TP-Link TD-8816 Bedienungsanleitung

TD-8816 ADSL2+ Modem Router Rev:3.1.0 1910010870[...]

COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other br ands and product names are trademarks or registered trademarks of t heir respective holders. No part of the specificat ions may be reproduced in any form or b y any means or used to make any derivativ[...]

FCC STATEMENT This equipment has been tested and found to comply wi th the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limit s are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment ge nerates, uses and can radiate radio frequency energy and, if [...]

Safety Information  When product has power button, the power butto n is one of the way to shut off the product; when there is no power button, the only way to co mpletely shut off power is to disconnect the product or the power adapter from the power source.  Don’t disassemble the product, or make repairs yourself. You run the risk of elect[...]

DECLARA TION OF CONFORMITY For the following equipment: Product Description: ADSL2+ Modem Router Model No.: TD-8816 T rademark: TP-LINK We declare under our own respon sibility that the above products satisfy all the technical regulations applicable to the product with in the scope of Council Directives: Directives 2004 / 108 / EC, Directives 2 006[...]

CONTENTS Package Contents .................................................................................................... 1 Chapter 1. Introduction ........................................................................................ 2 1.1 Product Overview .....................................................................................[...]

4.5.6 CWMP ............................................................................................................................ 50 4.6 Maintenance ............................................................................................................ 51 4.6.1 Administration ..............................................................[...]

TD-8816 ADSL2+ Modem Router User Guide 1 Package Contents The following items should be found in your package:  One TD-8816 ADSL2+ Modem Router  One Power Adapter for TD-8816 ADSL2+ Modem Router  Quick Installation Guide  One RJ45 cable  Two RJ11 cables  One ADSL splitter  One Resource CD , including:  This User Guide  Ot[...]

TD-8816 ADSL2+ Modem Router User Guide 2 Chapter 1. Introduction Thank you for choosing the TD-8816 ADSL2+ Modem Router . 1.1 Product Overview The device is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet network. The Modem Router is easy to use. Connect the TD-8816 to a n Ethernet LAN or computers vi[...]

TD-8816 ADSL2+ Modem Router User Guide 3  Supports Multiple PVC (Per manent Virtual Circuit).  Built-in DHCP server.  Built-in firewall, supports IP/MAC filter, Application filter and URL filter.  Supports Virtual Server, DMZ host and IP Address Mapping.  Supports Dynamic DNS, UPnP and Static Routing.  Supports system log and flow[...]

TD-8816 ADSL2+ Modem Router User Guide 4 Chapter 2. Hardware Installation 2.1 The Front Panel Figure 2-1 The LEDs locate on the front panel, which indicate the device’s working status. For details, please refer to LED Explanation . LED Explan ation: Name Status Indication On The modem router is powered on. Power Off The modem router is off. Pl ea[...]

TD-8816 ADSL2+ Modem Router User Guide 5 2.2 The Back Panel Figure 2-2  ON/OFF : The switch for the power.  POWER : The Power plug is where yo u will connect the power adapter.  RESET : There are two ways to reset the modem router's factory defaults. Method one: With the modem router powered on, us e a pin to press and hold the Reset [...]

TD-8816 ADSL2+ Modem Router User Guide 6 Figure 2-4 W all-mount Install  Note: The diameter of the screw, 4mm<D<7.5mm, and the distance of two sc rews is 111.5mm. The screw that project from the wall need around 4m m based, and t he length of the screw need to be at least 20mm to withstand t he weight of the product. 2.4 Connecting the Rou[...]

TD-8816 ADSL2+ Modem Router User Guide 7 TD-8816. Connect the other end to the MO DEM port of the external splitter. Step 2: Conn ect the Ethernet cable. Attach one end of a network cable to your computer’s Ethernet port or a regular hub/switch port, and the other end to the LAN port on the TD-8816. Step 3: Attach the power adapter. Connect the p[...]

TD-8816 ADSL2+ Modem Router User Guide 8 Chapter 3. Quick Installation Guide 3.1 TCP/IP Configuration The default IP address of the TD-8816 ADSL2+ Modem Router is 192.16 8.1.1. And the default Subnet Mask is 255.255.255.0. These values can be changed as you des ire. In this guide, we use all the default values for description. Connect the local PC [...]

TD-8816 ADSL2+ Modem Router User Guide 9 Figure 3-2 You can check it follo wing the steps below: 1) Is the connection between your PC and the modem router correct? The LEDs of LAN port which you link to the dev ice and the LEDs on y our PC's adapter should be lit. 2) Is the TCP/IP configuration for y our PC correct? If the modem router's [...]

TD-8816 ADSL2+ Modem Router User Guide 10 Click the NEXT button. Figure 3-8 Step 2: Configur e the time for the m odem router, and then click the NEXT button. Figure 3-9 Step 3: Select the connection type to c onnect to the ISP (We select PPPoE/PPPoA mode for example here), and then click the NEXT button. Figure 3-10 Step 4: Configur e the followin[...]

TD-8816 ADSL2+ Modem Router User Guide 11 Figure 3-1 1 Step 5: Click NEXT to finish the Quick Start. Figure 3-12[...]

TD-8816 ADSL2+ Modem Router User Guide 12 Chapter 4. Software Configuration This User Guide recommends using the “Quick Installation Guide” for first-time installation. For advanced users, if you want to know more abo ut this device and make use of its functions adequately, maybe you will get help from this chapter to configur e the advanced se[...]

TD-8816 ADSL2+ Modem Router User Guide 13 Figure 4-2 4.1.2 System Log Choose “ Status → System Lo g ” menu, and you will be able to query the logs of the Modem Router.[...]

TD-8816 ADSL2+ Modem Router User Guide 14 Figure 4-3 The modem router can keep logs of all traffic. Y ou can query the logs to find what happened to the modem router. Click the CLEAR LOG button to clear the logs. Click the SAVE LOG button to save the logs. 4.1.3 Statistics Choose “ Status → Statistics ” menu, and you will be able to view the [...]

TD-8816 ADSL2+ Modem Router User Guide 15  Select Ethernet , and you will see the statistics table as below. Statistics Table: Transmit Frames The frames transmitted over the Ethernet port. Transmit Multicast Frames The multicast frames transmitted over the Ethernet port. Transmit total Bytes The total bytes transmitted over the Ethernet port. T[...]

TD-8816 ADSL2+ Modem Router User Guide 16 4.2 Quick S t art Please refer to 3.2 Login . 4.3 Interface Setup Choose “ Interface Setup ”, you can see the next submenus: Internet and LAN . Figure 4-5 Click any of them, and you will be able to configure the corre sponding function. 4.3.1 Internet Choose “ Interface Setup → Internet ” menu, yo[...]

TD-8816 ADSL2+ Modem Router User Guide 17 Figure 4-6  ATM VC: ATM settings are used to connect to your ISP. Your ISP provides VPI (Virtual Path Identifier), VCI (Virtual Channel Identifier) settings to you. In th is Device, you can totally setup 8 VCs on different encapsulations, if you apply 8 di fferent virtual circuits from your ISP. You need[...]

TD-8816 ADSL2+ Modem Router User Guide 18  VCI: Identifies the virtual channel endpoints in an ATM network. The valid range is from 32 to 65535 (1 to 31 is reserved for well- known protocols). Pl ease input the value provided by your ISP.  QoS: Select the Quality of Service types for th is Virtual Circuit, in cluding CBR (Constant Bit Rate), [...]

TD-8816 ADSL2+ Modem Router User Guide 19  TCP MTU Option: Enter the TCP MTU as your desire. The default value is 1500.  IPv4 Address: If you select IPv4 as IP version, you should configure the following.  NAT: Select this option to Enable/ Disable the NAT (Network A ddress Translation) function for this VC. The NAT function can be ac tiva[...]

TD-8816 ADSL2+ Modem Router User Guide 20 Figure 4-8  Note: Each IP address entered in the fields must be in t he appropriat e IP form, which is four IP octets separated by a dot (x.x.x.x), su ch as 192.168.1.100. The Modem Router will not accept the IP address if it is not in this format. 3. PPPoA/PPPoE Select this option if your ISP requires y[...]

TD-8816 ADSL2+ Modem Router User Guide 21 Figure 4-9  Service name: Specify a name for the PPPoA/PPPoE connection for recognition.  Username: Enter your username for your PPPoA/ PPPoE connection to identify and verify your account to the ISP.  Password: Enter your password for your PPPoA/PPPoE connection.  Encapsulation: For both PPPoA/[...]

TD-8816 ADSL2+ Modem Router User Guide 22 or given by your ISP. For Static IP, you need to specify the IP address, Subnet Mask and Gateway IP address.  Dual Stack Line: Enable the Dual Stack Lite( D-S Lite ) function if you need. It is disabled by default. 4. Bridge Mode If you select this type of connection, the modem router can be configured t[...]

TD-8816 ADSL2+ Modem Router User Guide 23 Figure 4-1 1  IP Common Option: Configure the IP common option here.  Encapsulation: Select the encapsulation mode for the Dy namic IP Address, you can leave it default.  Bridge Interface: Activate the option, t he modem router can also work in Bridge mode.  Default Route: If enable this functio[...]

TD-8816 ADSL2+ Modem Router User Guide 24 Figure 4-12  Note: Each IP address entered in the fields must be in the appropriate IPv6 form, which is eight IP octets separated by a colon (x:x:x:x :x:x:x:x). The modem router will not accept the IP address if it is not in this format. 3. PPPoA/PPPoE Select this option if your ISP requires you to use a[...]

TD-8816 ADSL2+ Modem Router User Guide 25 Figure 4-13  Service name: Specify a name for the PPPoA/PPPoE connection for recognition.  Username: Enter your username for your PPPoA/ PPPoE connection to identify and verify your account to the ISP.  Password: Enter your password for your PPPoA/PPPoE connection.  Encapsulation: For both PPPoA[...]

TD-8816 ADSL2+ Modem Router User Guide 26 enable the function, please click Enable .  MLD Proxy: The MLD (Multicast Listener Discovery Prot ocol) Proxy function is disabled by default. If you want to enable the function, please click Enable .  Dual Stack Lite: Enable the Dual Stack Lite (D-S Lite) function if you need. It is disabled by defau[...]

TD-8816 ADSL2+ Modem Router User Guide 27 Figure 4-15  Router Local IP: These are the IP settings of the LA N interface for the device. These settings may be referred to as Private se ttings. You may change the LAN IP addres s if needed. The LAN IP address is private to y our internal networ k and cannot be seen on the Internet.  IP Address: [...]

TD-8816 ADSL2+ Modem Router User Guide 28 means the ADSL modem router will only accept but will not send RIP packet. OUT only means the ADSL modem router will only send but will not accept RIP packet.  Multicast: Select IGMP version, or disable the function. IGMP (Internet Group Multicast Protocol) is a session-layer pr otocol used to establish [...]

TD-8816 ADSL2+ Modem Router User Guide 29 secondary DNS IP to 0.0.0.0. If you want to use DNS relay, you can setup DNS server IP to 192.168.1.1 on their Computer. If not, t he device will perform as no DNS relay.  Primary DNS Server: Type in your preferred DNS server.  Secondary DNS Server: Type in your preferred DNS server.  Radvd Enable:[...]

TD-8816 ADSL2+ Modem Router User Guide 30 4.4 Advanced Setup Choose “ Advanced Setup ”, you can see the next submenus: Figure 4-18 Click any of them, and you will be able to configure the corre sponding function. 4.4.1 Firewall Choose “ Advanced Setup → Firew all ” menu, and you will see the next screen (shown in Figure 4-19 ). Figure 4-1[...]

TD-8816 ADSL2+ Modem Router User Guide 31 Figure 4-20 Click ADD ROUTE button to add a new route in the next screen (shown in Figure 4-21 ). Figure 4-21  Destination IP Address: This parameter specifies the IP network address of the final destination.  IP Subnet Mask: Enter the subnet mask for this destination.  Gateway IP Address: Enter th[...]

TD-8816 ADSL2+ Modem Router User Guide 32 Figure 4-22  Virtual Circuit: Select the Virtual Circuit Index that you plan to setup for the NAT function.  NAT Status: This field shows the current statu s of the NAT function for the current VC. You can go to the previous screen (shown in Figure 4-6 ) to activate the function.  Number of IPs; Th[...]

TD-8816 ADSL2+ Modem Router User Guide 33 The Virtual Server is the server or server(s) behind NAT (on the LAN), for example, Web server or FTP server, that you can make visible to t he outside world even though NAT makes your whole inside network appear as a single machine to the outside world. Figure 4-24  Rule Index: The Virtual server rule i[...]

TD-8816 ADSL2+ Modem Router User Guide 34 Click the BACK button to return to the previous screen. Click the CANCEL button to cancel the configur ation which is made just now. 4.4.3.3. IP Address Mapping Choose “ Advanced Set up → NAT → IP Address Mapping ” in Figure 4-22 , you can con figure the Address Mapping Rul e in the next screen. The[...]

TD-8816 ADSL2+ Modem Router User Guide 35  Public Start & End IP: Enter the public IP Address you want to do NAT. Public Start IP is the starting public IP address and Pub lic End IP is the ending public IP address. If you have a dynamic IP, enter 0.0.0.0 as the Public Start IP.  Address Mapping List: This displays the informati on about [...]

TD-8816 ADSL2+ Modem Router User Guide 36 Figure 4-27  QoS: Select this option to Activa te/Deactivate the QoS.  Summary: Click the button to view t he configurations of QoS.  Rule: Configure the rules for QoS. If the traffic complies with the rule, then the modem router will take the corresponding action to deal with it.  Rule Index: S[...]

TD-8816 ADSL2+ Modem Router User Guide 37 Vlans.  IPP/DS Field: Select the type of the action to assign the priority. When you select IPP/TOS, you can assign the prio rity via IP informati on. IP QoS function is intended to deliver guaranteed as well as different iated Internet services by giving network resource and usage control to the Network[...]

TD-8816 ADSL2+ Modem Router User Guide 38 he rule. the rule. iori t y via DHCP (the header of IP group). It maps ure the action that the modem router takes to deal with the traffic which accord the DSCP priority.  Queue #: Select the priority type for the action. ment, ba ndwidth allocation and resource ical switch port is configured with an acc[...]

TD-8816 ADSL2+ Modem Router User Guide 39 Figure 4-30  VLAN Index: Select the VLAN index for this VC. You can specify 8 gr oups in maximum.  VLAN ID: This indicates the VLAN group.  ATM VCs: Select the ATM VCs as members of VLAN , and if you leave the Tagged blank, the tag in frames will be deleted wh en transmitted from the VC.  Ethern[...]

TD-8816 ADSL2+ Modem Router User Guide 40 4.4.6 ADSL Choose “ Advanced Setup → ADSL ”, you can select the ADSL Type and ADSL Mode in the next screen. The ADSL feature can be selected when you meet the physi cal connection problem. Please check the proper settings with your Internet service provider. Figure 4-32  ADSL Mode: Select the ADSL [...]

TD-8816 ADSL2+ Modem Router User Guide 41 Figure 4-34  ACL: If Activated , the IP addresses which are contained in the Access Control List can access to the modem router. If Deactivated , all IP addresses can access to the modem router.  ACL Rule Index: Select the ACL rule index for the entry.  Active: Enable the ACL rule.  Secure IP Ad[...]

TD-8816 ADSL2+ Modem Router User Guide 42 Figure 4-35  Filter Type Selection: Select the fil ter type fo r the next configuration.  IP/MAC Filter Set Index: Select the Set index for the IP Filter entry. This index can match with six IP / MAC Filter Rule Indexes.  Interface: Select the interface for the entry.  Direction: Select the dire[...]

TD-8816 ADSL2+ Modem Router User Guide 43  Note: You should set the IP/MAC Filter Set Index and IP/MAC Filter Rule Inde x together to appoint the address (shown in the Filter List) for the IP Filter rule. For example, (1, 2), it means the rule will be shown in the row 2 for the matching with 1.  Rule Type: For IP Filter, please select IP here[...]

TD-8816 ADSL2+ Modem Router User Guide 44  Note: If you want to make the rule take ef fect, please select Ye s to active the rule. Step 3: Enter the “Source IP Address”, “Destinat ion IP Address”, “Subnet Mask” and “Port Number” in the corresponding field. Step 4: Select the Protocol as “TCP” and se lect the Unmatched rule as[...]

TD-8816 ADSL2+ Modem Router User Guide 45 Figure 4-36  Rule Type: Select MAC for the MAC Filter rule.  Active: Select “Yes” to make t he rule to take effect.  MAC Address: Enter the MAC address for the rule.  Rule Unmatched: If the current rule can not match, and you select For w ard , the modem router will skip the rule and tr ansm[...]

TD-8816 ADSL2+ Modem Router User Guide 46  Note: If you want to make the rule take ef fect, please select Ye s to active the rule. Step 3: Enter the “MAC Address” and select the Unmatched rule as “N ext”. Step 4: Finally, click the SAVE to save the entry. Step 5: Go to Step 2 to configure the next rule: Block the PC with MAC address 00-0[...]

TD-8816 ADSL2+ Modem Router User Guide 47 Figure 4-37  Filter Type Selection: Select the Application Filter for the next configuration.  Application Filter: Activate or deactivate the function.  ICQ & MSN & YMSG & Real Audio/Video: Select Allow or Den y for these applications. If you select Allow, the modem router will acc ept [...]

TD-8816 ADSL2+ Modem Router User Guide 48 Figure 4-38  Filter Type Selection: Select the URL Filter fo r the next configuration.  Active: Select “Yes” to make the rule take effect.  URL Index: Select the index for the URL Filter entry.  URL: Enter the URL for this URL Filter.  URL Filter Listing: This displays the informati on ab[...]

TD-8816 ADSL2+ Modem Router User Guide 49 Figure 4-39  SNMP: Activate or deactivate the function.  Get Community: Select to set the password for the incoming Get requests from the management station.  Set Community: Select to set the password fo r incoming Set requests from the management station.  Trap Host: Enter the trap host here. 4[...]

TD-8816 ADSL2+ Modem Router User Guide 50 4.5.5 DDNS Choose “ Access Management → DDNS ”, you ca n configure the DDNS function in the screen (shown in Figure 4-41 ). The modem router offers a Dy namic Domain Name System ( DDNS ) feature. The feature lets you use a static host name with a dynamic IP address. Users should type the host name, us[...]

TD-8816 ADSL2+ Modem Router User Guide 51 Figure 4-42  CWMP: Select to activate the CWMP f unction.  URL: Enter the website of ACS which is provided by your ISP.  User Name/Passwo rd: Enter the user name and password to login the ACS server.  Path: Enter the path that connects to the ACS server.  Port: Enter the port that connec ts t[...]

TD-8816 ADSL2+ Modem Router User Guide 52 Figure 4-44  Note: 1) There is only one account that can access Web-Management interface. The default account is "admin", and the default password is "adm in". Admin has read/write access privilege. 2) When you change the password, you should enter the new password twice, and then cli[...]

TD-8816 ADSL2+ Modem Router User Guide 53  Note: The ADSL modem router builds in some NTP Se rvers, when the modem router connect s to the Internet, the modem router will get the system ti me automatically from the NTP Server . Y ou can also configure the NTP Server address automatically , and then the modem router will get the time from the spe[...]

TD-8816 ADSL2+ Modem Router User Guide 54 hard drive of the computer. Click Brow se to find the local hard drive and locate the firmware or romfile to be used for upgrade. Figure 4-48 To upgrade the modem router's firmware , follow these instructions below: Step 1: Downl oad a more recent firmware upgr ade file from the TP-LINK website ( www.t[...]

TD-8816 ADSL2+ Modem Router User Guide 55 Figure 4-49 Step 2: Save the file as the appointed file (shown in Figure 4-50 ). TD-8816 Figure 4-50 To restore the modem router’s settings: Step 1: Click the Brow se button to locate the update file for the device, or enter the exact path in “New Romfile Location” field. Step 2: Click the UPGRADE but[...]

TD-8816 ADSL2+ Modem Router User Guide 56 Figure 4-51 4.6.5 Diagnostics Choose “ Maintenance → Diagnostics ”, you can vi ew the test res ults for the conn ectivity of the physical la yer and protoco l layer for both LA N and WAN sides i n the screen (shown in Figure 4-5 2 ). Figure 4-52 4.7 Help Choose “ Help ”, you can view the help info[...]

TD-8816 ADSL2+ Modem Router User Guide 57 Figure 4-53  Note: Click the tab, and you will be able to get the corresponding information.[...]

TD-8816 ADSL2+ Modem Router User Guide 58 AppendixA: Specifications General Standards and Protocols ANSI T1.413, ITU G.992.1, ITU G. 992.2, ITU G.992.3, ITU G.992.5 IEEE 802.3, IEEE 802.3u, TCP/IP, PPPoA , PPPoE, SNTP, HTTP, DHCP, ICMP, NAT,CWMP Safety & Emission FCC, CE Ports 1 10/100M Auto-Negotiation RJ45 port （ Auto MDI/MDIX) 1 RJ11 port [...]

TD-8816 ADSL2+ Modem Router User Guide 59 Appendix B: Configuring the PC In this section, we’ll introduce how to install and configure the TCP/IP corr ectly in Windows XP. First make sure your Ethernet Adapter is worki ng, refer to the adapter’s manual if necessary. 1. Configure TCP/IP component 1) On the Windows taskbar, click the Start button[...]

TD-8816 ADSL2+ Modem Router User Guide 60 Figure B-2 5) The following TCP/IP Properties window will display and the IP Address tab is open on this window by default. Now you have two ways to configure the TCP/IP protocol below:  Setting IP address automatically Select Obtain an IP address automatically , Choose Obtain DNS server automatically , [...]

TD-8816 ADSL2+ Modem Router User Guide 61 Figure B-3  Note: For Windows 98 OS or before, the PC and Modem Router may need to be restarted.  Setting IP address manually 1 Select Use the following IP address radio button. And the fo llowing items available 2 If the modem router's LAN IP address is 192.168.1. 1, specify the IP address as 19[...]

TD-8816 ADSL2+ Modem Router User Guide 62 Figure B-4 Now: Click OK to keep your settings.[...]

TD-8816 ADSL2+ Modem Router User Guide 63 Appendix C: Troubleshooting T1. How do I restore m y modem router’s configuration to its f actory default settings? With the modem router powered on, press and hold the RESET button on the rear pan el for 8 to 10 seconds before releasing it.  Note : Once the modem router is reset, the current c onfigur[...]

TD-8816 ADSL2+ Modem Router User Guide 64 d) Select Obtain an IP address automatically and Obtain DNS server address automatically . Then click OK . For Windows 8 a) Move your mouse to the lowe r right corner and you will see Search icon in the Popups. Go to “ -> Apps ”. Type Control Panel in the search box and press Enter , then you will go[...]

TD-8816 ADSL2+ Modem Router User Guide 65 Now, try to log on to the Web-based configur ation page again after the above settings have been configured. If you still cannot acce ss the configuration page, please restore your modem router’s factory default settings and re configure your modem router follow ing the instructions in 3.2 Login . Please [...]

TD-8816 ADSL2+ Modem Router User Guide 66 Appendix D: Technical Support Technical Support  For more troubleshooting help, go to: www.tp-link .com/support/faq  T o download the latest Firmware, Driver , Utility and User Guide, go to: www.tp-link .com/support/download  For all other technical support, please c ontact us b y using the followi[...]