ZyXEL Communications PLA-491 Bedienungsanleitung

www .zyxel.com PLA-4xx Series Powerline Ethernet Adapter Seri es (PLA-400/400 v2/401/401 v2/ 402 v2/470/470 v2/491) User ’ s Guide V ersion 3.0.5 4/2008 Edition 1[...]

[...]

About This User's Guide PLA-4xx Series User’s Guide 3 About This User's Guide Intended Audience This manual is intended for people who want to configure the PLA -40 0, PLA-400 v2, PLA- 401, PLA401 v2, PLA402 v2, PLA-470, PLA470 v2 an d PLA491 using the PLA-4xx Series Configuration Utility version 3.0. 5(AG). Y ou should have your basic [...]

Document Conventions PLA-4xx Series User’s Guide 4 Document Conventions W arnings and Notes These are how warnings and notes are shown in this User ’ s Guide. 1 W arnings tell you about things that could harm you or your device. " Notes tell you other important informati on (for example, other things you may need to configure or helpful ti[...]

Document Conventions PLA-4xx Series User’s Guide 5 Icons Used in Figures Figures in this User ’ s Guide may use the fo llowing generic icons. Th e PLA-4xx icons used may not be an exact represe ntation of your devic e. PLA-4xx Computer Notebook computer[...]

Safety Warnings PLA-4xx Series User’s Guide 6 Safety Warnings 1 For your safety , be sure to read and follow all warni ng notices and instructions. • Do NOT use this product near water , for example, in a wet basement or near a swimming pool. • Do NOT expose your device to dampness, dust or corrosive liquids. • Do NOT store thin gs on the d[...]

Safety Warnings PLA-4xx Series User’s Guide 7 PLA-491 models only: • Caution: Use only in dry locations. • Caution: REDUNDANT BONDING CONDUCTOR SHALL BE CONNECTED TO A LOCAL GROUNDING POINT UNLESS THE T OT AL SYSTEM LEAKAGE CURRENT FROM ALL LOADS COMBINED IS VERIFIED TO BE LESS THAN 500 uA. • For continued protect ion against risk of fire ,[...]

Safety Warnings PLA-4xx Series User’s Guide 8[...]

Table of Contents PLA-4xx Series User’s Guide 9 Table of Contents About This User's Guide ........................................... ............................................................. .. 3 Document Conventions.................................................................. ......................................... .4 Safety War[...]

Table of Contents PLA-4xx Series User’s Guide 10 3.1.2 Firmware Detection Procedure . ................ ................. ................... ................ ............. 34 3.2 Firmware Upgrade T ool ......... ................ ................. ................ ................... ................ ........ .. 36 Chapter 4 The ENCR YPT Button ..[...]

Table of Contents PLA-4xx Series User’s Guide 11 Part III: Appendices and In dex ............................ .................................. 77 Appendix A Product S pecifications ............................................................ ............................. 79 Appendix B Legal Information ..........................................[...]

Table of Contents PLA-4xx Series User’s Guide 12[...]

List of Tables PLA-4xx Series User’s Guide 13 List of Tables T able 1 Devices that can cause EMI on the power circuit . ... .... ... ... ... .... ... ... ............. ... ... .... ... ... ... ... .... ... 2 1 T able 2 Password Summary .............. ................ ................ ................ ................ ................. ...... ....[...]

List of Tables PLA-4xx Series User’s Guide 14[...]

List of Figures PLA-4xx Series User’s Guide 15 List of Figures Figure 1 Expand Y our Network with the PLA-4xx ..... .......... ............. ................ ................ ............. ........ .. 19 Figure 2 Expand Y our Network with the PLA402 v2 ov er Coaxial Cable Wiring ............. .................... ... 20 Figure 3 PLA491 Power S tr[...]

List of Figure s PLA-4xx Series User’s Guide 16 Figure 39 Making a New Network with the New Adapte r ...... ................. ................ ................ ................ 60 Figure 40 Local/Remote Adapters on a Powerline Network ........... ................ ................ ................ ....... 61 Figure 41 Adding an Adapter to Y our Ne[...]

17 P ART I Introduction Introducing the P LA-4xx (19) Installing the Utility (25)[...]

18[...]

PLA-4xx Series User’s Guide 19 C HAPTER 1 Introducing the PLA-4xx 1.1 Overview This chapter introduces the ma in applications and features of the PLA-4xx HomePlug A V compliant powerline adapter . See Appendix A on page 79 for detailed product specifications. In this User ’ s Guide the electrical wiring netw ork and coaxial cable network are bo[...]

Chapter 1 Introducing the PLA-4xx PLA-4xx Series User’s Guide 20 1.3 Coaxial Cable Networks with the PLA402 v2 The PLA402 v2 allows you to be more flexib le in expanding y our network by adding the coaxial cable capability . Figure 2 Expand Y our Network with the PLA402 v2 over Coaxial Cable W iring As well as being able to co nnect your PLA402 v[...]

Chapter 1 Introducing the PLA-4xx PLA-4xx Series User’s Guide 21 Figure 3 PLA491 Power S trip " Do not connect a powerline adapter to the PLA491’ s power outlet s. Powerline adapters connected in this way will not function correc tly due to the EMI filter . The table below lists some devices that can ca use EMI on a power circuit. Y ou may[...]

Chapter 1 Introducing the PLA-4xx PLA-4xx Series User’s Guide 22 " This User ’s Guide describes the latest version utility . Th is utility is only compatible with a PLA-4xx wh ich has the latest firmware installed. If you don’t already have them, download the latest firmware and utility from the ZyXEL website. 1.6 Security Since your pow[...]

Chapter 1 Introducing the PLA-4xx PLA-4xx Series User’s Guide 23 W ithout security (encryption) yo ur information is accessible to anyone using a powerline adapter on the same el ectrical circuit. In some cases, a circ uit can be shared by more than one household. T o prevent compromising your network secu rity , you ca n create a private network[...]

Chapter 1 Introducing the PLA-4xx PLA-4xx Series User’s Guide 24[...]

PLA-4xx Series User’s Guide 25 C HAPTER 2 Installing the Utility This chapter guides you through the installation of the configur ation utility for your PLA-4xx. 2.1 Overview of the Inst allation Process The installation of the configur ation utility does the following: 1 Checks for and installs Microsoft’ s .NET Fra mework version 1.1 software[...]

Chapter 2 Installing the Utility PLA-4xx Series User’s Guide 26 Figure 4 .NET Framework Installation Prompt 2 Review Microsoft’ s License Agreement , select I agree and click Install to proceed. Figure 5 Microsoft’ s Agreement 3 The next screen allows you to s ee the progress of the installation.[...]

Chapter 2 Installing the Utility PLA-4xx Series User’s Guide 27 Figure 6 .NET Framework Installation Process 4 Click OK to complete the installation process. Figure 7 Microsoft’ s Agreement 5 The Setup utility runs automatically . Click Ye s or Next to continue through the initial screen. Click Cancel only if you want to abort the installation.[...]

Chapter 2 Installing the Utility PLA-4xx Series User’s Guide 28 6 Fill in the User Name and Company Name fields (optional). If you want the utility to be only available to the curre ntly logged in user , select Only for me(...) . Otherwise, click Next to continue and allow all users to use the configuration utility . Figure 9 Customer Info rmatio[...]

Chapter 2 Installing the Utility PLA-4xx Series User’s Guide 29 Figure 1 1 Restart Screen 9 The following pop-u p appears. Click Ye s to restart your computer , or click No to restart your computer later . " If you select “No, I will re start my computer later”, yo u will not be able to launch the utility until after a re st art of your [...]

Chapter 2 Installing the Utility PLA-4xx Series User’s Guide 30[...]

31 P ART II Managing the PLA- 4xx Firmware T ools (33) The ENCR YP T Button (39) The Configuration Utility (45) Powerline Network Setup T utorial (55) LEDs and T roubleshooting (65)[...]

32[...]

PLA-4xx Series User’s Guide 33 C HAPTER 3 Firmware Tools Use the Firmware Detection T ool and Firmwar e Upgrade T ool to ensure you have the latest firmware (version 3.0.5 or later) on your PLA-4xx(s). Y ou need to upgrade all yo ur PLA-4x xs to the la test firmware to ensure they can connect with each other and they are compatible with the lates[...]

Chapter 3 Firm w are Too ls PLA-4xx Series User’s Guide 34 Figure 12 Firmware Detection With an Early Firmware Local Device This diagram shows the Firmware Detection T ool detecting the firmware on latest firmware devices only , as the local device has the latest firmware. Figure 13 Firmware Detection With a Latest Fir mwar e Local Device 3.1.2 F[...]

Chapter 3 Firm w are Too ls PLA-4xx Series User’s Guide 35 Figure 14 Firmware Detec tio n T ool: St art The T ool shows the firmware version(s) of devi ces it has detected on your pow erline network. Figure 15 Firmware Detection T ool: Result The following table describes the labels in this screen. T able 3 Firmware Detection Tool: Result Screen [...]

Chapter 3 Firm w are Too ls PLA-4xx Series User’s Guide 36 3.2 Firmware Upgrade T ool Use the firmware upgrade tool to upgrade firm ware earlier than versio n 3.0.5 to the latest version firmware on the powerlin e device directly connec ted to your computer . This is necessary as devices with ZyX EL ’ s early version firmware are not compatible[...]

Chapter 3 Firm w are Too ls PLA-4xx Series User’s Guide 37 Figure 17 Firmware Up grade T ool: Up grading 6 If your firmware is successfully upgraded , the following screen appea rs. Click Finish to close the T ool. Figure 18 Firmware Up grade T ool: F inish 7 T o check your firmware is successfully upgraded, run the Firmware Detection Utility aga[...]

Chapter 3 Firm w are Too ls PLA-4xx Series User’s Guide 38[...]

PLA-4xx Series User’s Guide 39 C HAPTER 4 The ENCRYPT Button Use the ENCRYP T button to automatically set up a secure powerline c onnection between your powerline devices. 4.1 ENCR YPT Button Overview The ENCR YP T button allows you to set up a sec ure powerlin e co nn ectio n with other HomePlug A V compliant powerline devices whic h also suppor[...]

Chapter 4 The ENCRYPT Button PLA-4xx Series User’s Guide 40 Figure 19 ENCRYP T Connection Procedure 5 Repeat step 4 in this section for the other powerlin e device you wish to connect. This must be done within 120 seconds of pressing the ENCR YPT button on the PLA-4xx. 6 Check the lights on the two powerline de vices. The power ( ) and HomePlug ([...]

Chapter 4 The ENCRYPT Button PLA-4xx Series User’s Guide 41 Figure 20 Adding More Powerline Adapters to Y our Network 9 If you disconnected y our computer or modem (or any other net w orking product connected to your powerline device) in step 1 of this section, you can now reconnect them. This sets up your powerline network between your powerline[...]

Chapter 4 The ENCRYPT Button PLA-4xx Series User’s Guide 42 2 Click the ENCR YP T button on ( A ) and ( C ) for 1~2 sec onds and within two minute s of each other . 3 W ait for about one minute while ( A ) and ( C ) connec t. 4 Check the LEDs on both ( A ) and ( C ). When the power ( ) and Home Plug ( ) lights stop blinking and the p ower ( ) lig[...]

Chapter 4 The ENCRYPT Button PLA-4xx Series User’s Guide 43 4.4 ENCR YPT Button Behavior The following table summarizes th e actions that occur when the EN CR YP T button is pressed for specific le ngths of time. See T roubleshooting in Chapter 7 o n page 74 for suggestions on problems with the ENCR YPT button and the lights. T able 4 Time ENCRYP[...]

Chapter 4 The ENCRYPT Button PLA-4xx Series User’s Guide 44[...]

PLA-4xx Series User’s Guide 45 C HAPTER 5 The Configuration Utility This chapter shows you how to use the Configuration Utility (or Utility) to secure, manage and set up Quality of Service (QoS) on your powerline network. 5.1 Overview The PLA-4xx is designed as a plu g-a nd-play network expanding so lution. This means that once you complete your [...]

Chapter 5 The Configuration Utility PLA-4xx Series User’s Guide 46 5.1.1 Powerline Network Security When the PLA-4xxs communicate with each ot her , they use encryption to protect the information that is sent in the powerline network. Encryption is like a secret code. If you do not know the secret code, you cannot understa nd the message. The Ho [...]

Chapter 5 The Configuration Utility PLA-4xx Series User’s Guide 47 5.3 Configuration Screen Use the Configuration screen to see which devices are recognized by your powerline network, to configure your P LA-4xx and to set up a secure powerline network by changing the powerline network name. This screen opens up when you launch the utility . "[...]

Chapter 5 The Configuration Utility PLA-4xx Series User’s Guide 48 5.4 Firmware Screen " T o upgrade to the latest firmware, use the firmware upgrade to ol available from the ZyXEL website (www .zyxel.com), or from the CD included with your PLA- 4xx. Make sure you also upgrade the PLA- 4xx Series Configur ation Utility if you do so, as older[...]

Chapter 5 The Configuration Utility PLA-4xx Series User’s Guide 49 Figure 26 Firmware Scre en 5.5 Network Info Screen Use the Network Info screen to see the rate s at which a specific PLA-4xx is communicating with other powerline adapters on yo ur powerline network. Figure 27 Network Info Screen[...]

Chapter 5 The Configuration Utility PLA-4xx Series User’s Guide 50 The following table describes the labels in this screen. 5.6 Advanced Screen " This feature is only available with the latest version utility . Go to the ZyXEL website to download the late st utility and firmware for your ZyXEL HomePlug A V adapter . T able 6 Network Info Scr[...]

Chapter 5 The Configuration Utility PLA-4xx Series User’s Guide 51 Y ou can configure the powerline adapters on your network to give priority to network traf fic depending on its importanc e. When you set the prio rity of a powerline adapter , yo u set h ow quickly messages FROM your powerline adapte r are sent in your powerline network. T ransmi[...]

Chapter 5 The Configuration Utility PLA-4xx Series User’s Guide 52 Figure 28 Priority Settings Use this screen to configure priority settings for traf fic from the power line adapters on your network. Figure 29 Advanced Screen Internet C A B D E[...]

Chapter 5 The Configuration Utility PLA-4xx Series User’s Guide 53 The following table describes the labels in this screen. 5.7 About Screen Use the About screen to view informa tion regarding the configuration utility and firmware version of the PLA-4xx you are connected to. Clic k the icon in the top right corner of the utility to view the Abou[...]

Chapter 5 The Configuration Utility PLA-4xx Series User’s Guide 54 Released This field disp lays the date when the firmware was released. Close Click the button in upper right corner to close the About window . T able 9 About Screen (continued) LABEL DESCRIPTION[...]

PLA-4xx Series User’s Guide 55 C HAPTER 6 Powerline Network Setup Tutorial Use this tutorial to expand your existing powerline network. 6.1 Overview After setting up your first home powerline networ k (instructions for that are in the Quick Start Guide for your ZyXEL powerline adapter) you may want to extend the network or create a new one by add[...]

Chapter 6 Powerline Netw ork Setup T utorial PLA-4xx Series User’s Guide 56 6.1.1 Import ant T erms 6.1.2 Accessing Y our Powerline Adapter 1 Attach the power cord that came in th e package to your powerline adapter . 2 Plug the power cord o f the powerline adapter you want to ad d to your network into a power socket and, if needed, switch the po[...]

Chapter 6 Powerline Network Setup Tutorial PLA-4xx Series User’s Guide 57 Figure 33 Click on the PLA-4xx Series Configuration Utility Icon 6 Y ou are now ready to exten d your power line network or set up a second n e twork. • See Section 6.1.3 on page 57 to add a new powerline adapter to yo ur network. • See Section 6.1.4 on page 59 to set u[...]

Chapter 6 Powerline Netw ork Setup T utorial PLA-4xx Series User’s Guide 58 Figure 35 Adding a New Adapter 3 Select your adapter by selecting Local and type the network name for your existing network in the Network Na me field ( C ). Figure 36 Adding an Adapter to an Existing Network 4 Click Save and click OK on the pop-up. Figure 37 Network Name[...]

Chapter 6 Powerline Network Setup Tutorial PLA-4xx Series User’s Guide 59 6.1.4 Setting Up a New N etwork with a New Adapter This section shows you h ow to use your new powerline adapters to set up a new powerline network separate to your ex isting network. The figure below shows two p owerline networks in a house. The first network ( 1 ) shows t[...]

Chapter 6 Powerline Netw ork Setup T utorial PLA-4xx Series User’s Guide 60 Figure 39 Making a New Network with the New Adapter 3 After you have set up a new network, you ar e ready to connec t each powerline adapter on your new network to devices, for ex ample, a computer or a games console. 6.1.5 Splitting a Network into T wo Networks This sect[...]

Chapter 6 Powerline Network Setup Tutorial PLA-4xx Series User’s Guide 61 Figure 40 Local/Remote Adapters on a Powerline Ne twork 3 T o set up a new powerline network, type the DAK Password and change the Network Name on all powerline adapters you wish to add to your network. • Look for the DAK Password on a label on your powerline adapter . Th[...]

Chapter 6 Powerline Netw ork Setup T utorial PLA-4xx Series User’s Guide 62 Figure 42 Incorrect DAK or No DAK • If you have correctly entered the DAK Password , click OK on the pop-up. Figure 43 Correct DAK 5 The settings for the ad apter will now grey out and the adapter wil l disappear from the table after a few minutes. Figure 44 An Adapter [...]

Chapter 6 Powerline Network Setup Tutorial PLA-4xx Series User’s Guide 63 Figure 45 Adapters on a New Powerline Network • If you want to access any of your new powerline networks using the PLA -4xx Series Configuration Utility , change the Network Name on your local adapter to the network name for the network you want to access. The adapters on[...]

Chapter 6 Powerline Netw ork Setup T utorial PLA-4xx Series User’s Guide 64[...]

PLA-4xx Series User’s Guide 65 C HAPTER 7 LEDs and Troubleshooting This chapter describes the behavior of the LEDs ( lights) and offers some suggestions to solve problems you might encounter . 7.1 LEDs The following sections describes the lights on the PLA-400, PLA-400 v2 a nd PLA402 v2, the PLA-401, PLA401 v2 and the PLA-470. 7.1.1 PLA-401/PLA40[...]

Chapter 7 LEDs and Troubl eshoo ting PLA-4xx Series User’s Guide 66 The following table describes the behavi or of the lights on the PLA-401 v2. HomePlug On The PLA-401 detects another powerline adapte r . Blinking The PLA-401 is communica ting with anoth er powerline adapter . Off The PLA-401 is not detecting anoth er powerline adapter . ETHERNE[...]

Chapter 7 LEDs and Troubleshooting PLA-4xx Series User’s Guide 67 7.1.2 PLA-400/400 v2/402 v2 The following figure is th e front panel of the PLA-400, PLA-400 v2 an d PLA402 v2. Use the lights to determine if your PLA-4xx is behaving normally or if there are some problems on your powerline network. Figure 47 PLA-400/400 v2/ 402 v2 Lights The foll[...]

Chapter 7 LEDs and Troubl eshoo ting PLA-4xx Series User’s Guide 68 7.1.3 PLA-470/PLA470 v2 The following figure is the fro nt panel of the PLA-470 and PLA-470 v2. Use the lights to determine if the PLA-470 or PLA470 v2 is beha ving normally or if there are some problems on your powerline network. Figure 48 PLA-470 and PLA-470 v2 Light s HomePlug[...]

Chapter 7 LEDs and Troubleshooting PLA-4xx Series User’s Guide 69 The following table describes the beha vior of the lights on the PLA-470. The following table describes the behavi or of the lights on the PLA470 v2. T able 14 PLA-470 Lights LIGHT S ICON COLOR STATUS DESCRIPTION POWER Green On The PLA-470 is on and receiving power . It also indica[...]

Chapter 7 LEDs and Troubl eshoo ting PLA-4xx Series User’s Guide 70 7.1.4 PLA491 The following figure is the fro nt panel o f the PLA491. Use th e lights to determine if the PLA491 is behaving normally or if there ar e some problems on your po werline network. Figure 49 PLA491 Lights HomePlug Green On The PLA470 v2 detects another powerline adapt[...]

Chapter 7 LEDs and Troubleshooting PLA-4xx Series User’s Guide 71 The following table describes the beha vior of the lights on the PLA491. 7.2 Power and Light Problems V The PLA-4xx does not turn on. None of the lights turn on. 1 Make sure you are using the power cord included with the PLA-4xx. 2 Make sure the power cord is connected to the PLA-4[...]

Chapter 7 LEDs and Troubl eshoo ting PLA-4xx Series User’s Guide 72 V The ETHERNET light does not turn on. 1 Check the hardware connection s. See the Quick S tart Guide. 2 Inspect your cables for damage. Contact th e vendor to replace an y damaged cables. 3 Check the Ethernet adapter on your computer and make sure it’ s enabled and working prop[...]

Chapter 7 LEDs and Troubleshooting PLA-4xx Series User’s Guide 73 • Y ou have pressed the ENCR YP T button for more than three seconds. T ry setting up a connection again, this time pressing the ENCR YP T buttons on both de vices for less than three seconds. 7.3 Configuration Utility Problems V The PLA-4xx Series Configuration Utilit y displays[...]

Chapter 7 LEDs and Troubl eshoo ting PLA-4xx Series User’s Guide 74 2 Y our powerline adapters may be locate d close to large appliances such as refrigerators or air-conditioners that cause in terference with the powerline signal. Move the adapters further away from such appl iances to reduce interference. 3 Y our powerline adapters may be placed[...]

Chapter 7 LEDs and Troubleshooting PLA-4xx Series User’s Guide 75 • If that does not work, try again with both devices connected to a power strip next to each other . If they now connect, then the devices w ere not on the same electrical circuit before. V The POWER lights on both devices blin k, then many light s blink and the HomePlug light bl[...]

Chapter 7 LEDs and Troubl eshoo ting PLA-4xx Series User’s Guide 76[...]

77 P ART III Appendices and Index Product Specification s (79) Legal Information (87) Customer Support (91) Index (97)[...]

78[...]

PLA-4xx Series User’s Guide 79 A PPENDIX A Product S pecifications The following tables summarize the PLA-4 xx’ s hardware and firmware features. T able 17 Hardware Specifications Dimensions (W x D x H) PLA-400/400 v2/402 v2 1 12 mm (L) x 106 mm (D) x 28.5 mm (H) PLA-401/401 v2 97 mm (L) x 45 mm (H) x 70 mm (W) PLA-470 162 mm (L) x 1 18 mm (D) [...]

Appendix A Product Specifica tions PLA-4xx Series User’s Guide 80 Power Outlet The power o utlets are on the PLA4 91 only . PLA491: Four power outlets with EMI filter . Coaxial Port PLA 402 v2 only Operation Environment PLA-400/401/400 v2/470/470 v2 T emperature: 0º C ~ 45º C Humidity: 5% ~ 95% Noncondensi ng PLA401 v2/402 v2 T emperature: 0º [...]

Appendix A Product Specifications PLA-4xx Series User’s Guide 81 Distance between the centers of the holes on the device’s back. PLA-400/400 v2/401/40 1 v2/402 v2 74 mm PLA-401/401 v2 Not applicable PLA-470/470 v2 11 5 m m PLA491 256mm Recommended type of screws for wall-mounting PLA-400/400 v2/402 v2 /470/470 v2 M3 T ap Screw PLA-401/401 v2 No[...]

Appendix A Product Specifica tions PLA-4xx Series User’s Guide 82 The following list , which is not exhaustive, illustrates the standa rds supported in the PLA-4xx. Electromagnetic Interference Example Electromagnetic Interference (EMI) can be intr oduced to the power circuit by certain appliances such as hair dryers and lamps. The figure below d[...]

Appendix A Product Specifications PLA-4xx Series User’s Guide 83 Figure 50 Electromagnetic Interference (EMI) W all-mounting Instructions Complete the following step s to hang your PLA-400/400 v2/4 01/401 v2/402 v2/470/470 v2/ 491 on a wall. " See T able 17 on p age 79 for the size of screws to use and how far apart to place them. 1 Select a[...]

Appendix A Product Specifica tions PLA-4xx Series User’s Guide 84 Figure 51 W all-mounting Example (PLA-4xx) Figure 52 W all-mounting Example (PLA-491) Cable Pin Assignment s RJ-45 Connector Pin Assignment s Figure 53 RJ-45 Connector Pins T able 21 RJ-45 Conn ector Pin A ssignments PIN NO RJ-45 SIGNAL ASSIGNMENT 1 RxD + 2 RxD - 3 TxD + 4 Not conn[...]

Appendix A Product Specifications PLA-4xx Series User’s Guide 85 6 TxD - 7 Not connected 8 Not connected PIN NO RJ-45 SIGNAL ASSIGNMENT[...]

Appendix A Product Specifica tions PLA-4xx Series User’s Guide 86[...]

PLA-4xx Series User’s Guide 87 A PPENDIX B Legal Information Copyright Copyright © 2008 by ZyXEL Communications Corporation. The contents of this publication may not be reprod uced in any part or as a whole, transcribed, stored in a retrieval system, tran slated into any language, or transmitted in any form or by any means, el ectronic, mechanic[...]

Appendix B Leg al In fo rm at ion PLA-4xx Series User’s Guide 88 If this device does cause harmful inte rference to radio/television reception, which can be determined by turning th e device off and on, the user is enc ouraged to try to correct the interference by one or more of the following measures: 1 Reorient or relocate the receiving antenna[...]

Appendix B Legal Information PLA-4xx Series User’s Guide 89 ZyXEL Limited W arranty ZyXEL warrants to the original en d user (purchaser) that this product is free from any defects in materials or workmansh ip for a period of up to two ye ars from the date of purchase. Du ring the warranty period, and upon proof of purchase, should the product hav[...]

Appendix B Leg al In fo rm at ion PLA-4xx Series User’s Guide 90[...]

PLA-4xx Series User’s Guide 91 A PPENDIX C Customer Support In the event of problems that cannot be solved by using this manual, you should contact your vendor . If you cannot contact yo ur vendor , then contac t a ZyXEL office for the region in which you bought the dev ice. Regional of fices are listed below (see also http:// www .zyxel.com/web/[...]

Appendix C Customer Support PLA-4xx Series User’s Guide 92 • Address: 1005F , ShengGao Internationa l T ower , No.137 XianXia Rd., Shanghai • W eb: http://www .zyxel.cn Cost a Rica • Support E-mail: soporte@zyxel.co.cr • Sales E-mail: sales@zyxel.co.cr • T elephone: +506-2017878 • Fax: +506-2 015098 • W eb: www .zyxel.co.cr • FTP:[...]

Appendix C C ustomer Support PLA-4xx Series User’s Guide 93 Germany • Support E-mail: support@zyxel.de • Sales E-mail: sales@zyxel.de • T elephone: +49-2405-6909 -69 • Fax: +49-2405-6909-99 • W eb: www .zyxel.de • Re g u l ar M a il : ZyXEL Deut schland GmbH., Adenauerstr . 20/A2 D-52146, W uerselen, Germany Hungary • Support E-mail[...]

Appendix C Customer Support PLA-4xx Series User’s Guide 94 Malaysia • Support E-mail: support@zyxel.com.my • Sales E-mail: sales@zyxel.com.my • T elephone: +603-8076-9933 • Fax: +603-8076- 9833 • W eb: http://www .zyxel.com.my • Regular Mail: ZyXEL Malaysia Sdn Bhd., 1-02 & 1-03, Jalan Kenari 17F , Bandar Puchong Jaya, 47100 Pucho[...]

Appendix C C ustomer Support PLA-4xx Series User’s Guide 95 Singapore • Support E-mail: support@zyxel.com.sg • Sales E-mail: sales@zyxel.com.sg • T elephone: +65-6899-6678 • Fax: +65-6899-8887 • W eb: http://www .zyxel.com.sg • Regular Mail: ZyXEL Singapore Pte Ltd., No. 2 International Business Park, The Strategy #03-28, Sin gapore 6[...]

Appendix C Customer Support PLA-4xx Series User’s Guide 96 T urkey • Support E-mail: cso@zyxel.com.tr • T elephone: +90 212 222 5 5 22 • Fax: +90-212-220-2 526 • W eb: http:www .zyxel.com.tr • Address: Kaptanpasa Mahallesi Piyalep asa Bulvari Ortadogu Plaza N:14/13 K:6 Okmeydani/Sisli Istanbul/T urkey Ukraine • Support E-mail: su ppor[...]

Index PLA-4xx Series User’s Guide 97 Index Symbols .NET Framework 25 A about screen 53 Advanced Encryption S tandard, see AES 19 AES 22 , 45 AES (Advanced Encryption S tandard) 19 applications 19 C cabling type 80 CE 81 certifications 81 , 87 notices 88 viewing 88 coaxial cable 20 configuration screen 47 connections overview 19 contact informatio[...]

Index PLA-4xx Series User’s Guide 98 M MAC address 35 , 47 management multiple networks 23 overview 45 managing the device using the web configurator . See web configurator . multiple networks 23 N network example 45 network information 49 network ports 80 P Parameter Information Block, see PIB 48 passw ords 35 , 46 , 47 , 48 types of 22 PIB (Par[...]