Ir a la página of
manuales de instrucciones parecidos
-
Laptop
Alienware MJ-12 m7700a
162 páginas 4.99 mb -
Laptop
Alienware M14X
122 páginas 4.5 mb -
Laptop
Alienware m5550
92 páginas 3.4 mb -
Laptop
Alienware M14XR2
104 páginas 2.65 mb -
Laptop
Alienware M18X
72 páginas 4.45 mb -
Laptop
Alienware 17
128 páginas -
Laptop
Alienware 17 R1
128 páginas 5.79 mb -
Laptop
Alienware M11x
15 páginas 0.96 mb
Buen manual de instrucciones
Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Alienware M17X. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Alienware M17X o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.
¿Qué es un manual de instrucciones?
El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Alienware M17X se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.
Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Alienware M17X, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.
Entonces, ¿qué debe contener el manual de instrucciones perfecto?
Sobre todo, un manual de instrucciones Alienware M17X debe contener:
- información acerca de las especificaciones técnicas del dispositivo Alienware M17X
- nombre de fabricante y año de fabricación del dispositivo Alienware M17X
- condiciones de uso, configuración y mantenimiento del dispositivo Alienware M17X
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas
¿Por qué no leemos los manuales de instrucciones?
Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Alienware M17X no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Alienware M17X y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Alienware en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Alienware M17X, como se suele hacer teniendo una versión en papel.
¿Por qué vale la pena leer los manuales de instrucciones?
Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Alienware M17X, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.
Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Alienware M17X. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.
Índice de manuales de instrucciones
-
Página 1
01 01 / A L IENW ARE ® M17x SERVICE MANU AL[...]
-
Página 2
02 02 / e contents herein are subject to change without notice. © 2010 Dell Inc. Al l rights reserved. Reproduction of these materials in any manner whatsoever without the prior written permission of Dell Inc. is strictly prohibited. T rademarks used in this manual: Alienware is a registered trademark of Alienware Corporation; Dell and the Dell[...]
-
Página 3
03 03 / CONTENTS CONTENTS CHAPTER 1: BEFORE Y OU BEGIN ......................................... 6 Recommended T ools .............................................. 7 T urning O Y our Computer ........................................ 7 Before Working Inside Y our Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 CHAPTER 2: B[...]
-
Página 4
04 04 / CONTENTS CHAPTER 16: WIRELESS MINI-CARD(S) ................................. 72 Removing the Mini-Card(s) ....................................... 74 Replacing the Mini-Card(s) ....................................... 76 CHAPTER 17: PROCESSOR HEA T SINK .................................... 77 Removing the Processor Heat Sink .................[...]
-
Página 5
05 05 / CONTENTS CHAPTER 22: SYSTEM BOARD .......................................... 98 Removing the System Board ..................................... 100 Replacing the System Board ..................................... 102 CHAPTER 23: SPEAKERS .............................................. 103 Removing the Speakers ...............................[...]
-
Página 6
CHAPTER 1: BEFORE YOU BEGIN 06 06 / is section provides procedures for removing and installing the components in y our computer . Unless otherwise noted, each procedure assumes that the following conditions exist: Y ou have performed the steps in “T urning O Y our Computer” on page • 7 and “Before Working Inside Y our Computer” on p[...]
-
Página 7
07 07 / CHAPTER 1: BEFORE YOU BEGIN T urning O Y our Computer CAUTION: T o avoid losing data, save and close all open les and exit al l open programs before y ou turn o your computer . Save and close all open les and exit all open programs. 1. Shut down the operating system; click 2. Start , and click Shut Down . e computer turns o?[...]
-
Página 8
08 08 / CHAPTER 1: BEFORE YOU BEGIN Ensure that the work sur face is at and clean to prevent the computer co ver 1. from being scratched. T urn o your computer (see “T urning O Y our Computer” on page 2. 7 ). CAUTION: T o disconnect a network cable, rst unplug the cable from y our computer and then unplug the cable from the network [...]
-
Página 9
CHAPTER 2: BA TTERY P ACK 09 09 / CHAPTER 2: BA TTER Y P ACK CHAPTER 2: BA T TER Y P ACK[...]
-
Página 10
010 010 / CHAPTER 2: BA TTERY P ACK Battery Pack W ARNING: Before working inside your computer , read the safet y information that shipped with y our computer . For additional safety best practices information, see the Regulator y Compliance Homepage at www .dell.com/regulator y _compliance. W ARNING: Before per forming these procedures, turn o [...]
-
Página 11
01 1 011 / CHAPTER 2: BA TTERY P ACK 2 1 3 4 1 battery bay 3 battery latch 2 battery pack tabs (3) 4 battery pack Removing the Battery Pack Follow the instructions in “Before Y ou Begin” on page 1. 6 . T urn the computer over . 2. Slide the battery latch to the unlock position as shown. 3. e battery pack wil l pop up. 4. Remove the battery p[...]
-
Página 12
CHAPTER 3: COMP ARTMENT DOOR 012 012 / CHAPTER 3: COMP ARTMENT DOOR CHAPTER 3: COMP AR TMENT DOOR[...]
-
Página 13
013 013 / CHAPTER 3: COMP ARTMENT DOOR Compar tment Door W ARNING: Before working inside your computer , read the safet y information that shipped with y our computer . For additional safety best practices information, see the Regulator y Compliance Homepage at www .dell.com/regulator y _compliance. W ARNING: Before per forming these procedures, tu[...]
-
Página 14
014 014 / CHAPTER 3: COMP ARTMENT DOOR 1 3 2 1 captive screws (2) 3 compartment door tabs (3) 2 compartment door Removing the Compartment Door Follow the instructions in “Before Y ou Begin” on page 1. 6 . Remove the battery pack (see “Removing the Battery Pack” on page 2. 11). Loosen the two captive screws and remov e the compar tment door [...]
-
Página 15
CHAPTER 4: HARD DRIVE(S) 015 015 / CHAPTER 4: HARD DRIVE(S) CHAPTER 4: HARD DRIVE(S)[...]
-
Página 16
016 016 / CHAPTER 4: HARD DRIVE(S) Hard Drive(s) W ARNING: Before working inside your computer , read the safet y information that shipped with y our computer . For additional safety best practices information, see the Regulator y Compliance Homepage at www .dell.com/regulator y _compliance. W ARNING: If you remove the hard drive from the computer [...]
-
Página 17
017 017 / CHAPTER 4: HARD DRIVE(S) Removing the Hard Drive(s) Follow the instructions in “Before Y ou Begin” on page 1. 6 . Remove the battery pack (see “Removing the Battery Pack” on page 2. 11). Remove the compartment door (see “Removing the Compartment Door” on 3. page 1 4 ). Loosen the four captive screws that secure the primary har[...]
-
Página 18
018 018 / CHAPTER 4: HARD DRIVE(S) Remove the four screws that secure the hard driv e bracket to the hard drive. 7. Slide the hard drive out of the hard drive bracket. 8. 1 3 2 1 hard drive 3 screws (4) 2 hard drive bracket Remove the interposer from the hard driv e, if applicable. 9. 1 2 1 interposer 2 hard drive[...]
-
Página 19
019 019 / CHAPTER 4: HARD DRIVE(S) Replace the compartment door (see “Replacing the Compar tment Door” on 7. page 1 4 ). Replace the battery pack (see “Replacing the Batter y Pack” on page 8. 11). CAUTION: Before turning on the computer , replace al l screws and ensure that no stray screws remain inside the computer . Failure to do so may r[...]
-
Página 20
CHAPTER 5: PROCESSOR THERMAL F AN 020 020 / CHAPTER 5: PROCESSOR THERMAL F AN CHAPTER 5: PROCESSOR THERMAL F AN[...]
-
Página 21
021 021 / CHAPTER 5: PROCESSOR THERMAL F AN Processor ermal Fan W ARNING: Before working inside your computer , read the safet y information that shipped with y our computer . For additional safety best practices information, see the Regulator y Compliance Homepage at www .dell.com/regulator y _compliance. CAUTION: T o avoid electrostatic discha[...]
-
Página 22
022 022 / CHAPTER 5: PROCESSOR THERMAL F AN 3 2 1 1 processor thermal fan 3 processor thermal fan cable connector 2 captive screws (3) Removing the Processor ermal Fan Follow the instructions in “Before Y ou Begin” on page 1. 6 . Remove the battery pack (see “Removing the Battery Pack” on page 2. 11). Remove the compartment door (see “[...]
-
Página 23
CHAPTER 6: COIN-CELL BA TTERY 023 023 / CHAPTER 6: COIN-CELL BA TTERY CHAPTER 6: COIN-CELL BA T TER Y[...]
-
Página 24
024 024 / CHAPTER 6: COIN-CELL BA TTERY Coin-Cel l Battery W ARNING: Before working inside your computer , read the safet y information that shipped with y our computer . For additional safety best practices information, see the Regulator y Compliance Homepage at www .dell.com/regulator y _compliance. CAUTION: T o avoid electrostatic discharge, gro[...]
-
Página 25
025 025 / CHAPTER 6: COIN-CELL BA TTERY 2 1 1 coin-cell battery 2 coin-cel l battery cable connector Removing the Coin-Cell Battery Follow the instructions in “Before Y ou Begin” on page 1. 6 . Remove the battery pack (see “Removing the Battery Pack” on page 2. 11). Remove the compartment door (see “Removing the Compartment Door” on 3. [...]
-
Página 26
CHAPTER 7: MEMOR Y MODULE(S) 026 026 / Y ou can increase your computer memory b y instal ling memor y modules on the system board. See the “Basic Specications” section in y our Mobile Manual or in the Comprehensive Specications at support.del l.com/manuals for information on the memory supported by y our computer . Instal l only memory mo[...]
-
Página 27
027 027 / CHAPTER 7: MEMOR Y MODULE(S) Memory Module(s) W ARNING: Before working inside your computer , read the safet y information that shipped with y our computer . For additional safety best practices information, see the Regulator y Compliance Homepage at www .dell.com/regulator y _compliance. CAUTION: T o avoid electrostatic discharge, ground[...]
-
Página 28
028 028 / CHAPTER 7: MEMOR Y MODULE(S) Removing the Memory Module(s) Follow the instructions in “Before Y ou Begin” on page 1. 6 . Remove the battery pack (see “Removing the Battery Pack” on page 2. 11). Remove the compartment door (see “Removing the Compartment Door” on 3. page 1 4 ). Loosen the captive screw that secures the memory-mo[...]
-
Página 29
029 029 / CHAPTER 7: MEMOR Y MODULE(S) Use y our nger tips to carefully spread apar t the spring-locks on the memory 6. module connector until the module pops up. Remove the memory module. 7. 3 2 4 5 1 1 memor y module connector 3 memory module 2 spring locks (2) Replacing the Memory Module(s) CAUTION: If you need to install memor y modules in t[...]
-
Página 30
030 030 / CHAPTER 7: MEMOR Y MODULE(S) CAUTION: If the memor y module door is difcult to close, remove the memory module and reinstal l it. Forcing the memor y module door to close may damage y our computer . NOTE: If the memory module is not instal led properly , the computer may not boot. Align and insert the memor y-module door tabs into the [...]
-
Página 31
CHAPTER 8: CENTER CONTROL COVER 031 031 / CHAPTER 9: CENTER CONTROL COVER CHAPTER 8: CENTER CONTROL COVER[...]
-
Página 32
032 032 / CHAPTER 8: CENTER CONTROL COVER Center Control Cover W ARNING: Before working inside your computer , read the safet y information that shipped with y our computer . For additional safety best practices information, see the Regulator y Compliance Homepage at www .dell.com/regulator y _compliance. CAUTION: T o avoid electrostatic discharge,[...]
-
Página 33
033 033 / CHAPTER 8: CENTER CONTROL COVER Removing the Center Control Co ver Follow the instructions in “Before Y ou Begin” on page 1. 6 . Remove the battery pack (see “Removing the Battery Pack” on page 2. 11). Remove the compartment door (see “Removing the Compartment Door” on 3. page 1 4 ). Remove the two screws that secure the cente[...]
-
Página 34
034 034 / CHAPTER 8: CENTER CONTROL COVER T urn the center control cover as shown in the illustration. 7. Release the connector latch to disconnect the cable from the center control 8. cover connector . Lif t the center control cov er o the computer . 9. 3 2 1 1 center control co ver 3 cable 2 connector latch T urn the computer top side up, and [...]
-
Página 35
035 035 / CHAPTER 8: CENTER CONTROL COVER Replacing the Center Control Cover Follow the instructions in “Before Y ou Begin” on page 1. 6 . Slide the cable into the center control cover connector and pull down the 2. connector latch to secure the cable to the connector . Align the center control cover with the computer and snap the co ver in 3. [...]
-
Página 36
CHAPTER 9: KEYBOARD 036 036 / CHAPTER 10: KEYBOARD CHAPTER 9: KEYBOARD[...]
-
Página 37
037 037 / CHAPTER 9: KEYBOARD Keyboard W ARNING: Before working inside your computer , read the safet y information that shipped with y our computer . For additional safety best practices information, see the Regulator y Compliance Homepage at www .dell.com/regulator y _compliance. CAUTION: T o avoid electrostatic discharge, ground y ourself by usi[...]
-
Página 38
038 038 / CHAPTER 9: KEYBOARD 3 2 1 1 screws (5) 3 tabs (7) 2 keyboard Removing the Keyboard Follow the instructions in “Before Y ou Begin” on page 1. 6 . Remove the battery pack (see “Removing the Battery Pack” on page 2. 11). Remove the compartment door (see “Removing the Compartment Door” on 3. page 1 4 ). Remove the center control c[...]
-
Página 39
039 039 / CHAPTER 9: KEYBOARD Replacing the Keyboard Follow the instructions in “Before Y ou Begin” on page 1. 6 . Slide the keyboard cable and the keyboard light cable into the respective 2. system board connectors and pull down the connector latches to secure the cables to the connectors. Align the tabs on the keyboard with the slots on the c[...]
-
Página 40
CHAPTER 10: P ALM REST 040 040 / CHAPTER 8: P ALM REST CHAPTER 10: P ALM REST[...]
-
Página 41
041 041 / CHAPTER 10: P ALM REST Palm Rest W ARNING: Before working inside your computer , read the safet y information that shipped with y our computer . For additional safety best practices information, see the Regulator y Compliance Homepage at www .dell.com/regulator y _compliance. CAUTION: T o avoid electrostatic discharge, ground yourself by [...]
-
Página 42
042 042 / CHAPTER 10: P ALM REST Removing the Palm Rest Follow the instructions in “Before Y ou Begin” on page 1. 6 . Remove the battery pack (see “Removing the Battery Pack” on page 2. 11). Remove the three screws that secure the palm rest to the computer base. 3. 2 1 1 battery bay 2 screws (3)[...]
-
Página 43
043 043 / CHAPTER 10: P ALM REST T urn the computer over and slide the palm rest out as shown in the 4. illustration. CAUTION: Be extremely careful when removing the palm rest. e palm rest along with the cable that connects the touch pad to the system board connector are very fragile. 2 1 1 tabs (5) 2 palm rest Ease the palm rest up until y ou s[...]
-
Página 44
044 044 / CHAPTER 10: P ALM REST Replacing the Palm Rest Follow the instructions in “Before Y ou Begin” on page 1. 6 . Slide the touch pad cable into the touch pad connector and push the tabs 2. on the touch pad connector to secure the cable. Align the tabs on the palm rest with the slots on the computer . 3. Slide the palm rest into position. [...]
-
Página 45
CHAPTER 1 1: BRACKETS 045 045 / CHAPTER 1 1: BRACKETS CHAPTER 11: BRACKETS[...]
-
Página 46
046 046 / CHAPTER 1 1: BRACKETS Brackets W ARNING: Before working inside your computer , read the safet y information that shipped with y our computer . For additional safety best practices information, see the Regulator y Compliance Homepage at www .dell.com/regulator y _compliance. CAUTION: T o avoid electrostatic discharge, ground y ourself by u[...]
-
Página 47
047 047 / CHAPTER 1 1: BRACKETS Removing the Brackets Follow the instructions in “Before Y ou Begin” on page 1. 6 . Remove the battery pack (see “Removing the Battery Pack” on page 2. 11). Remove the compartment door (see “Removing the Compartment Door” on 3. page 1 4 ). Remove the center control co ver (see “Removing the Center Contr[...]
-
Página 48
CHAPTER 12: MAGNESIUM COVER 048 048 / CHAPTER 1 1: MAGNESIUM COVER CHAPTER 12: MAGNESIUM COVER[...]
-
Página 49
049 049 / CHAPTER 12: MAGNESIUM COVER Magnesium Cover W ARNING: Before working inside your computer , read the safet y information that shipped with y our computer . For additional safety best practices information, see the Regulator y Compliance Homepage at www .dell.com/regulator y _compliance. CAUTION: T o avoid electrostatic discharge, ground y[...]
-
Página 50
050 050 / CHAPTER 12: MAGNESIUM COVER 4 2 3 1 1 camera cable 3 Mini-Card antenna cables 2 display cable 4 magnesium co ver Removing the Magnesium Co ver Follow the instructions in “Before Y ou Begin” on page 1. 6 . Remove the battery pack (see “Removing the Battery Pack” on page 2. 11). Remove the compartment door (see “Removing the Compa[...]
-
Página 51
051 051 / CHAPTER 12: MAGNESIUM COVER Remove the left and right brackets (see “Removing the Brackets” on 9. page 47 ). Remove the ten screws that secure the magnesium co ver to the 10. computer base. Lif t the magnesium cov er o the computer . 11. 2 1 1 screws (10) 2 magnesium cover[...]
-
Página 52
052 052 / CHAPTER 12: MAGNESIUM COVER Replacing the Magnesium Cover Follow the instructions in “Before Y ou Begin” on page 1. 6 . Replace the magnesium cover on the computer base. 2. Replace the ten screws that secure the magnesium cover to the computer 3. base. Replace the lef t and right brackets (see “Replacing the Brackets” on page 4. 4[...]
-
Página 53
CHAPTER 13: DISPLA Y 053 053 / CHAPTER 12: DISPLA Y CHAPTER 13: DISPLA Y[...]
-
Página 54
054 054 / CHAPTER 13: DISPLA Y Display W ARNING: Before working inside your computer , read the safet y information that shipped with y our computer . For additional safety best practices information, see the Regulator y Compliance Homepage at www .dell.com/regulator y _compliance. CAUTION: T o avoid electrostatic discharge, ground y ourself by usi[...]
-
Página 55
055 055 / CHAPTER 13: DISPLA Y Remove the four screws (two from each hinge) that secure the display 9. assembly to the computer base. 2 1 1 display assembly 2 screws (4) Display Assembly Removing the Display Assembly Follow the instructions in “Before Y ou Begin” on page 1. 6 . Remove the battery pack (see “Removing the Battery Pack” on pag[...]
-
Página 56
056 056 / CHAPTER 13: DISPLA Y Replacing the Display Assembly Follow the instructions in “Before Y ou Begin” on page 1. 6 . Align the screw holes on the display hinges with the computer base. 2. Replace the four screws (two on each hinge) that secure the display 3. assembly to the computer base. Replace the magnesium cover (see “Replacing the[...]
-
Página 57
057 057 / CHAPTER 13: DISPLA Y 1 2 1 screws (2) 2 display assembly Display Back Cover Removing the Display Back Co ver Follow the instructions in “Before Y ou Begin” on page 1. 6 . Remove the battery pack (see “Removing the Battery Pack” on page 2. 11). Remove the compartment door (see “Removing the Compartment Door” on 3. page 1 4 ). R[...]
-
Página 58
058 058 / CHAPTER 13: DISPLA Y Slide the display back cover door out and lift it o the display assembly . 11. 1 1 display back co ver door Remove the two screws that secure the display back co ver to the display 12. assembly . Disconnect the AlienHead cable from the connector . 13. Slide the display back cover up and lift it o the display ass[...]
-
Página 59
059 059 / CHAPTER 13: DISPLA Y Replace the keyboard (see “Replacing the Keyboard” on page 11. 39 ). Replace the center control cover (see “Replacing the Center Control Co ver” 12. on page 35 ). Replace the compartment door (see “Replacing the Compar tment Door” on 13. page 1 4 ). Replace the battery pack (see “Replacing the Batter y P[...]
-
Página 60
060 060 / CHAPTER 13: DISPLA Y Lif t the top of the AlienHead board and slide the bottom portion down to 13. detach it from the tab that holds it in place. Lif t the AlienHead board o the display back cov er . 14. 1 2 3 1 AlienHead board 3 display back co ver 2 screw AlienHead Board Removing the AlienHead Board Follow the instructions in “Befo[...]
-
Página 61
061 061 / CHAPTER 13: DISPLA Y Replacing the AlienHead Board Follow the instructions in “Before Y ou Begin” on page 1. 6 . Align the AlienHead board with the tabs on the display back cover . Gently 2. press and slide the AlienHead board into place. Replace the screw that secures the AlienHead board to the display back 3. cover . Replace the dis[...]
-
Página 62
CHAPTER 14: INPUT/OUTPUT BOARD 062 062 / CHAPTER 13: INPUT/OUTPUT BOARD CHAPTER 14: INPUT/OUTPUT BOARD[...]
-
Página 63
063 063 / CHAPTER 14: INPUT/OUTPUT BOARD Input/Output Board W ARNING: Before working inside your computer , read the safet y information that shipped with y our computer . For additional safety best practices information, see the Regulator y Compliance Homepage at www .dell.com/regulator y _compliance. CAUTION: T o avoid electrostatic discharge, gr[...]
-
Página 64
064 064 / CHAPTER 14: INPUT/OUTPUT BOARD Release the connector latches on both ends of the ExpressCard cable and 9. remove the cable. 2 1 1 input/output board 2 ExpressCard cable Removing the Input/Output Board Follow the instructions in “Before Y ou Begin” on page 1. 6 . Remove the battery pack (see “Removing the Battery Pack” on page 2. 1[...]
-
Página 65
065 065 / CHAPTER 14: INPUT/OUTPUT BOARD Remove the three screws that secure the input/output board to the system 11. board and remove the earthing cable. T ilt the input/output board at an angle and lif t it out of the computer base. 12. 3 2 1 1 earthing cable 3 screws (3) 2 input/output board Disconnect the speaker cable, right speaker light cabl[...]
-
Página 66
066 066 / CHAPTER 14: INPUT/OUTPUT BOARD Replacing the Input/Output Board Follow the instructions in “Before Y ou Begin” on page 1. 6 . Place the input/output board in the computer base. 2. Replace the earthing cable and the three screws that secure the 3. input/output board to the system board. Route and connect the speaker cable, right speake[...]
-
Página 67
CHAPTER 15: OPTICAL DRIVE 067 067 / CHAPTER 14: OPTICAL DRIVE CHAPTER 15: OPTICAL DRIVE[...]
-
Página 68
068 068 / CHAPTER 15: OPTICAL DRIVE Optical Drive W ARNING: Before working inside your computer , read the safet y information that shipped with y our computer . For additional safety best practices information, see the Regulator y Compliance Homepage at www .dell.com/regulator y _compliance. CAUTION: T o avoid electrostatic discharge, ground y our[...]
-
Página 69
069 069 / CHAPTER 15: OPTICAL DRIVE Remove the two screws that secure the optical driv e to the computer base. 10. Release the connector latch and disconnect the optical drive cable from the 11. system board connector . 2 3 4 1 1 connector latch 3 screws (2) 2 optical drive cable 4 optical drive Removing the Optical Drive Follow the instructions in[...]
-
Página 70
070 070 / CHAPTER 15: OPTICAL DRIVE Disconnect the optical drive cable from the optical drive and remo ve the 13. cable. 2 1 1 optical driv e cable 2 optical drive Remove the v e screws that secure the optical drive bracket to the optical 12. drive. 3 2 1 1 screws (5) 3 optical driv e 2 optical drive bracket[...]
-
Página 71
071 071 / CHAPTER 15: OPTICAL DRIVE Replacing the Optical Drive Follow the instructions in “Before Y ou Begin” on page 1. 6 . Connect the optical drive cable to the optical drive. 2. Replace the ve screws that secure the optical drive bracket to the optical 3. drive. Place the optical drive in the computer base. 4. Slide the optical drive ca[...]
-
Página 72
CHAPTER 16: WIRELESS MINI-CARD(S) 072 072 / If y ou ordered a wireless Mini-Card with y our computer , the card is already installed. Y our computer has two Mini-Card slots: one Full Mini-Card slot • one Half Mini-Card slot • e types of Mini-Cards supported are: Wireless Local Area Network (WLAN) — Half Mini-Card • Wireless Personal Area[...]
-
Página 73
073 073 / CHAPTER 16: WIRELESS MINI-CARD(S) Wireless Mini-Card(s) W ARNING: Before working inside your computer , read the safet y information that shipped with y our computer . For additional safety best practices information, see the Regulator y Compliance Homepage at www .dell.com/regulator y _compliance. CAUTION: T o avoid electrostatic dischar[...]
-
Página 74
074 074 / CHAPTER 16: WIRELESS MINI-CARD(S) 4 3 2 1 1 antenna cable 3 WP AN/Bluetooth Mini-Card 2 securing clips (2) 4 system board connector Removing the Mini-Card(s) Follow the instructions in “Before Y ou Begin” on page 1. 6 . Remove the battery pack (see “Removing the Battery Pack” on page 2. 11). Remove the palm rest (see “Remo ving [...]
-
Página 75
075 075 / CHAPTER 16: WIRELESS MINI-CARD(S) 2 1 1 WP AN/Bluetooth Mini-Card 2 system board connector Lif t the Mini-Card(s) at an angle and remov e it from the system board 6. connector . CAUTION: When the Mini-Card is not in the computer , store it in protective antistatic packaging. For more information, see “Protecting Against Electrostatic Di[...]
-
Página 76
076 076 / CHAPTER 16: WIRELESS MINI-CARD(S) Secure the unused antenna cables in the protective mylar sleeve. 7. Replace the palm rest (see “Replacing the Palm Rest” on page 8. 44 ). Replace the battery pack (see “Replacing the Batter y Pack” on page 9. 11). CAUTION: Before turning on the computer , replace al l screws and ensure that no str[...]
-
Página 77
CHAPTER 17: PROCESSOR HEA T SINK 077 077 / CHAPTER 17: PROCESSOR HEA T SINK CHAPTER 16: PROCESSOR HEA T SINK[...]
-
Página 78
078 078 / CHAPTER 17: PROCESSOR HEA T SINK Processor Heat Sink W ARNING: Before working inside your computer , read the safet y information that shipped with y our computer . For additional safety best practices information, see the Regulator y Compliance Homepage at www .dell.com/regulator y _compliance. CAUTION: T o avoid electrostatic discharge,[...]
-
Página 79
079 079 / CHAPTER 17: PROCESSOR HEA T SINK 1 2 1 captive screws (6) 2 processor heat sink Removing the Processor Heat Sink Follow the instructions in “Before Y ou Begin” on page 1. 6 . Remove the battery pack (see “Removing the Battery Pack” on page 2. 11). Remove the compartment door (see “Removing the Compartment Door” on 3. page 1 4 [...]
-
Página 80
080 080 / CHAPTER 17: PROCESSOR HEA T SINK Replacing the Processor Heat Sink Follow the instructions in “Before Y ou Begin” on page 1. 6 . Peel the backing o the thermal cooling pads attached to the new processor 2. heat sink. NOTE: If the processor heat sink is replaced, the thermal cooling pads will be attached to the new processor heat si[...]
-
Página 81
CHAPTER 18: PROCESSOR 081 081 / CHAPTER 18: PROCESSOR CHAPTER 18: PROCESSOR[...]
-
Página 82
082 082 / CHAPTER 18: PROCESSOR Processor W ARNING: Before working inside your computer , read the safet y information that shipped with y our computer . For additional safety best practices information, see the Regulator y Compliance Homepage at www .dell.com/regulator y _compliance. CAUTION: T o avoid electrostatic discharge, ground y ourself by [...]
-
Página 83
083 083 / CHAPTER 18: PROCESSOR 2 1 3 4 1 processor 3 ZIF socket 2 pin-1 corner of processor 4 ZIF-socket cam screw Removing the Processor Follow the instructions in “Before Y ou Begin” on page 1. 6 . Remove the battery pack (see “Removing the Battery Pack” on page 2. 11). Remove the compartment door (see “Removing the Compartment Door”[...]
-
Página 84
084 084 / CHAPTER 18: PROCESSOR Peel the backing o the new thermal cooling pads in the kit and adhere the 4. pads to the portions of the processor fan and heat sink assembly that cover the processor . Replace the processor heat sink (see “Replacing the Processor Heat Sink” on 5. page 8 0). Replace the magnesium cover (see “Replacing the Ma[...]
-
Página 85
CHAPTER 19: GRAPHICS CARD(S) 085 085 / Y our computer may have a single graphics or dual graphics conguration. e graphics card on the left is the primar y graphics card and the graphics card on the right is the secondary graphics card. In a single graphics conguration, your computer wil l only have a primary graphics card. In a dual graphi[...]
-
Página 86
086 086 / CHAPTER 19: GRAPHICS CARD(S) Graphics Card(s) W ARNING: Before working inside your computer , read the safet y information that shipped with y our computer . For additional safety best practices information, see the Regulator y Compliance Homepage at www .dell.com/regulator y _compliance. CAUTION: T o avoid electrostatic discharge, ground[...]
-
Página 87
087 087 / CHAPTER 19: GRAPHICS CARD(S) 3 2 1 1 graphics card cable connector 3 screws (2) 2 secondary graphics card Removing the Graphics Card(s) Follow the instructions in “Before Y ou Begin” on page 1. 6 . Remove the battery pack (see “Removing the Battery Pack” on page 2. 11). Remove the compartment door (see “Removing the Compartment [...]
-
Página 88
088 088 / CHAPTER 19: GRAPHICS CARD(S) T o remove the primary graphics card: 7. Remove the left bracket (see “Removing the Brackets” on page a. 47 ). Remove the two screws that secure the primary graphics card to the b. system board. Lif t the primary graphics card at an angle and remove it from the c. system board connector . 2 1 1 screws (2) [...]
-
Página 89
089 089 / CHAPTER 19: GRAPHICS CARD(S) Replace the keyboard (see “Replacing the Keyboard” on page 4. 39 ). Replace the center control cover (see “Replacing the Center Control Co ver” 5. on page 35 ). Replace the compartment door (see “Replacing the Compar tment Door” on 6. page 1 4 ). Replace the battery pack (see “Replacing the Batte[...]
-
Página 90
CHAPTER 20: GRAPHICS CARD F AN(S) 090 090 / Y our computer may have a single graphics or dual graphics conguration. e graphics card on the left is the primary graphics card and the graphics card on the right is the secondar y graphics card. e primar y graphics card will have a primary graphics card fan and the secondar y graphics card wil [...]
-
Página 91
091 091 / CHAPTER 20: GRAPHICS CARD F AN(S) Graphics Card Fan(s) W ARNING: Before working inside your computer , read the safet y information that shipped with y our computer . For additional safety best practices information, see the Regulator y Compliance Homepage at www .dell.com/regulator y _compliance. CAUTION: T o avoid electrostatic discharg[...]
-
Página 92
092 092 / CHAPTER 20: GRAPHICS CARD F AN(S) 3 2 1 1 primar y graphics card fan cable 3 primary graphics card fan 2 captive screws (3) Removing the Graphics Card Fan(s) Follow the instructions in “Before Y ou Begin” on page 1. 6 . Remove the battery pack (see “Removing the Battery Pack” on page 2. 11). Remove the compartment door (see “Rem[...]
-
Página 93
093 093 / CHAPTER 20: GRAPHICS CARD F AN(S) Replacing the Graphics Card Fan(s) Follow the instructions in “Before Y ou Begin” on page 1. 6 . Place the graphics card fan in the computer base. 2. T ighten the three captive screws that secure the graphics card fan to the 3. computer base. Connect the graphics card fan cable to the system board con[...]
-
Página 94
CHAPTER 21: GRAPHICS CARD BLANK 094 094 / If y our computer has a dual graphics conguration, the secondary graphics card is already instal led on the right side of the computer base (to remove and replace the graphics card see the instructions in “Graphics Card(s)” on page 85 and “Graphics Card Fan(s)” on page 9 0). If you do not have a [...]
-
Página 95
095 095 / CHAPTER 21: GRAPHICS CARD BLANK Graphics Card Blank W ARNING: Before working inside your computer , read the safet y information that shipped with y our computer . For additional safety best practices information, see the Regulator y Compliance Homepage at www .dell.com/regulator y _compliance. CAUTION: T o avoid electrostatic discharge, [...]
-
Página 96
096 096 / CHAPTER 21: GRAPHICS CARD BLANK 1 2 1 graphics card blank 2 captive screws (3) Removing the Graphics Card Blank Follow the instructions in “Before Y ou Begin” on page 1. 6 . Remove the battery pack (see “Removing the Battery Pack” on page 2. 11). Remove the compartment door (see “Removing the Compartment Door” on 3. page 1 4 )[...]
-
Página 97
097 097 / CHAPTER 21: GRAPHICS CARD BLANK Replacing the Graphics Card Blank Follow the instructions in “Before Y ou Begin” on page 1. 6 . Place the graphics card blank in the computer base. 2. T ighten the three captive screws that secure the graphics card blank to the 3. computer base. Replace the right bracket (see “Replacing the Brackets?[...]
-
Página 98
CHAPTER 22: SYSTEM BOARD 098 098 / e system board’ s BIOS chip contains the Service T ag, which is also visible on a barcode label on the bottom of the computer . e Service T ag has to be entered in the replacement system board’ s BIOS chip using the System Setup utility . CHAPTER 20: SYSTEM BOARD CHAPTER 22: SYSTEM BOARD[...]
-
Página 99
099 099 / CHAPTER 22: SYSTEM BOARD System Board W ARNING: Before working inside your computer , read the safet y information that shipped with y our computer . For additional safety best practices information, see the Regulator y Compliance Homepage at www .dell.com/regulator y _compliance. CAUTION: T o avoid electrostatic discharge, ground y ourse[...]
-
Página 100
0100 0100 / CHAPTER 22: SYSTEM BOARD Remove the input/output board (see “Remo ving the Input/Output Board” on 13. page 64 ). Remove the optical driv e (see “Removing the Optical Drive” on page 14. 69 ). Remove the Mini-Card(s) (see “Remo ving the Mini-Card(s)” on page 15. 74 ). Remove the processor heat sink (see “Remo ving the Proces[...]
-
Página 101
0101 0101 / CHAPTER 22: SYSTEM BOARD 4 5 3 2 1 1 system board 4 consumer IR cable connector on consumer IR board 2 screws (5) 5 consumer IR cable connector on system board 3 lef t speaker light cable connector[...]
-
Página 102
0102 0102 / CHAPTER 22: SYSTEM BOARD Replace the center control cover (see “Replacing the Center Control Co ver” 17. on page 35 ). Replace the palm rest (see “Replacing the Palm Rest” on page 18. 44 ). Replace the memory module(s) (see “Replacing the Memor y Module(s)” on 19. page 2 9 ). Connect the coin-cell batter y cable to the syste[...]
-
Página 103
CHAPTER 23: SPEAKERS 0103 0103 / CHAPTER 21: SPEAKERS CHAPTER 23: SPEAKERS[...]
-
Página 104
0104 0104 / CHAPTER 23: SPEAKERS Speakers W ARNING: Before working inside your computer , read the safet y information that shipped with y our computer . For additional safety best practices information, see the Regulator y Compliance Homepage at www .dell.com/regulator y _compliance. CAUTION: T o avoid electrostatic discharge, ground y ourself by [...]
-
Página 105
0105 0105 / CHAPTER 23: SPEAKERS 2 1 1 speaker cables 2 speakers (2) Removing the Speakers Follow the instructions in “Before Y ou Begin” on page 1. 6 . Remove the system board (see “Remo ving the System Board” on page 2. 99 ). Remove the speaker cables from the routing guides. 3. Lif t the speakers o the computer base. 4. Replacing the [...]
-
Página 106
CHAPTER 24: CONSUMER IR BOARD 0106 0106 / CHAPTER 22: CONSUMER IR BOARD CHAPTER 24: CONSUMER IR BOARD[...]
-
Página 107
0107 0107 / CHAPTER 24: CONSUMER IR BOARD Consumer IR Board W ARNING: Before working inside your computer , read the safet y information that shipped with y our computer . For additional safety best practices information, see the Regulator y Compliance Homepage at www .dell.com/regulator y _compliance. CAUTION: T o avoid electrostatic discharge, gr[...]
-
Página 108
0108 0108 / CHAPTER 24: CONSUMER IR BOARD 2 1 1 consumer IR board 2 screws (2) Removing the Consumer IR Board Follow the instructions in “Before Y ou Begin” on page 1. 6 . Remove the system board (see “Remo ving the System Board” on page 2. 99 ). Remove the speakers (see “Remo ving the Speakers” on page 3. 10 5 ). Remove the two screws [...]
-
Página 109
CHAPTER 25: BA TTERY LA TCH ASSEMBL Y 0109 0109 / CHAPTER 24: BA TTER Y LA TCH ASSEMBL Y CHAPTER 25: BA T TER Y LA TCH ASSEMBL Y[...]
-
Página 110
01 10 0110 / CHAPTER 25: BA TTERY LA TCH ASSEMBL Y Battery Latch Assembly W ARNING: Before working inside your computer , read the safet y information that shipped with y our computer . For additional safety best practices information, see the Regulator y Compliance Homepage at www .dell.com/regulator y _compliance. CAUTION: T o avoid electrostatic[...]
-
Página 111
01 1 1 0111 / CHAPTER 25: BA TTERY LA TCH ASSEMBL Y 1 2 3 1 batter y latch assembly 3 latch spring 2 clip Removing the Battery Latch Assembly Follow the instructions in “Before Y ou Begin” on page 1. 6 . Remove the system board (see “Remo ving the System Board” on page 2. 99 ). Press and push the plastic clip on the battery release latch to[...]
-
Página 112
CHAPTER 26: BIOS 01 12 0112 / CHAPTER 25: BIOS CHAPTER 26: BIOS[...]
-
Página 113
01 13 0113 / CHAPTER 26: BIOS Entering System Setup T urn on (or restart) your laptop. 1. NOTE: Keyboard failure may result when a key on the keyboard is held down for extended periods of time. T o avoid possible keyboard failure, press and release <F2> in even intervals until the System Setup screen appears. While the laptop is booting, pres[...]
-
Página 114
01 14 0114 / CHAPTER 26: BIOS Main Menu Total Memory Displays the total memory available in your computer . Memory Bank 0 Displays the memor y size installed in memor y bank 0. Memory Bank 1 Displays the memor y size installed in memor y bank 1. Advanced Menu Wired Network Al lows y ou to enable or disable the on-board LAN controller . Disabled: In[...]
-
Página 115
01 15 0115 / CHAPTER 26: BIOS Advanced Menu SATA Operation Allows you to congure the operating mode of the integrated SA T A hard drive controller . A T A: SA T A is congured for A T A mode. • AHCI: SA T A is congured for AHCI mode. • RAID: SA T A is congured for RAID mode. • SATA Hard Drive 1 Displays the installed primar y SA T [...]
-
Página 116
01 16 0116 / CHAPTER 26: BIOS Security Menu System Password Status Displays the status of the system password. e system password is also known as the Master/Supervisor password. Set: e system password is enabled. • Clear: e system password is disabled. • Set System Password Allows you to set the system password. e system password co[...]
-
Página 117
01 17 0117 / CHAPTER 26: BIOS Exit Menu Exit Saving Changes Allows you to exit System Setup and save y our changes to CMOS. Exit Discarding Changes Allows you to exit utility without saving System Setup data to CMOS. Load Setup Defaults Allows you to load default values for all System Setup items. Discard Changes Allows you to load previous values [...]
-
Página 118
01 18 0118 / CHAPTER 26: BIOS - If y ou do not have your computer’ s Service T ag: Click a. Select Model . Select the type of product in the b. Select Y our Product Family list. Select the product brand in the c. Select Y our Product Line list. Select the product model number in the d. Select Y our Product Model list. NOTE: If y ou have selected [...]