Asus pmn manual

Pundit P1-PH1 User Guide Barebone System[...]

ii Copyright © 2006 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without [...]

iii T able of contents Notices ........................................................................................... vi Safety information ......................................................................... vii About this guide ............................................................................ viii System package contents ....[...]

iv T able of contents 2.9 Installing optical and storage drives ................................. 2-16 2.9.1 Optical and storage drives installation ............... 2-16 2.9.2 Recommended optical drive dimension ............. 2-18 2.10 Replacing the cover .......................................................... 2-20 2.1 1 Removing and reinstallin[...]

v T able of contents Chapter 5: BIOS setup 5.1 Managing and updating your BIOS .................................... 5-2 5.1.1 ASUS EZ Flash utility ........................................... 5-2 5.1.2 Recovering the BIOS with CrashFree BIOS 2 ..... 5-3 5.1.3 ASUS Update ....................................................... 5-5 5.2 BIOS Setup pro[...]

vi Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has b[...]

vii Safety infor mation Electrical safety • T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. • If the power supply i[...]

viii Safeguards About this guide Audience This guide provides general information and installation instructions about the ASUS Book size barebone system. This guide is intended for experienced users and integrators with hardware knowledge of personal computers. How this guide is organized This guide contains the following parts: 1. Chapter 1: Syste[...]

ix Conventions used in this guide W ARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORT ANT : Information that you MUST follow to complete a task. NOTE: T ips and additional information to aid in completing a task. Where to [...]

x System package contents Check your book size barebone system package for the following items. 1. ASUS book size barebone system with: • ASUS motherboard • CPU fan and heatsink assembly • CompactFlash card reader • 3-in-1 storage card reader • PCI riser card • 250W power supply unit 2. Cables • Power cable and plug • Serial A T A p[...]

Chapter 1 System introduction This chapter gives a general description of the ASUS book size barebone system. The chapter lists the system features including introduction on the front and rear panel, and internal components.[...]

1-2 Chapter 1: System introduction 1 . 1 Welcome! Thank you for choosing the ASUS book size barebone system! The ASUS book size barebone system is a union of power , design, and performance built on ASUS technology and innovation. Inside the elegant casing is the ASUS motherboard that supports Intel ® Pentium ® 4 processor with up to 800MHz front[...]

1-3 ASUS Pundit P1-PH1 system 1 .3 Fr ont panel (internal) The optical drive, storage card reader , and several I/O ports are located inside the front panel door . Open the front panel door by pressing the mark. 8. Reset button . Press this button to reset the system. 9. CF card slot . This slot is for a CompactFlash ® compliant card. 10. 3-in-1 c[...]

1-4 Chapter 1: System introduction 1 .4 Rear panel The system rear panel includes the power socket and several I/O ports that allow convenient connection of devices. 1. V oltage selector . This switch allows you to select the appropriate voltage supply in your area. See the “V oltage selector” section on page 2-23 before adjusting this switch. [...]

1-5 ASUS Pundit P1-PH1 system 13. PS/2 keyboard port . This purple 6-pin connector is for a PS/2 keyboard. 14. Microphone port . This Microphone (pink) port connects a microphone. In 4/ 6-channel mode, the function of this port becomes Surround Speaker . 15. Line Out port . This Line Out (lime) port connects a headphone or a speaker . In 4/6-channe[...]

1-6 Chapter 1: System introduction 1 .6 System dimension The ASUS booksize barebone system is ergonomically designed to fit and complement your desktop. Y ou may use the foot stand to place the system vertically on a flat, stable surface. 275mm 91mm 357mm 1 .5 Internal components The illustration below is the internal view of the system when you re[...]

Chapter 2 Basic installation This chapter provides step-by-step instructions on how to install components in the system.[...]

2-2 Chapter 2: Basic installation 2. 1 Prepar ation Before you proceed, make sure that you have all the components that you plan to install in the system. Basic components to install 1. Central processing unit (CPU) 2. DDR II Memory Module 3. Expansion card(s) 4. Hard disk drive 5. Optical drive T ool Phillips (cross) screw driver 2.2 Before you pr[...]

2-3 ASUS Pundit P1-PH1 system 3. Pull the cover slightly toward the rear panel until the cover tabs disengage from the chassis. 2. Use a Phillips (cross) screw driver to remove the cover screws. Keep the screws for later use. 2.3 Removing the cover T o remove the cover: 3 2 1 1 1. On the rear panel, locate the two screws that secure the cover to th[...]

2-4 Chapter 2: Basic installation 1. Locate and remove three storage drive assembly screws. Keep the screws for later use. 2. Slightly lift the storage drive assembly until its hooks are released from the chassis holes. Set the storage drive assembly aside. When removing the storage drive assembly , make sure to hold or support it firmly . The asse[...]

2-5 ASUS Pundit P1-PH1 system 2.6 Installing a CPU The motherboard comes with a surface mount LGA775 socket designed for Intel ® Pentium ® 4 processor in the 775-land package. 2.6.1 Removing the CPU fan and heatsink assembly The system package includes a pre-installed proprietary CPU fan and heatsink assembly to provide an efficient thermal solut[...]

2-6 Chapter 2: Basic installation 2.6.2 CPU installation T o install the CPU: 1. Locate the 775-pin CPU socket on the motherboard. Before installing the CPU, make sure that the socket box is facing towards you and the load lever is on your left. To prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU. 2. Pres[...]

2-7 ASUS Pundit P1-PH1 system 3. Lift the load lever in the direction of the arrow to a 135º angle. 4. Lift the load plate with your thumb and forefinger to a 100º angle (A), then push the PnP cap from the load plate window to remove (B). 5. Position the CPU over the socket, making sure that the gold triangle is on the bottom-left corner of the s[...]

2-8 Chapter 2: Basic installation 2.6.3 Reinstalling the CPU fan and heatsink assembly T o reinstall the CPU fan and heatsink assembly: 1. Position the CPU fan and heatsink assembly on top of the installed CPU. 3. Connect the CPU fan cable to the CPU fan connector on the motherboard. 2. Hold down the heatsink lightly and twist each of the four scre[...]

2-9 ASUS Pundit P1-PH1 system 2.7 Inst alling memor y modules 2.7.1 Overview The system motherboard has two DDR II DIMM sockets that support up to 2GB non-ECC PC5300/4200/3200 DDR II SDRAM DIMMs. Each DIMM socket is double-sided. Refer to the illustration below for the location of the DIMM sockets. For optimum compatibility , we recommend that you [...]

2-10 Chapter 2: Basic installation 2.7.3 Qualified V endor List The following table lists the DDR II 667 memory modules that have been tested and qualified for use with this motherboard. DIMM support Size V endor Model CL Brand SS/DS Component A* B* 256MB SAMSUNG M378T3253FZ0-CE6 – SAMSUNG SS K4T56083QF-ZCE6 V V 512MB SAMSUNG M378T6453FZ0-CE6 –[...]

2-11 ASUS Pundit P1-PH1 system 4. Firmly insert the DIMM into the socket until the retaining clips snap back in place and the DIMM is properly seated. Locked retaining clip A DDR II DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into a socket to avoid damaging the DIMM. T o install a DIMM: 1. Locate the DIMM s[...]

2-12 Chapter 2: Basic installation 2.7.5 Removing a DIMM T o remove a DIMM: 1. Simultaneously press the retaining clips outward to unlock the DIMM. 2. Remove the DIMM from the socket. Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out with extra force. Remove the CPU fan and he[...]

2-13 ASUS Pundit P1-PH1 system 2.8 Installing PCI cards In the future, you may need to install PCI cards to the system. The system motherboard has one PCI slot with a preinstalled PCI riser assembly that supports two PCI cards. Make sure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical inju[...]

2-14 Chapter 2: Basic installation 2. Place the PCI riser asembly on a flat surface. 3. Remove the bracket opposite the PCI slot you wish to use. Keep the screw for later use. 4. Align the PCI card connector with the slot and press firmly until the card is completely seated on the slot. Secure the PCI card to the PCI riser assembly with the screw y[...]

2-15 ASUS Pundit P1-PH1 system 2.8.3 Configuring an expansion card After installing the expansion card, configure the card by adjusting the software settings. 1. T urn on the system and change the necessary BIOS settings, if any . See Chapter 5 for information on BIOS setup. 2. Assign an IRQ to the card. Refer to the tables below . 3. Install the s[...]

2-16 Chapter 2: Basic installation 2.9 Installing optical and stor age drives 2.9.1 Optical and storage drives installation The system supports one UltraA T A 100/66 IDE or one Serial A T A hard disk drive. Configure your hard disk drive as Master device before installing it in the storage drive assembly . Refer to the HDD documentation on how to s[...]

2-17 ASUS Pundit P1-PH1 system T o install a Serial A T A hard disk drive: 1. Follow steps 1-3 of the previous section. 2. Connect one end of the supplied 7-pin SA T A cable to the connector at the back of the drive, then connect the other end to the SA T A connector on the motherboard. See page 4-7 for the location of the Serial A T A connector . [...]

2-18 Chapter 2: Basic installation 2.9.2 Recommended optical drive dimension Y ou must consider the following optical drive requirements when installing a new optical drive or replacing a defective one. We recommend that you install and use an ASUS optical drive on this system. Optical drive buttons The stop/eject button area of the DVD/CD-ROM driv[...]

2-19 ASUS Pundit P1-PH1 system Optical drive cover thickness and length The thickness of the optical drive front panel cover should be less than or equal to 7 millimeters and the length of the drive should be less than or equal to 208 millimeters. ↓ ≤ 7mm ↓ ↓ ≤ 208mm[...]

2-20 Chapter 2: Basic installation 2. 10 Replacing the cover After installing all system components and reconnecting all cables, replace the system cover by following these instructions. 2. Position the cover at least two inches from the front panel, then align the cover hooks to the chassis rail. 1. Replace the front panel cover by fastening its h[...]

2-21 ASUS Pundit P1-PH1 system 2. 1 1 Removing and reinstalling t he foot stand The system comes with a removable foot stand for vertical desktop placement. Follow the instructions to remove or reinstall the foot stand. 2. Align the foot stand hooks to the chassis holes, then lay the foot stand over the chassis bottom. 3. Pull the foot stand toward[...]

2-22 Chapter 2: Basic installation 3. Use your thumb to push the lock toward the rear panel until the foot stand tabs are released from the chassis holes. 4. Lift the foot stand, then set it aside. Lock 2 1 3 2.1 1.2 Removing the foot stand T o remove the foot stand: 1. Lay the system upside down on a flat and stable surface. 2. Locate the foot sta[...]

2-23 ASUS Pundit P1-PH1 system 2. 1 2 Power suppl y unit information The system comes with a 250W power supply unit (PSU). 2.12.1 V oltage selector The PSU has a 1 15V/230V voltage selector switch located beside the power socket. Use this switch to select the appropriate voltage according to the voltage supply in your area. Setting the switch to 1 [...]

2-24 Chapter 2: Basic installation 2.12.2 Power supply specifications Input Characteristics Input V oltage Range Min Nom Max Range 1 90V 100-127V 132V Range 2 180V 200-240V 264V Input Frequency Range 47 Hz to 63 Hz Maximum Input ac Current 7A max. at 1 15V ac 4A max. at 230V ac, full load Efficiency 65% min. at input 1 15V ac/230V ac and output ful[...]

2-25 ASUS Pundit P1-PH1 system 2. 1 3 Connecting devices T o the rear panel Parallel Serial PS/2 KB VGA Line Out Line In Mic RJ-45 PS/2 Mouse USB AC DVI-D TV -out S-Video[...]

2-26 Chapter 2: Basic installation T o the front panel Scanner Camera Headphone Mic Audio Devices HDD[...]

Chapter 3 Starting up This chapter helps you to power up and use the system for the first time. This part also provides information on how to install drivers and utilities from the support CD.[...]

3-2 Chapter 3: Starting up 3. 1 Inst alling an operating system The ASUS book size barebone system supports Windows ® 2000 / XP operating systems (OS). Always install the latest OS version and corresponding updates so you can maximize the features of your book size barebone system. 3.2 Powering up The system power button is located on the front pa[...]

3-3 ASUS Pundit P1-PH1 system 3.3.3 Optical drive If your system comes with an installed optical drive, follow these instructions to insert a CD/DVD to the drive. 1. Press the EJECT button of the optical drive. 2. Place a CD/DVD on the drive tray . Make sure the CD/DVD is properly seated on the tray locks. 3. Push the drive tray back to the drive. [...]

3-4 Chapter 3: Starting up 3.4.1 Running the support CD T o begin using the support CD, place the CD in your optical drive. The CD automatically displays the Drivers menu if Autorun is enabled in your computer . Click an item to install Click an icon to display other information If Autorun is NOT enabled in your computer , browse the contents of th[...]

3-5 ASUS Pundit P1-PH1 system Realtek Audio Driver Click this item to install the Realtek Audio Driver . Realtek LAN Driver Click this item to install the Realtek LAN Driver . USB 2.0 Driver Click this item to install the USB 2.0 Driver . 3.4.3 Utilities The Utilities tab displays the applications and softwares that the motherboard supports. ASUS P[...]

3-6 Chapter 3: Starting up 3.4.4 ASUS contact information Click the Contact tab to display the ASUS contact information. ASUS Screensaver This item installs the ASUS Screensaver . ADOBE Acrobat Reader V7.0 This item installs the Adobe ® Acrobat Reader ® . The Acrobat ® Acrobat Reader ® software is for viewing files saved in Portable Document Fo[...]

3-7 ASUS Pundit P1-PH1 system 3.4.5 Other information The icons on the top right side of the screen give additional information on the motherboard and the contents of the support CD. Click an icon to display the specified information. Motherboard info Motherboard info Motherboard info Motherboard info Motherboard info Displays the general specifica[...]

3-8 Chapter 3: Starting up Technical support form Technical support form Technical support form Technical support form Technical support form Displays the ASUS Technical Support Request Form that you have to fill out when requesting technical support. Filelist Filelist Filelist Filelist Filelist Displays the contents of the support CD and a brief d[...]

Chapter 4 Motherboard info This chapter gives information about the motherboard that comes with the system. This chapter includes the motherboard layout, jumper settings, and connector locations.[...]

4-2 Chapter 4: Motherboard info 4. 1 Intr oduction The ASUS motherboard comes already installed in the ASUS book size barebone system. This chapter provides technical information about the motherboard for future upgrades or system reconfiguration. 4.2 Motherboard layout CD USB34 IT8712 PMC Flash A TX12V BUZZER COM1 TVOUT CPU_FAN SPDIF_IN RSTCON CH7[...]

4-3 ASUS Pundit P1-PH1 system 4.3 Jumper 1. Clear RTC RAM (CLRTC) This jumper allows you to clear the Real T ime Clock (R TC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The RAM data in CMOS, that include system setup information such as system passwords, is powered by the[...]

4-4 Chapter 4: Motherboard info 4.4 Internal connectors This section describes and illustrates the connectors on the motherboard. See section “1.4 Rear panel” for the description of the rear panel connectors. 1. USB connector (10-1 pin USB34) If the rear panel USB 2.0 ports are inadequate, a USB header is available at midboard to accommodate tw[...]

4-5 ASUS Pundit P1-PH1 system 3. LED connector (6-pin LED_CON) This connector supports the Power and HDD activity LEDs in the system front panel. 4. A TX power connectors (24-pin EA TXPWR, 4-pin A TX12V) These connectors are for the 24-pin and 4-pin power plugs from the power supply unit. The plugs from the power supply unit are designed to fit the[...]

4-6 Chapter 4: Motherboard info 5. IDE connector (40-1 pin PRI_IDE) This connector is for an Ultra DMA 133/100/66 signal cable. The Ultra DMA 133/100/66 signal cable has three connectors: a blue connector for the primary IDE connector on the motherboard, a black connector for an Ultra DMA 133/100/66 IDE slave device (optical drive/hard disk drive),[...]

4-7 ASUS Pundit P1-PH1 system 6. Serial A T A connector (7-pin SA T A1) This next generation connector supports the thin Serial A T A cable for a Serial A T A hard disk drive. The current Serial A T A interface allows up to 150 MB/s data transfer rate, faster than the standard parallel A T A with 133 MB/s (Ultra A T A 133). Important notes on Seria[...]

4-8 Chapter 4: Motherboard info 9. CPU fan connector (3-pin CPU_F AN) The fan connectors support the proprietary CPU fan. Connect the fan cable to the connector matching the black wire to the ground pin. Do not forget to connect the fan cables to the fan connectors. Lack of sufficient air flow within the system may damage the motherboard components[...]

1 Chapter 5 BIOS setup This chapter tells how to change system settings through the BIOS Setup menus and describes the BIOS parameters.[...]

5-2 Chapter 5: BIOS setup 5. 1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. 1. ASUS EZ Flash (Updates the BIOS using a flash disk during POST .) 2. CrashFree BIOS 2 (Updates the BIOS using the support CD when the BIOS gets corrupted.) 3. ASUS Update (U[...]

5-3 ASUS Pundit P1-PH1 system 5.1.2 Recovering the BIOS with CrashFree BIOS 2 The CrashFree BIOS 2 auto recovery tool allows you to restore BIOS from the motherboard support CD, or from a USB floppy disk or flash disk that contains the BIOS file, in case the current BIOS on the motherboard fails or gets corrupted. • Prepare the support CD that ca[...]

5-4 Chapter 5: BIOS setup Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... 3. Place the support CD in the optical drive. The support CD contains the original BIOS for this motherboard. 4. When the BIOS update process is complete, reboot the system. DO NOT shut down or reset the system while updating the BIOS! Doing so may cause s[...]

5-5 ASUS Pundit P1-PH1 system 5.1.3 ASUS Update The ASUS Update is a utility that allows you to update the motherboard BIOS in Windows ® environment. This utility is available in the support CD that comes with the motherboard package. ASUS Update requires an Internet connection either through a network or an Internet Service Provider (ISP). T o in[...]

5-6 Chapter 5: BIOS setup 4. From the FTP site, select the BIOS version that you wish to download. Click Next . 5. Follow the instructions on the succeeding screens to complete the update process. If you selected the option to update the BIOS from a file, a window pops up prompting you to locate the file. Select the file, click Save , then follow t[...]

5-7 ASUS Pundit P1-PH1 system 5.2 BIOS Setup program This motherboard supports a programmable Firmware Hub (FWH) that you can update using the provided utility described in section “ 5.1 Managing and updating your BIOS.” Use the BIOS Setup program when you are installing a motherboard, reconfiguring your system, or prompted to “Run Setup.” [...]

5-8 Chapter 5: BIOS setup 5.2.1 BIOS menu bar The top of the screen has a menu bar with the following selections: MAIN MAIN MAIN MAIN MAIN Use this menu to make changes to the basic system configuration. ADVANCED ADVANCED ADVANCED ADVANCED ADVANCED Use this menu to enable and make changes to the advanced features. POWER POWER POWER POWER POWER Use [...]

5-9 ASUS Pundit P1-PH1 system General help In addition to the Item Specific Help window , the BIOS setup program also provides a General Help screen. Y ou may launch this screen from any menu by simply pressing <F1>. The General Help screen lists the legend keys and their corresponding functions. Saving changes and exiting the Setup program S[...]

5-10 Chapter 5: BIOS setup 5.3.1 System T ime [xx:xx:xx] Sets the system to the time that you specify (usually the current time). The format is hour , minute, second. V alid values for hour , minute and second are Hour: (00 to 23), Minute: (00 to 59), Second: (00 to 59). Use the <T ab> key to move between the hour , minute, and second fields.[...]

5-11 ASUS Pundit P1-PH1 system 5.3.3 Primary IDE Master/Slave; First SA T A Master Primary IDE Master [Auto] Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection is successful, Setup automatically fills in the correct values for the remaining fields on this sub-menu. If automatic detection fails, this may be because [...]

5-12 Chapter 5: BIOS setup UDMA Mode [Auto] Ultra DMA capability allows improved transfer speeds and data integrity for compatible IDE devices. Set to [Disabled] to suppress Ultra DMA capability . Configuration options: [Disabled] [Auto] 5.3.4 HDD SMART Monitoring [Disabled] This option allows you to enable or disable the HDD SMART Monitoring funct[...]

5-13 ASUS Pundit P1-PH1 system 5.4 Advanced Menu CPU Configuration Chipset PCIPnP Onboard Device Configuration USB Configuration Select Menu Item Specific Help Press [Enter] to Set. The Advanced menu items allow you to change the settings for the CPU and other system devices. Take caution when changing the settings of the Advanced menu items. Incor[...]

5-14 Chapter 5: BIOS setup Onboard V ideo Memory Size [64MB] This option allows you to select the size of the onboard graphics controller memory use. Configuration options: [32MB] [64MB] [128MB] [256MB] V ideo Display Device [Auto] This parameter allows you to select the type of video display device you intend to use. Configuration options: [Auto] [...]

5-15 ASUS Pundit P1-PH1 system Memory Hole [Disable] This option allows you to enable or disable the Memory Hole at 15M-16M. Configuration options: [Disabled] [Enabled] System BIOS Cacheable [Disable] This option allows you to enable or disable the System BIOS Cacheable function. Configuration options: [Disabled] [Enabled] Plug & Play O/S [No] [...]

5-16 Chapter 5: BIOS setup 5.4.4 Onboard device configuration The items in this menu show the onboard device configuration settings. Select an item then press <Enter> to display a pop-up menu with the configuration options. Onboard IEEE 1394 [Enabled] Onboard LAN [Enabled] OnChip IDE Device Onboard Device Primary Display Adapter [PCI] Onboard[...]

5-17 ASUS Pundit P1-PH1 system Primary Display Adapter [PCI] Allows you to set the graphics controller to use as the primary boot device. Configuration option: [PCI] Onboard LAN Boot ROM [Disabled] Allows you to enable or disable the option ROM on the onboard LAN chipset. Configuration options: [Disabled] [Enabled] Serial Port1 Address [3F8/IRQ4] A[...]

5-18 Chapter 5: BIOS setup 5.4.5 USB configuration The items in this menu show the USB configuration settings. Select an item then press <Enter> to display a pop-up menu with the configuration options. USB Controller [Enabled] USB EHCI Controller [Enabled] USB Legacy Support [Enabled] Select Menu Item Specific Help USB Configuration USB Contr[...]

5-19 ASUS Pundit P1-PH1 system 5.5 Power menu The Power menu items allow you to change the settings for the Advanced Power Management (APM). Select an item then press Enter to display the configuration options. ACPI Suspend Type [S1&S3] ACPI APIC Support [Enabled] APM Configuration Hardware Monitor Select Menu Item Specific Help ACPI Suspend T [...]

5-20 Chapter 5: BIOS setup 5.5.1 APM configuration This menu shows the Advanced Power Management (APM) configuration settings. Select an item then press <Enter> to display a pop-up menu with the configuration options. Select Menu Item Specific Help Power Up By Ring [Disabled] Power Up By PS/2 Mouse [Disabled] Power Up By PS/2 Keyboard [Disabl[...]

5-21 ASUS Pundit P1-PH1 system V ideo Off Option [Suspend -> Off] This item determines when to activate the video off feature to monitor power management. Configuration options: [Always On] [Suspend -> Off] Power Up On PCI Devices [Disabled] When set to [Enabled], this parameter allows you to turn on the system through a PCI modem. This featu[...]

5-22 Chapter 5: BIOS setup 5.5.2 Hardware Monitor Q-Fan Controller [Enabled] Allows you to enable or disable the ASUS Q-Fan feature that smartly adjusts the CPU or chassis fan speed for more efficient system operation. Configuration options: [Disabled] [Enabled] VCORE V oltage 3.3V V oltage 5V V oltage 12V V oltage The onboard hardware monitor auto[...]

5-23 ASUS Pundit P1-PH1 system 1st Boot Device [Removable] 2nd Boot Device [Hard Disk] 3rd Boot Device [CDROM] 4th Boot Device [Disabled] These items allow you to select your boot device priority . Configuration options: [Removable] [Hard Disk] [CDROM] [Disabled] 5.6 Boot menu The Boot menu items allow you to change the system boot options. Select [...]

5-24 Chapter 5: BIOS setup 5.6.2 Removable drives Removable Drives 1. Ai-Flash Item Specific Help Use <up> or <down> arrow to select a device, then press <+> to move it up, or <-> to move it down the list. Press <ESC> to exit this menu. Select Menu 5.6.3 Hard disk drives Hard Disk Drives 1. 1st Master: HDS7288080PLAT20[...]

5-25 ASUS Pundit P1-PH1 system 5.6.4 CD-ROM drives CDROM Drives 1. 1st Slave: ASUS CD-S360 Item Specific Help Use <up> or <down> arrow to select a device, then press <+> to move it up, or <-> to move it down the list. Press <ESC> to exit this menu. Select Menu[...]

5-26 Chapter 5: BIOS setup 5.6.5 Boot Settings Configuration Quick Boot [Enabled] Enabling this item allows the BIOS to skip some power on self tests (POST) while booting to decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the POST items. Configuration options: [Enabled] [Disabled] Bootup Num-Lock [On] Allows y[...]

5-27 ASUS Pundit P1-PH1 system 5.6.6 Security The Security menu items allow you to change the system security settings. Select an item then press Enter to display the configuration options. Make sure that the Full Screen Logo item is set to [Enabled] if you wish to use the ASUS MyLogo2™ feature. Full Screen Logo [Enabled] This allows you to enabl[...]

5-28 Chapter 5: BIOS setup Supervisor Password [Clear] Supervisor Password [Clear] Supervisor Password [Clear] Supervisor Password [Clear] Supervisor Password [Clear] User Password [Clear] User Password [Clear] User Password [Clear] User Password [Clear] User Password [Clear] These fields allow you to set passwords. T o set a password: 1. Highlight[...]

5-29 ASUS Pundit P1-PH1 system 5.7 Exit menu The Exit menu items allow you to load the BIOS setup default settings, save or discard any changes you made, or exit the Setup utility . Exit & Save Changes Exit & Discard Changes Load Setup Default Discard Changes Item Specific Help This option saves data to CMOS and exits the setup menu. Select[...]

5-30 Chapter 5: BIOS setup Load Setup Defaults This option allows you to load the default values for each of the parameters on the Setup menus. When you select this option or if you press <F5>, a confirmation window appears. Select [YES] to load the default values. Select Exit Saving Changes or make other changes before saving the values to t[...]