Aspire Digital M261 manual

Aspire M1610/V eriton M261 Service Guide PRINTED IN T AIW AN Service guide files and updates are availab le on the AIPG/CSD web; for more in forma tion, please refer to http://csd.acer .com.tw[...]

II Revision History Please refer to the table below for the up dat es made on Aspire M1610/V eritonM261 service gui de. Date Chapte r Updates[...]

III Copyright Copyright © 2005 by Acer Incorporated. All rights rese rved. No part of this pub lication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any lan guage or computer language, in any form or by any means, electronic, mechanical, magne tic, optical, chemi cal, manual or otherwise, without th[...]

IV Conventions The following conventi ons are used in this manual: SCREEN MESSAGES Denotes actual messages that appear on screen. NOTE Gives bits and pieces of additional information related to the current topic. W ARNING Alerts you to any damage that might result from doing or not doing specific actions. CAUTION Gives precautionary measures to avo[...]

V Preface Before using this information and the product it s upports, please read the fo llowing general informa tion. 1. This Service Guide provides you with all techni cal information relating to the BASIC CONFIGUR A TION decided for Acer's "glo bal" product offering. T o better fit local market re quirements and enhance product co[...]

VI[...]

i System Specifications 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Mainboard Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

ii Machine Disassembly and Replacement 43 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 Disassembly Procedure . . . . . . . . . . . . . . . . . . . . . . . . [...]

Chapter 1 1 Features Operating System • Microsoft Windows Vist a (Home Basic, Home Premium, Business) Processor • Socket T ype: Intel ® Socket T LGA 775 pin • Processor T ype: • Intel ® Core 2 Duo 755 FSB 800/5 33 MHz • Intel ® Pentium 4/D 775 FSB 800/533 MHz • Intel ® Celeron/Cel eron D77 5 FSB 800/533 MHz Chip set • SiS 672+968 [...]

2 Chapter 1 FDD • Slot Quantity: 1 • Support 3.5” Devices IDE • Slot T ype: 40 pin P A T A IDE slot • Slot Quantity: 1 • T ransfer rate support: • PIO mode: 0 /1/2/3/4 • A T A mode: 33/66/100 port supported • Slot T ype: SA T A slot • Slot Quantity: 2 • T ransfer rate support: SA T A 1.5 Gb/s and SA T A 3.0 Gb/s • S torage T[...]

Chapter 1 3 • ACPI 2.0, • Provides DMI 2.0, WFM 2.0, WOL, and SM Bus for system management. I/O Connector • Controller: Super I/O ITE 8718F-FX with hardwa re monitor Rear I/O Connector • 1 PS/2 Keyboard Port • 1 PS/2 Mouse Port • 1 Parallel Port • 1 Serial Port • 1 VGA Port • 1 10/100/1000 L AN Port (RJ-45) • 1 1394 Port • 4 U[...]

4 Chapter 1 Mainboard Placement[...]

Chapter 1 5 Block Diagram[...]

6 Chapter 1 Aspire M1610 Front Panel The computer ’s front panel consists of the following: Label Description 1 Optical Device 2 3.5 inch Device 3 Power button 4 HDD LED 5L A N L E D 6 S peaker Out 7 Microphone 8U S B P o r t[...]

Chapter 1 7 Aspire M1610 Rear Panel The computer ’s rear panel consists of the following: Label Description Label Description 1 6 audio jacks (7.1 HD audio jack) 2 LAN Port 3 USB PORTS 4 1394 Port 5 CRT/LCD port 6 Parallel port 7 COM port 8 PS/2 keyboard 9 PS/2 mouse 10 Power cord Port 1 1 SPDIF Bracket 12 SPDIF Port 13 Recovery Switch Holder 14 [...]

8 Chapter 1 V eriton M261 Front Panel The computer ’s front panel consists of the following: Label Description 1 Power -Button 2 S peaker-out/Line-ou t Port 3 Microphone-in out (Front) 4 USB Ports 5 Optical drive 6 HDD LED 7 Power LED[...]

Chapter 1 9 V eriton M261 Rear Panel The computer ’s rear panel consists of the following: Label Description Label Desc ription 1 3 audio jacks 2 RJ45 port 3 CRT/LCD port 4 Serial port 5 Parallel port 6 USB PORTS 7 PS/2 keyboard 8 PS/2 mouse 9 Power cord Port 10 Recovery Switch Holder 1 1 Lock Handle[...]

10 Chapter 1 Hardware Specifications and Configurations Processor Support • Intel Core 2 Duo 755 FSB 800/533 MH z • Intel Pentium 4/D 775 FSB 800/5 33 MHz • Intel Celeron/Cele ron D 775 FSB 800/533MHz System Memory Interface Single Channel Memory Controller • Supports DDR2-667/533/400 • Supports two DIMMs • Up to 1GB per DIMM with maxim[...]

Chapter 1 11 • The smallest memory capacity possible is 128 MB, assuming Single-Channel Mode by using 256- Mb technology • Supports high throughput MuTIOL (Multi-Threaded I/O Link) • PCI-Express x16 Gra p hics i nt erfac e • One 16-lane PCI Express port intended for Graphics attach, fully compliant to the PC I Express Base S pecification re[...]

12 Chapter 1 • Audio Connectors/Hea ders • A T API analog line-level stereo ou tputs for Internal S peaker • V ertical connector for three mini-audio jacks (S tereo Line In, S tereo LINE Out, S tereo Microphone In) • Header for S tereo Line out and Mono Microphone In for front panel cabling option th at adhere s to the Intel® Front Pan el [...]

Chapter 1 13 • High Definition Audio 6 Ports Connector with Line In, Line Out, Microphone, Surround, CEN/LFE and Side-Surround V ertica l Au dio connector with Line In, Line Out and Microphone Power & Power Management T wo power manag ement mo des are supported in BIOS: Advanced Confi guration and Power Interface (ACPI 2.0) or Advanced Powe r[...]

14 Chapter 1 System BIOS LPC Bus The SST 49LF004B FWH or supporte d alterna tive LPCs will be implemented on the GDM03. Refer to the BIOS S pecification for sp ecific implementations. • Pm49FL004T - 33JCE • 4Mbit symmetrical Flash SPI Bus (default) • W25X40V AIZ • 4Mbit symmetrical Flash[...]

Chapter 2 15 Most systems are already configured by the ma nufac turer or the dealer . There is no need to run Setup when st ar ting the computer unless you get a Run Setup message. The Setup program load s configuration values i nto t he battery-backed n onvolatile memory ca lled CMOS RAM. This memory area is no t part of the system RAM. NOTE: If [...]

16 Chapter 2 Entering Setup Power on the computer and the system will st art POST (Power On Self T e st) process. When the message of “ Press DEL to enter SETUP ” appears on the screen, press the key of [Delete] to enter the setup menu. NOTE: If the message disappears before you respond and you st ill wish to enter Setup , restart the system by[...]

Chapter 2 17 The items in the main menu are explained bel ow: • Product Information — T o introduce the Product Name, S ystem P/N and MainBoard ID...etc. • St an da rd CMOS Features — The basic system configuration can be set up through this menu. • Advanced BIOS Features — The advanced system features can be set up through this menu. ?[...]

18 Chapter 2 Product Information The screen below appears if you select Product Information from the main menu: The Product Information menu contains general data about the system, such as the product name, serial number , BIOS version , etc. T hese information is necessary for troubleshooting (maybe required wh en asking for technical support). Th[...]

Chapter 2 19 S t andard CM OS Features Select Standard CMOS Features from the main menu to configure some basi c parameters in your system. The following screen shows the St a ndard CMOS Features menu: The following table describes the parameters found in this menu. Settings in boldface are the default and suggested settings. Parameter Description [...]

20 Chapter 2 IDE Channel 0/1 Master/Slave Leave this item at Auto to enable the system to automatically detect and configure IDE devices on the channel. If it fails to find a device, change the value to Manual and then manually configure the drive by entering the characterist ics of the drive in the items described below. Please noted that if you c[...]

Chapter 2 21 IDE Channel 0/1 Master The following screen shows the IDE Channel Master menu. NOTE: IDE Channel 0 and Channel 1 Master have the same option s , the onl y difference is the menu title. KLIJ :Move Enter: Select +/- /PU/PD :Value F10: Save and Exit ESC:Exit F1: General Help F 5: Previous Va lues F7: Optim ized Defaults Head 0 Precom p 0 [...]

22 Chapter 2 IDE Channel 0/1 Slave The following screen shows the IDE Channel Slave menu. NOTE: IDE Channel 0 and Channel 1 Slave have th e same options, the only difference is the menu title . KLIJ :Move Enter: Select +/- /PU/PD :Value F10: Save and Exit ESC:Exit F1: General Help F 5: Previous Va lues F7: Optim ized Defaults Head 0 Precom p 0 Land[...]

Chapter 2 23 SA T A Channel 1/2 Master The following screen shows the SA T A Channel Maste r menu. NOTE: SA T A Channel 1 an d Channel 2 Master have the same options, the only difference is the menu title. P hoen i x - A wardB IOS CMOS S et up Ut i l i t y IDE Channel 1 M as t er IDE HDD A ut o De t ec t i o n [ P r e s s E n t er ] It em Hel p I D[...]

24 Chapter 2 Advanced BIOS Features The following screen shows the Advanced BIOS Fea tures: The following table describes the parameters found in this menu. Settings in boldface are the default and suggested settings. Parameter Description Options CPU Feature Select to display CPU Feature. See “CPU Feature” on page 26 for more information. Pres[...]

Chapter 2 25 The advanced chipset features setup option is used to change the values of the chipset registers. These registers control most of the sy stem options in the comp uter . NOTE: Change these settings only if you are fa miliar with the chipset. First /Second/Third Boot Device The items allow you to set the sequence of boot device where BIO[...]

26 Chapter 2 CPU Feature The following screen shows the CPU Features me nu: Phoenix - AwardBIOS CMO S Setup Utility CPU Features Limit CPUID Max Val [Disabled] Item Help C1E Function [Auto] Execute Disable Bit [Enabled] Menu Level XX KLIJ :Move Enter: Select +/-/PU/PD :Value F10: Save and Ex it ESC:Exit F1: General Help F 5: Previous Va lues F7: Op[...]

Chapter 2 27 Hard Disk Boot Priority The following screen shows the Hard Disk Boot Priority me nu: down the list. Press <Esc> to exit this menu. Phoenix - AwardBIOS CMO S Setup Utility Hard Disk Boot Priority 1. Ch2 M. : ST3320820AS Item Help 2. Bootable Add-in Cards Menu Level XX Use < K > or < L > to select a devic e, then press[...]

28 Chapter 2 Advanced Chip set Features The following screen shows the Advanced Chi pset Features menu: Parameter Description Option Internal Graphic Control This submenu is used to set some parameters of graphics memory controller . See “Internal Graphic Control” on page 29 for more information. [Press Enter] Memory Hole at 15M-16M In order to[...]

Chapter 2 29 Internal Graphic Control The following screen shows the Internal Graphic Control menu: KLIJ :Move Enter: Select +/-/PU/PD :Value F10: Save and Ex it ESC:Exit F1: General Help F 5: Previous Va lues F7: Optim ized Defaults AGP Aperture Size [64 MB] Graphic Engine Cloc k 250 MHz Menu Level XX Graphic Mem ory Clock 250 MHz Phoenix - AwardB[...]

30 Chapter 2 Integrated Peripherals The following screen shows the Integrated Peripherals Feature s: Parameter Description Option Onboard IDE Device Use the arrow keys to select your options; press < Enter > key to enter the setup sub- menu. The menus and optio ns are shown below . [Press Enter] Onboard PCI Device [Press Enter] Onboard Super [...]

Chapter 2 31 Onboard IDE Device The following screen shows the Onboard IDE Devi ce menu: IDE Prim ary Master PIO [Auto] IDE Prim ary Slav e PIO [Auto] IDE Secondary Master PIO [Auto] IDE Secondary Slave PIO [Auto] Prim ary Master UltraDMA [Auto] Secondary Master UltraDMA [Auto] Phoenix - AwardBIOS CMO S Setup Utility Onboard IDE Device Serial ATA M[...]

32 Chapter 2 Onboard PCI Device The following screen shows the Onboard PCI Devi ce menu: KLIJ :Move Enter: Select +/- /PU/PD :Value F10: Save and Exit ESC:Exit F1: General Help F 5: Previous Va lues F7: O ptimized Defaults Onboard Lan Boot ROM [Enabled] Azalia Audio Controller [Azalia] Onboard LAN Controller [Enabled] USB Key board Support [Enabled[...]

Chapter 2 33 Onboard Super IO Device The following screen shows the Onboard Super IO Device menu: Phoenix - AwardBIOS CMO S Setup Utility Onboard Super IO Device Onboard FDC Controller [Enabled] Item Help Onboard Serial Port 1 [3F8/IRQ 4] Onboard Serial Port 2 [2F 8/IRQ3] Menu Level XX UART Mode Select [Nor mal] X UR2 Duplex Mode Half Onboard Paral[...]

34 Chapter 2 Power Management The Power Management menu lets you configure your system to most ef fe ctively save energ y while operating in a manner consistent w ith yo ur own style of computer use. The following screen shows the Power Manageme nt parameters and their default settings: The following table describes the parameters found in this men[...]

Chapter 2 35 ACPI Suspend T ype This item specifies the power saving modes fo r ACPI function. S1(POS): The S1 sleep mode is a low power state. In this state, no system context (CPU or chipset) is lost and hardware maintains all system context. S3 (STR): The S3 sleep mode is s power-down state in which power is supplied only to essential components[...]

36 Chapter 2 PnP/PCI Configuration The following screen shows the PnP/PCI Configurat ion parameters and their default settin gs: Parameter Description Options PCI/VGA Palette Snoop Disabled - Data read or written by the CPU is only directed to the PCI VGA device’s p alette registers. Enabled - Data read or written by the CPU is directed to both t[...]

Chapter 2 37 PC Health St atus The following screen shows the PC Health St atus parameters and their default settings: The following table describes th e parameters found in this menu: Parameter Description Options CPU W arning T emperature This item lets you select the temperature at which you want the system to send out a warning message to the P[...]

38 Chapter 2 Frequency/V olt age Control The following screen shows the Freque ncy and V oltage Control parameters and thei r default settings: The following table describes the parameters found in this menu. Settings in boldface are the default and suggested settings. Parameter Description Options Auto Detect DIMM/PCI Clk This option allows you to[...]

Chapter 2 39 Load Optimized Defaults This option opens a dialog box that lets you install defaults for all appropriate items in the Setup Utility . Press <Y> and then <Enter> to install the defau lts. Pre ss <N> and then <Enter> to not install th e defaults. The defaults place demands on the system that may be grea ter than [...]

40 Chapter 2 Set Supervisor/User Password When this function is selected, the following message appears at the center of the screen to assist you in creating a password. T ype the password, up to eight characters, and p r ess <Enter>. The password typed now will clear any previously entered password from CMOS memory . Y o u will be asked to c[...]

Chapter 2 41 Save & Exit Setup Highlight this item and press <Enter> to save the changes that you have m ade in the Setup Utility an d exit the Setup Utility . When the Save and Exit dialog box app ears, pr ess <Y> to save and exit, or press <N> to return to the main menu. X Frequency/Voltage Control X Integrated Peripherals S[...]

42 Chapter 2 Exit Without Saving Highlight this item and press <Enter> to discard any c hanges tha t you ha ve made in the Setup Utility and exit the Setup Utility . When the Exit With out Savi ng dialog box appears, pre ss <Y> to discard changes and exit, or press <N> to return to the main menu. NOTE: If you have made settings th[...]

Chapter 3 43 T o disassemble th e computer , you ne ed th e following tools: • Wrist grounding strap and conductive ma t for preventing electrostatic disch arge. • Wire cutter . • Phillips screwdriver (may require different size). NOTE: The screws for the di fferent components vary in size. During the disasse mbly process, group the screws wi[...]

44 Chapter 3 General Information Before Y ou Begin Before proceeding with the disassembly procedure, make su re that you do the following: 1. T urn off the power to the system and all peripherals. 2. Unplug the AC adapter and all power and signal cab les from the system.[...]

Chapter 3 45 Disassembly Procedure This section tells you how to disasse mble the system when yo u need to perform system service. Please also refer to the disassembly video, if available. CAUTION: Before you proceed, make sure you have turned of f the system and all periphe rals connec ted to it. Aspire M1610/V erit o n M261 Disassembly NOTE: The [...]

46 Chapter 3 4. Disconnect the front bezel LED cab le. 5. Disconnect the audio cables. 6. Disconnect the USB cable. 7. Disconnect the Card Reader cab le.[...]

Chapter 3 47 8. Disconnect the P A and PD pow er-cable from the MB connecto r . 9. Disconnect P1 power cable and FDD data cable. 10. Disconnect the ODD power a nd data cables.[...]

48 Chapter 3 11 . Disconnect the HDD power and data cables. 12. Disconnect the System Fan power-cabl e from the MB conn ector . 13. Disconnect the HDD by rai ling the HDD-holder a s shown. Remove the HDD from the chassis.[...]

Chapter 3 49 14. Release the three latches on the front bezel, then remove the fro nt bezel. 15. Disconnect the ODD by railing the ODD-holder as show n belo w . Remove the ODD from the chassis. 16. Release the CPU cooler from the MB by removing the four securing screws. Aspire M1610 Front Bezel V eriton M261 Front Bezel[...]

50 Chapter 3 17. Disconnect the CPU Cooler power-cable from the MB conne ctor . 18. Release the memory . 19. Remove the System F AN by releasing the four scr ews shown then removing th e fan from the chassis.[...]

Chapter 3 51 20. Remove the CPU by releasing the CPU Latch on the Socket and then disconnectin g th e CPU. 21. Remove the motherboard by releasing the six screws shown th en lifting MB clear of the chassis. 22. Remove the power-supply b y releasing the four screw s shown then lifting the Power-supply clear of the chassis.[...]

52 Chapter 3 Reassembly Procedure Aspire M1610/V erit o n M261 Reassembly NOTE: The only physical difference between the tw o models is the front bezel as shown in the procedures. 1. Install the Power-supply by fitting the Power-supply in to the chassis, then fast en the four screws shown. 2. Install the mainboard by aligning the I/O connector with[...]

Chapter 3 53 4. Fit the System Fan into the chassis, then fasten the four screws shown. 5. Install the Memory . 6. Fit the CPU cooler to the MB and fasten four screws shown.[...]

54 Chapter 3 7. Connect the CPU Cooler power-cable to the MB connector . 8. Connect the System Fan power-cable to the MB connector . 9. Install the ODD into the chassis and slide the ODD rail to lock it. 10. Install the FDD and slide the FDD rail to lock it.[...]

Chapter 3 55 11 . Install the front beze l . 12. Install the HDD into the chassis and slide th e HDD rail to lock it. 13. Connect the HDD data cable and p ower-cable to the rear of HDD. Aspire M1610 Front Bezel V eriton M261 Front Bezel[...]

56 Chapter 3 14. Connect the ODD data cable and pow er-cable to the rear of ODD. 15. Connect the P1 power-cable and FDD data cable to the MB connector . 16. Connect the P A and PD powe r-ca ble to the MB connector .[...]

Chapter 3 57 17. Connect the USB cables. 18. Connect the Card R eader cable. 19. Connect the AUDIO cables. 20. Connect the front bezel LED cable.[...]

58 Chapter 3 21. Install the TV&VG A&MODEM card. 22. Close the system.[...]

Chapter 4 59 Please refer to generic troubleshooting guide for troubleshooting i nformation relating to followi ng topics: • Power-On Self-T est (POST) • POST Check Points • POST Error Messages List • Error Symptoms List Chapter 4 T roubleshooting[...]

60 Chapter 4[...]

Chapter 5 61 Mainboard Jumper Locations Item Name Description Item Name Description 1 FP1 Front panel header 1 1 INTR C hassis Intrusion alarm jumper 2 COM2 COM header 12 CPU_F AN C PU fan power header 3 SA T A2 SA T A data transfer connector 2 13 F_AUDIO Front panel Audio header 4 SA T A1 SA T A data transfer connector 1 14 SPEAKER Internal speake[...]

62 Chapter 5 Jumper Settings This section explains how to set jumpers for correct configuration of the main board. Setting Jumpers Use the motherboard ju mpers to set system configuration op tions. Jumpers with mo re than one pin are numbered. When setting the jumpers, ensure th at the jumper caps are placed on th e co rrect pins. System Board J um[...]

Chapter 5 63 Front USB Front Audio Illustration Pin Signal Name Description 1 VREG_FP_USBP WR0 Front Panel USB Power(Ports 0,1) 2 VREG_FP_USBP WR0 Front Panel USB Power(Ports 0,1) 3 USB_FP_P0- Front Panel USB Port 0 Negative Signal 4 USB_FP_P1- Front Panel USB Port 1 Negative Signal 5 USB_FP_P0+ Front Panel USB Port 0 Positive Signal 6 USB_FP_P1+ F[...]

64 Chapter 5 Front 1394 Internal Speaker Sys F AN (3pin) Illustration Pin Signal Name 1 TP A+ 2 TP A- 3 Ground 4 Ground 5 TPB+ 6 TPB- 7 +12V(Fused) 8 +12V(Fused) 9 Key 10 Ground Silk Screen Footprin t Schematic Part F_1394 H2X5MZO9 HEAD ER_2X5_9 Illustration Pin Signal Name 1M O N O - L 2 Ground 3M O N O - R 4K e y 5 Ground 6 Ground 7V C C Silk Scr[...]

Chapter 5 65 CPU F AN (4pin) Clear CMOS Intruder J3 (for customer Acer requested) Illustration Pin Signal Name 1 Ground 2 F AN POWER 12V 3 SIO F ANSPD 4F A N O U T 5K e y Silk Screen Footprin t Schematic Part CPU_F AN HF AN4M_M1 C ONN3(F AN4P) Illustration Description Pin Signal Name 3 Pin 1G r o u n d 2 RTCRST J (Connect to ICH) Normal (Default) S[...]

66 Chapter 5 J4 (for customer Acer requested) SPDIF_OUT IRDA Illustration Pin Signal Name 1A G P I O 2 2G r o u n d Silk Screen Footpr int Schematic Part INTR H2M HEADER_1X2 Illustration Pin Signal Name 1 5V_SYS 2 KEY 3 SPDIF_OUT 4G N D Silk Screen Footprint Schematic Part SPDIF_OUT H4MO2 HEADER_1X4_K2 Illustration Pin Signal Name 1 5V_SB 2 IR_26 3[...]

Chapter 5 67 COM2 Illustration Pin Signal Name 1 NDCDB 2 NSINB 3 NSOUTB 4 NDTRB 5 GND 6 NDSRB 7 NRTSB 8 NCTSB 9 NRIB 10 KEY Silk Screen Footprint Schematic Part COM2 H2X5MZO10 Header_2X5_10[...]

68 Chapter 5[...]

Chapter 6 69 This chapter gives you the FRU (Field Replac eabl e Unit) listing in global configurations of Aspire M161 0/ V eriton M261 . Refer to this chapter whenever ordering for parts to rep air or for RMA (Return Merchandise Authorization). NOTE: Please note WHEN ORDERING FRU P ARTS, that you should check the most up-to-date information availa[...]

70 Chapter 6 Exploded Diagrams Aspire M1610 Item Description Item Decription 1 AM10 Main Bezel 10 Power Supply 2 3.25” Cover 1 1 Fan 3 5.25” Cover 12 PCI Bracket 4 USB Shielding 13 Left Side Door 5 USB PCB-ASM 14 Motherboard 6 FDD Lock Slide 15 HDD Lock Slide 7 CD ROM Lock Slide 16 HDD 8 Chassis 17 3.5” Device 9 Right Side Door 18 CD ROM[...]

Chapter 6 71 V eriton M261 Item Description Item Decription 1 3.5” Filler Panel 10 CD ROM Lock Slide 2 5.25” Rot ate Cover 1 1 USB Board 3 V541 Bezel 12 USB Bracket 4C D R O M 1 3 R i g h t S i d e 5 FDD w/Panel 14 Chassis 6 HDD Disk 15 Power Supply 7 Mothboard 16 Fan 8 HDD Lock Slide 17 PCI Bracket 9 FDD Lock Slide 18 Left Side[...]

72 Chapter 6 Part s Lists The SPL will update later[...]