Uniden EXR2460 Bedienungsanleitung

[...]

CO N T E N T S OF Y OUR O WNER’S MANU AL CONTENTS Introduction ................................................... 1 • W elcome ............................................................ 1 • Featur es ............................................................ 1 • Included in Y our Packag e .............................................. [...]

oduction WELCOME Congratulations on your pur chase of the Uniden EXR2460 cor dless telephone. This phone is designed for r eliability , long life, and outstanding performance utilizing the latest in 2.4 GHz Spr ead Spectrum technology . FEA TURES • 2.4 GHz Spread Spectrum T echnology • Caller ID and Call W aiting Caller ID • 50 Number Caller [...]

INCLUDED IN Y OUR P A CKA GE • This Owner’s Manual • Precautions and Im portant Safety Instructions • Registration Car d 2 W all Mounting Screws TIP T o get the most fr om your phone, please read this owner’s manual thor oughly . Also be sure to complete and mail the product registration form. NOTE If any of these items are missing or dam[...]

Installing and Adjusting YourPhone DESK/T ABLETOP INSTALLATION 1) Plug the A C adapter cord into the 1 0 V DC in put jack on the back of the base. 2) Wrap the A C adapter cord around the strain r elief notch. 3) Plug the AC adapter into a standar d 1 20 V AC w all outlet. 4) Charge the battery (refer to “Charging the Battery Pack, ” page 1 1). [...]

7) Attach the desktop stand to the base. 8) Set the base on a desk or tabletop and place the handset into the base. Then, raise the antenna to a vertical position. W ALL INST ALL ATION ▼ Standard wall plate mounting This phone can be mounted on any standar d telephone wall plate. 1) Remo ve the mounting adapter fr om the notches at the top of the[...]

3) Plug the A C adapter cord into the 1 0 V DC in put jack on the back of the base. 4 ) Put the A C adapter cord inside the molded wiring channel, then wrap it around the strain relief notch. Plug the A C adapter into a standard 1 20 V A C wall outlet. 5) Plug one end of the short telephone cord into the TEL LINE jack on the back of the base, then [...]

7) On the base unit, pull the handset retainer out of the slot and rotate it clockwise 1 80°. 8) Flip the retainer from fr ont to back, then slide it back into the slot so that the lip of the retainer f aces up and the ov al is at the bottom of the retainer . This will hold the handset in place. 6 ! If the handset beltclip is attached, you cannot [...]

▼ Direct wall mounting If you don't hav e a standard w all plate, you can mount y our phone directly to the w all. Befor e doing this, consider the follo wing: • Select a location away fr om electrical cables, pipes, or other items behind the mounting location. Inserting screws into areas such as this can be hazardous. • Try to mount you[...]

3) Rotate the mounting adapter 1 80° and snap it into place at the bottom of the base. 4) Plug the A C adapter cord into the 1 0 V DC in put jack on the back of the base. 5 ) Put the A C adapter cord inside the molded wiring channel, then wrap it around the strain relief notch. Plug the A C adapter into a standard 1 20V A C wall outlet. 6) Plug on[...]

7) Line up the mounting slots on the base with the mounting screws on the w all, then push in and down until the phone is firmly seated. 8) On the base unit, pull the handset retainer out of the slot and rotate it clockwise 1 80°. 9) Flip the retainer from fr ont to back, then slide it into the slot so that the lip of the retainer f aces up and th[...]

INST ALLING THE HANDSET BA TTERY P A C K 1) Press in on the battery cover r elease and slide the cov er down until it comes off. 2) Install the nick el-cadmium batter y with the label facing do wn. 3) Slide the batter y cov er on until it snaps into place. 10 ! Use only Uniden battery model (BT2499) supplied with your phone.[...]

CHARGIN G THE BATTER Y P A CK ▼ Initial batter y charging Befor e plugging the phone line into your new phone f or the first time, fully charge the battery pack for 1 2-1 5 hours without interruption. 1) Place the handset on the base. 2) Mak e sure that status LED lights. If the LED doesn’t light, check to see that the A C adapter is plugged in[...]

▼ Low batter y indicator When the batter y pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to sav e power . If the phone is not in use, Low Battery f lashes. If the phone is in use, Low Battery flashes and the handset beeps. Complete your conv ersation as quickly as possible and return the handset[...]

ADJUSTING THE HANDSET V OLUME CONTROLS ▼ Handset ringer volume When the phone is in standby mode, pressing the vo l ▲ or ▼ ke y o n the handset selects the handset ringer v olume. There are tw o ringer volume settings; high and lo w . T o select the high volume setting, press vo l ▲ . The handset displays Ringer High . T o select the low v [...]

INST ALLING THE BEL TCLIP ▼ T o attach the beltclip 1) Remo ve the slot co ver . 2) Insert the beltclip into the empty slot and press do wn until it clicks. ▼ T o remove the beltclip 1) Pull back on the release tab and pull the beltclip up. 2) Replace the slot co ver . Y ou can store either the beltclip or slot cov er on the bottom of the base.[...]

HEADSET INST ALL ATION Y our phone may be used with an optional headset, the U niden HS9 1 0. T o use this featur e, simply insert the headset plug into the headset jack. Y our headset is ready f or hands-free conv ersations. A UTOMA TIC DIGITAL CODE SECURITY T o prevent other parties from making unauthorized calls on y our phone line, a digital co[...]

Using YourNew Phone MAKING AND RECEIVIN G CALLS Handset On Base Handset Off Base T o answer a call 1) Pick up the handset. 2) If not in Autotalk Mode, press talk . 1) Press any k ey . 2) If not in Autotalk Mode, press talk . T o make a call 1) Pick up the handset. 2) Press talk . 3) Listen for the dial tone. 4) Dial the number . OR Dial the number [...]

STORING A PHONE NUMBER IN MEMOR Y 1) Remo ve the handset fr om the base. 2) Press and hold memory until the confirmation tone sounds. The following screen appears. 3) Use the : and ; keys or number k eypad to choose the memor y location where y ou would lik e to enter a number . 4) Press select . The follo wing screen appears, and a cursor flashes [...]

EDITING A PHONE NUMBER IN MEMOR Y F ollow these steps to edit a phone number that y ou have alr eady programmed into memory . 1) Remo ve the handset fr om the base. 2) Press and hold memory until the confirmation tone sounds. The display shows the Memory Store screen and an y saved numbers. 3) Use the : and ; k eys or number keypad to select the me[...]

9) Press select. The handset beeps and displays a confirmation screen. For example, if y ou store a name and number into memor y location number one, then the handset shows Memory 1 Stored . 1 0) The display then returns to the Memory Store screen. Y ou may select another number to edit (return to step 3) or y ou may press memory to return to stand[...]

8) Press select . There is a confirmation tone, and the handset displays Memory 1 Deleted . 9) The display then returns to the Memory Store screen. Y ou may select another number to delete (return to step 3) or y ou may press memory to return to standby . USING MEMOR Y DIALING F ollow the steps belo w to dial a number using a programmed memor y loc[...]

USING CALLER ID Y ou must subscribe to Caller ID from y our phone compan y in order to use this feature . ▼ Setting up Caller ID options There are thr ee Caller ID setup options available; they ar e Autotalk, CIDCW , and Ar ea Code. AutoT alk allows y ou to answer the phone without pressing the talk button. If the phone rings when Autotalk is o n[...]

▼ Screening your calls Caller ID allows y ou to review caller information bef ore y ou answer y our phone. After the f irst ring, the display shows the date, time, call count, name, and phone number of the caller . If your Caller ID service is number only , then the name does not appear on the second line. If a name or number is not available, th[...]

▼ Calling a Caller ID number 1) Press call id , and the Caller ID summar y screen appears. The screen sho ws the number of new messages and total messages. 2) Select the number that you w ould like to dial. Press ; to scan f or war d through the messages and : to scan backw ards through the list. 3) Press talk and the number automatically dials. [...]

▼ Deleting a Caller ID message T o delete a single Caller ID message, f ollow the steps belo w . 1) Press call id , and the Caller ID summar y screen appears. The screen sho ws the number of new messages and total messages. 2) Select the number that you w ould like to delete. Press ; to scan f or war d through the messages and : to scan backw ard[...]

4) A confirmation tone sounds, and the follo wing screen appears. 5) Press call id to return to standby . USING REDIAL The redial k ey redials the last number dialed. The redialed number can be up to 32 digits long. T o call the last number dialed from the handset, press talk , then press redial . or Press redial , then press talk . If any key is p[...]

USING THE P A GE FEATURE T o locate the handset (while it’s off the base), press page on the base. T o beep the handset for 5 seconds, press page on the base, and the handset displays paging. T o beep the handset for 60 seconds, press and hold page . Press talk on the handset to end paging. Press talk again to return to standby . 26 Paging[...]

Troubleshooting QUICK REFERENCE CHART If your phone is not perf orming to your expectations, please tr y these simple steps bef ore calling U niden customer service. If you are still unable to resolv e the problem, call customer service at (800) 297- 1 023. PROBLEM SUGGESTION The charge light w on’t come on when the handset is placed in the base.[...]

PROBLEM SUGGESTION The handset doesn’t ring or receiv e a page. • The Nick el-Cadmium batter y pack may be weak. Charg e the batter y on the base unit for 1 2-1 5 hours. • The handset may be too far aw ay from the base unit. • Place the base unit away fr om appliances or metal objects. • Place the handset back on the charging cradle for a[...]

Specifications GENER AL The EXR2460 complies with FCC P arts 1 5 and 68. Fr equency control: PLL Modulation: Direct Sequence Spread Spectrum; DBPSK Operating temperatur e: 0° to 50° C (+32° F to +1 22° F) BASE Fr equency: 2400 to 2483.5 MHz (20 channels) Po wer requir ements: 1 0 V 500 mA (from A C adapter) Size: 5- 1/2 in. (W) x 3-3/4in. (D) x[...]

AND FUN CTIONS CONTR OLS[...]

June1999 4,511,7614,523,058 4,595,795 4,797,916 5,381,460 5,426,690 5,434,9055,491,745 5,533,010 5,574,727 5,650,790 5,660,269 5,661,7805,663,981 5,671,248 5,717,312 5,754,407 5,768,345 5,787,3565,838,721[...]