TP-Link TL-WR702N Bedienungsanleitung

TL-WR702N 150Mbps Wireless N Nano Router Rev: 1.1.0 1910010880[...]

COPYRIGHT & TRADEMARKS S pecifications ar e subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., L TD. Other brands and product names are trademarks or registered trademarks of t heir respective holders. No part of th e specifications ma y be reproduced in any form or by any means or used to make any derivati[...]

FCC RF Radiation Exposure S t atement This equipment complies with FCC RF radiatio n exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter . “T o comply with FCC RF exposure compliance r equirements, this grant is applicable t[...]

Korea W arning S t atemen t s: 당해 무선설비는 운용중 전파혼신 가능성이 있음 . NCC Notice: 注意！ 依據 低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻 率、加大功率或變更原設計之特性或功[...]

This product can be used in the following countries: A T BG BY CA CZ DE DK EE ES FI FR GB GR HU IE IT L T L V MT NL NO PL PT RO RU SE SK TR UA[...]

TP-LINK TECHNOLOGIES CO., L TD TP-LINK TECHNOLOGIES CO., L TD. Building 24 (floors 1, 3, 4, 5), and 28 (floors 1-4) Central Science and T echnology Park, Shennan Rd, Nanshan, Shenzhen, China DECLARA TION OF CONFORMITY For the following equipment: Product Description: 150Mbp s Wireless N Nano Router Model No.: TL-WR702N T rademark: TP-LINK We declar[...]

- I - CONTENTS Package Co ntent s............................................................................................................... ................... 1 Chapter 1. Introduc tion ................................................................................................................... .... 2 1.1 Overview of the Ro uter .......[...]

- II - 4.6.2 Wireless Security ................................................................................................. 35 4.6.3 MAC Filt ering ....................................................................................................... 37 4.6.4 Wireless Advanced ..................................................................[...]

- III - 5.7.1 DHCP Se ttings..................................................................................................... 75 5.7.2 DHCP Clie nt s List ................................................................................................ 77 5.7.3 Address Reservation .................................................................[...]

- IV - 5.14.6 Reboot ............................................................................................................... 107 5.14.7 Password ........................................................................................................... 108 5.14.8 System Log ...................................................................[...]

- V - 7.6.1 Wireless Settings ............................................................................................... 131 7.6.2 Wireless Security ............................................................................................... 133 7.7 DHCP .......................................................................................[...]

- VI - 8.8.5 Reboot ............................................................................................................... 160 8.8.6 Password ........................................................................................................... 161 8.8.7 System Log ......................................................................[...]

TL-WR702N 150Mbps Wireless N Nano Router - 1 - Package Contents The following items should be found in your package: ¾ One TL-WR702N 150Mbps Wireless N Nano Router ¾ Quick Install ation Guide ¾ One Power Adapter ¾ One USB Cable ¾ One RJ-45 Ethernet Cable ¾ One Resource CD for TL-WR702N 150Mbps Wireless N Nano Router , including: • User Guid[...]

TL-WR702N 150Mbps Wireless N Nano Router - 2 - Chapter 1. Introduction 1.1 Overview of the Router Small enough to fit in the average pocket, the TL-WR702N 150Mbps Wireless N Nano Router is uniquely suited to provide robust wireless network i ng to travelers, students, or anyone else for work or play. TL-WR702N supports the newest 802.1 1n standards[...]

TL-WR702N 150Mbps Wireless N Nano Router - 3 - 1.2 Conventions The Router o r TL-WR 702N me ntione d in this guide s tand s for TL-WR702N 1 5 0 M b ps Wi re l es s N N ano Router without any explanation. Parameters provided in the pictures are just references for setting up the product, which may differ from the actual situ ation. Y ou can set the [...]

TL-WR702N 150Mbps Wireless N Nano Router - 4 - ¾ LAN/W AN: This LAN/W AN port works as LAN in AP/Repeater/ Bridge/Client mode and as W AN in Router mode. As LAN, it connects t he Router to the local PC; as W AN, it enables you connect the DSL/c able Modem, or Ethernet. ¾ Power: This port is used to connect the provided power adapter . ¾ Reset ?[...]

TL-WR702N 150Mbps Wireless N Nano Router - 5 - Chapter 2. Connecting the Router 2.1 System Requirement s ¾ Each PC in the LAN needs a working Ethernet Adapter ¾ TCP/IP protocol must be inst alled on each PC ¾ Web browser , such as Microsoft Internet Explorer 5.0 or later , Mozilla Firefox, Apple Safari ¾ If the device is configured to AP router[...]

TL-WR702N 150Mbps Wireless N Nano Router - 6 - 2.3.1 AP Mode As the supplement of wi red LAN, TL-WR702N enables the wir ed LAN to connect to the Internet wirelessly . The default mode of TL-WR702N is AP . Plug the pow er plug of TL-WR702N in electrical wall socket and connect the Ethernet cabl e correctly , you can surf the Internet by connecting y[...]

TL-WR702N 150Mbps Wireless N Nano Router - 7 - Figure 2-2 Hardware Installation of the TL-WR702N in Router Mode 1. Connect the W AN port of TL-WR702N to the LAN Port on the DSL/Cable Modem. 2. Connect the W AN port on the DSL/C able Modem to the wired Internet. 3. Plug the power plug of TL-WR7 02N in electrical wall socket. 4. Power on the DSL/Cabl[...]

TL-WR702N 150Mbps Wireless N Nano Router - 8 - ) Note: It is recommended that you connect a PC/notebook to the LAN port of the Router with an Ethernet cable, and then login the Router from the PC/notebook to se t the Router in AP Repeater mode. 2.3.4 Bridge Mode Similar to the Bridge mode, TL-WR702N in Brid ge mode is also used to extend the range [...]

TL-WR702N 150Mbps Wireless N Nano Router - 9 - Figure 2-5 Hardware Installation of the TL-WR702N in Client Mode 1. Connect the PC to the LAN/W AN port of TL-WR702N router with an Ethernet cable. 2. Plug the power plug of TL-WR7 02N in electrical wall socket. 3. Power on the PC(s). ) Note: TL-WR702N can be powered by external power ada pter or USB c[...]

TL-WR702N 150Mbps Wireless N Nano Router - 10 - Chapter 3. Quick Installation Guide This chapter will show you how to configure the basic functi ons of your TL-WR702N 150Mbps Wireless N Nano Router using Quick Setup Wi za rd within minutes. 3.1 TCP/IP Configuration The default IP address of the TL-WR702N 150Mbps Wireless N Nano Router is 192.168.0.[...]

TL-WR702N 150Mbps Wireless N Nano Router - 1 1 - Figure 3-2 Failure result of Ping command Please check the connection following these step s: 1. Is the connection bet ween your PC an d the Router correct? ) Note: The LED of LAN/W AN ports which you link to on the Router should be lit. 2. Is the TCP/IP configur ation for your PC correct? ) Note: If[...]

TL-WR702N 150Mbps Wireless N Nano Router - 12 - Figure 3-3 Login Windows ) Note: If the above screen does not pop-up, it means that your W eb-b rowser has been set to a proxy . Go to T ools menu>Internet Options>Connections>LAN Settings, in the scr een that appears, cancel the Using Proxy checkbox, and click OK to finish it. 2. After a su [...]

TL-WR702N 150Mbps Wireless N Nano Router - 13 - Figure 3-5 Quick Setup - W orking Mode ) Note: The Router supports five worki ng modes for multi-user to acce ss the Internet: AP, Router, Repeater, Bridge and Client. In AP mode, TL-WR 702N enables the wired LAN to connect to the Internet wirelessly. In Router mode, it can a ccess the Internet via DS[...]

TL-WR702N 150Mbps Wireless N Nano Router - 14 - Figure 3-6 Quick Setup - Wireless AP ¾ Wireless Radio - Enable or disable the wireless radi o choosing from the pull-down list. ¾ SSID - Enter a string of up to 32 characters. The same name of SSID (Service Set Identification) must be assigned to all wire less devices in your network. The default SS[...]

TL-WR702N 150Mbps Wireless N Nano Router - 15 - • 11bg mixed - Select if you are using both 802.11b and 802.11g wireless clients. • 11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless clients. Select the desired wireless mode. When 802. 11g mode is selected, only 802.11g wireless stations can connect to the R outer. Wh[...]

TL-WR702N 150Mbps Wireless N Nano Router - 16 - Figure 3-8 Quick Setup – Finish 3.2.2 Router Mode When you choose Router on Working Mode p age in Figure 3-5 , take the following steps: 1. Click Next in Figure 3-5 , and you will see the followi ng scree n. The wireless settings on Router mode are the same as that on AP mode. Figure 3-9 Quick Setup[...]

TL-WR702N 150Mbps Wireless N Nano Router - 17 - Figure 3-10 Quick Set up - WAN Connection Type The Router supports three popular ways PPPoE , Dynamic IP and Static IP to connect to the Internet. T o make sure the connection type your IS P provides, please refer to the ISP . Make sure the cable is securely plugged in to the W AN port before detectio[...]

TL-WR702N 150Mbps Wireless N Nano Router - 18 - Figure 3-12 Quick Setup – MAC Clone ¾ St atic IP - This type of connection uses a permanent, fixed (static) IP address that your ISP assigned. In this type, you should fill in the IP addr ess, Subnet Mask, De fault Gateway , and DNS IP address manually , which are specified by your ISP . Then click[...]

TL-WR702N 150Mbps Wireless N Nano Router - 19 - 3.2.3 Repeater Mode When you choose Repeater Mode on Working Mode page in Figure 3-5 , take the following steps: 1. Click Next , and then Wireless Repeater page will appear as shown in Figure 3-15. Figure 3-15 Quick Setup - Wireless Repeater ¾ SSID - The SSID of AP that you want to access. ¾ MAC of [...]

TL-WR702N 150Mbps Wireless N Nano Router - 20 - Click Survey button on the Wireless page as sh own in Figure 3-15, and then AP List page will appear as shown in Figure 3-16. Find the SSID of the Access Point you wan t to acce ss, and click Connect in the corresponding row . For example, the th ird item is selected. The target network’ s SSID will[...]

TL-WR702N 150Mbps Wireless N Nano Router - 21 - Figure 3-17 Quick Setup - Finish 3.2.4 Bridge Mode When you choose Bridge on Working Mode p age in Figure 3-5 , take the following steps: 1. Click Next , and then Wireless Repeater page will appear as shown in Figure 3-18. Figure 3-18 Quick Setup - Wireless Bridge ¾ SSID - Enter a string of up to 32 [...]

TL-WR702N 150Mbps Wireless N Nano Router - 22 - ¾ Region - Select your region from the pull-down lis t. This field specifies the region w here the wireless function of the Router can be used. It may be illegal to use the wireless function of the Router in a region other than one of those specified in this field. If your country or region is not li[...]

TL-WR702N 150Mbps Wireless N Nano Router - 23 - ¾ PassWord - If the AP your Router is going to co nnect needs password, you need to fill the password in this blank. Click Survey button on the Wireless page as sh own in Figure 3-18, and then AP List page will appear as shown in Figure 3-19. Find the SSID of the Access Point you wan t to acce ss, an[...]

TL-WR702N 150Mbps Wireless N Nano Router - 24 - Figure 3-20 Quick Setup - Wireless Security Settings This page is for setting wireless security of y our ow n AP . When computers and mobile phones are connected to the AP , they s hould input the same password. ¾ Disable Security - The wireless security function can be enabled or disabled. If disabl[...]

TL-WR702N 150Mbps Wireless N Nano Router - 25 - Figure 3-22 Quick Setup - Wireless Client ¾ SSID - Enter the SSID that you want to access. ¾ MAC of AP - Enter the MAC address of AP that you want to access. ¾ Region - Select your region from the pull-down list. This field specifies the region where the wireless function of the Router can be used.[...]

TL-WR702N 150Mbps Wireless N Nano Router - 26 - Figure 3-23 AP List 3. Click the Next button in Figure 3-24. Y ou will then see the Fin ish page. Click the Reboot button to make your wireless configurati on take ef fect and finish the Quick Setup. Figure 3-24 Quick Setup - Finish[...]

TL-WR702N 150Mbps Wireless N Nano Router - 27 - ) Note: 1. The operating distance or range of your wire less connection varies si gnificantly based on the physical placement of the Router . Fo r best results, place your Router . z Near the center of the area in which your wireless stations will operate. z In an elevated location such as a high shel[...]

TL-WR702N 150Mbps Wireless N Nano Router - 28 - Chapter 4. Configuration for AP Mode This chapter will show each Web p age's key f unctions and the configurat ion way for AP Mode of TL-WR702N. 4.1 Login After your successful login, you can configur e and manage the device. T here are main menus on the left of the web-based utility . Submenus w[...]

TL-WR702N 150Mbps Wireless N Nano Router - 29 - Figure 4-2 S tatus ¾ Firmware V ersion - The version information of the Router ’s firmware. ¾ Hardware V ersion - The version information of the Router ’s hardware. ¾ LAN - This field displays the current settings or information for the LA N, you can configure them in the Network > LAN page.[...]

TL-WR702N 150Mbps Wireless N Nano Router - 30 - • Channel Wid th - The current wireless channel width in use. • MAC address - The physical address of the Router , as seen from the WLAN. • WDS St atus - The status of WDS connection. ¾ Syst em Up Time - The length of the time since the Router was last power ed on or reset. Click the Refresh bu[...]

TL-WR702N 150Mbps Wireless N Nano Router - 31 - 4.5 Network Figure 4-5 the Network menu There is only one submenu under the Network menu (shown in Figure 4-5): LAN . 4.5.1 LAN Choose menu “ Network → LAN ”, and then you can conf igure the IP parameters of th e LAN on the screen as below . Figure 4-6 LAN ¾ Address T ype - Choosing Smart IP(DH[...]

TL-WR702N 150Mbps Wireless N Nano Router - 32 - 4.6 Wireless Figure 4-7 Wireless menu There are five submenus under the Wireless menu (shown in Figure 4-7): Wireless Settings , Wireless Security , MAC Filtering, Wireless Advanced and Wireless S tatistics. Click any of them, and you will be able to confi gure the corresponding function. 4.6.1 Wirele[...]

TL-WR702N 150Mbps Wireless N Nano Router - 33 - name (SSID) to a different value. This value is case-sensitive. For example, TEST is NOT the same as test . ¾ Region - Select your region from the pull-down lis t. This field specifies the region w here the wireless function of the Router can be used. It may be illegal to use the wireless function of[...]

TL-WR702N 150Mbps Wireless N Nano Router - 34 - ¾ SSID (to be bridged) - The SSID of the AP your Router is going to connect to as a client. You can also use the search func tion to select the SSID to join. ¾ BSSID (to be bridged) - The BSSID of the AP your Router is going to connect to as a client. You can also use the search func tion to select [...]

TL-WR702N 150Mbps Wireless N Nano Router - 35 - z Away from large metal surfaces. 2. Failure to follow these gui delines can result in significant performance degradation or inabi lity to wirelessly connect to the Router . 4.6.2 Wireless Security Choose menu “ Wi rel es s → W ireless Securit y ”, and then you can configure the security settin[...]

TL-WR702N 150Mbps Wireless N Nano Router - 36 - ¾ WEP - It is based on t he IEEE 802.11 standard. • Typ e - you can choose the type for the WEP se curity on the pull-down list. The default setting is Automatic , which can select Shared Key or Open System authentication type automatically based on the wirele ss station's capability and reque[...]

TL-WR702N 150Mbps Wireless N Nano Router - 37 - • Ve r s i o n - you can choose the version of the WPA- PSK security on the drop-down list . The default setting is Automatic (Recommended) , which can select WP A-PSK (Pre-shared key of WPA) or WP A2-PSK (Pre-shared key of WPA) autom atically based on the wirele ss station's capability and req[...]

TL-WR702N 150Mbps Wireless N Nano Router - 38 - ¾ MAC Address - The wireless st ation's MAC address that you want to access. ¾ Statu s - The status of this entry , either Enabled or Disabled . ¾ Description - A simple description of the wireless station. To Add a Wireless MAC Addre ss filtering entry, click the Add N ew … button. The &quo[...]

TL-WR702N 150Mbps Wireless N Nano Router - 39 - For example: If you desire that the wireless statio n A with MAC address 00-0A- EB-B0-00-0B and the wireless station B with MAC address 00-0A-EB -00-07-5F are able to access the Router, but all the other wi reless stations cannot access the Rout er, you can co nfigure the Wir eless MAC Address Filteri[...]

TL-WR702N 150Mbps Wireless N Nano Router - 40 - Figure 4-12 Wireless Advanced ¾ Transmit Power - Here you can specify the transmit power of Router. You can select High, Middle or Low which you would like. High is the default setting and is recommended. ¾ Beacon Interval - Enter a value between 20-1000 millise conds for Beacon Interval here. The b[...]

TL-WR702N 150Mbps Wireless N Nano Router - 41 - ¾ Enabled AP Isolation - This function isolate a ll connected wireless stati ons so that wireless stations cannot access each other throug h WLAN. This function will be disabled if WDS/Bridge is enabled. ) Note: If you are not familiar with the setting items in this page, it's strongly recommend[...]

TL-WR702N 150Mbps Wireless N Nano Router - 42 - 4.7 DHCP Figure 4-14 The DHCP menu There are three submenus unde r the DH CP menu (shown in Figure 4-14), DH CP Settings , DHCP Client s List and Address Reserv ation. Click any of them, and you will be able to configure the corre sponding function. 4.7.1 DHCP Settings Choose menu “ DHCP → DHCP Se[...]

TL-WR702N 150Mbps Wireless N Nano Router - 43 - Figure 4-16 DHCP Setting s ¾ DHCP Server - Enable or Disable the DHCP server . If you disable the Server , you must have another DHCP server within your network o r else you must configure the computer manually . ¾ St art IP Address - S pecify an IP address for the DHCP Server to start with when ass[...]

TL-WR702N 150Mbps Wireless N Nano Router - 44 - 4.7.2 DHCP Clients List Choose menu “ DHCP → DHCP Client s List ”, and then you can view the information about the clients attach ed to the Router in the screen as shown in Figure 4-17. Figure 4-17 DHCP Clie nts List ¾ Client Name - The name of the DHCP client ¾ MAC Address - The MAC address o[...]

TL-WR702N 150Mbps Wireless N Nano Router - 45 - ¾ Reserved IP Address - The IP address reserved for the PC by the Router. ¾ Status - The status of this entry either Enabled or Disabled . To Reserve an IP address: 1. Click the Add New… button. Then Figure 4-19 will pop-up. 2. Enter the MAC address (in XX-XX-XX-XX-XX-XX format.) and IP address (i[...]

TL-WR702N 150Mbps Wireless N Nano Router - 46 - Choose menu “ System T ools ”, and then you can see the submenus under the ma in menu: Diagnostic , Firmware , Factory Defaults, Backup & Restore, Reboot, Pass w ord, and Syste m Log. Click any of them, and you will be able to c onfigure the corresponding function. The detailed explanations fo[...]

TL-WR702N 150Mbps Wireless N Nano Router - 47 - ¾ IP Address/Domain Name - T ype the destination IP address (e.g. 202.108.22.5) or Domain name (e.g. http://www .tp-link.com). ¾ Pings Coun t - The number of Ping packe ts for a Ping connection. The default is 4. ¾ Ping Packet Size - The size of Ping packet. The default is 64. ¾ Ping Ti meout - Se[...]

TL-WR702N 150Mbps Wireless N Nano Router - 48 - ¾ Hardware Version - This displays the current hardware version. The hardware version of the upgrade file must accord with the R outer’s current hardware version. T o upgrade the Router's firmware, follow these instructions below: 1. Download a more recent firmware upgrade file from the TP-LIN[...]

TL-WR702N 150Mbps Wireless N Nano Router - 49 - ) Note: All changed settings will be lost when defaults are restored. 4.8.4 Backup & Restore Choose menu “ System T ools → Backup & Restore ”, and then you can save the curren t configuration of the Rout er as a backup file and restore the configuration via a backup file as shown in Figu[...]

TL-WR702N 150Mbps Wireless N Nano Router - 50 - • Change the LAN IP Address (syst em will reboot automatically). • Change the DHCP Settings. • Change the Wireless configurations. • Change the Web Management Port. • Upgrade the firmware of the Router (system will reboot automatically). • Restore the Router's settings to factory defa[...]

TL-WR702N 150Mbps Wireless N Nano Router - 51 - 4.8.7 System Log Choose menu “ System T ools → System Log ”, and then you can view the logs of the Router. Figure 4-28 System Log ¾ Refresh - Refresh the page to show the latest log list. ¾ Clear All - All the logs will be deleted from the Rout er permanently, not just from the page.[...]

TL-WR702N 150Mbps Wireless N Nano Router - 52 - Chapter 5. Configuration for Router Mode This chapter will show each W eb page's key functions and the confi guration way for Router Mode of TL-WR702N. 5.1 Login After your successful login, you can configur e and manage the device. T here are main menus on the left of the web-based utility . Sub[...]

TL-WR702N 150Mbps Wireless N Nano Router - 53 - Figure 5-2 ¾ Firmware V ersion - The version information of the Router ’s firmware. ¾ Hardware V ersion - The version information of the Router ’s hardware.[...]

TL-WR702N 150Mbps Wireless N Nano Router - 54 - ¾ LAN - This field displays the current settings or information for the LA N, you can configure them in the Network > LAN page. • MAC Address - The physical address of the Rout er , as seen from the LAN. • IP Address - The LAN IP address of the Router . • Subnet Mask - The subnet mask associ[...]

TL-WR702N 150Mbps Wireless N Nano Router - 55 - • Received (Packets) - T raffic that counted in pa ckets has been received out from the W AN port. ¾ Syst em Up Time - The length of the time since the Router was last power ed on or reset. Click the Refresh button to get the latest stat us and settings of the Router . 5.3 Quick Setup Please refer [...]

TL-WR702N 150Mbps Wireless N Nano Router - 56 - 5.5 Network Figure 5-5 the Network menu There are three submenus under the Network menu (shown in Figure 5-5): WA N , LAN and MAC Clone. Click any of them, and you will be able to configure the corresp onding function. 5.5.1 WAN Choose menu “ Network → WA N ”, an d then you can configure t he IP[...]

TL-WR702N 150Mbps Wireless N Nano Router - 57 - This page displays the WAN IP parameters as signed dynamically by your ISP , including IP address, Subnet Mask, Default Gateway , etc. Click the Renew button to renew the IP p arameters from your ISP . Click the Release button to release the IP p arameters. ¾ MTU Size - The normal MTU (Maximum T rans[...]

TL-WR702N 150Mbps Wireless N Nano Router - 58 - ¾ IP Address - Enter the IP address in dotted-decimal not ation provided by yo ur ISP . ¾ Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP , usually is 255.255.255.0. ¾ Default Gateway - (Optional) Enter the gateway IP address in dotted-decimal not ation provided [...]

TL-WR702N 150Mbps Wireless N Nano Router - 59 - ¾ Secondary Connection - It’ s available only for PPPoE Connec tion. If your ISP provides an extra Connection type such as Dynamic/St at ic IP to connect to a local area network, then you can check the radio button of Dynamic/S tatic IP to activate this secondary connection. • Disabled - The Seco[...]

TL-WR702N 150Mbps Wireless N Nano Router - 60 - Figure 5-9 PPPoE Advanced Settings ¾ MTU Size - The default MTU size is “1480” bytes, which is usually fine. It is not recommended that you change the default MTU Size unless required by your ISP . ¾ Service Name/AC Name - The ser vice name and AC (Access Concentrator) name should not be configu[...]

TL-WR702N 150Mbps Wireless N Nano Router - 61 - Figure 5-10 W AN – L2TP/Russia L2TP ¾ User Name/Password - Enter the User Name and Password provided by your ISP . These fields are case-sensitive. ¾ Dynamic IP/ St atic IP - Choose either as you are gi ven by your ISP . Click the Connect button to connect immediately . Click the Disconnect button[...]

TL-WR702N 150Mbps Wireless N Nano Router - 62 - ¾ Connect Manually - Y ou can configure the Route r to make it connect or disconnect manually . After a specified period of inactivity ( Max Idle T ime ), the Router will disconnect from your Internet connection, and you will not be able to re-establish your connection automatically as soon as you at[...]

TL-WR702N 150Mbps Wireless N Nano Router - 63 - ¾ User Name/Password - Enter the User Name and Password provided by your ISP . These fields are case-sensitive. ¾ Dynamic IP/ S tatic IP - Choose either as you are gi ven by your ISP and enter the ISP’s IP address or the domain name. If you choose static IP and enter the domai n name, you should a[...]

TL-WR702N 150Mbps Wireless N Nano Router - 64 - 5.5.2 LAN Choose menu “ Network → LAN ”, and then you can conf igure the IP parameters of th e LAN on the screen as below . Figure 5-12 LAN ¾ MAC Address - The physical address of the LAN ports , as seen from the LAN. The value can't be changed. ¾ IP Address - Enter the IP address of your[...]

TL-WR702N 150Mbps Wireless N Nano Router - 65 - Some ISPs require that you re gister the MAC Address of your adapter . Changes are rarely needed here. ¾ WAN MAC Address - This field displays the current MAC address of the WAN port. If your ISP requires you to register the MAC address, please enter the correct MAC address into this field in XX-XX-X[...]

TL-WR702N 150Mbps Wireless N Nano Router - 66 - Figure 5-15 Wireless Settings - Router ¾ SSID - Enter a string of up to 32 characters. The same name of SSID (Service Set Identification) must be assigned to all wireless devices in your network. The default SSID is set to be TP-LINK_XXXXXX (XXXX XX indicates the last unique six numbers of each Route[...]

TL-WR702N 150Mbps Wireless N Nano Router - 67 - Select the desired wireless mode. When 802. 11g mode is selected, only 802.11g wireless stations can connect to the R outer. When 802.11n mode is se lected, only 802.11n wireless stations can connect to the AP. It is st rongly recommended that you set the Mode to 802.11b/g/n , and all of 802.11b, 802.[...]

TL-WR702N 150Mbps Wireless N Nano Router - 68 - ¾ WEP Index - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX). It indicates the index of the WEP key. ¾ Authentication Type - This option should be c hosen if the key type is WEP (ASCII) or WEP (HEX). It indicates the authoriz ation type of the Root AP. ¾ Password - If the [...]

TL-WR702N 150Mbps Wireless N Nano Router - 69 - Figure 5-16 Wireless Security ¾ Disable Security - The wireless security function can be enabled or disabled . If disabled, the wireless stations will be able to con nect the Ro uter without encryption. But it’s strongl y recommended to choose one of the following modes to enable security. ¾ WEP -[...]

TL-WR702N 150Mbps Wireless N Nano Router - 70 - • WEP Key (Password) - Select which of the four keys will be used and enter the matching WEP key that you create. Make sure these val ues are identical on all wireless stations in your network. • Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for encryption. "D[...]

TL-WR702N 150Mbps Wireless N Nano Router - 71 - For ASCII , the key can be made up of any numbe rs 0 to 9 and any letters A to Z, the length should be between 8 and 63 characters. For Hexadecimal , the key can be made up of any numbers 0 to 9 and letters A to F, the length should be between 8 and 64 characters. Please also note the key is case sens[...]

TL-WR702N 150Mbps Wireless N Nano Router - 72 - Figure 5-18 Add or Modify Wirele ss MA C Address Filtering entry To add or modify a MAC Address Filtering entry, follo w these instructions: 1. Enter the approp riate MAC Address into the MAC Address field. The format of the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit) . For example: [...]

TL-WR702N 150Mbps Wireless N Nano Router - 73 - 3. Delete all or disable all entries if there are any entries already. 4. Click the Add New... button. 1) Enter the MAC addr ess 00-0A-EB-B 0-00-0B/00-0 A-EB-00-07-5 F in the MAC Address field. 2) Enter wireless station A/B in the Descr iption field. 3) Select Enabled in the Status pull-down list. 4) [...]

TL-WR702N 150Mbps Wireless N Nano Router - 74 - ¾ Beacon Interval - Enter a value between 20-1000 millise conds for Beacon Interval here. The beacons are the packets sent by the Router to synchr onize a wireless network. Beaco n Interval value determines the time interval of the beacons. The default value is 100. ¾ RTS Threshold - Here you can sp[...]

TL-WR702N 150Mbps Wireless N Nano Router - 75 - Figure 5-20 Wireless S t atistics ¾ MAC Address - The connected wireless station's MAC address ¾ Current Status - The connected wireless stat ion's running status, one of STA-AUTH / STA-ASSOC / STA-JOINED / WPA / WP A-PSK / WPA 2 / WPA2-PSK / AP-UP / AP -DOWN / Disconnected ¾ Received Pac[...]

TL-WR702N 150Mbps Wireless N Nano Router - 76 - Configuration Protocol) server , wh ich provides the TCP/IP configur ation for all the PC(s) that are connected to the Rout er on the LAN. Figure 5-22 DHCP Setting s ¾ DHCP Server - Enable or Disable the DHCP server . If you disable the Server , you must have another DHCP server within your network o[...]

TL-WR702N 150Mbps Wireless N Nano Router - 77 - ) Note: To use the DHCP server function of the Router, you must configure all computers on the LAN as "Obtain an IP Address automatically". 5.7.2 DHCP Clients List Choose menu “ DHCP → DHCP Client s List ”, and then you can view the information about the clients attach ed to the Router[...]

TL-WR702N 150Mbps Wireless N Nano Router - 78 - Figure 5-24 Address Re servation ¾ MAC Address - The MAC address of the PC for which you want to reserve an IP address. ¾ Reserved IP Address - The IP address reserved for the PC by the Router. ¾ Status - The status of this entry, either Enabled or Disabled . To Reserve an IP address: 1. Click the [...]

TL-WR702N 150Mbps Wireless N Nano Router - 79 - 5.8 Forwarding Figure 5-26 The Forwarding menu There are four submenus under the Forwar ding menu (shown in Figure 5-26): V irtual Servers , Port T riggering , DMZ and UPnP . Click any of them, and you will be able to configure the corresponding function. 5.8.1 Virtual Servers Choose menu “ Forwardi[...]

TL-WR702N 150Mbps Wireless N Nano Router - 80 - To setup a virtual server entry: 1. Click the Add New… button, the next screen will pop-up as shown in Figure 5-28. 2. Select the service port you want to use from the Common Service Port list. If the Common Service Port list does not have the service that you want to use, type the service port numb[...]

TL-WR702N 150Mbps Wireless N Nano Router - 81 - ) Note: If you set the service port of the virtual server as 80, you must set the Web management port on “ Security → Remote Management ” page to be any other value except 80 such as 8080. Otherwise there will be a conflict to disable the virtual server. 5.8.2 Port Triggering Choose menu “ For[...]

TL-WR702N 150Mbps Wireless N Nano Router - 82 - To add a new rule, follow the steps below: 1. Click the Add New… button, the next screen will pop-up as shown in Figure 5-30. 2. Select a common application from the Common Applications drop-down list, then the T rigger Port field and the Incoming Port s field will be automatic ally filled. If the C[...]

TL-WR702N 150Mbps Wireless N Nano Router - 83 - ) Note: 1. When the trigger connecti on is released, the correspondi ng opening ports will be closed. 2. Each rule is allowed to be used only by one host on LAN synchron ously . The trigger connection of other hosts on LAN will be refused. 3. Incoming Port Range cannot overlap e ach other. 5.8.3 DMZ C[...]

TL-WR702N 150Mbps Wireless N Nano Router - 84 - Figure 5-32 UPnP ¾ Current UPnP Status - UPnP can be enabled or disabled by clicking the Enable or Dis able button. ¾ Current UPnP Settings List - This table displays the current UPnP information. • App Description - The description provided by the application in the UPnP request. • External Por[...]

TL-WR702N 150Mbps Wireless N Nano Router - 85 - 5.9.1 Firewall Using the Firewall page, you can turn the general firewall switch on or off. The default setting for the switch is off. If the general firewall switch is of f, even if IP Address Filtering, DNS Filtering and MAC Filtering are enabled, their settings are ineffective. Figure 5-34 Firewall[...]

TL-WR702N 150Mbps Wireless N Nano Router - 86 - Figure 5-35 IP address Filtering T o disable the IP Address Filteri ng feature, keep t he default setting, Disabled . T o set up an IP Address Filtering entry , click Enable Firewall and Enable IP Address Filtering on the Firewall page, and click the Add Ne w … button. The page " Add or Modify [...]

TL-WR702N 150Mbps Wireless N Nano Router - 87 - 6. Protocol - Select which protocol is to be used, either TCP , UDP , or All (all protocols supported by the router). 7. Action - Select either Allow or Deny through the router . 8. Stat us - Select Enabled or Disabled for this entry on the Stat us pull-down list. 9. Click the Save button to save this[...]

TL-WR702N 150Mbps Wireless N Nano Router - 88 - Figure 5-37 Domain Filtering Before adding a Domain Filtering entry , you must ensure that Enable Firewall and Enable Domain Filtering have been selected on the Firewall page. T o Add a Domain filtering entry , click the Add New … button. The p age " Add or Modify a Domain Filtering entry "[...]

TL-WR702N 150Mbps Wireless N Nano Router - 89 - Click the Next button to go to the next page and the Previous button to return to the previ ous page. For example : if you want to block the PC(s) on your LAN to access websites www .xxyy .com.cn, www .aabbcc.com and websites with .net in the end on the Internet while no limit for other websites, you [...]

TL-WR702N 150Mbps Wireless N Nano Router - 90 - T o add or modify a MAC Address Filter ing entry , follow these instructions: 1. Enter the approp riate MAC Address into the MAC Address field. The format of the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit) . For example: 00-0E-AE-B0-00-0B. 2. T ype the description of the PC in the De[...]

TL-WR702N 150Mbps Wireless N Nano Router - 91 - Figure 5-41 Remote Management ¾ Web Management Port - W eb browser access normally uses the standard HTTP service port 80. This router ’s default re mote management W eb port number is 80 . For greater security , you can change the remote management Web interface to a custom port by entering that n[...]

TL-WR702N 150Mbps Wireless N Nano Router - 92 - Figure 5-42 Advanced Security settings ¾ Packet s St a tistic interval (5 ~ 60) - The default value is 10. Se lect a value between 5 and 60 seconds in the pull-down list. The Packet s St atistic interval value indicates the time section of the packet s statistic. The resu lt of the statistic used for[...]

TL-WR702N 150Mbps Wireless N Nano Router - 93 - ¾ Ignore Ping Packet from W AN Port - Enable or Disable ignore ping packet from WAN po rt. The default is disabled. If enabl ed, the ping packet from the Internet cannot access the router . ¾ Forbid Ping Packet from LAN Port - Enable or Disable forbidding Ping Packet to access the router from the LA[...]

TL-WR702N 150Mbps Wireless N Nano Router - 94 - T o add static routing entries: 1. Click the Add New button. 2. Enter the following data: ¾ Destination IP Address - The Destination IP Address is the address of the network or host that you want to assign to a static route. ¾ Subnet Mask - The Subnet Mask determines which portion of an IP Address i[...]

TL-WR702N 150Mbps Wireless N Nano Router - 95 - Figure 5-46 IP QoS ¾ Enable IP Q oS - Enable or disable the function of IP QoS. ¾ Choose BandWid th T ype - Select the network connection ty pe from the drop-down list. ¾ Bandwidth Apply - The bandwidth you get. If you are not clear about that, please contact with your ISP for help. ¾ IP Range - I[...]

TL-WR702N 150Mbps Wireless N Nano Router - 96 - 4. IP address range for dif ferent entries coul d not have intersection with each other . 5. After the confi gurations, click the Save button for the change to take ef fect. 5.12 IP & MAC Binding Setting Figure 5-47 the IP & MAC Binding menu There are two submenus under the IP & MAC Bindin[...]

TL-WR702N 150Mbps Wireless N Nano Router - 97 - Figure 5-49 IP & MAC Bin ding Setting (Add & Modify) T o add IP & MAC Binding entries: 1. Click the Add New… button. 2. Enter the MAC Address and IP Address. 3. Select the Bind checkbox. 4. Click the Save button to save it. T o modify or delete an existing entry : 1. Find the desired ent[...]

TL-WR702N 150Mbps Wireless N Nano Router - 98 - 5.12.2 ARP List T o manage the computer , you could observe the computers in the LAN by checking the relationship of MAC address and IP address on the ARP list, a nd you could configure the items on the ARP list also. This p age displays the ARP Li st; it shows all the existing IP & MAC Binding en[...]

TL-WR702N 150Mbps Wireless N Nano Router - 99 - service providers such as www .o ray .net , www.co mexe.cn , www .dyndns.org , or www.no-ip.com . The Dynamic DNS client service provi der will give you a password or key. 5.13.1 No-IP DDNS If the dynamic DNS Service Provider you select is www.no-ip.com , the page will appear as shown in Figure 5-52. [...]

TL-WR702N 150Mbps Wireless N Nano Router - 100 - Figure 5-53 PeanutHull DDNS Settings To set up for DDNS, follow these instructions: 1. Enter the User Name for your DDNS account. 2. Enter the Passwo rd for your DDNS account. 3. Click the Login button to login to the DDNS service. Connection Status - The status of the DDNS serv ice connection is dis[...]

TL-WR702N 150Mbps Wireless N Nano Router - 101 - Figure 5-54 Comexe.cn DDNS Settings To set up for DDNS, follow these instructions: 1. T ype the Domain Name received from your dynamic DNS service provider . 2. T ype the User Name for your DDNS account. 3. T ype the Password for your DDNS account. 4. Click the Login button to log in to the DDNS serv[...]

TL-WR702N 150Mbps Wireless N Nano Router - 102 - Figure 5-55 Dyndns.org DDNS Settings To set up for DDNS, follow these instructions: 1. T ype the User Name for your DDNS account. 2. T ype the Password for your DDNS account. 3. T ype the Domain Name you received from dynamic DNS service provider here. 4. Click the Login button to log in to the DDNS [...]

TL-WR702N 150Mbps Wireless N Nano Router - 103 - There are nine submenus under the System T ools menu: Tim e , Diagnostic , Firmw are , Factor y Default s, Backup and Restore, Reb oot, Password, System Log and S tatistics. Click any of them, and you will be able to conf igure the corresponding function. The detailed explanations for each submenu ar[...]

TL-WR702N 150Mbps Wireless N Nano Router - 104 - ¾ The time will be lost if the router is turned of f. ¾ The router will obtain GMT automatically from Internet if it has already connected to Internet. 5.14.2 Diagnostic Choose menu “ System T ools → Diagnostic ”, you can transact Ping or T raceroute function to check connectivity of your net[...]

TL-WR702N 150Mbps Wireless N Nano Router - 105 - ¾ IP Address/Domain Name - T ype the destination IP address (such as 202.108.22.5) or Domain name (such as www . baidu.com). ¾ Pings Count - The number of Ping packe ts for a Ping connection. ¾ Ping Packet Size - The size of Ping packet. ¾ Ping Ti meout - Set the waiting time for the reply of eac[...]

TL-WR702N 150Mbps Wireless N Nano Router - 106 - New firmware is posted at www .tp-link.com and can be downloaded for free. If the router is not experiencing difficulties, there is no need to upgr ade firmware, unless the new firmware supports a new feature you need. ) Note: 1. When you upgrade the router 's firmware, you will lose current con[...]

TL-WR702N 150Mbps Wireless N Nano Router - 107 - 5.14.5 Backup & Restore This page allows you to save curr ent configuration of router as backup or rest ore the configuration file you saved before. Figure 5-62 Backup & Restore Configuration ¾ Click the Backup button to save all configuration setti ngs as a backup file in your local compute[...]

TL-WR702N 150Mbps Wireless N Nano Router - 108 - ¾ Web Service Port of the router ¾ Upgrade the firmware of the router (system will reboot automatically). ¾ Restore the router's settings to factory default (system will rebo ot automatically .) 5.14.7 Passw ord This page allows you to change the factory default user name and password of the [...]

TL-WR702N 150Mbps Wireless N Nano Router - 109 - The router can keep logs of all traffic. Y ou can query the logs to find what happened to the router . Click the Refresh button to refresh the logs. Click the Clear All button to clear all the logs. 5.14.9 Statistics The S tatistics page displays the net work traf fic of each PC in LAN, including tot[...]

TL-WR702N 150Mbps Wireless N Nano Router - 1 10 - St atistics T able: IP Address The IP Address displayed with statistics Packets The total amount of p ackets received and transmitted by the router . To t a l Byt es The total amount of bytes received and transmitted by the router . Packets The total amount of p ackets received and transmitted in th[...]

TL-WR702N 150Mbps Wireless N Nano Router - 1 1 1 - Chapter 6. Configuration for Repeater Mode This chapter will show each W eb page's key functions and the c onfiguration way for Repeater Mode of TL-WR702N. 6.1 Login After your successful login, you can configur e and manage the device. T here are main menus on the left of the web-based utilit[...]

TL-WR702N 150Mbps Wireless N Nano Router - 1 12 - Figure 6-2 S tatus ¾ Firmware V ersion - The version information of the Router ’s firmware. ¾ Hardware V ersion - The version information of the Router ’s hardware. ¾ LAN - This field displays the current settings or information for the LA N, you can configure them in the Network > LAN pag[...]

TL-WR702N 150Mbps Wireless N Nano Router - 1 13 - 6.4 Wo rking Mode The Router supports fi ve operation mode types: AP, Router , Repeater , Bridge and Client . Please select one your want. Click Save to save your choice, which is shown as Figure 4-3. Figure 6-3 W orking Mode ¾ AP - The wireless access point mode. ¾ Router - The wireless Router Mo[...]

TL-WR702N 150Mbps Wireless N Nano Router - 1 14 - 6.5.1 LAN Choose menu “ Network → LAN ”, and then you can conf igure the IP parameters of th e LAN on the screen as below . Figure 6-6 LAN ¾ Address T ype - Choosing Smart IP(DHCP) to get IP address from DHCP server , or choosing St atic IP to configure IP address manually . ¾ MAC Address - [...]

TL-WR702N 150Mbps Wireless N Nano Router - 1 15 - 6.6.1 Wireless Settings Choose menu “ Wir el es s → Wireless Settings ”, and then you can confi gure the basic settings for the wireless network on this page. Figure 6-8 Wireless Setting s - Repeater ¾ SSID - The SSID of AP that you want to access. ¾ MAC of AP - The MAC address of AP that yo[...]

TL-WR702N 150Mbps Wireless N Nano Router - 1 16 - ¾ Authentication T y pe - This option should be chosen if t he key type is WEP (ASCII) or WEP (HEX). It indicates the authentic ation type of the Root AP . ¾ Password - If the AP your router is going to co nnect need password, you need to fill the password in this blank. Be sure to click the Save [...]

TL-WR702N 150Mbps Wireless N Nano Router - 1 17 - Figure 6-10 DHCP Settings Figure 6-1 1 DHCP Settings ¾ DHCP Server - Enable or Disable the DHCP server . If you disable the Server , you must have another DHCP server within your network o r else you must configure the computer manually . ¾ St art IP Address - S pecify an IP address for the DHCP S[...]

TL-WR702N 150Mbps Wireless N Nano Router - 1 18 - time is up, the user will be automatically assigned a new dynam ic IP address. The range of the time is 1 ~ 2880 minutes. The default value is 120 minutes. ¾ Default Gateway (Optional) - It is suggested to input the IP address of the LAN port of the Router. The default va lue is 192.168.0.254. ¾ D[...]

TL-WR702N 150Mbps Wireless N Nano Router - 1 19 - address for a PC on the LAN, that PC will always receive the same IP address each time when it accesses the DHCP server . Reserved IP addre sses should be assigned to the servers that require permanent IP settings. Figure 6-13 Address Reservation ¾ MAC Address - The MAC address of the PC for which [...]

TL-WR702N 150Mbps Wireless N Nano Router - 120 - Click the Enable/Disabled All button to make all entries enabled/disabled. Click the Delete All button to delete all entries. Click the Next button to go to the next page and Click the Previous button to return the previous page. 6.8 System T ools Figure 6-15 T he System T ools menu Choose menu “ S[...]

TL-WR702N 150Mbps Wireless N Nano Router - 121 - Figure 6-16 Diagnostic T ools ¾ Diagnostic T ool - Check the radio button to select one diagnostic tool. • Ping - This diagnostic tool troubleshoots connectivity , reachabilit y , and name resolution to a given host or gateway . • T raceroute - This diagnostic tool tests the performance of a con[...]

TL-WR702N 150Mbps Wireless N Nano Router - 122 - ¾ T raceroute Max TTL - The max num ber of hops for a T r aceroute connection. The default is 20. Click St a rt to check the connectivity of the Internet. The Diagnostic Result s page displays the result of diagnosis. If the result is similar to the following screen, the connectivity of t he Interne[...]

TL-WR702N 150Mbps Wireless N Nano Router - 123 - 2. Type the path and file name of the update file into the File field, or click the Bro w se button to locate the update file. 3. Click the Upgrade button. ) Note: 1. New firmware vers ions are posted at http://www.tp-link.com and can be downloaded for free. There is no need to upgrade the firmware u[...]

TL-WR702N 150Mbps Wireless N Nano Router - 124 - 6.8.4 Backup & Restore Choose menu “ System T ools → Backup & Restore ”, and then you can save the curren t configuration of the Rout er as a backup file and restore the configuration via a backup file as shown in Figure 6-20. Figure 6-20 Backup & Restore Configu ration ¾ Click the[...]

TL-WR702N 150Mbps Wireless N Nano Router - 125 - • Change the Wireless configurations. • Change the Web Management Port. • Upgrade the firmware of the Router (system will reboot automatically). • Restore the Router's settings to factory defaults (syste m will reboot automatically). • Update the configuration with the f ile (system wi[...]

TL-WR702N 150Mbps Wireless N Nano Router - 126 - 6.8.7 System Log Choose menu “ System T ools → System Log ”, and then you can view the logs of the Router. Figure 6-23 System Log ¾ Refresh - Refresh the page to show the latest log list. ¾ Clear All - All the logs will be deleted from the R outer permanently, not just from the page.[...]

TL-WR702N 150Mbps Wireless N Nano Router - 127 - Chapter 7. Configuration for Bridge Mode This chapter will show each Web p age's key f unctions and the configurat ion way for Bridge Mode of TL-WR702N. 7.1 Login After your successful login, you can configur e and manage the device. T here are main menus on the left of the web-based utility . S[...]

TL-WR702N 150Mbps Wireless N Nano Router - 128 - Figure 7-2 S tatus ¾ Firmware V ersion - The version information of the Router ’s firmware. ¾ Hardware V ersion - The version information of the Router ’s hardware. ¾ LAN - This field displays the current settings or information for the LA N, you can configure them in the Network > LAN page[...]

TL-WR702N 150Mbps Wireless N Nano Router - 129 - • Channel Wid th - The current wireless channel width in use. • MAC address - The physical address of the Router , as seen from the WLAN. • WDS St atus - The status of WDS connection. ¾ Syst em Up Time - The length of the time since the Router was last power ed on or reset. Click the Refresh b[...]

TL-WR702N 150Mbps Wireless N Nano Router - 130 - Figure 7-4 7.5 Network Figure 7-5 the Network menu There is only one submenu under the Network menu (shown in Figure 7-5): LAN . 7.5.1 LAN Choose menu “ Network → LAN ”, and then you can conf igure the IP parameters of th e LAN on the screen as below . Figure 7-6 LAN ¾ Address T ype - Choosing[...]

TL-WR702N 150Mbps Wireless N Nano Router - 131 - server in this device will not start up. 3. If the new LAN IP address you set is not in the same subnet with the previous one, the IP Address pool in the DHCP server will be configur ed automatically , but t he V irtual Server and DMZ Host will not take effect until they are re-confi gured. 7.6 Wirel[...]

TL-WR702N 150Mbps Wireless N Nano Router - 132 - ¾ SSID - Enter a string of up to 32 characters. The same name of SSID (Service Set Identification) must be assigned to all wireless devices in your network. The default SSID is set to be TP-LINK_XXXXXX (XXXX XX indicates the last unique six numbers of each Router’s MAC address). But it is recomm e[...]

TL-WR702N 150Mbps Wireless N Nano Router - 133 - ¾ WDS Mode - This field determines which WDS Mode will be used. It is not necessary to change the WDS Mode unless you not ice network communication problems with root AP. If you select Auto, then Router will choos e the appropriate WDS Mode automatically. ¾ Security Type - This option should be cho[...]

TL-WR702N 150Mbps Wireless N Nano Router - 134 - Figure 7-9 Wireless Se curity ¾ Disable Security - The wireless security function can be enabled or disabled . If disabled, the wireless stations will be able to con nect the Ro uter without encryption. But it’s strongl y recommended to choose one of the following modes to enable security. ¾ WEP [...]

TL-WR702N 150Mbps Wireless N Nano Router - 135 - • WEP Key (Password) - Select which of the four keys will be used and enter the matching WEP key that you create. Make sure these val ues are identical on all wireless stations in your network. • Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for encryption. "[...]

TL-WR702N 150Mbps Wireless N Nano Router - 136 - For ASCII , the key can be made up of any numbe rs 0 to 9 and any letters A to Z, the length should be between 8 and 63 characters. For Hexadecimal , the key can be made up of any numbers 0 to 9 and letters A to F, the length should be between 8 and 64 characters. Please also note the key is case sen[...]

TL-WR702N 150Mbps Wireless N Nano Router - 137 - Figure 7-1 1 DHCP Settings Figure 7-12 DHCP Setting s ¾ DHCP Server - Enable or Disable the DHCP server . If you disable the Server , you must have another DHCP server within your network o r else you must configure the computer manually . ¾ St art IP Address - S pecify an IP address for the DHCP S[...]

TL-WR702N 150Mbps Wireless N Nano Router - 138 - amount of time in minutes and t he user will be "leased" this dynamic IP Address. After the time is up, the user will be automatically assigned a new dynam ic IP address. The range of the time is 1 ~ 2880 minutes. The default value is 120 minutes. ¾ Default Gateway (Optional) - It is sugge[...]

TL-WR702N 150Mbps Wireless N Nano Router - 139 - 7.7.3 Address Reservation Choose menu “ DHCP → Address Reserv ation ”, and then you can view and add a reserved address for clients via the next screen (shown in Figure 7-14).When you s pecify a reserved IP address for a PC on the LAN, that PC will always receive the same IP address each time w[...]

TL-WR702N 150Mbps Wireless N Nano Router - 140 - 2. Modify the information. 3. Click the Save button. Click the Enable/Disabled All button to make all entries enabled/disabled. Click the Delete All button to delete all entries. Click the Next button to go to the next page and Click the Previous button to return the previous page. 7.8 System T ools [...]

TL-WR702N 150Mbps Wireless N Nano Router - 141 - Figure 7-17 Diagnostic T ools ¾ Diagnostic T ool - Check the radio button to select one diagnostic tool. • Ping - This diagnostic tool troubles hoots connectivity , reachabilit y , and name resolution to a given host or gateway . • T raceroute - This diagnostic tool tests the performance of a co[...]

TL-WR702N 150Mbps Wireless N Nano Router - 142 - ¾ T raceroute Max TTL - The max num ber of hops for a T r aceroute connection. The default is 20. Click St a rt to check the connectivity of the Internet. The Diagnostic Result s page displays the result of diagnosis. If the result is similar to the following screen, the connectivity of t he Interne[...]

TL-WR702N 150Mbps Wireless N Nano Router - 143 - 2. Type the path and file name of the update file into the File field, or click the Bro w se button to locate the update file. 3. Click the Upgrade button. ) Note: 1. New firmware vers ions are posted at http://www.tp-link.com and can be downloaded for free. There is no need to upgrade the firmware u[...]

TL-WR702N 150Mbps Wireless N Nano Router - 144 - 7.8.4 Backup & Restore Choose menu “ System T ools → Backup & Restore ”, and then you can save the curren t configuration of the Rout er as a backup file and restore the configuration via a backup file as shown in Figure 7-21. Figure 7-21 Backup & Restore Configu ration ¾ Click the[...]

TL-WR702N 150Mbps Wireless N Nano Router - 145 - • Change the Wireless configurations. • Change the Web Management Port. • Upgrade the firmware of the Router (system will reboot automatically). • Restore the Router's settings to factory defaults (syste m will reboot automatically). • Update the configuration wi th the file (system wi[...]

TL-WR702N 150Mbps Wireless N Nano Router - 146 - 7.8.7 System Log Choose menu “ System T ools → System Log ”, and then you can view the logs of the Router. Figure 7-24 System Log ¾ Refresh - Refresh the page to show the latest log list. ¾ Clear All - All the logs will be deleted from the R outer permanently, not just from the page.[...]

TL-WR702N 150Mbps Wireless N Nano Router - 147 - Chapter 8. Configuration for Client Mode This chapter will show each Web p age's key func tions and the configuratio n way for Client Mode of TL-WR702N. 8.1 Login After your successful login, you can configur e and manage the device. T here are main menus on the left of the web-based utility . S[...]

TL-WR702N 150Mbps Wireless N Nano Router - 148 - Figure 8-2 S tatus ¾ Firmware V ersion - The version information of the Router ’s firmware. ¾ Hardware V ersion - The version information of the Router ’s hardware. ¾ LAN - This field displays the current settings or information for the LA N, you can configure them in the Network > LAN page[...]

TL-WR702N 150Mbps Wireless N Nano Router - 149 - 8.4 Wo rking Mode The Router supports fi ve operation mode types: AP, Router , Repeater , Bridge and Client . Please select one your want. Click Save to save your choice, which is shown as Figure 8-3. Figure 8-3 W orking Mode ¾ AP - The wireless access point mode. ¾ Router - The wireless Router Mod[...]

TL-WR702N 150Mbps Wireless N Nano Router - 150 - 8.5.1 LAN Choose menu “ Network → LAN ”, and then you can conf igure the IP parameters of th e LAN on the screen as below . Figure 8-6 LAN ¾ Address T ype - Choosing Smart IP(DHCP) to get IP address from DHCP server , or choosing St atic IP to configure IP address manually . ¾ MAC Address - T[...]

TL-WR702N 150Mbps Wireless N Nano Router - 151 - 8.6.1 Wireless Settings Choose menu “ Wir el es s → Wireless Settings ”, and then you can confi gure the basic settings for the wireless network on this page. Figure 8-8 Wireless Setting s - Client ¾ SSID - Enter a string of up to 32 characters. The same name of SSID (Service Set Identificatio[...]

TL-WR702N 150Mbps Wireless N Nano Router - 152 - ¾ WDS Mode - This field determines which WDS Mode will be used. It is not necessary to change the WDS Mode unless you not ice network communication problems with root AP. If you select Auto, then Router will choos e the appropriate WDS Mode automatically. ¾ Security Type - This option should be cho[...]

TL-WR702N 150Mbps Wireless N Nano Router - 153 - 8.7.1 DHCP Settings Choose menu “ DHCP → DHCP Setti ngs ”, and you can see the page as shown in Figure 8-10, if you have chose Smart IP(DHCP) in Netw ork → LAN , in which situation the device will help you configure the DHCP automatic ally as you need. If you hav e ch ose S tatic IP in Netw o[...]

TL-WR702N 150Mbps Wireless N Nano Router - 154 - ¾ DHCP Server - Enable or Disable the DHCP server . If you disable the Server , you must have another DHCP server within your network o r else you must configure the computer manually . ¾ St art IP Address - S pecify an IP address for the DHCP Server to start with when assigning IP addresses. 192.1[...]

TL-WR702N 150Mbps Wireless N Nano Router - 155 - ¾ Assigned IP - The IP address that the Router has allocated to the DHCP client ¾ Lease Time - The time of the DHCP cli ent leased. After the dynami c IP address has expir ed, a new dynamic IP address will be autom atically assigned to the user. You cannot change any of the val ues on this page. To[...]

TL-WR702N 150Mbps Wireless N Nano Router - 156 - Figure 8-14 Add or Modify an Address Reservation Entry To modify or delete an existing entry: 1. Click the Modify in the entry you want to modify . If you want to delete the entry , click the Delete . 2. Modify the information. 3. Click the Save button. Click the Enable/Disabled All button to make al[...]

TL-WR702N 150Mbps Wireless N Nano Router - 157 - Figure 8-16 Diagnostic T ools ¾ Diagnostic T ool - Check the radio button to select one diagnostic tool. • Ping - This diagnostic tool troubles hoots connectivity , reachabilit y , and name resolution to a given host or gateway . • T raceroute - This diagnostic tool tests the performance of a co[...]

TL-WR702N 150Mbps Wireless N Nano Router - 158 - ¾ T raceroute Max TTL - The max num ber of hops for a T r aceroute connection. The default is 20. Click St a rt to check the connectivity of the Internet. The Diagnostic Result s page displays the result of diagnosis. If the result is similar to the following screen, the connectivity of t he Interne[...]

TL-WR702N 150Mbps Wireless N Nano Router - 159 - 2. Type the path and file name of the update file into the File field, or click the Bro w se button to locate the update file. 3. Click the Upgrade button. ) Note: 1. New firmware vers ions are posted at http://www.tp-link.com and can be downloaded for free. There is no need to upgrade the firmware u[...]

TL-WR702N 150Mbps Wireless N Nano Router - 160 - 8.8.4 Backup & Restore Choose menu “ System T ools → Backup & Restore ”, and then you can save the curren t configuration of the Rout er as a backup file and restore the configuration via a backup file as shown in Figure 8-20. Figure 8-20 Backup & Restore Configu ration ¾ Click the[...]

TL-WR702N 150Mbps Wireless N Nano Router - 161 - • Change the Wireless configurations. • Change the Web Management Port. • Upgrade the firmware of the Router (system will reboot automatically). • Restore the Router's settings to factory defaults (syste m will reboot automatically). • Update the configuration wi th the file (system wi[...]

TL-WR702N 150Mbps Wireless N Nano Router - 162 - 8.8.7 System Log Choose menu “ System T ools → System Log ”, and then you can view the logs of the Router. Figure 8-23 System Log ¾ Refresh - Refresh the page to show the latest log list. ¾ Clear All - All the logs will be deleted from the R outer permanently, not just from the page.[...]

TL-WR702N 150Mbps Wireless N Nano Router - 163 - Appendix A: FAQ 1. How do I configure the Router to access the Internet by ADSL users? 1) First, configure the ADSL Modem configured in RFC1483 bridge model. 2) Connect the Ethernet cable from your AD SL Modem to the W AN port on the Router . The telephone cord plugs into the Line port of the ADSL Mo[...]

TL-WR702N 150Mbps Wireless N Nano Router - 164 - 2. How do I configure the Router to access the Internet by Ethernet users? 1) Log in to the Router , click the “ Network ” menu on the left of your browser , and click " WA N " subm enu. On the WA N page, select “Dynamic IP” for "W AN Connection T ype", finish by clicking [...]

TL-WR702N 150Mbps Wireless N Nano Router - 165 - Figure A-4 Virtual Servers Figure A-5 Add or Modify a Virtual server Entry ) Note: Your opposite side should call your WAN IP , which is displayed on the “Status” page. 4) How to enable DMZ Host: Log in to the Router , click the “ Forwarding ” menu on the left of your browser , and click &quo[...]

TL-WR702N 150Mbps Wireless N Nano Router - 166 - 4. I want to build a WEB Server on the LAN, what should I do? 1) Because the WEB Server port 80 will inte rfere with the WEB management port 80 on the Router , you must change the WEB management port number to avoid interference. 2) T o change the WEB management port number : Log in to the Router , c[...]

TL-WR702N 150Mbps Wireless N Nano Router - 167 - Figure A-9 Add or Modify a Virtual server Entry 5. The wireless stations cannot connect to the Router . 1) Make sure the " Enable Wireless Router Radio " is checked. 2) Make sure that the wireless stations' SSID accord with the Router's SSID. 3) Make sure the wireless stations hav[...]

TL-WR702N 150Mbps Wireless N Nano Router - 168 - Appendix B: Configuring the PC In this section, we’ll introduce how to inst all and configure the TCP/IP correctly in Windows XP . First make sure your Ethernet Ada pter is work ing, refer to the adapter ’s manual if necessary . 1. Configure TCP/IP component 1) On the Windows taskbar , click the [...]

TL-WR702N 150Mbps Wireless N Nano Router - 169 - Figure B-2 5) The following TCP/IP Properties window will display and the I P Address tab is open on this window by default. Now you have two ways to configure the TCP/IP protocol below: ¾ Setting IP address automatically Select Obtain an IP address automatically , Choose Obt ain DNS server automati[...]

TL-WR702N 150Mbps Wireless N Nano Router - 170 - Figure B-3 ) Note: For Windows 98 OS or before, the PC and Router may need to be restarted. ¾ Setting IP address manually 1 Select Use the following IP address radio button. And the fo llowing items available 2 If the Router's LAN IP addre ss is 192.168.0.254, specify the IP address as 192.168.[...]

TL-WR702N 150Mbps Wireless N Nano Router - 171 - Now: Click OK to keep your settings.[...]

TL-WR702N 150Mbps Wireless N Nano Router - 172 - Appendix C: Specifications General S tandards IEEE 802.1 1n, 802.1 1b, 802.1 1g Protocols TCP/IP , PPPoE, DHCP , ICMP , NA T , SNTP Port One 10/100Mbps LAN/W AN port, one USB port 10BASE-T : UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100 Ω STP (maximum 100m) Cabling T ype 100BASE-TX: UTP[...]

TL-WR702N 150Mbps Wireless N Nano Router - 173 - Appendix D: Glossary ¾ 802.11n - 802.11n builds upon previous 802.11 standards by adding MIMO (multiple-input multiple-output). MIMO uses mu ltiple transmitter and receiver an tennas to allow for increased data throughput via spatial multiplexing and incr eas ed range by exploiting the spatial diver[...]

TL-WR702N 150Mbps Wireless N Nano Router - 174 - ¾ PPPoE ( P oint to P oint P rotocol o ver E thernet) - PPPoE is a protocol for co nnecting remote hosts to the Internet over an always-on connection by simulating a dial-up connection. ¾ SSID - A S ervice S et Id entification is a thirty-two char acter (maximum) alphan umeric key identifying a wir[...]