AEG HK956600FB manual

EN User Manual Hob HK956600FB[...]

CONTENTS 1. SAFETY INFORMATION................................................................................................. 3 2. SAFETY INSTRUCTIONS................................................................................................ 4 3. PRODUCT DESCRIPTION.............................................................................[...]

1. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety • This appliance can[...]

• Do not store items on the cooking surfaces. • Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. • Do not use a steam cleaner to clean the appliance. • After use, switch off the hob element by its control and do not rely on the pan detector. • If the glass ceramic surf[...]

• Make sure that a shock protection is installed. • Use the strain relief clamp on the cable. • Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to the near sockets • Do not use multi-plug adapters and extension cables. • Make sure not to cause damage to the[...]

• Cookware made of cast iron, aluminium or with a damaged bottom can cause scratches on the glass / glass ceramic. Always lift these objects up when you have to move them on the cooking surface. • This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating. 2.4 Care and cleaning • Clean regula[...]

Sensor field Function Comment 1 ON / OFF To activate and deactivate the hob. 2 Lock / The Child Safety Device To lock / unlock the control panel. 3 ProCook To activate and deactivate the function. 4 FlexiBridge To switch between three modes of the func- tion. 5 - Heat setting display To show the heat setting. 6 - Timer indicators of cook- ing zones[...]

Display Description Lock / The Child Safety Device function operates. Incorrect or too small cookware or no cookware on the cooking zone. Automatic Switch Off function operates. / / ProCook function operates. 3.4 OptiHeat Control (3 step Residual heat indicator) WARNING! / / There is a risk of burns from residual heat. The indicator shows the level[...]

4.4 Cooking zone indication min. max. The horizontal line shows the maximum size of the cookware. The break in the horizontal line shows the minimum cookware diameter. Refer to “Technical information” chapter. 4.5 Automatic Heat Up If you activate this function you can get a necessary heat setting in a shorter time. The function sets the highes[...]

To activate the function: touch of the timer. comes on. When the indicator of the cooking zone starts to flash slowly the time counts up. The display switches between and counted time (minutes). To see how long the cooking zone operates: set the cooking zone with . The indicator of the cooking zone starts to flash quickly. The display shows how lon[...]

• you touch • Minute Minder comes down • Count Down Timer comes down • you put something on the control panel. 4.12 Power management function • Cooking zones are grouped according to the location and number of the phases in the hob. See the illustration. • Each phase has a maximum electricity loading of 3700 W. • The function divides [...]

100-160mm Place the cookware with the bottom diameter larger then 160 mm centrally between two sections. > 160 mm 5.2 FlexiBridge Standard mode This mode is active when you activate the hob. It connects the sections into two separate cooking zones. You can set the heat setting for each zone separately. Use two left side control bars. Correct coo[...]

Incorrect cookware position: 5.4 FlexiBridge Max Bridge mode To activate the mode press until you see the correct mode indicator. This mode connects all sections into one cooking zone. To set the heat setting use one of the left side control bars. Correct cookware position: To use this mode you have to place the cookware on the four connected secti[...]

General information: • 160 mm is the minimum bottom diameter of the cookware for this function. • Heat setting display for the left rear control bar shows the position of the cookware on the induction cooking area. Front , middle , rear . • Heat setting display for the left front control bar shows the heat setting. To change the heat setting [...]

The printing on the flexible induction cooking area may become dirty or change colour from sliding the cookware. You can clean the area in a standard way. The bottom of the cookware must be as thick and flat as possible. Cookware dimensions Induction cooking zones adapt to the dimension of the bottom of the cookware automatically to some limit. The[...]

Heat setting Use to: Time (min) Hints 5 - 7 Steam vegetables, fish, meat. 20 - 45 Add some tablespoons of liq- uid. 7 - 9 Steam potatoes. 20 - 60 Use max. ¼ l water for 750 g of potatoes. 7 - 9 Cook larger quantities of food, stews and soups. 60 - 150 Up to 3 l liquid plus ingredi- ents. 9 - 12 Gentle fry: escalope, veal cor- don bleu, cutlets, ri[...]

8.1 What to do if... Problem Possible cause Remedy You cannot activate or oper- ate the hob. The hob is not connected to an electrical supply or it is connected incorrectly. Check if the hob is correctly connected to the electrical supply. Refer to the connec- tion diagram. The fuse is released. Make sure that the fuse is the cause of the malfuncti[...]

Problem Possible cause Remedy There is no signal when you touch the panel sensor fields. The signals are deactivated. Activate the signals. Refer to "Daily use" chapter. The flexible induction cook- ing area does not heat up the cookware. The cookware is in the wrong position on the flexi- ble induction cooking area. Place the cookware in[...]

Problem Possible cause Remedy ProCook function operates. Two pots are placed on the flexible induction cooking area. Use only one pot. Refer to "Flexible induction cooking area" chapter. and a number come on. There is an error in the hob. Disconnect the hob from the electrical supply for some time. Disconnect the fuse from the electrical [...]

• To replace the damaged mains cable use the following (or higher) mains cable type: H05BB-F Tmax 90°C. Speak to your local Service Centre. 9.4 Attaching the seal 1. Clean the worktop around the cut out area. 2. Attach the supplied seal stripe to the lower edge of the hob along the outer edge of the glass ceramic. Do not extend it. Make sure tha[...]

min. 55mm R 5mm 490 +1 mm 880 +1 mm min. 38 mm min. 2 mm min. 12 mm min. 2 mm 10. TECHNICAL INFORMATION 10.1 Rating plate Modell HK956600FB PNC 949 595 333 00 Typ 58 GCD CH AU 220 - 240 V 50 - 60 Hz Induction 7.4 kW Made in Germany Ser.Nr. ................. 7.4 kW AEG 10.2 Cooking zones specification Cooking zone Nominal power (maximum heat setting[...]

Cooking zone Nominal power (maximum heat setting) [W] Power function [W] Power function maximum dura- tion [min] Cookware diam- eter [mm] Flexible induc- tion cooking area 2400 3300 10 minimum 100 The power of the cooking zones can be different in some small range from the data in the table. It changes with the material and dimensions of the cookwa[...]

ENGLISH 23[...]

www.aeg.com/shop 867311046-A-262014[...]