Whirlpool RF377PXX Bedienungsanleitung

ashen Clolbes Dryers Freezers Relrlgeralor-Freezers Ice Makers Lushwashers BUIII In Ovens and Sudace Umls. Ranges. Microwave Ovens Trash Compacll[...]

Contents Page BEFORE YOU USE YOUR RANGE 2 IMPORTANT SAFETY INSTRUCTIONS. . 3 PARTS AND FEATURES. 5 USING YOUR RANGE. 6 Using the Surface Units. 6 Setting the Clock 8 Using the Minute Timer. . 8 Using the Oven Controls 9 Baking.. . . . . . . 9 Adjusting the Oven Temperature Control 10 Broiling . . 11 Custom Broil . 11 Using the Automatic MEALTIMER?[...]

IMPORTANT SAFETY INSTRUCTIONS l Read all instructions before using the range. l Install or locate the range only in accordance with the provided Installation Instructions. It is recom- mended that the ran stalled by a qualifie 8 e be in- installer. The range must be properly con- nected to electrical supply and grounded. l To reduce the risk of tip[...]

l Do not heat unopened containers. They could explode. The hot contents could cause burns and container particles could cause injury. l Keep range vents unobstructed. l Always position oven racks in desired location while oven is cool. If rack must be moved while oven is hot, do not let potholder contact hot heating element in oven. l Do not clean [...]

Parts and features Model RF377PX.X UNIT MEALTIMI SURFACE AUTOMATIC OVEN OVEN OVEN !R’” RIGHT 5 LIGHT c* MARKER CLOCK/ TEMPERATURE SELECTOR FRONT 1.;’ I SWITCH CONTROL MINUTE TIMER CONTROL j ._’ I KNOB : ii LEFl LEFl FRONT REAR CONTROL CONTROL START HEATI,,&” -;$~,U REAR “StiRFACE R;GHT STOP KNOB INDICATOR KNOB INDICATOR TIME [...]

Using your range Using the Surface Units PUSH IN Control knobs must be pushed in before turning them to a setting. They can be set anywhere between HI and OFF. Surface Unit Markers The solid dot in the surface unit marker shows which surface unit is turned on by that knob. Surface Heating Indicator light The SURFACE HEATING Indicator Light on the c[...]

I Solid elements stay hot for a long time. Do not use the HI setting for long periods of time or leave pans on hot elements when cooking is done. Burned food and damage to the cookware could result. I Solid element surface units Before using a solid element surface unit for the first time, heat on HI setting for five minutes. The surface units will[...]

Setting the Clock Push in and turn the Minute Timer Knob to set the Clock. 1. Push in Minute Timer Knob and turn clockwise until clock shows the right time of day. 2. let the Minute Timer Knob pop out. Turn clockwise until Minute Timer hand points to OFF. The clock setting will change if you push in the knob when turning. Using the Minute Tier The [...]

Using the Oven Controls Baking 1. Position the rack(s) properly before turning on the oven. To change rack position, lift rack at front and pull out. The rack(s) should be placed so the top of the food will be centered in the oven. Always leave at least lY2 to 2 inches (4-5 cm) between the sides of the pan and the oven walls and other pans. For mor[...]

Adjusting the Oven Temperature Control Does your oven seem hotter or colder than your old oven? The temperature of your old oven may have shifted gradually without your noticing the change. Your new oven is properly adjusted to provide accurate temperatures. But when compared to your old oven, the new design may give you different results. If after[...]

Broiling . Position the rack before turning the oven on. See “Broil Chart” in the Cooking Guide or a reliable cookbook for recommended rack positions. 2. Put the broiler pan and food on the rack. i. Close the door to the Broil Stop position (open about 4 inches, 10.2 cm]. The door will stay open by itself. NOTE: The door must be partly open whe[...]

Using The Automatic MEALTIMER’” Clock The automatic MEALTIMER’” Clock is designed to turn the oven on and off at times you set, even when you are not around. Automatic baking is ideal for foods which do not require a preheated oven, such as meats and casseroles. Do not use the automatic cycle for cakes, cookies, etc...undercooking will resu[...]

To start baking now and stop automatically: 1. Position rack(s) properly and place food in the oven. 2. Make sure the clock is set to the right time of day. 3. Push in and turn the Stop Time Knob clockwise to the time you want the oven to shut off. Make sure the Start Time Knob is out. 4. Set the Oven Selector to TIMED BAKE. 5. Set the Oven Tempera[...]

The Storage Drawer The storage drawer is for storing pots and pans. The drawer can be removed to make it easier to clean under the range, and to check for installation of the anti-tip bracket. Use care when handling the drawer. Removing the Storage Drawer 1. Empty drawer of any pots and pans before removing drawer. Pull drawer straight out to the f[...]

Optional Door Panel Pat If you would like to change the color of your oven door glass to white or almond, you can order one of these kits: White (Kit No. 814069) or Almond (Kit No. 814070) from your Whirlpool Dealer, The kits include easy installation instructions. Caring for your range Control Panel and Knobs . Burn and Electrical Shock Hazard Mak[...]

Solid Element Surface Units Burn and Electrical Shock Hazard Solid element surface units do not glow red when hot. Make sure all controls are OFF and the range is COOL before cleaning. Failure to do so can result in burns or electrical shock. I 1. Turn off att surface units. I 3. IMPORTANT: Dry the element completely after cleaning. Turn on the ele[...]

Using the Self-Cleaning Cycle The Self-Cleaning cycle uses very high heat to burn away soil. Before you start, make sure you understand exactly how to use the Self-Cleaning cycle safely. Before You Start 1. Clean the areas shown by hand. They do not get hot enough dur- ing the Self-Cleaning cycle for soil to burn away. Use hot water and detergent o[...]

Setting the Controls Be sure the kitchen is ventilated during the Self-Cleaning cycle. This will help heat, odors and smoke to disappear from the room as quickly as possible. 1. Set the Oven Selector and Oven Temperature Control to CLEAN. 3. Push in and turn the Stop Time Knob clockwise 2 or 3 hours. l Use 2 hours for light soil. l Use 3 hours or m[...]

Special Tips l Keep the kitchen well ventilated during the Self-Cleaning cycle to help get rid of heat, odors and smoke. l Clean the oven before it gets heavily soiled. Cleaning a very soiled oven takes longer and results in more smoke than usual. l If the Self-Cleaning cycle doesn’t get the oven as clean as you expected, the cycle may not have b[...]

Cleaning Chart PART Exferlor surfaces WHAT TO USE HOW TO CLEAN Warm soapy water and l Wipe off regularly when oven is a sofl cloth. cool. Non-abrasive plastic l Do not allow food containing scrubbing pad for heavily- acids (such as vinegar, fOmaf0, soiled areas. lemon juice or milk) to remain on surface. Acids may remove the glossy finlsh. l Do not[...]

PART WHAT TO USE HOW TO CLEAN Oven door glass Spray glass cleaner or warm soapy water and a non-abrasive plastic scrubbing pad. l Make sure oven is cool. l Follow directions provided with the cleaner. . Wash. rinse and drv well. SelfGleanIng Oven For areas outside the Self-Cleaning area use warm soapy water or soapy steel wool pads. l Follow direct[...]

3. Remove the light bulb from its socket. Replace the bulb with a 40-watt appliance bulb. 4. Replace the bulb cover by screwing it in clockwise. Plug in appliance or reconnect at the main power supply. NOTE: The oven light will not work during the Self-Cleaning cycle. If you need service or assistance, we suggest you follow these steps: 1. Before c[...]

See the Cooking Guide for more infor- mation on cooking problems and how to solve them. 2. If you need assistance?.. Call Whirlpool COOL-LINE@ serv- ice assistance telephone number. Dial free from anywhere in the U.S.: 1-800-253-1301 and talk with one of our trained con- sultants The consultant can instruct you in how to obtain satisfactory oper- a[...]

WHIRLPOOL” RANGE PRODUCT I WARRANTY I EROOI I LENGTH OF WARRANTY WHIRLPOOL WILL PAY FOR FULL ONE-YEAR WARRANTY FSP@ replacement parts and repair labor to From Date of Purchase correct defects in materials or workmanship. Service must be provided by an authorized WhirlpoolSM service company. WHIRLPOOL WILL NOT PAY FOR A. Service calls to: 1. Corre[...]