AOC 2036S manual

[...]

2 Safety ........................................................................................................................................................................ 4 National Conventions ......................................................................................................................................... 4 Power ...[...]

3 Warr anty S tatement for Europe ........................................................................................................................ 53 Warr anty S tatement for North & South America (excluding Brazil) ........................................................... 55[...]

4 Safe ty National Con ventions The following subsections describe notational conventions used in this document. Notes, Cautions, and W arnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type . These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: A NOTE in[...]

5 Power The monitor should be operated onl y from the type of pow er source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local pow er company . The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. T his plug will fit only into a grounded po[...]

6 Inst allati on Do not place the monitor o n an unstab le cart, stand, tripod, bracket, or t able. If the monitor fa lls, it can injure a person and cause serious d amage to this product. Use only a cart, st and, tripod, bracket, or table recommended b y the manufacturer or sold with this product. Follow the manufacturer‟s instructions when inst[...]

7[...]

8 Cleaning Clean the cabinet regularly with the cloth provided. Y ou c an use soft -detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet. W hen cleaning, make sure no detergent is leaked i nto the produc t. The cleaning cloth s hould not be t oo rough as it will scratch the screen surface. Please dis[...]

9 Other If the product is emitting a strange smell, sound or smoke, disconnect the pow er plug IMMEDIA TEL Y and contact a Service Center . Make sure that the ventilating openings are not blocked by a t able or curtain. Do not engage the LCD monitor in severe vibration or high imp act conditions during operation. Do not knock or drop the monitor du[...]

10 Setup Content s i n Box Not all signal cables (Analog,, USB, Audi o, and HDMI cables) will be provided for all countries and regions. Please check with the local dealer or AOC branch office for c onfirmation.[...]

11 Setup St and & Base Please setup or remove the base following the steps as below . Setup: Remove:[...]

12 Adjusting Vie w ing Angle For optimal viewing it is recommended to look at the f ull face of the monitor , then adjust the monitor's angle to your own preference. Hold the stand so you will not topple the monitor when you change the monitor's angle. Y ou are able to adjust the monitor's angle from -5° to 20 ° . NOTE: Do not touc[...]

13 Connecting the Monitor Cable Connections On Back of Monitor and Computer: 1. Power 2. Analog (DB -15 VGA cable) T o p rotect equipment, always turn off the PC and LCD monitor before conn ecting. 1 Connect the pow er cable to the AC port on the back of the monitor . 2 Connect one end of the 15-pin D-Sub cable to the back of the monitor and conne [...]

14 W all Mounting Preparing to Instal l An Optional Wall Mounting Arm. This monitor can be attached to a wall mounting arm you purchase separately . Disconnect power before this procedure. Follow these steps: 1 Remove the base. 2 Follow the manufacturer's instructions to assemble the w all moun ting arm. 3 Place the w all mounting arm onto the[...]

15 Adjusti ng Setting Optimal Resol ution Windows V ist a For Windows Vist a: 1 Click ST ART . 2 Click CONTROL P ANEL. 3 Click Appearance and Personalization. 4 Click Personalization[...]

16 5 Click Display Settings. 6 Set the resolution SLIDE-BAR to 1 60 0 by 900 .[...]

17 Windows XP For Windows XP: 1 Click ST ART . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Click Appearance and Themes. 5 Double click DISPLA Y .[...]

18 6 Click SETTINGS. 7 Set the resolution SLIDE-BAR to 1 60 0 by 900 . Windows ME/2000 For Windows ME/2000: 1 Click ST ART . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Double click DISPLA Y . 5 Click SETTINGS. 6 Set the resolution SLIDE-BAR to 1 60 0 by 90 0.[...]

19 Hotkeys Power Press to turn on or turn off the monitor . Source (4 : 3 or wide)/ Up Press key to change the screen aspect ratio between standard 4:3 format or W ide format. W hen the input resolution is wide format, the aspect ratio hotkey is disabled. When the main m enu or sub -menu is active, the key functions as to select up or increase valu[...]

20 OSD Setting Basic and simple instruction on the control key s. W hen you pre ss the MENU button on the front control of your monitor , the On DOWN Screen Display (OSD) Main Controls window will pop up a nd you can then start making a djustments to your monitor's various features. Us e the UP or DOWN keys to make your adjustments. Follow the[...]

21 Eco mode[...]

22 Item Icon Function Adjust Range Description Eco mode DCR Select to active Dynamic contrast ratio S tandard Select to active S tandard Mode T e xt Select to active T e xt Mode Internet Select to active Internet Mode Game Select to active Game Mode Movie Select to active Movie Mode S ports Select to active S ports Mode Notes : W hen Eco mode is no[...]

23 Color Boost[...]

24 Item Icon Function Adjust Range Description Color Boost Full Enhance on or off Disable or Enable Full Enhance Mode Nature Skin on or off Disable or Enable Nature Skin Mode Sky-blue on or off Disable or Enable Sky-blue Mode Green Fi eld on or off Disable or Enable Green Field Mode Auto Detect on or off Disable or Enable AutoDetect Mode Demo on or[...]

25 Luminance[...]

26 Item Icon Function Adjust Range Description Luminance Brightness 00-100 Contrast 00-100 Gamma Gamma1, 2, 3 Adjust to Gamma1, Gamma2, Gamma3 Exit Exit to main menu Notes : W hen Eco mode is not set as “S tandard”, Contrast and Brightness can not be adjusted; When DCR is set as “On”, Contrast, Brightness, Eco mode and Gamma can not be adju[...]

27 Image Setup[...]

28 Item Icon Function Adjust Range Description Image Setup Clock 00-100 Adjust picture Clock to reduce V ertical-L ine noise. Phase 00-100 Adjust Picture Phase to reduce Horizontal-Line noise H.Position 00-100 Adjust the vertical position of the picture. V .Pos ition 00-100 Adjust the horizontal position of the picture. Exit Exit to main menu Notes[...]

29 Color T emperature[...]

30 Item Icon Function Adjust Range Description Color T em peratu re User Red 00-100 Red Gain from Digital- re gister User Green 00-100 Green Gain Digital-register . User Blue 00-100 Blue Gain from Digital-register Normal 7300K Recall Normal Color T em perature from EEPROM. War m 6500K Recall War m Color T em perature from EEPROM. Cool 9300K Recall [...]

31 Picture Boost[...]

32 Item Icon Function Adjust Range Description Picture Boost Horizontal Position 00-100 Adjust Frame horizontal Position V ertical Position 00-100 Adjust Frame vertical Position Contrast 00-100 Adjust Frame Contrast Brightness 00-100 Adjust Frame Brightness Frame Size 14 - 100 Adjust Frame Size Bright Frame on or off Disable or Enable Brigh t Frame[...]

33 Extra Setting[...]

34 Item Icon Function Adjust Range Description Extra Setting Language Select the OSD language Reset yes or no Reset the menu to default DDC - CI yes or no T urn ON/OFF DDC-CI Sup port T ime out 05-120 Adjust the OSD T imeout T rans parence 00-100 Adjust the transparence of OSD H. Position 00-100 Adjust the vertical position of OSD V . Pos ition 00-[...]

35 Exit[...]

36 LED Indicator St a tus LED Color Full Power Mode Blue Active-off Mode Orange[...]

37 Driver Monitor Dri ver Windows 2000 1. S tart Windows® 2000 2. Click on the 'S tart' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select 'Monitor' - If the &[...]

38 Windows XP 1. S tart Windows® XP 2. Click on the 'S tart' button and then click on 'Control Panel'. 3. Select and click on the category „Appearance and T hemes‟ 4. Click on the 'Display' Item.[...]

39 5. Select the 'Settings' tab then click on the 'Advanced' button. 6. Select 'Monitor' tab - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active, click on 'Properties' button. Please follow[...]

40 8. Select the 'Install from a list or specific location [advanc ed]' radio button and then click on the 'Next' button. 9. Select the 'Don't Search. I will choose the driver to insta ll' radio button. Then c lick on the 'Next' button. 10. Click on the 'Have disk...' button, then click on the [...]

41 Windows V ist a 1. Click "S tart " and "Control Panel". Then, double-click on "Appearance and Personalization". 2. Click "Personalization" and then "Display Settings". 3. Click "Advanced Settings...".[...]

42 4. Click " Properties" in the "Monitor" t ab. If the "Properties" b utton is dea ctivated, it means the configuration for your monitor is completed. T he monitor can be used as is. If the message "Windows needs..." is displayed, as shown in the figure below , click "Continue". 5. Click "Upda[...]

43 i-Menu Welcome to “i - Menu” sof tware by A OC. i-Menu makes it easy to adjust your monitor display setting by using on screen menus instead of the OSD button on the monitor . T o complete installation, please follow the install ation guide.[...]

44 T roubleshoot Problem & Question Possible Solutions Po wer LED Is Not ON Make sure the po wer button i s ON and the Power Cord i s pro perly co nnected to a grounded power outlet and to the monitor . No images on the screen Is the power cord connected properly? Check the power cord connection and power supply . Is the cable connected correct[...]

45 Monitor Is Stuck In Active Off-Mode" The Computer Power Switch should be in the ON position. The Computer Video Card should be snugly f itted in its slot. Make sure the monitor's video cable is properly connected to the computer . Inspect the monitor's video cable and make sure no pin is bent. Make sure your computer is operationa[...]

46 S pecification General Specification LCD Panel model na me 2036S Driving sy stem TFT Color L CD Viewable Image Size 50.8cm diag onal Pixel pitch 0.2 76 8mm( H) x 0.2 76 8mm(V) Video R, G, B Analog lnterf ace & Dig ital Interface Separate Sy nc. H/V TTL Display Color 16.7M Colors Dot Clock 14 0MHz Resolution Horizontal sc an range 30 kHz - 80[...]

47 Weight (w ith packaging) 5.5 kg Environment al Temperature: Operating 0° to 40° Non-Operati ng -20° to 60° Humidity: Operating 10% to 85% ( non-conden sing) Non-Operati ng 5% to 80% ( non-condens ing) Altitude: Operating 0~ 3000m (0~ 10000 ft ) Non-Operati ng 0~ 5000m (0~ 15000 ft ) Preset Displa y Modes STAND RESOLUTION HORIZONTAL FREQUENCY[...]

48 Pin A s signments Pin Number 15 -Pin Side of the Signal Cable 1 Video-Red 2 Video-Green 3 Video-Blue 4 N.C. 5 Detect Cable 6 GND-R 7 GND-G 8 GND-B 9 +5V 10 Ground 11 N.C. 12 DDC -Serial data 13 H-sync 14 V -sync 15 DDC -Serial clock[...]

49 Plug and Pla y Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities acc ording to the VESA DDC ST ANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC us ed, communicate additional information about its display cap abilities. The DDC2B is a bi-directional data c[...]

50 Regulation FCC Notice FCC Class B Radio Frequency Interference Statement W ARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limit s are designed to provide reasonable protection aga inst harmful interference in a r[...]

51 WEEE Declaration Disposal of Was te Equipment by Users in Private Household in the European Union. This symbol on the product or on its p ackaging indicates that this produc t must not be disposed of w ith your other household waste.Instead, it is your responsibility to dispose of your w aste equipment by handing it over to a designated collecti[...]

52 EPE A T Declarat ion EPEA T is a system to help purchasers in the public and private sectors evaluate, compare and select desktop computers, notebooks and monitors based on their environmental attributes. EPEA T also provides a clear and consistent set of performance criteria for the design of product s, and provides an opportunity fo r manufact[...]

53 Service W arrant y S tatement for Europ e LIMITED T HREE-YEAR WARRANTY * AOC Color Monitors sold within Europe AOC International (Europe) GmbH warrants this product to b e free from defects in material and w orkmanship for a period of Three (3) years af ter the original date of consumer purchase. During this period, AOC International (Europe) Gm[...]

54 modified or altered; you bear the sole responsibility and liability for any such modification or alteration. ALL EXPRESS AND IMPLIED WARRANT IES FOR T HIS PRODUCT (INCLUDING T HE W ARRANTIES OF MERCHANT A BILITY AND FITNESS FOR A P ARTICULAR PURPOSE) ARE LIMITED IN DURA TION T O A PERIOD OF T HREE (3) YEARS FOR P ART S AND LABOR FROM THE ORIGINA[...]

55 W arra nty S tatement for North & South A merica (excluding Brazil) WARR ANTY ST A T EMENT for AOC Color Monitors Including those Sold within North America as S p ecified Envision Peripherals, Inc. warrants this product to be free fr om defects in material and workmanship for a period of three (3) years for parts & labor and one (1) year[...]

56 ALL EXPRESS AND IMPLIED WARRANT IES FOR T HIS PRODUCT (INCLUDING T HE W ARRANTIES OF MERCHANT A BILITY AND FITNESS FOR A P ARTICULAR PURPOSE) ARE LIMITED IN DURA TION T O A PERIOD OF T HREE (3) YEARS FOR P AR TS AND LABOR A ND ONE (1) YEAR FOR CR T TUBE OR LCD P ANEL FROM T HE ORIGINAL DA TE OF CONSUMER PURCHASE. NO WARRANTIES (EIT HER EXPRESSED[...]