Wacom DTZ-2100D Bedienungsanleitung

Installation Guide & Har d ware Manual f or Cintiq 21UX (DTZ-2100D) Cintiq21UX_Manual.fm Page -1 Monday, November 5, 2007 10:27 AM[...]

W acom Cintiq ® 21UX Installation Guide & Hardware Manual f or Cintiq 21UX (DTZ-2100D) English version 2.2, No vember 05, 2007 Cop yright  W acom Co ., Ltd., 2007 All rights reser ved. No par t of this manual ma y be reproduced e xcept for y our e xpress personal use. W acom reser v es the right to revise this pub lication without obligatio[...]

Introduction and overview Page 1 INTRODUCTION AND OVERVIEW The W acom ® Cintiq ® 21UX pen displa y combines the benefits of a Liquid Cr ystal Displa y (LCD) with the control, comf or t, and productivity of W acom’ s cordless, batter y-free pen technology . This gives y ou a direct pen-on-screen interf ace for y our computer . Cintiq’ s basic[...]

Precautions on use and handling Page 2 PRECAUTIONS ON USE AND HANDLING T o ensure the saf e usage of your product, be sure to f ollow all instructions, cautions, and warnings f ound within this manual. F ailure to do so could cause the loss of data or damage to your computer . F ailure to do so could also v oid your w arranty , in which case W acom[...]

Precautions on use and handling Page 3 USAGE HANDLING W ARNING Only use the po wer adapter that came with Cintiq. If a diff erent type of power adapter is used, Cintiq will not work properly or may be damaged. Using a different type of power adapter also has the potential to result in fire. Use of a diff erent power adapter will v oid your w arran[...]

Precautions on use and handling Page 4 W ARNING – LAMP(S) INSIDE THIS PRODUCT CONT AIN MERCUR Y AND MUST BE RECYCLED OR DISPOSED OF A CCORDING T O LOCAL, ST A TE OR FEDERAL LA WS. The Cintiq pen display has a bac klight which contains mer cury (Hg). Be sure to dispose of properly , and to manage any disposal of this unit in accordance with your l[...]

Precautions on use and handling Page 5 Reuse, recycling and reco very . Y ou are urged to recycle this product when replacing it with a new er product or when it has outlived its useful lif e by bringing it to an appropriate collection point f or recyclable materials in your community or region. By doing this, y ou can help improv e the environment[...]

Contents Page 6 CONTENTS Introduction and o verview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Precautions on use and handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Ph ysical location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Env[...]

Contents Page 7 T roubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 T esting Cintiq . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 T esting controls and input tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 T [...]

Unpacking your Cintiq Page 8 UNPACKING YOUR CINTIQ P AC KAGE CONTENTS Y ou will find the product par ts and accessories packed together in the accessories bo x. T o av oid damaging y our product, please review the instructions on the f ollowing pages bef ore setting up or using Cintiq or the Cintiq stand. Y our product came with the f ollowing ite[...]

Unpacking your Cintiq Page 9 SETTING UP THE CINTIQ STAND Place the stand on your desktop or w ork surface, making sure the stand is stab le and will not tip or f all when the pen displa y is mounted on it. Then familiarize y ourself with the stand components. Next step: Unpack the pen displa y and mount it on the Cintiq stand. See page 10. Rear fee[...]

Unpacking your Cintiq Page 10 UNPAC KING AND MOUNTING THE CINTIQ PEN DISPLAY Remov e any pac king materials from the back of the displa y unit and cabling. T o mount Cintiq on the stand: • Make sure the stand is stab le on your desktop or other w ork surface and will not tip or f all when Cintiq is mounted on it. Securely grasp Cintiq with both h[...]

Unpacking your Cintiq Page 11 ADJUSTING THE DISPLAY INC LINE T o adjust the displa y incline, f ace the front of the Cintiq pen displa y and gr asp it on the left and right side at appro ximately the same height as the Cintiq stand adjustment lev ers . Use your finger tips to gently pull the incline adjustment le vers to ward the displa y unit; th[...]

Unpacking your Cintiq Page 12 ADJUSTING ROTATION The pen displa y can be rotated on the display stand when the incline is less than or equal to 25 degrees . T o adjust rotation, gr asp Cintiq by the main body and rotate the unit to the desired position; it will mov e on the bearing hub . Y ou can only rotate the display unit 180 deg rees in either [...]

Unpacking your Cintiq Page 13 REMOVING CINTIQ FR OM THE DISPLA Y STAND T o remo ve Cintiq from the displa y stand: • If the rotation lock scre ws are attached, remov e them from the bac k of Cintiq. • P osition the pen displa y to landscape orientation before remo ving it from the displa y stand. The stand will not release unless Cintiq is in l[...]

Cintiq pen display components Page 14 CINTIQ PEN DISPLAY COMPONENTS After the Cintiq pen displa y is safely mounted on the Cintiq stand, tak e some time to f amiliarize yourself with its f eatures and components. The displa y and tablet sensor function as an integr ated output and input de vice. The displa y suppor ts resolutions up to 1600 x 1200 [...]

Cintiq pen display components Page 15 REAR VIEW Next step: Installation . See page 16. Integrated pen holder and alternate cable exit The pen can be stored here. If you are not using the Cintiq stand supplied with the unit, you can route the cab le to e xit from this location. See Using an alter nate mount or stand on page 57. Digital/Analog (D VI/[...]

Installation Page 16 INSTALLATION SYSTEM REQUIREMENTS Bef ore installing Cintiq, make sure y our computer meets the f ollowing minimum system requirements: • PC. Windo ws Vista ™ , Vista x64, XP , XP x64, or 2000. D VI or V GA video connector , a vailab le USB por t, and CD-ROM driv e. • Macintosh. OS X, v10.3.9 or greater . D VI or V GA vide[...]

Installation Page 17 STEP 1: DISPLAY INSTALLATION In this step , Cintiq is installed as a displa y on your system. Important: Do not connect the USB data cable until instructed to do so . • T urn off your computer . Caution: Ne v er connect or disconnect the video or power cab les while y our computer or Cintiq are pow ered on – this can damage[...]

Installation Page 18 • Connect the pow er adapter to Cintiq. See – C – on the ne xt page . • Then connect the adapter’ s po wer cable and plug the adapter into an A C outlet. See – D – • T urn on Cintiq. The power LED will light orange . If connecting to an Apple ADC or mini-V GA connection, you will need to obtain an appropriate ad[...]

Installation Page 19 DISPLAY CAB LING DIAGRAM Cintiq, rear view – B – Video card D VI or V GA Rear panel of your computer Do not attach the USB data cable until instructed to do so . P ow er adapter – C – DC I N put T o AC outlet D VI-I connector T o connect to a D VI-D connector , use the D VI-D to D VI-I adapter . T o connect to a V GA co[...]

Installation Page 20 • Ne xt, tur n on y our computer . F or Windows systems , Cintiq will automatically install as a default displa y . If you want Cintiq to be identified as a Cintiq displa y and if you w ant to install the color calibration profile f or Cintiq, f ollow the instructions below to update the displa y driver f or Cintiq: 1. Open[...]

Installation Page 21 F or Macintosh systems, a Cintiq color profile will be added to y our computer’ s color management system during the tablet software driv er installation process. T o activate this color profile f or use with Cintiq, you ma y need to select the Cintiq 21UX profile in the system’ s ColorSync Utility control panel. For mor[...]

Installation Page 22 STEP 2: PEN TABLET INSTALLATION USB CABLE INSTALLATION Plug the USB connector into an av ailab le USB por t on your computer or into a USB hub attached to your computer . See – E – in the connection diagram below . Ne xt, mov e on to the pen tablet Softw are installation on page 23. P EN TABLET USB CABLING DIA GRAM Y our co[...]

Installation Page 23 SOFTWARE INSTALLATION IMPORT ANT : Y ou MUST install the W acom pen tablet driv er software f or correct pen-on-screen functionality . T o install the tab let software: • Sav e y our work and close all open applications. T emporar ily disab le any virus protection programs . • Inser t the W acom P en T ab let Dr iv er CD in[...]

Working with your Cintiq Page 24 WORKING WITH YOUR CINTIQ USING THE GRIP PEN As you w ork with Cintiq, you can rest your hand lightly on the displa y screen, just as if it were a dr awing board or sheet of paper . The pen is cordless , batter y-free, and senses the amount of tilt and pressure you e x er t upon it. Hold the Grip P en as you would a [...]

Working with your Cintiq Page 25 BASIC PEN OPERATIONS P ointing and selecting: Move the pen slightly abo v e the Cintiq display screen to position the screen cursor ; you do not need to touch the tablet surf ace to move the screen cursor . The cursor jumps to the location where y ou place the pen. Press the pen tip on the displa y screen to make a [...]

Working with your Cintiq Page 26 Using the side switc h: The pen is equipped with a DuoSwitch. This switch has two prog rammable functions that can be selected by roc king the s witch in either direction. Y ou can use the DuoSwitch whene ver the pen tip is within 5 mm (0.2 inch) of the tab let surf ace; y ou do not need to touch the pen tip to the [...]

Working with your Cintiq Page 27 T ABLET CONTR OLS T o speed up y our workflow in graphics or other applications , your Cintiq pen displa y features ExpressK eys and T ouch Strips. While using the pen with your dominant hand, y ou can simultaneously use your other hand to oper ate the ExpressK eys or T ouch Strip. ExpressKe ys Press the customizab[...]

Working with your Cintiq Page 28 USING EXPRESSKE YS As you w ork with your pen on the displa y tablet surf ace, press an ExpressK ey to toggle between tools or change tool proper ties. Y ou can work with the def ault settings, or choose from an y of the other av ailab le functions. The def ault settings were chosen to optimize y our workflow in Ph[...]

Working with your Cintiq Page 29 USING THE T OUCH STRIPS Slide your finger o ver the T ouch Strip to quickly z oom in or out, scroll up or down, or perf orm other functions with your secondary hand while using your primar y hand to work with the Grip P en. Y ou can also set each T ouch Str ip to issue custom k eystrok es. F or example , you might [...]

Working with your Cintiq Page 30 SETTING UP Y OUR W ORK AREA The Cintiq 21UX pen displa y and stand were designed to provide y ou with the widest possible r ange of fle xibility and ergonomic work approach. The design allows you to quic kly adjust Cintiq to a diff erent position whene ver the need arises. Y ou may want to e xper iment with diff er[...]

Working with your Cintiq Page 31 Hints: • If the rotation lock scre ws are attached to the back of Cintiq, the y must be remo ved bef ore Cintiq can be rotated. • Bef ore rotating the display unit, be sure the cab le is freely rotating behind the unit. • Because the Cintiq dra wing surface will be a little higher than y our desk, consider adj[...]

Customizing Page 32 CUSTOMIZING After you master the basics of using y our Grip P en on the Cintiq pen displa y , you ma y want to customize the w ay the pen or pen displa y wor ks . The W acom T ablet control panel mak es it easy to customize Cintiq and the pen. OPENING THE CONTR OL PANEL T o open the control panel, use the Cintiq pen on the pen d[...]

Customizing Page 33 CUSTOMIZATION BASICS This manual only co vers the basics of customizing Cintiq. F or detailed information see the Cintiq Software User’ s Manual. Open the W acom T ablet control panel to customiz e your product. When you open the control panel, an icon f or the Grip P en is display ed in the T OOL list and the appropriate tabs[...]

Customizing Page 34 CALIBRATING CINTIQ Y ou must calibrate the pen displa y tab let in order to align the screen cursor with the position of the pen on the displa y screen. This is required to adjust for par allax caused by the displa y screen cov er glass and coating. Set Cintiq in its working position, then follow the procedure belo w . Important[...]

Customizing Page 35 ADJUSTING THE DISPLA Y FACTORY PRESETS, AUTO-SYNC, AND USER SETTINGS Factory presets: For optimal displa y quality , set your video card to Cintiq’ s native resolution of 1600 x 1200 pix els (UXGA). See page 63 for signal specifications. A uto-sync: The auto-sync function automatically sets the hor izontal and v er tical scre[...]

Customizing Page 36 The basic process f or working with the OSD is as follo ws: • Press the M ENU button to open the OSD main menu. • Press the up or down buttons to toggle betw een the main menu icons . Then press the S ELECT button to choose the highlighted icon. The Main Control icon displa ys a D VI or V GA identifier , depending on which [...]

Customizing Page 37 When you open the On Screen Displa y , the main menu icons are displa y ed. Language. Allows y ou to choose the language in which the OSD menu will be displa yed. D ISPLAY menu options are as f ollows: •B RIGHTNESS . Increases or decreases the image brightness. •C ONTRAST . Increases or decreases image contrast. Note that ch[...]

Customizing Page 38 C OLOR menu options are as f ollows: •T EMPERATURE . Enables y ou to adjust the pen display color temperature. Provides color temperature settings f or 6500˚ and 9300˚ K elvin, as well ad D IRECT and C USTOM options. •D IRECT displa ys the colors directly from the video card without any adjustment. •R ED , G REEN , B LUE[...]

Customizing Page 39 ADJUSTING CLOC K AND PHASE (V GA ONLY) Some computers and video cards ma y not allow the auto-sync function to fully work when Cintiq is first connected. If some por tion of text appears b lurred, press the A UTO b utton to automatically synchronize to the incoming signal (ref er to the description about auto-sync on page 35). [...]

Customizing Page 40 P O WER SAVING Cintiq conf or ms to VESA and ENERGY ST AR ® power sa ving guidelines. When using Cintiq with a Displa y P ow er Management Signaling (DPMS) compliant computer or video card, the displa y will automatically comply with the below pow er saving par ameters. When these pow er-saving functions are in eff ect, the scr[...]

Troubleshooting Page 41 TROUBLESHOOTING Most of the time your pen displa y tab let will work flawlessly . But if you are ha ving trouble , W acom recommends you do the f ollo wing: 1. If the W acom tab let driver f ailed to load properly , first perf or m the recommended action in an y error message that ma y appear on your screen. If that does n[...]

Troubleshooting Page 42 3. V erify that the tablet and Grip P en are working: • Press the Grip P en tip against the displa y and verify that the status LED lights blue . • If the LED does not light, v er ify that Cintiq’ s USB cable is plugged into an activ e USB por t. If Cintiq is plugged into a USB hub , tr y plugging Cintiq directly into [...]

Troubleshooting Page 43 T ESTING CONTR OLS AND INPUT TOOLS If the Grip P en, or the Cintiq ExpressK eys or T ouch Strips do not work as you e xpect, it is a good idea to first check the assigned functions or reset them to their def ault conditions . A quick wa y to reset a pen to its def ault settings is to remov e it from the T OOL list by clic k[...]

Troubleshooting Page 44 T ESTING A PEN 1. While obser ving the P OINTING D EVICE I NFO column, bring your pen within 5 mm (0.2 inch) of the displa y screen. A value f or P ROXIMITY , the D EVICE N AME , D EVICE T YPE , and a D EVICE S/N (serial number) should be displa yed. If y ou hav e more than one Cintiq unit connected to your system, be sure t[...]

Troubleshooting Page 45 DISPLA Y TROUB LESHOOTING If you encounter prob lems with the Cintiq displa y , refer to the f ollo wing tables; your problem ma y be described here and you can try the solution offered. For additional inf ormation about color issues, ref er to the documentation that came with your oper ating system or applications. GENERAL [...]

Troubleshooting Page 46 V GA PROBLEMS Color quality is inaccurate. • Open the OSD menu, go to the R ESET men u, and select the F ACTORY R ESET option. • Be sure the Cintiq color profile has been installed and is selected as the profile f or use with your operating system and applications . • Any changes to the contrast setting should be mad[...]

Troubleshooting Page 47 P EN TABLET TR OUB LESHOOTING If you encounter prob lems with the Cintiq pen displa y , refer to the f ollo wing tables . Y our problem ma y be described here, and you can try the solution offered. Be sure you ref er to the Cintiq Read Me file for the latest inf or mation. F or additional information, visit W acom’ s web [...]

Troubleshooting Page 48 The eraser selects e verything or will not stop erasing. Open the W acom T ablet control panel and go to the E RASER tab . Mov e the E RASER F EEL slider tow ard F IRM , or select the D ETAILS ... button and increase the C LICK T HRESHOLD setting. If this does not help , see T esting Cintiq on page 41. Y ou notice a delay at[...]

Troubleshooting Page 49 The pen tip and screen cursor do not properly line up . Open the W acom T ablet control panel and select the C ALIBRATE tab . Continue with Calibrating Cintiq on page 34. The screen cursor mov es but it does not jump to the pen tip location when the pen is placed on the displa y screen, and it does not f ollow the pen tip wh[...]

Troubleshooting Page 50 WINDOWS-SPECIFIC PR OBLEMS Y ou suspect the pen tablet pref erences may be corrupted, or want to make cer tain that all settings are at their f actor y def aults. Delete the pen tablet pref erences as f ollows: Windows: Click the START icon and select A LL P ROGRAMS . Then select W ACOM T ABLET and T ABLET P REFERENCE F ILE [...]

Troubleshooting Page 51 MACINTOSH-SPECIFIC PROB LEMS At star tup , a dialog bo x appears telling you that either the driver f ailed to load or the tablet pref erences hav e not yet been created. The pen displa y tablet w as not detected at star tup . Check that the USB interf ace cable is securely connected to a USB por t on y our computer or to a [...]

Troubleshooting Page 52 T ECHNICAL SUPPORT OPTIONS If you ha v e a problem with y our Cintiq pen displa y , first check the Installation section in this guide to make sure the unit is installed correctly . Then re view the T roubleshooting procedures . If you cannot find the ans wer in this guide , you ma y find updated information about your pr[...]

Troubleshooting Page 53 OBTAINING DRIVER DOWNLOADS W acom periodically updates the pen tablet software driv er to maintain compatibility with new products . If you are ha ving a compatibility problem betw een your Cintiq pen displa y and a ne w hardware or software product, it ma y be helpful to download a ne w W acom tablet software driver (when a[...]

Appendix Page 54 APPENDIX CARING F OR CINTIQ K eep the Grip P en and your Cintiq LCD screen surf ace clean. Dust and dir t par ticles can stick to the pen and cause e xcessive w ear to the display screen surf ace. Regular cleaning will help to prolong the lif e of your LCD screen surf ace and pen. K eep Cintiq, the Cintiq stand, and the Grip P en i[...]

Appendix Page 55 REPLACING THE PEN TIP The pen tip (nib) will wear with normal use. Excessive pressure will cause the nib to wear sooner . A worn nib may damage the coating on the Cintiq displa y screen. T o av oid this, periodic tip replacement is recommended. When the nib gets too shor t or de velops a sharp edge, replace it with one of the e xtr[...]

Appendix Page 56 OPTIONAL DISPLA Y CONFIGURATIONS After mounting the pen displa y unit on the Cintiq stand, you can rotate the pen displa y tab let to a variety of positions. If you do not plan to rotate the Cintiq and w ant to f asten it more securely to the stand, you can install the rotation lock scre ws as shown belo w . T o lock Cintiq to the [...]

Appendix Page 57 USING AN ALTERNATE MOUNT OR STAND Cintiq can be attached to any mount arm or stand conf or ming to the VESA 100 standard. Mounting screws that are 4 mm wide with a 0.7 mm pitch (M4 Regular), with a screw clearance depth from 13 – 18 mm are required. T o attach Cintiq to a VESA 100 mounting platform: 1. T urn off your computer and[...]

Appendix Page 58 4. Ne xt remov e the f our attachment screws from the cab le cov er plate and lift the plate aw a y from the pen displa y unit. 5. Place the cable into the cab le e xit channel. Then reattach the cable co ver plate making sure to use the correct screws f or reattachment . (The cable co ver plate scre ws are shor ter than the bearin[...]

Appendix Page 59 6. T aking care not to dislodge the bearing stopper from the hub section, position the two halv es of the bearing hub together around the pen display tab let cable and o ver their attachment points . 7. Attach the bearing hub sections to the unit making sure to use the correct screws f or reattachment. (The bearing hub screws are l[...]

Appendix Page 60 P EN AND DIGITAL INK CAPABILITIES IN WINDO WS VISTA Microsoft Windows Vista provides e xtensiv e suppor t for pen and touch input. When using Cintiq with a computer running Windows Vista, your e xperience is enhanced by powerful note taking, handwriting recognition, f ast navigation, and other digital inking options designed to giv[...]

Appendix Page 61 ABOUT THE WINDOWS VISTA T ABLET PC INPUT P ANEL The Windows Vista T ablet PC Input P anel enab les you to use handwriting or an on-screen ke yboard to directly enter te xt with your Wacom pen. There are a number of w a ys to launch the Input P anel: • Click on the Input P anel icon which appears when you mov e the screen cursor i[...]

Appendix Page 62 UNINSTALLING CINTIQ F ollow the appropriate procedure below to remov e the Wacom tab let software and Cintiq pen displa y from your system. Important: When you remo ve the W acom tablet softw are from your system, y our W acom tablet will no longer operate with full tab let functionality but will continue to function as a mouse de [...]

Appendix Page 63 PR ODUCT SPECIFICATIONS GENERAL SPECIFICATIONS DISPLAY Ph ysical dimensions (W x D x H) 561 x 421 x 61.3 mm (22.10 x 16.59 x 2.41 in), e xcluding stand W eight 8.7 kg (19.1 lb), e xcluding stand 10.4 kg (22.9 lb), including stand Input voltage 12 VDC P ow er consumption 54 W or less (12 VDC) in normal operation mode 2 W or less (12[...]

Appendix Page 64 P EN TABLET DISPLAY STAND P O WER ADAPTER GRIP PEN (MODEL ZP-501E) Reading technology Electromagnetic resonance technology Active area 432.0 x 324.0 mm (17.0 x 12.75 in) Resolution 0.005 mm/point (5080 lpi) Accuracy ±0.5 mm (±0.02 in), av erage Tilt range (all pens) ±60 degrees Reading height 5 mm (0.2 in) Maximum repor t rate 1[...]

Appendix Page 65 ACCESSORIES Airbrush. A true digital airbrush incor porating a pressure-sensitive tip and eraser , tilt sensitivity , and a fingerwheel that provides an additional degree of control ov er the application of digital paint. This tool also includes a programmab le side s witch. ZP-400E 6D Ar t P en. This pen provides rotation sensing[...]

Appendix Page 66 OR DERING PAR TS AND ACCESSORIES T o purchase par ts and accessories, ref er to the Cintiq Read Me file and see who to call f or your region. Y ou can also do the follo wing: • T o purc hase parts and accessories in the USA or Canada, call 1.888.884.1870 (toll-free) or visit W acom’ s web site at http://www .W acomDirect.com ([...]

Appendix Page 67 RADIO AND TELEVISION INTERF ERENCE The equipment described in this manual generates, uses , and can radiate radio-frequency energy . If it is not installed and used properly – that is, in strict accordance with W acom instr uctions – it ma y cause interf erence with radio and tele vision reception. FEDERAL COMMUNICATIONS COMMIS[...]

Appendix Page 68 INDUSTRY CANADA (CANADA ONLY) Industry Canada, Class B “This Class (B) digital apparatus complies with Canadian ICES-003” “Cet appareil numerique de la classe (B) est conforme a la norme NMB-003 du Canada. ” CE DECLARATION The Cintiq 21UX pen displa y has been tested and found to comply with the f ollowing harmonized Europe[...]

Appendix Page 69 W ARRANTY (W ORLDWIDE, EXCEPT F OR EUR OPE, AFRICA AND MIDDLE EAST) LIMITED W ARRANTY W acom warrants the product, to the original consumer purchaser , except f or the Software and consumab le items such as the pen nibs, to be free from def ects in materials and workmanship under nor mal use and service for a period of two (2) year[...]

Appendix Page 70 W ARRANTY SERVICE IN THE U .S.A. AND CANADA T o obtain W arranty service within the U.S . or Canada contact: W acom T echnical Suppor t Phone: 1.360.896.9833 F ax: 1.360.896.9724 Inquir y f orm: http://www .wacom.com/productsupport/email.cfm E-mail: suppor t@w acom.com W ARRANTY SERVICE OUTSIDE OF THE U .S.A. AND CANADA F or produc[...]

Appendix Page 71 This page intentionally left blank. Cintiq21UX_Manual.fm Page 71 Monday, November 5, 2007 10:27 AM[...]

Appendix Page 72 This page intentionally left blank. Cintiq21UX_Manual.fm Page 72 Monday, November 5, 2007 10:27 AM[...]

W acom T echnology Corporation Wacom Eur ope GmbH 1311 SE Cardinal Cour t Europark Fichtenhain A9 V ancouver , W A 98683 47807 Kref eld U .S.A. Germany T elephone T elephone General: +1.360.896.9833 General: +49.(0)2151.3614.0 F ax: +1.360.896.9724 F ax: +49.(0)2151.3614.111 W acom Co., Ltd. W acom Co., Ltd. 2-510-1 T o yonodai Asia P acific Offi[...]

Installation Guide & Hard ware Manual for Cintiq 21UX (DTZ-2100D) W acom Co ., Ltd. UE-0308 (E) Cintiq21UX_Manual.fm Page 74 Monday, November 5, 2007 10:27 AM[...]