ATEN Technology KL1116 manual

LCD KVM Switch K L 111 6 User Manual www.aten.com[...]

KL1116 User Manual ii FCC, CE Information FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT: This equipment has been tested and found t o comply with the limits for a Class A dig ital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is ope[...]

KL1116 User Manual iii User Information Online Registration Be sure to register your product at our online support center: T elephone Suppo rt For telephone support, call this number: User Notice All information, docum entation, and specifications contained in this manual are subject to change without prior no tification by the manufacturer. The ma[...]

KL1116 User Manual iv Package Content s Basic Package The KL1 116 package consists of: 1 KL1116 Hideaway TM LCD KVM Switch wi th Standard Rack Mounting Kit 2 Custom KVM Cable Sets 1 Firmware Upgrade Cable 1P o w e r C o r d 1 User Manual* 1 Quick Start Guide 1 Registration Card Optional Equipment Depending on any optional equipment that you may hav[...]

KL1116 User Manual v Content s FCC, CE Inform ation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii SJ/T 11364-2006. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

KL1116 User Manual vi Hot Plugging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Switching Station Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Hot Plugging Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Powering Off and Rest[...]

KL1116 User Manual vii Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Consignes de sécurité. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Général . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Montage sur[...]

KL1116 User Manual viii About This Manual This User Manual is provided to help you get the most from your KL1116 system. It covers all aspects of installation, configuration and operatio n. An overview of the information found in the manual is provided below. Overview Chapter 1, Introduct ion, introduces you to the KL1116 System. Its purpose, featu[...]

KL1116 User Manual ix Conventions This manual uses the following conv entions: Product Information For informatio n about all ATEN products and how they can hel p you connect without limits, visit ATEN on the Web or contact an A T EN Authorized Reseller. Visit ATEN on th e Web for a list of locations and telephone numbers: Monospaced Indicates text[...]

KL1116 User Manual x This Page Intentionally Left Blank[...]

1 Chapter 1 Introduction Overview The KL1116 KVM Switch is a control unit that allows access to multiple computers from a single KVM (keyboard, monitor, and m ouse), console. Before the develo pment of the Maste r View, the only way to control multiple computer configurations from a singl e console was through a complex and costly network system. N[...]

KL1116 User Manual 2 Access to any computer co nnected to the installation is easily accomplished either by means of a powerful, mouse driven, OSD (On Screen Display) menu system, or by entering Hotkey combinations from the keyboard. A convenient Auto Scan feature also permits automatic scanning and monitori ng of the activities of all computers ru[...]

Chapter 1. Introduction 3 Features  Integrated KVM console wi th 15" or 17" LCD monitor - in a Hideaway ™ housing.  Hideaway ™ housing is slightly less than 1U - with top and bottom clearance for smooth operation in a 1U high system rack.  LCD Monitor component can slide indepe ndently of the keyboard/ touchpad component  [...]

KL1116 User Manual 4 Hardware Requirement s Computers The integrated LCD monitor's maximum resolution is 1024 x 768 (15") or 1280 x 1024 (17"). Make sure that none of the computer resolution set tings exceed the LCD monitor's maximum resolution. Cables Substandard cables may damage the co nnected devices or degrade overall perfo[...]

Chapter 1. Introduction 5 Front V iew (Continues on next page.) No. Component Descript ion 1 Upper Handle Pull to slide the LCD module out; push to slide the module in. See item 7 in this table and Opening the Console , page 15 for more details on sliding the console in and out. 2 LCD Display After sliding the LCD module out, flip up the cover to a[...]

KL1116 User Manual 6 (Continued from previous page.) No. Component Descript ion 4P o r t Switches and Port LEDs Press a switch to bring the KVM focus to the computer attached to its corresponding port. See Manual Port Switching , page 24 for details. T wo Port LEDs are built into the Port Switches. The one on the left is the On Line LED ; the one o[...]

Chapter 1. Introduction 7 Rear View No. Component Descript ion 1 Daisy Chain Port When daisy chaining units, the cable plugs in here. 2 KVM Ports The cables that link to the computers plug in here. Note: The shape of these 15-pin conne ctors has been specifically modified so that only KVM cables designed to work with this switch can plug in (See Ca[...]

KL1116 User Manual 8 This Page Intentionally Left Blank[...]

9 Chapter 2 Hardware Setup S t andard Rack Mounting A standard rack mounting kit is pro vided with your KL1116. The kit enables the switch to be mounted in rack with a depth of 42–77 cm. Note: 1. It takes two people to mount the switch: one to hold it in place; the other to screw it in. 2. The standard rack mounting ki t does not include screws o[...]

KL1116 User Manual 10 Optional mounting kits – in cluding single person Easy Install ation kits – are available with a separate purchase. See Optional Rack Mounting , page 64 for details. To rack mount the K L1116, do the following: 1. While one person position s the KL1116 in the rack and holds it in place, the second person loosely screws the[...]

Chapter 2. Hardware Setup 11 Single St ag e Inst all ation In a Single Stage installa tion, there are no additional switches daisy chained down from the first unit. To set up a single stage installation, refer to the installation diagram on the next page (t he numbers in the diagram correspond to the numbers of the installati on steps), and do the [...]

KL1116 User Manual 12 Single St age Installation Diag ram 1 2 3 4 2[...]

Chapter 2. Hardware Setup 13 Daisy Chain Installation To control even more computers, up to 31 KH0116 units can be daisy chained down from the KL1116. Note: It would be unnecessarily wasteful and expensive to use KL1 1 16 switches for daisy chaining since there is no point in having consoles on the chained switches. Th erefore, KH01 16 switch es ar[...]

KL1116 User Manual 14 (Continued from previous page.) b) Power up each daisy chained station on the installation in turn (Second Station, then Third S tation, etc.). Each KH01 16 has an LED display on its front panel to indicate its Station ID (the Station ID for the First Stage unit (KL1 116) is 01 , the ID for the Second Stage unit (the first KH0[...]

15 Chapter 3 Basic Operation Opening the Console The KL1116's console consists of two modules: An LCD display module located under the top cover, and a keybo ard / touchpad module below the LCD module. The modules can either slide together, or indepen dently. This allows you to have the LCD display available for viewing wh ile the keyboard / t[...]

KL1116 User Manual 16 2. Pull the top panel all the way out until it clicks into place. 3. Rotate t he top panel all the wa y back to expose the LCD screen.[...]

Chapter 3. Basic Operation 17 4. Reach underneath and pul l the keyboard module all the way out until it clicks into place. Opening T ogether Refer to the d iagrams in the Opening Separately section as you do the following: 1. Release the console by sliding the front panel catches toward the center and as you pull the bottom panel a few centimeters[...]

KL1116 User Manual 18 Operating Precautions RIGHT Rest your hands and arms lightly on the keyboard module as you work. WRONG!  DO NOT lean your body weight on the keyboard module.  DO NOT place heavy objects on the keyboard module. The maximum load bearing capacity of the keyboard module is 30kg. Failure to heed the information below can resu[...]

Chapter 3. Basic Operation 19 Closing the Console Closing Sep arately 1. Pull the release cat ches located on either side of the keyboard toward you to release the keyboard module, then slide the modul e slightly in. 2. Let go of the catches. Using the front handle, push the keyboard mo dule all the way in until it clicks into place.[...]

KL1116 User Manual 20 3. Rotate t he LCD module all the way down, then pull and let go of th e rear catches to release the LCD module 4. Using the front handle, push the module all the way in until it click s into place.[...]

Chapter 3. Basic Operation 21 Closing T ogether 1. Rotate the LC D module all the way down, then pull and let go of the rear catches to release the LCD module. (See the diagram on page 20, step 3.) 2. Using the front handle, push th e LCD module all the way in until it clicks into place. (See the diagra m on page 20, step 4.) 3. There are keyboard [...]

KL1116 User Manual 22 LCD OSD Configuration The LCD Buttons The LCD OSD allows you to set up and configure the LCD display. Four buttons are used to perform the co nfigura tion, as described in the table, below: Button Function MENU  When you have not entered the LCD OSD Menu function, pressing this button invokes the Menu function, and br ings [...]

Chapter 3. Basic Operation 23 LCD Adjustment Settings An explanation of the LCD OSD adjustment settings is given in the table below: Setting Explanation Brightness Adjusts the background bl ack level of the screen image. Contrast Adjusts the foreground white level of the screen image. Phase If pixel jitter or horizontal li ne noise is visible on th[...]

KL1116 User Manual 24 Port Selection The KL1116 provides three p ort selec tion methods to access the computers on the installati on: Manual, OS D (On Scr een Display) menus, and Hotkey. OSD Operation is discussed in Chapter 4; Hot key Port Selection is discussed in Chapt er 5. Manual Port Switching  Press a switch to bring the KVM focus to the [...]

Chapter 3. Basic Operation 25 Hot Plugging The KL1116 sup ports hot plugging - components can be removed and added back into the installati on by unplugging their cables from th e ports without the need to shut the unit down. In order for hot plugging to work properly, however, the procedures described below must be followed: Switching St ation Pos[...]

KL1116 User Manual 26 Port ID Numbering Each KVM port on a Master View inst allati on is assigned a unique Port ID. The Port ID is made up of two parts: a Station Number , and a Port Number :  The S tation Number is a two digit num ber which reflects the switch's position in the daisy chain sequence. Note: 1. The first station KL1116 has a [...]

27 Chapter 4 OSD Operation OSD Overview The On Screen Display (OSD) is a menu driven method to handle computer control and switchi ng operations. All pr ocedures start from the OSD Main Screen. To pop up the Main Screen, tap the OS D key (see Dedicate d Invocation Keys , page 68), or tap the [Scroll Lock] key twice. Note: Y ou can optionally change[...]

KL1116 User Manual 28 When you invoke the OSD, a screen similar to the one below appears: Note: 1. The diagram depicts the Administra tor's Main Screen. The User Main Screen does not show the F4 and F6 functions, since they are reserved for the Administrator and can't be accessed by ordinary Users. 2. The OSD always starts in List view , [...]

Chapter 4. OSD Operation 29 OSD Navigation  T o dismiss the menu, and d eactivate the OSD, Click the X at the upper right corner of the OSD W indow; or press [Esc] .  T o Logout, Click F8 or the Z Z Z symbol at the top of the Main Screen, or press [F8] .  T o move up or down through the list one line at a time, Click the Up and Down T rian[...]

KL1116 User Manual 30 OSD Functions OSD functions are used to configure an d control the OSD. For example, you can: rapidly switch to any port; scan selected ports only; limit the list you wish to view; designate a port as a Quick Vi ew Port; create or edit a port name; or make OSD setting adjustments. To access an OSD function: 1. Either Click a F[...]

Chapter 4. OSD Operation 31 F2 LIST This function le ts you broaden or narr ow the scope of which ports the OSD displays (lists) on the Main Screen. Many of the OSD functions only op erate on the computers that are listed on the Main Screen. The submenu choices and their meanings are given in the table below: Double Click the choice you want, or mo[...]

KL1116 User Manual 32 F3 SET This function allows the Administrator and each User to set up their own, individual, working environm ent. A separate profile for each is stored by the OSD and is activated according to th e Username provide d during Log In. To change a setting: 1. Double Click it; or move the highlight bar to it, then press [Enter] . [...]

Chapter 4. OSD Operation 33 (Continued from previous page.) Setting Function PORT ID DISPLA Y MODE Selects how the Port ID is displayed: the Port Number alone ( PORT NUMBER ); the Port Name alone ( PORT NAME ); or the Port Number plus the Port Name ( PORT NUMB E R + PORT NAME ). The default is PORT NUMBER + PORT NAME. SCAN DURA TION Determines how [...]

KL1116 User Manual 34 F4 ADM F4 is an Administrator only fun ction. It allows the Administrato r to configure and control the overall oper ation of the OSD. To change a setting Double Click it; or use the Up and Down Arrow Keys to m ove the highlight bar to it then press [Enter] . After you select an item, a submenu with further choices appears. Do[...]

Chapter 4. OSD Operation 35 (Continued from previous page.) (Continues on next page.) Setting Function EDIT PORT NAMES T o help remember which computer is attached to a particular port, every port can be given a name. This function allows the Administrator to create, modify , or delete port names. T o Edit a port name: 1. Click the port you want, o[...]

KL1116 User Manual 36 (Continued from previous page.) (Continues on next page.) Setting Function SET QUICK VIEW PORTS This function lets the Administrator select which Ports to include as Quick View ports .  T o select/dese l ect a port as a Quick View Port, use the Navigation Keys to move the highlight bar to it, then press [Sp acebar] .  Wh[...]

Chapter 4. OSD Operation 37 (Continued from previous page.) Setting Function SET PS/2 CLK MODE Select the target computer from the list, then use the spacebar to cycle through the choices: 0 PS/2 CLK delay = Off; ASIC filter = On 1 PS/2 CLK delay = On; ASIC filter = Off 2 PS/2 CLK delay = Off; ASIC filter = Of f The default is 0. Unless a computer [...]

KL1116 User Manual 38 F5 SKP This function enables you to easily skip backward or forward – switching the console focus from the cu rrently active KVM port to the previous or next available one.  The selection of comp uters to be available for Skip Mode switch ing is made with the Scan/Skip Mode setting under the F3 SET function (see page 32).[...]

Chapter 4. OSD Operation 39 F7 SCAN This function automatically switches am ong the available computers at regular intervals so that you can monito r their activity without having to take the trouble of switching m anually.  The selection of computers to be included for Auto Scanning is made with the Scan/Skip Mode setting under the F3 SET funct[...]

KL1116 User Manual 40 F8 LOUT Clicking the F8 field, or pressing [F8] logs yo u out of the OSD, and blanks the Console screen. This is different from simply deactivating the OSD when you are at the Main Screen by pressing [Esc]. With this function you must log in all over again to regain access to the OSD, whereas with [Esc] , all you have to do to[...]

41 Chapter 5 Keyboard Port Operation The KL1116 provides an extensive, easy- to-use, hotkey fun ction that makes it convenient to cont rol and configure your KVM installation from the k e yboard. Note: The hotkey function must be enabled to use hotkey operati ons. See HOTKEY COMMAND MODE , page 33, for details. Invoking Hotk ey Mode (HKM) All Hotke[...]

KL1116 User Manual 42 Hotkey Port Access Hotkey Port Access allows you to select which computer has the KVM focus directly from the keyboard. The KL1116 provides the following Hotkey Port Access features:  Selecting the Active Port  Auto Scan Mode  Skip Mode Switching Selecting the Active Port Each KVM port on the KL1116 installation is as[...]

Chapter 5. Keyboard Port Operation 43 Auto Scanning Auto Scanning allows the automatic moni toring of computer activity instead of having to switch manually. In voking Auto Scan Mode causes the K L1116 to switch the KVM focus among all the active KVM Ports that are accessible to the currently logged on user at regular intervals. (See SCAN/SKIP MODE[...]

KL1116 User Manual 44 Invoking Auto Scan Mode To start Auto Scan Mode, key in the following hotkey com bination: 1. Invoke HKM (see page 41). 2. Press [A] . After you press A , you automatical ly exit HK M; enter Auto Scan Mode; and Auto Scanning begins. To exit Auto Scan Mode, press [Esc] or [Spacebar] , or Right Click . Auto Scanning stops when y[...]

Chapter 5. Keyboard Port Operation 45 Skip Mode This feature allows you to switch betw een computers in orde r to monitor them manually. You can dwell on a particular port for as long or as littl e as you like – as opposed to Auto Scanning, which aut omatically switches after a fixed interval. To invoke Skip Mode, key in the following Hotkey comb[...]

KL1116 User Manual 46 Beeper Control The Beeper can be hotkey toggled On and Off. To toggle the Beeper, do the following: 1. Invoke HKM (see page 41). 2. Press and release the [B] key . The Beeper toggles On or Off. The Command Line disp lays Beeper On or Beeper Off for one second; th en the message disappears and you automa tically exit Hotkey Mod[...]

47 Chapter 6 The Firmware Upgrade Utility The Windows-based Firmware Upgrade Uti lity (FWUpgrade.exe) provides a smooth, automated process for u pgrading the KVM switch's firmware. The Utility comes as part of a Firmware Upgrade Package th at is specific for each device. New firmware upgrade pack ages are posted on our web site as new firmware[...]

KL1116 User Manual 48 Prep aration To prepare for the firmware upgrade, do the following: 1. From a computer that is not part of yo ur KVM installation go to our Internet support site and choose the model name that relates to your devi ce to get a list of available Firmware Upgrade Packages. 2. Choose the Firmware Upgrade Packag e you want to insta[...]

Chapter 6. The Firmware Upgrade Utility 49 S t arting the Upgrade To upgrade your firmware: 1. Run the downloaded Firmware Upgrade Package file – either by double clicking the fil e icon, or by openin g a comma nd line and entering the full path to it. The Firmware Up grade Ut ility W elcome screen appears: Note: The screens shown in this sect io[...]

KL1116 User Manual 50 (Continued from previous page.) 3. Click Next to con tinue. The Firmware Upgrade Utility main screen appears. The devices capable of being upgra ded are listed in the Device List panel: 4. As you select devices, a detailed des cription of each appears in the Device Description panel.[...]

Chapter 6. The Firmware Upgrade Utility 51 5. After you have made your device s election(s), Click Next to perform the upgrade. If you enabled Check Firmwar e V ersion , the Utility comp ares the device's firmware level with that of the upgrade files. If it fin ds that the device's version is higher than the upgrade version, it bring s up[...]

KL1116 User Manual 52 Upgrade Failed If the Upgrade Succeeded screen doesn't appear, it means that the upgrade failed to complete successfully. See the next section, Firmware Upgrade Recovery , for how to proceed. Firmware Upgrade Recovery There are three conditions that ca ll for firmware upg rade recovery:  When you invoke Firmware Upgrad[...]

53 Appendix Safety Instructions General  This product is for indoor use only .  Read all of these instructions. Save them for future reference.  Follow all warnings and instructions marked on the dev ice.  Do not place the device on any unstable su rf ace (cart, stand, table, e tc.). If the device falls, serious damage wi ll result. [...]

KL1116 User Manual 54 (Continued from previous page.)  Do not allow anything to rest on the power cord or cables. Rout e the power cord and cables so that they cannot be stepped on or tripped over .  If an extension cord is used with this device make su re that the total of the ampere ratings of all products used on this cord does not exceed [...]

Appendix 55 Rack Mounting  Before working on the rack, make sure that the stabilizers are secured to the rack, extended to the floor , and that the full weight of the rack rests on the floor . Install front and side stab ilizers on a single rack or front stabilizers for joined multiple r acks before working on the rack.  Always load the rack [...]

KL1116 User Manual 56 Consignes de sécurité Général  Ce produit est destiné exclusivemen t à une utilisation à l’intérieur .  V euillez lire la to talité de ces instru ctions. Conservez-les afin de pouvoir vous y référer ultérieu rement.  Respectez l’ensemble des avertissemen ts et instructions inscrits sur l’appareil. ?[...]

Appendix 57  L ’équi pement doit être installé à proximité de la prise murale et le dispositif de déconnexio n (prise de courant femelle) doit être facile d’accès.  La prise murale doit être installée à pr oximité de l’équipement et doit être facile d’accès.  V eillez à ce que rien ne repose sur le cordon d’alimen[...]

KL1116 User Manual 58  L ’unité a été exposée à la pluie ou à l’eau.  L ’unité est tombée ou le boîtier a été endommagé.  Les performances de l’unité sont vi siblement altérées, ce qui indique la nécessité d’une réparation.  L ’un ité ne fonctionne pas normalement bien que les instructions d’utilisation [...]

Appendix 59 Mont age sur bâti  A vant de travailler sur le bâti, assurez-vous que les stabilisateurs sont bien fixées sur le bâti, qu’ils sont étendus au sol et que tout le poids du bâti repose sur le sol. Installez les stabi lisateurs avant et latéraux sur un même bâti ou bien les stabilisateurs av ant si plusieurs bâtis sont réuni[...]

KL1116 User Manual 60 T echnical Support International  For online technical support – inclu ding troubleshooting, documentation, and software updates: http://e serv ice.aten.com  For telephone support, see Telephone Support , page iii. North America When you contact us, please have the fo llowin g information ready beforehand:  Product [...]

Appendix 61 Specifications Function KL1 1 16 Computer Connections Direct 16 Max. 512 (via daisy chain) Port Sele ction OSD, Hot key , Pushb utton Connectors External Console Ports Keybo ard 1 x 6-pin Mini-DIN Female (Purple) Video 1 x HDB-15 Female (Blue) Mouse 1 x 6-pin Mini-DIN Femal e (Green) KVM Ports 16 x SPHD-15 Female (Y ellow) Daisy Chain P[...]

KL1116 User Manual 62 OSD Factory Default Settings The factory default settings are as follows: Connection T able The following table indicates the relationship between the number of KL1116/ KH0116 units and the number of com puters that they control on a daisy chained installation: Setting Default OSD Hotkey [Scr oll Lock] [Scroll Lock] Port ID Di[...]

Appendix 63 Clear Login Information If you are unable to perform an Admini strator login (beca use the Username and Password information has become corrupted, or you have forgotte n it, for example), you can clear the login info rmation with the following procedure: 1. Power off the switch and remove th e top cover from the unit chassis. 2. Short t[...]

KL1116 User Manual 64 Optional Rack Mounting For convenience and flexibi lity, three optional rack moun ting kits are available as shown in the following table: To install the long bracket standard rack mount kit, simply replace the short L brackets on the standard rack mount kit with the long ones, and mount th e KL1116 according to the instructio[...]

Appendix 65 2. Attach the left and right easy-installat ion mounting rails to the inside of the rack. The flange that supports the KL1116 w ill be to the inside. a) Screw the front flanges to the rack first. b) Slide the bars with the rear flanges toward the rack until the fl anges make contact with the r ack, then screw the rear flanges to the rac[...]

KL1116 User Manual 66 (Continued from previous page.) 3. Slide the KL11 16 onto the support flanges. Use the screws supplied with this package to loosely attach the front of th e KL1116 to the front of the rack (only tighten the screws part way). Phillips I head M4 x 6[...]

Appendix 67 4. Slide the rear attachment sliding brack ets along the slide bars until they contact the rear of the KL1116, then use the screws supplied with this package to attach the bars to the rear of the KL1116 (tighten t he screws all the way). 5. Slide the KL1116 open and closed a coupl e of times to be sure that it is properly aligned and op[...]

KL1116 User Manual 68 T roubleshooting Overview Operation problems can be du e to a variety of causes. The first step in solving them is to make sure that all cables are securely attached and seated completely in their sockets. In addition, updating the product’s fi rmware may solve problems that have been discovered and resolved since th e prior[...]

Appendix 69 Limited W arranty ALTUSEN warrants this product against defects in material or workmanshi p for a period of one (1) year from the date of purch ase. I f this product proves to be defective, contact ALTUSEN's support department for repair or replacement of your unit. ALTUSEN will not issue a refund. Return requests can not be proces[...]

KL1116 User Manual 70 This Page Intentionally Left Blank[...]

71 Index A Activate Beeper, 35 ADM, 34 Administrator functions, 34 Auto Scan Invoking, 44 Pausing, 44 Auto Scanning, 39, 43 Scan Durati on, 33 Setting the Scan Interval, 43 Stopping, 44 B Basic Operation, 15 Beeper Activate, 35 Beeper Control, 46 BRC, 38 Broadcast Mode, 38 C Cables, 4 Clear Login Information, 63 Clear the Nam e List, 35 Closing the[...]

72 Port Access, 42 Selecting the Active Port, 42 Skip Mode, 45 Skip mode, 45 Summary Table, 46 I Installation, 9 Daisy Chaining, 13 Single Stage, 11 Introduction, 1 Invocation Keys, 68 Invoke firmware upgrade, 36 Invoking Hotkey Mode , 41 K KL1116 Front View, 5 Rear View, 7 L LCD Adjustment Settings, 23 LIST, 31 Logout, 40 Logout Timeout, 34 LOUT, [...]

Index 73 Scan Duration, 33 SCAN/SKIP MODE, 33 Screen Blanker, 33 Selecting the Active Port, 42 SET, 32 Logout Timeout, 34 Password, 34 USERNAME, 34 Set Accessible Ports, 36 Set Quick View Ports, 36 Setting the Auto Scan Interval, 43 SJ/T 11364-2006, ii Skip Mode, 33, 38, 45 SKP, 38 Specifications, 61 Station IDs, 13 Station Positions Switching, 25 [...]