Asrock P55M Pro manual

1 1 1 1 1 P55M Pro User Ma nual V ersion 1.1 Published August 2009 Copyright©2009 ASRock INC. All rights reserved.[...]

2 2 2 2 2 Copyright Notice: Copyright Notice: Copyright Notice: Copyright Notice: Copyright Notice: No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purcha ser for ba ckup purpose, without written con sent of ASRock Inc. Product[...]

3 3 3 3 3 Contents Contents Contents Contents Contents 1 Introduction 1 Introduction 1 Introduction 1 Introduction 1 Introduction ................................................... ................................................... ................................................... ................................................... ............[...]

4 4 4 4 4 2.18.2 Installing Windows ® Vista TM / Vista TM 64-bit Without RAID Functions .................................................. 42 2.19 U ntied Overclocking T echnology ................................... 43 3 BIOS S 3 BIOS S 3 BIOS S 3 BIOS S 3 BIOS S ETUP UTILITY ETUP UTILITY ETUP UTILITY ETUP UTILITY ETUP UTILITY ....................[...]

5 5 5 5 5 Chapter 1: Introduction Chapter 1: Introduction Chapter 1: Introduction Chapter 1: Introduction Chapter 1: Introduction Tha nk you for purcha sing ASRock P55M Pro motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performa nce with robust design conf orming to ASRock[...]

6 6 6 6 6 1.2 1.2 1.2 1.2 1.2 Specifications Specifications Specifications Specifications Specifications Platform - Micro A TX Form Fa ctor: 9.6-in x 8.8-in, 24.4 cm x 22.4 cm - All Solid Ca pa citor design (100% Ja pan-ma de high-quality Conductive Polymer Ca pa citors) CPU - Supports the Intel ® Core TM i7 and Intel ® Core TM i5 Processors in t[...]

7 7 7 7 7 Connector - 4 x SA T AII 3.0Gb/s connectors, support RAID (RAID 0, RAID 1, RAID 10, RAID 5 a nd Intel Matrix Storage), NCQ, AHCI and “Hot Plug” functions (see CAUTION 7 ) - 1 x A T A133 IDE connector (supports 2 x IDE devices) - 1 x Floppy connector - 1 x IR header - 1 x Print Port header - 1 x COM port header - 1 x HDMI_SPDIF header [...]

8 8 8 8 8 CAUTION! 1. About the setting of “Hyper Thre ading T echnology”, ple ase che ck page 50. 2. This motherboard supports U ntied Overclocking T e chnology . Plea se read “U ntied Overclocking T echnology” on page 43 f or details. 3. This motherboard supports Dual Cha nnel Me mory T echnology . Before you imple ment Dual Cha nnel Memo[...]

9 9 9 9 9 10. Featuring an advanced proprietary hardware and software design, Intelligent Energy Saver is a revolutionary technology that delivers unparalleled power savings. In other words, it is able to provide exceptional power saving and improve power efficiency without sacrificing computing performa nce. Plea se visit our website for the opera[...]

10 10 10 10 10 1.3 1.3 1.3 1.3 1.3 T T T T T wo CrossF wo CrossF wo CrossF wo CrossF wo CrossF ireX ireX ireX ireX ireX TM TM TM TM TM Graphics Card Suppor Graphics Card Suppor Graphics Card Suppor Graphics Card Suppor Graphics Card Suppor t List t List t List t List t List (for Windows ® XP / XP 64-bit / Vista TM / Vista TM 64-bit) Chipset Model [...]

11 11 11 11 11 1.4 Motherboard Layout 1.4 Motherboard Layout 1.4 Motherboard Layout 1.4 Motherboard Layout 1.4 Motherboard Layout 22.4cm (8.8 in) 24.4cm (9.6 in) DDR3_A2 (64 bit, 240-pin module) DDR3_A1 (64 bit, 240-pin module) DDR3_B2 (64 bit, 240-pin module) DDR3_B1 (64 bit, 240-pin module) A TXPWR1 ATX12V1 PS2_USB_PWR1 1 PS2 Mouse Coaxial SPDIF [...]

12 12 12 12 12 1 24 3 5 6 7 8 9 10 11 12 13 14 15 16 1.5 1.5 1.5 1.5 1.5 I/O Panel I/O Panel I/O Panel I/O Panel I/O Panel ** If you use 2-channel spe a ker, plea se connect the speaker’s plug into “Front Spe aker Ja ck”. See the table below for connection details in accordance with the type of speaker you use. T ABLE for Audio Output Connect[...]

13 13 13 13 13 T o enable Multi-Stre a ming function, you need to connect a front pa nel audio cable to the front panel audio header. After restarting your computer, you will find “VIA HD Audio Deck” tool on your system. Ple a se follow below instruction s according to the OS you in stall. For Windows ® XP / XP 64-bit OS: Plea se click “VIA [...]

14 14 14 14 14 Chapter 2: Installation Chapter 2: Installation Chapter 2: Installation Chapter 2: Installation Chapter 2: Installation This is a Micro A TX form fa ctor (9.6" x 8.8", 24.4 x 22.4 cm) motherboard. Before you install the motherboard, study the configuration of your cha ssis to ensure that the motherboard fits into it. Make s[...]

15 15 15 15 15 2.3 CPU Installation 2.3 CPU Installation 2.3 CPU Installation 2.3 CPU Installation 2.3 CPU Installation For the installation of Intel 1 156-Pin CPU, plea se follow the steps below . Before you insert the 1 156-Pin CPU into the socket, plea se check if the CPU surface is unclean or if there is any bent pin on the socket. Do not force[...]

16 16 16 16 16 black line Pin1 alignment key alignment key Pin1 1156-Pin CPU 1156-Pin Socket Step 3. In sert the 1 156-Pin CPU: Step 3-1. Hold the CPU by the edge where is marked with bla ck line. Step 3-2. Orient the CPU with IHS (Integrated Heat Sink) up. Locate Pin1 a nd the two ori- entation key notches. For proper inserting, ple a se ensure to[...]

17 17 17 17 17 2.4 2.4 2.4 2.4 2.4 Installation of CPU Fan and Heatsink Installation of CPU Fan and Heatsink Installation of CPU Fan and Heatsink Installation of CPU Fan and Heatsink Installation of CPU Fan and Heatsink This motherboard is equipped with 1 156-Pin socket that supports Intel 1 156-Pin CPU. Plea se adopt the type of heatsink a nd cool[...]

18 18 18 18 18 2.5 Installation of Memory Modules (DIMM) 2.5 Installation of Memory Modules (DIMM) 2.5 Installation of Memory Modules (DIMM) 2.5 Installation of Memory Modules (DIMM) 2.5 Installation of Memory Modules (DIMM) This motherboard provides f our 240-pin DDR3 (Double Data Rate 3) DIMM slots, a nd supports Dual Channel Memory T echnology .[...]

19 19 19 19 19 notch break notch break Installing a DIMM Installing a DIMM Installing a DIMM Installing a DIMM Installing a DIMM Plea se make sure to disconnect power supply before a dding or removing DIMMs or the system components. Step 1. Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the no[...]

20 20 20 20 20 2.6 Expansion Slots (PCI and PCI Express Slots) 2.6 Expansion Slots (PCI and PCI Express Slots) 2.6 Expansion Slots (PCI and PCI Express Slots) 2.6 Expansion Slots (PCI and PCI Express Slots) 2.6 Expansion Slots (PCI and PCI Express Slots) There are 1 PCI slot and 3 PCI Express slots on this motherboard. PCI slot: PCI slot is used to[...]

21 21 21 21 21 1. If a customer incorrectly configures their system they will not see the performa nce benefits of CrossFireX TM . All three CrossFireX TM components, a CrossFireX TM Rea dy gra phics card, a CrossFireX TM Rea dy motherboard and a CrossFireX TM Edition co-processor gra phics card, must be installed correctly to benefit from the Cros[...]

22 22 22 22 22 CrossFire Bridge Step 2. Connect the D VI monitor cable to the D VI connector on the Ra deon gra phics card on PCIE1 slot. (Y ou may use the D VI to D-Sub ada pter to convert the D VI connector to D-Sub interfa ce, and then conne ct the D-Sub monitor cable to the D VI to D-Sub ada pter .) Step 2. Connect two Ra deon gra phics cards b[...]

23 23 23 23 23 Step 6. Double-click “A TI Catalyst Control Center”. Click “View”, select “CrossFireX TM ”, and then che ck the item “Enable CrossFireX TM ”. Select the option a ccording to the total GPU number on the Radeon gra phics cards. Click “Apply”. The Catalyst U ninstaller is an optional download. W e recommend using thi[...]

24 24 24 24 24 Although you have selected the option “Enable CrossFire TM ”, the CrossFireX TM function may not work a ctually . Y our computer will automatically reboot. After restarting your computer , plea se confirm whether the option “Enable CrossFire TM ” in “A TI Catalyst Control Center” is selected or not; if not, plea se select[...]

25 25 25 25 25 2.9 Jumpers Setup 2.9 Jumpers Setup 2.9 Jumpers Setup 2.9 Jumpers Setup 2.9 Jumpers Setup The illustration shows how jumpers are setup. When the jumper ca p is pla ced on pins, the jumper is “Short”. If no jumper ca p is pla ced on pins, the jumper is “Open”. The illustration shows a 3-pin jumper whose pin1 a n d pin2 are “[...]

26 26 26 26 26 2.10 Onboard Headers and Connectors 2.10 Onboard Headers and Connectors 2.10 Onboard Headers and Connectors 2.10 Onboard Headers and Connectors 2.10 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper ca ps over these headers a nd connectors. Pla cing jumper ca ps over the hea ders and c[...]

27 27 27 27 27 Infrared Module Header This hea der supports an optional (5-pin IR1) wireless tra nsmitting and (see p.1 1 No. 24) receiving infrared module. USB 2.0 Headers Besides six default USB 2.0 (9-pin USB12_13) ports on the I/O panel, there are (see p.1 1 No. 16) three USB 2.0 headers on this motherboard. Ea ch USB 2.0 header can support two[...]

28 28 28 28 28 Cha ssis a nd Power Fan Conne ctors Ple a se connect the fa n cables (4-pin CHA_FAN1) to the fan connectors and (see p.1 1 No. 20) match the bla ck wire to the ground pin. (3-pin PW R_FAN1) (see p.1 1 No. 4) GND PWRBTN# PLED- PLED+ DUMMY RESET# GND HDLED+ HDLED- 1 System Panel Header This header a ccommodates (9-pin P ANEL1) several [...]

29 29 29 29 29 20-Pin A TX Power Supply Installation Though this motherboard provides 24-pin A TX power connector , it ca n still work if you adopt a tradition al 20-pin A TX power supply . T o use the 20-pin A TX power supply , plea se plug your power supply along with Pin 1 a nd Pin 13. 12 1 24 13 Though this motherboard provides 4-Pin CPU fan (Q[...]

30 30 30 30 30 HDMI_SPDIF Cable P l ease connect the bla ck end (A) (Optional) of HDMI_SPDIF cable to the HDMI_SPDIF header on the motherboard. Then connect the white end (B or C) of HDMI_SPDIF cable to the HDMI_SPDIF connector of HDMI V GA card. A. bla ck end B. white end (2-pin) C. white end (3-pin) C B GND +5V SPDIFOUT blue black blue black GND [...]

31 31 31 31 31 2.11 HDMI_SPDIF Header Connection Guide 2.11 HDMI_SPDIF Header Connection Guide 2.11 HDMI_SPDIF Header Connection Guide 2.11 HDMI_SPDIF Header Connection Guide 2.11 HDMI_SPDIF Header Connection Guide HDMI (High-Definition Multi-medi a Interfa ce) is an all-digital audio/video specification, which provides a n interfa ce between a ny [...]

32 32 32 32 32 2.12 SA 2.12 SA 2.12 SA 2.12 SA 2.12 SA T T T T T AII Hard Disk Setup Guide AII Hard Disk Setup Guide AII Hard Disk Setup Guide AII Hard Disk Setup Guide AII Hard Disk Setup Guide Before installing SA T AII hard disk to your computer , plea se carefully read below SA T AII hard disk setup guide. Some default setting of SA T AII hard [...]

33 33 33 33 33 2.13 2.13 2.13 2.13 2.13 Serial A Serial A Serial A Serial A Serial A T T T T T A (SA A (SA A (SA A (SA A (SA T T T T T A) / Serial A A) / Serial A A) / Serial A A) / Serial A A) / Serial A T T T T T AII (SA AII (SA AII (SA AII (SA AII (SA T T T T T AII) Hard Disks AII) Hard Disks AII) Hard Disks AII) Hard Disks AII) Hard Disks Insta[...]

34 34 34 34 34 2.14 Hot Plug and Hot Swap F 2.14 Hot Plug and Hot Swap F 2.14 Hot Plug and Hot Swap F 2.14 Hot Plug and Hot Swap F 2.14 Hot Plug and Hot Swap F unctions for SA unctions for SA unctions for SA unctions for SA unctions for SA T T T T T A / SA A / SA A / SA A / SA A / SA T T T T T AII AII AII AII AII HDDs HDDs HDDs HDDs HDDs This mothe[...]

35 35 35 35 35 Caution 1. Without SA T A 15-pin power connector interfa ce, the SA T A / SA T AII Hot Plug cannot be processed. 2. Even some SA T A / SA T AII HDDs provide both SA T A 15-pin power connector a nd IDE 1x4-pin conventional power connector interfa ces, the IDE 1x4-pin conventional power connector interfa ce is definitely not able to su[...]

36 36 36 36 36 How to Hot Plug a SA T A / SA T AII HDD: Points of attention, before you process the Hot Plug: Plea se do follow below instruction sequence to proce ss the Hot Plug, improper procedure will cause the SA T A / SA T AII HDD da mage and data loss. Connect SA T A data ca ble to the motherboard’s SA T AII connector . Connect SA T A 15-p[...]

37 37 37 37 37 2.16 2.16 2.16 2.16 2.16 Driver Installation Guide Driver Installation Guide Driver Installation Guide Driver Installation Guide Driver Installation Guide T o install the drivers to your system, plea se insert the support CD to your optical drive first. Then, the drivers compatible to your system can be auto-detected and listed on th[...]

38 38 38 38 38 If you wa nt to use “Intel Matrix Storage Ma nager” in Windows ® environment, plea se install “SA T AII driver” from the Support CD again so that “Intel Matrix Storage Ma nager” will be installed to your system a s well. After the installation of Windows ® XP / Windows ® XP-64bit OS, if you wa nt to manage RAID functio[...]

39 39 39 39 39 2.17.3 Migrating a “RAID Ready” System to RAID 0, 2.17.3 Migrating a “RAID Ready” System to RAID 0, 2.17.3 Migrating a “RAID Ready” System to RAID 0, 2.17.3 Migrating a “RAID Ready” System to RAID 0, 2.17.3 Migrating a “RAID Ready” System to RAID 0, RAID 1 or RAID 5 RAID 1 or RAID 5 RAID 1 or RAID 5 RAID 1 or RAID[...]

40 40 40 40 40 2.17.4 Installing Windows 2.17.4 Installing Windows 2.17.4 Installing Windows 2.17.4 Installing Windows 2.17.4 Installing Windows ® Vista Vista Vista Vista Vista TM TM TM TM TM / Vista / Vista / Vista / Vista / Vista TM TM TM TM TM 64-bit With 64-bit With 64-bit With 64-bit With 64-bit With RAID Functions RAID Functions RAID Functio[...]

41 41 41 41 41 STEP 1: Set Up BIOS. A. Enter BIOS SETUP UTILITY Advanced screen Storage Configuration. B. Set the option “SA T AII Operation Mode” to [AHCI]. STEP 2: Ma ke a SA T A / SA T AII driver diskette. Plea se ma ke a SA T A / SA T AII driver diskette by following section 2.17.1 ste p 2 on page 37. STEP 3: Install Windows ® XP / XP 64-b[...]

42 42 42 42 42 2.18.2 Installing Windows 2.18.2 Installing Windows 2.18.2 Installing Windows 2.18.2 Installing Windows 2.18.2 Installing Windows ® Vista Vista Vista Vista Vista TM TM TM TM TM / Vista / Vista / Vista / Vista / Vista TM TM TM TM TM 64-bit 64-bit 64-bit 64-bit 64-bit Without RAID Functions Without RAID Functions Without RAID Function[...]

43 43 43 43 43 2.19 2.19 2.19 2.19 2.19 Untied Overclocking T Untied Overclocking T Untied Overclocking T Untied Overclocking T Untied Overclocking T echnology echnology echnology echnology echnology This motherboard supports U ntied Overclocking T echnology , which mean s during overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses.[...]

44 44 44 44 44 Chapter 3: BIOS SETUP UTILITY Chapter 3: BIOS SETUP UTILITY Chapter 3: BIOS SETUP UTILITY Chapter 3: BIOS SETUP UTILITY Chapter 3: BIOS SETUP UTILITY 3.1 3.1 3.1 3.1 3.1 Introduction Introduction Introduction Introduction Introduction This section explains how to use the BIOS SETUP UTILITY to configure your system. The BIOS FWH chip [...]

45 45 45 45 45 BIOS SETUP UTILITY Main OC Tweaker H/W Monitor Boot Security Exit Advanced System Overview System Time System Date [ :00:09] [T ue 07/14/2009] Use [Enter], [T AB] or [SHIFT -T AB] to select a field. Use [+] or [-] to configure system Time. Select Screen Select Item +- Change Field T ab Select Field F1 General Help F9 Load Defaults F1[...]

46 46 46 46 46 3.3 3.3 3.3 3.3 3.3 OC T OC T OC T OC T OC T weak weak weak weak weak er Screen er Screen er Screen er Screen er Screen In the OC T wea ker screen, you can set up overclocking fe atures. BIOS SETUP UTILITY Main Advanced H/W Monitor Boot Security Exit Overclocking may cause damage to your CPU and motherboard. It should be done at your[...]

47 47 47 47 47 CPU Ratio Setting If the ratio status is unlocked, you will find this item a ppear to allow you changing the ratio value of this motherboard. QPI Frequency Use this item to select QPI frequency. Configuration options: [Auto], [4.800GT] and [4.266GT]. The default value is [Auto]. DRAM Frequency If [Auto] is selected, the motherboard w[...]

48 48 48 48 48 DRAM tWR This controls the number of DRAM clocks f or TW R. Configuration options: Configuration options: [Auto], [3] to [15]. DRAM tWTR This controls the number of DRAM clocks f or TWTR. Configuration option s: Configuration options: [Auto], [2] to [10]. DRAM tRRD This controls the number of DRAM clocks for TRRD. Conf iguration opti[...]

49 49 49 49 49 Setting wrong values in this section may cause the system to malfunction. 3.4 3.4 3.4 3.4 3.4 Advanced Screen Advanced Screen Advanced Screen Advanced Screen Advanced Screen In this section, you may set the configurations for the following items: CPU Configuration, Chipset Conf iguration, ACPI Configuration, IDE Configuration, PCIPnP[...]

50 50 50 50 50 3.4.1 3.4.1 3.4.1 3.4.1 3.4.1 CPU Configuration CPU Configuration CPU Configuration CPU Configuration CPU Configuration CPU Ratio Setting If the ratio status is unlocked, you will find this item a ppear to allow you changing the ratio value of this motherboard. Enhance Halt State All processors support the Halt State (C1). The C1 sta[...]

51 51 51 51 51 Intel (R) T urboMode tech Use this item to ena ble or disable Intel (R) T urbo Boost T echnology . T urbo mode allows processor cores to run fa ster tha n marked frequency in specific condition. The default value is [Enabled]. Intel (R) C-ST A TE tech. Intel (R) C-ST A TE tech. is a chieved by ma king the power and thermal con- trol [...]

52 52 52 52 52 BIOS SETUP UTILITY Chipset Settings Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. Advanced Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit ENABLE: Allow remapping of[...]

53 53 53 53 53 BIOS SETUP UTILITY ACPI Configuration Select auto-detect or disable the STR feature. Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. Advanced Suspend T o RAM Restore on AC/Power Loss Ring-In Power On PCI Devices Power On P[...]

54 54 54 54 54 BIOS SETUP UTILITY Storage Configuration v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. Advanced SA T AII Operation Mode SA T AII_1 SA T AII_2 SA T AII_3 SA T AII_4 SA T AII_5 SA T AII_6 eSA T AII_1 eSA T AII_2 IDE1 Master IDE1 Slave [IDE] [Hard Disk] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detecte[...]

55 55 55 55 55 [CD/D V D]: This is used for IDE CD/D V D drives. [ARMD]: This is used f or IDE ARMD (A T API Removable Medi a Device), such a s MO. LBA/Large Mode Use this item to select the LBA/Large mode for a hard disk > 512 MB under DOS a nd Windows; f or Netware and UNIX user , select [Disabled] to disable the LBA/Large mode. Block (Multi-S[...]

56 56 56 56 56 BIOS SETUP UTILITY Advanced PCI / PnP Settings V alue in units of PCI clocks for PCI device latency timer regi ste r . Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. PCI Latency Timer PCI IDE BusMaster [64] [Enabled] Adva[...]

57 57 57 57 57 3.4.6 3.4.6 3.4.6 3.4.6 3.4.6 Floppy Configuration Floppy Configuration Floppy Configuration Floppy Configuration Floppy Configuration In this section, you may configure the type of your floppy drive. 3.4.7 3.4.7 3.4.7 3.4.7 3.4.7 Super IO Configuration Super IO Configuration Super IO Configuration Super IO Configuration Super IO Con[...]

58 58 58 58 58 Parallel Port Address Use this item to set the address for the onboard parallel port or disable it. Configuration options: [Disabled], [378], and [278]. Parallel Port Mode Use this item to set the operation mode of the parallel port. The default value is [ECP+EPP]. If this option is set to [ECP+EPP], it will show the EPP version in t[...]

59 59 59 59 59 3.4.8 3.4.8 3.4.8 3.4.8 3.4.8 USB Configuration USB Configuration USB Configuration USB Configuration USB Configuration USB Controller Use this item to enable or disable the use of USB controller. Legacy USB Support Use this option to select lega cy support for USB device s. There are f our configuration options: [Ena bled], [Auto], [...]

60 60 60 60 60 BIOS SETUP UTILITY Hardware Health Event Monitoring Select Screen Select Item F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. CPU T emperature M/B T emperature CPU Fan Speed Chassis Fan Speed Power Fan Speed Vcore + 3.30V + 5.00V + 12.00V : 3 7C/9 8F :N / A : 3 1C/[...]

61 61 61 61 61 3.6.1 3.6.1 3.6.1 3.6.1 3.6.1 Boot Settings Configuration Boot Settings Configuration Boot Settings Configuration Boot Settings Configuration Boot Settings Configuration Full Screen Logo Use this item to enable or disable OEM Logo. The default value is [Enabled]. AddOn ROM Display Use this option to adjust AddOn ROM Display . If you [...]

62 62 62 62 62 BIOS SETUP UTILITY Main OC T weaker Advanced H/W Monitor Boot Exit Install or Change the password. Select Screen Select Item Enter Change F1 General Help F10 Save and Exit ESC Exit F9 Load Defaults v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. Security Change Supervisor Password Change User Password Security Settings Supe[...]

63 63 63 63 63 BIOS SETUP UTILITY Main OC T weaker Advanced H/W Monitor Boot Security Exit system setup after saving the changes. F 1 0k e yc a nb eu s e d for this operation. Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit F9 Load Defaults v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. Exit Sa[...]

64 64 64 64 64 Chapter 4: Sof Chapter 4: Sof Chapter 4: Sof Chapter 4: Sof Chapter 4: Sof tware Suppor tware Suppor tware Suppor tware Suppor tware Suppor t t t t t 4.1 4.1 4.1 4.1 4.1 Install Operating System Install Operating System Install Operating System Install Operating System Install Operating System This motherboard supports various Micros[...]