American Dryer Corp. ML-82 III manual
- Consulta online o descarga el manual de instrucciones
- 46 páginas
- 2.58 mb
Ir a la página of
manuales de instrucciones parecidos
-
Clothes Dryer
American Dryer Corp. AD-531
53 páginas 3.24 mb -
Clothes Dryer
American Dryer Corp. ML-55HS
56 páginas 0.69 mb -
Clothes Dryer
American Dryer Corp. MLG31PCA
51 páginas 0.56 mb -
Clothes Dryer
American Dryer Corp. AD-24 Phase 7
50 páginas 1.04 mb -
Clothes Dryer
American Dryer Corp. AD/ML-310
74 páginas 2.05 mb -
Clothes Dryer
American Dryer Corp. AD-630
40 páginas 2.44 mb -
Clothes Dryer
American Dryer Corp. MDG50V
52 páginas 1.07 mb -
Clothes Dryer
American Dryer Corp. SL50
16 páginas 1 mb
Buen manual de instrucciones
Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones American Dryer Corp. ML-82 III. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica American Dryer Corp. ML-82 III o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.
¿Qué es un manual de instrucciones?
El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual American Dryer Corp. ML-82 III se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.
Desafortunadamente pocos usuarios destinan su tiempo a leer manuales American Dryer Corp. ML-82 III, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.
Entonces, ¿qué debe contener el manual de instrucciones perfecto?
Sobre todo, un manual de instrucciones American Dryer Corp. ML-82 III debe contener:
- información acerca de las especificaciones técnicas del dispositivo American Dryer Corp. ML-82 III
- nombre de fabricante y año de fabricación del dispositivo American Dryer Corp. ML-82 III
- condiciones de uso, configuración y mantenimiento del dispositivo American Dryer Corp. ML-82 III
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas
¿Por qué no leemos los manuales de instrucciones?
Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de American Dryer Corp. ML-82 III no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de American Dryer Corp. ML-82 III y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico American Dryer Corp. en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de American Dryer Corp. ML-82 III, como se suele hacer teniendo una versión en papel.
¿Por qué vale la pena leer los manuales de instrucciones?
Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo American Dryer Corp. ML-82 III, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.
Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual American Dryer Corp. ML-82 III. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.
Índice de manuales de instrucciones
-
Página 1
ML-82 III Installa tion Manual Gas – DSI / Steam Models / Phase 7 Fire Suppression System ADC Part No. 1 1334 4 - 9 American Dryer Corporation 88 Currant Road Fall River MA 02720-4781 USA T elephone: +1 (508) 678-9000 / Fax: +1 (508) 678-9447 e-mail: techsupport@amdry .com ww w .amdry .com A VERTISSEMENT : Assurez-vous de bien suivre les instruct[...]
-
Página 2
Retain This Manual In A Safe Place For Futur e Refer ence American Dryer Corporation products embody advanced concepts in engineering, design, and safety . If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation. ONLY qualified technicians should service this equipment. OBSER VE ALL SAFETY P[...]
-
Página 3
W ARNING CHILDREN SHOULD NOT BE ALLOWED T O PLA Y ON OR NEAR THE DR YER(S). CHILDREN SHOULD BE SUPER VISED IF NEAR DRYERS IN OPERA TION. CAUTION DR YERS SHOULD NEVER BE LEFT UNA TTENDED WHILE IN OPERA TION. FOR YOUR SAFETY DO NOT DR Y MOP HEADS IN THE DR YER. DO NOT USE DR YER IN THE PRESENCE OF DR Y CLEANING FUMES. IMPOR T ANT YOU MUST DISCONNECT [...]
-
Página 4
W ARNING The dryer must never be operated with any of the back guards, outer tops, or service panels removed. PERSONAL INJUR Y OR FIRE COULD RESUL T . IMPOR T ANT PLEASE OBSER VE ALL SAFETY PRECAUTIONS displayed on the equipment and/or specified in the installation manual included with the dryer . W ARNING DR YER MUST NEVER BE OPERA TED WITHOUT THE[...]
-
Página 5
T able of Contents SECTION I SAFETY PRECAUTIONS ............................................................................................................. ................. 2 SECTION II SPECIFICA TIONS/COMPONENT IDENTIFICA TION ......................................................................... 4 A . Specifications ........................[...]
-
Página 6
2 American Dryer Corp. 1 13344 - 9 SECTION I SAFETY PRECAUTIONS W ARNING: For your safety , the information in this manual must be followed to minimize the risk of fire or explosion or to prevent property damage, personal injury , or loss of life. W ARNING: The dryer must never be operated with any of the back guards, outer tops, or service panels [...]
-
Página 7
1 13344 - 9 www .amdry .com 3 7. A program should be established for the inspection and cleaning of lint in the burner area, exhaust ductwork, and area around the back of the dryer . The frequency of inspection and cleaning can best be determined from experience at each location. W ARNING: The collection of lint in the burner area and exhaust ductw[...]
-
Página 8
4 American Dryer Corp. 1 13344 - 9 SECTION II SPECIFICA TIONS/COMPONENT IDENTIFICA TION A. SPECIFICA TIONS T U M B L E R DI AMET ER 3 7 ” 94 cm T U M BL ER D E P T H 36” 91.5 cm TU MB LE R V OLUME 2 2 . 4 c u f t 634.29 L TU MB LE R/D RI V E MOTO R 1 / 2 h p 0.373 kW BLO WER / F AN MO T OR 3 hp 2.2 kW D OOR OP E NI N G (D I A M E TE R) 3 1 - 3 [...]
-
Página 9
1 13344 - 9 www .amdry .com 5 S pecifications NOTE: ADC reserves the right to make changes in specifications at any time without notice or obligation.[...]
-
Página 10
6 American Dryer Corp. 1 13344 - 9 B. COMPONENT IDENTIFICA TION 1. Dryer Front V iew Illus. No. Description 1 Controls 2 Control (top access) Door Assembly 3 Main Door Assembly 4 Lint Compartment Area (lint screen located behind door) 5 Lint Drawer 6 Data Label and Installation Label[...]
-
Página 11
1 13344 - 9 www .amdry .com 7 2. Dryer Rear V iew Illus. No. Description 1 Heating Unit 2 1/8” Compressed Air Supply Inlet (behind electric service relay box for steam units only) 3 * Electric Service Relay Box 4 Basket (tumbler) Bearing Mount Assembly 5 Idler Bearing Mount Assembly 6 Blower Motor Assembly 7 Leveling Leg (rear) 8 Basket (tumbler)[...]
-
Página 12
8 American Dryer Corp. 1 13344 - 9 SECTION III INST ALLA TION PROCEDURES Installation should be performed by competent technicians in accordance with local and state codes. In the absence of these codes, the installation must conform to applicable American National Standards: ANSI Z223.1- LA TEST EDITION (National Fuel Gas Code) or ANSI/NFP A NO. 7[...]
-
Página 13
1 13344 - 9 www .amdry .com 9 IMPOR T ANT : Dryer must be installed in a location/environment, which the ambient temperature remains between 40º F (4.44º C) and 130º F (54.44º C). B. UNP ACKING/SETTING UP Remove protective shipping material (i.e., plastic wrap and optional shipping box) from dryer . IMPOR T ANT : Dryer must be transported and h[...]
-
Página 14
10 American Dryer Corp. 1 13344 - 9 C. DR YER ENCLOSURE REQUIREMENTS Bulkheads and partitions should be made of noncombustible material. NOTE: Allowances must be made for opening the control door . A 40-inches (101.6 cm) for optimum opening of load door . B The maximum thickness of the bulkhead is 4-inches (10.16 cm). For electric dryers the maximu[...]
-
Página 15
1 13344 - 9 www .amdry .com 11 D. FRESH AIR SUPPL Y REQUIREMENTS When the dryer is operating, it draws in room air , heats it, passes this air through the basket (tumbler), and exhausts it out of the building. Therefore, the room air must be continually replenished from the outdoors. If the make-up air is inadequate, drying time and drying efficien[...]
-
Página 16
12 American Dryer Corp. 1 13344 - 9 E. EXHAUST REQUIREMENTS 1. General Exhaust Ductwork Information Exhaust ductwork should be designed and installed by a qualified professional. Improperly sized ductwork will create excessive back pressure which results in slow drying, increased use of energy , overheating of the dryer , and shut down of the burne[...]
-
Página 17
1 13344 - 9 www .amdry .com 13 2. Single Dryer V enting When possible, it is suggested to provide a separate exhaust duct for each dryer . The exhaust duct should be laid out in such a way that the ductwork travels as directly as possible to the outdoors with as few turns as possible. It is suggested that the use of 90° turns in the ducting be avo[...]
-
Página 18
14 American Dryer Corp. 1 13344 - 9 IMPOR T ANT : For extended ductwork runs, the cross section area of the ductwork can only be increased to an extent. When the ductwork approaches the maximum limits noted in this manual, a professional heating, ventilating, and air -conditioning (HV AC) firm should be consulted for proper venting information. ALL[...]
-
Página 19
1 13344 - 9 www .amdry .com 15 IMPOR T ANT : No more than four (4) dryers should be connected to one (1) main common duct. The main duct may be any shape so long as the minimum cross-sectional area is provided. The illustration on page 16 shows the minimum cross section area for multiple dryer round or square venting. These figures must be increase[...]
-
Página 20
16 American Dryer Corp. 1 13344 - 9 F . ELECTRICAL INFORMA TION 1. Electrical Requirements It is your responsibility to have ALL electrical connections made by a properly licensed and competent electrician to assure that the electrical installation is adequate and conforms to local and state regulations or codes. In the absence of such codes, ALL e[...]
-
Página 21
1 13344 - 9 www .amdry .com 17 * Contact factory for 3-wire system. 8/4/08 IMPOR T ANT : The dryer must be connected to the electric supply shown on the data label. In the case of 208 V AC or 240 V AC, the supply voltage must match the electric service specifications of the data label exactly . IMPOR T ANT : The wire size must be properly sized to [...]
-
Página 22
18 American Dryer Corp. 1 13344 - 9 For gas and steam dryers manufactured for operation at 3-phase (3ø), the electrical connections are made at the power distribution block located in the service box at the rear , upper left hand corner of the dryer . T o gain access to the service box and contactor , the service box cover must be removed. Providi[...]
-
Página 23
1 13344 - 9 www .amdry .com 19 T Y P E OF GAS NA TURA L L I QUI D P ROP A NE M an if ol d Pr es s u r e* 3. 5 in ch es W . C. 8.7 m b 10 .5 i n ch es W . C . 26. 1 mb I n -Lin e Pr essu re 6. 0 - 1 2. 0 in ch es W . C . 14. 92 - 29 .9 mb 11 . 0 i nc he s W.C . 27. 4 mb IMPOR T ANT : Failure to isolate or disconnect dryer from supply as noted can ca[...]
-
Página 24
20 American Dryer Corp. 1 13344 - 9 1) Natural Gas Regulation is controlled by the dryer ’ s gas valve’ s internal regulator . Incoming supply pressure must be consistent between a minimum of 6.0 inches (14.92 mb) and a maximum of 12.0 inches (29.9 mb) water column (W .C.) pressure. 2) Liquid Propane (L.P .) Gas Dryers made for use with L.P . g[...]
-
Página 25
1 13344 - 9 www .amdry .com 21 A 1/8” N.P .T . plugged tap, accessible for a test gauge connection, must be installed in the main gas supply line immediately upstream of each dryer . IMPOR T ANT : Pipe joint compounds that resist the action of natural and liquid propane (L.P .) gases must be used. W ARNING: NEVER TEST FOR GAS LEAKS WITH A FLAME!![...]
-
Página 26
22 American Dryer Corp. 1 13344 - 9 H. STEAM INFORMA TION It is your responsibility to have ALL steam plumbing connections made by a qualified professional to assure that the installation is adequate and conforms to local and state regulations or codes. IMPOR T ANT : Failure to comply with the requirements stipulated in this manual can result in co[...]
-
Página 27
1 13344 - 9 www .amdry .com 23 c . Flexible hoses or couplings must be used. The dryer vibrates slightly when it runs and this will cause the steam coil connections to crack if they are hard piped to the supply and return mains. d. Shutoff valves for each dryer should be installed in the supply , return, and drip trap return lines. This will allow [...]
-
Página 28
24 American Dryer Corp. 1 13344 - 9 C om pressed Air S u p p ly A i r P r essure N or mal 80 psi 5. 51 b ar M i n imu m S u ppl y 70 psi 4. 82 bar M ax imu m S u ppl y 90 psi 6. 21 b ar a . Air Requirements Shaded areas are stated in metric equivalents b. Air Connection Air connection to system --- 1/8” N.P .T . c . Air Regulation No air regulati[...]
-
Página 29
1 13344 - 9 www .amdry .com 25 5. S team Damper Air Piston (Flow Control) Operation Adjustment Although the damper operation was tested and adjusted prior to shipping at 80 psi (5.51 bar), steam damper operation must be checked before the dryer is put into operation. Refer to page 29 for instructions to check steam damper operation. If damper air a[...]
-
Página 30
26 American Dryer Corp. 1 13344 - 9 1. Installation a. Requirements The fire suppression system must be supplied with a minimum water pipe size of 1/2” and be provided with 40 psi +/- 20 psi (2.75 bar +/- 1.37 bar) of pressure. For use of optional manual bypass, a second source with the same piping and pressure requirements is required. Flexible [...]
-
Página 31
1 13344 - 9 www .amdry .com 27 T ypical water supply: OPTIONAL MANUAL BYP ASS Provisions are made in the dryer ’ s fire suppression system for the installation of an optional manual bypass. Depending on the model dryer , the connections for the manual bypass are made at the “T” or “three way” fitting located in the outlet supply side of t[...]
-
Página 32
28 American Dryer Corp. 1 13344 - 9 c. Electrical Requirements No independent external power source or supply connection is necessary . The 24 volt power to operate the fire suppression system is accomplished internally in the dryer (from the dryer controls). W ARNING: Electrical power must be provided to the dryer at ALL times. If the main electri[...]
-
Página 33
1 13344 - 9 www .amdry .com 29 K. PREOPERA TIONAL TEST ALL dryers are thoroughly tested and inspected before leaving the factory . However , a preoperational test should be performed before the dryer is publicly used. It is possible that adjustments have changed in transit or due to marginal location (installation) conditions. 1. T urn on electric [...]
-
Página 34
30 American Dryer Corp. 1 13344 - 9 NOTE: T o check for proper sail switch operation (for gas models only), open the main door and while holding main door switch plunger in, start dryer . Dryer should start but heat circuit should not be activated (on). If the heat system is activated, the sail switch is improperly adjusted and must be adjusted by [...]
-
Página 35
1 13344 - 9 www .amdry .com 31 L. PREOPERA TIONAL INSTRUCTIONS T o start the dryer: 1. The light emitting diode (L.E.D.) display will read “REAdY .” 2. Press the “E” on the keypad. 3. The dryer will start and the display will flash “dR YING MANUAL CYCLE E,” “dR Y TEMP 180F ,” “COOL TEMP 80F ,” “30 REMAIN,” and “dRUM TEMP .[...]
-
Página 36
32 American Dryer Corp. 1 13344 - 9 SECTION IV SER VICE/P AR TS INFORMA TION A. SER VICE Service must be performed by a qualified trained technician, service agency , or gas supplier . If service is required, contact the reseller from whom the ADC equipment was purchased. If the reseller cannot be contacted or is unknown, contact the ADC Service De[...]
-
Página 37
1 13344 - 9 www .amdry .com 33 SECTION V W ARRANTY INFORMA TION A. RETURNING W ARRANTY CARDS Before any dryer leaves the ADC factory test area, a warranty card is placed on the back side of the main door glass. These warranty cards are intended to serve the customer where we record the individual installation date and warranty information to better[...]
-
Página 38
34 American Dryer Corp. 1 13344 - 9 2. Each part must be tagged with the following information: a. Model number and serial number of the dryer from which part was removed. b. Nature of failure (be specific). c . Date of dryer installation. d. Date of part failure. e . Specify whether the part(s) being returned is for a replacement, a credit, or a r[...]
-
Página 39
1 13344 - 9 www .amdry .com 35 SECTION VI ROUTINE MAINTENANCE A. CLEANING A program and/or schedule should be established for periodic inspection, cleaning, and removal of lint from various areas of the dryer , as well as throughout the ductwork system. The frequency of cleaning can best be determined from experience at each location. Maximum opera[...]
-
Página 40
36 American Dryer Corp. 1 13344 - 9 NOTE: When cleaning steam coil fins, be careful not to bend the fins. If the fins are bent, straighten by using a fin comb, which is available from any local air conditioning supply house. 90 DA Y S 1. Remove lint from around basket (tumbler), drive motors, and surrounding areas. 2. Remove lint from gas valve bur[...]
-
Página 41
1 13344 - 9 www .amdry .com 37 D. LINT DRA WER REMOV AL T o remove the lint drawer from the dryer pull drawer out approximately halfway . Rotate and move lint drawer stop hinge downward and pull drawer out. (Refer to the illustration below .) IMPOR T ANT : After reinstalling the lint drawer back into the dryer , be sure to rotate/move the hinge bac[...]
-
Página 42
38 American Dryer Corp. 1 13344 - 9 SECTION VII PROCEDURE FOR FUNCTIONAL CHECK OF REPLACEMENT COMPONENTS 1. Microprocessor Controller (Computer) Board a . Upon completing installation of the replacement microprocessor controller (computer) board, reestablish power to the dryer . b. S tart the drying cycle by pressing any of the preset cycles in let[...]
-
Página 43
1 13344 - 9 www .amdry .com 39 2. For Models with Direct Spark Ignition (DSI) Module (T ype I) Theory of Operation: Start the drying cycle. When the gas burner ignites within the chosen trial for ignition time (6-seconds), the flame sensor detects gas burner flame and signals the DSI module to keep the gas valve open as long as there is a call for [...]
-
Página 44
40 American Dryer Corp. 1 13344 - 9 SECTION VIII DA T A LABEL INFORMA TION When contacting American Dryer Corporation , certain information is required to ensure proper service/parts information from ADC . This information is on the data label located on the upper left side panel area behind the top control (access) door . When contacting ADC , ple[...]
-
Página 45
1 13344 - 9 www .amdry .com 41 SECTION IX MANUAL RESET BURNER HI-LIMIT INSTRUCTIONS A. PHASE 7 This dryer was manufactured with a manual reset burner hi-limit thermostat, which is monitored by the Phase 7 computer . If the burner hi-limit is open prior to the start of the drying cycle, the dryer will start momentarily and then shut down, the Phase [...]
-
Página 46
ADC Part No. 1 13344 9 - 09/04/08 - 15[...]