Xerox DocuPrint 180 IPS Bedienungsanleitung

Xero x Do cuPr in t 96/ 4635 / 180 I PS Installation Planning Guide Version 7.1 2000 721P8823 0[...]

Xerox Corporation 701 South Aviation Boulevard El Segu ndo, CA 90245 2000 by Xerox Corporation. All rights reserved. Copyright protection claimed includes all forms and matters of copyrightable mate rial and i nformation now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the s oftw[...]

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE iii La ser safe ty ! Warning: Adjustmen ts, use of cont rols, or performance of procedures other than those specified herein m ay result in hazardous light exposure. The Xerox Doc uPrint printers are certified to comply with the performance standards of the U.S. Departme nt of Health, Educ[...]

iv XEROX DOCUPRI NT 96/ 4635/180 IPS INSTALLATIO N PLANNING GUIDE • Alway s use mater ials and supplies specifically design ed f or your X ero x equipmen t. Use of unsuitab le mat eria ls ma y resul t i n poor performance and may create a ha zardous sit uation. • Ne ver mov e eit her the printer or the printer controlle r without first cont act[...]

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE v T able of Contents Laser safety iii Ozone informati on iii Opera tion s af ety iii Intr od ucti on xi About t his guide xi Contents xi Conventions xii Notice xi i 1. Pr odu ct ov er vi e w 1-1 System ov erview 1-1 System c ompone nts 1-3 System f eatures 1-4 NPS/IPS Dual Mode 1-6 MICR pr[...]

TABLE O F CONT ENTS vi XEROX DOCUPRI NT 96/ 4635/180 IPS INSTALLATIO N PLANNING GUIDE Installation p lanning che cklist 4-4 Connectivity requi rements 4-7 Ethernet specifications 4-7 Token Rin g speci fications 4-7 Channel-attached spec ifications 4-7 5. Con tro ller s p eci ficati on s and r eq uir em ents 5-1 Power req uirements 5-1 Outlet con fi[...]

TABL E OF CONTENT S XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE v ii 8. Insta lla tion 8-1 I ns tal l a t io n pr oc es s 8- 1 Your respon sibilities 8-2 Defining the IPS pri nter to t he hos t 8-3 So ftwar e lic ens in g 8-3 Ongoing ma intenance 8-4 Routine maintenance 8-4 Meter readin g and rep orting 8-4 A. Supp lie s A-1 Paper a[...]

TABLE O F CONT ENTS viii XEROX DOCUPRI NT 96/ 4635/180 IPS INSTALLATIO N PLANNING GUIDE VM s amp le d efin ition s D-6 VSE sample definitions D-6 E. Def ini ng the prin te r to th e ho st : T CP/IP att ac hm en t E-1 MVS or OS/390 parameters E-1 Software prerequisites – MVS E-1 Network conf igurations – MV S E- 2 Configuration steps – MV S E-[...]

TABL E OF CONTENT S XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE ix References – OS/2 E- 35 Gloss ar y GL OSSARY- 1 Inde x INDEX-1[...]

TABLE O F CONT ENTS x XEROX DOCUPRI NT 96/ 4635/180 IP S INST ALLATION PLANNING GUIDE[...]

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE xi Intr oduction Thi s Xerox P rinting S ystems I nstallation Plann ing Guid e h elps yo u prepare fo r delivery and in stallation of your n ew Xerox DocuPrint printing system. Ab out th is gu id e This guide is intended for the person res ponsible for c oordinating the installation of t h[...]

INTRO DU CTIO N xii XEROX DOCUPRI NT 96/ 4635/180 IP S INST ALLATION PLANNING GUIDE • Appen dix A, "Supplies," des cribes how t o select, s tore, and use supplies for the Do cuPrint pr inting system. It also provides a list of consumable supplies you can order . • Appen dix B, "Xerox supp or t ser vices, " e xplains how t o [...]

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 1-1 1. 1 Pr odu ct o verview This chapter provides an overview of the features and functions of the following Xerox DocuPrint IPDS Pr inting Systems (IPS): • 96 IPS • 96 MICR IPS • 4635 I PS • 4635 M ICR IP S • 180 I PS • 180 M ICR IPS Syst em ove r vi ew The Xerox DocuPrint IP[...]

PRODUCT OVE RVIEW 1-2 XEROX DOCUPRI NT 96/ 4635/180 IP S INST ALLATION PLANNING GUIDE Host connectivity options The DocuPrint IPS can be set up to receive data from the I BM hos t in one of two ways: • Through a bus and tag channel connection. Note: If your system will b e channel-att ach ed, the print er controller requires an additional compo n[...]

PRO DUCT O V ER V I E W XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 1-3 F i gu r e 1- 2. 96/4635/180 I PS: TCP/IP configuration 1 Host system (PC or mainframe) 2 Tok en Ri ng o r E the rnet net w ork co nne ctio n 3 S un workstati on contro ller 4 Printer interface cab le (DCI M2) 5 96, 46 35, or 180 I PS pr inter For information on[...]

PRODUCT OVE RVIEW 1-4 XEROX DOCUPRI NT 96/ 4635/180 IP S INST ALLATION PLANNING GUIDE Syst em fe atures The 96/4635 /180 IPS provides numerous features that can be enabled or conf igured usin g the graphical us er interfa ce on the printer controller. • M ul tip le in put tra ys — Multiple feeder tr a ys can be conf igured to f eed paper f or j[...]

PRO DUCT O V ER V I E W XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 1-5 The DP 96, DP4635 and DP180 IPS can a lso pr int on pa pers as small as 7 by 10 inches / 178 by 254 mm, with the option al 7 b y 10-inch kit. They process paper weights from 16-pound / 60 gsm to 110-poun d / 200 gsm. Jobs also can be print ed on label stock, tra[...]

PRODUCT OVE RVIEW 1-6 XEROX DOCUPRI NT 96/ 4635/180 IP S INST ALLATION PLANNING GUIDE • Mul ti ple h i gh -c a pac i t y ou t p ut bi ns — E ach output bin has offsetting capabil ity and a c apacit y of 2500 sheets of 20-pound or 80 gsm bond. Note: T his cap acity does not apply t o 11 b y 17-in ch and A3 papers. B ecause of the additional weig[...]

PRO DUCT O V ER V I E W XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 1-7 MIC R p ri n tin g fe a tur es The DocuP rint 96 MICR, 4635 M ICR, and 180 M ICR IPS produce a Magnetic I nk C haracter Recogni tion (MIC R) line o n ne gotiable and turnaround document s such as checks and bills. The MICR printing systems print document s using[...]

PRODUCT OVE RVIEW 1-8 XEROX DOCUPRI NT 96/ 4635/180 IP S INST ALLATION PLANNING GUIDE MICR fonts Xerox provides a set of 300 d pi E13B and CM C7 MICR f onts for use with you r 96/4635 /180 M ICR IPS. T o receive the high prin t quali ty guaranteed by Xe rox, you must use these MICR fonts. E13B fonts: The E13B font series includes the following: •[...]

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 2-1 2. 2 Contr oller compone nts a nd options The printer controller provides the printer with print data and command s, and receiv es s tatus inf or mation from the pr inter . This chapter describes the compon ents and options available for the controller. Cont r oller h ardware The print[...]

CONTROLLER COM PONENTS AND OP TIONS 2-2 XEROX DOCUPRI NT 96/ 4635/180 IP S INST ALLATION PLANNING GUIDE F i gu r e 2- 1. Compon ents of the Sun Ultra 2 workstation 1 Proce ssor 2 M on i t o r 3 Mous e and mou se pad 4 Keyb oard 5 Di ske tt e dr iv e 6 CD-ROM drive Processo r The 256 M B RA M process or is the central p rocessing un it of the S un w[...]

CONTROLLER COMPONENTS AND OPTIONS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 2-3 • CD-ROM drive: The CD-R OM dr iv e is a high density , read-only , optical laser storage de vice used f or loading the IPS operating system and other fi les. The CD-R OM dr iv e is located in t he processor above the disket te drive. • Car tri dg [...]

CONTROLLER COM PONENTS AND OP TIONS 2-4 XEROX DOCUPRI NT 96/ 4635/180 IP S INST ALLATION PLANNING GUIDE Keyboard The keyboard consist s of alphanumeric k eys similar t o a typewriter, symbols and s pecial character keys , an extended c haracter set, and function keys. The keyboa rd i s one of your main methods of communi cating with the printer. Yo[...]

CONTROLLER COMPONENTS AND OPTIONS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 2-5 F i gu r e 2- 3. Compon ents of the Sun Ultra 60 workstation 1 Monitor 2 Keyb oard 3 M ou se 4 Pr o c es s o r 5 Di ske tt e dr iv e 6 CD-ROM drive 7 Cartri dg e t a pe driv e Processo r The 256 M B RA M process or is the central p rocessing un it of t[...]

CONTROLLER COM PONENTS AND OP TIONS 2-6 XEROX DOCUPRI NT 96/ 4635/180 IP S INST ALLATION PLANNING GUIDE • Ca rtr i d ge t a pe dr i ve : A 4 GB external SCSI quarter inch cartridge (QIC) tape drive is an external device provided with the printing system. The cartridge tape drive connects to the controller through the SCSI port on the processor ba[...]

CONTROLLER COMPONENTS AND OPTIONS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 2-7 F i gu r e 2- 5. Back pa nel o f the S un U ltra 60 processo r 1 Power inlet 2 F a n ven t 3 Online int erface (if co nfi gure d) 4 Differ enti al SC SI PW B (opt iona l) 5 Printer connecto r (PCI66 1) 6 Moni tor c onn ec tor 7 Aud io c onn ec tor s (4[...]

CONTROLLER COM PONENTS AND OP TIONS 2-8 XEROX DOCUPRI NT 96/ 4635/180 IP S INST ALLATION PLANNING GUIDE Mous e The mous e is an other m ain m ethod o f comm unicating wi th the printer. The mouse has three buttons. The left and ri ght buttons are used to select IP S functions. The center button provides additional function s that you will not be re[...]

CONTROLLER COMPONENTS AND OPTIONS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 2-9 F i gu r e 2- 6. IPS user interface screen The I PS cons ole wind ow displays t he system m essages. The IPS print engine m onitor window m onitors the c urrent printer state and displays me ssages s uch as a broken or jam med printer, pri nter ready, [...]

CONTROLLER COM PONENTS AND OP TIONS 2-10 XEROX DOCUPRI NT 96/ 4635/180 IPS INSTALLATIO N PLANNING GUIDE Ho st Ch annel U nit—c ha nne l-at tac he d sy stems o nl y The Host Channel Unit ( HCU) handles all of the IPDS communi cations and handshak ing with P SF on the host when the IPS is receiving data over a channel. (It is not used when the IPS [...]

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 3-1 3. 3 Printer com ponents a nd options The prin ter processes the elect ronic data and image s receiv ed from the controlle r and produ ces the p rinted repor t. This c hapter describes the com ponents a nd o ptions avai lable f or the printer. Pr inte r comp one nt s The standard 96, 4[...]

PRINTER COMPONENTS AND OPTIONS 3-2 XEROX DOCUPRI NT 96/ 4635/180 IP S INST ALLATION PLANNING GUIDE Refer to the System Overview manual for a det ailed descript ion of the feat ures an d operation of th e printer component s. Pri nte r cont r o l conso le The printer control c onsole is the col or monitor located on top of the printer. It contains m[...]

PRINTER COMPONENTS AND OPTIONS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 3-3 F i gu r e 3- 2. Prin ter con trol cons ol e 1 Lan gua ge i con 2 P rin t er ico n 3 Fau lt Lis t i co n 4 Tool s ico n 5 Gua rde d To ols icon 6 Cl ear b u t t on 7 Con tin ue bu tton 8 S t op button 9 Sample button 10 Brightness con trol thumb wheel 11 [...]

PRINTER COMPONENTS AND OPTIONS 3-4 XEROX DOCUPRI NT 96/ 4635/180 IP S INST ALLATION PLANNING GUIDE Pri nter co nfig ura tions The 96, 4635, a nd 1 80 systems are a vailable i n different b asic configurations, il lustrated bel ow. These c onfiguration opt ions all ow you to custom ize you r Xerox DocuPrint 96 /4635/18 0 printers for increased effic[...]

PRINTER COMPONENTS AND OPTIONS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 3-5 F i gu r e 3- 5. 4635/180 prin ter — Inverter feeder/s tacker + feeder/ stacker + feed er/stacker F i gu r e 3- 6. 4635/180 prin ter — Inverter feeder/s tacker + feeder/ stacker + feed er/stacker + feed er/stacker Note: The bypass transport is not ava[...]

PRINTER COMPONENTS AND OPTIONS 3-6 XEROX DOCUPRI NT 96/ 4635/180 IP S INST ALLATION PLANNING GUIDE Pr in te r op ti o ns The bypass transpo rt and input enablem ent options provide an interface between your DocuPrint system and y our finishing and feeding access ories. However, these feeding and finishi ng options require separate AC and DC power s[...]

PRINTER COMPONENTS AND OPTIONS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 3-7 Bypass tr ansport printer co nfigurations The follo wing 96/4635/ 180 printer configurati ons may h ave t he bypass t ransport: F i gu r e 3- 7. 96 printer w ith inver ter feeder/ stacker + b ypass transport 1 Bypas s transp ort pape r out put l ocati on [...]

PRINTER COMPONENTS AND OPTIONS 3-8 XEROX DOCUPRI NT 96/ 4635/180 IP S INST ALLATION PLANNING GUIDE Inpu t en ablem en t Adding a third-party feeder to your DocuPrin t sy stem is made possible by the input enablem ent option . The DocuPrint 96/4635 printers accept cut sheets from the feedi ng dev ice through an ent ry slot at the lower right side of[...]

PRINTER COMPONENTS AND OPTIONS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 3-9 Co nfi gur at ion s su pp orted The in put enab lement k it and/o r bypass transport a re s upported on the 96 /4635/180 c onfigur ati ons as follows: 96 con figurations Inpu t enablemen t kit an d/or bypass tran sport: • Inv er ter f eeder/stack er onl[...]

PRINTER COMPONENTS AND OPTIONS 3-10 XEROX DOCUPRI NT 96/ 4635/180 IPS INSTALLATIO N PLANNING GUIDE[...]

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 4-1 4. 4 Prepa ring f or installa tion This chapter assists you in prepari ng for the inst allation of your Xerox DocuPrint 96 /4635/18 0 IPS and 96/4635 /180 MIC R IP S. Preparing for installation is a responsibility shared by personnel at your site and Xerox. Your service representatives[...]

PREPA RING F OR IN STALL ATIO N 4-2 XEROX DOCUPRI NT 96/ 4635/180 IP S INST ALLATION PLANNING GUIDE — C reate def ault input and output configurations f or y our system — Obt ain and enable c ustom er ’ s opera ting system s o ftw are license text s tring — Instal l t he DocuPrint syst e m — Install optional S ixth Sense hardware and soft[...]

PREPA RING F OR INST ALLAT ION XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 4-3 — Re vi e w t hi s I n stallation P lanning G uide t h oroughly — H a ve the required parameters defined f o r configuring PSF to print on the IPS. Ref er to the “ Defining the channel attached pri nter to the host ” or the “ Defini ng the print[...]

PREPA RING F OR IN STALL ATIO N 4-4 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION P L ANNING GUI DE Insta lla tio n pl an ning che cklist To aid you in printer installation planning , the following is a checklist that lists th e tasks th at you and your serv i c e represent ative must complete bef ore installation. If you h ave quest ions about [...]

PREPA RING F OR INST ALLAT ION XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 4-5 -2 Inspect and approve site. Xerox ________ Order c onsumabl e sup plies. M inimum supplies needed fo r i ns tallation are: • P aper (2 car ton s) • De veloper (1 c ar ton) or De veloper , MICR (1 car ton) • Fuser agent (2 bo xes) . • Dry ink (1ca[...]

PREPA RING F OR IN STALL ATIO N 4-6 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION P L ANNING GUI DE Obta in and enable customer software license. Ch apter 7 Xerox ________ Pos t- install Becom e familiar wi th support services. Appe ndix B Customer __ ______ Esta blish suppli es maintenan ce proc edure . Appe ndix A Customer __ ______ Provide on[...]

PREPA RING F OR INST ALLAT ION XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 4-7 Connec tiv ity r equirem e nts A Token Ring network or an Ethernet local area network running TCP/IP is the network c ommu nication s ystem that may b e used to transport docum ents from the host to t h e IPS. This is an a lternative to the channel-at tac[...]

PREPA RING F OR IN STALL ATIO N 4-8 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION P L ANNING GUI DE[...]

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 5-1 5. 5 C ontr oller s pecificati ons and requirements This chapt er prov ides power a nd spa ce requ irements for your 96/4635/180 IPS printer controlle r. It a lso provides c ontroller environment al specifications. For facts a bout printer power and space requirement s, r e fer to the [...]

CONTR OLLER SPEC IFICA TIO NS AND REQU IREM ENTS 5-2 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION P L ANNING GUI DE Outle t configu rations This section discusse s specifications for s y stem out lets and the required wall outlet configurations for the USA / Canada and internationally. Note: All power outlets must be dedi cated to this equipmen[...]

CONTROLLER SPECIFICATIONS AND REQUIREMENTS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 5-3 Sp ace r equi rem ents The printer controller c o nsists of the Sun workstation and, for channel-attached systems, t he HCU. Thi s section provides recommend ations for placement of controller hardware component s. For printer com pon ent spac[...]

CONTR OLLER SPEC IFICA TIO NS AND REQU IREM ENTS 5-4 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION P L ANNING GUI DE Sun Ul tra 2 work station placemen t Following are guidelines fo r placement of the Su n Ult r a 2 workstation component s of t he printer co ntroller. F igu re 5-2. S un Ultra 2 printer contro ller hardw are 1 Mous e and mou se p[...]

CONTROLLER SPECIFICATIONS AND REQUIREMENTS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 5-5 Pro cessor cle arance When you place your workstation process or on a tab le top, m ake sure to allow at least 6 inches / 15.2 cm of unobstructed space at the rear and b oth s ides of the processor. Do n ot allow an y pie ce of equipme nt to b[...]

CONTR OLLER SPEC IFICA TIO NS AND REQU IREM ENTS 5-6 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION P L ANNING GUI DE Sun Ul tra 60 wor kstation pl acement Following are guidelines for placement of the Sun Ultra 60 workstation components o f the pri nter controller. F igu re 5-4. S u n Ultra 60 pr inter c ontr oller h ardw are 1 Mous e and mou se[...]

CONTROLLER SPECIFICATIONS AND REQUIREMENTS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 5-7 The fol lowing il lustration sho ws f an and vent l o cations on the front and back of t he controller . F igu re 5-5. Sun Ultra 60 fan a nd vent locations to keep clear 1 Vent in front of processor 2 Fan in back of processo r 3 Vent in back o[...]

CONTR OLLER SPEC IFICA TIO NS AND REQU IREM ENTS 5-8 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION P L ANNING GUI DE HCU placem ent (chan nel-attached sy stems only) The following shows the recommend ed HCU ha rdware placement, for channel-attached s ystems. F igu re 5-6. HC U hardw are (for channel-attached systems ) 1 HCU 2 Table Do not: • D[...]

CONTROLLER SPECIFICATIONS AND REQUIREMENTS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 5-9 Pri nter con tr o ll er ha r dwa re s pe cifica tion s a nd r equi rem ents su mma ry The following table summarizes the specificat ions and electrical requirements of your DocuPrint IPS printer controller hardware component s. For a sum mary [...]

CONTR OLLER SPEC IFICA TIO NS AND REQU IREM ENTS 5-10 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION PLANNING GUIDE Keyboard d =7 . 5 in . / 17 . 8 c m w =18 in. / 45. 7 cm 2 lbs. / 1k g -- - --- 72 in. / 1.8 m Mou se d =3 in. / 8 cm w =4 in. / 1 0 cm h =2 in. / 5 cm 0.3 l bs. / 0.14 kg --- --- 25 i n. / 63 cm T able 5-3. 9 6/4635/ 180 IPS printe[...]

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 6-1 6. 6 Printer s pecificati ons and requirements This chapt er prov ides power a nd spa ce requ irements for your 96/4635/180 printer. I t also provides printer en vironmenta l specifications . For facts about controller powe r an d spac e requirements, refer to the “ Controller s peci[...]

PRINT ER SP ECIF ICATI ONS AND REQU IRE MEN TS 6-2 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION P L ANNING GUI DE Outle t configu rations This section discusse s specifications for s y stem out lets and the required wall outlet configurations for the USA / Canada and internationally. Note: All power outlets must be dedi cated to this equipment.[...]

PRINTER SPE CIFICATI ONS AND R EQUIREMENTS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 6-3 Printer power outlet/cord voltage configu rations — 60 Hz The follow ing figures s hows the 60 Hz power ou tlet c onfiguration for 50 am p NEM A 14-50 R (96, 4635, a nd 1 80) an d 30 am p NEMA 14- 30R (180 only). Voltage to ground is shown f[...]

PRINT ER SP ECIF ICATI ONS AND REQU IRE MEN TS 6-4 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION P L ANNING GUI DE Printer outlet v o ltages — 50 Hz All power outlets must have a dedicated circuit for each system equipme nt piece. M ake sure each power cord has a s ep arate circuit. Note: Consult wit h your service representative to determine [...]

PRINTER SPE CIFICATI ONS AND R EQUIREMENTS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 6-5 The following lists the 5 0 Hz WYE /Star printer outlet i nformation fo r 380 and 400 volts. Printer power outlet/cord voltage configu rations — 50 Hz For 5 0 Hz syst ems outlet /power cord configurat ions, consu lt your local service repres[...]

PRINT ER SP ECIF ICATI ONS AND REQU IRE MEN TS 6-6 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION P L ANNING GUI DE En vir onmen tal spec ifi cat ions When y ou s elect a site location f or yo ur DocuPrint printer, avoid environments with extr e me variations in temperature and other hazards, such as excessive dust or humidity. Recom mended envir[...]

PRINTER SPE CIFICATI ONS AND R EQUIREMENTS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 6-7 Sp ace r equi rem ents You should consider the following factors wh en deciding where to place the printing system hardware c omponen ts: • Adequ ate work space and ser vice clearance around the equipm ent • Proximity t o ele ctrical and n[...]

PRINT ER SP ECIF ICATI ONS AND REQU IRE MEN TS 6-8 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION P L ANNING GUI DE 96 printer with inverter feeder/stacke r onl y The di mensions of the prin ter with the inverter feeder/ stacker-only configuration are as follows: The following il lustrates a top view of the spac e requirem ents for the printer wi[...]

PRINTER SPE CIFICATI ONS AND R EQUIREMENTS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 6-9 96/4635/180 p rinter with inverter feed er/ stacker an d on e fee der/stacke r The di mensions of the prin ter with the inverter feeder/ stacker and feeder/stacker are as follows: The following il lustrates a top view of the spac e requirem en[...]

PRINT ER SP ECIF ICATI ONS AND REQU IRE MEN TS 6-10 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION PLANNING GUIDE 4635/ 180 printer with inverter feed er/ stacker an d two feed er/stacker s The di mensions of the prin ter with the inverter feeder/ stacker, an d two feeder/ stackers are as follows: The following il lustrates a top view of the spac[...]

PRINTER SPE CIFICATI ONS AND R EQUIREMENTS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 6-11 4635/ 180 printer with inverter feed er/ stacker an d three feed er/stacker s The di mensions of the prin ter with the inverter feeder/ stacker and three feeder/s tackers are as fo llows: The following il lustrates a top view of the spac e re[...]

PRINT ER SP ECIF ICATI ONS AND REQU IRE MEN TS 6-12 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION PLANNING GUIDE By pass tran sport spe cif ica tion s The bypas s transport option en ables you to add a third-party finishi ng device to your 96, 4635, or 1 80 printer. The bypass transport is installed by your service representati ve and remains pe[...]

PRINTER SPE CIFICATI ONS AND R EQUIREMENTS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 6-13 Dimens ions The following figure shows the dim ensions of the bypass transport in millim e ter s an d in che s f rom t he rig ht e n d v iew . F igu re 6-7. Bypa ss transp ort di me nsio ns Sheet path Exit guide 17 in / 440 mm Registration ed[...]

PRINT ER SP ECIF ICATI ONS AND REQU IRE MEN TS 6-14 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION PLANNING GUIDE Service acces s The following figure provides space planning in formation and service access requiremen ts for t he bypass transport from a top view. F igu re 6-8. Bypass transp ort space planning diagra m 1 Recom mended third-party f[...]

PRINTER SPE CIFICATI ONS AND R EQUIREMENTS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 6-15 Bypa ss transp ort pap er pa th The foll o wing figure shows the paper path through the bypass transport from a front view. F igu re 6-9. Bypa ss tr ansp ort pap er pa th 1 S heet path 2 Exit ro lls 3 Floo r[...]

PRINT ER SP ECIF ICATI ONS AND REQU IRE MEN TS 6-16 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION PLANNING GUIDE In put en abl eme nt di mensi ons T he following figure shows t he paper path and the dimensions of the input enableme nt area f rom a printer fr o nt view. The input enablem ent kit s upports third-party feeding devices. F igu re 6-1[...]

PRINTER SPE CIFICATI ONS AND R EQUIREMENTS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 6-17 Co nfigur ation diag rams wit h b ypass t ransp ort The following diagrams show the dimension s and space requirements o f the 96, 4635, a nd 1 80 w ith a bypass t ransport. These diag rams rep resent top views of the c ompone nts, surrounded[...]

PRINT ER SP ECIF ICATI ONS AND REQU IRE MEN TS 6-18 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION PLANNING GUIDE F igu re 6-12 . 96/ 4635/180 pr inter — inv erter feeder/s tacker + feeder/stacker con figuration w ith bypass tran sport 1 Back of system 2 In verter 3 Fee der/stacke r 4 Fee der/stacke r 5 Bypa ss transport 6 Front of system 7 Pr [...]

PRINTER SPE CIFICATI ONS AND R EQUIREMENTS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 6-19 F igu re 6-13 . 4635/ 180 printer — inverter feed er/stacker + feede r/ stacker + feed er/stacker configuration with bypas s transport 1 Back of system 2 In verter 3 Fee der/stacke r 4 Fee der/stacke r 5 Fee der/stacke r 6 Bypa ss transport[...]

PRINT ER SP ECIF ICATI ONS AND REQU IRE MEN TS 6-20 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION PLANNING GUIDE Sp ace p lann ing gui deli nes When determinin g your space req uirem ents and planning for shared space between you r pri nt ers, it i s important to consider all of t he component s you plan to install. To ensure all of t he space r[...]

PRINTER SPE CIFICATI ONS AND R EQUIREMENTS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 6-21 4635, 96, or 180 printer f eeders and stackers. Consult with your Xerox representative to ensure all the re quirement s are met. The following figures illustrate t h ree possible configurations of shared space. Back-to-back shared spac e The [...]

PRINT ER SP ECIF ICATI ONS AND REQU IRE MEN TS 6-22 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION PLANNING GUIDE Face-to-face shar ed space The following figure shows the two printers facing each other. The printers share 12 inc hes / 30.5 cm o f the genera l service s pace, but not the exclusive operator area in front of each printer. Therefore[...]

PRINTER SPE CIFICATI ONS AND R EQUIREMENTS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 6-23 Face-to-b ack shared space The following figure shows t he two printers arrange d with one facing the back of the other. Between th em is 60 inches / 1 52.4 c m of s pace. This allows for 2 4 inches / 6 1 cm o f operat or space in front of th[...]

PRINT ER SP ECIF ICATI ONS AND REQU IRE MEN TS 6-24 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION PLANNING GUIDE Floor l eveling For proper operation, the printer m us t be perfectly level. On floors less than two d egrees o ut of leve l, installation pe rson nel use a leveling kit to l ev el the machine. Note: The printer will not function prop[...]

PRINTER SPE CIFICATI ONS AND R EQUIREMENTS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 6-25 T u rn ing radi us You mus t al so consid er the width o f the pa ssageway whe n the equipme nt must nego tiate a corner, whether into a room, a n elevator, or anoth er passage way. There are L-shaped turns and T-shaped turns . The di agrams [...]

PRINT ER SP ECIF ICATI ONS AND REQU IRE MEN TS 6-26 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION PLANNING GUIDE Turni ng radius for pr inte r w ith separated com ponents The 96, 4635 or 180 is delivered with the printer, i nv erter feeder/ stacker, and each f eeder/sta cker as separate modul es. If neces sary, the printer can be sep arated into[...]

PRINTER SPE CIFICATI ONS AND R EQUIREMENTS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 6-27 Turning radius for unseparated printer com ponents The following t able lists the turning requirements for t he printer when attached to the pape r hand ling module (not sep arated ). Turn ing rad ii fo r feeder/s tacker modu le s The followi[...]

PRINT ER SP ECIF ICATI ONS AND REQU IRE MEN TS 6-28 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION PLANNING GUIDE The following table lists t h e turning requirements for the feeder/ sta cker module. Note: These turning figures are base d on i nverter/feeder/stacker dimension s of 28 in ches / 71 .1 cm by 32.2 5 inches / 8 1.9 cm . T able 6-11. T[...]

PRINTER SPE CIFICATI ONS AND R EQUIREMENTS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 6-29 Pr i nte r har dware spec ific ations and re quir e ment s summ ary The following table summarizes the specificat ions and electrical requirements of your printer hardware components. For a s u mmary o f controller h ardware spec if i cations[...]

PRINT ER SP ECIF ICATI ONS AND REQU IRE MEN TS 6-30 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION PLANNING GUIDE 4635/180 pr inter: Inverter feeder / sta cker + two feeder / stackers d =38. 8 in. / 98.6 cm w =183. 5 in./ 466.1cm h =59. 6. in. / 151.3 cm Total space required (+ access): 256.5 in. w by 114 in. d / 648.9 cm w by 290.3 cm d 3,109 l [...]

PRINTER SPE CIFICATI ONS AND R EQUIREMENTS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 6-31 4635/180 pr inter: Inverter feeder / sta cker + three feeder / stackers d =38. 8 in. / 98.6 cm w =216 in. / 730.8 cm h =59. 6 in. / 151.3 c m Total space required (+ access): 287.75 in. w by 114 in. d / 730.8 cm w by 290.3 cm d 3,630 l bs. / [...]

PRINT ER SP ECIF ICATI ONS AND REQU IRE MEN TS 6-32 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION PLANNING GUIDE Sp ace p lann ing temp lat es The dimens ions and space requirement s for your p rinter compone nts are provided earlier i n this chapter. The space planning templates are designed to simplify the space planning process by helping you[...]

PRINTER SPE CIFICATI ONS AND R EQUIREMENTS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 6-33[...]

PRINT ER SP ECIF ICATI ONS AND REQU IRE MEN TS 6-34 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION PLANNING GUIDE[...]

PRINTER SPE CIFICATI ONS AND R EQUIREMENTS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 6-35[...]

PRINT ER SP ECIF ICATI ONS AND REQU IRE MEN TS 6-36 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION PLANNING GUIDE[...]

PRINTER SPE CIFICATI ONS AND R EQUIREMENTS XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 6-37[...]

PRINT ER SP ECIF ICATI ONS AND REQU IRE MEN TS 6-38 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION PLANNING GUIDE[...]

1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 C O D o e d L n e G RI D PATT ERN 1/ 4 i nc h r ep r e sen t s one f oot u t n t t i[...]

[...]

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 7-1 7. 7 Syst em conn ections This chapter provides cable requirement s for your 96/ 4635/180 IPS system. It also provides information abo ut channel-attaching your IPS printer. To ensure all of your cable requir emen ts are m et, it is important to work wi t h your Xerox repre sentative. [...]

SYSTEM CONNECTIONS 7-2 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION P L ANNING GUI DE Cabl e lo catio n s To run the cables beneath the flooring effectively, it is necess ary to know where the cables enter and exit t h e printer. T he following diagrams show those locations (marked with an X). All power cords at tach to t he bac k o f the pri n[...]

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 8-1 8. 8 Installa tion This chapter describes the activities performed by you and Xerox during the installation of the Xe r o x Doc uPrint 9 6/96 M ICR I PS, 4635/4635 MICR IPS, and 180/ 180 MICR IPS, and hardware and software component s. Before installation can begin, you must complete t[...]

INST ALLAT ION 8-2 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION P L ANNING GUI DE Y our resp ons ib ilities Xerox is responsible for t he physical installation of t he printer component s and for load ing the software a nd applications. You have the general s ite responsib ility of ensuring t hat the right personne l, supplies, and network info[...]

INST ALLAT ION XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 8-3 De finin g th e IPS pr inte r to th e hos t Prior to inst a llation of your I P S printer, your ho st system must be configured to commu nicate with and pri nt on the I P S. This requires defining several printer parameters to your host. The requi red information a nd co[...]

INST ALLAT ION 8-4 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION P L ANNING GUI DE On go in g mai n tena nc e After the install at ion of y our Xerox DocuPrint IPS, there are a few ongoing tasks t hat must be perform ed . These task s ma y i nclude the follo win g: • Maintain ing an adequate in ventory of consumable supplies • Overseeing rou[...]

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE A-1 A. A Supplies This appendi x provides inform ation and s pecifications for the m edia you use with your X erox DocuPrint 96, 4635, or 180 printer. Instructions for o rdering supplies are also provided . Consumable supplies (those that are depleted during operation of the syst em ), suc[...]

SUPPLIES A-2 XE ROX DOCUPRINT 96/4635 /180 IPS I NSTALLATION PLANNING GUI DE Use p aper w it h in these param eters: • Lighte st: 16-pound or 65 gsm bond • Heaviest: 110-pound or 200-gsm index. Note: It is recom mended that you use 24-pound pape r with MICR applications, or paper specified by your local banking regulatory authority. Characteris[...]

SUPP LIES XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE A-3 • Perf or ated paper • Pre-cut o r full tabs • Car bon le ss pap er . Note: The 96/4635/180 printer can pri nt on precoll at ed or ordered sto cks, incl u ding ordered tab s. However, jam recovery is not supported with these s tocks. Pa p e r wi dth an d p rin te r pe r[...]

SUPPLIES A-4 XE ROX DOCUPRINT 96/4635 /180 IPS I NSTALLATION PLANNING GUI DE When the printing speed appea rs to degra de, you may be able to improve it by run ning the print job in a hi ghe r pitch mode. Pape r size/ p i tch mode min imum and maximum The illustration s in t his section show the pitch mod es in whi ch you can operate with the small[...]

SUPP LIES XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE A-5 The follo wing figure i llustrates the m aximum and m inimu m paper sizes supported in 8-pitch mode. Fig ure A -1 . 8-pitch mode paper sizes (4635 an d 180 only) 1 Ma ximu m pape r size f or 8 pitc h mod e 2 Mi nimum pape r siz e for 8 pi tch m ode 3 Travel d irection of s he[...]

SUPPLIES A-6 XE ROX DOCUPRINT 96/4635 /180 IPS I NSTALLATION PLANNING GUI DE The follo wing figure i llustrates the m aximum and m inimu m paper sizes supported in 3-pitch mode. Fig ure A -2 . 3-pit ch mod e pap er s izes 1 Ma ximu m pape r size f or 3 pitc h mod e 2 Mi nimum pape r siz e for 3 pi tch m ode 3 Travel d irection of s heets ou t of p [...]

SUPP LIES XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE A-7 Fig ure A -4 . A3 ( 2 97 by 420 mm) paper feeding (sho rt e dge fe ed ) US Papers The following diagrams show how US Letter and US Le dger (or US Tabloid) paper sizes feed through the printer. Fig ure A -5 . US Letter (8 .5 by 11 inch) paper feeding (long ed ge feed ) Fig ure[...]

SUPPLIES A-8 XE ROX DOCUPRINT 96/4635 /180 IPS I NSTALLATION PLANNING GUI DE B4 Papers There are two sizes of B4 paper — European or ISO (9.84 by 13.89 inches / 250 by 3 53 mm) and Jap anese or JIS B4 (14 .33 by 10.12 inches / 364 by 2 57 mm). European B4 feed s long edge first, while JIS B4 feeds either lo ng edge or short edge first. Fig ure A [...]

SUPP LIES XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE A-9 P aper care Once you ha ve purchased your pa per, y ou must be sure it is stored and conditioned properly, so that it performs optimally in t he printer wi th a min imum of ja ms. Sto rin g pap er Paper has a tendency to curl u nder the heat that is present inside xerographic[...]

SUPPLIES A-10 XEROX DOCUP RINT 96/ 4 635/180 IP S INSTALLATION PLANNING GUIDE Figure A-10. Recomm ended temperature and h umidity for pa per storage Con dit ion ing pa per Because temperat ure and humidity affect paper performance in the printer, you need to condition paper before using it. To do this, store paper for a specified l ength of time in[...]

SUPP LIES XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE A-11 Example: ( See the shaded rows i n the table a bove. ) If y ou want to move ten cartons of pape r from a storage area with a temperature of 90 o F to an operating area with a t em perature of 75 o F (a 15 o difference), you should do so at least 14 hours before using the pap[...]

SUPPLIES A-12 XEROX DOCUP RINT 96/ 4 635/180 IP S INSTALLATION PLANNING GUIDE Othe r su pplie s This sec tion des cribes the suppli es other than pa per that are necessary for installation and afterward. Y ou r sales representative will help you pl ace your initial supp ly orde r. Dry ink Dry ink (also c alled toner) is the black powd er which form[...]

SUPP LIES XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE A-13 Use o nly the developer s pecified f or use in your 96, 463 5,or 180 printer. Cautio n : The 96/ 4635/180 MICR printers require a di fferent developer, with a different part number, f r om the developer used in the standard 96/4635/180 printer. Be sure you use only designate[...]

SUPPLIES A-14 XEROX DOCUP RINT 96/ 4 635/180 IP S INSTALLATION PLANNING GUIDE MICR tools You can use the f ollowing to ols to determine w hether the MICR output is printing wi t hin MICR specifications: • MICR P ositioning an d Di mension Gauge. • 8 Po wer (X) Co mparator with M ICR grid. Note: You should us e the C ustom T ransfer Assist Blade[...]

SUPP LIES XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE A-15 Co nsum ab le su pplie s tab les A number of supp lies are avai lable from Xerox f or yo ur DocuPrint printer. Use the f ollowing tables to h elp determine y our supply needs . Note: Customers in th e U. S. may use the part num bers in these tables to order suppl ies. Custom[...]

SUPPLIES A-16 XEROX DOCUP RINT 96/ 4 635/180 IP S INSTALLATION PLANNING GUIDE 8.5 x 11 inch Dual P urpose Colors — Green 3R 3056 8.5 x 11 inch Dual P urpose Colors — Green, 3-hole 3R 3072 8.5 x 14 inch Dual P urpose Colors — Green 3R 3088 8.5 x 11 inch Dual P urpose Colors — Pink 3R 3058 8.5 x 11 inch Dual P urpose Colors — Pink, 3-hole 3[...]

SUPP LIES XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE A-17 9.5 x 11 inch 65-pound divider white 2,500 sheets per carton 3R 3428 11 x 17 i nch 4024 Dual Purpose Paper 2500 sheets per cartons 3R 729 11 x 17 i nch 4024 Dual Purpose Paper, 7-hol e* 2500 sheets per cartons 3R 3074 T able A-5. Stocks list for 96/4635/180 printers (continu[...]

SUPPLIES A-18 XEROX DOCUP RINT 96/ 4 635/180 IP S INSTALLATION PLANNING GUIDE Tran sparenci es Xerox transparencies are pack aged 100 sheets to a box. 8.5 x 11 inch Cl ear, with a whi t e strip on t he edge 3R 2780 8.5 x 11 inch Cl ear, w it h removable strip 3R 3108 8.5 x 11 inch Cl ear, high speed, with paper backing 3R 3028 La bels (Gu mm ed) Xe[...]

SUPP LIES XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE A-19 T able A-6. Carb onless stocks for 96/4635 /180 printers Size Parts Sequ ence Sheets Sheets per carton Sets per carton Cartons pe r pal let Part nu mber 8.5 in. x 11 in. *2 2 2 3 3 4 N/A N/A N/A N/A N/A N/A N/A N/A Reverse/ Straight Straight/ Double Reverse/ Straight Straigh[...]

SUPPLIES A-20 XEROX DOCUP RINT 96/ 4 635/180 IP S INSTALLATION PLANNING GUIDE 8.5 in. x 14 in.* 2 3 N/A N/A N/A N/A Reverse/ Straight Straight N/A N/A N/A N/A Alternating CB-White CF-Canary Alternating CB-White CFB-Canary CF-Pink CB-White CFB-Canary CF-Canary CF-Pink 5000 5010 5000 5000 5000 5000 2500 1670 N/A N/A N/A N/A 30 30 30 30 30 30 3R 4228 [...]

SUPP LIES XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE A-21 Complete supplies list — 96/4635/1 80 printer s The following table lists t h e supplies in addition to paper that a re available for your p rinter. Use this table to hel p you determine your supplies nee ds. T able A-7. Com plete supplies list for 96/4635/180 Ite m Des cr[...]

SUPPLIES A-22 XEROX DOCUP RINT 96/ 4 635/180 IP S INSTALLATION PLANNING GUIDE Orde ri ng su p pl ies To avoid unn ecessary do wntime, alw ays have an ade quate am ount of the necessary supplies. To do this, you need to establish a procedure for checking and ordering s upplies. A supplies chec klist is provided at the end of this c h apter to help y[...]

SUPP LIES XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE A-23 The following table is a checklist you can use t o keep track of the supplies y ou order.[...]

SUPPLIES A-24 XEROX DOCUP RINT 96/ 4 635/180 IP S INSTALLATION PLANNING GUIDE[...]

SUPP LIES XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE A-25 T able A-8. Supplies ch ecklist for 96/4635/180 printer Checklis t: Supplies Use this c heck list to help record the su pplies you req uire, the date on w hich the order sh ould be placed , and the actual date of the order. Item De scription and part number Qu antity Da te t[...]

SUPPLIES A-26 XEROX DOCUP RINT 96/ 4 635/180 IP S INSTALLATION PLANNING GUIDE Fl oppy di s ks Cleanin g supplies T able A-8. Supplies ch ecklist for 96/4635/180 printer Checklis t: Supplies Use this c heck list to help record the su pplies you req uire, the date on w hich the order sh ould be placed , and the actual date of the order. Item De scrip[...]

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE B-1 B. B Xer o x support services Xerox provides many services in support of your l a ser printing system. This appendix conta ins information on the foll o wing serv i ces: • Xerox Customer S erv ice S uppor t Center • Xerox P rinting Systems Custo mer Suppor t Center • Xerox Custom[...]

XEROX SUPPO RT SERV ICES B-2 XE ROX DOCUPRINT 96/4635 /180 IPS I NSTALLATION PLANNING GUI DE Before contacting service, make note of the following: • Status code numbe rs and messages which appear on the keyb o a rd /di s p lay • Status messag es which appear o n the pri nter cont rol conso le • Indicator l ights that are lit. Your cal l is a[...]

XE ROX SUP POR T SE RVICE S XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE B-3 To contact the Xerox Printing Systems Customer Support Cen ter, call: 1-310-33 3-0501 (U. S. o nly), between the hours of 5:00 a.m . and 5:00 p.m., Pacific time. Xe ro x Cu sto mer Docu ment ation C ata log Detailed in formation on docum entation for D ocuPr[...]

XEROX SUPPO RT SERV ICES B-4 XE ROX DOCUPRINT 96/4635 /180 IPS I NSTALLATION PLANNING GUI DE Xero x Cu stom e r Edu cat ion Xerox offe rs classes and t utorial docum ents on various topics relating to pri nting syste ms and document production. For information about X erox training co urses, or to receive a catalo g, call Xerox Cust omer E ducation[...]

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE C-1 C. C R elate d publi cations The Xerox Do cuPrint 96/4635/180 IPS I nstallation P lanning Guide is part of t he Xerox Docu Print IPS Ser ies publication set. Xero x documen ts Following are related Xerox do cuments. F or a complete l ist and description of available Xerox documen tatio[...]

REL ATED PUBL ICATIO NS C-2 XEROX DOCUPRI NT 96/ 4 635/180 I PS INS TALLATION PLANNING GUIDE Atta chment Configuration Handb ook AF P IBM Pri nt S ervi ces Fac ility for OS /2 ES 3090/ 9000 Input/O utput Program Us er’s G uide MVS/ ESA Hard w are Configur ation Def i ni tion IB M AIX Pri nt Serv ices Fac ility/6 000: Prin t A d ministration VM /E[...]

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE D-1 D. D Defining th e channel -attach ed printer to the h ost This appendix contains some ex planations and sample printer parameters for defining a cha nnel-attached IPS pri nter to your host, in each PSF environme nt. MVS pa rameter s This section gives exampl es of p rinter device para[...]

DEFINING THE CHANN EL-ATTACHED PRINTER TO T HE HOST D-2 XEROX DOCUPRI NT 96/ 4 635/180 I PS INS TALLATION PLANNING GUIDE // PIMSG= // DATACK= // BUFNO= // TRACE= // DUMP= //PRT6 ENDCNTL • AFP 1 de finit ion — CTL37E8 CNTLUNIT — CNUMBER=E8,PATH=(37),PROTOCOL=D,SHARED=N, UNIT=AFP1,UNITADD=((E8,1)) — PRT37E8 IODEVICE CUNUMER=1E8 , — UNIT=AFP[...]

DEFINING THE CHANNEL-ATT ACHED PRINTER TO THE HOST XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE D-3 For further i nformat ion on defining your printer, r e fer to the following IBM d ocume ntation. • ES3090/ 9000 I nput/Output Program User ’ s Guide (#GC38- 0095) • Chapter 5, “ How to define, modify , or vie w a configuration[...]

DEFINING THE CHANN EL-ATTACHED PRINTER TO T HE HOST D-4 XEROX DOCUPRI NT 96/ 4 635/180 I PS INS TALLATION PLANNING GUIDE OS/2 procedu res This section gives exampl es of p rinter device paramet ers and definitions for a channel-attached in the OS/2 env ironment using PSF/ 2. To print using PSF/2, you must identify the IPS to the P S F/2 print serve[...]

DEFINING THE CHANNEL-ATT ACHED PRINTER TO THE HOST XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE D-5 9. In the “ For m De fi n iti o n ” fiel d on the Channel A ttachment Settings window , use the def au lt form de stination, unless o ne is define d by the a pplication. 10. On t he Channe l A ttachment Se ttings window , mak e sur[...]

DEFINING THE CHANN EL-ATTACHED PRINTER TO T HE HOST D-6 XEROX DOCUPRI NT 96/ 4 635/180 I PS INS TALLATION PLANNING GUIDE VM s am ple de fin iti ons This sec tion gives an ex ample of p rinter device paramet ers an d definitions for a channel-attached IPS in a mainframe VM environment using PSF/VM. CNTLUNIT CUNMBR=632, PATH=16, PRTOCL=S, SHARED=N, U[...]

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE E-1 E. E Defining the printer to the host: TCP/IP attachm ent This appendix cont ains instructions, prerequisites, an d some sam ple printer p arameters for defining your TCP/IP-attached IPS printer to your host in each supported PSF environment . Note: The IPS does not support TCP/IP in t[...]

DEFINING THE PRINTER TO TH E HOST: TCP/IP ATTACHMENT E-2 XE ROX DOCUPRINT 96/4635 /180 IPS I NSTALLATION PLANNING GUI DE Net wor k configu ration s – MVS The IPS printer i s supported in all the following configuration s, provided that the software prerequisites are installed. • Basic conf iguration in which the M VS host is at tached to a LA N[...]

DEF INING TH E PRINT ER TO THE HOST: TC P/IP ATTAC HMENT XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE E-3 SYS1 .PROCLIB , although your s y stem may use a d iff erent library .) The JES2 PROC has a DD statement (normall y HASPP ARM ), which points to the initialization dataset. (The l oc ation of this statement is ‘ SYS1.P ARMLIB ([...]

DEFINING THE PRINTER TO TH E HOST: TCP/IP ATTACHMENT E-4 XE ROX DOCUPRINT 96/4635 /180 IPS I NSTALLATION PLANNING GUI DE F ol lowing is a n e xam ple of the JES2 Initialization Dataset required com mands : Confi guring in JES3 Follow t he se steps to configure the PSF printer in JES3: 1. Loc ate the JE S3 i nitiali z ation dat aset (c omm only know[...]

DEF INING TH E PRINT ER TO THE HOST: TC P/IP ATTAC HMENT XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE E-5 The fol l owing table l ist s the JES3 FSS statem ent parameters to be defined . Ta b l e E - 3 . JES3 FSS statement par ameters Ite m descript ion D efault Source of valu e Rang e of acceptable val ues Comme nts Your value FSSNA[...]

DEFINING THE PRINTER TO TH E HOST: TCP/IP ATTACHMENT E-6 XE ROX DOCUPRINT 96/4635 /180 IPS I NSTALLATION PLANNING GUI DE Note: T he WS parameter CL specifies that datasets with the same clas s as t he WS parameter should be selected. D specifies that only datasets with the same destination as the DGROUP parameter s hould be selected. F specifies th[...]

DEF INING TH E PRINT ER TO THE HOST: TC P/IP ATTAC HMENT XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE E-7 4. Configu re t he pri n t e r in PSF/M VS Follow the se steps to configure the IPS printer in PS F: 1. Loc ate the PSF star tu p procedure in t he JES3 or JES2 star tup JCL procedure. This is no rmal ly k ept in S Y S1.PROCLIB, [...]

DEFINING THE PRINTER TO TH E HOST: TCP/IP ATTACHMENT E-8 XE ROX DOCUPRINT 96/4635 /180 IPS I NSTALLATION PLANNING GUI DE JOBT RLR Non e Ins tallation preferences 1 to 8-character alphanum eric string Name of OUTPUT statemen t that defines form and page def inition used t o format job trailer separator pages . LOGM ODE N /A Not applicable fo r TCP/I[...]

DEF INING TH E PRINT ER TO THE HOST: TC P/IP ATTAC HMENT XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE E-9 PIMSG (YES, 16) I nstallation preferences (YES, nn n ) or (NO, nnn ) YES: Specif ies e rror mess ages are always printed. nnn : Spec if ies maxi mum numbe r of m essages groups generate d before job is purged f rom spool. A value[...]

DEFINING THE PRINTER TO TH E HOST: TCP/IP ATTACHMENT E-10 XEROX DOCUP RINT 96/ 4 635/180 IP S INSTALLATION PLANNING GUIDE Note: T o speci fy a T CP/IP address space nam e other than the default (TCP/IP), code the following EXEC statement i n the appropriate P SF writer proced ure: STEP01 EXEC PGM=APSPPIEP, PARM=(,,,, tcpip_name ), REGION=4096K wh e[...]

DEF INING TH E PRINT ER TO THE HOST: TC P/IP ATTAC HMENT XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE E-11 5. Con fi g ure TC P /IP for M VS for t he pr in te r The TCP/IP Profi le dat a set conta ins s tateme nts that define the parameters used by TC P/IP for M VS addres s space. The follow ing parameters have spec ial consideration[...]

DEFINING THE PRINTER TO TH E HOST: TCP/IP ATTACHMENT E-12 XEROX DOCUP RINT 96/ 4 635/180 IP S INSTALLATION PLANNING GUIDE Co nside r atio ns for co nfig ur ing TCP /IP for MVS Following are some considerations for configuring TCP/IP for MVS: • T o specify a TCP /IP a ddress spac e name other t han th e default, TCPIP , code the f ollo wing EXEC s[...]

DEF INING TH E PRINT ER TO THE HOST: TC P/IP ATTAC HMENT XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE E-13 conne ction is no longer usable , ev en if the conne ction par tner is abr uptly powered of f or is no longer accessible through the network. The f requenc y of keep-alive transmissions is c ontrolled by th e INTER V AL para met[...]

DEFINING THE PRINTER TO TH E HOST: TCP/IP ATTACHMENT E-14 XEROX DOCUP RINT 96/ 4 635/180 IP S INSTALLATION PLANNING GUIDE 6. T est the printer to ensure it prints fr o m the MVS host Test the printer b y one of the f o llowing methods: • Send a job from the hos t throug h PS F to pr int on t he IPS. (Refer to y o ur IP S Gui de to Configuring and[...]

DEF INING TH E PRINT ER TO THE HOST: TC P/IP ATTAC HMENT XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE E-15 If the p i ng is unsuccessful: If your ping i s not successful, verify t he following: • The p rin ter is powered on. • The cables are proper ly conne cted b etween the pr inter and th e LAN. • The N etwor k Interface Card[...]

DEFINING THE PRINTER TO TH E HOST: TCP/IP ATTACHMENT E-16 XEROX DOCUP RINT 96/ 4 635/180 IP S INSTALLATION PLANNING GUIDE Co r rect ing f or prin ter perf ormance i ssues – MVS Should you notice any printer performance problem s — e.g., t hro ugh- put spee d de gradation, chec k the area s listed in the f ollowing tab le. T able E-11. Com ponen[...]

DEF INING TH E PRINT ER TO THE HOST: TC P/IP ATTAC HMENT XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE E-17 Ref erences The following I BM document s, referenced in this section , can provide additional information on MVS-to-IPDS printer connectivity. T able E-12. M VS refe re nce docu menta tion Ti tle Publication num ber MVS Collect[...]

DEFINING THE PRINTER TO TH E HOST: TCP/IP ATTACHMENT E-18 XEROX DOCUP RINT 96/ 4 635/180 IP S INSTALLATION PLANNING GUIDE AS/40 0 par ame ters This section describes the process of configuring an AS/400 system to communicat e and print on an I P S using TCP/IP. This process is applicable to either a Token Ring or an E t hernet LAN. This information[...]

DEF INING TH E PRINT ER TO THE HOST: TC P/IP ATTAC HMENT XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE E-19 Co nfigur ation ste ps – AS/400 Follow these steps to configure your A S/400 to print t o an I P S printer connected to the LAN, using TCP/IP. Configu ration worksh eet The fo llowing worksheet wi ll help you in planning t he [...]

DEFINING THE PRINTER TO TH E HOST: TCP/IP ATTACHMENT E-20 XEROX DOCUP RINT 96/ 4 635/180 IP S INSTALLATION PLANNING GUIDE 3. Create the p r inter device descripti on – AS/ 400 Follow the se steps to create the de vice de scription for t he IPS printer. 1. At the A S /400, press <F4 > t o prompt the CR T DE VPRT comma nd. 2. Key in the param[...]

DEF INING TH E PRINT ER TO THE HOST: TC P/IP ATTAC HMENT XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE E-21 T able E-16. Cr eat e D evi ce D esc rip ti on (P ri nte r) scr ee n for OS /400 w ith V 3R7 instal led CREATE DEVICE DESC (PRINTER) (CRTDEVPRT) Type choices, press Enter. DEVICE DESCRIPTION......... > XEROXIPS * DEVICE CLASS[...]

DEFINING THE PRINTER TO TH E HOST: TCP/IP ATTACHMENT E-22 XEROX DOCUP RINT 96/ 4 635/180 IP S INSTALLATION PLANNING GUIDE 4. T est th e p rinter con nection – AS/400 Test the printer by one of the following metho ds to ensure AS/400 is able to m ake a connection w ith the IPS pri nter: • Send a job from the hos t throug h PS F to pr int on t he[...]

DEF INING TH E PRINT ER TO THE HOST: TC P/IP ATTAC HMENT XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE E-23 If the p i ng is successful: Note: A successfu l p i ng usuall y indica tes tha t the AS/ 400 syst em can communicate with the IPS. However, you could receive a successful p ing even if t he IP addres s of the T CP/IP -attached [...]

DEFINING THE PRINTER TO TH E HOST: TCP/IP ATTACHMENT E-24 XEROX DOCUP RINT 96/ 4 635/180 IP S INSTALLATION PLANNING GUIDE • There is proper connectivity to the Multi-station Access Unit (MA U), if one is being used. • The I P a ddress used to de fine t he pri nter in PS F is un ique in the TCP/IP networ k. • The IP a ddress of the AS/400 syst[...]

DEF INING TH E PRINT ER TO THE HOST: TC P/IP ATTAC HMENT XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE E-25 AIX pa ramete rs This section provides information on using TC P/IP t o attach an IPS printer to an RS / 6000 in an AIX environment using PSF /6000 or InfoPrint Manager. The following information is applicable to an I PS attache[...]

DEFINING THE PRINTER TO TH E HOST: TCP/IP ATTACHMENT E-26 XEROX DOCUP RINT 96/ 4 635/180 IP S INSTALLATION PLANNING GUIDE Net wor k configu ration s – AI X The IPS printer i s supported in the fol lowing types of RS/6000 with AIX configurations, provided that the network is configured properly and th e softw are prerequisites are inst alled. • [...]

DEF INING TH E PRINT ER TO THE HOST: TC P/IP ATTAC HMENT XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE E-27 Ref erences The following document s can provide additional information on AIX- to-IPDS prin ter connect ivity. IBM Print Services Facility for AIX manuals are av ailable in PD F fo rm at a t th e f oll o wi ng IB M w e b si te [...]

DEFINING THE PRINTER TO TH E HOST: TCP/IP ATTACHMENT E-28 XEROX DOCUP RINT 96/ 4 635/180 IP S INSTALLATION PLANNING GUIDE OS/2 par amet ers This section describes the process and parameters t o configure an OS/2 system t o co m munica te with an d p rint to y ou r IPS p rinter usi ng TCP/IP. This information applies both to Token Ring and Ethernet [...]

DEF INING TH E PRINT ER TO THE HOST: TC P/IP ATTAC HMENT XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE E-29 Co nfigur ation ste ps – OS/2 This section describes t he process for configuring a TC P/IP attached host com puter wi th OS/2 t o print on an IPDS printer such as you r IPS. Configu ration worksh eet The fo llowing worksheet [...]

DEFINING THE PRINTER TO TH E HOST: TCP/IP ATTACHMENT E-30 XEROX DOCUP RINT 96/ 4 635/180 IP S INSTALLATION PLANNING GUIDE 3. Defi n e the printer to P SF/2 Follow these steps to define the IP S printer to P S F/2. 1. S elect the Con trol Panel icon from the P SF/2 f ol der (located on the OS/2 Desktop). 2. F r om the C ontrol Panel Main w indow , c[...]

DEF INING TH E PRINT ER TO THE HOST: TC P/IP ATTAC HMENT XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE E-31 7. S elect Create. A n ent r y representing the IPS is created within the PSF/2 Control P anel Main windo w . 4. Defi n e a PSF/2 print q ueue for the printer (op t ional) You may define a PSF/2 queue for the IPS, using the PFT/[...]

DEFINING THE PRINTER TO TH E HOST: TCP/IP ATTACHMENT E-32 XEROX DOCUP RINT 96/ 4 635/180 IP S INSTALLATION PLANNING GUIDE 5. E nsure that the De v ice nam e sel ected on the D e vi ce list is the IPS printe r y ou defined pre viously . 6. Select Setup. The pr inter que ue is created on the OS /2 desktop. 7. T o m ake t h is queue av aila b le to ot[...]

DEF INING TH E PRINT ER TO THE HOST: TC P/IP ATTAC HMENT XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE E-33 I f PS F/2 ou tp ut for the IP S pri nts else whe re: Follow these steps to determine whether the I P address of the printer is unique. 1. Po wer off the printer . 2. Wait at least five minutes for TCP /IP to clear the Addres s [...]

DEFINING THE PRINTER TO TH E HOST: TCP/IP ATTACHMENT E-34 XEROX DOCUP RINT 96/ 4 635/180 IP S INSTALLATION PLANNING GUIDE • The OS /2 TCP/IP stack has been initialized (u sually done during system bootup). T he TCP/IP NET STAT command has s everal options which may reveal network problems. • The OS /2 queue is not in a “ Ho ld ” state. • [...]

DEF INING TH E PRINT ER TO THE HOST: TC P/IP ATTAC HMENT XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE E-35 Ref erences – OS/2 The following I BM document s, referenced in this section , can provide additional information on OS/2-to-IPDS printer connectivity. Printer Ensure th at t h e Maximum T ransmi ssion Unit si z e (MTU) is as [...]

DEFINING THE PRINTER TO TH E HOST: TCP/IP ATTACHMENT E-36 XEROX DOCUP RINT 96/ 4 635/180 IP S INSTALLATION PLANNING GUIDE[...]

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE GLOSSARY-1 Gl ossary This glossary contains a l i st of t e rms for working with the X erox DocuPri nt 96/4635/ 18 0 print i ng syst e ms, a n d a definit ion of each. A3 Paper si ze meas uring 297 by 420 mm. A4 Paper si ze meas uring 210 by 297 mm. American Stan dard Code for Information [...]

GLOSSARY GLOSSARY-2 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION PLANNING GUIDE bi nary dig it (b it) I n the bina ry numbering syst em, either of the characte rs 0 or 1. The bit is the basic un it of information wi th which a computer works. It can take the form o f a m agn etized spot, an electric pulse, a positive or negative charge, etc. A [...]

GLOSSA RY XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE GLOSSARY-3 byt e Fixed number o f bits (in data p rocessing, us ually 8) operated upon as a unit. A by te may represent a c haracter, a machine instruction, or some ot her logical unit of informat ion. carriage r eturn Control c h aracter that (unless set t o be interpret ed as a[...]

GLOSSARY GLOSSARY-4 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION PLANNING GUIDE compa tibil ity Characteristic of computer equipment p ermitting one device to use the same information or programs as another device without conversion or code modificat ion. compile To t ransl ate instructions writ ten in high-level language into machine language [...]

GLOSSA RY XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE GLOSSARY-5 decomp ose r Printer Controlle r task t hat translates print dat a from the PDL command file i nt o a bitmap image of the page to be pri n ted. def aul t P redefined value the system uses when a nother valu e is not provided. devic e Any piece of h ardware other than t[...]

GLOSSARY GLOSSARY-6 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION PLANNING GUIDE Ethe rnet Network standard consisting of a coaxial cable or twisted pair and associated compone nts for connecting workstations to each other, t o file servers, and to peripherals. This com munication sy stem enab les workstation users to share information and servi[...]

GLOSSA RY XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE GLOSSARY-7 flag Small indicator markin g the occurrenc e of an e vent or the ex istence of a certain con dition while the program is exec uting. font A complete set of alphanumeric charac ters and punctuation marks, having commo n characteristics such as st yle, width, height, an[...]

GLOSSARY GLOSSARY-8 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION PLANNING GUIDE high -le vel l ang uag e Programm ing l anguage c onsisting of words and symbo ls that are close to n ormal Engli sh and, t herefore, readily understandab le by the user. High-level source langu ages are used for mos t comme rcial programs. hos t Computer accessed b[...]

GLOSSA RY XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE GLOSSARY-9 JI S B4 A paper s ize m easuring 257 by 364 m m u sed i n Japa n. job Pr i nt data and attributes required for processing and printing a document . job size Size o f the pri n t master data file measured in bytes. JS L job source l ibrary. Collection o f unc ompiled jo[...]

GLOSSARY GLOSSARY-10 XEROX DOCUPRI NT 96/ 4 635/180 I PS INS TA LLATION P L ANNING GUI DE long -edge f eed (L EF ) The movem ent of p aper throug h the printer i n the direction of the paper length (the l onger side of a sheet of paper). See also sho r t- edge feed. low-l e vel langua g e Langu age that is c lose to machine languag e so that each w[...]

GLOSSA RY XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE GL OSSARY-11 NPS Network P rinting S ystem objec t file Source f ile convert ed into m achine la nguage (binary c ode). offline Devices not un der the act ive control of a central proces sing unit. For example, a c omput er makes outpu t to a magnetic t ape. The tape is then u se[...]

GLOSSARY GLOSSARY-12 XEROX DOCUPRI NT 96/ 4 635/180 I PS INS TA LLATION P L ANNING GUI DE por tr ait pag e ori entat ion Orien tation of p rint lines or t he top of an il l ustration parallel to the short edge of the paper. Po st Sc rip t P age description langua ge d eveloped by Adobe System s, Incorporated. PostScript desc ribes th e input (type,[...]

GLOSSA RY XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE GL OSSARY-13 raste r o utput scann er (ROS) Raste r output s canne r. A m otor – driven laser sc anning system . Read-Only Mem ory (ROM) Soli d-state memory for programs. I t cannot be rewri tten. re ad/write head A s mall electromagn et that reads , wri t es, and eras es data [...]

GLOSSARY GLOSSARY-14 XEROX DOCUPRI NT 96/ 4 635/180 I PS INS TA LLATION P L ANNING GUI DE syntax Rules governin g the structure of expres sions in a program ming language. syntax erro r System respon se to a m istake in the entry of a c ommand . sysgen A bbreviated form of system generation. system administrato r Person responsible for configurin g[...]

GLOSSA RY XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE GL OSSARY-15 ULTRIX Oper a ti n g syst em that runs on DECStat ions. It consist s o f a hierarchical syst em of comma nds, shel ls, files, and directories. S ee also operating system. UNIX Oper a ting system f or computer s, usually wo rking in a netwo rk environment. UNIX c onsi[...]

GLOSSARY GLOSSARY-16 XEROX DOCUPRI NT 96/ 4 635/180 I PS INS TA LLATION P L ANNING GUI DE[...]

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE INDEX-1 Inde x Numerics 1/4-inch cartridge tape drive, 2-6 10Mb/sec tw isted pair st a ndard, 4-7 3-pitch mode, A-5 4 mm cartridge tape drive, 5-9 ordering, A-13 4 mm cartridge tape drive, 2-3 50 Hz voltage requirements Delta configurations, 6-4 Wye configurations, 6-4 60 Hz voltage requir[...]

INDEX INDEX-2 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION PLANNI NG GUIDE consum able supplies table, A-15 – A-21 customer responsibilities, 4-2 – 4-3, 8 -2 D danger labels, iii data cab les, 7-1 Data Control I nterf ace Module (DCIM2) c a rd, 2-1, 2-4 data streams, interpolated, 1 -5 definitions, see sample printer definitions delivery re[...]

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE INDEX-3 INDEX J JES2 FSS statemen t parameters, E-3 – E-4 Initialization Dataset comman ds example, E-4 pr int e r d efin i ti on s, D -1 JES3 configuring, E-4 FSS statemen t parameters, E-5 – E-6 initialization dataset command s example, E -6 K keyboard, 2-4, 2-7, 5-10 L labels danger[...]

INDEX INDEX-4 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION PLANNI NG GUIDE pinging AS/400, E-22 – E-2 4 MVS, E- 14 – E-15 OS/ 2, E-32 – E-33 placement, 6-7 power requirements, 6-29 – 6- 31 purge tray, 3 -1 queues PSF/2, defining, E-31 – E- 3 2 sample definitions MVS with channel attachment, D-1 – D-3 MVS with TCP/IP connection, E-1 [...]

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE INDEX-5 INDEX diskettes, A -13, A-21 dry ink t one r, A- 12, A-2 1 waste bott le, A-21 fus er agent, A -12, A- 21 shie ld , A-12 M ICR to ol s, A- 14 paper, A-1 – A -11, A- 15 – A-2 0 supplies t able, A-15 – A-21 support services , B-1 – B-4 syste m control ler, se e P rin ter Con [...]

INDEX INDEX-6 XEROX DOCUPRI NT 96/ 4 635/180 I PS INSTALLATION PLANNI NG GUIDE[...]