Vita Spa xStreamPro Bedienungsanleitung

DM INDUSTRIES, LTD. 2320 N.W . 147th Street Miami, Florida 33054 www .dmindustries.com health and relaxation for life IMPORTANT SAFETY INSTRUCTIONS READ ENTIRE MANUAL BEFORE INSTALLING SPA. PLEASE SAVE THIS MANUAL OWNER’S MANUAL for models xStr eam • xStr eamP r o • xStr eamDuoPr o[...]

09D12345BTZ P817G2DC1 17ACB 09D12345BTZ P817G2DC1 17ACB L I S T E D C US CONFORMS TO ANSI/UL STD 1563 CERTIFIED T O CAN/CSA C22.2 STD NO.218.1 DM Industries, L TD. 2350 N.W . 147 Street Miami, FL 33021 (305) 685-5739 www.dmindustries.com Serial Number Model Number ID PL ATES ARE L OCATED IN THE FRONT OF THE SP A . A SMALL ID T A G IS FOUND IN THE B[...]

OWNER’S RECORD D ATE PUR CHASED: ________________________________________ D ATE INST ALLED: _________________________________________ DEALER : __________________________________________________ ADDRESS: ________________________________________________ ___________________________________________________________ TELEPHONE: _________________________[...]

[...]

GENERAL INFORMATION • Important Safety Instructions . . . . . . . . . . . . . . 1 • Manufactur er’s Do’s and Don’ts . . . . . . . . . . . . 2 SET UP AND INSTALLATION • Set Up and Installation Instructions. . . . . . . . . . 2 • W arning Label Installation . . . . . . . . . . . . . . . . . 3 • Cover installation . . . . . . . . . . .[...]

[...]

PAGE 1 IMPORTANT SAFETY INSTRUCTIONS WHEN INST ALLING AND USING THIS ELECTRICAL EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD AL W AYS BE FOLLOWED, INCL UDING THE FOLL OWING D ANGERS: 1. WARNING - T o reduce the risk of injury . Do not permit children to use this pr oduct unless they are closely supervised at all times. 2. DANGER - Risk of Accidental [...]

WARNING: The use of alcohol, drugs, or medication can greatly increase the risk of fatal HYPERTHERMIA. PAGE 2 R eading and understanding these warnings will allow you to r educe the risk of causing inadvertent damage to your spa, your surroundings, or yourself . Read these war nings carefully . DO Mak e sure the spa is connected to a Gr ound F ault[...]

PAGE 3 INST ALLING THE SP A COVER 1. P osition the cover squarely over the spa. 2. P osition the locks for the tie-downs on the sides of the spa. Y ou should allow appro ximately 13mm to 20mm (1/2” to 3/4”) slack in the straps for ease of insertion into the locks and to allow for material shrinkage during temperatur e changes. 3. Using the scre[...]

817G2 817G1 817G3 (2 ea) 0212318 (2 ea) 0532064 Cascade Cover Plate 0663005 (1 ea) 0212305- TRB (2 ea) 0532064 (1 ea) 0212318 (2 ea) 0212318 DRAIN DRAIN DRAIN DRAIN PAGE 4 NO DIVING TILES[...]

NOTE: FOR BEST RESULTS, READ EACH STE P CAREFU LLY AND ENTIRELY BEFORE PROCEEDING TO THE NEXT. FILLING YOUR SPA Wipe the interior of the spa with a damp, soft cloth to remove any residue that may be on the surface. Fill with a garden hose by inserting the nozzl e of the hose in the filter in let (After fi lling is comp lete, remembe r to put the fi[...]

xStream Duo Pro only THERAPY OPERATIN G INSTRUCTIONS The xStream Duo Pro spa has been designed for your maximum enjoyment and comfort, with two totally independent areas, one for swi mming exercises and one for therapy. It has also been engi neered for energy effici ency. The two areas run independently by two separa te ICS TM electronic control ce[...]

3s TO START SELF TEST TO CANCEL SELF TEST continues on next p a g e Turns filtration On/Off on shown hour. 12: - Off 12: F Filtering Cycles up through filtration hours USE ARROWS TO CHANGE BETWEEN MODES FACTORY DEFAULTS 12: - AM 12: - PM 1: - 1: - 2: - 2: - 3: - 3: - 4: - 4: F 5: - 5: F 6: - 6: - 7: - 7: - 8: F 8: - 9: F 9: - 10: - 10: - 11: - 11: [...]

TO CHANGE TO INDIVIDUAL DAYS OF THE WEEK: 7 – Saturday 6 – Friday 5 – Thursday 4 – Wednesday 3 – Tuesday 2 – Monday 1 – Sunday continues on next p a g e USE ARROWS TO CHANGE TEMPERATURE USE ARROWS TO CHANGE ºF to ºC 12/24 HOUR MINUTES MONTH DAY YEAR GOES BACK TO THE BEGINNING USE ARROWS TO CHAN GE THERAPY PRO GRAMMING INSTRU CTIONS [...]

8s GOES BACK TO THE BEGINNING OF THE ADVANCED SET TINGS THERAPY ADVANCED P ROGRAMMING INSTRUCTIONS DO NOT ENTER THI S SECTION UNLESS IN STRUCTED BY A QUALIFIED TE CHNICIAN * * IMPROPER CHANGES MAY CAUSE MALFUNCTION OR DA MAGE YOUR SPA AND MAY VOID THE WARRANTY! * * ADVANCED FEATURES SETUP To exit programming mode, press , or at any point in the seq[...]

SWIM OPERATING IN STRUCTIONS The xStream Series spas have been designed for your maximum enjoyment and comfort. They have been engineered for energy effi ciency, and the ICS TM electr onic contr ol center a llows full pr ogramming of temperature and filtration cycles. With the ICS TM electronic control center you may pr ogram different temperatures[...]

SWIM OPERATING IN STRUCTIONS SETTING TEMPERATURE FOR A DAY. Press this button to display water temperature. Press these buttons to select the desired temperature. NOTE: For full instructions on programming your ICS TM controller, go to the SWIM PROGRAMING INSTRUCTION section on page 13. IMPORTANT: When your spa is activated or temperature is adjust[...]

SWIM OPERATING IN STRUCTIONS TURNING ON THE LIGHT Standard Light: Press to turn light on and off. LED Light : Press once to turn underwater lights on. Pressing a second time will turn on Aquabrite/ Chromatherapy, if so equi pped. Pressing a third time will turn lights off. For color/intensity programming, refer to Aquabrite /Chromathera py instruct[...]

TO CHANGE TO INDIVIDUAL DAYS OF THE WEEK: 7 – Saturday 6 – Friday 5 – Thursday 4 – Wednesday 3 – Tuesday 2 – Monday 1 – Sunday continues on next p a g e USE ARROWS TO CHANGE TEMPERATURE 3s USE ARROWS TO CHANGE ºF to ºC USE ARROWS TO CHANGE * * If the display shows AH or ECO instead of hd=A, the swim cont roller is programmed incorre[...]

12/24 HOUR MINUTES MONTH DAY YEAR continues on next p a g e GOES BACK TO THE BEGINNING USE ARROWS TO CHANGE ± TO LOCK ² TO UNLOCK ± TO LOCK ² TO UNLOCK SWIM PROGRAMMING INSTRUCTIONS E. CLOCK AND CALENDAR SETTING ...................................... The display will sequenc e through the time and calender setti ngs as is pressed. Sequence is: [...]

8s xStream xStream Pro xStream Duo Pro GOES BACK TO THE BEGINNING OF THE ADVANCED SET TINGS USE ARROWS TO CHANGE VALUE SWIM ADVANCED PROGRAMMING I NSTRUCTIONS DO NOT ENTER THI S SECTION UNLESS IN STRUCTED BY A QUALIFIED TE CHNICIAN * * IMPROPER CHANGES MAY CAUSE MALFUNCTION OR DA MAGE YOUR SPA AND MAY VOID THE WARRANTY! * * ADVANCED FEATURES SETUP [...]

PAGE 16 Y our xStr eam Swim Spa’s therapy section is designed with a unique jet system to allow you to select a wide variety of massage patterns. The following is a description o f the various types of jets and their operation you may use to tailor your spa to your specific massage needs. A) EURO CLUSTER MASSAGE JET These jets are used for back, [...]

PAGE 17 SAFETY FEATURES A. FREEZE PROTECTION If the temperature in the spa plumbing falls below 10°C (50°F), the water pump will turn on low speed and run for 30 seconds. Af ter 30 seconds, if the water is still at 10°C (50°F), the heater will turn on and raise the temperatur e 2°C (10 °F). The top side control will display the message "[...]

FILTER MAINTENANCE Y our Spa is designed with the most efficient top loading filtration system in the industry . F ilter maintenance is the most critical fac- tor in k eeping your spa water clean. TO CLEAN THE FILTER (NOTE: NEVER RUN THE SP A WITHOUT A FIL TER INST ALLED) R emove the skimmer bask et and the cartridge. Spray it with a garden hose. I[...]

PAGE 19 WINTERIZING YOUR SPA Most Hot T ub enthusiasts will agree that there is no bet- ter time to enjoy their spa then in colder winter months. Although your Spa has been designed and engineered for year -round use in any climate, if you chose to leave it empty in the winter time, there ar e precautions you should tak e. 1. Make sur e that all po[...]

SYMPTOM Spa Inoperative MESSAGE FL O HILI ICE LS SS CP REL HC P1/P2/P3 F1/F2/F3/F4 BUS PAGE 20 DIAGNOSTIC & TROUBLESHOOTING Resetting Your Spa Lik e your PC at home, your spa electronics could get cor rupted by electrical surges and operate impr operly . If your spa system is not operating properly or shows any of the following messages, please[...]

3s 8s USE ARROW KEYS TO CHANGE VALUE UP OR DOWN Rev. Date: 10/17/200 8 Self Test (2 min.) If display does not show AH or ECO, call a service tech . FACTORY DEFAULT SETTINGS DOMESTIC EXPORT To exit Pro g rammin g mode p ress Jet, Li g ht or Aux button, or wait 10 seconds . *** IMPROPER CHANGES MAY CAUSE MALFUNCTION AND DAMAGE YOUR SPA! *** or to to [...]

3s 8s Self Test Function not applicable to Swim Packs. xStream Pro xStream Duo Pro xStream Setup Menu - ADVANCED SETTINGS DISCLAIMER: DO NOT ENTER THIS SECTION UNLESS INSTRUCTED BY A QUALIFIED TECHNICIAN. DOM EXP FACTORY DEFAULT SETTINGS *** IMPROPER CHANGES MAY CAUSE MALFUNCTION AND DAMAGE YOUR SPA! *** Switches Pump settings: EXP ² Unlocked ² U[...]

[...]

© 2009 DM INDUSTRIES • ALL RIGHTS RESER VED • SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE DM Industries, Ltd., 2320 Northwest 147th Street, Miami, Florida 33054 Email: customercar e@dmindustries.com and techhelp@dmindustries.com www .dmindustries.com MIAMI FL ORIDA DM P art Number 0463502-8170509 F ile: xStream_Own_Man_0905a.pdf[...]