Zanussi ZWG 5140 P Bedienungsanleitung

EN User manual Washing Machine ZWG 5120 P ZWG 5140 P[...]

Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Frost precaution _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 First use _ _ _ _ _ _ [...]

• Install the appliance on a flat hard floor. • Never pl ace cardboard, wood or si milar materi als un- der the appl iance to compens ate for any unevenness in the floor. • If the appliance is situated on a carpeted floor, please adjust the feet in order to allow air to c irculate freely under the app liance. • Check that the applia nce doe[...]

To activate this de vice, ro- tate the bu tton (without pressing it) insi de the door clockwise until the groove is horizontal. If necessary use a coi n. To disable this device and restore the poss ibili- ty of closing the door, ro - tate the button anti-clock - wise until the groove is vertical. Frost precaution If the applianc e is installed in a[...]

This means that they can be recy cled by disposing of them properl y in appropri ate collecti on containers . Ecolog ical hin ts To save water, energy and to help protec t the environ- ment, we recommend that y ou follow these tips: • Normally soiled laundry ma y be washed without pre- washing in order to save detergent, water and time (the envir[...]

Water supply pressure Minimum Maximum 0,05 MPa 0,8 MPa Maximum Load Cotton 6 k g Spin Speed Maximum 1200 rpm (ZWG 5120P) 1400 rpm (ZWG5140P) Installation Unpacking Warning! • Read carefully the "Saf ety information" chap - ter before installing the a ppliance. x 3 x 3 x 2 x 1 B A C Warning! Remov e and keep all transit devices so that t[...]

• Remove th e power suppl y cable and the draining and inlet hose from the hos e holders ( C ) on the rear of the appliance. • Unscrew the three bolts ( A ) and remove the h ose holders ( C ). • Slide out the relevant plas tic spacers ( B ). • Plug the smaller upper hole and the two la rge ones with the co rresponding plastic plug caps. Pos[...]

Accurate leve lling prevents vibration, noise and dis - placement o f the applianc e during operat ion. Repeat the le velling action, if the applia nce is not lev- el and stab le. Water inlet Connect the hose to a tap with a 3/4” thread. 35° 45° Loosen the ring nut to angle the hose to the left or right depending on the position of your wate r [...]

The drain ho se may be exten ded to a maximum of 4 metres. An additional drain hose and joining piece is availa ble from your Local Centre . Connections overview 115 cm 140 cm m c 150 m c 100 max 100 cm min. 60 cm max 100 cm min. 60 cm m c 9 0 m c 115 Electrical connection • The applia nce must b e earthed. • Make su re that the el ectric al in[...]

Daily use Sort out the laundry Follow the wash code sy mbols on each garment label and the manufa cturer’s wash ing instruct ions. Sort the laundry as follows: whites, co loureds, sy nthetics, de li- cates, woo llens. Before Loading The Laundry Important! Make sure that no metal objects are left in the laundry (e.g. hair clips, saf ety pins, pin [...]

Close the door gently Warning! Make sure that any fab - rics were not trapped when closing the door. Detergents and additives Good washing results also depend on the choic e of de- tergent and use of the c orrect quantities to a void waste and protect the environment . Although biodegradable, d etergents contain substance s which, in large quantiti[...]

• Remove th e drawer. Push the drawer edge out- wards wher e indicated b y the arrow (PUSH) to fa- cilita te drawer remo val. The flap is down and you wish to use powder detergent: • Rotate the flap up- wards. Ensure to fit the flap completely in. • Carefully put the draw- er back. • Measure out the de ter- gent. • Pour the powder dete r-[...]

30° 60° 40° 90° 20° 4H 1400 900 700 8H Einde Fin Extra spoelen Rinçage plus l e t s t i u t r a t S é r é f f i d t r a p é D e z u a P / t r a t S e s u a P / t r a p é D Hoofdwas Lavage l e n s r e p u S e d i p a R n e r e g u f i r t n e C e g a r o s s E Mix Synthetisch Synthétique Fijne was Délicats Wol / Laine Handwas Lavage à l[...]

3 1400 900 700 n e r e g u f i r t n e C e g a r o s s E Spin Reduction By selecting a programme, the ap pliance propo ses automatic ally the max- imum spin speed provid ed for that programme. Press this button repeatedly to chan ge the spin speed, if you want your laundry to be spun at a different sp eed. The relevant light illuminates. Rinse Hold[...]

Extra Rinse l e t s t i u t r a t S é r é f f i d t r a p é D l e n s r e p u S e d i p a R This appliance is designed for saving water. H owever, for people w ith very delicate s kin (allergic to deterg ents) it ma y be necessary to rins e the laundry using an extra quantity of wa ter. Press simult aneously the bu ttons 4 and 5 for some seconds[...]

• Turn the programme selector dial to . • Select the draining or spinning programme. • Reduce t he spin speed if needed, by pr essing the re l- evant butto n. • Press th e button 6 . At the end of the programme , the door can be now opened. Turn the prog ramme selector dial to to switch the appliance off. Remove the laundry from the drum an[...]

Programme - Maximum a nd Minimum Temp erature - Cycle D e- scription - M aximum Spin Spe ed - Maximum Fabrics L oad - Type of Laundry Options Detergent C om- partment SYNTHETICS 60° - (Cold) Main wash - Rinses - Ma ximum spin speed: 1200 rpm for ZWG5120P - 900 rpm forZWG5140 P Max. load 3 kg - Reduced load 1, 5 kg 1) Synthetic or mixed fabrics : u[...]

Programme - Maximu m and Minimum Temp erature - Cycle De- scriptio n - Maximum Spin Spe ed - Maximum Fabrics L oad - Type of Laundry Options Detergent C om- partment DRAIN Draining of water For emptying out the w ater left in the drum. SPIN Drain and long spin at max imum spin speed : 1200 rpm for ZWG5120P- 1400 rpm for ZWG5140P Max. load 6 kg For [...]

Consumption values Programme Energy consumption (KWh) Water consumption (litres) Progra mme duration (Mi- nutes) White Cottons 90° 2.10 78 175 Cottons 60° 1.20 72 170 Cotton ECO 60° 1) 1.02 49 180 Cottons 40° 0.75 72 145 Synthetics 40° 0.60 57 95 Delicate s 40° 0.60 65 75 Wool/ Handwas h 30° 0.30 48 55 1) «Cottons Eco» at 60°C with a load[...]

• Use a stiff brush to clea n and remove all w ashing powder re sidue. • Clean al l the removed parts of the d ispenser draw- er under a ta p to remove any t races of ac cumulated powder. • Use the previous brush to clean the re- cess, ensuring that up- per and lower part of it is well cleaned. After havi ng cleaned t he dispenser and the dra[...]

The filter is inserted corre c tly when the indicator on its top is visible and blocked. • close the filter cover; • insert t he mains plug again. Cleaning the water inlet filters Important! If the appliance doesn't fill, it take s a long time to fill with water, the starting button flashes red or the displ ay (if avail able) shows th e re[...]

Fault code and malfunc tion Possible cause / Solution Einde Fin Extra spoelen Rinçage plus e z u a P / t r a t S e s u a P / t r a p é D Hoofdwas Lavage The light of button 6 flashes and the light 7.1 illuminates: Problem with t he water supply The water tap is closed. • Open the wa ter tap. The inlet hose is squashed or kinked. • Check the i[...]

The appliance doe s not start or stops during operation without an y visible ala rm. Before contacting y our local Service Centre , please car- ry out the ch ecks list ed below. Malfunction Possible cause / S olution The appliance does not start: The plug is n ot properly inserted in the power socket . • Inser t the plu g into t he power so cket.[...]

Malfunction Possible cause / S olution The applianc e vibrates no isi- ly: The transit bolts and packin g have not b een remove d. • Check the c orrect insta llation of the appliance. The appliance is not levelled correctly. • Adjust the feet. The laundr y is not evenl y distribut ed in the drum . • Redistribute the laundry . Maybe there is v[...]

The necessar y data for the service centre is on the rat- ing plate. We recommend that y ou write the data he re: Mod. ... ... ... Pr od. No. ... ... ... Ser . No. ... ... ... Mo d . .. . ... .. . Prod. N o . .. . ... . . S e r . No . ... .. . ... Model descr iption (MOD.) .............. ................ . Product number (PNC) .............. ......[...]

26[...]

27[...]

www.zanussi.com/shop 132 943 200 - 00 - 252010[...]