American Dynamics 8200-2646-02 B0 manual

Part Number: 8200-26 46-0 2 B0 V ideoEdge IP Indoor Mini-dome Inst allation & Operation Guide V ersion1.6[...]

[...]

Copyright Under copyright laws, the contents of this manual may not be copied, photocopied, r eproduced, translated or reduced to any electronic medium or machine-readable form, in whole or in part, without prior written consent of Tyco Internat ional Ltd. © Copyright 2009 and its Respective Companies. All Rights Reserved, American Dynamics 6600 C[...]

4 Installation a nd Operation Guide Table Of Contents SAFETY PRECAUTIONS ............................................................................. 6 1. PRODUCT FEATURES............................................................................. 7 1.1 P RODUCT I NSTRUCTIONS ..................................................................... 7[...]

Installation a nd Operation Guide 5 5. Operation Instructi ons for the Network............................................... 27 5.1 M ICROSOFT I NTERNET E XPLORER ...................................................... 28 5.1.1 Conn ecting the IP camera ................................................................................................[...]

6 Installation a nd Operation Guide SAFETY PRECAUTIONS All the follow ing safety and operational instru ctions to prevent harm or injur y to the operator(s) or other person s should be read carefull y before the unit is ac tivated. W ARNING  T o pre vent fire or shock hazard, a void exposing this unit to rai n or moisture.  Do not block venti[...]

Installation a nd Operation Guide 7 1. PRODUCT FEA TURES 1.1 Product Instructions The VideoEdge IP Indoor Mini-dome ADCIPE3312I is a 3-axis IP dome camera with a vandal-proof body for day and night surveillance. Wi th the specific 3-axis mechanical design, this dome camera provides a flexible installation for ceiling or wall mounting and w ide angl[...]

8 Installation a nd Operation Guide 2. DESCRIPTION OF THE FRONT/RE AR VIEW 2.1 The Front Vie w 1. SD CARD slot: This is used for system software updati ng and archiving / accessing critical images. 2. RESET : Recover to factory default. 3. 5pin MINI USB Port: Y ou can use a USB device cable to connect the IP camera to the USB port on the PC . 4. GP[...]

Installation a nd Operation Guide 9 Alarm wiring diagram: 5. VIDEO OUT Connector: The connector provides the unit’s composite video signals to a monitor . 6. ETHERNET (PoE): This is a standard RJ-45 connector for 10/100 Mbps Ethernet networks. PoE (Power over Ethernet) function: Provides power to the device via the same cable as used for the netw[...]

10 Installation a nd Operation Guide 2.2 The USB function By connecting the IP camera with a PC via the USB connector, the IP camera can provide two different functions. 1. Insert an SD card: As a card re ader . Insert an SD card into the IP camera, then connect to the PC. Y ou mi ght transfer files between the SD card and the PC. Once you've [...]

Installation a nd Operation Guide 11 2.3 PoE (Power over Ethernet) These technologies will enable th e development of new networked appliances, by providing power as well as data over existing Ethernet cables. The Summary Comparison of PoE Standards (Table 1) is listed as follows. Table 1. Summary Comparison of PoE Standards SOURCE Ethernet RJ-45 c[...]

12 Installation a nd Operation Guide 2.4 Power LED & IR LED Pow er setting The IR Board:  The J1 Jumper: Controls ON/ OFF function o f the Power LED LED Power Disable: Pin1 & Pin2 short LED Power Enable (Factor y Default): Pin2 & Pin3 short Make short circuits of PIN 1 and PIN 2 to disabl e the Power LED function. Make short circuits[...]

Installation a nd Operation Guide 13  The J2 Jumper: Controls ON/ OFF function o f the IR LED IR Power Disable (Factor y Default): Pin1 & Pin2 short IR Power Enable: Pin2 & Pin3 short Make short circuits of PIN 1 and PIN 2 to disable the IR LED function and the IR LED will not light even when in the night mode. Make short circui ts of PI[...]

14 Installation a nd Operation Guide 2.5 Lens adjustment Before adjusting the lens, the user has to remove th e cover of the dome. 1) Loosen th e screws holding the camera mount and then 2) carefully lift the cover up. After all adjustments completion, attach the dome cover to the camera. I. Focus adjustmen t: (1) Loosen the fixing screws on the Zo[...]

Installation a nd Operation Guide 15 2.6 Cover A ttaching To attach the dome to the base, please do as steps (1) and (2). (1) Note that the protrusion (the convex-shaped fitter) 1 that reaches right up to the edge of the ring on the dome cover must align with the concave 2 on the dome body. The dome cover The dome body (2) Screw the dome cover and [...]

16 Installation a nd Operation Guide 2.7 Ceiling mounting When mounting the camera in the plywood ceiling, please follow steps (1) to (3). (1) Make 3 entry holes in the plywood ceiling as shown above. (2) Install the dome in the ceiling, then att ach the supplied “ceiling fix plate” to the camera. (3) Fix the dome to the ceiling using the 3 mou[...]

Installation a nd Operation Guide 17 3. INST ALLA TION Please follow the instructions and the diagram below to set up the system. 3.1 UPDA TING SYSTEM SOFTW ARE If the system software of the IP camera needs to be upgraded, please take the following steps to safely process it. Important: Before carrying out the following procedure s, please ensure t[...]

18 Installation a nd Operation Guide WA R N I N G : 1. Don’t use the NTFS format in step 1. 2. Steps 1 to 3 ha ve to be done on a PC. 3. Make sure the file of UPD ATE.BIN is a correct one in step 3, or the IP camera will not work normally after being updated. 4. If the power of the IP camer a is suddenl y lost in step 8, please remove the SD card[...]

Installation a nd Operation Guide 19 3.2 IP camera SD car d Troubleshooting 1. Check if the SD card position is correct or not. Please refer to the manual for the re lated information. 2. After powering the IP camera on, correctly inse rt the SD card, and a little icon of "SD" will show up in the upper-right corne r of the monitor screen.[...]

20 Installation a nd Operation Guide 4. Network Configuration 4.1 Cable Connection s Please follow the instructions below to connect y our IP camera to a computer or a network and to choose a proper RJ-45 cable configuration for connections. Physical specifications of the R J-45 cable for Ethernet Wire T ype Cat. 5 Connec tor T ype RJ-45 Max. Cable[...]

Installation a nd Operation Guide 21 4.2.2 Set IP Address Y ou need to set an IP address for the unit if the LAN unit isn’t connected to a DHCP server . Otherwise, please follow the instructions given below: Set the IP , MA SK and GA TEW A Y . The following is a sample setting. IP: 192.168.1.X MASK: 255.255.255.0 GA TEWA Y: 0.0.0.0 NOTE: When o n[...]

22 Installation a nd Operation Guide 4.3 TCP/IP Communication Sof tw are Follow the procedure below to install the TCP /IP communication program in y our computer . 1. Open the St a rt menu from your co mputer , and select the Settings/Control Panel option. 2. Double click the Network icon to enter the windows.[...]

Installation a nd Operation Guide 23 3. Click on the Configuration tag, and check if the TCP/IP is included among the network components list. If the TCP/IP is included, please process section 4.5. If it is not included, please follow section 4.4 to install the TCP/IP . 4.4 TCP/IP Ins tallation During the installation, you will be requested to inse[...]

24 Installation a nd Operation Guide 4.5 TCP/IP configuration setting Click Sta r t → Settings → Control Panel → Net work . Select TCP/IP , and then click Properties . Before processing the IP camera installation in a W AN, please make sure the Inte rnet connection works properly . If not, pleas e contact your ISP provider . 　 If you are us[...]

Installation a nd Operation Guide 25 4.6 Connection T esting With the previous settings, follow the instructi ons below to ensure whether you have established the connection successfully . 1. Click Star t → Programs → MS-DOS Prompt 2. Enter ping 192.168.1.168, then enter . (See the sample screen below). ** This is the IP address of IP camera th[...]

26 Installation a nd Operation Guide successfully est a blished. Please re-check all the hardware and software installations by repeating sections 4.4 and 4.5. If you still can’t establish the connection af ter rechecking, please contact your dealer . If you receive a response as in the sample screen below , you have successfully made the connect[...]

Installation a nd Operation Guide 27 5. Operation Instructions for the Ne t w ork The Microsoft Internet Explorer in a PC provi des the functions of moni toring remote z ones or watching recorded data through the TCP/IP prot ocol. The det ails are listed as follows. RJ-45 PIN configuration for Ethernet PIN NO. PIN Assignment 1. TX + 2. TX - 3. RX +[...]

28 Installation a nd Operation Guide 5.1 Microsof t Internet Explorer 5.1.1 Connecting the IP camera 1. St art up Microso ft Internet Explorer , and then follow the steps below to connect the IP camera. 2. Click on the URL block at the top of the window . 3. Enter the URL address of the IP camera into the URL block and press the “ Enter ” butto[...]

Installation a nd Operation Guide 29 Browsing images from th e IP camera The images from the IP camera are displayed on the home page when online with the IP camera. There are also additional settings provided on the home page. MJPEG mode or MP EG4 mode display different display formats on their home page. Homepage of MJPEG mode Homepage of MPEG4 m[...]

30 Installation a nd Operation Guide 5.1.2 Change Video Setting Please follow the steps below to change the image setting through the network as necessary . 1. Click on the Video button on the home page to enter the image-setting page. Video setting page of MJPEG mode Video setting page of MPEG4 mode 2. Adjust the image setting including “Device [...]

Installation a nd Operation Guide 31 6. Click on the Da y & Night button to enter the Day & Night page. i. Click on the drop-down list to choose the Day & Night mode of “A uto”, “Day mode”, “Night mode” and “Schedule”. ii. Set the values of Focus Adjust and Sensitivity . iii. Click on the Submit button to submit the new [...]

32 Installation a nd Operation Guide 7. Click on the Home button to return to the home page while the new image setting acts on the images to effect the desired changes instant ly . (If the setting has not been changed by the above steps, any (re)entry onto the home page w ill find images in their earlier or original setting.) Exchange the image fo[...]

Installation a nd Operation Guide 33 5.1.3 Change the Netw ork Setting Please follow the steps below to change the netwo rk setting through the network as necessary .  Set the network options and IP address. 1. Click on the Network button in the home page to enter the Networ k page. 2. The accessible networks here are the “FTP” (for P AL onl[...]

34 Installation a nd Operation Guide Description of function ke ys: IP A ddress: Enter the 4-byte IP Address in the appropriate blank space (the value in each box may be anywhere bet ween 0 and 255). Every IP camera has to own an IP address to be identified on the network. Netmask: Enter the 4-byte Subnet Mask in the required blank spaces (usually [...]

Installation a nd Operation Guide 35  Change the Network Setting — FTP (MJPEG mode only). Please follow the steps below to change the FTP setting via the network as necessary to upload recording data live. (*FTP function is for P AL version only .) 1. Click on the FTP button at top left to enter the “FTP Server Setting” page. 2. Enter the [...]

36 Installation a nd Operation Guide  Change the Network Setting — SMTP (MJPEG m ode only). Please follow the steps below to change the SMTP setting through the network as necessary . 1. Click on the SMTP button on the upper left menu to enter the “SMTP Server Setting” page. (*SMTP function is for P AL version only .) 2. Click “My Server[...]

Installation a nd Operation Guide 37  Change the Network Setting — SNTP . Please follow the steps below to change the SNTP setting through the network as necessary . 1. Click on the SNTP button on the upper left menu to enter the “SNTP Server Setting” page. 2. Enter the IP Address of the SNTP server , and choose one of the time zones as an[...]

38 Installation a nd Operation Guide  Change the Network Setting — DDNS. The “Network” page has, on its upper left, the “DDNS” icon. Please follow the step s below to change the DDNS setting through the network as necessary . 1. Click on the DDNS button on the upper left menu to enter the “DD NS Setting” page. 2. Click “Enable DD[...]

Installation a nd Operation Guide 39 Description of function ke ys: Enable DDNS Function: Checkmark to activate the function. DDNS T ype: Click to open the list of two DDNS modes to choose from: “DynDNS” and “hn”. Click on the “Apply” button and connect this website automatically and enter it. Enter your dynamic IP Address and Email Add[...]

40 Installation a nd Operation Guide  Change the Network Setting — PPPoE. The “Network” page has, on its upper left, the “PPPoE” icon. Please follow the step s below to change the PPPoE setting through the network as necessary . 1. Click on the PPPoE button on the upper left menu to enter the “PPPoE Setting” page. 2. Please read th[...]

Installation a nd Operation Guide 41  Change the Network Setting —UPnP . The “Network” page has, on its upper left, the “UPnP” icon. Please follow the step s below to change the UPnP setting through the network as necessary . 1. Click on the UPnP button on the upper left menu to enter the “Universal Plug and Play” page. 2. Click ?[...]

42 Installation a nd Operation Guide  Change the Network Setting — IP Filter The “Network” page has, on its upper left, the “IP Filter” icon. Please follow the step s below t o change the IP Filter setting through the network as necessary . 1. Click on the IP Filter button on the upper left menu to enter the “Network Setting” page.[...]

Installation a nd Operation Guide 43  Change the Network Setting —Network T raffic. The “Network” page has, on its upper left, the “T raffic ” icon. Please follow the steps below to change the UPnP setting through the network as necessary . 1. Click on the T raffic button on the upper left menu to enter the “Network T raffic” page.[...]

44 Installation a nd Operation Guide 5.1.4 Change the System S etting Please follow the steps below to change the date and ti me of the system setting through the network as necessary .  Set the Date and Time of the system 1. Click on the System button in the home page to enter the “Date And Time” p age (default). 2. Choose one of the three [...]

Installation a nd Operation Guide 45  Change the System Setting — Timest a mp. Please follow the steps below to change/add the timestamp through the network as necessary . 1. Click on the Timest amp button on the left side of the “System - Dat e and T ime” page to enter the “System - T imestamp” page. 2. Click “ Enable Timestamp ” [...]

46 Installation a nd Operation Guide  Change the System Setting — Users. Please follow the steps below to change/add the users’ authority through the network as necessary . 1. Click on the Users button on the left side of the “Date and T ime” page to enter the “Users” page. 2. Add, modify or delete any user ’s data as necessary . 3[...]

Installation a nd Operation Guide 47  Change the System Setting — Digital I/O. Please follow the steps below to change the Di gital I/O through the network as necessary . 1. Click on the Digit al I /O button on the left side of the “Date and T ime” page to enter the “Digital I/O Setting” page. 2. Mark the “Digital Input” “ON” o[...]

48 Installation a nd Operation Guide  Change the System Setting — Audio. Please follow the steps below to change the Audio through the network as necessary . 1. Click on the Audio button on the left side of the “Date and T i me” page to enter the “Audio Setting” page. 2. Mark the “Audio” “ON” or “OFF”. 3. Click on the Submi[...]

Installation a nd Operation Guide 49  Change the System Setting — RS485 Setting. Click on the RS485 Setting button on the left side of the “Date and Time” p age to enter the “RS485 Setting” page. Description of function ke ys: Baud rate: Eight different speeds can be used: 2400 baud per second, 4800 baud, 9600 baud, 19200 baud, 28800 b[...]

50 Installation a nd Operation Guide  Change the System Setting — Update Firmware. Please follow the steps below to update the firmware through the network as necessary . 1. Click on the Update button on the left side of the “Date and T i me” page to enter the “Update Firmware” page. 2. Click on the “Browse…” button to select the[...]

Installation a nd Operation Guide 51  View the Event Logs. Please follow the steps below to view event s through the network as necessary . 1. Click on the Even t s button on t he upper left above to enter the “Event Log” page. 2. Choose one of the three buttons shown on the page to view an event when necessary . The three buttons are titled[...]

52 Installation a nd Operation Guide 5.1.5 Change the Application Setting Please follow the steps below to change the applic ation setting through the network as necessary .  Change the Ap plication Setting — FTP App lication Setting (MJPEG mode only). Please follow the steps below to change the FTP setting via the network as necessary to uplo[...]

Installation a nd Operation Guide 53  Change the Ap plication Setting — SD Card Application Setting. Please follow the steps below to change the SD CARD setting via the network as necessary to upload recording data live. 1. Click on the SD card button on the top left to enter the “SD Card Ap plication Setting” page. SD Card setting page of[...]

54 Installation a nd Operation Guide  Change the Ap plication Setting —SMTP A pplication Setting (MJPEG mode only). Please follow the steps below to change the SM TP setting via the network as necessary . 1. Click on the SMTP button on the left side to enter the “SMTP Application Setting” page. (*SMTP function is for P AL version only .) 2[...]

Installation a nd Operation Guide 55  Change the Ap plication Setting —Language Setting. Please follow the steps below to change the Language setting via the network as necessary . 1. Click on the Language button on the left side to enter the “Language Setting” page. You have an option as to which language to use. The default is “English[...]

56 Installation a nd Operation Guide  Change the Ap plication Setting —Rec ord Application Enable Setting. Please follow the steps below to change the setting via the network as necessary . 1. Click on the Enable Record button on the left side of the record to enter the “Record Application Enable Setting” page. Record setting page of MJPEG[...]

Installation a nd Operation Guide 57  Change the Ap plication Setting —Record - Schedule. 1. Click on the Application button on the home page to enter th e “Record - Schedule” page. 2. Check/uncheck any/all of the first seven boxes se t vertically in the upper half of the “Schedule” page to enable/disable the programmed recording f unc[...]

58 Installation a nd Operation Guide  Change the Ap plication Setting — Al arm Application Enable Setting. Please follow the steps below to change the setting via the network as necessary . 1. Click on the Enable Alarm button on the left side of the record to enter the “Alarm Application Enable Setting” page. MJPEG mode MPEG4 mode 2. Click[...]

Installation a nd Operation Guide 59  Change the Ap plication Setting — Alarm - Motion Detection. Please follow the steps below to enable changes in the motion detection function of the alarm through the network as necessary . Set the motion detection: 1. Click on the Motion Detection button on the left side of the Alarm to enter the “Alarm [...]

60 Installation a nd Operation Guide 5.1.6 Change the SD card Settin g Please follow the steps below to change the SD ca rd setting through the network as necessary .  Change the SD card Setting — FILELIST of MEMORY CARD. Please follow the steps below to change the setting via the network as necessary . 1. Click on the “SD card” button at [...]

Installation a nd Operation Guide 61 5.1.7 PPPoE & DDNS Using the PPPoE 1. Install the XDSL sof tware (obtained from your ISP dealer) in your P C. 2. Search your IP camera's IP address: you can connect the IP camera and the Video monitor . The monitor screen will show the IP address on its right side. 3. Turn off the DHCP function (of the [...]

62 Installation a nd Operation Guide T est: Go t o the Internet. 1. Set your PC to enter the Internet. 2. Desktop → IE browser → Enter the IP camera IP address (the same address as in the PPPoE settings and step 3 above) → Y ou can see the IP camera images. DDNS settings 1. Check your IP camera’s IP address (monitor ) → open your IE brows[...]

Installation a nd Operation Guide 63 5.1.8 The Bandw idth Calculator of the IP camera Y ou can use the calculator to obtain the rough bandwidth throughput for reference. Enter “ http://***.***.***.***/calculator .html ” into t he URL block and press the “Enter” button to enter the calculating page. (The ***.***.***.*** is the URL address of[...]

64 Installation a nd Operation Guide 6. ADV ANCED OPERA TI ON Question 1: How to view the li ve images of the IP camera via the Microsoft Internet Explorer on the Desktop PCs or the lapt op computers in a si tuation where ther e are no monitors or television? ◇ T o get the IP address of the IP camera without a monitor , use one of the follow ing [...]

Installation a nd Operation Guide 65 ◇ Set the recording time (the A VI durati on) of the SD card 1. Click on the Application button in the home page into the “SD-Card APPLICA TION SETTI NG” page. 2. Choose the AV I D u r a t i o n from the drop-do wn list. If you want to record the file into the SD card for 30 seconds, please choose 30 secon[...]

66 Installation a nd Operation Guide 3. Choose “ON” from the “PPPoE mode” list to activate it. 4. Enter the Account and the Password which are p rovided from your ISP . 5. Click on the Submit button to submit the setting. NOTE: Please refer to secti on 5.1.7 for more de tails. ◇ Use the Sub Hostname to view the IP camera 1. Click on the U[...]

Installation a nd Operation Guide 67 7. SPECIFICA TIONS ADCIPE3312IC N VideoEdge IP Indo or Mini-dome, 3.3-12mm, clear , NTSC, w/PS ADCIPE3312IC PE V ideoEdge IP Indoor Mini-dome, 3.3-12mm, clear , P AL, EU Plug, w/PS ADCIPE3312IC PU V ideoEdge IP Indoor Mini-dome, 3.3-12mm, clear , P AL, UK Plug, w/PS ADCIPE3312IS N VideoEdge IP Indoor Mini-dome, [...]

68 Installation a nd Operation Guide LED indicator Network / P ower indica tor Power requ ir ement DC12V (8.4W ) / AC24V / PoE ( IEEE 802.af) Temperature 0 – 5 0 ℃ Dimensions (mm) 152.9 (D) x 116.3 (H) Approvals FCC / CE / RoHS CD x 1 Quick install ation manual x 1 Power adapt er x 1 Others Accessories USB connection line x 1 * S pecifications [...]

Installation a nd Operation Guide 69 APPENDIX 1. –IP camera UPnP How T o The most troublesome issue when you setup a LANCam ® is that yo u have no idea what the IP address of this device is. Now LANCam ® support s the UPnP (Univers al Plug and Play) protocol which makes it easier for you to examine it; ho wever , it is a pity that Microsoft Win[...]

70 Installation a nd Operation Guide Figure 2 Step 2: When Control Panel appears, double-click the Netw ork Connections icon. The Network Connectio ns dialog box appears. See Figure 3. Figure 3 Step 3: Click on the Protocols tab in the Network Connections dialog box. See Figure 4. Figure 4 Step 4: When the Local A r ea Connection Proper ties dialog[...]

Installation a nd Operation Guide 71 Figure 5 Step 5: In the Internet Protocol(TCP/IP) Properties dialog box, choose Use t he following IP Address to indicate that you do not wish to use DHCP , and assign IP Address 192.168.1.200 with Subnet mask 255.255.255.0. Click OK when you finish it. See Figure 6. Figure 6 Step 6: Choose Close to finish the m[...]

72 Installation a nd Operation Guide 2. Install UPnP Packets As described before, Microsoft Windows XP ® doesn’t start the UPnP service by default; however , we have to install some p a cket s before we initia lize it. The following steps will help you to inst all them. Step1: From the Start m en u , poin t to Set Program Access and Default , an[...]

Installation a nd Operation Guide 73 Figure 10 Step 4: Check UPnP User Inter face , and choose OK . See Figure 1 1. Figure 11 Step 5: When the original Network Component Wizard dialog box retu rns, click Next . See Figure12. Figure 12[...]

74 Installation a nd Operation Guide Step 6: Af ter about one minute the UPnP installation w ill be done, and choose Finish to close it. See Figure13. Figure 13 3. Turn on Ser vices After installation, we should turn on the relative services to start the UPnP protocol. The following procedures will teach you how to do it. Step 1: Fr om the Start me[...]

Installation a nd Operation Guide 75 Figure15 Step 3: Click on the Services icon in the Administrative T ools dialog box. See Figure16. Figure16 Step 4: When the Services dialog box shows up, double click the SSDP Discovery Service icon . See Figure17.[...]

76 Installation a nd Operation Guide Figure17 Step 5: Choose Auto ma t ic in the Startu p t yp e , and click OK to start it. See Figure18. Figure18 Step 6: When the Services dialog box appears a gain, double click the Uni versal Plug and Play Device Host icon. See Figure19.[...]

Installation a nd Operation Guide 77 Figure19 Step 7: Choose Auto ma t ic in the S tartup type, press the Start button, and click OK to start it. See Figure20. Figure20 Step 8: Restart your system.[...]

78 Installation a nd Operation Guide 4. Scan LANCams ® through M y Network Place After your installation and starting services, the UPnP protocol will take effect. You can scan all LANCams ® in My Network Place like Figure21 and Figure22 below. Figure21 Figure22 Just double click the UPnP MPEG4 IP camera the video live stream will pop up automati[...]

Installation a nd Operation Guide 79 APPENDIX 2. –The ARP function Setting the IP Address The Ethernet interface on the IP camera has a default IP address ( 192.168.1.168) that most likely needs to be changed to make it work on your lo cal net work. You need to acquire a u nique IP address (ask your network administrator). For the initial setting[...]

80 Installation a nd Operation Guide ARP and ping from U NIX or GNU/Linux: 1. Start a shell 2. T ype the following as superuser (root): arp -s <IP address> <Ethernet address> [ or arp -s <IP address> < MAC address>] ping <IP address> Example: arp -s 192.168.1.100 00-0C-0C-0 0-00-01 ping 192.168.1.100 The device respond[...]

Installation a nd Operation Guide 81 APPENDIX 3. –Register as a DDNS member The DDNS （ dynamic domain name system ） is a function which is provided by an American company . Please refer to www.dyndns.com . This chapter provides the user with the basic instructions on how to register a free DDNS service. Registering for a DDNS Enter the URL ww[...]

82 Installation a nd Operation Guide Figure 2 Figure 3 Click “My Services” to enter the service page. Please click the “Add Host Service” item which is below the ”My Hosts“ item, as shown in Figure 4. Click “Add Host Service”, and its service items will appear . The Ad d Dynamic DNS Host item helps to add a new DDNS. Each member may[...]

Installation a nd Operation Guide 83 Figure 4 Figure 5 All we have to set in this page is the “Hostname” item. Y ou can choose a Sub Hostna me as s/he likes from the right-hand side of the Hostname’s drop-down list. NOTE: Y ou don’t ha ve to set the “IP A ddress” in the same format as the camera’s IP Address. It will renew the IP Addr[...]

84 Installation a nd Operation Guide Figure 6[...]

Installation a nd Operation Guide 85 APPENDIX 4. –MPEG4 Bit Rate Lookup T able of IP camera 1. When frame rate is higher than 15 frames/second (15 is not including): Highest High Medium Low Lowest FULL D1 3 2.5 2 1.5 1 VGA 2.63 2.25 1.75 1.31 0.88 2CIF 1.5 1.25 1 0.75 0.5 Half VGA 1.31 1.13 0.88 0.67 0.44 CIF 0.75 0.63 0.5 0.38 0.25 QVGA 0.66 0.5[...]

86 Installation a nd Operation Guide APPENDIX 5. –PoE Installation Method 1. Provided accessories: IP Indoor Mini-dome Ethernet (CA T5 UTP/Straight Throug h) Cable Power over Ethernet Injector (input rating: DC 48V) AC Ad ap te r (input: A C 100-240V; output: DC 48V) Power Cord War n i n g : Please follow the steps in this instruction carefully .[...]

Installation a nd Operation Guide 87 2. Indoor Mini-dome 3. Power over Ethernet Injector POWER+DA T A IN: Connect a CA T 5 RJ-45 straight- through cable from the POWER+DA T A OUT port on the Power ove r Ethernet In j ector . POWER IN: Using the supplied 48V power supply , c onnect to a wall power outlet. LA N IN: Conn ect a CA T 5 RJ-45 straight- t[...]

88 Installation a nd Operation Guide 4. Connecting the IP Indoor Mini-dome: please take the fo llowing steps: Step 1: Insert one end of a Cat 5 Ethernet RJ-45 cable into the “LIN IN” port of the Power over Ethernet Injector . Connect the other end of the cable to your network switch or PC. Step 2: Plug one end of the Power adapter into the “P[...]

Installation a nd Operation Guide 89 APPENDIX 6. –F AQ 1. Can the SD card be removed during recording? A ： No, it cannot be removed until the recording comes to a single point. The POWER LED flashing light signals the SD card is operating. Th e green light indicates the unit is activating. The red light warns the SD card cannot be removed. If t[...]