ViewSonic PJ510 Bedienungsanleitung

PJ510 User Guide[...]

ViewSonic PJ510 i Content s For Your Records .......... ................. ................................................. .............. ............. 1 Features ................ ............................................... .......................................... ............. ....... 2 Projector Features ......... .........................[...]

ii ViewSonic PJ510 OPTION Menu ........ ........................................................... ............................ ........... 29 Lamp ............... ................................. .............................................. ............... ............. ....... 30 Replacing The Lamp ........ ...................................[...]

1 ViewSonic PJ510 Copyright © V iewSonic Corporation, 2003. All rights reserved. Apple, Mac and ADB registered tr ademarks of Apple Computer , Inc. Microsoft, W indows, W indows NT , and the W indows logo are registered trademarks of Microsoft Corporation in the United S tates and other countries. V iewSonic, the three birds logo A-CD-PJ510 and On[...]

ViewSonic PJ510 2 Features Projector Features This multimedia projector is used to project various computer signals as well as NTSC/P AL/ SECAM video signals onto a screen. Little space is required for installation and lar ge images can easily be realized. Ultra High Brightness Crisp, ultra-bright presentations is achieved by using a UHB (ultra hig[...]

3 ViewSonic PJ510 Part Names The Projector Projector (Front/Right) Fastening The Lens Cap T o avoid losing, please fasten the lens cap to the projector using the strap. 1 Fix the strap to the strap ring of lens cap, as the right drawing. 2 Put one piece of the strap into the groove on rivet, as the right drawing. 3 Push the rivet into the strap hol[...]

ViewSonic PJ510 4 Projector (Rear/Lef t) POWER indicator tells the state of power sup- ply . Refer to the section “T urning On/Off Power”. ST ANDBY/ON button prepares for turning the power on/off. Refer to the section “T urning On/Of f Power”. INPUT button toggles between the signal ports. AUDIO R port AUDIO L port (from a video equipmen t)[...]

5 ViewSonic PJ510 The Remote Control RGB button selects the input signal of RGB port . SEARCH button searches for an input signal between the following signal ports of RGB, VIDEO, S-VIDEO and COMPONENT VIDEO. AUTO button executes automatic adjustment (ST ANDBY/ON) button prepares for turning the power on/off. BLANK button blanks the screen temporar[...]

ViewSonic PJ510 6 Setting Up Arrangement Refer to the illustrations and tables below to determine the screen s i ze and projection distance. The values shown in the table are ca lculated for a full size screen: 800x600 a Distance from the projector to the screen (±10%) b Distance from the lens center to the bottom of the screen (±10%) c Distance [...]

7 ViewSonic PJ510 Adjusting The Projector ’ s Elevator Y ou can use the elevator feet to make adjustme nts if the surface on which you need to set the projector is uneven or if you othe rwise need to adjust the angle of projection. The adjustment range of the elevator feet is 0 to 9 degrees. 1 Press and hold in the elevator buttons. 2 Raise or lo[...]

ViewSonic PJ510 8 Connecting Y our Devices NOTE: About Plug-and-Pl ay Cap ability • This projector is compatible with VESA DDC 1/2B. Plug-an d-Play can be achieved by connecting this projector to computers that are VESA DDC (display data channel) compatible. Please take advantage of this function by connecting the accessory RGB cable to the RGB p[...]

9 ViewSonic PJ510 Please refer to the following for connecting your devices. See the rear of the project or . Y ou can see the ports. Connecting to a computer RGB out RGB cable (D-sub 15 pin) Audio out Audio cable (S tereo mini) RS-232C port RS-232C Cable If using a SCART RGB input, Video Audio out (L) Audio out (R) SCART SCART cable G out out port[...]

ViewSonic PJ510 10 Connecting Power Supply 1 Connect the connector of the power cord to the AC inlet of the projector . 2 Firmly plug the power cord’ s plug into the outlet. WA R N I N G • Please use extra caution when c onnecting the power cord as incorr ect or faulty connections may result in FIRE and/or ELECTRIC AL SHOCK. Please adhere to th[...]

11 ViewSonic PJ510 Remote Control Putting Batteries 1 Remove the battery cover . Slide back and remove the cover in the direction of the arrow . 2 Insert the batteries. Align and insert the two AA batteries according to their plus and minus terminals (as indicated in the remote control.). 3 Close the battery cover . Replace the cover in the directi[...]

ViewSonic PJ510 12 Operating The Remote Control • The remote control works with the projector ’ s remote sensor . • The range of the remote sensor is 3 meters with a 60-degree range (30 degrees to the left a nd right of the remote sensor). Also a remote signal reflected in the screen etc. may be available. If it is difficult to send a remote [...]

13 ViewSonic PJ510 Power ON/OFF T urning On The Power NOTE: T urn the power on/of f in right order . Please power on the projector before the connected devices. Power off the projector af ter the connected devices. 1 Make sure that the power cord is firmly and correctly connected to the projector and outlet. 2 When the lens cap is att ached, remove[...]

ViewSonic PJ510 14 Selecting An Input Signal 1 Using the projector ’ s control button Press the INPUT button. As illustrated below , each time you press the INPUT button, the projector switches between its input signal ports. Select the signal you wish to project. Selecting a RGB signal, using the remote control Press the RGB button. When this bu[...]

15 ViewSonic PJ510 T urning Off The Power NOTE: T urn the power on/of f in right order . Please power on the projector before the connected devices. Power off the projector af ter the connected devices. 1 Press the ST ANDBY/ON button of the projector or the remote control. The message “Power off?” will app ear on the screen for approximately 5 [...]

ViewSonic PJ510 16 Operating Adjusting The V olume 1 Press the VOLUME button. As illustrated on the right, a dialog box will appear on the screen to aid you in adjusting the volume. 2 Use the ( S ), ( T ) buttons to a djust the volume. Press the VOLUME button again to close the dialog box and complete this operation. (Even if you don't do anyt[...]

17 ViewSonic PJ510 Adjusting The Position 1 Press the POSITION button. As illustrated on the right, a dialog box will appear on the screen to aid you in adjusting the position. 2 Use the ( W ), ( X ), ( S ), ( T ) buttons to adjust the position. When you want to initialize the position, press the RESET button during adjustment. Press the POSITION b[...]

ViewSonic PJ510 18 Using The Automatic Adjustment Feature 1 Press the AUTO button. Automatic Adjustment for RGB Input Horizontal position (H.POS IT), vertical position (V .POSIT), clock phase (H.PHASE) and horizontal size (H.SIZ E) are automatically adjusted. Make sure that the application wi ndow is set to its maximum size prior to attempting to u[...]

19 ViewSonic PJ510 Using The Magnify Feature 1 Press the MAGNIFY (ON) button The projector enters MAGNIFY mode. 2 Press the POSITION button, then use the ( W ), ( X ), ( S ), ( T ) buttons to select the area to zoom. Press the POSITION button agai n to finalize the zoom area. 3 Use the ( S ), ( T ) buttons to adjust the zoom level Press the MAGNIFY[...]

ViewSonic PJ510 20 Signal Searching 1 Press the SEARCH button Cycles through input signals, displaying the images of retrieved signa ls. If no signal is found, it returns to the signal that was selected before the search was initialized. NOTE: • May not function properly with some input signals. • The signal searching function takes about 10 se[...]

21 ViewSonic PJ510 Multifunctional Settings Using The Menu Functions This projector has the following menus: MAIN, PICTURE-1, PICTURE-2, INPUT , AUTO, SCREEN and OP TION. Each of these menus is operated using the same methods. The basic operations of these menus are as follows. 1 Press the MENU button. The menu display appears on the screen. 2 Use [...]

ViewSonic PJ510 22 MAIN Menu W ith the MAIN menu, the items shown in the T able below can be performed. Perform each operation in accordance with the instructions in the table below . Item Description KEYSTONE Adjust the Keyston e (V ertical) Distortion: Upper in the data ( S ) ↔ ( T ) Lower in the data • The adjustable range of this function w[...]

23 ViewSonic PJ510 PICTURE-1 Menu W ith the PICTURE-1 menu, the items shown in the T able below can be performed. Perform each operation in accord ance with the instructions in the table below . Item Description GAMMA Select a Gamma Mode: NORMAL( S ) Q ( T )CINEMA( S ) Q ( T )DYNAMIC( S ) Q ( T ) CUSTOM • Selecting the CUSTOM and then pressing th[...]

ViewSonic PJ510 24 PICTURE-1 Menu (Continued) PICTURE-2 Menu W ith the PICTURE-2 menu, the items shown in the T able below can be performed. Perform each operation in accor dance with the instructions in the table below . Item Description MY MEMOR Y Load/Save a Setting: Selecting one from th e following and then pressing the ( X ) or the EN TER but[...]

25 ViewSonic PJ510 INPUT Menu W ith the INPUT menu, the items shown in the T able below can be performed. Perform e ach ope ration in accordance with the instructions in the table below . Item Description COLOR SP ACE Select a Color Sp ace Mode: AUTO( S ) Q ( T )RGB( S ) Q ( T )SMP TE240( S ) Q ( T )REC709( S ) Q ( T )REC601 • This item can be se[...]

ViewSonic PJ510 26 INPUT Menu(Continued) Item Description VIDEO NR Select a Noise Reduction Mode: HIGH ( S ) Q ( T ) MIDDLE ( S ) Q ( T ) LOW • This function performs only at a VIDEO input or a S-VIDEO input. At a VIDE O inpu t of NTSC 3.58, this function performs only when the TURN OFF is selecte d under the 3D-YCS. • When the HIGH, the MIDDLE[...]

27 ViewSonic PJ510 AUT O Menu W ith the AUTO menu, the items shown in the T able below can be performed. Perform each operation in accordance with the instructions in the table below . Item Description ADJUST Automatically Ad just the Picture: Pressing the ( X ) or the ENTER button performs this function At a RGB input : • V POSITION, H POSITION,[...]

ViewSonic PJ510 28 SCREEN Menu W ith the SCREEN menu, the items s hown in the T able below can be performed. Perform each operation in accord ance with the instructions in the table below . Item Description BLANK Select a Blank Screen Color: BLUE ( S ) Q ( T ) WHITE ( S ) Q ( T ) BLACK • The blank screen of selected color is displayed by pressing[...]

29 ViewSonic PJ510 OPTION Menu W ith the OP TION menu, the items shown in the T able below can be performed. Perform each operation in accordance with the instructions in the table below . Item Description VOLUME Adjust the V olume: High ( S ) Q ( T ) Low SCREEN TYPE Select the Screen T ype: 4:3( S ) Q ( T )16:9-TOP( S ) Q ( T )16:9-CENTER( S ) Q ([...]

ViewSonic PJ510 30 Lamp HIGH V OL T AGE HIGH TEMPERA TURE HIGH PRESSURE WA R N I N G The projector uses a high-pressure mercury glass lamp made of glass. The lamp can br eak with a loud bang, or burn out , if jolted or scratched, handled while hot, or worn over time . Note that each lamp has a different lifetime, and some may burst or burn out soon[...]

31 ViewSonic PJ510 Replacing The Lamp If the indicators or a message prompts you to replace the lamp, replace the lamp as s oon as possible. Using the lamp for long periods of time, or past the replacement date , co uld c aus e i t to bur st. If t he projector is mounted on the ceiling, or if the lamp has broken, do not try to clean the projector o[...]

ViewSonic PJ510 32 Air Filter Caring For The Air Filter The air filter should be cleaned about every 100 hours. If the indicat ors or a message prompts you to clean the air filter , clean the air fi lter as soon as possible. If the air filter becomes clogged by dust or the like, internal temperature rises and could cause malfunction. 1 T urn of f t[...]

33 ViewSonic PJ510 Replacing The Air Filter If the soiling will not come off the air filter , or it becomes damaged, then it needs to be replaced. Please replace the air filter as soon as possible. 1 T urn of f the projector , and unplug the power cord. 2 Contact your local dealer to prep are a new air filter . T ell the dealer your air fi lter typ[...]

ViewSonic PJ510 34 Other Care Caring For The Inside Of The Projector In order to ensure the safe use of your projector , please have it cleaned and inspected by your local dealer about once every 2 years. Never try to care for the inside of the unit yourself. Doing so is dangerous. Caring For The Lens 1 T urn of f the projector , and unplug the pow[...]

35 ViewSonic PJ510 T r oubleshooting Related Messages When the unit's power is ON, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below . If the same message is displayed after the treatment, or if a message ot her than the following a ppears, please contact yo[...]

ViewSonic PJ510 36 1 T urn of f the projector , and unplug the power cord. 2 After making sure that th e projector has cooled adequately , remove the filter cover . Hold the release buttons of the filte r cover , while pulling it up. 3 W ipe the transparent area of the filter cover by using a swab or a soft cloth. 4 Remove the air filter . Hold the[...]

37 ViewSonic PJ510 Regarding The Indicator Lamp s Lighting and flashing of the POWER indicator , the LAMP indicator , and the TEMP indicator have the meanings as described in the T able below . Pl ease respond in accordance with the instructions within the T able. If the same indi cation is displayed after the treatment, or if an indication other t[...]

ViewSonic PJ510 38 POWER indicator LAMP indicator TEMP indi- cator Description Lighting or blanking in red Tu r n e d o ff Blinking in red The cooling fan is not operating. T urn the power OFF and wait at least 20 minutes. After the unit has s ufficiently cooled down , please ma ke confirmation of the following item, and then resent the power to ON[...]

39 ViewSonic PJ510 Phenomena That May Easily Be Mist aken For Machine Defect s NOTE : Although bright spots or dark spots may appear on the screen, this is a unique character istic of liquid crystal displays, and such do not cons titute or imply a machine defect. Before requesting repair , please check in accordance with the following chart. If the[...]

ViewSonic PJ510 40 W arranty And Af ter-Service If a problem occurs with the equipment, first refe r to the “T roubleshooting” section of this manual, and run through the suggested checks. If this does not resolve the problem contact your dealer or service company . They will tell you what warranty condition is applied. Phenomenon Cases not inv[...]

41 Vi ewSo nic PJ 510 Specifications NOTE : : : : This specifications are subject to change without notice. (unit: mm) Item Specification Produc t name Liquid c rystal projector Liquid c rys- tal panel Panel si ze 1.4 cm (0 .55 type) Drive system T FT active matrix Pixels 480, 000 pi xels ( 800 horiz ontal x 600 ve rtical) Lens Zoom len s F=1.6 ~ 1[...]

ViewSonic PJ510 42 Customer Support For technical support or product se rvice, please contact V iewSonic. NOTE: Y ou will need the product serial number . Country/Region Web site T = T elephone F = F AX Email United S tates viewsonic.com/support T: (800) 688-6688 F: (909) 468-1202 service.us@viewsonic.co m Canada viewsonic.com/support T: (800) 688-[...]

43 ViewSonic PJ510 LIMITED W ARRANTY VIEWSONIC PROJECTOR What the warranty co vers: ViewSonic ® warrants it s products to be free from defects in material and workmanship du ring the warranty period. If a product proves to be defective in materi al or workmanship during the wa rranty period, ViewSonic will a t its sole option repair or replace the[...]

ViewSonic PJ510 44 Appendix Power Cord Safety Guidelines Caution: Use a power cable th at is properly grounded. Always use an AC power co rd that meets your country’s safety st andard. AC PLUG CORD PRECAUTION S FOR THE UNITED KINGDOM FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULL Y . IF THE FITTED MOULDED PLUG IS UNSUIT ABL E FOR THE SOC[...]

45 ViewSonic PJ510 Compliance Information for U.S.A. This equipment has been tested and found to comply wit h the limits for a Class B digit al device, pursuant to part 15 of the FC C Rules. Thes e limits are design ed to provide reasonable protection ag ainst harmful interference in a resident ial inst allation. This equipment generates , uses , a[...]

V iewSonic Corporation[...]