLK I/O 20 ACARD_3S_IRDY# I/O 21 ACARD_3S_CBE2# I/O 22 [...]

Apx. C Pin Assignments Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual C - 27 Table C - 26 5 in 1 Card Reader Connector pin assignments ( 44 - Pin) (2/2) 5 SD_WP_SM_CEZ I/O 6 MS_DATA1_SD_ DAT1_SM_D1 I/O 7 MS_DATA0_SD_ DAT0_SM_D0 I/O 8 MS_CLK_SD_ CLK _SM_ELWPZ I/O 9 VCC_MC - 10 MS_BS_SD_ CMD_SM_WEZ I/O 11 MS_DATA3_SD _ DAT3_S[...]

Appendices Apx. C Pin Assignments C - 28 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manua l 11 NC - 12 NC - Table C - 27 MDC Connector p in assignments ( 30 - Pin) ( 2 /2) 13 NC - 14 NC - 15 GND - 16 MDC - 17 MDC - 18 NC - 19 GND - 20 GND - 21 NC - 22 AC97_3S_SYNC I/O 23 AC97_3S_SDOUT I/O 24 AC97_3S_SDIN1 I/O 25 AC97_3S_RST# I/O 26 AC97_[...]

Apx. C Pin Assignments Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual C - 29 41 PCI_3S_AD(25) I/O 42 PCI_3S_AD(28) I/O Table C - 28 MINI PCI Con nector pin a ssignments ( 124 - Pin) (2/3) 43 NC - 44 PCI_3S_AD(26) I/O 45 PCI_3S_CBE#(3) I/O 46 PCI_3S_AD(24) I/O 47 PCI_3S_AD(23) I/O 48 PCI_3S_AD(20) I/O 49 GND - 50 GND - 51 PC[...]

Appendices Apx. C Pin Assignments C - 30 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manua l 111 NC - 112 NC - 113 GND - 114 GND - Table C - 28 MINI PCI Con nector pin assignments ( 124 - Pin) ( 3 /3) 115 NC - 116 NC - 117 GND - 118 GND - 119 GND - 120 GND - 121 NC - 122 NC - 123 NC - 124 GND - C. 29 CN3003 S - VIDEO Connector ( 4 - Pin) [...]

Apx. C Pin Assignments Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual C - 31 C. 32 CN3006 USB/B Connector ( 20 - Pin) Table C - 32 USB/B Connector pin assignments ( 20 - Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 SVID_L_ CHROMA_DB O 2 SVID_L_ LUMA_DB O 3 GROUND_USB - 4 1394_L_TPA0P_DB I /O 5 1394_L_TPA0N_DB I/O [...]

Appendices Apx. C Pin Assignments C - 32 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manua l C. 35 JACK501 Headphone Connector (6 - Pin) Table C - 35 Headphone Connector pin assignments (6 - Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 GND - 2 SPK_OUT_L+ O 3 SPK_OUT_R+ O 4 GND - 5 GND - 6 +VAUDIO_5S -[...]

Keyboard Scan/Character Codes Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual D - 1 Apx. D Keyboard Scan/Character Codes Appendix D Keyboard Scan/Character Codes Table D - 1 Scan codes (set 1 and set 2) (1/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note 01 ‘ ~ 29 A9 0E F0 0E 02 1 ! 02 82 16 F0 16 03 2 @ [...]

Appendices Keyboard Scan/Character Codes D - 2 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual Table D - 1 Scan codes (set 1 and set 2) (2/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note 29 | 2B AB 5D F0 5D *5 30 Caps Lock 3A BA 58 F0 58 31 A 1E 9E 1C F0 1C 32 S 1F 9F 1B F0 1B 33 D 20 A0 23 F0 23 34 F 21 A1 2B F0 2[...]

Keyboard Scan/Character Codes Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual D - 3 Table D - 1 Scan codes (set 1 and set 2) (3/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Brea k Note 58 Ctrl 1D 9D 14 F0 14 *3 60 Alt (L) 38 B8 11 F0 11 *3 61 Space 39 B9 29 F0 29 62 ALT (R) E0 38 E0 B8 E0 11 E0 F0 11 75 Ins E0 52 [...]

Appendices Keyboard Scan/Character Codes D - 4 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual Table D - 1 Scan codes (set 1 and set 2) (4/4) Cap Code set 1 Code set 2 No. Keytop Make Break Make Break Note 122 F11 57 D7 78 F0 78 *3 123 F12 58 D8 7 F0 7 *3 124 PrintSc *6 *6 *6 *6 *6 126 Pause *7 *7 *7 *7 *7 202 Fn — — — — *4 203[...]

Keyboard Scan/Character Codes Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual D - 5 Table D - 2 Scan codes with left Shift key Code set 1 Code set 2 Cap No. Key top Make Break Make Break 55 / E0 AA E0 35 E0 B5 E0 2A E0 F0 12 E0 4A E0 F0 4A E0 12 75 INS E0 AA E0 52 E0 D2 E0 2A E0 F0 12 E0 70 E0 F0 70 E0 12 76 DEL E0 AA E0 53 [...]

Appendices Keyboard Scan/Character Codes D - 6 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual Table D - 3 Scan codes in Numlock mode Code set 1 Code set 2 Cap No. Key top Make Break Make Break 75 INS E0 2A E0 52 E0 D2 E0 AA E0 12 E0 70 E0 F0 70 E0 F0 12 76 DEL E0 2A E0 53 E0 D3 E0 AA E0 12 E0 71 E0 F0 71 E0 F0 12 79 ? ? E0 2A E0 4B E0[...]

Keyboard Scan/Character Codes Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual D - 7 Table D - 5 Scan codes in overlay mode Code set 1 Code set 2 Cap No. Keytop Make Break Make Break 08 7 (7) 47 C7 6C F0 6C 09 8 (8) 48 C8 75 F0 75 10 9 (9) 49 C9 7D F0 7D 11 0 (*) 37 B7 7C F0 7C 23 U (4) 4B CB 6B F0 6B 24 I (5) 4C CC 73 F0 73 [...]

Appendices Keyboard Scan/Character Codes D - 8 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual Table D - 7 No.126 key scan code Code set 1 Code set 2 Key top Shift Make Make Pause Common* E1 1D 45 E1 9D C5 E1 14 77 E1 F0 14 F0 77 Ctrl* E0 46 E0 C6 E0 7E E0 F0 7E *: This key generates only make codes.[...]

Apx. E Key Layout Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual E - 1 Apx. E Key Layout Appendix E Key Layout E.1 United States (US) Keyboard F igure E - 1 US keyboard E.2 J apan ( JP ) Keyboard F igure E - 2 J P keyboard[...]

Appendices Apx E Key Layout E - 2 Satellite M40/M45 T ECRA A4 d ynabook VX/4 Maintenance Manual E.3 Spanish ( SP ) Keyboard F igure E - 3 SP keyboard E.4 Korean ( KR ) Keyboard F igure E - 4 KR keyboard[...]

Apx.E Key La yout Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual E - 3 E.5 Canadian - French ( CF ) Keyboard F igure E - 5 CF keyboard E.6 French ( FR ) Keyboard F igure E - 6 FR keyboard[...]

Appendices Apx E Key Layout E - 4 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual E.7 German ( GR ) Keyboard F igure E - 7 GR keyboard E.8 Italian ( IT ) Keyboard F igure E - 8 IT keyboard[...]

Apx E Key Layout Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual E - 5 E.9 Taiwan ( TC ) Keyboard F igure E - 9 TC keyboard E.10 Portuguese ( PT ) Keyboard F igure E - 11 PT ke yboard[...]

Appendices Apx E Key Layout E - 6 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual E.11 DU, UE, US International ( USE ) Keyboard F igure E - 12 USE keyboard E.12 Arabic ( AR ) Keyboard F igure E - 13 AR keyboard[...]

Apx E Key Layout Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual E - 7 E.13 Belgian ( BE ) Keyboard F igure E - 14 BE keyboard E.14 Russian ( RU ) Keyboard F igure E - 15 RU keyboard[...]

Appendices Apx E Key Layout E - 8 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual E.15 Swiss/Switzerland ( SL ) Keyboard F igur e E - 16 SL keyboard E.16 Swedish ( SW ) Keyboard F igure E - 17 SW keyboard[...]

Apx E Key Layout Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual E - 9 E.17 Norwegian ( NO ) Keyboard F igure E - 18 NO keyboard E.18 Danish ( DK ) Keyboard F igure E - 19 DK keyboard[...]

Appendices Apx E Key Layout E - 10 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual E.19 Turkey ( TR ) Keyboard F igure E - 18 TR keyboard E.20 Greek ( GK ) Keyboard F igure E - 19 GK keyboar d[...]

Apx E Key Layout Appendices Satellite M40/M45 TEC RA A4 d ynabook VX/4 Maintenance Manual E - 11 E.21 Estonia ( ES ) Keyboard F igure E - 19 ES keyboard E.22 Herbrew ( HE ) Keyboard F igure E - 19 HE keyboard[...]

Appendices Apx E Key Layout E - 12 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual E.23 Czech ( CZ ) Keyboard F igure E - 18 CZ keyboard E.24 Lithuanian ( LI ) Keyboard F igure E - 18 LI keyboard[...]

Apx E Key Layout Appendices Satellite M40/M45 TEC RA A4 d ynabook VX/4 Maintenance Manual E - 13 E.25 Hungary ( HU ) Keyboard F igure E - 18 HU keyboard E.26 Slovakia ( SA ) Keyboard F igure E - 18 SA keyboard[...]

Appendices Apx E Key Layout E - 14 Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual E.27 Yugoslavia ( YU ) Keyboard F igure E - 19 YU keyboard[...]

Apx. F BIOS Rewrite Procedures Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual F - 1 Appendix G Appendix F BIOS Rewrite Procedures This Appendix explains how to rewrite the system BIOS program when you update the system BIOS. Tools To rewrite the BIOS, you need the following tool: ? BIOS/EC/KBC rewriting disk for the compute[...]

Apx. G EC/KBC Rewrite Procedures Appendices Satellite M40/M45 TECRA A4 d ynabook VX/4 Maintenance Manual G - 1 Appendix H Appendix G EC/KBC Rewrite Procedures This Appendix explains how to rewrite the EC/KBC system program when you update the EC/KBC system. Tools To rewrite the EC/KBC , you need the following tool: ? BIOS/EC/KBC rewriting dis k for[...]

Appendices Apx . H EC/KBC Rewrite Procedures H - 2 TE2 1 00 Manual Manual Note: 1. Rewrite the EC/KBS only when instructed by a diagnostic disk release 1 no tice. 2. Connect the AC adapter to the computer when you rewrite the EC/KBC. 3. Do not turn off the power while you are rewriting the EC/KBC. If the rewrite fail s , it might be impossible to s[...]