Tyco 8200-2646-00 B0 Bedienungsanleitung

Part Number: 8200-26 46-0 0 B0 V ideoEdge IP Box Camera Inst allation & Operation Guide V ersion1.5[...]

[...]

Copyright Under copyright laws, the contents of this manual may not be copied, photocopied, r eproduced, translated or reduced to any electronic medium or machine-readable form, in whole or in part, without prior written consent of Tyco Internat ional Ltd. © Copyright 2009 and its Respective Companies. All Rights Reserved, American Dynamics 6600 C[...]

4 Installation a nd Operation Guide Table Of Contents SAFETY PRECAUTIONS ............................................................................. 6 1. PRODUCT FEATURES............................................................................. 7 1.1 P RODUCT I NSTRUCTIONS ..................................................................... 7[...]

Installation a nd Operation Guide 5 4.5 TCP/IP CONFIGURA TION SETTING ...................................................... 25 4.6 C ONNECTION T ESTING ....................................................................... 27 5. Operation Instructi ons for the Network............................................... 29 5.1 M ICROSOFT I NTERNET E XP[...]

6 Installation a nd Operation Guide SAFETY PRECAUTIONS All the follow ing safety and operational instru ctions to prevent harm or injur y to the operator(s) or other person s should be read carefull y before the unit is ac tivated. W ARNING  T o prevent fire or shock hazard, a void exposing this unit to rai n or moisture.  Do not block ventil[...]

Installation a nd Operation Guide 7 1. PRODUCT FEA TURES 1.1 Product Instructions The VideoEdge IP Box Camera ADCIPEB is a user-friendly device wh ich combines cutting-edge sophistication with practical reliability and c onvenience, high performance with smooth remote communication. Just plug in the network c able and you’ll get live streaming vi[...]

8 Installation a nd Operation Guide 1.2 Product Features • 1/3" SONY Super HAD CCD. • Mechanical IR Cut Filter. • MPEG4 / MJPEG video compression. • High resolution: 520 TV • Embedded web server. • Supports a built-in microphone. • Supports motion detection. • Supports the SD card for alarms & scheduled recording. • Suppo[...]

Installation a nd Operation Guide 9 Image: ‧ Image frame rate: up to 30 (25) frames/second. ‧ Supports two compression modes, the Motion - JPEG and the MPEG4. ‧ 5 levels of compression provided. The file size of an M-JPEG compressed image depends on the image’s actual content. Images with a lot of detail w ill generate bigger files. The lev[...]

10 Installation and Opera tion Guide Dimensions / Weight Dimensions and weight are as follows. ‧ Height: 55 (mm) ‧ Width: 95 (mm) ‧ Length: 62 (mm) ‧ Weight: 306 g (Not including power supply and mini-tripod.) Accessories Included: ‧ CD-R x 1 ‧ Power supply: 12V DC/2A. ‧ Instruction manual.[...]

Installation a nd Operation Guide 11 2. DESCRIPTION OF THE FRONT/RE AR VIEW 2.1 Front Panel and Re ar Panel -- Front Panel -- -- Rear Panel -- 1 2 3 4 5 6 7 8 1 MICROPHONE: The IP camera has an additional audio function. The device has a microphone built into its front p anel which records sound. 2 Plug Inlet: An AC 24V or a DC 12V inlet that conne[...]

12 Installation and Opera tion Guide 2.2 Flank Panel -- Left Flank Panel -- -- Right Flank Panel -- 12 3 4 5 6 7 1. Lens Mount: This IP camera is used with either a C or a CS m ount lens. 2. DIP Switch: 1. AES: Auto electric shutter . 2. DC IRIS: Use an auto iris (DC drive) 3. DHCP: Turn On / Turn Off to use the DHCP protocol. If the switch points [...]

Installation a nd Operation Guide 13 Alarm wiring diagram: 4. RESET : R ecover to factory default. 5. 5pin MINI USB Port : The user can use a USB device cable to connect the IP camera to the USB port on the PC . 6. ALC VR: Iris control VR. When an auto iris (DC Drive) lens is used, this VR is used to adjust the iris for different lighting environme[...]

14 Installation and Opera tion Guide 2.3 The USB function By connecting the IP camera with a PC via the USB connector, the IP camera can provide two different functions. 1. Insert an SD card: As a card re ader . Insert an SD card into the IP camera, then connect to the PC. Y ou mi ght transfer files between the SD card and the PC. Once you've [...]

Installation a nd Operation Guide 15 2.4 Bracket mount inst allation The underside of the camera has a screw hole for attaching the bracket to the camera. Please follow the steps below to install the camera on the bracket. Step 1: Rotate the screw in the bracket to fix the bracket to the camera. Step 2: Fix the bracket to the ceiling. Step 3: Rotat[...]

16 Installation and Opera tion Guide 3. INST ALLA TION Please follow the instructions and the diagram below to set up the system. NOTE: The IP camera is link ed by its Video Out connection via a BNC connector to a monitor's Video In co nnection. If this c onnection is there, you can see s ome information on the mo nitor screen, such as the IP [...]

Installation a nd Operation Guide 17 3.3 CONNECTING WITH A MUL TIPLEXER LAN CAMERA 1 LAN CAMERA 2 LAN CAMERA 16 TO LAN CAMERA VIDEO OUT BNC CONNECTOR 3.4 UPDA TING SYSTEM SOFTWA RE If the system software of the IP camera needs to be upgraded, please take the following steps to safely process it. NOTE: Before carr ying out the follow ing procedures,[...]

18 Installation and Opera tion Guide If the message "UPDATE NG RESET PLEASE" a ppears rather than "UPDATE OK RESET PLEASE", please write down the error mess ages shown on the screen and inform your technical support, while ignoring the following steps. 7. Power off the IP camera when this update process is finished, then remove [...]

Installation a nd Operation Guide 19 3.5 IP camera SD car d Troubleshooting 1. Check if the SD card position is correct or not. Please refer to the manual for the re lated information. 2. Correctly insert the SD card after powering the IP camera on. T he "SD" icon displays in the upper-right corner of the monitor screen. If not, it means [...]

20 Installation and Opera tion Guide 4. Network Configuration 4.1 Cable Connection s Please follow the instructions below to connect y our IP camera to a computer or a network and to choose a proper RJ-45 cable configuration for connections. Physical specifications of the R J-45 cable for Ethernet Wire T ype Cat. 5 Connec tor T ype RJ-45 Max. Cable[...]

Installation a nd Operation Guide 21 4.1.2 Connect to a LAN Hub (I NTRANET) The RJ-45 PIN configuration for connec ting with a LAN Hub is shown below . RJ-45 LAN CAMERA TO PC NETWORK CARD uplink[...]

22 Installation and Opera tion Guide 4.2 Configure Y our IP Camera Ne twork Settings Upon connecting with the network hardware, you need to activate the net work function and configure the proper network settings of the IP camera. 4.2.1 Enable DHCP Function This function can onl y work if the LAN, which t he unit is connected to, has a DHCP server [...]

Installation a nd Operation Guide 23 NOTE: When c onnecting to a network, each c onnected IP camera must be assigned a unique IP , which must be i n the same class type as your network address. IP addresses are written as four sets of numbers sep arated by periods; for example, 192.168.1.1 Therefore, if the connecte d network is identified as Class[...]

24 Installation and Opera tion Guide 4.3 TCP/IP Communication Sof tw are Follow the procedure below to install the TCP /IP communication program in y our computer . 1. Open the Start menu from your computer, and select the Settings/Control Panel option. 2. Double click the Network icon to enter the windows. 3. Click on the Configuration tag, and ch[...]

Installation a nd Operation Guide 25 components list. If the TCP/IP is included, please process section 4.5. If it is not included, please follow section 4.4 to install the TCP/IP . 4.4 TCP/IP Ins tallation During the installation, you will be requested to insert the Windows CD-ROM. After installation, the PC may be restarted. 4.5 TCP/IP configurat[...]

26 Installation and Opera tion Guide 2. Select TCP/IP , and then click Properties . NOTE: Before pr ocessing the IP camera installation in a W AN, please make s ure the Internet connection w orks properly . If not, please con tact your ISP provider . 　 If you are using a DHCP server , please select Obtain an IP address automatically . Any assigne[...]

Installation a nd Operation Guide 27 4.6 Connection T esting With the previous settings, follow the instructi ons below to ensure whether you have established the connection successfully . 1. Click Start → Programs → MS-DOS Prompt 2. Enter ping 192.168.1.168, then enter . (See the sample screen below). ** This is the IP address of IP camera tha[...]

28 Installation and Opera tion Guide If you receive a response as in the sa mple screen below , the connection hasn’t been successfully established. Please re-check all t he hardware and software inst allations by repeating sections 4.4 and 4.5. If you still can’t establish the connection af ter rechecking, please contact your dealer . If you r[...]

Installation a nd Operation Guide 29 5. Operation Instructions for the Ne t w ork The Microsoft Internet Explorer in a PC provi des the functions of moni toring remote z ones or watching recorded data through the TCP/IP prot ocol. The det ails are listed as follows. RJ-45 PIN configuration for Ethernet PIN NO. PIN Assignment 1. TX + 2. TX - 3. RX +[...]

30 Installation and Opera tion Guide 5.1 Microsof t Internet Explorer 5.1.1 Connecting the IP camera 1. S tart up Microsoft Internet Explorer , and th en follow the steps below to connect the IP camera. 2. Click on the URL block at the top of the window . 3. Enter the URL address of the IP ca mera into the URL block and press the “ Enter ” butt[...]

Installation a nd Operation Guide 31 Browsing images from th e IP camera The images from the IP camera are displayed on the home page when online with the IP camera. There are also additional settings provided on the home page. MJPEG mode or MP EG4 mode display different display formats on their home page. Homepage of MJPEG mode Homepage of MPEG4 m[...]

32 Installation and Opera tion Guide 5.1.2 Change Video Setting Please follow the steps below to change the image setting through the network as necessary . 1. Click on the Vide o button on the home page to enter the image-sett ing page. Video setting page of MJPEG mode Video setting page of MPEG4 mode 2. Adjust the image setting including “Devic[...]

Installation a nd Operation Guide 33 5. Click on the Privacy Mask button to enter the Privacy Mask page. 6. Click on the Day & Night button to enter the Day & Night page. i. Click on the drop-down list to choose the Day & Night mode of “Auto”, “Da y mode”, “Night mode” and “Schedule”. ii. Set the values of Focus Adjust a[...]

34 Installation and Opera tion Guide to set the period of the focus adjustme nt at “30 seconds”, “1 minute”, “2 min utes”, “3 minutes”, “5 minutes”, and “10 min utes”, or just select “disab le” to deactivate the function. NOTE: In the “Sched ule” mode, you can click t he icon to set the Da y or Night mode of each hou[...]

Installation a nd Operation Guide 35 Frame rate: Click on the drop-down list to choose the frame rates of “5FPS”, “10FPS”, “15FPS”, “24FPS” or “(25) 30FPS” . Format: Click to choose the “MJPEG” or the “MPEG4” mode. Fine T une mode: White Balance: Scroll to choose the mode from “Auto”, “Fluorescent (3200K)”, “In[...]

36 Installation and Opera tion Guide 5.1.3 Change the Netw ork Setting Please follow the steps below to change the netwo rk setting through the network as necessary .  Set the network options and IP address. 1. Click on the Network button in the home page to enter the Network page. 2. The accessible networks here are the “FTP” ( for P AL onl[...]

Installation a nd Operation Guide 37 Description of function ke ys: IP A ddress: Enter the 4-byte IP Address in the appropriate bl ank space (the value in each box may be anywhere bet ween 0 and 255). Every IP camera has to own an IP address to be identified on the network. Netmask: Enter the 4-byte Subnet Mask in the required blank spaces (usually[...]

38 Installation and Opera tion Guide  Change the Network Setting — FTP (MJPEG mode only). Please follow the steps below to change the FTP setting via the network as necessary , to upload recording data live. (*FTP function is for P AL version only .) 1. Click on the FTP button on the upper left menu to enter the “FTP Server Setting” page. [...]

Installation a nd Operation Guide 39  Change the Network Setting — SMTP (MJPEG m ode only). Please follow the steps below to change the SMTP setting through the network as necessary . (*SMTP function is for P AL version onl y .) 1. Click on the SMTP button on the upper left menu to enter the “SMTP Server Setting” page. 2. Click “My Serve[...]

40 Installation and Opera tion Guide  Change the Network Setting — SNTP . Please follow the steps below to change the SNTP setting through the network as necessary . 1. Click on the SNTP button on the upper left menu to enter the “SNTP Server Setting” page. 2. Enter the IP Address of the SNTP server , and choose one of the time zones as an[...]

Installation a nd Operation Guide 41  Change the Network Setting — DDNS. The “Network” page has, on its upper left, the “DDNS” icon. Please follow the step s below to change the DDNS setting through the network as necessary . 1. Click on the DDNS button on the upper left menu to enter the “DDNS Setting” page. 2. Click “Enable DDN[...]

42 Installation and Opera tion Guide Description of function ke ys: Enable DDNS Function: Checkmark to activate the function. DDNS T ype: Click to open the list of two DDNS modes to choos e from: “DynDNS ” and “hn”. Click on the “Apply” button and connect this webs ite automatically and enter it. Enter your dynamic IP Address and Email [...]

Installation a nd Operation Guide 43  Change the Network Setting — PPPoE. The “Network” page has, on its upper left, the “PPPoE” icon. Please follow the steps below to change the PPPoE setting through the network as necessary . 1. Click on the PPPoE button on the upper left menu to enter the “PPPoE Setting” page. 2. Click on the ?[...]

44 Installation and Opera tion Guide  Change the Network Setting —UPnP . The “Network” page has, on its upper left, the “UPnP” icon. Please follow the step s below to change the UPnP setting through the network as necessary . 1. Click on the UPnP button on the upper left menu to enter the “Universal Plug and Play” page. 2. Click ?[...]

Installation a nd Operation Guide 45  Change the Network Setting — IP Filter The “Network” page has, on its upper left, the “IP Filter” icon. Please follow the step s below t o change the IP Filter setting through the network as necessary . 1. Click on the IP Filter button on the upper left menu to enter the “Network Setting” page.[...]

46 Installation and Opera tion Guide  Change the Network Setting —Network T raffic. The “Network” page has, on its upper left, the “T raffic ” icon. Please follow the steps below to change the UPnP setting through the network as necessary . 1. Click on the T raffic button on the upper left menu to enter the “Network T raffic” page.[...]

Installation a nd Operation Guide 47 5.1.4 Change the System S etting Please follow the steps below to change the date and ti me of the system setting through the network as necessary .  Set the Date and Time of the system 1. Click on the System button in the home page to enter the “Date And T ime” page (default). 2. Choose one of the three [...]

48 Installation and Opera tion Guide  Change the System Setting — Timest a mp. Please follow the steps below to change/add the timestamp through the network as necessary . 1. Click on the Timest amp button o n the left side of the “System - Date and T ime” page to enter t he “System - T imestamp” page. 2. Click “ Enable Timest am p ?[...]

Installation a nd Operation Guide 49  Change the System Setting — Users. Please follow the steps below to change/add the users’ authority through the network as necessary . 1. Click on the Users button on the left side of the “Date and T ime” page to enter the “Users” page. 2. Add, modify or delete any user ’s data as necessary . 3[...]

50 Installation and Opera tion Guide  Change the System Setting — Digital I/O. Please follow the steps below to change the Di gital I/O through the network as necessary . 1. Click on the Digit al I /O button on the left side of the “Date and T ime” page to enter the “Digital I/O Setting” page. 2. Mark the “Digital Input” “ON” o[...]

Installation a nd Operation Guide 51  Change the System Setting — Audio. Please follow the steps below to change the A udio setting through the network as necessary . 1. Click on the Audio button on the left side of the “Date and T ime” page to enter the “ Audio Setting” page. 2. Mark the “Audio” “ON” or “OFF”. 3. Click on [...]

52 Installation and Opera tion Guide  Change the System Setting — RS485 Setting. Click on the RS485 Setting button on the left side of the “Date and Time” p age to enter the “RS485 Setting” page. Description of function ke ys: Baud rate: Eight different speeds c an be used: 2400 baud per second, 4800 baud, 9600 baud, 19200 baud, 28800 [...]

Installation a nd Operation Guide 53  Change the System Setting — Update Firmware. Please follow the steps below to update the firmware through the network as necessary . 1. Click on the Up d ate Firmware button on the left side of the “Date and T i me” page to enter the “Update Firmware” page. 2. Click on the “Browse…” button to[...]

54 Installation and Opera tion Guide  View the Event Logs. Please follow the steps below to view event s through the network as necessary . 1. Click on the Even ts button on the upper left above to enter the “Event Log” page. 2. Choose one of the three buttons shown on the page to view an event when necessary . The three buttons are titled ?[...]

Installation a nd Operation Guide 55 5.1.5 Change the Application Setting Please follow the steps below to change the applic ation setting through the network as necessary .  Change the Ap plication Setting — FTP App lication Setting (MJPEG mode only). Please follow the steps below to change the FTP setting via the network as necessary to uplo[...]

56 Installation and Opera tion Guide  Change the Ap plication Setting — SD Card Application Setting. Please follow the steps below to change the SD CARD setting via the network as necessary , to upload recording data live. 1. Click on the SD card button on the top left to enter the “SD Card Application Setting” page. SD Card setting page o[...]

Installation a nd Operation Guide 57  Change the Ap plication Setting —SMTP A pplication Setting (MJPEG mode only). Please follow the steps below to change the SMTP setting via the network as necessary . (*SMTP function is for P AL version onl y .) 1. Click on the SMTP button on the left side to enter the “SMTP Application Setting” page. 2[...]

58 Installation and Opera tion Guide  Change the Ap plication Setting —Language Setting. Please follow the steps below to change the Language setting via the network as necessary . 1. Click on the Language button on the left side to enter the “Language Setting” page. You have an option as to which language to use. The default is “English[...]

Installation a nd Operation Guide 59  Change the Ap plication Setting —Rec ord Application Enable Setting. Please follow the steps below to change the setting via the network as necessary . 1. Click on the Enable Record button on the left side of the record to enter the “Record Application Enable Setting” page. Record setting page of MJPEG[...]

60 Installation and Opera tion Guide  Change the Ap plication Setting —Record - Schedule. 1. Click on the Application button on the home page to enter the “Re cord - Schedule” page. 2. Check/uncheck any/all of the first seven boxes se t vertically in the upper half of the “Schedule” page to enable/disable the programmed recording f unc[...]

Installation a nd Operation Guide 61  Change the Ap plication Setting — Al arm Application Enable Setting. Please follow the steps below to change the setting via the network as necessary . 1. Click on the Enable Alarm button on the left side of the record to enter the “Alarm Application Enable Setting” page. MJPEG mode MPEG4 mode 2. Click[...]

62 Installation and Opera tion Guide  Change the Ap plication Setting — Alarm - Motion Detection. Please follow the steps below to enable changes in the motion detection function of the alarm through the network as necessary . Set the motion detection: 1. Click on the Motion Detection bu tton on the left side of the Alarm to enter the “Alarm[...]

Installation a nd Operation Guide 63 5.1.6 Change the SD card Settin g Please follow the steps below to change the SD ca rd setting through the network as necessary .  Change the SD card Setting — FILELIST of MEMORY CARD. Please follow the steps below to change the setting via the network as necessary . 1. Click on the “SD card” button at [...]

64 Installation and Opera tion Guide 5.1.7 Change the Pan/Tilt setting 1. Click on the Pan/Tilt button on the home page to open the S peed Dome Controller . 2. Click “Configure” to enter to the RS485 setting page (please refer to Change the Syst em Setting — RS485 Setting). 3. Select a Speed Dome device ID from the drop-down list on the S pee[...]

Installation a nd Operation Guide 65 5.1.8 PPPoE & DDNS Using the PPPoE 1. Install the XDSL sof tware ( obtained from your ISP dealer) in your PC. 2. Search for your IP camera's IP address: you can connect the IP camera and the Video monitor . The monitor screen will show the IP address on its right sid e. 3. Change the s witch on the IP c[...]

66 Installation and Opera tion Guide T est: Go to the Internet. 1. Set your PC to enter the Internet. 2. Desktop → IE browser → Enter the IP camera IP address (the same address as in the PPPoE settings and step 3 above) → Y ou can see the IP camera images. DDNS settings 1. Check your IP camera’s IP address (monitor ) → open y our IE brows[...]

Installation a nd Operation Guide 67 5.1.9 The Bandw idth Calculator of the IP camera Y ou can use the calculator to obtain the rough bandwidth throughput for reference. Enter “ http://***.***.***.***/calculator .html ” into t he URL block and press the “Enter” button to enter the calculating page. (The ***.***.***.*** is the URL address of[...]

68 Installation and Opera tion Guide 6. ADV ANCED OPERA TION Question 1: How can I view the li ve images of the IP camera via Microsoft Internet Explorer on the Desktop PCs, or the lapto p computers, in a sit uation where there are no monitors or television? ◇ T o get the IP address of the IP camera without a monitor , use one of the follow ing t[...]

Installation a nd Operation Guide 69 3. Check on “Enable Alarm-Save into SD Card” to activate it. 4. Click the Submit button to submit the setting. NOTE: Please remember t o insert the SD card into the built-in SD slot of the unit first. ◇ Set the recording time (the A VI duration) of the SD card 1. Click the Application button in the home pa[...]

70 Installation and Opera tion Guide ◇ Set the PPPoE function 1. Click the Network button in the home page. 2. Click the PPPoE button on the left side of the page to enter the “PPPoE Setting” page. 3. Choose “ON” from the “PPPoE Mode” list to activate it. 4. Enter the Account and the Password which are p rovided from your ISP . 5. Cli[...]

Installation a nd Operation Guide 71 7. SPECIFICA TIONS ADCIPEB N VideoEdge IP Box Camera, 24V AC/12VDC, NTSC , w/PS ADCIPEBPE VideoE dge IP B ox Camera, 24V AC/12VDC , P AL, EU P lug, w/PS Model ADCIPEBPU VideoE dge IP B o x Camera, 24V AC/12VDC , P AL, UK P lug, w/PS Video sensor 1/3" Sony Super HAD CCD (with HQ1 DSP) System NTSC/ PAL Horizo[...]

72 Installation and Opera tion Guide Video output 1.0 Vpp, 75 ohm, composite, negative, BNC x 1 Alarm I/O 1 input / 1 output Serial port RS-485 SD card Alarm and Schedule recording / update USB Configuration / Update Connectors Reset Factory Default LED indicator Power / Network indicator Power requirement DC12V / AC24V** (6W) Operating Temperature[...]

Installation a nd Operation Guide 73 APPENDIX 1. –IP camera UPnP How T o The most troublesome issue when you setup a LANCam ® is that yo u have no idea what the IP address of this device is. Now LANCam ® support s the UPnP (Univers al Plug and Play) protocol which makes it easier for you to examine it; however , Microsoft Windows XP ® doesn’[...]

74 Installation and Opera tion Guide Figure 2 Step 2: When Control Panel appears, double-click the Netw ork Connections icon. The Network Connectio ns dialog box appears. See Figure 3. Figure 3 Step 3: Click the Protocols tab in the Network Connections dialog box. See Figure 4. Figure 4 Step 4: When the Local A r ea Connection Proper ties dialog bo[...]

Installation a nd Operation Guide 75 Figure 5 Step 5: In the Internet Protocol(TCP/IP) Properties dialog box, choose Use t he following IP Address to indicate that you do not wish to use DHCP , and assign IP Address 192.168.1.200 with Subnet mask 255.255.255.0. Click OK when you finish it. See Figure 6. Figure 6 Step 6: Choose Close to finish the m[...]

76 Installation and Opera tion Guide 2. Install UPnP Packets As described before, Microsoft Windows XP ® doesn’t start the UPnP service by default; however , we have to install some p a cket s before we initia lize it. The following steps will help you to inst all them. Step1: From the Start m en u , poin t to Set Program Access and Default , an[...]

Installation a nd Operation Guide 77 Figure 10 Step 4: Check UPnP User Inter face , and choose OK . See Figure 1 1. Figure 11 Step 5: When the original Network Component Wizard dialog box retu rns, click Next . See Figure12. Figure 12[...]

78 Installation and Opera tion Guide Step 6: Af ter about one minute the UPnP installation w ill be done, and choose Finish to close it. See Figure13. Figure 13 3. Turn on Ser vices After installation, you must turn on the relative services to start the UPnP protocol. Th e following procedures demonstrate this. Step 1: Fr om the Start menu, point t[...]

Installation a nd Operation Guide 79 Figure15 Step 3: Click on the Services icon in the Administrative T ools dialog box. See Figure16. Figure16 Step 4: When the Services dialog box shows up, double click the SSDP Discovery Service icon . See Figure17.[...]

80 Installation and Opera tion Guide Figure17 Step 5: Choose Auto ma t ic in the Startu p t yp e , and click OK to start it. See Figure18. Figure18 Step 6: When the Services dialog box appears a gain, double click the Uni versal Plug and Play Device Host icon. See Figure19.[...]

Installation a nd Operation Guide 81 Figure19 Step 7: Choose Auto ma t ic in the S tartup type, press the Start button, and click OK to start it. See Figure20. Figure20 Step 8: Restart your system.[...]

82 Installation and Opera tion Guide 4. Scan LANCams ® through M y Network Place After your installation and starting services, the UPnP protocol will take effect. You can scan all LANCams ® in My Network Place like Figure21 and Figure22 below. Figure21 Figure22 Just double click the UPnP MPEG4 IP camera the video live stream will pop up automati[...]

Installation a nd Operation Guide 83 APPENDIX 2. –The ARP function Setting the IP Address The Ethernet interface on the LANCam has a default IP address (192.168.1.168 ) that most likely needs to be changed to make it work on your lo cal network. You need to acquire a u nique IP address (ask your network administrator). For the initial setting of [...]

84 Installation and Opera tion Guide ARP and ping from U NIX or GNU/Linux: 1. Start a shell 2. Type the following as superuser (root): arp -s <IP address> <Ethernet address> [ or arp -s <IP address> < MAC address>] ping <IP address> Example: arp -s 192.168.1.100 00-0C-0C-0 0-00-01 ping 192.168.1.100 The device responds[...]

Installation a nd Operation Guide 85 APPENDIX 3. –Register as a DDNS member The DDNS （ dynamic domain name system ） is a function which is provided by an American company . Please refer to www.dyndns.com . This chapter provides the user with the basic instructions on how to register a free DDNS service. Registering for a DDNS Enter the URL ww[...]

86 Installation and Opera tion Guide Figure 2 Figure 3 Click “My Services” to enter the service page. Please click the “Add Host Service” item which is below the ”My Hosts“ item, as shown in Figure 4. Click “Add Host Service”, and its service items will appear . Th e Add Dynamic DNS Host item helps to add a new DDNS. Each member may[...]

Installation a nd Operation Guide 87 Figure 4 Figure 5 All we have to set in this page is the “H ostname” item. The user can choose a Sub Hostname as s/he likes from the right-hand side of the Hostname’s drop-down list. NOTE: Y ou don’t ha ve to set the “IP A ddress” in the same format as the camera’s IP Address. It will renew the IP [...]

88 Installation and Opera tion Guide Figure 6[...]

Installation a nd Operation Guide 89 APPENDIX 4. –MPEG4 Bit Rate Lookup T able of IP camera 1. When frame rate is higher than 15 frames/second (15 is not including): Highest High Medium Low Lowest FULL D1 3 2.5 2 1.5 1 VGA 2.63 2.25 1.75 1.31 0.88 2CIF 1.5 1.25 1 0.75 0.5 Half VGA 1.31 1.13 0.88 0.67 0.44 CIF 0.75 0.63 0.5 0.38 0.25 QVGA 0.66 0.5[...]

90 Installation and Opera tion Guide APPENDIX 5. –F AQ 1. How do I disable the DHCP function and use a static IP instead? A ： T urn up the “DIP SWITCH” from “3” to “4” and change the r elative network settings, the IP Address, NetMask and Gateway on the image web page. 2. Can the SD card be removed during recording? A ： No, it can[...]