AOC 2341VG manual

[...]

2 Safety......................................................................................................................... ............................................... 4 National C onventio ns ........................................................................................................... .............................. 4 Power [...]

3 HG Declar ation ................................................................................................................. ............................... 56 EPEA T Declar ation .............................................................................................................. ............................ 57 Service ............[...]

4 Safety National Conventions The following subsections describe n otational conventions used in this document. Notes, Cautions, and W arnings Throughout this guide, blocks of text ma y be accomp anied by an icon and printe d in bold type or in italic type. These blocks are notes, cautions, and warn ings, and they are used as follows: NOTE: A NOTE [...]

5 Power The monitor should be operat ed only from the type of power source indicated on the lab el. If you are not sure of the type of power supplied to your hom e, consult your dealer or local power company . The monitor is equipped with a three-pronged grounded plug, a plu g with a third (grounding) pin. This plug will fit only into a grounded po[...]

6 Inst allation Do not place the monitor on a n unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product. Follo w the manufacturer ’s instructions when installin[...]

7 Cleaning Clean the cabinet regularly with the cloth provided. Y ou can use soft-detergent to wipe out the st ain, instead of strong-detergent which will c auterize the product cabinet. When cleaning, make sure no detergent is leaked into the product. T he cleaning cloth should not be too r ough as it will scratch the screen surface. Please discon[...]

8 Other If the product is emitting a strange smell, sound or smoke, disconnect the po wer plug IMMEDIA TEL Y and contact a Service Center . Make sure that the ventilating ope nings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vib ration or high impact conditions during operation. Do not knock or drop the monitor du[...]

9 Setup Content s in Box Not all signal cables (Ana log, USB, DVI, and HDMI cables ) will be pr ovided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation. USB Camera will be not provided for customers. Please check with the local dealer or AOC branch office for  confirmation . Monitor[...]

10 Setup S t and & Base Please setup or remove the base follo wing the step s as below . Setup: Remove:[...]

11 Adjusting V iewing Angle For optimal viewing it is recommended to look at the full fa ce of the monitor , then adjust the monitor's angle to your own preference. Hold the stand so you will not toppl e the moni tor when you change the monitor's angl e. Y ou are able to adjust the mo nitor's angle from -5° to 20 °. NOTE: Do not to[...]

12 Connecting the Monitor Cable Connections On Back of Monitor and Computer: T o protect equipment, always turn off the PC and LCD monitor before connecting. 1 Connect the power cable to the AC port on the back of the monitor . 2 Connect one end of the 15-pin D-Sub / 24-pin DVI cable to the back of the monitor and co nn ect the other end to the com[...]

13 W all Mounting Preparing to Install An Optional W all Mounting Arm. This monitor can be attached to a wall mounting arm you p urchase separately . Disconnect po we r before this procedure. Follow these steps: 1 2 Follow the manufacturer's instructi ons to assemble the wall mounting arm. 3 Place the wall mounting arm onto t he back of the mo[...]

14 Adjusting Setting Optimal Resolution Windows Vist a For Windows Vist a: 1 Click ST A RT . 2 Click CONTROL P A NEL. 3 Click Appearance and Pers onalization. 4 Click Personalization[...]

15 5 Click Display Settings. 6 Set the resolution SLIDE-BAR to 1920 by 1080 .[...]

16 Windows XP For Windows XP: 1 Click ST A RT . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Click Appearan ce and Themes. 5 Double click DISPLA Y .[...]

17 6 Click SETTINGS. 7 Set the resolution SLIDE-BAR to Windows ME/2000 For Windows ME/2000: 1 Click ST ART . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Double click DISPLA Y . 5 Click SETTINGS. 6 Set the resolution SLIDE-BAR to 1 920 by 10 8 0 . 1 92 0 by 10 8 0 .[...]

18 Hotkeys Power Press the Power button to turn 0n/off the monitor . Eco Mode / < Press the Eco key continuously to select the Eco m ode of brightness when there is no OSD ( Eco mode hot key may not be available in all models). 4:3 or wide image ratio / > When there is no OSD, pr ess right hotkey continu ously to c hange 4:3 or wide image rat[...]

19 OSD Setting Basic and simple instruction o n the control keys. 1) Press the MENU-button to activate the OSD window . 2) Press < or > to navigate through the functions. Once t he desired function is highlighted, press the MENU-button to activate sub-menu . Once the des ired function is highl ighted, press MENU-button to activate it. 3) Pres[...]

20 Luminance Press Menu to display MENU Press (Menu) to display menu. Press or to select (Luminance) , and press to enter . Press or to select submenu, press to enter , and press or to adjust. Press to exit.[...]

21 Brightness 0-100 Backlight Adjustment Contrast 0-100 Contra st from Digital-register. Standard Standard Mode Tex t Text Mode Internet Internet Mode Game Game Mode Movie Movie Mode Eco mode Sports Sports Mode Gamma1 Adjust to Gamma1 Gamma2 Adjust to Gamma 2 Gamma Gamma3 Adjust to Gamma 3 Off Disable dy namic contrast rati o DCR On Enable dynamic [...]

22 Image Setup Press +/- select (Image picture), and Press Menu to enter Press (Menu) to display menu. Press or to select (Image Setup) , and press to enter . Press or to select submenu, press to enter , and press or to adjust. Press to exit.[...]

23 Clock 0-100 Adjust picture Clock to reduce Vertical-Line noise. Phase 0-100 Adjust Picture Phase to reduce Horizontal-Line noise H.Position 0-100 Adjust the horizontal positio n of the picture. V.Position 0-10 0 Adjust the vertical position of the picture.[...]

24 Color T emperature Press (Menu) to display menu. Press or to select (Color T emperature) , and press to enter . Press or to select submenu, press to enter , and press or to adjust. Press to exit.[...]

25 Warm 6500K Recall Warm Color Temperature from EEPROM. Normal 7300K Recall Normal Color T emperature from EEPROM. Cool 9300K Recall Cool Color T emperature from EEPROM. sRGB Recall SRGB Color Temperature from EEPROM. Red Red Gain from Digital-register Green Green Gain Digital-register. User Blue Blue Gain from Digital-register[...]

26 Color Boost Press (Menu) to display menu. Press or to select (Color Boost) , and press to enter . Press or to select submenu, press to enter , and press or to adjust. Press to exit.[...]

27 Full Enhance on or off Disable or Enable Full Enhan ce Mode Nature Skin on or off Disable or Enable Nature Skin Mode Green Field on or off Disable or Enable Green F ield Mode Sky-blue on or off Disable or Enable Sky-blue M ode AutoDetect on or off Disable or Enable AutoDetect Mode Demo on or off Disable or Enable Demo[...]

28 Picture Boost Press (Menu) to display MENU. Press or to select (Picture Boost); and press to enter . Press or to select Bright Frame. Select “on” to activate Picture Boost. Press or to select submenu, press to enter , and press or to adjust. Press to exit.[...]

29 Frame Size 14-100 Adjust Frame Size Brightness 0-100 Adjust Frame Brightness Contrast 0-100 Adjust Frame Contrast H. position 0-100 Adjust Frame horizontal Position V.position 0-100 Adjust Frame v ertical Position Bright Frame on or off Disable or Enable Bright Frame[...]

30 OSD Setup Press (Menu) to display menu. Press or to select (OSD Setup) , and press to enter . Press or to select submenu, press to enter , and press or to adjust. Press to exit.[...]

31 OSD Setup H.Position 0-100 Adjust the horizontal position of OSD V.Position 0-10 0 Adjust t he vertical position of OSD Timeout 5-120 Adjust the OSD Timeout Transparence 0-100 Adjust the transparence of OSD Language Select the OSD language[...]

32 Extra Press (Menu) to display menu. Press or to select (OSD Setup) , and press to enter . Press or to select submenu, press to enter , and press or to adjust. Press to exit.[...]

33 Input Select Select An alog Sigal Source as Input Auto Config yes or no Auto adjust the picture to default Image Ratio wide or 4:3 Select wide or 4:3 format for display DDC-CI yes or no Turn ON/OFF DDC-CI Support Off time 0 to 24hrs Select DC off time Information Sho w the information of the main image and sub-image s ource D-SUB[...]

34 Reset Press or to select YES or NO. Press (Menu) to display menu. Press or to select (Reset), and press to enter . Press to exit.[...]

35 Reset yes or no Reset the menu to default[...]

36 Exit Exit Exit the main OSD Press (Menu) to display menu. Press or to select (Exit); and press to enter .[...]

37 LED Indicator Stat us LED Color Full Power Mode Green or Blue Active-off Mode Orange or red[...]

38 Driver Monitor Driver Windows 7 1.S tart Windows® 7 2.Click on the 'St art' button and then click on 'Control Panel'. 3. Click on the 'Display' icon.[...]

39 4.Ckick on the “Change display settings ” button. 5. Click the “ A dvanced Settings” button. 6. Click the “Monitor” tab and then click the “Properties” button.[...]

40 7.Click the “Driver” tab. 8. Open the "Update Driver Soft w are-Generi c PnP Monitor" window by clicking on “Update Driver... “ and then click the "Browse my computer for driver software" button. 9. Select "Let me pick from a list of device driv ers on my computer" .[...]

41 10. Click the “Have Disk” button. Click on the “Brow se” button and navigate to the following directory: X:Drivermodule name ( where X is the drive letter designator for the CD-ROM drive). 11. Select the "xxx.inf" file and click the “Open” button. Click the “OK” button. 12. Select your monitor model and click the “N[...]

42 Windows Vist a 1. Click "S tart " and "Control Pane l". Then, doubl e-click on " Appearance and Personalization". 2. Click "Personalization" and then "Display Settings". 3. Click "Advanced Settings...".[...]

43 4. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for your monitor is completed. The monitor can be used as is. If the message "Windows needs..." is displayed, as shown in the figure below , click "Continue". 5. Click "Update Dr[...]

44 Windows XP 1. S tart Windows® XP 2. Click on the 'S tart' button and t hen click on 'Control Panel'. 3. Select and click on the categor y ‘Appearance and Themes’ 4. Click on the 'Display' Item.[...]

45 5. Select the 'Settings' tab then click on the 'Advanced' butt on. 6. Select 'Monitor' tab - If the 'Properties' button is inactive, it means your m onitor is properly configur ed. Please stop installation. - If the 'Properties' button is active, click on 'Properties' button. Please fol[...]

46 8. Select the 'Install from a list or specific location [ advanced]' radio button and then click on the 'Next' button. 9. Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button. 10. Click on the 'Have disk...' button, then click on the &a[...]

47 Windows 2000 1. S tart Windows® 2000 2. Click on the 'S tart' button, point to 'S ettings', and then click on 'Control Pane l'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select 'Monitor' - If the 'Properties'[...]

48 i-Menu Welcome to “i-Menu” software by AOC. i-Me nu makes it easy to adjust your monitor display setting by using o n screen menus instead of the OSD button on the monitor . T o complete installation, please follow the installation guide.[...]

49 T roubleshoot Problem & Question Possible Solutions Power LED Is Not ON Make sure the power button is ON and the Power Cord is properly connecte d to a grounded power outlet and to the monitor . No images on the screen Is the power cord connected properly? Check the power cord connection and po wer supply . Is the cable connected correctly? [...]

50 Monitor Is Stu ck In A ctive Off-Mode" The Computer Power Switch should be in the ON position. The Computer Video Card should be snugly fitted in its slot. Make sure the monitor's video cable is prop erly connected to the computer . Inspect the monitor's video cable and mak e sure no pin is bent. Make sure your computer is operati[...]

51 S pecification General S pecification Model number 2 3 41V g Driving system TFT Color L C D Viewable Image Size 5 8.5 cm diagoanl Pixel pitch 0.2 655 mm(H) x 0.2 655 mm(V) Video R, G , B Analog lnterface Separate Sy nc. H/V TTL Display Color 16.7M Colors Panel Dot Clock 1 48 . 5 MHz Horizontal scan range 30 kHz - 80 kHz Horizontal scan Size(Maxi[...]

52 Altitude: Operating 0~ 3 ,658 m (0~ 12, 000 ft ) Non-Operating 0~ 12,192 m (0~ 40, 000 ft ) Preset Display Modes STANDARD RESOLUTION HORIZONTAL FREQUENCY(KHz) VERTICAL FREQUENCY(Hz) VGA 640x480@60Hz 31.46 9kHz 59.94 Hz 640x480@72Hz 37.86 1kHz 72.809 Hz 640x480@75Hz 37.5kHz 75 Hz SVGA 800x600@56Hz 35.15 6kHz 56.25 Hz 800x600@60Hz 37.87 9kHz 60.31[...]

53 Pin Assignment s Pin Number 15-Pin Side of the Sign al Cable 1 Video-Red 2 Video-Green 3 Video-Blue 4 N.C. 5 Detect Cable 6 GND-R 7 GND-G 8 GND-B 9 +5V 10 Ground 11 N.C. 12 DDC-Serial data 13 H-sync 14 V- s y n c 15 DDC-Serial clock Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name 1 TMDS Data 2- 9 TMDS Da ta 1- 17 T MDS Data 0- 2 TMDS[...]

54 Plug and Play Plug & Play DDC2B Feature This monitor is equipped wi th VESA DDC2B capabilities according to the VESA DDC ST ANDARD. It allows the monitor to inform the host system of its identity and, dependi ng on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bi-directional data cha[...]

55 Regulation FCC Notice FCC Class B Radio Freq u ency Interference St at emen t W ARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to compl y with the limits for a Class B digit al device, pursuant t o Part 15 of the FCC Rules. These limits are designed to pr ovide reasonabl e protection against harmful interferenc[...]

56 WEEE Declaration Disposal of W aste Equipment by Users in Pr ivate Household in the Europe an Union. This symbol on the product or on its packaging indicates t hat this product must not be di sposed of with your other household wast e.Instead, it is your responsibility to dis pose of your waste equipment by hand ing it over to a designated coll [...]

57 EPEA T Declaration EPEA T is a system to help purchasers i n the public an d private sectors evaluate, compare and select desktop computers, notebooks and monitors ba sed on their environmental attributes . EPEA T also provides a clear and consistent set of performance criteria for the design of products, and provides an opportunit y for manufac[...]

58 Service W arranty S t atement for Europe LIMITED THREE-YEAR W ARRANTY* AOC Color Monitors sold within Europe AOC International (Europe) GmbH warrant s this product to be free from defects in material and workmanship for a period of Three (3) years after the original date of c onsumer purchase. During this per iod, AOC International (Europe) GmbH[...]

59 modified or altered; you bear the sole responsibility and liabilit y for any such modification or alteration. ALL E XPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE W ARRANT IES OF MERCHANT ABILITY AND FITNESS FOR A P ARTICULAR PURPOSE) ARE LIMITED IN DURA T ION TO A PERIOD OF THREE (3) YEARS FOR P ARTS AND L ABOR FROM THE ORIGINAL [...]

60 W arranty St atement for North & South America (excluding Brazil) W ARRANTY ST A T EMENT for AOC Color Monitors Including those Sold w ithin North America as S pecified Envision Peripherals, Inc. warrants this product to be free from defects in material and workmanship for a period of three (3) years for parts & labor and one (1) year fo[...]

61 ALL E XPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE W ARRANT IES OF MERCHANT ABILITY AND FITNESS FOR A P ARTICULAR PURPOSE) ARE LIMITED IN DURA T ION TO A PERIOD OF THREE (3) YEA RS FOR P ARTS AND LABOR AND ONE (1) YEAR FOR CRT TUBE OR LCD P ANEL FROM THE ORIGINAL DA TE OF CONSUMER PURCHASE. NO W ARRANTIES (EITHER EXPRESSED OR IM[...]

62 W arranty St atement for AP LIMITED THREE-YEAR W ARRANTY* AOC Color Monitors sold within AP AOC is one internal brand for its professional monitor ,T V technology ,af fordable pric e and available service .Customer satisfaction-oriented is always what we are pursuing . We provide 3 years standard warranty for AOC monitor an d 1-3 years stand ard[...]