Xerox 4230/MRP Bedienungsanleitung
- Schauen Sie die Anleitung online durch oderladen Sie diese herunter
- 274 Seiten
- 0.71 mb
Zur Seite of
Ähnliche Gebrauchsanleitungen
-
All in One Printer
Xerox DocuColor 242
96 Seiten 1.66 mb -
All in One Printer
Xerox 6110MFP
104 Seiten 7.58 mb -
All in One Printer
Xerox 90
99 Seiten 1.59 mb -
All in One Printer
Xerox 4260 Series
210 Seiten 1.38 mb -
All in One Printer
Xerox 9202
28 Seiten 3.37 mb -
All in One Printer
Xerox 8510MFP
292 Seiten 6 mb -
All in One Printer
Xerox M45
3 Seiten 0.06 mb -
All in One Printer
Xerox 5230
180 Seiten 4.59 mb
Richtige Gebrauchsanleitung
Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung Xerox 4230/MRP an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von Xerox 4230/MRP, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.
Was ist eine Gebrauchsanleitung?
Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung Xerox 4230/MRP die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.
Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung Xerox 4230/MRP. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.
Was sollte also eine ideale Gebrauchsanleitung beinhalten?
Die Gebrauchsanleitung Xerox 4230/MRP sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts Xerox 4230/MRP
- Den Namen des Produzenten und das Produktionsjahr des Geräts Xerox 4230/MRP
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts Xerox 4230/MRP
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen
Warum lesen wir keine Gebrauchsanleitungen?
Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von Xerox 4230/MRP zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von Xerox 4230/MRP und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service Xerox finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von Xerox 4230/MRP zu überspringen, wie es bei der Papierform passiert.
Warum sollte man Gebrauchsanleitungen lesen?
In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts Xerox 4230/MRP, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.
Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von Xerox 4230/MRP widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.
Inhaltsverzeichnis der Gebrauchsanleitungen
-
Seite 1
Xerox MRP Family 4215/MRP, 4219/MRP, 4220/MRP, 4230/MRP Coax Command Reference May 1995 720P12761[...]
-
Seite 2
Xerox Corporation 701 S. Aviation Boulevard El Segundo, CA 90245 © 1994 and 1995 by Xerox Corporation. All rights reserved. Copyright protection claimed includes all forms and matters of copyrightable material and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the [...]
-
Seite 3
Notices Installation caution Your Xerox 4220/MRP And 4230/MRP printers are not customer installable. Only a Xerox service representative should install the equipment. Safety CAUTION: This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the installation requirements, may cause inter[...]
-
Seite 4
NOTICES Europe: 50 Hz, 220 - 240 V equipment This equipment has been tested and certified in conformance with European commission directive 82/499/ECC and VDE 0871/0875, Class A, relating to radio frequency interference. CAUTION: In order to allow this equipment to operate in proximity to Industrial, Scientific and Medical (ISM) equipment, the exte[...]
-
Seite 5
NOTICES Warning labels There are several user accessable Laser Safety Warning labels located on the printer. These are as shown on the next two pages. DANGER-invisible laser radiation when open and interlock defeated for service. AVOID DIRECT EXPOSURE TO BEAM. Instructions for safe service are in SERVICE MANUAL.[...]
-
Seite 6
NOTICES 60hz. Configuration 50hz. Configuration These laser warning labels are placed on panels that cover areas that are not operator serviceable. These panels are not to be removed. vi XEROX MRP FAMILY COAX COMMAND REFERENCE[...]
-
Seite 7
NOTICES Operational safety Your Xerox equipment and supplies are designed and tested to meet strict safety requirements. These requirements include safety agency examination, approval, and compliance with established environmental standards. Follow these notes to ensure safe operation of your equipment. Do this Always connect equipment to a properl[...]
-
Seite 8
NOTICES Approvals and certification 60 Hz, 115 V Listed by Underwriters Laboratories (UL), UL1950. Meets CSA standards, C22.2 NO 950. 50 Hz, 220 - 240 V UL classified to IEC 950 The CE marking applied to this product symbolises Rank Xerox Declaration of Conformity with the following applicable Directives of the European Union as of the dates indica[...]
-
Seite 9
NOTICES International configuration of ELCI/RCD 1 Window 2 Reset button. If power to the printer is interrupted, follow these steps: 1. Locate the safety device, using the U.S. or International Configuration (refer to the appropriate illustration). 2. Check to see if a red flag displays in the window of the safety device. 3. If the red flag does no[...]
-
Seite 10
[...]
-
Seite 11
Table of contents Notices iii Installation caution iii Safety iii Laser safety iv Operational safety vii Introduction xix About this manual xix Conventions xix 1. Overview and printer setup 1-1 Emulated printers 1-1 Features and compatibilities 1-3 MRP Family user interface interaction with coax interface 1-3 Printer setup 1-3 Print Language Setup [...]
-
Seite 12
TABLE OF CONTENTS SCS data stream structure 2-5 Command summary 2-5 Supported SCS commands 2-6 SCS command comparison 2-6 Command descriptions 2-7 Back Space (BS) 2-7 Bell (BEL) 2-8 Carriage Return (CR) 2-8 Enable Print (ENP) 2-8 Form Feed (FF) 2-8 Graphic Escape (GE) 2-9 Horizontal Tab (HT) 2-9 Inhibit Print (INP) 2-9 Interchange Record Separator [...]
-
Seite 13
TABLE OF CONTENTS T1—Offline Hex Dump (PCIA Dump) 3-10 T2—Online Hex Dump 3-10 T3—Online ASCII Hex Dump 3-10 T4—Printout Settings 3-10 T5—Printout Character Set 3-11 T6—Cancel Online ASCII Hex Dump 3-11 W—Print Bar Code 3-11 X0—Set Printer in Hold Mode 3-11 X1—Store Settings in Permanent Storage 3-11 X2—Restore Settings from Per[...]
-
Seite 14
TABLE OF CONTENTS Y44—Suppress CR and SP to Same Position 3-37 Y46—Set IRQ Timer 3-38 Y47—ESC-Mode Selection 3-39 Y48—Set Permanent Escape 3-40 Y49—Restrict Access of Temporary and Permanent Settings 3-40 Y50—FF After Time Elapse 3-41 Y51—User Strings at Power Up 3-41 Y57—User-defined String Before Local Copy 3-42 Y58—User-defined[...]
-
Seite 15
TABLE OF CONTENTS Logical Page Size 3-68 4. Font support and selection 4-1 Supported fonts 4-1 Included fonts 4-1 Global Font Identifiers (GFIDs) 4-3 GFID to PCL font mapping 4-3 Print density to GFID mapping 4-4 Font selection via FSL in coax 4-5 Font selection using printer resident PCL fonts 4-5 Font selection using the 3812/3816 compatibility f[...]
-
Seite 16
TABLE OF CONTENTS 7. Configuration and Resource Utility (MVS) 7-1 Installing your Configuration and Resource Utility 7-1 Invoking the configuration and Resource Utility 7-6 Managing fonts 7-6 Loading fonts 7-7 Accessing the Font List screen 7-8 Managing forms 7-8 Loading Xerox forms 7-9 Accessing the Form List screen 7-9 Managing lists of resources[...]
-
Seite 17
TABLE OF CONTENTS C. Command summary C-1 D. Coax communications buffer D-1 Communications buffer D-1 Printer Output Area D-2 Contol Unit Output Area D-4 Orders D-7 E. IBM GFID to PCL fonts attribute E-1 F. Helpful hints F-1 G. Query Replies G-1 H. Related Publications H-1 I. Forms Utility for the coax environment I-1 Glossary GLOSSARY–1 Index IND[...]
-
Seite 18
[...]
-
Seite 19
Introduction The Xerox MRP Family Coax Command Reference , intended as a learning tool and as a reference guide, provides the user, host system programmer, and the System Administrator with a comprehensive reference to printing on the Xerox MRP Family coax printers. About this manual The procedures presented in this manual assume that you have a ba[...]
-
Seite 20
INTRODUCTION • Variable information (for example, password ) • For emphasis. X Represents hexadecimal (HEX) code. For example: X'05' or X'25' MB Megabyte. KB Kilobyte. GSM Grams per one square meter of paper. type When instructed to type information, do not press the Enter key. enter “Enter” is used to describe a two-ste[...]
-
Seite 21
INTRODUCTION 222 Indicates that this key must be pressed three times. Window messages Reference to messages displayed at the control panel appear in text like this: PLEASE WAIT... FINISHING CURRENT JOB Procedure conventions—personal computer (PC) Keyboard key A keyboard key name is boldface with downstyle capitalization. For example: Press the Ta[...]
-
Seite 22
[...]
-
Seite 23
1. Overview and printer setup This chapter describes the operation of the Xerox MRP Family printers internal interfaces in a coax environment. Refer to the “Overview” chapter in your Xerox MRP Printer Operator Guide for detailed descriptions of the features, operating environment, hardware and software requirements of your MRP Family printer. E[...]
-
Seite 24
OVERVIEW AND PRINTER SETUP Table 1-1. Xerox printer coax emulations Printer (Model) Type Speed CPI LPI Character sets 3287 (1,2) Dot-matrix 80/120 cps (models1/2) 10 3, 4, 6, 8 Various 3268 (2, 2C) Dot-matrix Up to 340 cps 10, 16.7 3, 4, 6, 8 Various 3262 (3, 13) Band printer Up to 650 lpm 10 3, 4, 6, 8 Depends on band mounted: 48—128 characters [...]
-
Seite 25
OVERVIEW AND PRINTER SETUP Features and compatibilities Your Xerox coax printers support the following features and compatibility, and have these capabilities: • Control of coax setup using a set of Host Utilities. These utilities provide a high-level user interface to the set of Function Selection via Line (FSL) commands that properly customize [...]
-
Seite 26
OVERVIEW AND PRINTER SETUP If coax jobs are printed from Tray 5, set the “Tray 5 Size Setup” option to a size supported by the Xerox MRP Family PCL emulation only. This also applies to the manual settings of the other paper trays. The 11 standard size paper stocks and envelopes are documented in the "Print language setup menu" section[...]
-
Seite 27
OVERVIEW AND PRINTER SETUP For A4 paper use: &&??@@Y96,204@ &&??@@Y62, 104, 1B, 28, 32, 30, 32, 30, 34, 58, 1B, 26, 6C, 31, 6F, 35, 2E, 33, 30, 43@ &&??<space> This FSL sequence defines the PCL code that selects FONT0204 as the default landscape font and set the vertical motion index to avalue that will allow for 66 li[...]
-
Seite 28
OVERVIEW AND PRINTER SETUP Configuring the Coax interface card Figure 1-1 illustrates the top view, and figure 1-2 illustrates the side view of the coax interface card. You should never attempt to remove the interface card from the printer motherboard. Your service representative configures the coax interface card to your specifications at installa[...]
-
Seite 29
OVERVIEW AND PRINTER SETUP Page size The default page size is set with a 2-pin jumper ( ST1 ). The jumper is turned OFF by placing the jumper shunt over only 1 pin, as shown in the illustration at left. The jumper is turned ON by covering both pins. Turning the jumper OFF sets the page size default to U. S. (8.5x11). Turning the jumper ON sets the [...]
-
Seite 30
OVERVIEW AND PRINTER SETUP section of the “Utilities menu” chapter of the Xerox MRP Family System Administration Guide (refer to Figure 1-3 example). Figure 1-3. Sample of a Coax Interface Configuration Report 1-8 XEROX MRP FAMILY COAX COMMAND REFERENCE[...]
-
Seite 31
OVERVIEW AND PRINTER SETUP FSL cross reference for the coax configuration page The default settings on the coax configuration page are printed using references to the FSL (Function Select via Line) command numbers. A list of the items that are printed on the configuration page is shown in table 1-2. Next to each item is an abbreviated configuration[...]
-
Seite 32
OVERVIEW AND PRINTER SETUP Printing of blank pages after downloading configuration and font data Your MRP Family usually prints a blank page after a configuration description or a font is downloaded from the Configuration and Resource Utility. This blank page is required to properly invoke the commands that reconfigure the printer or store the font[...]
-
Seite 33
2. DSC and SCS data stream commands The emulated IBM printers support a range of data stream commands. Some commands are ignored by certain models, while others are implemented within the feature restrictions imposed by the particular printer. The data stream commands described in this chapter control the formatting of the printed data. Your Xerox [...]
-
Seite 34
DSC AND SCS DATA STREAM COMMANDS Command summary and comparison Table 2-1 is a summary of DSC commands that the Xerox coax printer handles for the various printers emulated. Refer to the “Function Selection via Line (FSL) commands” chapter to check the commands corresponding to the DSC options. • = Supported as described in this manual. Blank[...]
-
Seite 35
DSC AND SCS DATA STREAM COMMANDS DSC command descriptions The descriptions of the DSC commands, shown in hexadecimal, are listed alphabetically. Carriage Return (CR) 05 Moves the print position to the left margin of the current line in an unformatted print field. In a formatted print field or unformatted nonprint field, this control code is printed[...]
-
Seite 36
DSC AND SCS DATA STREAM COMMANDS Null (NUL) 00 This control code does not cause any printer function. In unformatted mode, the printer treats this code as a space for both print and nonprint fields. In formatted print or nonprinted fields, a null character is printed. 00 Control sequence of a Null command Reserved codes 04 06 07 These control codes[...]
-
Seite 37
DSC AND SCS DATA STREAM COMMANDS SCS data stream structure The SNA Character String (SCS) has a relatively simple structure consisting of a 1-byte hexadecimal control code followed by the data to be printed. Multiple control codes can be inserted into SCS by printing applications in a specific order to achieve certain types of output. The SCS mode [...]
-
Seite 38
DSC AND SCS DATA STREAM COMMANDS Supported SCS commands Table 2-3 shows the commands in hexadecimal, and presented alphabetically, supported by the different emulations for Systems Network Architecture (SNA) Character String (SCS). SCS command comparison Table 2-3 shows how your Xerox coax printers handle the SCS commands for the IBM coax printer e[...]
-
Seite 39
DSC AND SCS DATA STREAM COMMANDS Table 2-3. SCS coax commands (continued) SCS command 3262 3268 3287 4214 3812/16 4028 4245 6262 Comment Page Presentation Media (PPM) 2BD2nn48xxxxxxsddoddxxxxxxxx • Set Attribute (SA) 28ttvv • • • • For APL, color and underline Set Graphic Error Action (SGEA) 2BC803grop • Set Horizontal Format (SHF) 2BC1[...]
-
Seite 40
DSC AND SCS DATA STREAM COMMANDS Bell (BEL) 2F Turns on the attention indicator to show that operator action is required and sounds the alarm if it is not disabled. The printer stops and waits for operator attention. (This command is currently accepted but ignored.) 2F Control sequence of a Bell command Carriage Return (CR) 0D Moves the print posit[...]
-
Seite 41
DSC AND SCS DATA STREAM COMMANDS Remember • For the 3812 emulation, if the maximum page length is set to 1, the Form Feed command causes a new line to occur. Any other page length causes the printer to eject the current page on receipt of a form feed. • You should not use the New Line command when moving the print position from one form to the [...]
-
Seite 42
DSC AND SCS DATA STREAM COMMANDS Interchange Record Separator (IRS) 1E Moves the print position to the first position on the next line. If the current position is at the end of a page, the print position moves to the first line of the next page. The print position moves to the effective left margin of those printers that support the Set Horizontal [...]
-
Seite 43
DSC AND SCS DATA STREAM COMMANDS Page Presentation Media (PPM) 2BD2nn48xxxxxxsddoddxxxxxxxx Specifies the presentation media device settings of the printer. PPM specifies the source paper tray, the output tray offset, and the output tray. 2B Control sequence prefix of a Page Presentation Media command D2 Command class for a Page Presentation Media [...]
-
Seite 44
DSC AND SCS DATA STREAM COMMANDS Set Attribute (SA) 28ttvv SA specifies an attribute associated with subsequent characters in the data stream. The codes remain valid until a new SNA chain begins or a new SA code changes the value of the character attribute. This command is used for APL, color, and underline. 28 Control sequence prefix of a Set Attr[...]
-
Seite 45
DSC AND SCS DATA STREAM COMMANDS Set Graphic Error Action (SGEA) 2BC803grop Defines the action to be taken when a character in the data stream is not in the currently selected character set and cannot be printed (an unprintable graphic character). 2B Control sequence prefix of a Set Graphic Error Action command C8 Command class for a Set Graphic Er[...]
-
Seite 46
DSC AND SCS DATA STREAM COMMANDS Set Horizontal Format (SHF) 2BC1nnhhlmrmht...tn Defines the maximum number of characters per line, left margin, right margin, and horizontal tabs. It activates the auto new line function. 2B Control sequence prefix of a Set Horizontal Format command C1 Command class for a Set Horizontal Format command nn Number of b[...]
-
Seite 47
DSC AND SCS DATA STREAM COMMANDS lm (continued) A one-byte number that specifies the column value of the left most print position. If lm is a positive number but less than the maximum print position (MPP), the value is adopted as the left margin setting. If lm is X'00' or nn is less than X'03,' defaults are used for the left mar[...]
-
Seite 48
DSC AND SCS DATA STREAM COMMANDS Set Line Density (SLD) 2BC6nnld Defines the vertical space required for one print line (Lines Per Inch or LPI) overriding those set at the control panel. 2B Control sequence prefix of a Set Line Density command C6 Command class for a Set Line Density command nn Number of bytes in the command string including the byt[...]
-
Seite 49
DSC AND SCS DATA STREAM COMMANDS Set Print Density (SPD) 2BD2nn2900cp Defines the number of characters to print per horizontal inch (CPI) or characters per line (CPL). 2B Control sequence prefix of a Set Print Density command D2 Command class for Set Print Density nn Number of bytes in a command string including the byte count Valid nn are: 02 = de[...]
-
Seite 50
DSC AND SCS DATA STREAM COMMANDS Set Vertical Format (SVF) 2BC2nnvvvtmbmvt1...tn Specifies the maximum number of lines per page, top margin, bottom margin, and vertical tabs. The first 12 tabs specify the Vertical Channel Select stops. On processing this command, the current line becomes logical line one, except on the 3812 emulation where it cause[...]
-
Seite 51
DSC AND SCS DATA STREAM COMMANDS tm (continued) A one-byte number that specifies the first print line of the page If tm is a positive number, but less than or equal to the maximum page length (MPL), the value is adopted as the top margin setting. If tm is X'00' or nn is less than 3, defaults are used for the top margin. If tm is greater t[...]
-
Seite 52
DSC AND SCS DATA STREAM COMMANDS Transparent (TRN) 35nn Indicates the start of a transparent data stream. Since you define the data within a transparent stream, the printer does not scan the SCS data for control codes. A hyphen is substituted, however, for all codes below X'40.' 35 Control sequence prefix of a Transparent command nn Numbe[...]
-
Seite 53
DSC AND SCS DATA STREAM COMMANDS starting in line 4, you must enter four VCS commands. Unprintable characters appear on the paper as spaces. There are two different 3268 and 4214 emulations. When using the first 3268 and 4214 emulations, the system sends the number of Line Feed commands required by the selected Vertical Format command. This means y[...]
-
Seite 54
[...]
-
Seite 55
3. Function Selection via Line (FSL) commands This chapter describes the Function Selection via Line (FSL) commands. FSL sequences are special escape sequences which download settings to the printer. The command allows you to set up default interfaces or change default settings. FSL commands access the value-added features (like duplex emulation, p[...]
-
Seite 56
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Table 3-1. Memory Exchange Settings Syntax Function <Esc>X1 Saves the temporarily defined settings in the permanent memory. <Esc>X2 Restores the settings from permanent storage. <Esc>X3 Restores the settings to factory default settings. <Esc>X4 Restores the settings to power up defa[...]
-
Seite 57
FUNCTION SELECTION VIA LINE (FSL) COMMANDS FSL escape character The coax interface for the Xerox MRP Family is managed by special escape sequences sent to the printer using the FSL commands. FSL escape sequences are command sequences preceded by a user-defined escape character. When an FSL escape character appears in the data stream, the printer in[...]
-
Seite 58
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Where @ is the single character used as the interface escape character and must be in the range X'40' to X'FF.' If a value of X'40' (space character) is used, then the current interface escape character is reset and no interface escape character is defined. For example, to def[...]
-
Seite 59
FUNCTION SELECTION VIA LINE (FSL) COMMANDS 3. Save the setting using the command <ESC> <X1>. FSL types All FSL commands begin with a leading escape character: • T —Test functions • W —Bar Code printing • X —Memory exchange • Y —Setup functions • Z —Sending of user strings. Only FSL command types W and Y end with a tr[...]
-
Seite 60
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Table 3-2. FSL Commands (continued) FSL Command name X4 Restore Settings from Permanent Storage Y1 Set IBM Buffer Size Y2 Set Default LPI Y3 Set Default CPI Y4 Set Default Line Spacing (single/double) Y5 Set Default Maximum Page Length (MPL) Y6 Set Default Maximum Print Position (MPP) Y7 Set Case (mono, du[...]
-
Seite 61
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Table 3-2. FSL Commands (continued) FSL Command name Y44 Suppress CR and SP to Same Position Y46 Set IRQ Timer Y47 ESC-Mode Selection Y48 Set Permanent Escape Y49 Restrict Access of Temporary and Permanent Settings Y50 FF After Time Elapse Y51 User Strings at Power Up (PWO) Y57 User-defined String Before L[...]
-
Seite 62
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Table 3-2. FSL Commands (continued) FSL Command name Y94 Typeface Strings Y96 GFID Select Y98 Enable Automatic Page Orientation (APO) Support Y100 Printer Share String and Timer Y119 Enable Auto Paper Size Configuration Y120 Setting Printout at Power Up Y249 Enter Engineering Mode Y253 Allow Passwords Z Se[...]
-
Seite 63
FUNCTION SELECTION VIA LINE (FSL) COMMANDS defined trailing escape character. Commas are used as delimiters, and are not expressly explained for each command. ESC—Single Paired Hex Transparent @<HEX>@<HEX> . . . @<HEX> Sends hexadecimal (HEX) codes transparently to the printer. This function is also used to execute user-defined [...]
-
Seite 64
FUNCTION SELECTION VIA LINE (FSL) COMMANDS When using the @@ ! ascii ascii @@ syntax, an escape character (X'1B') substitutes the character “!.” Example @@1B 5C 31 32@ The two leading escape characters of this command string tells the interface that the following characters should be treated in pairs as hexadecimal codes, until the ne[...]
-
Seite 65
FUNCTION SELECTION VIA LINE (FSL) COMMANDS T5—Printout Character Set @T5 Prints the character sets. T6—Cancel Online ASCII Hex Dump @T6 Stops Online ASCII Hexadecimal Dump. Applying test 6 will cancel test 3 (T3). W—Print Bar Code @W n ,data@ Converts data to bar code. n Number from 1 to 8 indicating the bar code number data Data must not exc[...]
-
Seite 66
FUNCTION SELECTION VIA LINE (FSL) COMMANDS X2—Restore Settings from Permanent Storage @X2 Restores nonvolatile memory (NVM) to random access memory (RAM). The printer will be updated with the escape strings, according to these settings. This command saves all current settings in NVM including the interface escape character. X3—Restore Factory D[...]
-
Seite 67
FUNCTION SELECTION VIA LINE (FSL) COMMANDS For consistent operation, configure your 4220/MRP or 4230/MRP coax interface to match the buffer size required by your host system. This command only takes effect the next time that the printing system is initialized and the settings have been saved in non- volatile memory (NVM). Refer to the “Features?[...]
-
Seite 68
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Y3—Set Default CPI @Y3, n @ Selects the default value for characters per inch (CPI) that is used at power up. The factory default setting is 10 characters per inch. n Valid parameters are: 10* for 10 CPI 12 for 12 CPI 15 for 15 CPI 16 for 16.7/17.1 CPI 20 for 20 CPI 27 for 27 CPI. Changes in the default [...]
-
Seite 69
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Example @Y4, 2@ sets the protocol converter to double space default. Y5—Set Default Maximum Page Length (MPL) @Y5, n @ Selects current and default form length. It selects the power up default value for the Maximum Page Length (MPL) in units of single line spaces. n Valid parameters are: 000—255 Indicat[...]
-
Seite 70
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Y6—Set Default Maximum Print Position (MPP) @Y6, n@ Selects current and default maximum print position (MPP) in characters from the left margin. The factory default setting is 132. n Valid parameters are: 000—255 Set MPP in number of characters Default setting is 132. This function emulates a front pan[...]
-
Seite 71
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Y8—Set LU1 Language @Y8, n @ Selects the LU1 language translate table at power up, and has effect as soon as it is received. The factory default setting is 00. If the conversion table is not loaded, then 01 is used as default. n Valid parameters are: 00* Download LU1 language from 3174 control unit or 32[...]
-
Seite 72
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Example @Y8, 30@ sets the printer language to French 105 character set. Y9—Set Default Print Quality @Y9, n @ Selects current and default font under the Page Presentation Media SCS command. Refer to the “qq” parameter of the Page Presentation Media (PPM) command in the “Page Presentation Media (PPM[...]
-
Seite 73
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Y10—Set Page Format @Y10, <n1>, {n2}@ Selects an exact or scaled page format on page boundary. If no value is entered for n 2, the n 1 value is used for all trays. Refer also to FSL Y62 command that affects this function. n 1 Valid values are: 0* Portrait (No compression or scaling) 1 Landscape (No[...]
-
Seite 74
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Only n 1 = 0 or 1 is supported for envelope feeder. (Refer to related FSL function Y11.) If n 1 is greater than 3 ( n 1>3), then FSL Y62—Setup for IBM- defined Strings command is not used. Example @Y10, 1@ selects landscape format with no scaling. Y11—Set Default Paper Path @Y11, <n1>, {n2}@ S[...]
-
Seite 75
FUNCTION SELECTION VIA LINE (FSL) COMMANDS that shows how to access the paper trays of all MRP family printers. When selecting the n2 parameter, linkage is set up between the input tray specified in n1 and the output tray specified in n2 . The only values supported for n2 are 1 and 2. When you select an output tray via the Y11 command, keep in mind[...]
-
Seite 76
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Y12—Set Default Paper Size @Y12, n1 [,n2]@ Selects paper size. As with FSL Y11, a PCL5 command selects the proper paper size. The table lists the supported paper sizes and illustrates how they map to PCL5 for the MRP family of printers. Also, the table identifies whether the AS/400 Utility provides acces[...]
-
Seite 77
FUNCTION SELECTION VIA LINE (FSL) COMMANDS defined in Y12, which could be different from what actually was loaded. In the new releases, the system detects the actual size loaded in the tray and automatically formats for that size paper. Y13—Set Wrap/Cut Option at Physical Paper Size @Y13, <n1> [ , n2]@ Sets print line overflow action. If no[...]
-
Seite 78
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Y14—Enable Graphic Option @Y14, n @ Enables connection of IBM 3812 Page Printer using the ida 3812 software. It also enables the use of ida 820 Advanced Funtion Printing (AFP) software package. n 1 Values for n 1 are: 0 Disable Graphics 1* Enable Graphics No guarantee for vertical formatting is given if [...]
-
Seite 79
FUNCTION SELECTION VIA LINE (FSL) COMMANDS the document you wish to print in duplex. This is especially important if the document has an uneven number of pages. N Note: The duplex setting cannot be saved in Permanent Storage with the X1 command. If you share a printer with other users, it is important that you remember to set function 19 to simplex[...]
-
Seite 80
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Example @Y25, 1@ sets Form Feed Before Local Copy. ON Start of buffer OFF Print position 1 2 3 Page boundary Next form Present form Same print line Next print line Next print line Last print line MPP+1 Y26—FF After Local Copy @Y26, n@ Selects a form feed to be performed after local copy. It determines th[...]
-
Seite 81
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Example @Y26, 1@ sets Form Feed After Local Copy. ON End of buffer o OFF Print position 1 2 3 Page boundary Next form Present form Same print line Next print line Next print lin e Last print line MPP+1 XEROX MRP FAMILY COAX COMMAND REFERENCE 3-27[...]
-
Seite 82
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Y27—Non-SCS Print Image @Y27, n@ Implements an IBM Request for Price Quotation (RPQ), and Compatibility modes for other converters. This function specifies how nulls are handled. The factory default is always for Null Line Suppression. n Values for n are: 0* Sets: • Null line suppression in Local Copy [...]
-
Seite 83
FUNCTION SELECTION VIA LINE (FSL) COMMANDS The n values 0 and 3 correspond to IBM parameters. The values 4 through 7 are implemented for compatiblity purposes with other protocol converters. This function is available in DSC LU3 mode, a non-SCS operation. Y28—Non-SCS, CR at MPP + 1 @Y28, n@ Implements an IBM RPQ and takes effect as soon as the co[...]
-
Seite 84
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Y29—Non-SCS, NL at MPP + 1 @Y29, n@ Implements an IBM RPQ and takes effect as soon as the command is received. This function controls how many lines are skipped when a New Line (NL) occurs at MPP+1. n Values for n are: 0* Next character position is 1st Print Position two lines down, when a New Line (NL) [...]
-
Seite 85
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Y30—Non-SCS, Valid FF Followed by Data @Y30, n@ Implements an IBM RPQ and takes effect as soon as the command is received. This function determines the first print position after the Form Feed (FF) command has been executed. n Values for n are: 0* Next print position is the 2nd Print Position (PP) on the[...]
-
Seite 86
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Y31—Non-SCS, Valid FF at End of Print Buffer @Y31, n@ Implements an IBM RPQ and takes effect as soon as the command is received. This function determines the print line position when a Form Feed command is the last command in the print buffer, or is immediately followed by an end of message code. n Value[...]
-
Seite 87
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Y32—Non-SCS, FF Valid @Y32, n@ Implements an IBM RPQ. This function determines when the position of the Form Feed command affects its execution. n Values for n are: 0* FF valid only at 1st Print Position in line or at Position MPP+1. 1 FF valid anywhere it occurs. This option only affects DSC LU3 mode, a[...]
-
Seite 88
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Y33—Non-SCS, Automatic Function at End of Job @Y33, n@ Implements an IBM RPQ and takes effect as soon as the command is received. This function determines the print position after the print buffer is completed or after an end of message is received. Settings different from the factory default is NOT reco[...]
-
Seite 89
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Y34—Last LF on Page Sent as FF @@Y34, n@ Decides whether the last line feed on a page should be sent as a Form Feed or a line feed. This option, when enabled, counts the number of lines and generates a form feed when the line count equals the page length. Calculations are based on the page length, which [...]
-
Seite 90
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Y37—IBM Printer Emulation Select @Y37, n @ Selects IBM printer emulation. n Values for n are: 0 3287/4214 emulation 1* 3268 emulation 2 3268 emulation. All values X'00'—X'3F' are sent transparently with the exception of valid SCS codes (refer to Table 2-3). 4 Transparent mode Table [...]
-
Seite 91
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Example @Y37, 0@ sets 3287 VCS emulation. Refer to the “Helpful hints” appendix for recommended settings to obtain a specific IBM printer emulation. Y38—IBM Communication Feature (Query, EAB) @Y38, n @ Enables query reply. n Values for n are: 0 Extended Attribute Buffer (EAB) but No Query Reply 1* EA[...]
-
Seite 92
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Y46—Set IRQ Timer @Y46, n 1 [, n 2] [, n 3]@ Sets Intervention Required (IRQ) time, Hold Time Out, and Busy Time Out. This function takes effect as soon as the command is received. n 1 Values for n 1 are: 000 Never send IRQ 001 to 255 Send IRQ after n 1 x 5 seconds if printer error 12* Send IRQ after 1 m[...]
-
Seite 93
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Y47—ESC-Mode Selection @Y47, n or @@!ascii ascii@ Sends hexadecimal (HEX) codes transparent to the printer, and selects Tel-a-graf support. This function takes effect as soon as it is received. ASCII mode is definition PCL 5 and PostScript Level 2 commands sent directly to the printer. n Valid values are[...]
-
Seite 94
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Y48—Set Permanent Escape @Y48, ’ n 1’@ or @Y48,<xx>@ Selects the permanent escape character. n 1 or <xx> Character for permanent escape character selected from the LU3 character table xx = 0 * No escape character Example 1 @Y48, ‘>’@ sets the character > as permanent escape char[...]
-
Seite 95
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Y50—FF After Time Elapse @Y50, n @ Flushes the page if unprinted data remains in the print buffer for a specified elapsed time. This function has effect as soon as the command is received. n Values for n are: 0* Do not flush page 1 to 255 Flush page after x seconds. Make sure that this function is set to[...]
-
Seite 96
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Y57—User-defined String Before Local Copy @Y57, <string number>@ Sets up the printer before local copy. 0 to 7 One or more strings indicated on the form ( n 1), ( n 2), . . . .( n x) in ascending sequence. This function only affects operator initiated local copy, and not host initiated copy. This f[...]
-
Seite 97
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Y59—Bar Code Definition @Y59, <Def. no.>, <Bar code type>, <Height> {,<Expansion>}@ Defines the bar code generated by function W n. Up to eight bar codes are defined and selected for use with function W—Print Bar Code. <Def. no.> Numeric value from 1 to 8 specifying the ba[...]
-
Seite 98
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Remember • The bar code definition must be sent BEFORE the W—Bar Code Printout command is used. • Many bar codes include checkdigits. • Text under the bar code is printed with the resident font. • As soon as the bar code is defined, it can be activated. • Start, stop, and center codes are gener[...]
-
Seite 99
FUNCTION SELECTION VIA LINE (FSL) COMMANDS • You must insert the checkdigit for this code as it is not uniquely specified. • Start, stop, and center codes are generated automatically. 3 of 9 (X9) • Have alphanumeric characters, automatic checking, and variable length with no checkdigits. • You may insert the start and stop codes, but if you[...]
-
Seite 100
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Refer also to the FSL “Y3—Set Default CPI” section. Table 3-3. GFID = Pitch equivalence GFID Pitch 1—65 10 CPI 66—153 12 CPI 154—200 Proportional Spaced Mode (PSM) 201—210 13.3 CPI 211—239 15 CPI 240—246 5 CPI 247—257 17.1 CPI (16.7 CPI) 258—259 18 CPI 260—273 8.55 CPI 274—279 17.[...]
-
Seite 101
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Table 3-4. Pitch choices Original pitch Selected pitch < / = 8.55 CPI 10 CPI > 8.55—10 CPI 13.3 CPI > 10—13.3 CPI 15 CPI > 13.3—17.1 CPI 20 CPI > 17.1 CPI 27 CPI Typographic 15 CPI Example 1 @Y60, 10, 18@ sets a link so 10 CPI selection using FSL Y3 or SCS are mapped to GFID 18. Exampl[...]
-
Seite 102
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Example 2 @Y61, 5, ’1B’*c300A*c30B’1B’*c0P@ In example 2, a user string with the ID of 5 is defined. The user string specifies a rule, 300 dots wide and 30 dots high, and prints it. Example 3 @Y61, n @ deletes a user string. Example 4 Sending a user string is done with a Z function as follows: @Z n[...]
-
Seite 103
FUNCTION SELECTION VIA LINE (FSL) COMMANDS < n > User-string ID number (00—FF) <string> LPI CPI Paper Feed Attributes User string contents in Hexadecimal (HEX) or characters with apostrophe notation # String: Choice for: PCL String: *24 Format for Y10=2 optional *25 Format for Y10=3 optional *101 3 LPI *102 4 LPI *103 (1) 6 LPI *104 ([...]
-
Seite 104
FUNCTION SELECTION VIA LINE (FSL) COMMANDS < n > User-string ID number (00—FF) <string> Quality Character Orientation Page orientation Color Page strings User string contents in Hexadecimal (HEX) or characters with apostrophe notation *140 (17) Draft *141 (18) Near Letter Quality *142 Correspondence 146 0 degree (Portrait) 147 90 degr[...]
-
Seite 105
FUNCTION SELECTION VIA LINE (FSL) COMMANDS < n > User-string ID number (00—FF) Page strings cont'd. Cursor position Graphic strings Font handling HMI Page pre- sentation Related 197 (International C5, Envelope 162mm x 229mm) 198 (Comm Envelope 98.4mm x 257mm) 199 (B5, Envelope 176mm x 250mm) 200 (B5, 182mm x 257mm) 201 (A3, 297mm x 420[...]
-
Seite 106
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Programming a string where the ID number is marked with an '*' causes the I/F to change to USER mode and all default strings are disabled except where marked with a '+'. To return to AUTO mode for a particular USER mode string (marked *) the string is defined with no parameters. Example[...]
-
Seite 107
FUNCTION SELECTION VIA LINE (FSL) COMMANDS <table number> Number that identifies the translate table in ranges 1 to 8. 1 Codepage 500 to Roman 8. 2 Codepage 500 to PC 8. 3 Codepage 500 to ECMA. 4 Codepage 259 to PC 8 (Box characters for drawing only). 5 Codepage 500 to ASCII 7 Bit. 6 Codepage 500 to OCR A (Equivalent to PCL translate table 1)[...]
-
Seite 108
FUNCTION SELECTION VIA LINE (FSL) COMMANDS The preferred method of selecting the translate table is to use FSL Y91 as this function not only specifies the translate table, but gives vital information on the font selection such as point size, typeface, symbol set, and attribute. Overwrite methods available • Change a single character. • Change a[...]
-
Seite 109
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Y77—Reset APL Translate Table @Y77,<table number>@ Clears all APL translate table changes, deletes a specified APL translate table, and resets APL translate tables to default. <table number> Number that deletes the indicated APL translate table change to preserve memory in ranges 1 to 8. Exam[...]
-
Seite 110
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Y80—Overwrite APL Translate Table @Y80, n 1, n 2, <data> [ : n 1, n 2, <data>]@ Matches the APL character table of the printer. Changes are made in the current selected translate table. The function modifies entries in the active customized translate table. The modifications become active imm[...]
-
Seite 111
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Y88—Define Page Offset @Y88 < n 1>, < n 2> {, n 3}@ Positions the logical page on the physical page. (Refer to the “Page Orientation algorithm” section in this chapter.) n 1 0 to +/- 32000 horizontal margin compensation in 1/1440 inch. Default value is 0. n 2 0 to +/- 32000 vertical margi[...]
-
Seite 112
FUNCTION SELECTION VIA LINE (FSL) COMMANDS n 1 0* Function is deactivated from next page boundary. Positioning is physical left margin 2/10". 1 Function is activated from next page boundary. Positioning is equal to IBM printers. Compensation for the physical left margin is always on. n 2 Valid values are: 1 Ignored 2 Tray 1 3 Tray 3 4 Manual f[...]
-
Seite 113
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Any result achievable by the use of other functions may also be carried out by the use of this function. A colon denotes that the next number is the HEX code number applied to the following escape sequence. You can have two levels of macros. Example @Y90, 1A, ‘ABCD’ :8F, ‘@Y8, 4@’ @ exchanges futur[...]
-
Seite 114
FUNCTION SELECTION VIA LINE (FSL) COMMANDS n 4 Symbol set can be 0—7 depending on the printer. n 5 Point size is the GFID number in decimal between 1 to 65535. If a GFID over 399 is defined with a non- proportional attribute, then the horizontal spacing (HMI) is calculated by dividing GFID with 100 (GFID/100). The following gives the GFID/Pitch r[...]
-
Seite 115
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Example 3 @Y91, 18, 0, 2, 1, 10@ is a syntax example in IBM Proprinter mode with the following settings: IBM GFID No.: IBM GFID 18 Typeface: Typeface No. 0 Attributes: Italic Symbol Set: Symbolset 1 Point Size: Point Size 10 Y92—Point Size Strings @Y92, n 1@ Sets font point size in association with Funct[...]
-
Seite 116
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Example @Y94, 01, 1B28733354@ selects the Courier typeface. Remember You do not actually need FSL Y92 through Y94 in order to support FSL Y91—GFID/Font Select Setup since the PCL strings for point size, attribute, symbol set, and typeface are generated by algorithm. Y96—GFID Select @Y96, <GFID>@ [...]
-
Seite 117
FUNCTION SELECTION VIA LINE (FSL) COMMANDS n 1 Valid values are: 0* Enable APO 1 Disable APO. For all n 1 values > 0, disable is selected. The default for coax interface is n 1 = 1. n 2 Valid values are: 1 Ignored 2 Tray 1 3 Tray 3 4 Manual feed 5 Tray 2 6 Tray 4 7-255 Reserved (optional feeder). Factory default for n 2 is all trays selected exc[...]
-
Seite 118
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Y119—Enable/disable automatic paper size configuration @Y119, n @ Enables or disables Automatic Papersize Configuration logic. n The valid values are: 0 Disables the Automatic Papersize Configuration logic. 1 Reserved for future use 2 Enables the Automatic Papersize Configuration logic. Remember: Do not [...]
-
Seite 119
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Y253—Allow passwords @Y253, n1, [n2]@ allows the use of passwords to be used in conjunction with FSL Y49. This FSL is only enabled in engineering mode (see Y249). n Values for n are: 0 Disable the use of passwords 1 Allow passwords Example Refer to the example used for Y49 in this document. Z—Send User[...]
-
Seite 120
FUNCTION SELECTION VIA LINE (FSL) COMMANDS a page if a page format change code has been placed before the font change. Blanks, margin settings, and SCS commands are not treated as printable characters. Remember Discrepancies between the logical page commands (MPP, MPL) and the physical page size (A4, orientation, etc.) may result in printing proble[...]
-
Seite 121
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Figure 3-1. Page orientation algorithm—1 Default orientation of selected tray—portrait? Auto Page Orientation enabled? Will logical page fit on physical page? Width >height? Print landscape NO NO NO YES YES YES YES YES Default orientation of selected tray— landscape? NO NO Start Page Orientation l[...]
-
Seite 122
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Logical Page Size The logical page size is used in Auto Page Orientation. Logical page length (LPL) and logical page width (LPW) determine the logical page size. Refer to Figure 3-2. LPL is governed by the top binding margin (TBM) and the length of the printable text. The text length is determined by the n[...]
-
Seite 123
FUNCTION SELECTION VIA LINE (FSL) COMMANDS Remember When operating in the SCS mode, the Set Horizontal Format commands override the MPP defaults. • Set Vertical Format command overrides MPL defaults. • Set Character Density command overrides CPI defaults. • Set Line Density command overrides LPI defaults. • SCS command overrides with the la[...]
-
Seite 124
[...]
-
Seite 125
4. Font support and selection This chapter describes font support and the relationships between IBM and Xerox fonts. The ability to install customized translate tables and cross reference tables between IBM and Xerox fonts provides you with flexibility for utilizing fonts to suit your individual requirements. Tables showing the character sets and t[...]
-
Seite 126
FONT SUPPORT AND SELECTION Table 4-1. 3816 emulation fonts and their corresponding GFIDs Font name GFID Font name GFID FONT0003 0003 FONT0112 0112 FONT0005 0005 FONT0155 0155 FONT0011 0011 FONT0159 0159 FONT0012 0012 FONT0160 0160 FONT0018 0018 FONT0162 0162 FONT0019 0019 FONT0163 0163 FONT0038 0038 FONT0173 0173 FONT0039 0039 FONT0175 0175 FONT004[...]
-
Seite 127
FONT SUPPORT AND SELECTION Global Font Identifiers (GFIDs) To provide automatic font selection within your Xerox MRP Family coax printer, Xerox fonts correlate to IBM font parameters. This correlation considers the IBM method of selecting fonts using Global Font Identifiers (GFIDs) as follows: • Data Processing (DP) mode • Word Processing (WP) [...]
-
Seite 128
FONT SUPPORT AND SELECTION Table 4-2. GFID interval and related pitch GFID Pitch 1—65 10 6—153 12 154—200 Proportional Spaced Mode (PSM) 201—210 13.3 211—239 15 240—246 5 247—257 17.1 258—259 18 260—273 8.55 274—279 17.1 280—284 20 285—289 25 290—299 27 300—399 12 Table 4-3. GFID interval and related pitch Print Density/[...]
-
Seite 129
FONT SUPPORT AND SELECTION Font selection via FSL in coax There are two methods to select fonts via FSL in coax: the Printer Resident Fonts or the 3812/3816 Compatibility Font Set. Font selection using printer resident PCL fonts The printer defaults to GFID 0011 unless otherwise defined. This GFID is mapped to a 12 point, Courier typeface 3, Roman-[...]
-
Seite 130
FONT SUPPORT AND SELECTION set to match pitch, if spacing is set to fixed, and font selection occurs. • The predefined table (refer to the “PCL font and IBM GFID” appendix) is examined and a selection occurs when a match is made. Horizontal Motion Index (HMI) is set to match pitch, if spacing is set to fixed, and font selection occurs. • To[...]
-
Seite 131
FONT SUPPORT AND SELECTION Table 4-4. COR font mapping Characters per inch (CPI) Selection 10 CPI - > 13.3 CPI 12 CPI - > 15 CPI PS -> 15 CPI PS fonts is treated as 12 CPI fixed spaced fonts in COR. 13.33 CPI - > 15 CPI 15 CPI - > 16.6 CPI 5 CPI - > 10 CPI 17.1 CPI - > 16.6 CPI HMI is set to 20 18 CPI - > 16.6 CPI HMI is set[...]
-
Seite 132
[...]
-
Seite 133
5. Error handling The Xerox MRP Family coax printers support IBM error types, IBM error code actions, and initialization errors. The printers recognize the following error categories: • IBM data stream error type 1 • IBM data stream error type 2 • IBM data stream error type 3 or invalid SCS parameter • IBM data stream error type 4 or invali[...]
-
Seite 134
ERROR HANDLING Recoverable printer errors Although the Xerrox Family MRP coax printer does not support print out of error codes and error codes are not shown in the display, the printer stops during a print operation, for instance, if the paper tray is empty. In such a case, a front panel message appears. Printing stops as soon as this kind of erro[...]
-
Seite 135
ERROR HANDLING Table 5-2. Recoverable errors (continued) Code Error Code Description 4003 Password error NVRAM is already locked, password is ignored. 5003 NVRAM error Checksum in NVRAM is wrong. 5004 NVRAM error Validation value in NVRAM is wrong. 5006 NVRAM error Values are now overwritten with factory defaults. Nonrecoverable hardware errors A r[...]
-
Seite 136
[...]
-
Seite 137
6. Configuration and sysgen samples This chapter provides you with examples of configurations for connecting your Xerox 4220/MRP or 4230/MRP coax printer to an IBM host. Coax printers line configurations Four of the possible line configurations are shown in this section. They are followed by sample sysgen programs. Your 4220/MRP or 4230/MRP coax pr[...]
-
Seite 138
CONFIGURATION AND SYSGEN SAMPLES Configuration 2 shows the 4220/MRP or 4230/MRP replacing the IBM 3287 on the same port. See Figure 6-2. Figure 6-2. Configuration 2 Host 3287 3268 4220/MRP 4230/MRP 3174 37X5 Transmission Control Units Configuration 3 shows the 4220/MRP or 4230/MRP attached to a previously unused port and the IBM 3287 attached to it[...]
-
Seite 139
CONFIGURATION AND SYSGEN SAMPLES Configuration 4 shows a 4230/MRP attached to a previously unused port, a 4219/MRP attached to a previously unused port through a communications module, and the IBM 3287 attached to its previous port. See Figure 6-4. Figure 6-4. Configuration 4 Host 3287 3268 4219/MRP 4230/MRP 3287 3174 37X5 Transmission Control Unit[...]
-
Seite 140
CONFIGURATION AND SYSGEN SAMPLES Sample IO Gen for the 3174/3274 —non-SNA controller DEVO20 IODEVICE UNIT=3287,ADDRESS=020,MODEL=2, FEATURE=(DOCHAR,EBKY3277,KB78KEY,NUMLOCK,AUDALRM) DEVO21 IODEVICE UNIT=3279,ADDRESS=021,MODEL=2A, FEATURE=(DOCHAR,EBKY3277,KB78KEY,NUMLOCK,AUDALRM) DEVO22 IODEVICE UNIT=3279,ADDRESS=022,MODEL=2A, FEATURE=(DOCHAR,EBKY[...]
-
Seite 141
CONFIGURATION AND SYSGEN SAMPLES Sample NCP Gen —Group, Line, PU, and LU definitions—3274-61C SNAGP01 GROUP LNCTL=SDLC, CLOCKING=EXT, DIAL=NO, DUPLEX=FULL, NEWSYNC=NO, NRZI=NO, REPLYTO=1, RETRIES=(1, 1, 2), TYPE=NCP * N05LN039 LINE ADDRESS=(039), ANS=CONTINUE, DUPLEX=(FULL), ETRATIO=30, PAUSE=.2, SERVLIM=4, SPEED=9600, VPACING=2 SPACE 3 SOTL039[...]
-
Seite 142
CONFIGURATION AND SYSGEN SAMPLES Sample NCP Gen —Group, Line, PU, and LU definitions—3276-C SNAGP02 GROUP LNCTL=SDLC, CLOCKING=EXT, DIAL=NO, DUPLEX=FULL, ISTATUS=ACTIVE, NEWSYNC=NO, NRZI=NO, PAUSE=.2, RETRIES=(7, 1, 3), SSCPFM=USSSCS, SPEED=9600, TYPE=NCP, USSTAB=USSVTAM * N05LN03B LINE ADDRESS=(3B), SPEED=9600 * SOTL039 SERVICE ORDER=(N0503BP0[...]
-
Seite 143
CONFIGURATION AND SYSGEN SAMPLES Sample mode table entries for 3278-2 terminals (by control unit type) MODE3270 MODETAB * MODEENT LOGMODE=S3270, LOCAL NON-SNA 3274 CONTROL UNIT FMPROF=X'02', 3278-2 TERMINAL TSPROF=X'02', PRIPROT=X'71', COS=HICOS, SECPROT=X'40', COMFPROT=X'2000', RUSIZES=X'0000&[...]
-
Seite 144
[...]
-
Seite 145
7. Configuration and Resource Utility (MVS) The Xerox Configuration and Resource Utility manages printer resources (fonts, forms, and the internal interface controller configuration descriptions) on a Multiple Virtual Storage (MVS) host. The utility is distributed on a 9-track tape 6250 BPI and 3480 cartridge. A set of Job Control Language (JCL) st[...]
-
Seite 146
CONFIGURATION AND RESOURCE UTILITY (MVS) If you have created or modified the configuration descriptions or user-created FSL members in a previous version of the Host Utility, make sure you save the changes by copying the members from your current CFGDLIB and from XMRPV.4220.UCRTLIB to XMRP.V1R2M1.UCRTLIB after installing the new version of the util[...]
-
Seite 147
CONFIGURATION AND RESOURCE UTILITY (MVS) You can change the Target XMRP to your High Level Qualifier or anything else, but remember to change the CLISTs accordingly. 2. The XMRP.V1R2M1. Install data set contains a job (LOADINST) to load the Resource Utility to DASD. • Tailor and submit for execution the LOADINST job from the XMRP.V1R2M1.INSTALL d[...]
-
Seite 148
CONFIGURATION AND RESOURCE UTILITY (MVS) The following IEBCOPY JCL is in your XMRP.V1R2M1.INSTALL DataSet: 000001 // XXXXXXXX JOB ( UUUU ), 000002 // ’LOADINST’,CLASS=A,MSGCLASS=X, 000003 // MSGLEVEL=(1,1),NOTIFY= XXXXXXX 000004 //* 000005//* IEBCOPY TO INSTALL AND ALLOCATE THE 000006//* THE XEROX RESOURCE UTILITY V1R2M1 000007//* RELEASE 1.2.1[...]
-
Seite 149
CONFIGURATION AND RESOURCE UTILITY (MVS) 000053//TARGET DD DSN=XMRP.V1R2M1.LINKLIB, 000054 // DISP=(,CATLG,DELETE),UNIT= 3380 , 000055 // SPACE=(6144,(539,63,25)), 000056 // DCB=(RECFM=U,BLKSIZE=6144), 000057 // VOL=SER= dddddd 000058 //SYSIN DD * 000059 COPY INDD= CART ,OUTDD=TARGET 000060 /* 000061 //LOD5 EXEC PGM=IEBCOPY,REGION=2048K 000062 //SY[...]
-
Seite 150
CONFIGURATION AND RESOURCE UTILITY (MVS) 000105 // VOL=(,RETAIN,,,REF=*.LOD1. CART ) 000106 //TARGET DD DSN=XMRP.V1R2M1.LSTLIB, 000107 // DISP=(,CATLG,DELETE),UNIT= 3380 , 000108 // SPACE=(27984,(28,18,10)), 000109 // DCB=(RECFM=FB,BLKSIZE=27984,LRECL=132), 000110 // VOL=SER= dddddd 000111 //SYSIN DD * 000112 COPY INDD= CART ,OUTDD=TARGET 000113 /*[...]
-
Seite 151
CONFIGURATION AND RESOURCE UTILITY (MVS) Table 7-1. 3816 emulation fonts Font name Font name Font name Font name FONT0003 FONT0060 FONT0112 FONT0253 FONT0005 FONT0066 FONT0155 FONT0254 FONT0011 FONT0068 FONT0159 FONT0281 FONT0012 FONT0069 FONT0160 FONT0290 FONT0018 FONT0070 FONT0162 FONT0751 FONT0019 FONT0071 FONT0163 FONT1051 FONT0038 FONT0072 FON[...]
-
Seite 152
CONFIGURATION AND RESOURCE UTILITY (MVS) In order to load multiple fonts you can create a CLIST that repeats the download command for each font that you wish to download. The following example shows a CLIST named ALLFONTS that you can create to download any number of the 55 fonts. It was created in the XMRP.V1R2M1.CLIST Library. TSO EXEC ’XMRP.V1[...]
-
Seite 153
CONFIGURATION AND RESOURCE UTILITY (MVS) Loading Xerox forms A program to download one form at a time is supplied with the utility. First store the form to be downloaded in the XMRP.V1R2M1.FRMLIB library. To download the form to the printer, enter the following command on the primary command line: ==> TSO EXEC ’XMRP.V1R2M1.CLIST(LDXRXFRM)’ ?[...]
-
Seite 154
CONFIGURATION AND RESOURCE UTILITY (MVS) name. Enter a name for this list followed by the enter key. This will put you into a standard TSO edit session. The following list would load two fonts and a configuration description: FONT=0204 FONT=0206 CFGD=YOURCFGD Press the PF3 key to save and exit. You may now perform the functions on the list that are[...]
-
Seite 155
CONFIGURATION AND RESOURCE UTILITY (MVS) ==> TSO EXEC ‘XMRP.V1R2M1.CLIST(LDXRXASC)’ ‘< file name > < printer destination >’ VPS 6.2 transparency VPS 6.2 supports a transparency option. If this option is used, a sysout class is enabled to support this feature, and you must make two modifications to the LDXRXFNT and LDXRXFRM cl[...]
-
Seite 156
CONFIGURATION AND RESOURCE UTILITY (MVS) DUPLEX configuration, to the printer enter the following on the command line: ==> TSO EXEC ’XMRP.V1R2M1.CLIST(LDXRXCFG)’ ‘DUPLEX <printer destination>’ DUPLEX Configures the 4220/MRP printer for Duplex, long. INTL3262 Configures the 42XX/MRP printer as an international IBM 3262 band printer,[...]
-
Seite 157
CONFIGURATION AND RESOURCE UTILITY (MVS) Creating a configuration file Enter the following command to invoke the create configuration screen: ==> TSO EXEC ’XMRP.V1R2M1.CLIST(CRTCFGD)’ To create a configuration file, enter the values or use the default for each option shown on the screen. The value typed for NAME OF CONFIG DESCRIPTION becomes[...]
-
Seite 158
CONFIGURATION AND RESOURCE UTILITY (MVS) CAUTION: If the name entered is invalid and the correct syntax for the FSL name is not known, type NONE in uppercase letters, press <Enter>, then <PF3> to exit. Note You can change FSL Y4 - Set Default Line Spacing (Line Spacing - Single, Double) with the utility but the change does not appear on[...]
-
Seite 159
CONFIGURATION AND RESOURCE UTILITY (MVS) Press the <Enter> key to return to the MVS utility screen, which displays the message: “. . . . . data set not available” Loading a configuration file After typing L , press <Enter>. The host responds by displaying this message: PLEASE ENTER PRINTER DESTINATION. Type the remote id for the pri[...]
-
Seite 160
CONFIGURATION AND RESOURCE UTILITY (MVS) CONTROL, there is no FSL for this command. If you wish to store the settings into memory, change the last line to: @Y50,0@@X1&&??<space> Configuration and Resource Utility components The following is a list of entities included in your utility: • XMRPV1R2M1CLIST—invokes create or change con[...]
-
Seite 161
CONFIGURATION AND RESOURCE UTILITY (MVS) Accessing the MVS ISPF Primary Option Menu After logging on, the MVS ISPF Primary Option Menu screen displays: ISPF Primary Option Menu OPTION = = => 0 ISPF PARMS - Specify terminal and user parameters 1 BROWSE - Display source data or output listings 2 EDIT - Create or change source data 3 UTILITIES - Pe[...]
-
Seite 162
CONFIGURATION AND RESOURCE UTILITY (MVS) Invoking the Configuration and Resource Utility You can invoke the Configuration and Resource Utility main menu from the ISPF command line by entering the following onto the primary command line: ==> TSO EXEC ’XMRP.V1R2M1.CLIST(XRSCMNU)’ The main menu for the utility then appears and you can enter one[...]
-
Seite 163
CONFIGURATION AND RESOURCE UTILITY (MVS) Create Configuration Description The Xerox Resource Utility, Create Configuration Description screen allows you to create configuration descriptions for the internal interface card on the host. The configuration description object or file converts the values selected from the screen to the appropriate Functi[...]
-
Seite 164
CONFIGURATION AND RESOURCE UTILITY (MVS) • Name of user-created FSL. The Name of Configuration Description field must be any 8- character name starting with an alpha character. Press F8 to go to the second screen. 2nd screen The Create Configuration Description second screen displays: --------------------XEROX RESOURCE UTILITY -------------------[...]
-
Seite 165
CONFIGURATION AND RESOURCE UTILITY (MVS) For FSL Y60—Font Link for GFIDs, you need to refer to table 3-4 in the “Function Selection via Line (FSL) commands” chapter for the correct GFID pitch equivalent. Refer also to the “FSL escape character” section in the “Function Selection via Line (FSL) commands” chapter for additional informat[...]
-
Seite 166
CONFIGURATION AND RESOURCE UTILITY (MVS) --------------------------XEROX RESOURCE UTILITY Ver 1.2.1 --------------- ---------------------------CHANGE CONFIGURATION DESCRIPTION------------------ -----------------(Value 'NONE' does not create FSL for the CFGD)------------- NAME OF CONFIG DESCRIPTION = = => NAME LINES PER INCH = = => 6[...]
-
Seite 167
CONFIGURATION AND RESOURCE UTILITY (MVS) Saving a Change Configuration Description To save a Change Configuration Description, do the following: 1. Press F8 or the Enter key to go to the second screen. 2. Press the Enter key. The information on both screens will be saved. Handling error messages You may encounter the following error messages when w[...]
-
Seite 168
CONFIGURATION AND RESOURCE UTILITY (MVS) Creating configuration descriptions Command XMRPV1R2M1CLIST(CRTCFGD) PROC 0 ALLOC DA(’XMRPV1R2M1LINKLIB’) REUSE F(CTRANS) SHR ALLOC DA(’XMRPV1R2M1CFGDLIB’) REUSE F(CFGD) SHR CALL’XMRPV1R2M1LOAD(CRTCFGD)’ FREE F(CTRANS) FREE F(CFGD) Changing configuration descriptions Command XMRPV1R2M1CLIST(CHGCF[...]
-
Seite 169
CONFIGURATION AND RESOURCE UTILITY (MVS) Loading fonts Command XMRPV1R2M1CLIST(LDXRXFNT) PROC 2 FNTNAME DEST ALLOC DA(’XMRPV1R2M1LINKLIB’) REUSE F(CTRANS) SHR ALLOC DA(’XMRPV1R2M1FNTLIB’(&FNTNAME)’) F(FONT) REUSE SHR ALLOC SYSOUT(A) DEST(&DEST) F(PRTR) CALL’XMRPV1R2M1LOAD(LDXRXFNT)’ FREE F(CTRANS) FREE F(FONT) FREE F(PRTR) XER[...]
-
Seite 170
[...]
-
Seite 171
A. Font and code set tables This appendix shows PCL Translate Tables 1 through 8 applicable to the MRP Family coax interface printers. These tables are valid when the printer-resident fonts are used. If the compatibility fonts are used, a unique table is loaded automatically to access the full Code Page 500 character set that is supported. Table 7 [...]
-
Seite 172
FONT AND CODE SET TABLES Table A-1. PCL Translate Table 1: Codepage 500 to Roman 8 4x 5x 6x 7x 8x 9x Ax Bx Cx Dx Ex Fx x0 20 26 2D D6 D2 B3 F3 BF 7B 7D 5C 30 x1 20 C5 2F DC 61 6A AC BB 41 4A 20 31 x2 C0 C1 A2 A4 62 6B 73 BC 42 4B 53 32 x3 CC CD D8 A5 63 6C 74 F2 43 4C 54 33 x4 C8 C9 A1 A3 64 6D 75 BE 44 4D 55 34 x5 C4 D5 E0 E5 65 6E 76 BD 45 4E 56 [...]
-
Seite 173
FONT AND CODE SET TABLES Table A-2. PCL Translate Table 2: Codepage 500 to PC 8 4x 5x 6x 7x 8x 9x Ax Bx Cx Dx Ex Fx x0 20 26 2D F8 E6 9B 7B 7D 5C 30 x1 20 82 2F 90 61 6A 7E 9C 41 4A 20 31 x2 83 88 62 6B 73 9D 42 4B 53 32 x3 84 89 8E 63 6C 74 9E 43 4C 54 33 x4 85 8A 64 6D 75 9F 44 4D 55 34 x5 A0 A1 65 6E 76 15 45 4E 56 35 x6 8C 66 6F 77 14 46 4F 57 [...]
-
Seite 174
FONT AND CODE SET TABLES Table A-3. PCL Translate Table 3: Codepage 500 to ECMA 4x 5x 6x 7x 8x 9x Ax Bx Cx Dx Ex Fx x0 20 26 2D F8 D8 B0 B5 A2 7B 7D 5C 30 x1 20 E9 2F C9 61 6A A3 41 4A 20 31 x2 E2 EA C2 CA 62 6B 73 A5 42 4B 53 32 x3 E4 EB C4 CB 63 6C 74 B7 43 4C 54 33 x4 E0 E8 C0 C8 64 6D 75 44 4D 55 34 x5 E1 ED C1 CD 65 6E 76 A7 45 4E 56 35 x6 E3 [...]
-
Seite 175
FONT AND CODE SET TABLES Table A-4. PCL Translate Table 4: Codepage 259 to PC-8 (Only Box Characters for drawing) 4x 5x 6x 7x 8x 9x Ax Bx Cx Dx Ex Fx x0 20 x1 20 20 x2 x3 x4 x5 x6 x7 x8 x9 xA DA C2 BF xB C3 C5 B4 xC C0 C1 D9 xD B3 C4 xE xF XEROX MRP FAMILY COAX COMMAND REFERENCE A-5[...]
-
Seite 176
FONT AND CODE SET TABLES Table A-5. PCL Translate Table 5: Codepage 500 to ASCII 7- Bit 4x 5x 6x 7x 8x 9x Ax Bx Cx Dx Ex Fx x0 20 26 2D 30 x1 20 2F 61 6A 41 4A 20 31 x2 62 6B 73 42 4B 53 32 x3 63 6C 74 43 4C 54 33 x4 64 6D 75 44 4D 55 34 x5 65 6E 76 45 4E 56 35 x6 66 6F 77 46 4F 57 36 x7 67 70 78 47 50 58 37 x8 68 71 79 48 51 59 38 x9 69 72 7A 49 5[...]
-
Seite 177
FONT AND CODE SET TABLES Table A-6. PCL Translate Table 6: Codepage 500 to OCR A (Equivalent to PCL translate table 1) 4x 5x 6x 7x 8x 9x Ax Bx Cx Dx Ex Fx x0 20 26 2D D6 D2 B3 F3 BF 7B 7D 5C 30 x1 20 C5 2F DC 61 6A AC BB 41 4A 20 31 x2 C0 C1 A2 A4 62 6B 73 BC 42 4B 53 32 x3 CC CD D8 A5 63 6C 74 F2 43 4C 54 33 x4 C8 C9 A1 A3 64 6D 75 BE 44 4D 55 34 [...]
-
Seite 178
FONT AND CODE SET TABLES Table A-7. PCL Translate Table 7: Codepage 500 to OCR B (Equivalent to PCL translate table 1) 4x 5x 6x 7x 8x 9x Ax Bx Cx Dx Ex Fx x0 20 26 2D D6 D2 B3 F3 BF 7B 7D 5C 30 x1 20 C5 2F DC 61 6A AC BB 41 4A 20 31 x2 C0 C1 A2 A4 62 6B 73 BC 42 4B 53 32 x3 CC CD D8 A5 63 6C 74 F2 43 4C 54 33 x4 C8 C9 A1 A3 64 6D 75 BE 44 4D 55 34 [...]
-
Seite 179
FONT AND CODE SET TABLES Table A-8. PCL Translate Table 8: Codepage 500 to PC-850 4x 5x 6x 7x 8x 9x Ax Bx Cx Dx Ex Fx x0 20 26 2D 9B 9D F8 E6 BD 7B 7D 5C 30 x1 20 82 2F 90 61 6A 7E 9C 41 4A 20 31 x2 83 88 B6 D2 62 6B 73 BE 42 4B 53 32 x3 84 89 8E D3 63 6C 74 FA 43 4C 54 33 x4 85 8A B7 D4 64 6D 75 9F 44 4D 55 34 x5 A0 A1 B5 D6 65 6E 76 F5 45 4E 56 3[...]
-
Seite 180
FONT AND CODE SET TABLES Table A-9. Code Page 037—U.S. English 4x 5x 6x 7x 8x 9x Ax Bx Cx Dx Ex Fx x0 (SP) & - ø Ø ° µ ^{ } 0 x1 (RSP) é / É a j ~ £ A J (NSP) 1 x2 âê Â Ê bk s ¥ B K S2 x3 äë Ä Ë c l t • C L T 3 x4 à è À Èdmu ƒ DM U 4 x5 áí Á Íe n v § E N V 5 x6 ãî Ã Î f o w ¶ F O W 6 x7 åï Å Ï g p x G P [...]
-
Seite 181
FONT AND CODE SET TABLES Table A-10. Code Page 273—Austrian/German 4x 5x 6x 7x 8x 9x Ax Bx Cx Dx Ex Fx x0 (SP) & - ø Ø ° µ ¢äü Ö 0 x1 (RSP) é / É a j ß £ A J (NSP) 1 x2 âê Â Ê b k s ¥ B K S2 x3 {ë[ Ë c l t • C L T 3 x4 à è À Èdmu ƒ DM U 4 x5 áí Á Íe n v @ E N V 5 x6 ãî à Πf o w ¶ F O W 6 x7 åï Å Ïg p x [...]
-
Seite 182
FONT AND CODE SET TABLES Table A-11. Code Page 274—Belgian 4x 5x 6x 7x 8x 9x Ax Bx Cx Dx Ex Fx x0 (SP) & - ø Ø ° µ ¢éè ç0 x1 (RSP) { / É a j ¨ £ A J (NSP) 1 x2 âê Â Ê b k s ¥ B K S2 x3 äë Ä Ë c l t • C L T 3 x4 @} À Èdmu ƒ DM U 4 x5 áí Á Íe n v § E N V 5 x6 ãî à Πf o w ¶ F O W 6 x7 åï Å Ïg p x G P X 7 x[...]
-
Seite 183
FONT AND CODE SET TABLES Table A-12. Code Page 275—Brazilian 4x 5x 6x 7x 8x 9x Ax Bx Cx Dx Ex Fx x0 (SP) & - ø Ø ° µ ¢õ é 0 x1 (RSP) } / [ a j ~ £ A J (NSP) 1 x2 âê Â Ê b k s ¥ B K S2 x3 äë Ä Ë c l t • C L T 3 x4 à è À Èdmu ƒ DM U 4 x5 áí Á Íe n v § E N V 5 x6 `î @ Î f o w ¶ F O W 6 x7 åï Å Ïg p x G P X 7[...]
-
Seite 184
FONT AND CODE SET TABLES Table A-13. Code Page 276—French Canadian 4x 5x 6x 7x 8x 9x Ax Bx Cx Dx Ex Fx x0 (SP) & - ø Ø ° µ ¢éè ¸ 0 x1 (RSP) { / É a j ¨ £ A J (NSP) 1 x2 âê Â Ê bk s ¥ B K S2 x3 äë Ä Ë c l t • C L T 3 x4 [ } À Èdmu ƒ DM U 4 x5 áí Á Íe n v § E N V 5 x6 ãî à Πf o w ¶ F O W 6 x7 åï Å Ï g p x[...]
-
Seite 185
FONT AND CODE SET TABLES Table A-14. Code Page 277—Danish/Norwegian 4x 5x 6x 7x 8x 9x Ax Bx Cx Dx Ex Fx x0 (SP) & - ¦ @° µ ¢æå 0 x1 (RSP) é / É a j ü £ A J (NSP) 1 x2 âê Â Ê bk s ¥ B K S2 x3 äë Ä Ë c l t • C L T 3 x4 à è À Èdmu ƒ DM U 4 x5 áí Á Íe n v § E N V 5 x6 ãî à Πf o w ¶ F O W 6 x7 }ï $ Ï g p x [...]
-
Seite 186
FONT AND CODE SET TABLES Table A-15. Code Page 278—Finnish/Swedish 4x 5x 6x 7x 8x 9x Ax Bx Cx Dx Ex Fx x0 (SP) & - ø Ø ° µ ¢äåÉ 0 x1 (RSP) ` / a j ü £ A J (NSP) 1 x2 âê Â Ê b k s ¥ B K S2 x3 {ë #Ë c l t • C L T 3 x4 à è À Èdmu ƒ DM U 4 x5 áí Á Íe n v[ E N V 5 x6 ãî à Πf o w ¶ F O W 6 x7 }ï $ Ï g p x G P X[...]
-
Seite 187
FONT AND CODE SET TABLES Table A-16. Code Page 280—Italian 4x 5x 6x 7x 8x 9x Ax Bx Cx Dx Ex Fx x0 (SP) & - ø Ø [ µ ¢àè ç0 x1 (RSP) ] / É a j ì # A J (NSP) 1 x2 âê Â Ê bk s ¥ B K S2 x3 äë Ä Ë c l t • C L T 3 x4 { } À Èdmu ƒ DM U 4 x5 áí Á Íe n v @ E N V 5 x6 ãî à Πf o w ¶ F O W 6 x7 åï Å Ï g p x G P X 7 x8 [...]
-
Seite 188
FONT AND CODE SET TABLES Table A-17. Code Page 281—Japanese (Latin characters) 4x 5x 6x 7x 8x 9x Ax Bx Cx Dx Ex Fx x0 (SP) & - ø Ø ° µ ¢{ }$ 0 x1 (RSP) é / É a j ¯ [ A J (NSP) 1 x2 âê Â Ê bk s B K S2 x3 äë Ä Ë c l t • C L T 3 x4 à è À Èdmu ƒ DM U 4 x5 áí Á Íe n v § E N V 5 x6 ãî Ã Î f o w ¶ F O W 6 x7 åï ?[...]
-
Seite 189
FONT AND CODE SET TABLES Table A-18. Code Page 282—Portuguese 4x 5x 6x 7x 8x 9x Ax Bx Cx Dx Ex Fx x0 (SP) & - ø Ø ° µ ¢ã ´ Ç 0 x1 (RSP) é / É a j ç £ A J (NSP) 1 x2 âê Â Ê bk s ¥ B K S2 x3 äë Ä Ë c l t • C L T 3 x4 àè À È d m u ƒ DM U 4 x5 áí Á Íe n v § E N V 5 x6 {î #Î f o w ¶ F O W 6 x7 åï Å Ï g p x G[...]
-
Seite 190
FONT AND CODE SET TABLES Table A-19. Code Page 284—Spanish/Spanish speaking 4x 5x 6x 7x 8x 9x Ax Bx Cx Dx Ex Fx x0 (SP) & - ø Ø ° µ ¢{ } 0 x1 (RSP) é / É a j ¨ £ A J (NSP) 1 x2 âê Â Ê bk s ¥ B K S2 x3 äë Ä Ë c l t • C L T 3 x4 à è À Èdmu ƒ DM U 4 x5 áí Á Íe n v § E N V 5 x6 ãî Ã Î f o w ¶ F O W 6 x7 åï ?[...]
-
Seite 191
FONT AND CODE SET TABLES Table A-20. Code Page 285—U.K. English 4x 5x 6x 7x 8x 9x Ax Bx Cx Dx Ex Fx x0 (SP) & - ø Ø ° µ ¢{ } 0 x1 (RSP) é / É a j ¯ [ A J (NSP) 1 x2 âê Â Ê bk s ¥ B K S2 x3 äë Ä Ë c l t • C L T 3 x4 à è À Èdmu ƒ DM U 4 x5 áí Á Íe n v § E N V 5 x6 ãî Ã Î f o w ¶ F O W 6 x7 åï Å Ï g p x G [...]
-
Seite 192
FONT AND CODE SET TABLES Table A-21. Code Page 297—French 4x 5x 6x 7x 8x 9x Ax Bx Cx Dx Ex Fx x0 (SP) & - ø Ø [ ` ¢ é è ç 0 x1 (RSP) { / É a j ¨ # A J (NSP) 1 x2 âê Â Ê bk s ¥ B K S2 x3 äë Ä Ë c l t • C L T 3 x4 @} À Èdmu ƒ DM U 4 x5 áí Á Íe n v] E N V 5 x6 ãî Ã Î f o w ¶ F O W 6 x7 åï Å Ï g p x G P X 7 x8 [...]
-
Seite 193
FONT AND CODE SET TABLES Table A-22. Code Page 500—Multinational 4x 5x 6x 7x 8x 9x Ax Bx Cx Dx Ex Fx x0 (SP) & - ø Ø ° µ ¢{ } 0 x1 (RSP) é / É a j ~ £ A J (NSP) 1 x2 âê Â Ê b k s¥ B K S2 x3 äë Ä Ë c l t • C L T 3 x4 à è À Èdmu ƒ DM U 4 x5 áí Á Íe n v § E N V 5 x6 ãî Ã Î f o w ¶ F O W 6 x7 åï Å Ïg p x G [...]
-
Seite 194
FONT AND CODE SET TABLES Table A-23. APL character assignment in EBCDIC-SNA mode A-24 XEROX MRP FAMILY COAX COMMAND REFERENCE[...]
-
Seite 195
FONT AND CODE SET TABLES Table A-24. DSC code page EBCDIC-DSC modes 0x 1x 2x 3x 4x 5x 6x 7x 8x 9x Ax Bx x0 NUL (SP) 0 & à ä À Ä a q A Q x1 EM = 1 ¯ è ë È Ë b r B R x2 F F ' 2 .ìïÌÏ c s C S x3 N L ” 3 ,ò ö Ò Ö dtD T x4 /4 :ù ü Ù Ü e u E U x5 CR 5 + ã â à  f v F V x6 |6 ¬ õ êÕÊ gwG W x7 ¦ 7 _ îYÎ h x H X[...]
-
Seite 196
FONT AND CODE SET TABLES Table A-25. DSC APL character assignment An unsupported character prints as a white plus sign in a black box (reverse video effect). A-26 XEROX MRP FAMILY COAX COMMAND REFERENCE[...]
-
Seite 197
FONT AND CODE SET TABLES Table A-26. APL character assignment EBCDIC-DSC An unsupported character prints as a white plus sign in a black box (reverse video effect). XEROX MRP FAMILY COAX COMMAND REFERENCE A-27[...]
-
Seite 198
FONT AND CODE SET TABLES Table A-27. IBM DSC to Xerox DSC translate table EBCDIC- DSC mode 0x 1x 2x 3x 4x 5x 6x 7x 8x 9x Ax Bx x0 40 40 F0 50 57 75 9E B7 81 98 C1 D8[...]
-
Seite 199
B. DSC option defaults This appendix contains a table showing the default DSC options for the IBM printers emulated and also for the Xerox MRP Family coax printers. For full details of each command, refer to the “DSC and SCS data stream commands” chapter in this manual. Refer to the “IBM publications” section in the “Introduction” chapt[...]
-
Seite 200
DSC OPTION DEFAULTS Table B-1. IBM printer DSC option defaults DSC option 3262 default setting 3268/ default setting 3287/ 4214 default setting 3812/16 4028 default setting 4245 default setting 6262 default setting 4220/4219/ 4215/MRP coax default settings CR @ MPP + 1 personalized First print position next line * * * on First print position, curre[...]
-
Seite 201
C. Command summary This appendix contains tables of the special feature commands and a table of the IBM data stream commands available with your Xerox MRP Family coax printers. For full details of each command, see the “DSC and SCS data stream commands” chapter in this manual. Table C-1. DSC Commands Name Code Carriage Return (CR) 05 End of Mes[...]
-
Seite 202
COMMAND SUMMARY Table C-2. SCS commands Name Code Backspace (BS) 16 Bell (BEL) 2F Carriage Return (CR) 0D Enable Print (ENP) 14 Form Feed (FF) 0C Graphic Escape (GE) 08gg Horizontal Tab (HT) 05 Inhibit Print (INP) 24 Interchange Record Separator (IRS) 1E Line Feed (LF) 25 New Line (NL) 15 Null (NUL) 00 Page Presentation Media (PPM) 2BD2nn48xxxxxxsd[...]
-
Seite 203
COMMAND SUMMARY Table C-3. FSL commands Description of feature Command Default ESC—Special Paired Hex Transparent @<Hex>@<Hex> . . .@<Hex> None ESC-ESC—Multiple Paired Hex Transparent @@<Hex><Hex> . . .<Hex>@ None T1—Offline Hex Dump (PCIA Dump) @T1 None T2—Online Hex Dump @T2 None T3—Online ASCII Hex D[...]
-
Seite 204
COMMAND SUMMARY Table C-3. FSL commands (continued) Description of feature Command Default Y10—Set Page Format @Y10, < n 1>, { n 2}@ n1 =0 n2 = 2 Y11—Set Default Paper Path @Y11, < n 1>, { n 2}@ n1 =1 n2 = 2 Y12—Set Default Paper Size @Y12, n 1 [, n 2]@ n1 =3 (U.S.) n1 =1 (EUR) n2 = all trays Y13—Set Wrap/Cut Option at Physical [...]
-
Seite 205
COMMAND SUMMARY Table C-3. FSL commands (continued) Description of feature Command Default Y46—Set IRQ Timer @Y46, n 1 [, n 2] [, n 3]@ n1 = 12 (1 minute) n2 = 120 (10 minutes) n3 = 120 (10 minutes) Y47—ESC-Mode Selection @Y47, n @ or @@!asciiascii@ n = 1 Y48—Set Permanent Escape @Y48, ‘ n 1’@ or @Y48,< xx> @ xx = 0 Y49—Restrict A[...]
-
Seite 206
COMMAND SUMMARY Table C-3. FSL commands (continued) Description of feature Command Default Y88—Define Page Offset @Y88 < n 1>, < n 2> {, n 3}@ n1 = 0 n 2 = 0 n 3 = None Y89—Enable Page Offset @Y89, n 1 {, n 2}@ n1 = 0 Y90—Define User Escape String @Y90, < n 1>, < n 2>@ None Y91—GFID/Font Select Setup @Y91, n 1, n 2, [...]
-
Seite 207
D. Coax communications buffer This appendix describes a memory area known as the communications buffer that is used by all coax emulations. Communications buffer The communications buffer (figure D-1) contains a character buffer and an extended attribute buffer. Each of these buffers contains 4KB of storage. The first 80 bytes of the character buff[...]
-
Seite 208
COAX COMMUNICATIONS BUFFER Printer Output Area The Printer Output Area (POA) that occupies locations X'0000' to X'000F' of the Printer Communications Interface Area (PCIA) contains information regarding printer status and configuration. The POA is written by the printer and read by the cluster controller. Table D-2. Printer outp[...]
-
Seite 209
COAX COMMUNICATIONS BUFFER Table D-2. Printer output area (continued) Address Function Description X'000A' Printer Features Bit 0 Bit 1 Bit 2 Bit 3 Bit 4 Bit 5 Bit 6 Bit 7 1—Highlight supported. (Dependent on FSL Y38) 1—Reverse video supported (not implemented) 1—Blink supported (not implemented) 0—Translate table required. (Depen[...]
-
Seite 210
COAX COMMUNICATIONS BUFFER Control Unit Output Area The Control Unit Output Area (CUOA) that occupies locations X'0010' to X'004F' of the PCIA contains information regarding orders from the control unit and configuration information. The CUOA is written by the cluster controller and read by the printer. Table D-3. Control unit o[...]
-
Seite 211
COAX COMMUNICATIONS BUFFER Table D-3. Control unit output area (continued) Address Function Description X'0017' Order Parameters Abort System Status Available SCS Mode Print Processing Order Parameters Non-LU1 Mode Print Bit 0—7 Code X'00' Code X'02' Code X'03' Bit 0 Bit 1 Bit 2 Bit 3 Bit 4—6 Bit 7 Bit 0 [...]
-
Seite 212
COAX COMMUNICATIONS BUFFER Table D-3. Control unit output area (continued) Address Function Description X'0017' (cont.) DSC Query Load Translate Table Load Structured Field bits 0—7 Bits 0—7 Bits 0—7 Ignored Ignored Ignored X'0018' Maximum Print Position This byte specifies the maximum print position for 3270 DSC mode. If [...]
-
Seite 213
COAX COMMUNICATIONS BUFFER Orders Orders accepted by the Xerox MRP Family coax printers are operations that control printing and mode changing. The PCIA bytes X'0016'—X'0017' specify the type of order the printer is required to perform. The first byte (X'0016') contains the order and the second byte (X'0017&apos[...]
-
Seite 214
COAX COMMUNICATIONS BUFFER In the SCS mode, if ML defines a position beyond the end of the buffer, data wraps from the end of the buffer back to address (X'0050') which is the beginning of the data area. In the DSC mode, if ML extends beyond the end of the buffer, printing stops at the end of the buffer. An End of Message (EM) control cod[...]
-
Seite 215
COAX COMMUNICATIONS BUFFER Table D-4. Field attribute (FA) character definitions Bit Value Description 0,1 11 Field attribute identifier 2,3,4,5 XX11 Nonprint field XX10 Print field XX01 Print field XX00 Print field 6,7 00 Reserved If the first character in a print order is not an attribute character, the attribute of the first field is determined [...]
-
Seite 216
COAX COMMUNICATIONS BUFFER If the EAB modifies a character byte in the base buffer, it is a character attribute (CA). See table D-6. Table D-6. Character attribute (CA)[...]
-
Seite 217
E. IBM GFID to PCL fonts attribute Table E-1 shows PCL fonts and their corresponding IBM GFIDs. Refer to the “Font support and selection” chapter in this manual for detailed explanation of fonts, character sets, and Global Font Identifiers (GFIDs). Table E-1. PCL fonts and equivalent IBM GFIDs Font name IBM GFID Typeface Symbol Set Point Size O[...]
-
Seite 218
IBM GFID TO PCL FONTS ATTRIBUTE Table E-1. PCL fonts and equivalent IBM GFIDs (continued) Font name IBM GFID Typeface Symbol Set Point Size Courier Italic 95 3 Roman 8 10 Letter Gothic Italic 109 6 Roman 8 12 Letter Gothic Bold 110 6 Roman 8 12 Prestige Bold 111 8 Roman 8 10 Prestige Italic 112 8 Roman 8 10 Courier Bold 115 3 Roman 8 10 Courier Ita[...]
-
Seite 219
IBM GFID TO PCL FONTS ATTRIBUTE equivalent IBM GFIDs Font name IBM GFID Typeface Symbol Set Point Size Swiss 721 Italic 813 4 Roman 8 8 Swiss 721 Medium 814 4 ASCII 8 Swiss 721 Bold 815 4 ASCII 8 Dutch 601 Medium 1001 5 Roman 8 10 Dutch 601 Bold 1002 5 Roman 8 10 Dutch 601 Italic 1003 5 Roman 8 10 Dutch 601 Medium 1004 5 ASCII 10 Dutch 601 Bold 100[...]
-
Seite 220
IBM GFID TO PCL FONTS ATTRIBUTE Table E-1. PCL fonts and equivalent IBM GFIDs Font name IBM GFID Typeface Symbol Set Point Size Dutch 601 Bold 1405 5 ASCII 14 Swiss 721 Medium 1411 4 Roman 8 14 Swiss 721 Bold 1412 4 Roman 8 14 Swiss 721 Italic 1413 4 Roman 8 14 Swiss 721 Bold 1415 4 ASCII 14 Dutch 601 Bold 1801 5 Roman 8 18 Swiss 721 Bold 1811 4 Ro[...]
-
Seite 221
F. Helpful hints Setting Function Selection via Line (FSL) to match emulated IBM printers Some of the IBM printers the coax interface is emulating are subsets of other IBM printers. It is recommended, therefore, to set the Function Selection via line (FSL) functions to restrict the support on the interface to match the emulated IBM printers. Table [...]
-
Seite 222
HELPFUL HINTS These PCL fonts can be downloaded to the printer by the Configuration and Resource Utility. Additional notes There is no equivalent of the XES <ESC>+1fontname<CR><LF> functionality when printing IBM data streams. Access to fonts must be made by mapping IBM font calls to the new PCL fonts. Printing a separator page be[...]
-
Seite 223
HELPFUL HINTS To resolve the problem, set the Communications Priority Scheme for the twinax/coax interface on the printer to anything other than Sequential (which is the default). Other valid options are Priority, SequentialLock, or PriorityLock. Any of these settings will ensure that the printer will not look at the next port until after the coax [...]
-
Seite 224
[...]
-
Seite 225
G. Query replies The tables in this appendix describe the query replies available on the interface. These replies are the same for all printer emulations. Differences are restricted only in the support of the Printer Communication Interface Area (PCIA). The restrictions are setup using FSL Y1—Set IBM Buffer Size, FSL Y14—Enable Graphic Option ([...]
-
Seite 226
QUERY REPLIES Table G-2 shows non-SCS query reply summary without IPDS module. Table G-2. Summary query reply (Non-SCS without IPDS) Byte Value (Hex) Description 00—01 000A Length of structured field 02 81 Type = Query reply 03 80 Summary query reply 04 80 Summary query supported 05 81 Useable area query supported 06 85 Character Sets query suppo[...]
-
Seite 227
QUERY REPLIES Refer to table G-3 for the useable area query reply. Table G-3. Useable area query reply Byte Value (Hex) Description 00—01 00 17 Length of structured field (00 15 in SCS mode) 02 81 Type = Query reply 03 81 Useable area indicator 04 1F Extended structure field supported Hard copy device No explicit partition addressing 05 00 Variab[...]
-
Seite 228
QUERY REPLIES Refer to table G-4 for the supported character sets reply. Table G-4. Supported Character Sets reply Byte Value (Hex) Description 00—01 00 13 Length of structured field 02 81 Type = Query reply 03 85 Character Sets supported 04 80 Flag 05 00 Reserved 06 0A Default matrix width (10 slices) 07 08 Default matrix height (8 rows) 08—0B[...]
-
Seite 229
QUERY REPLIES Refer to table G-5 for color reply. Table G-5. Color reply Byte Value (Hex) Description 00—01 00 16 Length of structured field 02 81 Type = Query reply 03 86 Color indicator supported 04 40 Monochrome ribbon is loaded. 05 08 Length of color attribute List 06—07 00 F7 First color: Attribute value (Default) Color printed = Neutral ([...]
-
Seite 230
QUERY REPLIES Refer to table G-6 for highlight reply. Table G-6. Highlight reply Byte Value (Hex) Description 00—01 00 0D Length of structured field 02 81 Type = Query reply 03 87 Highlight indicator 04 04 Number of highlight options 05—06 00 F0 First highlight option: Attribute value (Default) Highlight option = Normal 07—08 F1 00 Second hig[...]
-
Seite 231
QUERY REPLIES Refer to table G-8 for save restore reply. Table G-8. Save restore Reply Byte Value (Hex) Description 00—01 00 06 Length of structured field 02 81 Type = Query reply 03 92 Save/Restore indicator 04—05 00 4C FPCB length Refer to table G-9 for data chaining reply. Table G-9. Data chaining reply Byte Value (Hex) Description 00—01 0[...]
-
Seite 232
QUERY REPLIES Refer to table G-11 for device characteristics reply. Table G-11. Device characteristics reply Byte Value (Hex) Description 00—01 00 1E Length of structured field 02 81 Type = Query reply 03 A0 Data characteristics indicator 04—05 00 0D Horizontal dimensional parameter structure length 06—07 FF 01 Horizontal dimensional paramete[...]
-
Seite 233
H. Related publications Related publications The following publications, as well as this manual, are available through the Xerox Documentation and Software Services (XDSS) (U.S. only). For additional details, see “XDSS ordering information” at the back of this manual. N Note: Xerox Canada, Ltd. publications are available through your local sale[...]
-
Seite 234
RELATED PUBLICATIONS Publication U.S. Number International Language Number 4220/MRP, 4230/MRP Installation Planning Guide 720P12701 4219/MRP and 4215/MRP Installation Planning Guide 720P13290 4219/MRP and 4215/MRP Quick Start 720P13070 4219/MRP and 4215/MRP Operator Guide 720P13060 French Spanish German Italian 4220/MRP, 4230/MRP Network Interface [...]
-
Seite 235
RELATED PUBLICATIONS IBM publications The following IBM manuals were used for references: Publication Number IBM 3262 Printer Models 3413 Component Description GA24-3741 IBM 3268 Printer Models 2 & 2c Description GA27-3268 IBM 3816 Page Printer Setup Instructions GA34-2074 IBM 4245 Printer, Models D12 and D20, Information Manual GA33-1586 IBM 6[...]
-
Seite 236
RELATED PUBLICATIONS Rank Xerox documentation numbers Publication U.S number Rank Xerox documentaion numbers Language Number 4220/MRP, 4230/MRP Operator Guide 720P13941 English French Spanish German Italian Portuguese as U.S. number 708P10660 708P10680 708P10670 708P10700 708P10690 4220/MRP, 4230/MRP System Administrator Guide 720P13951 English Fre[...]
-
Seite 237
I . Forms Utility for the coax environment The MRP family of printers has the capability to accept PCL5, Adobe PostScript Level 2, and SCS data stream via coax direct connection. This appendix focuses on merging variable data residing on an IBM Host with PCL forms (macros) using coax connection. The VTAM Printer Support System (VPS - Release 6.1) t[...]
-
Seite 238
FORMS UTILITY FOR THE COAX ENVIRONMENT Below is an example of a VPS Remote Configuration file. ****************************************** * LPA0DT20 - REMOTE 156 FOR XEROX CENTRE * ****************************************** *____________________________* * VTAM DEFINITIONS * *____________________________* LUNAME = LPA0DT20, PRINTER LUNAME ALOGMODE [...]
-
Seite 239
FORMS UTILITY FOR THE COAX ENVIRONMENT 2. Send the file containing the FSL commands by using a JCL file. For example: //JK12345 JOB (XXXX),'FSLY37',MSGLEVEL = (1,1),CLASS = A, // MSGLASS = X,NOTIFY = JK34334 /*JOBPARM LINECT = 0, ROOM = 3231 /*ROUTE PRINT RMT156 // EXEC PGM = IEBGENER //SYSPRINT DD SYSOUT = X //SYSIN DD DUMMY //SYSUT2 DD [...]
-
Seite 240
FORMS UTILITY FOR THE COAX ENVIRONMENT There are PCL commands that cause a conditional page eject. That is, a page is ejected if there is any printable data in the print buffer. A PCL macro will be affected by the following conditional page eject commands: • Reset (EscE) • UEL (Universal Exit Language) (Esc%-12345X) • Flush All Pages (Esc&[...]
-
Seite 241
FORMS UTILITY FOR THE COAX ENVIRONMENT Implementing FormFixC Entering FormFixC Screen From the FormFixC directory, type: C:FORMFIXC>formfixc The FormFixC Utility Menu will appear with these two items: 1) Run FormFixC Utility 2) Change FormFixC Defaults Before running the utility, you need to first change the defaults. Change FormFixC Defaults I[...]
-
Seite 242
FORMS UTILITY FOR THE COAX ENVIRONMENT 3. Press Enter to run the utility on the form listed on the screen. The original file will remain; it will not be deleted. This message will appear on the bottom of the screen: Conversion Complete; Form Name is <form_name>.FIX. Macro ID is <ID#>. 4. Once you have converted all the forms in this sam[...]
-
Seite 243
FORMS UTILITY FOR THE COAX ENVIRONMENT Merging variable data with a single form (macro) Before instructing the printer to start merging variable data with a macro that is already residing in the printer's memory, some setup commands must be sent. The printer must be instructed about the page orientation, page size and paper source if the user [...]
-
Seite 244
FORMS UTILITY FOR THE COAX ENVIRONMENT Once this job is submitted using a JCL, it will merge this variable data with the macro ID #1 that is already residing on the printer. Here is an example of a JCL used to submit the job (VARDATA2) to VPS Remote 156. //JK12345 JOB (XXX),'SENDDAT',MSGLEVEL = (1,1),CLASS = A, // MSGLASS = X,NOTIFY = JK3[...]
-
Seite 245
FORMS UTILITY FOR THE COAX ENVIRONMENT //SYSPRINT DD SYSOUT = X //SYSIN DD DUMMY //SYSUT2 DD SYSOUT = J //SYSUT1 DD DSN = JK12345.EBCDIC.VARDATA2,DISP = SHR Note: SYSOUT=J is used. Merging variable data with different forms (macros) To invoke different forms, the macro call command must be used. The macro call command can be placed anywhere within [...]
-
Seite 246
FORMS UTILITY FOR THE COAX ENVIRONMENT • LINE 130. Switching form orientation As previously mentioned, there are setup commands that must be sent before instructing the printer to start merging variable data with a macro. If the LANDSCAPE orientation is required, the PCL landscape orientation must be issued in addition to the current page setting[...]
-
Seite 247
FORMS UTILITY FOR THE COAX ENVIRONMENT &&??%%%1B266C314F1B266C30451B26663053% &&??%%%1B266634591B266633581B26663153%&&??<SPAC E>Variable data, line 1. LINE 2. LINE 3. LINE 4. LINE 5. LINE 6. LINE 7. • • • &&??%%%1B266C304F1B266C30451B26663053% &&??%%%1B266633591B266633581B26663153%&&?? <[...]
-
Seite 248
[...]
-
Seite 249
Glossary abort Command that prematurely terminates printing of a job or execution of a program. AFP Advanced Function Presentation. An IBM architecture that uses the all-points-addressable concept to print text and images on a printer. algorithm A prescribed set of well-defined, unambiguous rules or processes for the solution of a problem in a fini[...]
-
Seite 250
GLOSSARY GLOSSARY-2 XEROX MRP FAMILY COAX COMMAND REFERENCE binding margin Margin along which a page is to be bound. See long-edge binding and short-edge binding . bit Binary digit. A bit is the most fundamental unit of information a computer can accept. It has two states called “1” (one) and “0” (zero), or “on” and “off,” that are [...]
-
Seite 251
GLOSSARY XEROX MRP FAMILY COAX COMMAND REFERENCE GLOSSARY-3 character set Collection of characters contained in a font. Each character set has been designed for a special purpose. Some sets include all printable characters found on most standard computer keyboards, while others are intended for such applications as math, foreign language typesettin[...]
-
Seite 252
GLOSSARY GLOSSARY-4 XEROX MRP FAMILY COAX COMMAND REFERENCE data monitor Data-analyzing tool that prints the hexadecimal value of all data received. default Preset value programmed into a printer that it uses unless you change the value with the control panel keys or print language commands. See also factory defaults, power-up defaults . default fo[...]
-
Seite 253
GLOSSARY XEROX MRP FAMILY COAX COMMAND REFERENCE GLOSSARY-5 EFA Extended Field Attribute. EFAs, which appear in the Extension Attribute Buffer, modify Field Attributes in the Message Data Storage Area. EFAs control underlining and use of the base/APL character set. embedded commands Control codes within the text of a file. emulate The ability of a [...]
-
Seite 254
GLOSSARY GLOSSARY-6 XEROX MRP FAMILY COAX COMMAND REFERENCE Graphical Data Display Manager (GDDM) Function of the operating system that processes both text and graphics for output on a display, printer, or plotter. GFID Global Font Identifier, a number that references a font. GSM Grams per square meter. Universally accepted unit that expresses the [...]
-
Seite 255
GLOSSARY XEROX MRP FAMILY COAX COMMAND REFERENCE GLOSSARY-7 IPDS Intelligent Printer Data Stream. IBM Systems Application Architecture host-to-printer data stream for advanced function printing subsystems. It provides an interface to all-points addressable (APA) printers that make possible the presentation of pages containing an architecturally unl[...]
-
Seite 256
GLOSSARY GLOSSARY-8 XEROX MRP FAMILY COAX COMMAND REFERENCE LU3 Logical Unit 3. A 3270 data stream (DSC or DSE) device. MB Megabyte. Unit of 1,048,576 bytes. memory Part of a computer system that stores data temporarily or permanently. See NVM . mode One of several alternative conditions or states of a device, such as Print mode and Configuration m[...]
-
Seite 257
GLOSSARY XEROX MRP FAMILY COAX COMMAND REFERENCE GLOSSARY-9 OEM Original Equipment Manufacturer. A company or organization that purchases computer and peripheral equipment for use as components in products and equipment that they subsequently sell to their customers. offline State in which the printer is under the control of the user, not the host [...]
-
Seite 258
GLOSSARY GLOSSARY-10 XEROX MRP FAMILY COAX COMMAND REFERENCE PDL Page Description Language. Language used to describe printing jobs to a Laser Printing System (LPS). PDL describes the input (type, format, characteristics), performs the processing functions (logical processing), and describes the output (type format, font selection, accounting optio[...]
-
Seite 259
GLOSSARY XEROX MRP FAMILY COAX COMMAND REFERENCE GLOSSARY-11 resident fonts Fonts resident in the printer when shipped. Also called internal fonts. ROM Read Only Memory. Memory used by a micro processor that can only be read. It cannot be rewritten. scalable font Font scaled within the printer to any point size. scan line Individual scan of the las[...]
-
Seite 260
GLOSSARY GLOSSARY-12 XEROX MRP FAMILY COAX COMMAND REFERENCE symbol set Collection of characters contained in a font designed for a special purpose. Some sets include all printable characters found on most standard computer keyboards, while others are intended for such applications as math, foreign language typesetting, and law. system reset Reinit[...]
-
Seite 261
Index Numerals 037—U.S. English, code page, A-10t 273—Austrian German, code page, A-11t 274—Belgian, code page, A-12t 275—Brazilian, code page, A-13t 276—French Canadian, code page, A-14t 277—Danish/Norwegian, code page, A-15t 278—Finnish/Swedish, code page, A-16t 280—Italian, code page, A-17t 281—Japanese (Latin characters), code[...]
-
Seite 262
INDEX i = ILLUSTRATION; t = TABLE 2-8, 3-28i, 3-36t, C-1t, C-2t, GLOSSARY-2 Case, Set, 3-6t, 3-16, C-3t CAUTION, iii, xix certification, approvals, viii Change Configuration Description, 7-21 to 7-23 changing configuration description, 7-24 Channel Select (VCS), Vertical, 2-5t, 2-7t, 2-19, 2-20 to 2-21, 3-36t, C-2t character, GLOSSARY-2 assignment [...]
-
Seite 263
i = ILLUSTRATION; t = TABLE INDEX 3-65, C-4t Y13—Set Wrap/Cut Option at Physical Paper Size, 3-6t, 3-23, 3-65, 3-69, C-4t Y14—Enable Graphic Option, 3-6t, 3-24, C-4t, D-3t, F-1t, G-1 Y19—Set Simplex / Duplex, 3-6t, 3-24 to 3-25, 3-65, C-4t Y25—FF Before Local Copy, 3-6t, 3-25 to 3-26, B-2t, C-4t Y26—FF After Local Copy, 3-7t, 3-26, 3-31, [...]
-
Seite 264
INDEX i = ILLUSTRATION; t = TABLE conventions, xix to xxi personal computer (PC), xxi text, xix to xx COR, 3-19, 3-46, 3-66, 4-5 to 4-7 font mapping, 4-7t, GLOSSARY-3 selecting fonts, 4-6 CPI, 2-14, 2-17, 3-6t, 3-14, 3-19, 3-35, 3-45 to 3-47, 3-48 to 3-52, 3-68, 4-4t, 4-6t, G-8t, GLOSSARY-3 CR and SP to Same Position, Suppress, 3-7t CR at MPP +1, N[...]
-
Seite 265
i = ILLUSTRATION; t = TABLE INDEX expansion, 3-43 Extended Attribute Buffer, see EAB field attribute, see EFA ID, 3-37, D-3t Order, D-6t Status, D-2t F FA, D-9t, GLOSSARY-5 factory default, 3-8t, GLOSSARY-5 area, 3-1 restore settings, 3-5t, 3-12 FCC rules and regulations, iii features, common command, 3-8 communication (Query, EAB), IBM, 3-6t FSL, [...]
-
Seite 266
INDEX i = ILLUSTRATION; t = TABLE helpful hints, 3-37, F-1 hexadecimal (HEX), 3-10, GLOSSARY-6 Dump, 1-3, 3-5t, 3-10, GLOSSARY-6 Online, 3-5t, 3-10 highlight reply, G-6t supported, D-3t HMI, 3-51, 4-6 Horizontal Format (SHF), Set, 2-5t, 2-7t, 2-14 to 2-15, 3-35t, 3-68 Motion Index, see HMI Tab (HT), 2-5t, 2-7t, 2-9, 2-19, 3-36t, C-2t hosts supporte[...]
-
Seite 267
i = ILLUSTRATION; t = TABLE INDEX Lists Configuration Description, 7-1 to 7-12 FSL functions, 3-5t to 3-8t loading, 7-10 of resources, 7-9 Load Structured Field, D-6t Translate Table, D-6t, D-7 loading configuration descriptions, 7-24 emulation fonts to the printer, 7-2 fonts, 7-7 to 7-8, 7-25 local non-SNA 3270 terminal and printer, 6-4 SNA 3270 t[...]
-
Seite 268
INDEX i = ILLUSTRATION; t = TABLE ASCII Hex Dump, 3-5t, 3-10, GLOSSARY-1 Hex Dump, 3-5t, 3-10, 3-64, C-3t operational safety, vi to ix Order, D-4t, D-7 Parameters, D-5t processing DSC print, D-8 to D-10t SCS, D-10 orientation, 3-50 page algorithm, 3-57, 3-66 to 3-69 support, 3-8t Original Equipment Manufacturer reply, see OEM reply output area, pri[...]
-
Seite 269
i = ILLUSTRATION; t = TABLE INDEX Character Set, 3-5t, 3-11, C-3t Settings, 3-5t, 3-10, 3-64, C-3t procedure conventions, xx to xxi personal computer (PC), xix Program Attention, see PA1 and PA2 programmed symbols, 1-2 proportionally spaced fonts, see PS fonts Proportional Spaced Mode, see PSM PS characteristics, 3-24, D-3t fonts, 4-1, 4-4, GLOSSAR[...]
-
Seite 270
INDEX i = ILLUSTRATION; t = TABLE selecting COR fonts, 4-6 semicolon, 3-4, 3-8t, 3-54, 3-56 sending of user strings, 3-5 Send User-defined String, 3-8t, 3-48, 3-65, C-6t Sense Data, D-2t sequence, escape, 3-4 Set Attribute (SA), 2-5t, 2-7t, 2-12, 3-36t, C-2t, D-4t Case, 3-6t, 3-16, C-3t Default CPI, 3-6t, 3-14, 3-45 to 3-46, C-3t Line Spacing (sing[...]
-
Seite 271
i = ILLUSTRATION; t = TABLE INDEX temporary FSL escape character, 3-4 memory area, 3-1 test print sample configuration sheet, 1-7 to 1-8i button, 1-6i LED, 1-6i Message, D-6t text conventions, xix to xx time sharing option, see TSO TOF, 3-15 top of form, see TOF trailing escape character, 3-8t Translate Table APL, 3-7t Reset, 3-7t Load, D-6t Transp[...]
-
Seite 272
INDEX i = ILLUSTRATION; t = TABLE Y12—Set Default Paper Size, 3-6t, 3-22 to 3-23, 3-65, C-4t Y13—Set Wrap/Cut Option at Physical Paper Size, 3-6t, 3-23, 3-65, 3-69, C-4t Y14—Enable Graphic Option, 3-6t, 3-24, C-4t, D-3t, F-1t, G-1 Y19—Set Simplex / Duplex, 3-6t, 3-24 to 3-25, 3-65, C-4t Y25—FF Before Local Copy, 3-6t, 3-25 to 3-26, B-2t, [...]
-
Seite 273
(11/94) Alternate Media Order Card Please send me the Xerox 42xx/MRP Coax Utility Option Kit - 9-track 1/2“ computer tape on reel P/N 673S00006A (CHG# 0435-8984) Name Title Phone Company Department Address City State Zip[...]
-
Seite 274
(11/94) Xerox Corporation 701 S. Aviation Blvd C/O: Software Library, ESM4-015 El Segundo, CA 90245 Postage will be paid by addressee BUSINESS REPLY MAIL FIRST CLASS MAIL PERMIT NO. 229 EL SEGUNDO, CA NO POSTAGE NECESSARY IF MAILED IN THE UNITED STATES C U T O N D O T T E D L I N E S[...]