Zanussi FJ 1094 G Bedienungsanleitung

W ASHING MA CHINE FJ 1094 G 1000 QUICK WASH ON-OFF RINSE HOLD INS TRUCTION BOOKLE T 124983292[...]

2 Y our New W ashing Machine i Y our new washing machine, fitted with the Zanussi “JET SYSTEM”, meets all modern needs for ef fective treatment of laundry with low water , energy and deter gent consumption. Even small loads are washed “economically” because the amount of water used is r egulated automatically according to the load and type [...]

Install a tion ■ This appliance is heavy . Care should be taken when moving it. ■ It is dangerous to alter the specifications or attempt to modify this product in any way . ■ All packing and transit bolts must be remov ed before use. Serious damage can occur to the product and to property if this is not adhered to. See relev ant section in in[...]

4 Contents F or the User Y our New W ashing Machine 2 Important Safety Information 3 Description of the Appliance 5 Door locked light 5 Detergent dispenser drawer 5 The Control Panel 6 Operating sequence 7-10 W ashing 4.5 kg of withe cotton a t 95°C 7 Load the laundry 7 Measure out the detergent 7 Measure out the fabric softener 7 Select the requi[...]

5 Description of the Appliance 1 Detergent dispenser drawer 2 Programme guide 3 “Options” buttons 4 “ON/OFF” button 5 “Mains-on” light 6 Programme selector dial 7 Door locked light 8 Door opening handle 9 Filter 10 Adjustable feet Door lock ed light The door stays locked throughout the wash c ycle, which is indicated by a light located [...]

6 The Contr ol Panel 1000 RINSE HOLD 12 3 4 5 6 ON-OFF QUICK WASH 4 ON/OFF button By depressing this button the machine starts operating. When depressing it again, the machine stops. 5 Mains-on light This light illuminates when the machine starts working and goes out when the ON/OFF button is released. 6 Pr ogr amme selector dial W ith the programm[...]

7 Operating Sequence Before the first w ash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remov e any manuf acturing residue from the drum and tub . Pour 1/2 a measure of detergent into the dispenser drawer and start the machine. W ASHING 4.5 KG OF WHITE CO TTON A T 95°C Suppose you hav e 4.5 kg of norm[...]

8 5. Select the r equir ed pr ogr amme T urn the programme selector dial clockwise to the required programme. 6. Star t the machine Before starting up the machine check that: ■ the appliance is plugged in ■ the water supply taps are turned on ■ the drain hose is correctly and securely positioned ■ the door and the detergent dispenser dra we[...]

9 P0004 P0226 RINSE HOLD ON-OFF QUICK WASH W ASHING 2 KG OF SYNTHETIC F ABRICS A T 40°C Suppose you hav e 2 kg of synthetic fabric laundry to wash. They are rather delicate f abrics and should not be washed at a high temperature. 1. Load the laundr y Open the door by pulling the catch outward. Place the laundry in the drum, one item at a time, sha[...]

10 5. Select the r equir ed pr ogr amme T urn the programme selector dial clockwise to the required programme. 6. Star t the machine Before starting up the machine check that: ■ the appliance is plugged in ■ the water supply taps are turned on ■ the drain hose is correctly and securely positioned ■ the door and the detergent dispenser drawe[...]

11 W ashing Hints i Do NO T overload the machine. W eigh the laundry the first fe w times you use the appliance. The av erage weights of the most common items are listed below as a guide: 1000g = 1 kg Sheet 700-1000 g Pillow case 100-200 g T ablecloth 400-500 g Serviette 50-100 g T ea to wel 70-120 g Linen hand towel 100-150 g T owelling hand to we[...]

12 And in which f orm? Not only are there different types of deter gent, b ut they are also av ailable in different forms. Whether you chose a po wder or liquid in traditional or compact form is to o wn personal choice. TRADITIONAL POWDERS Pour the powder directly into the dispenser dra wer . Do not sprinkle powder onto clothes in the machine drum.[...]

13 W ash Car e Symbols W ash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the cor rect programme on your washing machine. W ASHING SYMBOL BLEA CHING IR ONING DR Y CLEANING TUMBLE DR Y[...]

14 W ashing Pr ogrammes Degree of soil and type of laundry Description W ash programme Programme dial position PREW ASH ONL Y Possible option Max. load SPIN 1000 NON- F AST COLOUREDS F AST COLOUREDS BOIL W ASH Heavily soiled items except w ool Fast coloured cotton or linen fabrics, shirts, underwear , towels. Non fast coloured cotton or linen fabri[...]

15 W ashing Pr ogrammes Degree of soil and type of laundry Description W ash programme Programme dial position MIXED F ABRICS Possible option SPIN 650 WOOL DELICA TES/ SYNTHETICS MIXED F ABRICS Synthetic or mixed fabrics, underwear , coloured garments, non-shrink shirts, blouses. Synthetic or mixed fabrics, underwear , coloured garments, non-shrink[...]

16 Maintenance and Cleaning Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply . Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening po wder in the machine. Do this separately from any laundry w ashing, and according to the softening [...]

17 Cleaning the filter The water drain filter A clean filter is important for the correct functioning of the machine, and should therefore be cleaned after ev ery washing programme. Open the filter door and place a container underneath to catch any spillage. If the filter is block ed and the machine is unable to drain you will need to drain the wat[...]

18 Something Not W orking Certain problems are due to lack of simple maintenance or oversights, which can be solv ed easily without calling out an engineer . Before contacting your local Service Force Centre, please carry out the checks listed belo w . Symptom The machine does not start Possible causes ■ The door has not been closed. ■ The plug[...]

19 Symptom The door will not open Possible causes ■ The programme is still running. ■ The door lock has not yet released (door pilot light on). ■ W ater in the tub: the door cannot be opened if water is present in the tu b . Spinning starts late or the machine does not spin ■ The electronic unbalance detection d e vice has cut in because th[...]

20 Peace of Mind for Twelve Months Standar d guar antee conditions W e, Zanussi Limited undertake that if, within 12 months of the date of the purchase, this Zanussi appliance or any part thereof is pro ved to be defecti ve by reason only of faulty workmanship or materials, we will, at our option, repair or replace the same FREE OF ANY CHARGE for l[...]

21 Installation Instructions T echnical Specifications It is dangerous to alter the specifications or attempt to modify this product in any way . Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or co[...]

22 P0233 2 1 P0255 P0234 P0020 P0256 Unpacking Before starting the machine up, the packing must be remov ed as follo ws. Y ou are advised to keep all the packaging for re-use in case the machine is to be transported again. Using a spanner unscrew and remo ve the rear right bolt. Lay the machine gently on its back, making sure that the hoses are not[...]

23 W ater inlet The inlets on the back of the appliance are colour coded, blue for cold and red for hot. Before connecting the hoses be sure to fit the mesh filters «A» supplied as per diagram. If only a cold water supply is a vailable, connect the two hoses to a cold water outlet by means of a «Y» connection piece. Installation should comply w[...]

24 Important Before connecting up the machine to new pipe work or to pipew ork that has not been used for some time, run of f a reasonable amount of water to flush out any debris that may hav e collected in the pipes. Le v elling Le vel the washing machine by raising or lo wering the feet. The feet may be tight to adjust as they incorporate a self [...]

25 Electrical connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. W ARNING: THIS APPLIANCE MUST BE EAR THED. The manufacturer declines any liability should this safety measure not be observed. Before switching on, make sure the electricity supply voltage is the same[...]

Z[...]