Yamaha RX-V671 Bedienungsanleitung

AV Receiver Owner’s Manual English for Europe, Asia, Afri ca, Oceania and Latin America Be sure to read “Safety Brochure” (su pplied booklet) before using this unit.[...]

En 2 CO N T E N T S What you can do with this unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Part names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

En 3 Playing back music stored on PCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Media sharing setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Playback of PC music contents . . . . . . . . . . . . . . . . . . . . [...]

En 4 Information on HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 9 HDMI Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 HDMI signal compatibility . . . . . . . . . . . . . . . .[...]

En 5 Ac cessories Check that the following accessories are supplied with this product. ■ Remote control ■ Batteries (AAA, R03, UM-4) (x 2) ■ YPAO microphone ■ VIDEO AUX input cover Insert into the remote control in the correct polarity (+/-) ■ AM antenna ■ FM antenna ■ CD-ROM (Owner’s Manual) ■ Easy Setup Guide ■ Safety Brochure[...]

En 6 FEA TURES Wha t you can do with this unit Supports 2 to 7.1 (plus presence) channel speaker system. Allows yo u to enjoy fa v orite acoustic spaces in various styles. A utomatically optimizing the speaker settings to suit y our room (YP A O) p.35 Sound field reproductions l ike actual movie theaters and concert halls from stereo or multi-chann[...]

En 7 F ull of useful functions! ● Connect ing various devices (p .26) A number of HDMI jacks and various input/output jacks on this unit allow you to connect video devices su ch as BD/DVD players, audio devi ces such as CD players, game consoles and camcorders, and so on. ● Playing back T V audio in surround sound with a single HDMI cable conne[...]

En 8 Fro nt pa ne l 1 MAIN ZONE T urns on/off (standby) this unit. 2 YP A O MIC jac k For connecting the supplied YP AO microphone (p.35). 3 ZONE2 Enables/disables the audio output to Zone2 (p. 69). 4 Remote control sensor Receives remote con trol si gnals (p.5). 5 ZONE CONTROL Switches the zones (main or Zone2) to operate with the fr ont panel con[...]

En 9 Fr ont displa y (indicators) 1 HDMI Lights u p when HDMI s ignals are being in put or output . OUT Lights up when HDMI signals are being out put. 2 CINEMA DSP Lights up when CINEMA DSP (p.43) is working. CINEMA DSP Lights up when CINEMA DSP 3D (p.45) is working. 3 ENHANCER Lights up when Compressed Music Enhancer (p.46) is working. 4 AD APTIVE[...]

En 10 Rear panel 1 DOCK jack For connecting an optional Y amaha pr oducts such as iPod dock (p.53), iPod wireless system (p.53) and Bluetooth receiver (p. 57). 2 PHONO jacks For connecting a turntable (p.29). 3 NETWORK jac k For connecting to the network (p.30 ). 4 ANTENNA jacks For connecting F M and AM antennas ( p.30). 5 HDMI OUT jack For connec[...]

En 11 Remote con trol 1 Remote control signal transmitt er T ransmits infrared signals. 2 MAIN/ZONE2 Switches the zones (main or Zone2) to opera te with the remote c ontrol (p.69). 3 SOURCE T urns on/off an external device. 4 Input selection keys Select an input sour ce to play back. HDMI1~5 HDMI1~5 jacks V- A U X VIDEO AUX jacks (on the front pane[...]

En 12 SETUP Now all the preparations are complete. Enjoy play ing movies, music, radio, etc. with this unit! General se tup proc edur e 1 Placing speakers (p .13) Select the speaker layo ut depending on the number of speake rs and place the speakers in your room. 2 Connecting speakers (p .17) Connect the speakers to this unit. 3 Connect ing a TV (p[...]

En 13 Select the speaker layout depending on the nu mber of speakers and place the speakers and subwoofer (with built-in amplifier) in your room. This section describes the representative speaker layout examples. • For inf ormation on the ideal speaker lay out, see “Ideal speaker la yout” (p .114). • If you hav e 7 speakers , use two of the[...]

En 14 7.1+2 channel syst em 7.1 channel system (using surr ound back speak ers) 7.1 channel syst em (using pr esence speak ers) 6.1 channel system • The surround back speakers and presence speakers do not produce sounds simultaneously . This unit automatically switches the speakers to be used depending on a selected CINEMA DSP (p.43). 1 Speaker p[...]

En 15 5.1 channel syst em 4.1 channel system 3.1 channel syst em 2.1 channel system 1 Speaker placement 2 3 4 5 6 7 8 9 10[...]

En 16 ■ Setting the speak er impedance This unit is configured for 8-ohm speakers at the factory . When con necting 6-ohm speakers, set the speaker imped ance to “6 Ω MIN”. In this case, you can also use 4- ohm speakers as the front speakers. 1 Before connecting speakers, connect the power cable to an A C wall outlet. 2 While holding down ST[...]

En 17 Connect the speakers placed in your room to the unit. Here are connections of 7.1+2, 7.1 and 6.1 channel system as examples. If you select another system, connect speakers while referring to the connection of 6.1 channel system. Cables necessary for connection (commercially availab le) Speaker ca bles (x the number of speake rs) Audio pin ca [...]

En 18 7.1 channel syst em (using presence speak ers) 6.1 channel syst em When using only one surround back speaker , connect it to the SINGLE jack (L side ). SPEAKERS FRONT CENTER SURROUND SURROUND BACK/BI–AMP R L R R L L SINGLE SUBWOOFER SINGLE ZONE 2/ PRESENCE EXTRA SP R L SPEAKERS FRONT CENTER SURROUND SURROUND BACK/BI–AMP R L R R L L SINGLE[...]

En 19 ■ C onnecting speaker cables Speaker cables have two wires. One is for connecting the negative (-) ter minal of the unit and the speaker , and the other is for the positive (+) ter minal. If the wires are color ed to prevent confusion, con nect the black wire to the negative and the other wire to the positive. a Remove appro ximately 10 mm [...]

En 20 ■ V ideo/audio jacks HDMI jacks T ransmit digital video and digi tal sound through a single jack. Use an HDMI cable. • Use a 19-pin HDMI cable with the HDMI logo. We recommend using a cable less than 5.0 m long to prev ent signal quality degradation. • T o connect a device that has a D VI jack, an HDMI/D VI-D cab le is required. • The[...]

En 21 Connect a TV to this unit so that videos input to this unit can be output to the TV . Y ou can also enjoy playback of TV audio on this unit. The connection method varies depending on f unctions and video input jacks available on your TV . Refer to the instruction manual of the TV and choose a co nnection method. ■ C onnection method 1 (HDMI[...]

En 22 Necessary settings T o use HDMI Control and ARC, you need to configur e the following settings. For details on settings a nd operations of your TV , refer to the instruction manual of the TV . 1 After connecting external devices (TV , pla yback devices, etc.) and power cab le of this unit, t urn on this unit, TV and pla ybac k de vices. 2 Con[...]

En 23 ■ C onnection method 2 (HDMI Control-compatible TV ) Connect the TV to this unit with an HDMI ca ble and a digital optical cable. • The following e xplanation is based on the assumption that you hav e not changed the “HDMI” parameters (p.93) in the “Setup” menu. • If you make an HDMI connection between your TV and this unit, any[...]

En 24 3 Configure the settings for HDMI Contr ol. a Enable HDMI Co ntrol on the TV a nd pla yback de vices (HDMI Contr ol-compatib le BD/ D VD play er , etc). b T ur n off th e main po wer of the TV a nd then turn off th is unit and pla ybac k de vice s. c T ur n on th e main po wer of the TV and then turn on this unit and p la ybac k de vices . d [...]

En 25 ■ C onnection method 4 ( TV wit hout HDMI input jacks) Depending on the video input jacks available on your TV , choose one of the following connections. If you select “A V4” as th e input source by pr essing A V4 or SCENE(TV ), the TV audio will be played back on this unit. • If you connect your TV to this unit with a cable other tha[...]

En 26 This unit is equipped wit h a variety of in put jacks including HDM I input jacks to allow you to connect different types of playback devices. For information on how to connect an iPod, a Bluetooth component or a U SB storage device, see the following pages. - Connecting an iPod (p.52) - Connecting a Bluetooth receiver (p.57) - Connecting a U[...]

En 27 ■ S-video connection (U.K. and Europe models only) Connect a video device to this unit with an S-video cable and a ster eo pin cable. If you select the input source by pressing A V5, the video/audio played b ack on the video device will be output from this unit. • When video signals are input through the S VIDEO jack and VIDEO jack of the[...]

En 28 ■ Changing the combinat ion of video/audio input jacks If the combination of video/audio input jacks prepared on this unit does not match your video device, change its combination according to the output jacks of your device. It enables you to connect a video device that has the following video/audio output jacks. Necessary setting For exam[...]

En 29 Connecting audio devic es ( CD pla yers , etc .) Connect audio devices such as CD p layers, MD players and a turntable to this unit. Depending on the audio output jacks availabl e on your audio device, choose one of the following connections. If you select the input source by pressing A V1~6, AUDIO1~2 or PHON O, the audio played back on the a[...]

En 30 Connect the supplied FM/AM antennas to th is unit. Assembling and connectin g the AM antenna • Unwind the antenna cable from the AM antenna unit only the length needed. • The wires of the AM antenna have no polarity . Connect this unit to your router with a comme rcially-available STP network cab le (CA T -5 or higher straight cable). Y o[...]

En 31 • Some security software installed on your PC or the firewall settings of your netw ork devices (such as a router) may b lock the access of this unit to the network devices or the Internet. In such cases, configure the security software or firewall settings appropriately . • Y ou can co nnect this unit to up to 16 music servers (PC , etc.[...]

En 32 Co nnecting a device c ompatible with SCENE link playback (remote c onnec tion) If you have a Y amaha product that has the capability of the SC ENE control signal transmission, you can control the Y amaha product in conjunction with a sc ene selection (p.41) by connecting it to the REMOTE OU T jack with a monaural mini-jack cable. • If you [...]

En 33 After all the connections are complete, plug in the power cable. 8 C onnecting the pow er c able Before connecting the power cable (General model only) Set the switch position of VOL T AGE SE LE CTOR accor ding to your local voltage. V oltages are AC 110-120/220-240 V , 50/60 Hz. • Make sure you set V OL T AGE SELECTOR of the unit BEFORE pl[...]

En 34 Select a desired on-screen menu language from English (default), Japanese, French, German, Spanish and Russian. 1 Press RECEIVER to turn on this unit. 2 T urn on the TV and s witc h the TV input to displa y the video from this unit. 3 Press ON SCREEN. 4 Use the cursor keys to select “Setup” and press ENTER. 5 Use the cursor keys ( / ) to [...]

En 35 By using the Y amaha Parametric room Acoustic Optimizer (YP AO) function, this unit automatically detects speaker con nections and distances from the listening posi tion, and optimizes the speaker settings such as volume balance and acoustic parameters to suit your room. Please note the following when using YP AO. • Use YP AO after connecti[...]

En 36 The f ollo wing screen appears on th e TV . • T o cancel the operation, disconnect the YP AO microphone bef ore starting the measurement. • YP AO measurement is not perf ormed correctly when any obstacles are in the room. • During the measur ing process (about 3 minutes), keep stuff in the corners or remove it from the room. 5 T o start[...]

En 37 Checking the meas urement r esults Y ou can check the YP AO me asur ement results. 1 After the measurement, use the cursor keys to select “Result” and press ENTER. • Y ou can also select “Result” from “Auto Setup” (p .86) in the “Setup” menu. In this case, the previous measurement results are displa yed. The f ollo wing scre[...]

En 38 Error messages If any error message is displayed during the meas urement, resolve the problem and perform Y P AO again. Error m essage Cause Remedy E-1: No Front SP Front speakers are n ot detected. Follow the on-scr een instructions to exit YP AO, turn off this unit, and then chec k the speaker connections. E-2: No Sur . SP Either of surroun[...]

En 39 W arni ng messages Even if any war ning message is displayed after the measuremen t, you can save the measur ement results by following on-scr een ins tructions. However , we recommend you perform Y P AO again to use this unit with the optimal speaker settings. W arning m essage Cause Remedy W-1: Out of Ph ase Any of the speaker cables may be[...]

En 40 S CENE RETURN VOL UME S UR. DECODE S TRAIGHT ENHANCER S LEEP PURE DIRECT HDMI AV 12 3 4 V- AUX 5 FM INFO MEMORY AM PRE S ET MOVIE MU S IC BD DVD TV CD RADIO MUTE ENTER 56 90 12 3 4 MODE TV TV VOL TOP MENU POP-UP MENU DI S PLA Y S OURCE MAIN ZONE 2 RECEIVER CODE S ET INPUT DOCK AUD IO OPTION ON S CREEN 5 12 3 4 6 TUNER NET U S B TUNING PHONO S[...]

En 41 S CENE RETURN VOL UME S UR. DECODE S TRAIGHT ENHANCER S LEEP PURE DIRECT HDMI AV 12 3 4 V- AUX 5 FM INFO MEMORY AM PRE S ET MOVIE MU S IC BD DVD TV CD RADIO MUTE ENTER 56 90 12 3 4 MODE TV TV VOL TOP MENU POP-UP MENU DI S PLA Y S OURCE MAIN ZONE 2 RECEIVER CODE S ET INPUT DOCK AUD IO OPTION ON S CREEN 5 12 3 4 6 TUNER NET U S B TUNING PHONO R[...]

En 42 S CENE RETURN VOL UME S UR. DECODE S TRAIGHT ENHANCER S LEEP PURE DIRECT HDMI AV 12 3 4 V- AUX 5 FM INFO MEMORY AM PRE S ET MOVIE MU S IC BD DVD TV CD RADIO MUTE ENTER 56 90 12 3 4 MODE TV TV VOL TOP MENU POP-UP MENU DI S PLA Y RECEIVER CODE S ET INPUT DOCK AUD IO OPTION ON S CREEN 5 12 3 4 6 TUNER NET U S B TUNING PHONO S C ENE RETURN V O L [...]

En 43 Enjoying sound field eff ects (CINEMA DSP) This unit is equipped wit h a variety of sound programs that utilize Y amaha's original DSP technology (CINEMA DSP). It allows you to easily create sound fields like actual movie theaters or concer t halls in your r oom. • When you pla y back DTS-HD sources, the DTS decoder is automatically se[...]

En 44 ■ Sound pr ograms suitable f o r music/stereo play back (MUSIC) The following sound programs are optimize d for listening to music sources such as music CDs. Y ou can also select stereo playback. ❑ CLASSICAL ❑ LIVE/CL UB ❑ STEREO Hall in Mun ich This program simulates a concert hall with approximately 250 0 seats in Munich, using styl[...]

En 45 ■ Enjoying stereoscopic sound fields ( CINEMA DSP 3D ) CINEMA DSP 3D enables to create a natural stereoscopic sound field in your r oom. CINEMA DSP 3D functions when both of the following condition s are met. - One of the sound programs (except 2ch Ster eo and 7ch Stereo) is selected (p.43). - “CINEMA DSP 3D MODE” (p.75) in the “Optio[...]

En 46 • Y ou ca nnot select the Dolby Pro Logic IIx decoders when headphones are connected or when “Surround Back” in the “Setup” menu is set to “None”. Enjoying pur e high fidelity sound (Pure Direc t) When the Pure Direct mode is enabled, this unit plays back the selected source with the least ci rcuitry to reduce the electrical noi[...]

En 47 Y ou can tune into a radio station by specifying its fr equency or selecting from register ed radio stations. • The radio frequencies differ depending on the country or region where the unit is being used. The explanation of this section uses a display with frequencies used in U.K. and Europe models. • If you cannot hav e a good reception[...]

En 48 Registering fav orite r adio stations (pre set) Y ou can register up to 40 radio stations as presets. Once you registered stations, you can easil y tune into those stations by selecting the preset number . • Y ou ca n automatically register FM radio stations with strong signals using “Auto Preset” (p.51). ■ Registering a r adio statio[...]

En 49 S CENE RETURN VOL UME S UR. DECODE S TRAIGHT ENHANCER S LEEP PURE DIRECT HDMI AV 12 3 4 V- AUX 5 FM INFO MEMORY AM PRE S ET MOVIE MU S IC BD DVD TV CD RADIO MUTE ENTER 56 90 12 3 4 MODE TV TV VOL TOP MENU POP-UP MENU DI S PLA Y RECEIVER CODE S ET INPUT DOCK AUD IO OPTION ON S CREEN 5 12 3 4 6 TUNER NET U S B TUNING PHONO S C ENE V O L U M E S[...]

En 50 Operat ing the radio on the TV Y ou can view the radio information or s elect a radio st ation on the TV . 1 Press TUNER to select “TUNER” as the input sour ce. The pla ybac k screen is displa y ed on the TV . ■ Playback scr een 1 Radio station information Displays the information of the selected radio station such as the selecte d band[...]

En 51 ■ Brow se screen 1 Preset station list Displays the list of preset stations. Use the cursor keys to select a pr eset station and press ENTER to tune into it. 2 Preset number 3 Operation menu Use the cursor keys to select an item and pr ess ENTER to confirm the selection. T o close the submenu, pr ess RETURN. Menu Submenu Function Utility Me[...]

En 52 Y ou can play back iPod music/videos on this unit using a USB cable supplied with iPod, an optional Y amaha iPod universal dock (s uch as YDS-12) or an optional Y amaha iPod wireless system (YID-W10). • This manual describes both the “iPod” and “iPhone” as the “iP od”. “iP od” means both “iP od” and “iPhone” unless t[...]

En 53 ■ Using an iP od dock Refer to the instruction manual of the iPod dock in addition. 1 When this unit is in standb y mode , co nnect the iP od dock to the DOCK jac k. Locate the iP od dock a t the distance as f ar as from th is unit. 2 Connect your iPod to the iP od dock and turn on this unit. • While an iPod is connected to the iP od d oc[...]

En 54 Playback of iP od conten ts When using a USB cable or an iP od dock, you can control the iPod with the menu displayed on the TV . • When using an iPod wireless system, y ou cannot control the iP od from the TV screen. Operate your iP od itself to select the content and star t pla yback. 1 When using a USB cable: press USB to select “USB?[...]

En 55 ■ Playback scr een 1 Status indicators Display the current sh uffle/r epeat se ttings (p. 56) and playback st atus (play/pause, etc). 2 Playback inf ormation Displays the artist name, album name, song title and elapsed/remai ning time. Use the cursor keys to select information to be scrolled. 3 Album image 4 Operation menu Use the cursor ke[...]

En 56 ■ Shuffle/repeat settings Y ou can configure the shuffle/r epeat settings of your iPod. • When using an iPod wireless system, configure the shuffle/repeat settings directly on your iP od. • During simple play , configure the shuffle/repeat settings directly on your iPod, or press MODE to display the TV menu screen and then f ollow the p[...]

En 57 Y ou can play back music stored on a Bluetooth component on this unit using a Y amaha Bluetooth wireless audio receiver (such as YBA-10, optional). Refer to the instruction manuals of the Bluetooth receiver and your Bluetooth component in addition. This unit supports A2DP (Ad vanced Audio Distribution Profile) of the Bluetooth profile. • Wh[...]

En 58 4 Select the Bluetooth receiver fr om the device list and enter the pass key “0000”. “Completed” appears when the pai ring is complete. • Depending on Bluetooth components, “BT connected” appears when the pairing is complete. In this case, the wireless connection has been already established. Y ou just need to star t pla yback o[...]

En 59 Y ou can play back music files stored on a USB storage device on this unit. Refer to the instruction manuals of the USB storage device in addition. This unit supports USB mass storag e class devices (F A T 16 or F A T 32 format, except USB HD Ds). • This unit supports playback of W AV (PCM format only), MP3, WMA, MPEG-4 AA C and FLAC files.[...]

En 60 ■ Brow se screen 1 Status indicators Display the current sh uffle/r epeat se ttings (p. 61) and playback st atus. 2 List name 3 Contents list Displays the list of USB storage device contents. Use the cursor keys to select an item and press ENTER to confi rm the selection. 4 Item number/total 5 Operation menu Use the cursor keys to select an[...]

En 61 ■ Shuffle/repeat settings Y ou can configure the shuffle/r epeat settings for playback of USB storage device contents. • The shuffle/repeat settings are shared by USB and network sources. 1 When “USB” is selected as the input sour ce, press OPTION. 2 Use the cursor keys to sele ct “Shuffle” (Shuffle) or “Repeat” (Repeat) and p[...]

En 62 Y ou can play back music files stored on your PC or DLNA- compatible NAS on this unit. • T o use this function, this unit and your PC must be connected to the network properly (p.30). Y ou can check whether the network parameters (IP address, etc.) are properly assigned to this unit in “Networ k” (p .99) in the “Inf ormation”. • T[...]

En 63 • T o return to the previous screen, press RETURN. • Files not suppor ted by this unit are not listed (or cannot be selected ev en if listed). • Y ou can register y our fa vorite items as shortcuts (p.70) and access them directly by selecting the shortcut numbers. ■ Brow se screen 1 Status indicators Display the current sh uffle/r epe[...]

En 64 ■ Shuffle/repeat settings Y ou can configure the shuffle/r epeat settings for playback of PC music contents. • The shuffle/repeat settings are shared by USB and network sources. 1 When “PC” is selected as the input source, press OPTION. 2 Use the cursor keys to sele ct “Shuffle” (Shuffle) or “Repeat” (Repeat) and press ENTER. [...]

En 65 Y ou can listen to Internet radio sta tions using the vT uner Internet radio station database service par t icularly customized for this unit, providing a database of numerous radio stations in the world. • T o use this function, this unit must be connected to the Inter net (p .30). Y ou can check whether the network parameters (IP address,[...]

En 66 • By adding your fa v orite Inter net radio stations to “Bookmark”, you can access to them quickly from “Bookmark”. T o remove stations from “Bookmark”, select the station in “Bookmark” and then “Bookmar k Off ”. • Y ou ca n also register y our fa vorite Internet radio stations by accessing the following w ebsite with [...]

En 67 The multi-zone function allows you to play back separate input sources in the room wher e this unit is installed (main zone) and another room (Zone2). For example, while you are watching a TV in the living room (main zone), another person can listen to radio in the bedroom (Zone2). • Only analog audio signals (including radio, USB and netwo[...]

En 68 ■ Using an e xternal amplifier Connect the external amplifier placed in Zone2 t o this unit with a stereo pin cable. ■ Opera ting this unit from Z one2 (remote connection) By connecting an infrared signal receiver/emitter to the REMOTE IN/OUT jacks of this unit, you can operate this unit and exter nal devices from Zone2 with the supplied [...]

En 69 Remote c onnections between Y amaha products If you are using Y amaha pr oducts that support remote connections like this unit, an infrared signal transmitter is unnecessary . Y ou can transmit remote contr ol signals by connecting the REMOTE IN/OUT jacks with monaural mini-jack ca bles and an infrared signal receiver . Co nt ro ll in g Zon e[...]

En 70 Registering fav orite items (shortcut) Y ou can register up to 40 favorite USB and network contents as shortcuts and access them dir ectly by selecting the shortcut numbers. • Y ou ca n also use the “Bookmark” feature to register Internet radio stations (p.65). ■ Registering an item Select a desired item and register it to a shortcut [...]

En 71 C ontrolling this unit from the w eb bro wser (web c ontrol) Y ou can control this unit with the web control scr een displayed in the web browser . • T o use this function, this unit a nd y our PC must be connected to the netw ork properly (p.30). • Some security software installed on your PC may bloc k the access of this unit to your PC.[...]

En 72 ■ Control screen 1 PLA Y INFO Selects an input source or co ntrols playback for the sel ected zone. 2 TO P M E N U Moves to the top menu screen. 3 SCENE Select a scene for the main zo ne. 4 PO WER T urns on/off the power for the selected zone. 5 VO L U M E Adjusts the volume or mutes the audio output for the select ed zone. Y ou can also sw[...]

En 73 V iewing the current status ■ Switching inf ormation on the front display 1 Press INFO . Each time y ou press the k ey , the displa y item s witches . About 3 seconds later , the corresponding inf ormation appears. • Av ailable items v ary depending on the selected input so urce . Also , the display item can be applied separately to each [...]

En 74 Y ou can configure the playback-related setti ngs in accor dance with a playback source. Since this menu is operational on the front panel (or on the TV screen), you can easily configure the settings during playback. 1 Press OPTION. Front display TV screen 2 Use the cursor keys to select an item and press ENTER. • T o return to the previous[...]

En 75 ■ T o n e Co nt rol ( T on e Co nt ro l) Adjusts the high-frequency range (T reble) and low-frequency range (Bass) of speaker sounds. When connecting headphon es, you can adjust high-frequency range and low- frequency range of sounds output from headphones. Choices T reble (T reble), Bass (Bass) Setting range -6.0db ~ Bypass (Bypass) ~ +6.0[...]

En 76 ■ Extended Surround (EXTD Surround) Selects how to play back 5.1- to 7. 1-channel sources when su rround back speakers are used. Settings ■ V olume T rim ( V olume T rim) Corrects volume differ ences between input sources. If you are bothered by volume differences when switching between input s ources, use this function to correct it. •[...]

En 77 C ONFIGURA TIONS Y ou can change the input source settings using the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “Input” and press ENTER. 3 Use the cur sor ke ys ( / ) to selec t an input source to be configured and press the cursor key ( ). The input source of thi s unit also changes . • Y ou can still s witch the inp[...]

En 78 ■ Rename/Ic on Selec t Changes the input source name and icon displayed on the front display or TV screen. Input sources HDMI1~5, A V1~6, V -AUX, AUDIO1~ 2, PHONO, USB, DOCK ■ Setup procedure 1 Use the cursor keys ( / ) to select an icon and press the cursor key ( ). 2 Press ENTER, use th e cur sor keys to rename, and then press ENTER aga[...]

En 79 ■ iP od Interlock Selects whether to control this unit in conjunction with operations of the iP od connected to the iPod wireless system. Input sources DOCK (iPod) • This function is availab le only when an iP od wireless system is connected to this unit. ❑ Powe r & In pu t Selects whether to control the power and input source selec[...]

En 80 Y ou can change the settings of the SCENE function (p.41 ) using the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to sel ect “Scene” and press ENTER. 3 Use the cursor ke ys ( / ) to select a scene to be config ured and press the cursor key ( ). • Y ou can still s witch the scene by using cursor ke ys ( / ) after step 3. 4 Use the[...]

En 81 ■ Load Loads the settings registered to selected scene. Select “DET AIL” to configure the SCENE link playback setting or view the scene assignments. ❑ Devic e Contr ol Enables to start playback of exter nal devices connected to this unit via HDMI or a Y amaha product connected to the REMOTE OUT jack, in conjunction with a scene select[...]

En 82 Y ou can change the settings of the sound programs and surround decoders using the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “S ound Program” and pres s ENTER. 3 Use the cursor keys ( / ) to select a sound pr ogram to be configured and press the cursor ke y ( ). • Y ou can still s witch the sound program by using cur[...]

En 83 Sou nd P ro gr am m en u i te ms • Av ailab le items vary depending on the selected sound program or surround decoder. ■ Settings f or sound programs The following items are available when you select “2ch Stereo” or “7ch Stereo”. • Av ailable items in “7ch Stereo” v ary depending on the speaker system being used. Item Functi[...]

En 84 ■ Settings f or decoders The following items are available when you set “Decode T ype” of “Surround Decoder” to “PLIIx Music” or “Neo:6 Music”. Decode T ype Item Function Settings PLIIx Mus ic Panorama Adjusts the broadening effect of the fr ont sound field. Off (default) , On Select “On” to wrap front right/left channel[...]

En 85 Y ou can configure the various functions of this unit using the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “Setup” and press ENTER. 3 Use the cursor keys ( / ) to s elect a menu. 4 Use the cursor keys (/) to select an item and press ENTER. • T o return to the previous screen during menu operations, press RETURN. 5 Use[...]

En 86 Setu p me nu it e ms Menu Item Function Pag e Speaker Auto Setup Optimizes th e speaker setting s automatically (Y P AO). 35 Manual Setup P ower Amp Assign Selects a speaker system. 88 Configuration Front Selects the size of the fro nt speakers. 88 Cente r Selects whether or not a center speaker is connected and i ts size. 88 Surround Selects[...]

En 87 Multi Zone Zone2 Set Max V olume Sets the Zone2 maximum volume so that sound is not too loud. 95 Initial V olum e Sets the Zone2 initial volume for when this unit is turned on. 95 Zone Rename Changes the zone n ames displayed on the TV scr een. 95 Function Auto P ower Down Sets the amount of time for auto-standby . 96 Display Set Front P anel[...]

En 88 Speaker (Manual Setup ) Configures the speaker settings manually . ■ P ower Amp Assign Selects a speaker system. In addition to the 5.1- or 7.1-channel sp eak er system, various sp eaker configurations are possible using the presence speaker s, Zone2 speakers or bi-amp connection. Settings ■ Co nfigura tion Configures the output character[...]

En 89 ❑ Surround Back Selects whether or not surround back speakers are connected and its size. Settings ❑ F ront P resence Selects whether or not presence speakers are connected. Settings ❑ Subw oofer Selects whether or not subwoofer is connected and its phase. Settings • When the bass sound is lacking or unclear , switch the subwoof er ph[...]

En 90 ■ Level Adjusts the volume of each speaker . Choices Front L, Fr ont R, Center , Surr ound L, Surro und R, Surround Back L, Surround Back R, Fr ont Presence L, Fr ont Presen ce R, Subwoofer Setting range -10.0dB ~ +10.0dB (0.5dB steps) Defau lt 0.0dB ■ Para met ri c EQ Adjusts sound quality of tone with an equalizer . ❑ PEQ Select Selec[...]

En 91 Sou nd Configures the audio output settings. ■ Lipsync Adjusts the delay between video and audio output. ❑ Auto Adjusts the delay between video and audio output automatically when a TV that supports an automatic lipsync function is con nected to this unit via HDMI. If necessary , you can fine-adjust the audio output ti ming. “Offset” [...]

En 92 Vi de o Configures the video output settings. ■ Analog to Ana log Con version Enables/disables the video conve rsion (p .118) between the analog video jacks (COMPONENT VIDEO and VIDEO). Settings • This unit does not convert 480-line and 576-line video signals interchangeably . • 480p/576p-, 1080i- and 720p-resolution video signals canno[...]

En 93 HDMI Configures the settings related to HDMI. ■ HDMI C ontrol Enables/disables HDMI Control (p.119). Settings • T o use HDMI control, you need to perf orm the HDMI Control link setup (p.119) after connecting HDMI Control-compatible devices . ❑ TV Audio Input Selects an audio input jack of this unit to be used for TV audio input when “[...]

En 94 ■ Standby Through Select whether to output videos/audio (input through HDMI jacks) to the TV when this unit is in standby mode. Settings • This setting is av ailable only when “HDMI Control” is set to “Off ”. Network Configures the network settings. ■ IP A ddress Configures the network parameters (IP address, etc). ❑ DHCP Sele[...]

En 95 Multi Zone Configures the multi zone settings. ■ Zo ne2 Set Configures the audio output settings for Zone2. • The “Zone2 Set” settings are availab le only when “P ower Amp Assign” (p .88) is set to “7ch+1ZONE” ❑ Max V olume Sets the Zone2 maximum volume so that sound is not too loud. Setting range -30.0dB ~ +15.0dB (5.0dB st[...]

En 96 Fu nc t io n Configures the functions that make this unit easier to use. ■ Auto Power D own Sets the amount of time for auto-standby . If y ou do not op erate this unit for the specified time, this unit will automatical ly go into standby mode. Settings Defau lt U.K. and E ur ope models: 8 Hours Other models: Off ■ Display Set Configures [...]

En 97 ■ Tr i g g e r O u t p u t Sets the TRIGGER OUT jack to funct ion synchr onized with power status of each zone or input switching. ❑ Tr i g g e r M o d e Specifies the condition for the TRIGGER OUT jack to func tion. Settings ❑ Ta r g e t Z o n e Specifies the zone with which the TR IGGER OUT jack function s synchr onized. Settings ❑ [...]

En 98 Language Select an on-screen menu language. Settings • The information on the front display is provided in English only . Y ou can view informatio n about this unit using the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “Information” and press ENTER. 3 Use the cursor keys ( / ) to select an inf ormation type. 4 T o exit[...]

En 99 T ypes of information ■ A udio Signal Displays information about the current audio signal. • Even when this unit is set to output bitstream signals directly , the signal may be conv erted depen ding on the specifications and settings of the playback de vice. ■ V i deo Signal Displays information about the current video signal. ■ HDMI [...]

En 100 Y ou can configure the system settings of this unit using the front display . 1 Set this unit to standby mode. 2 While holding do wn STRAIGHT on the f ont panel, pre ss MAIN ZONE . 3 Press PROGRAM to select an item. 4 Press STRAIGHT to select a setting. 5 Press MAIN ZONE to set this unit to standb y mode and turn it on again. The new sett in[...]

En 101 ■ Changing the remote contr ol ID of the remote control Perfor m each of the following steps within 1 minute. Otherwise, the setting will be automatically canceled. 1 Press CODE SET on th e remote control using a pointed object such as the tip of a ballpoint pe n. 2 Press SOURCE/RECEIVER . 3 Use the numeric keys to ent er “5019” (ID1) [...]

En 102 Updating the firm ware (UPD A TE) New firmware will be releas ed irregularly for the purpose o f additional featur es or product improvements. It can be downloaded from our website. If this unit is connected to the Internet, you can download the firmware via the network. For details, refer to the information supplied w ith updates. ■ F irm[...]

En 103 SCENE VOLUME SUR. DECODE STRAIGHT ENHANCER SLEEP PURE DIRECT HDMI AV 1234 V- AUX 5 FM INFO MEMORY AM PRESET MOVIE MUSIC CD RADIO MUTE 78 56 90 10 1234 MODE ENT TV TV VOL TV CH POP-UP MENU DISPLA Y SOURCE MAIN ZONE 2 RECEIVER CODE SET INPUT MUTE DOCK AUDIO OPTION 5 1234 6 TUNER NET USB TUNING PHONO S CENE VOLUME S UR. DECOD E S TRAIGHT ENHANC[...]

En 104 S CENE RETURN VOLUME S UR. DECODE S TRAIGHT ENHANCER S LEEP PURE DIRECT HDMI AV 12 3 4 V- AUX 5 FM INFO MEMORY AM PRE S ET MOVIE MU S IC BD DVD TV CD RADIO MUTE ENTER 78 56 90 10 12 3 4 MODE ENT TV TV VOL TV CH TOP MENU POP-UP MENU DI S PLA Y S OURCE MAIN ZONE 2 RECEIVER CODE S ET INPUT MUTE DOCK AUDIO OPTION ON S CREEN 5 12 3 4 6 TUNER NET [...]

En 105 Resetting remote control c odes Y ou can clear all remote control codes and r estore the default settings. 1 Press CODE SET using a pointed object such as the tip of a ballpoint pe n. SOURCE/RECEIVER blinks twice. P erf or m each of the f ollo wing st eps within 1 minute . Otherwise, the setting will be ca nceled. In this case, repeat from s[...]

En 106 If this unit is connecte d to the Internet, the corresponding message will be displayed on the TV when a newer firm war e is available. In this case, follow the procedure below to update the firmware of this unit. • Y ou ca n also update the firmware using the USB memor y de vice from the “AD V ANCED SETUP” menu (p.102). If the followi[...]

En 107 APPENDIX The new spea ker sy stem does not pr ovide an ideal sound balance ... If you have changed sp eakers or speaker s ystem, use “Auto Setup” to optimize the speaker settings again (p .35). If you want to adjust the speaker settings manually , use “Manual Setup” in the “Setup” menu (p.88). Since w e hav e small children, w e [...]

En 108 Refer to the table below when this unit does no t function pr operly . If the problem you are experiencing is not listed below , or if the instructions below do not help, tur n off this unit, disconnect the power cable, and contact the nearest authorized Y amaha dealer or service center . First , check the follo wings: a T he pow er cables o[...]

En 109 Aud io Problem Cause Remed y No sound. Another input source is select ed. Select an appropriate inpu t source with the input selection keys Signals that this unit cannot repr oduce ar e being input. Some digital audio formats cannot be played back on this unit. T o check the audio format of the input signal, use “Audio Signal” in the “[...]

En 110 Vi de o No sound fr om the TV (w hen HDMI Control is used). (If the TV is connected to this unit with an audio cabl e) The TV audio input setting does not match the actual connection. Use “TV Audio Input” in the “Setup” menu to selec t the correct audio input jack (p.93). (If you are trying to use ARC) ARC is disabled on this unit or[...]

En 111 FM/AM r adio USB and netw ork Problem Cause Remed y FM radio reception is weak or noisy . There is multi-path int erference. Adjust the FM antenna height or orientation , or place it in a differ ent location. Y our area is too far fr om the FM station transmitte r . Press MODE to sel ect monaural F M radio rece ption (p.47). Use an outdoor F[...]

En 112 Remote control The files i n the PC cannot be view ed or pla yed bac k. The files are not supported by this unit or the media server . Use the file format supported by both this unit and t he media server . For infor mation about t he file form ats suppor ted by this unit, see “Pla ying back music stored o n PCs” (p.62). The Internet rad[...]

En 113 Error indications on the front displa y Messag e (alphabetic al or der) Cause Remed y Access denied Access to the PC is denied. Configure t he sharing setting and se lect this unit as a device to which musi c contents ar e shared (p .62). Access err or This unit cannot access the USB device. T urn of f this uni t and re c onnect your USB dev[...]

En 114 Use this diagram as guide. Y ou do not need to adjust the speaker layout to the following diagram exactly . Ideal speaker la y out 60° 60° 80° 80° 30 cm or more 1.8 m 0.5 to 1 m Turn it slightly inward to reduce wall reflections. Front speaker (L) Front speaker (R) Center speaker Surround speaker (L) Surround speaker (R) Presence speaker[...]

En 115 Aud io i nfor mati on Audio and video synchr onization (Lipsync) Lip sync, an abbreviati on for lip synchronization, i s a technical term that involves both a problem, and the capabilit y of maintaining audio and video signals synchroni zed during post-production and trans mission. Whereas the audio and video l atency requires complex end-us[...]

En 116 DTS Digital Surround DTS Digital Su rround w as developed to replace t he analog soundtracks of movies wit h a 5.1-channel digital s ound track, and is now rapidly gaining populari ty in movie theaters around the world. DTS, I nc. has developed a home theater system so that you can enjoy the depth of sound and nat ural spatial representation[...]

En 117 Vi de o i n fo rm a ti o n Component video signal With the component vi deo signal system, the vi deo signal is separated into the Y signal for luminance and the Pb and Pr signals f or chrominance. Color can be reproduced more faithfully with thi s system because each of these sign als is independent. The component signal is also called t he[...]

En 118 Vi de o s i gn a l f l ow Video signals input from a video device to this unit are output to a TV as shown below . (solid line) is always av ailable. (dotted line) is available only when “Analo g to Analog Co nversion” (p.92) in the “Setup” menu is set to “On” (default). (S VIDEO is only available for U.K. and Europe models) ■ [...]

En 119 HDMI C ontrol HDMI Control allows you to operate exter nal devices via HDMI. If you connect a TV that supports HDMI Control to this unit with an HDMI cable, you can contr ol this unit (power , volume, etc.) in conjunction with TV remo te control operations. Y ou can also control playback devices (HDMI Control-compatible BD/DVD players, etc.)[...]

En 120 HDMI signal c ompa tibility Audio signals Vid e o si gn al s This unit is compatible with the vide o signals of the following resolutions: - 480i/60 Hz - 720p/60 Hz, 50 Hz - 576i/50 Hz - 1080i/60 Hz, 50 Hz - 480p/60 Hz - 1080p/60 Hz, 50 Hz, 24 Hz - 576p/50 Hz • When CPPM copy-protected D VD-Audio is pla yed bac k, video/audio signals ma y [...]

En 121 (U.K. and Europe models) Refer ence diagr am (rear panel) COMPONENT VIDEO VIDEO +12V 0.1A MAX. TRIGGER OUT DOCK NETWORK PHONO GND S VIDEO FM AM 75Ω ANTENNA P R P B Y P R P B Y AUDIO 2 AUDIO 1 AV 6 AV 5 AV 4 AV 3 ( CD )( TV ) VIDEO AV 2 AV 1 COAXIAL OPTICAL COAXIAL OPTICAL AV OUT COMPONENT VIDEO R L R L HDMI OUT ARC HDMI 1 (BD/DVD) HDMI 2 HD[...]

En 122 Manufactured under license from Dolby Laboratori es. Dolby , Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #’ s: 5,451,942; 5,956, 674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7, 392,195; 7,272,567 & other U.S. and worldwide patent s issued[...]

En 123 Input jacks • Analog Audio [U.S.A. and Canada models] Audio x 5 (A V5~ 6, AUDIO1~2, V -AUX) [Other models] Audio x 6 (A V5~ 6, AUDIO1~2, PHONO, V -AUX) • Digital Audio (Suppor t fs: 32 kHz to 96 kHz) Optical x 2 (A V1, A V4) Coaxial x 2 (A V2, A V3) •V i d e o Composite x 5 (A V3~6, V -AUX) S-Video x 1 (A V5) [U.K. and Europe models] C[...]

En 124 Aud io S ect ion • Rated Output Power (20 Hz to 20 kHz, 0.09% THD, 8 Ω ) Front L/R .. .................. ..................... .................. ...... 90 W+90 W (1 kHz, 0.9% THD, 8 Ω ) Front L/R ..... ......... .......... ........ .......... 125 W/ch (105 W+1 05 W) Center .......... ........ .......... .......... ......... ........ ...[...]

En 125 FM S ect ion • T uning Range [U.S.A. and Canada models] .......... .... 87.5 MHz to 107.9 MHz [Asia and General models] ......... ..................... ......... 87.5/8 7.50 MHz to 108. 0/108.00 MHz [Other mode ls]................ ................. 87.50 MHz to 108.00 MH z • 50 dB Quiet Sensitivity (IHF , 1 kHz, 100% MOD.) Mono ........ [...]

© 2011 Yamaha Corporation YD458C0/OMEN3[...]