Asus P5SD2-FM manual

P5SD2-FM Motherboard[...]

2 E2471 First Edition V1 March 2006 Cop Cop Cop Cop Cop yright © 2006 yright © 2006 yright © 2006 yright © 2006 yright © 2006 ASUST ASUST ASUST ASUST ASUST eK COMPUTER INC eK COMPUTER INC eK COMPUTER INC eK COMPUTER INC eK COMPUTER INC . . . . . All Rights R All Rights R All Rights R All Rights R All Rights R eser eser eser eser eser v v v v v[...]

3 Contents Notices ................................................................................................ vi Safety information ............................................................................. vii P5SD2-FM specifications summary ................................................ x Chapter 1: Product introduction 1.1 Before you [...]

4 Chapter 2: 2.1 BIOS setup 2.2 BIOS setup program ............................................................ 2-02 2.2.1 BIOS menu screen ................................................. 2-03 2.2.2 Menu bar ............................................................... 2-03 2.2.3 Navigation keys .................................................[...]

5 Contents 2.5 Power menu ........................................................................ 2-18 2.5.1 ACPI Aware ....................................................... 2-18 2.5.2 Suspend Modet ................................................. 2-18 2.5.3 Respost Video on S3 Resume ............................................... 2-18 2.5.4 A[...]

6 Notices The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifi cations to this unit not expressly approved by the part responsible for compliance could void the user¼s authority to operate this equipment. Canadian Department of Communications Statemen[...]

7 Safety information Electrical safety Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package. • Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately [...]

8 P5SD2-FM specifications summary LGA775 socket for Intel Pentium ® D/Intel ® Pentium ® 4/Celeron processors Compatible with Intel ® Performance Universal FMB Supports Intel ® Hyper-Threading T echnology Supports Intel ® Extreme Edition Northbridge: SiS 649DX Southbridge: SiS 966 800/533 MHz 2 x 240-pin DIMM sockets support up to 2GB of unbuf[...]

9 P5SD2-FM specifications summary 4 x USB connectors 1 x CPU fan connector 1 x Chassis fan connector 1 x 24-pin EA TX power connector 1 x 4-pin A TX 12 V power connector 1 x Internal audio connector 1 x Front panel audio connector 1 x S/PDIF out connector 1 x System panel connector Device drivers ASUS PC Probe II ASUS Live Update utility uA TX form[...]

10[...]

1 Hardware information This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard.[...]

1-2 Chapter 1: Hardware information 1.1 Before you proceed T ake note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Use a grounded wrist strap or touch a safely grounded object or a metal object, such as the[...]

ASUS P5SD2-FM 1-3 P5SD2-FM ® 1.2 Motherboard overview Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Refer to the chassis documentation before installing the motherboard. Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so can c[...]

1-4 Chapter 1: Hardware information 1.2.3 Motherboard layout P5SD2-FM CR2032 3V Lithium Cell CMOS Power Super I/O 4Mb BIOS A TX12V FLOPPY USB78 USB56 PCI2 SiS 966 DDR2 DIMM1 (64 bit,240-pin module) CPU_F AN PRI_IDE S ATA 4 VIA VT6307 LAN_USB34 ® DDR2 DIMM2 (64 bit,240-pin module) EA TXPWR CHA_F AN PCI1 PCIEX1_1 PCIEX16 S ATA 2 F_USB12 F_P ANEL SPD[...]

ASUS P5SD2-FM 1-5 1.2.4 Layout Contents Slots Page 1. DDR DIMM slots 1-14 2. PCI slots 1-20 3. PCI Express slot 1-20 Jumpers Page 1. Clear R TC RAM (CLRTC) 1-21 2. USB device wake-up (3-pin USBPW12, USBPW34, USBPW56, USBPW78) 1-22 Rear panel connectors Page 1. Serial port 1-23 2. IEEE 1394a port 1-23 3. LAN (RJ-45) port 1-23 4. Center/Subwoofer por[...]

1-6 Chapter 1: Hardware information Internal connectors Page 1. Floppy disk drive connector (34-1 pin FLOPPY) 1-25 2. Power LED connector (3-1 pin PLED) 1-25 3. IDE connectors (40-1 pin PRI_IDE, SEC_IDE) 1-26 4. Serial A T A connectors (7-pin SA T A1 [black], SA T A2 [black]) 1-27 5. CPU and Chassis fan connectors (4-pin CPU_F AN, 3-pin CHA_F AN) 1[...]

ASUS P5SD2-FM 1-7 1.3.1 Installing the CPU T o install a CPU: 1. Locate the CPU socket on the motherboard. 1.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA775 socket designed for the Intel ® Pentium ® 4 processor in the 775-land package. Before installing the CPU, make sure that the socket box is facing towards you[...]

1-8 Chapter 1: Hardware information T o prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU. 2. Press the load lever with your thumb (A), then move it to the left (B) until it is released from the retention tab. Retention tab Load lever This side of the socket box should face you. PnP cap A B 3. Lift the loa[...]

ASUS P5SD2-FM 1-9 Notes on Intel ® Hyper-Threading T echnology • This motherboard supports Intel ® Pentium ® 4 CPUs in the 775-land package with Hyper-Threading T echnology . • Hyper-Threading T echnology is supported under Windows ® XP and Linux 2.4.x (kernel) and later versions only . Under Linux, use the Hyper-Threading compiler to compi[...]

1-10 Chapter 1: Hardware information 1.3.2 Installing the CPU heatsink and fan The Intel ® Pentium ® 4 LGA775 processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. Fastener Motherboard hole • When you buy a boxed Intel ® Pentium ® 4 processor , the p ackage includes the CPU fan [...]

ASUS P5SD2-FM 1-11 3. Connect the CPU fan cable to the connector on the motherboard labeled CPU_F AN. Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector . 2. Push down two fasteners at a time in a diagonal sequence to secure the heatsink and fan assembly in place. A A B B B B A A [...]

1-12 Chapter 1: Hardware information 1. 3 .3 Uninstalling the CPU heatsink and fan T o uninstall the CPU heatsink and fan: 1. Disconnect the CPU fan cable from the connector on the motherboard. 2. Rotate each fastener counterclockwise. 3. Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and fan assembly from the moth[...]

ASUS P5SD2-FM 1-13 4. Remove the heatsink and fan assembly from the motherboard. 5. Rotate each fastener clockwise to reset the orientation. The narrow end of the groove should point outward after resetting. (The photo shows the groove shaded for emphasis.) Narrow end of the groove[...]

1-14 Chapter 1: Hardware information 1.4.2 Memory Configurations Y ou may install 256 MB, 512 MB and 1 GB unbuffered non-ECC DDR DIMMs into the DIMM sockets using the memory configurations in this section. • Always inst all DIMMs with the same CAS latency . For optimum comp atibility , we recommend that you obtain memory modules from the same ven[...]

ASUS P5SD2-FM 1-15 1.4.3 Installing a DIMM Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components. T o install a DIMM: 1. Unlock a DIMM socket by pressing the retaining clips outward. 2. Align a DIMM on the socket such that the notch on [...]

1-16 Chapter 1: Hardware information 1.5 Expansion slots In the future, you may need to install exp ansion cards. The following sub-sections describe the slots and the expansion cards that they support. 1.5.1 Installing an expansion card T o install an expansion card: 1. Before installing the expansion card, read the documentation that came with it[...]

ASUS P5SD2-FM 1-17 Standard interrupt assignments IRQ Priority Standard Function 0 1 System T imer 1 2 Keyboard Controller 2 - Re-direct to IRQ#9 3 1 1 Communications Port (COM2)* 4 12 Communications Port (COM1)* 5 13 IRQ holder for PCI steering* 6 14 Floppy Disk Controller 7 15 Printer Port (LPT)* 8 3 System CMOS/Real T ime Clock 9 4 IRQ holder fo[...]

1-18 Chapter 1: Hardware information 1.5. 5 PCI slots This motherboard has three PCI slots. The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specifications. The figure shows a LAN card installed on a PCI slot. 1.5. 6 PCI Express x16 slot This motherboard supports PCI Express x16 graphic cards[...]

ASUS P5SD2-FM 1-21 1.6 Jumpers 1. Clear RTC RAM (CLRTC) This jumper allows you to clear the Real T ime Clock (RTC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS R TC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as syste[...]

1-22 Chapter 1: Hardware information 2. BIOS Recovery (3-pin RECOVER Y1) This jumper allows you to recover your original BIOS from a floppy disk in case the BIOS and data are corrupted. T o recover the BIOS: 1. T urn OFF the computer and unplug the power cord. 2. Move the jumper cap from pins 1-2 (default) to pins 2-3. 3. Inset a power cord and tur[...]

ASUS P5SD2-FM 1-23 3. Password Skip P5SD2-FM r ® P5SD2-FM Clear Password Setting PWDSKP Normal Clear Password (Default) 23 12 • The USB device wake-up feature requires a power supply that can provide 500 mA on the +5VSB lead for each USB port; otherwise, the system would not power up. • The total current consumed must NOT exceed the power supp[...]

1-24 Chapter 1: Hardware information 1.7 Connectors 1.7.1 Rear panel connectors 1. Serial port. This 9-pin COM1 port is for pointing devices or other serial devices. 2. IEEE 1394a port. This 6-pin IEEE 1394a port provides high-speed connectivity for audio/video devices, storage peripherals, PCs, or portable devices. 3. LAN (RJ-45) port. This port a[...]

ASUS P5SD2-FM 1-25 9. Rear Speaker Out port (gray). This port connects the rear speakers on a 4, 6, or 8-channel audio configuration. 9. USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. 1 1. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are available for [...]

1-26 Chapter 1: Hardware information 1.7.2 Internal connectors 1. Floppy disk drive connector (34-1 pin FLOPPY) This connector is for the provided floppy disk drive (FDD) signal cable. Insert one end of the cable to this connector , then connect the other end to the signal connector at the back of the floppy disk drive. Pin 5 on the connector is re[...]

ASUS P5SD2-FM 1-27 3. IDE connectors (40-1 pin PRI_IDE, SEC_IDE) These connector s are for a Ultra DMA 100/66 signal cable. The Ultra DMA 100/ 66 signal cable has three connectors: a blue connector for the primary IDE connector on the motherboard, a black connector for an Ultra DMA 100/66 IDE slave device (optical drive/hard disk drive), and a gray[...]

1-28 Chapter 1: Hardware information Connector Color Setting Use SA T A1 , SA T A2 Blue Master Boot Disk SA T A3, SA T A4 Black Slave Data Disk Serial A T A Master/Slave connectors 4. Serial A T A connectors (7-pin SA T A1 [blue], SA T A2 [blue], SA T A3 [black], SA T A4 [black]) These connectors are for the Serial A T A signal cables for Serial A [...]

ASUS P5SD2-FM 1-29 5. CPU and Chassis fan connectors (4-pin CPU_F AN, 3-pin CHA_F AN) The fan connectors support cooling fans of 350 mA ~ 2 000 mA (24 W max.) or a total of 1 A ~ 3.48 A (41.76 W max.) at +12 V . Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of t[...]

1-30 Chapter 1: Hardware information Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! 7. USB connectors (10-1 pin USB56, USB78) These connectors are for USB 2.0 ports. Connect the USB/GAME module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. Thes[...]

ASUS P5SD2-FM 1-31 9. A TX power connectors (24-pin E A TXPWR, 4-pin A TX12V) These connectors are for an A TX power supply . The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. • We recommend that you use an A TX 12 V S[...]

1-32 Chapter 1: Hardware information 1 1. Front panel audio connector (10-1 pin FP_AUDIO) This connector is for a chassis-mounted front panel audio I/O module that supports AC ‘97 audio standard. Connect one end of the front panel audio I/ O module cable to this connector . 10. Internal audio connector (4-pin AUX) This connector allows you to rec[...]

ASUS P5SD2-FM 1-33 12. System p anel connector (10-1 pin F_P ANEL) This connector supports several chassis-mounted functions. • System power LED (Green 2-pin PLED) This 3-pin connector is for the system power LED. Connect the chassis power LED cable to this connector . The system power LED light s up when you turn on the system power , and blinks[...]

1-34 Chapter 1: Hardware information[...]

2 BIOS setup This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.[...]

2-2 Chapter 2: BIOS setup 2.2 BIOS setup program This motherboard supports a programmable firmware chip that you can update using the provided utility described in section “ 2.1 Managing and updating your BIOS.” Use the BIOS Setup program when you are installing a motherboard, reconfiguring your system, or prompted to “Run Setup.” This sect[...]

ASUS P5SD2-FM 2-3 2.2.2 Menu bar The menu bar on top of the screen has the following main items: Main For changing the basic system configuration Advanced For changing the advanced system settings Power For changing the advanced power management (APM) configuration Boot For changing the system boot configuration Exit For selecting the exit options [...]

2-4 Chapter 2: BIOS setup 2.2.4 Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power , Boot, and Exit) on the menu bar have their respective menu items. 2.2.5 Sub-menu items A solid triangle before each item on any menu scre[...]

ASUS P5SD2-FM 2-5 2. 3 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. 2.3.1 System Time [xx:xx:xx] Allows you to set the system time. 2.3.2 System Date [Day xx/xx/xxxx] Allows you to set the system date. 2.3.3 Legacy Diskette A [Disabled] Sets the type of floppy[...]

2-6 Chapter 2: BIOS setup 2.3.4 Primary , Secondary , Third, and Fourth IDE Master/Slave While entering Setup, the BIOS automatically detects the presence of IDE devices. There is a separate sub-menu for each IDE device. Select a device item then press <Enter> to display the IDE device information. The BIOS automatically detects the values op[...]

ASUS P5SD2-FM 2-7 PIO Mode [Auto] Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4] DMA Mode [Auto] Automatically sets the DMA mode. SMART Monitoring [Auto] Sets the Self-Monitoring, Analysis, and Reporting T echnology . Configuration options: [Auto] [Disabled] [Enabled] 32Bit Dat a T ransfer [Enabled] Enables or disables 32-b[...]

2-8 Chapter 2: BIOS setup 2.3.6 System Information This menu gives you an overview of the general system specifications. The BIOS automatically detects the items in this menu. AMI BIOS Displays the auto-detected BIOS information. Processor Displays the auto-detected CPU specification. System Memory Displays the auto-detected system memory . AMIBIOS[...]

ASUS P5SD2-FM 2-9 2. 4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. T ake caution when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. Configure CPU. CPU Configuration Chipset Onboard Devices Configuration PCI PnP USB Config[...]

2-10 Chapter 2: BIOS setup Y ou can only adjust the Ratio CMOS setting if you inst alled an unlocked CPU. Refer to the CPU documentation for details. 2.4.1 CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. Configure advanced CPU Settings Manufacturer : Intel Brand String : Genuined Intel [...]

ASUS P5SD2-FM 2-11 2.4.2 Chipset The Chipset menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the sub-menu. NorthBridge SIS649 Configuration SouthBridge SiS965/SiS965L Configuration Options for NB CPU Internal Thermal Control [Auto] Disables or sets the CPU internal thermal control. Configu[...]

2-12 Chapter 2: BIOS setup Primary Graphics Adapter [PCI Express] CPU FSB Set To Chipset Timing [FSB: 800MHz] Auto Detect DRAM Frequency [Enabled] CPU:DRAM Frequency Ratio [3:2] Real CPU FSB:DRAM = 800(200*4): 533(266*2) MHz DRAM CAS# Latency [By SPD] Dual Core PATCH [Enabled] NorthBridge SIS649 Chipset Configuration Primary Graphics Adapter [PCI E[...]

ASUS P5SD2-FM 2-13 Onboard Audio Device [Enabled] Onboard SiS191 LAN Device [Enabled] MAC/PHY Interface Mode [MII/GMII Mode] Onboard LAN Boot ROM [Disabled] SouthBridge SiS966 Chipset Configuration Onboard Audio Device [Enabled] Enables or disables the onboard audio CODEC. Configuration options: [Disabled] [Enabled] Onboard SiS966 LAN Device [Enabl[...]

2-14 Chapter 2: BIOS setup 2.4.3 Onboard Devices Configuration Configure ITE8712 Super IO Chipset Serial Port1 Address [3F8/IRQ4] Serial Port1 Mode [Normal] Onboard 1394 Controller [Enabled] Allows BIOS to enable or disable the floppy controller. Serial Port1 Address [3F8/IRQ4] Allows you to select the Serial Port1 base address. Configuration optio[...]

ASUS P5SD2-FM 2-15 2.4.4 PCI PnP The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices. The menu includes setting IRQ and DMA channel resources for either PCI/ PnP or legacy ISA devices, and setting the memory size block for legacy ISA devices. T ake caution when changing the settings of the PCI PnP menu items. Incorr[...]

2-16 Chapter 2: BIOS setup Allocate IRQ to PCI VGA [Y es] When set to [Y es], BIOS assigns an IRQ to PCI VGA card if the card requests for an IRQ. When set to [No], BIOS does not assign an IRQ to the PCI VGA card even if requested. Configuration options: [Y es] [No] OffBoard PCI/ISA IDE Card [Auto] Allows you to set the PCI slot number that is hold[...]

ASUS P5SD2-FM 2-17 The Module V ersion and USB Devices Enabled items show the auto-detected values. If no USB device is detected, the item shows None . 2.4.5 USB Configuration The items in this menu allow you to change the USB-related features. Select an item then press <Enter> to display the configuration options. USB Configuration Module Ve[...]

2-18 Chapter 2: BIOS setup 2. 5 Power menu The Power menu items allow you to change the settings for the ACPI and Advanced Power Management (APM). Select an item then press <Enter> to display the configuration options. 2.5.1 ACPI A ware O/S [Y e s] Set this item to [Y es] if the operating system supports the Advanced Configuration and Power I[...]

ASUS P5SD2-FM 2-19 The computer cannot receive or transmit data until the computer and applications are fully running. Thus, connection cannot be made on the first try . T urning an external modem off and then back on while the computer is of f causes an initialization string that turns the system on. 2.5.6 APM Configuration Power Button Mode [On/O[...]

2-20 Chapter 2: BIOS setup Power On By RTC Alarm [Disabled] Allows you to enable or disable RTC to generate a wake event. When this item is set to Enabled, the items RTC Alarm Date, R TC Alarm Hour , R TC Alarm Minute, and RTC Alarm Second appear with set values. Configuration options: [Disabled] [Enabled] 2.5.7 Hardware Monitor Hardware Monitor CP[...]

ASUS P5SD2-FM 2-21 2.6.1 Boot Device Priority Boot Device Priority 1st Boot Device [1st Floppy Drive] 2nd Boot Device [PM-ST320410A] 3nd Boot Device [PS-ASUS CD-S520/A] 1st ~ xxth Boot Device [xxx Drive] These items specify the boot device priority sequence from the available devices. The number of device items that appears on the screen depends on[...]

2-22 Chapter 2: BIOS setup Bootup Num-Lock [On] Allows you to select the power-on state for the NumLock. Configuration options: [Off] [On] W ait for ‘ F1’If Error [Disabled] When set to Enabled, the system waits for the F1 key to be pressed when error occurs. Configuration options: [Disabled] [Enabled] Hit ‘DEL’Message Display [Enabled] Whe[...]

ASUS P5SD2-FM 2-23 2.6.3 Security The Security menu items allow you to change the system security settings. Select an item then press <Enter> to display the configuration options. Security Settings Supervisor Password : Not Installed User Password : Not Installed Change Supervisor Password Change User Password <Enter> to change password[...]

2-24 Chapter 2: BIOS setup After you have set a supervisor password, the other items appear to allow you to change other security settings. User Access Level (Full Access] This item allows you to select the access restriction to the Setup items. Configuration options: [No Access] [View Only] [Limited] [Full Access] No Access prevents user access to[...]

ASUS P5SD2-FM 2-25 The message “Password Installed” appears after you set your password successfully . T o change the user password, follow the same steps as in setting a user password. Clear User Password Select this item to clear the user password. Password Check [Setup] When set to [Setup], BIOS checks for user password when accessing the Se[...]

2-26 Chapter 2: BIOS setup Exit & Discard Changes Select this option only if you do not want to save the changes that you made to the Setup program. If you made changes to fields other than System Date, System T ime, and Password, the BIOS asks for a confirmation before exiting. Discard Changes This option allows you to discard the selections y[...]