Zonet ZSR0104UP Bedienungsanleitung

B ROADBAND F IREWALL R OUTER WITH 1-USB + 1-P ARALLEL P RINT S ERVER P ORT U SER ’ S M ANUAL V1.0 Trademarks[...]

Windows 95/98/Me and Windows NT/2000/XP are registered trademarks of Microsoft Corporation. All other br ands and product names are tradem arks of their respective companies. Copyright No part of this publication ma y be reproduced in any form or by any means or used to make any derivative (such as translation, transforma tion or adaptation) withou[...]

Table of Contents 1. INTRODUCTION ............................................................................................................................. 1 P RODUCT O VERVIEW .......................................................................................................................... 1 M AIN B ENEFITS ............................[...]

W INDOWS SMB P RINTING ............................................................................................................... 35 6.FIREWALL CONFIGURATION ................................................................................................... 38 O VERVIEW ..........................................................................[...]

1. Introduction Product Overview Congratulations on your purchase of this Broadband Firewall Router. During the design process, we have given much thought to making th is device as convenient to use as possible. The end result is the Broadband Firewall Router that can be set up in minutes, allowing network users to access the Internet via ei ther t[...]

 One User’s Manual or CD (including quick guide) Network Software Requirements The Broadband Firewall Router requires one of the following types of software:  Windows 95/98/Me or Windows NT/2000/XP  Any TCP/IP-enabled systems like Mac OS and UNIX Broadband Firewall Router Embedded 4-port 10/100Mbps Switch The Broadband Firewall Router wi[...]

 One external DSL modem with an RJ-45 (LAN) interface  One external Cable modem with an RJ-45 (LAN) interface 3[...]

2. Hardware Inst allation Overview This chapter details the step- by-step procedure required for correct installation of the Broadband Firewall Router hardware. Topics discussed in this chapter include connecting and disconnecting the Broadband Firewall Router to and from the modem, the network, and the power unit. Preparation The following items a[...]

Connecting Broadband Firewall Router to the Network 1. Connect one end of the UTP cabl e to the Broadband Firewall Router. 2. Connect the other end of the UTP cable to any network computer. 3. The connection is complete. Connecting the AC Power Adapter 1. Connect the power adapter to the Broadband Firewall Router’s AC power adapter jack. 2. Plug [...]

3. Getting S tarted Overview Configuring the Broadband Firewall Router for the first time can be done using the following method: To configure the Broadband Firewall R outer uses the web browser. Note: The configuration procedures described in this chapter are for basic setup purposes only. Preparation 1. In general, using a Broadband Firewall Rout[...]

Setting up the Broadband Firewall Router using the Web browser Overview We’ve designed an easy-to-use web-based configur ation interface in t he device. Users can set up the device by using the web browse r. Furthermore, the enhanced HTTP support available in the device includes a quick and easy management tool for performing the configuration ta[...]

6. It then enters the Broadband Fi rewall Router main setup menu as shown in the following figure. 7. Click the Connection Setup , and the following box will appear. 8. Choose either DSL or Cable modem as your connection method. 9. Complete the following settings: (The example shown is for DSL fixed IP) Choose “ Static IP ” page, and the follow[...]

Configuring Windows 95/98/Me or Windows NT/2000/XP (DHCP-capable) Computers Each PC that supports DHCP and is located on your LAN must be configured so it can communicate with the Broadband Firewall Router. Follo w these steps to configure the reset of the PCs on your LAN. (If you want to manually spec ify an IP address and related settings for the[...]

5. Click Obtain an IP address automatically . 6. Click OK . 7. Click OK . 8. Restart your computer . You are now ready to use your Web br owser or other Internet applications. Configuring Broadband Firewall Router in Pre-existing IP Networks The Broadband Firewall Router is easily added to an existing network t hat already has IP addresses assigned[...]

DHCP server to dynamically allocate and assign addresses (since you’ve already assigned IP addresses to each computer). The following steps use an example pre-existi ng network of computers with IP addresses 204.1.1.1 through 204.1.1.154 (IP addresses of Class C, without any IP sub-networks). Please follow the steps listed below to use your exist[...]

7. In the LAN Settings , enter the IP address you se lected in Step 1 (such as 204.1.1.100) in the LAN IP Address field. 8. Enter the subnet mask 255.255.255.0 in the Subnet Mask field. 9. Enter the IP address you selected in Step 1 (such as 204.1.1.100) in the Default Gateway field. 10. Click Apply button for the new settings to take effect. 11. C[...]

Configuring Non-DHCP Computers The Broadband Firewall Router can be used wit h computers that do not support DHCP. Follow these steps to identify and configure non-capable DHCP computers. 1. Determine if any computer s on your network are not DHCP capable. An example of a non-DHCP capable computer w ould be a DOS/Windows 3.x co mputer running an ol[...]

2. Type the current password into Old Password . 3. Type your new password into New Passw ord . 4. Confirm the new password into Re-type New Password . 5. Click “ Apply ”. 6. The password is now set. Setting Date and Time One function of Broadband Firewall Rout er is that it allows you to set the initial time when you install the device. This e[...]

Traffic Report You can view the network traffic report for the Broadband Firewall Router’s WAN port and LAN-to-Internet. Click the Basic Settings button in the top column, and then choose “ Traffic Report ”. The following box will appear. 1. Click “ WAN Port ”, and the box pictured below will appear. Please noted that your web browser hav[...]

 Private IP Address: User’s LAN IP.  Internet Connection: User browses Public IP.  Port No.: User’s service number. Event Log : The Broadband Firewall Router can record all in formation that you want, including “Hacker attack”, “Connection from LAN to WAN”, and “Connection from WAN to LAN”. Use the following procedure to se[...]

Please follow these steps to setup “ Save & Restore CFG ” Setting. A. To “ Save ” setting: Click the “ Save ” button, it saves the current rout er’s setting to a file “CFG.BIN”. B. To “ restore ” setting: i. Click the “ Browse ” button, and select the CFG.BIN file. ii. Then, click the “ Load ” button, to restore th[...]

Note: To load the default values by using the reset button, please see the Appendix . 4. Advanced Configuration Overview Once you've finished the basic setup (in C hapter 3) of the Broadband Firewall Router, the Broadband Firewall Router should be able to func tion properly. This c hapter provides the directions for configuring the Broadband F[...]

Preparation: Connecting to the Broadband Firewall Router In order to proceed with the advanced configuration of t he Broadband Firewall Router, you need to have completed the Broadband Firewall Router ’s basic setup detailed in Chapter 3. 1. Open the web browser in your Windows 95/98/Me or Windows NT/2000/XP computer. 2. Type the default IP addr [...]

3. You can assign a IP address group’s name to include the IP range from “Starting IP Address” to “Ending IP Address”. Service Group : 1. Click Advanced Settings in the top column. Then click Group Setup . 2. Click Service Group , and the following picture will appear. 3. You can assign a service group’s name to include any protocol and[...]

Enable DHCP Server : This option allows you to enabl e or disable the Broadband Firewall Router’s DHCP feature. By default, the DHCP service of the Broadband Firewall Router is enabled . Enable DNS Relay : This option allows you to enable or disable the DNS relay feature in the router inside. Default is disable. Primary DNS IP Address : This opti[...]

A. Insert the IP and MAC address. B. Click “ Add ”. C. The procedure is now completed. IP Lease Range : This option allows you to change the DHCP IP Lease Range. DMZ Setup The DMZ Host can be accessed from the public Internet via the IP address associated with the DSL/Cable service. Please follow these steps to set up the DMZ Host: 1. Click Adv[...]

3. In the Enable Multiple DMZ field, choose “ Yes ”. By default, the DMZ feature of the Broadband Firewall Router is disabled . 4. In the Public (WAN) IP Address field, type the WAN IP that you want. In the Private (LAN) IP Address field, type the LAN IP of the computer you wish to make visible to the public Internet. 5. Click Apply button. 6. [...]

2. Due to the nature of the NAT implemented, only one user at a time can access the same VPN server on the Internet through this device. This means that two private network users cannot access the same VPN server locate on the public Internet simultaneously. 3. For details on setting up a VPN client, pl ease refer to your system’s documentation. [...]

service to a designated host that can process reques ts for a specific Internet service on your LAN. 1. Click Advanced Settings in the top column. Then click Service Setup . 2. Click Local Server Mapping , and the box below will then appear. 3. Select TCP or UDP . 4. Fill in the Public Port Number . 5. Fill in the Private IP Address of the LAN PC?[...]

3. Enable DDNS: You want to use “DDNS”, or not. 4. Type username. 5. Type password. 6. Domain name: It is your domain name. 7. Mail Server’s Domain Name: It is your Mail server name. 8. Use Wildcard: You want to use “wildcard”, or not. 9. Click “Apply”. 【 Note 】 The Broadband Firewall Router only provides to apply for DDNS to www.[...]

TCP/IP Protocol Installation 1. Click Start , point to Settings and select Control Panel . 2. Double click the Network icon. 3. If the TCP/IP Protocol is not already installed, click Add . 4. Select Protocol and click Add . 5. Select Microsoft from the Manufacturers list. 6. Select TCP/IP Protocol from the Network Protocols list. 7. Specify an IP a[...]

3. Click Netw ork Print Server Setup Wizard . 4. Click Next , the wizard will automatically discover the print server. 28[...]

5. Select the print server port t hat you want to configure and click Next . Port 1 for Parallel port and port 2 for USB port. 6. Select No if you don’t want to change the configuration and click Next . 29[...]

7. Choose the printer, which you want to connect. Click Next . 8. Setup program will display the summary of your setting. Click Next . 30[...]

9. Installation complete. Click Finish . Windows NT LPR Port Installation 1. Click Start , point to Settings , and select Printer . 2. Run Add Printer . 31[...]

3. The Add Printer Wizard screen will appear, Select My Computer and click Next . 4. Click Add Port . 5. From the Printer Ports box as show n in the following picture, select the LPR Port . 6. The Add LPR compatible printers box will then appear as shown in the following picture. Type in the router’s IP address in the Name or address of server pr[...]

4. From the type of Create a new port box as shown in the following picture, select the Standard TCP/IP Port , Click Next and Next . 5. The Add Standard TCP/IP Printer Port Wizard box will then appear as shown the picture as below, and type in t he router’s IP address in the Printer Name or IP Address box, and you can change the Port Name (option[...]

6. In the Configure Standard TCP/IP Port Monitor box as shown in the following pi cture, select LPR from Protocol, type in a queue name: lp1 for Parallel Port (Port 1) or lp2 for USB Port (Port 2). 7. Click OK , and Next . Note: Please DO NOT type any other name than lp1, lp2 in this step. 8. Click Finish . 9. Select the appropriate printer manufac[...]

11. A message reading, “To confirm that the printer is installed properly, you can print a test page”. Select Yes (Recommended) and click Next . 12. Click Finish . 13. Done. Windows SMB Printing 1. Click Print Server Setup in the top column, and the following box will appear. 2. Assume your computers use the “ WORKGROUP ” as the SMB workgro[...]

4. Double click it again. 5. Now you have to install the printer’s driver. 6. Choose it from the “Add Printer Wizard”. 36[...]

7. Install printer successfully. 8. Now, you can find your printer’ s icon and use the SMB printing mode. 37[...]

6.Firewall Configuration Overview An Internet firewall allows approved traffic in and out according to a predetermined plan. A firewall is a safeguard security mechanism that provides protection between LAN and WAN. It protects the intranet from intrusion by out sides and hackers, thus providing a secure environment for users. The Broadband Firewal[...]

9. “Allows Broadcast Packets” allows for broadcast packets by-pass. The default is “ Yes ”. 10. “Allows IP Source Routing” could protec t against a hacker using another IP to attack your network. The default is “ No ”. 11. “Enable Remote Web Management to this Router” default is “ No ”. 12. “Respond to Ping Requests” def[...]

Internet (WAN) to LAN Access Rule Broadband Firewall Router could be according to administrator’s request to create WAN to LAN Access Rules. You could follow the procedure to setup it. 1. Click Advanced Settings in the top column. Then click Firewall Setup . 2. Click “ Access Rules ”, and select the direction Internet (WAN)  LAN, then it w[...]

3. If you want to start up the feature, you must choose “ Yes ” in “ Enable URL Blocking ”. The default is “ No ”. 4. Fill in the URL or Key Word that you want to restrict access to. 5. Webpage Content Filtering: A. Active X: Allows or disallows the Active X packet pass-through. B. Java: Allows or disallows the Java packet pass-through.[...]

4. Fill in administrator’s e-mail. 5. Fill in SMTP mail server’s IP address. 6. Click “ Apply ”. 7. The facility is now set up. 42[...]

7. Upgrading the Broadband Firewall Router Overview As new firmware for the Broadband Firewall Router is released in the future, you can upgrade your Broadband Firewall Router. The upgr ade procedure will use the DOS-based TFTP program on Windows NT/2000/XP. For Windows 95/98/Me and NT/2000/XP, we provide user upgrade firmware via your browser. Upg[...]

5. Click the “ Browse ” button, and pick the firmware file. 6. Click the “ Upgrade ” button. 7. The upgrade is now completed. Upgrading the Router on UNIX (using TCP/IP) 1. Log in as root. 2. Ensure that upgrade BIN file is locat ed in your current working directory. 3. Type “ tftp <the Firewall router’s IP address> ”. 4. At the[...]

8. T roubleshooting Problem A IP Address Conflicts If you start up your Windows 95/98/Me or Windows NT/2000/XP computer and the following message dialog box shows — indicating an IP addr ess conflict — please follow the directions given below. Solution Windows 95/98/Me 1. Click Start , point to Run , and type winipcfg . When done, click the Run[...]

4. Click OK. 5. Done. Windows NT/2000/XP 1. At your NT’s DOS prompt, type ipconfig /release and press [ Enter ]. 2. Next, type ipconfig /renew and press [ Enter ]. 3. The conflict should now be resolved. 46[...]

47 Appendix Loading the Default Values Once you have configured the Broadband Firewa ll Router (see Chapters 3 and 4), the configuration settings are saved in the Broadband Firewall Router’s internal memory. However, you can manually reset them to fact ory defaults by using the web browser or by following the steps given below: 1. Power off and o[...]