Barco R5905597/01 manual

PH x x s eri es User and Instal lation manual R5905597/01 28/01/2014[...]

Barc o nv Noordlaan 5, B-8 520 Kuurne Phone: +32 56.36.82.11 Fax: +32 56.36.883.86 Support: www.barco.com/esupport Visit us at the web: www.barco.com Printed in Hyogo Japan[...]

T rade mark, Re gist ered tra de mark • DLP®, D igital Micromirror Device, DMD and B rilliantColor ™ are all trademarks of T exas Instruments. • HDMI, the HDMI logo and High-De fi nition Multimedia Interface are trademarks or registered trademarks of HDM I Licensing LLC. • Microsoft, Windows and Windows Vi sta are ei ther registered t rad[...]

[...]

Tabl e of c ont ent s T ABLE OF C ONTENTS 1 . S a f e t y ...... .... ...... .... ...... .... .... ...... .... ...... .... .... ...... .... ...... .... .... ...... .... ...... .... .... ...... . 5 1.1 General considerations .................... ............... ............... ...................... ............... ....................... . 5 1 . 2 [...]

Tabl e of co nt ent s 7 . I n i t i a l n e t w o r k s e t t i n g s ...... ...... .... ...... ...... .... ...... .... ...... ...... .... ...... ...... .... ...... ...... .... .7 5 7 . 1 S e t t i n g P r o j e c t o r N a m e .................... ............... ...................... ............... ....................... ......... ...... 7 5 7[...]

Tabl e of c ont ent s G l o s s a r y .... ...... .... ...... .... ...... ...... .... ...... ...... .... ...... ...... .... ...... ...... .... ...... .... ...... ...... . 1 3 5 I n d e x ..... ...... ...... .... ...... ...... .... ...... ...... .... ...... ...... .... ...... .... ...... ...... .... ...... ...... .... ..... 1 3 7 R5905597 PHXX SERIE[...]

Tabl e of co nt ent s 4 R5905597 PHXX SERIES 28/01/2014[...]

1. Safety 1. SAFETY About this chapter Read this chapter at tentively . It contains important information to pr event personal inj ury while install ing and using a PHxx seri es projector . F urthermore, it includes several cautions to prevent damage to the PHxx series projector . E nsure that you understand and follow all safety guidelines, safety[...]

1. Safety W ARNING : T o prevent electric shock, do not use this (polarized) plug with an extension cord; receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. C AUTION : Not f or use in a comput er roo m as de fi ned in the Sta ndar d for the Prot ecti on of Electr onic Co m- puter/ Data Processing Equipmen[...]

1. Safety T o prevent personal injury • Mercur y V apor W arni ngs : Kee p the following warnings in mind w hen using the projector . The lamp use d in the projector contains mercury . In case of a lamp rupture, explosion there wil l be a mercury vapor emission. In order to minimize the potenti al risk of inhaling mercury vapors: - Ensure the pro[...]

1. Safety T o prevent the risk of ele ctrical sho ck • Never add any attachments and/or equipment without the approval of the manufacturer as such addit ions may result in the risk of fi re, electric shock or other per sonal injury . • Use 100-240 V AC 50/60 Hz to prevent fi re or electric shock. • The power cords for u se in the U.S., Euro[...]

1. Safety T o prevent projector damage • Unplug this projector from t he wall outlet before cleaning it . D o not use l iquid aerosol cl eaners. U se a damp soft clot h for cleaning. • Do not use this projector near water or in contact with water . • Do not use the projector with condensation on it. It can lead to breakdown or other failur e.[...]

1. Safety About batteries • Use of a battery of wrong type may cause explosi on. • Only Carbon-Zinc or Alkaline-M anganese Dioxide type batteries should be used . • For disposal of used batt eries, always consult federal, state, local and provincial hazardous waste dis posal rules and regulati ons to ensure pr oper disposal. • Before you di[...]

2. Prepa ring the projector 2. PREP ARING T HE PROJECTOR Overview • Projector accessories • T erminology overview • Installati on of the bat teries int o the remote control • Using the remote control • Projector co n fi gurations • Location of ceiling mounting holes • Screen setup • Screen size and projecti on distance • Correcti[...]

2. Prepari ng the pro jector 2.2 T erminology overview Remote control 1 4 2 6 7 3 5 Image 2-1 1 ON/OFF / P OWER key ( ON/ST ANDBY) The status is changed between ON and ST ANDBY . 2 Transmission windows 3 Indicators 4 ▲ , ► , ▼ , ◄ keys 5 OK/E NTER ke y 6 HOME/MENU key 7 Battery compartment T op and side projector 2 3 6 8 7 9 10 4 5 1 9 9 Im[...]

2. Prepa ring the projector 4 Intake vent/Fil ter cover (inside of the si de cover) 5 Intake vent 6 Lens 7 T erminal panel (inside of the rear cove r) 8 Remote control sensor ( rear) 9 Ex haust vent 10 Lamp cover (inside of the slide cover) Bottom side projec tor 2 1 3 Image 2-3 1 Lock bar (SECUR ITY ANCHOR) Attach a chain, etc. to this l ock bar t[...]

2. Prepari ng the pro jector 5 HDMI IN terminal (HDMI 19-pin) 6 COMPUTER/COMPO NENT VIDEO DVI-D IN (HDCP) ter minal (DVI- D 24-pin) 7 SDI IN terminal (for P HWU-81B only) 8 LAN term inal 9 REMOTE1 IN terminal (D-SUB 9-pin fem ale) 10 SERIAL IN and OUT terminals (D-SUB 9-pin male) 11 REMOT E 2 IN and O UT terminals Do not use these terminals. 12 Ken[...]

2. Prepa ring the projector 2.4 Using the remote control Operational range Dire ct point ing Operate the remote control wit hin a distance of 15 m (49.2 feet) from the projector , pointing the light beam at the remote control photo-sensor (front or rear) of the pro jector . ± 30° ± 30° ± 30° ± 30° Image 2-6 Front and b ack control • Keep [...]

2. Prepari ng the pro jector 2.5 Projector con fi gurations Front projection The projector is installed, either in a table mount or ceiling mount con fi guration, at the same side of the screen as the audience. Image 2-9 For ceiling mounting, you need t he ceiling mount kit designed for this projector . A sk a specialist f or installation. F or d[...]

2. Prepa ring the projector 2.6 Location of c eiling mounting holes Location 342 169 240 A 192 A Image 2-1 1 A : 4 mounting holes for cei ling mount plate. (M 4, depth 10 mm ) 2.7 Scree n setup Environment che ck Before setting up the projector , check the operating environment. If the environmental requirements are not satis fi ed, the projector [...]

2. Prepari ng the pro jector H0 H0 W1 H1 H2 H L W1 W L W1 H1 H2 H L W1 W L C C A A II I Image 2-12 I Fornt proj ection II Front project ion, ceiling mou nted A Maximum projecti on area C Center of the lens For PHWU-81B, w hen the aspect ratio is “FU LL” (Display at 1920 x 1200 pixe ls) Size of projector image ( 16:10) Projector distance (L) Len[...]

2. Prepa ring the projector For PHWX-81 B, when the aspect r atio is “FULL” (Disp lay at 1280 x 800 pixels) Size of projector image (16:10) Projector distance (L) Lens shift height Lens shift widt h Diagonal size Width (W) Height (H) Shortst r (Wid e) Longest (T ele) Movement distance (H1) Movement distance (H2) Mov emen t distance (W1) inch cm[...]

2. Prepari ng the pro jector 2.9 Correcting skew ed or distorted image Probl em For the best projection, projec t images on a fl at screen install ed at 90 degrees to the fl oor . If necessary , tilt the projector using the two adjustment feet on the bottom of the projector . F S Image 2-13 S Screen F Ad justable fe et How to adjust 1. T ilt up t[...]

3. Connectio ns 3. CONNECTIONS Prepar ations T o get access to the connections, the covers of the projector must be rem oved. C AUTION : Only authorized service personnel are all owed to remove the covers. 3.1 R emoving the covers W ARNING : Make sure that the pow er of the projector is turned off. R e m o v i n gt h es i d ec o v e r 1. Loosen two[...]

3. Connectio ns (d) (e) Image 3-2 Rear cover removal 3.2 Power connec tion W ARNING : In order to ensure the saf ety in case of trouble with the projector , use an electrical outlet having an earth leakage breaker to supply the power to the projector . If you do not have such outlet, ask your dealer to install it . About the power cord • The powe[...]

3. Connectio ns T ake care for the following points • Plug in the power cord fi rmly . W hen unplugging, hold and pull the power plug, not t he power cord. • Do not plug in or out the power cord with your hand wet. It may cause electric shock. • When you move the projector , turn of f the power , unplug the power cord from the wall outlet, a[...]

3. Connectio ns C Computer ca ble (opti on) D Connector to Vi deo1 2. Connect the other end of the BN C cable to the 5 BNC terminals of the monitor port of the computer . Digital connection to DVI-D IN 1. Connect one end of a commercially availabl e DVI cable t o the COMPUTER/COM PONENT VIDEO DVI-D IN (HDCP) terminal of the projector . 2 1 D C B A [...]

3. Connectio ns 1 E D C A B Image 3-7 1 BNC plug A Video pl ayer or t he like B BNC-RXA adapter (optio nal) C T o video output termi nal D B?C cable (o ptional) E T o VIDEO IN terminal (BNC) 2. Connect the other end of the BNC cable to the video output terminal of the video equipmen t. Connecting to vid eo equipment, equipped with S-V ide o 1. Conn[...]

3. Connectio ns • HDCP (High-bandwidth Digital Content Protection), developed by Intel Corporation, is a m ethod to encrypt digital video data for the purpose of copy pr otection. • HDMI (High-De fi niti on Multimedia Interface) is fully backw ard compatible with computers, displays a nd consumer electronics devices incorporating t he DVI stan[...]

3. Connectio ns 3.5 Installi ng the covers Installing the rear cove r 1. Insert the rear cover (e) into the projector and tighten four screws (d) on the rear cover us ing a Phillips screwdriver . (d) (e) Image 3-12 Rear cover mounting Installing the side cover 1. Insert the side cover into th e projector and tight en two screws (a) on the rear and [...]

3. Connectio ns 28 R5905597 PHXX SERIES 28/01/2014[...]

4. Getti ng started 4. GETTING ST ARTED 4.1 Basic Remote control, indications Overview Image 4-1 ON/OFF HOME OK ARROW RIG HT ( ► ) ARROW U P ( ▲ ) ARROW LEF T ( ◄ ) ARROW DOW N ( ▼ ) LED INDICA TION BA T TERY COMP ARTMENT IR LED s R5905597 PHXX SERIES 28/01/2014 29[...]

4. Get ting s tarted Basic act ions Result RCU Lite: action start the projector press on/of f turn of f the projector press on /off > show main menu on s creen press home move through menu press arrow keys select b utton press ok select and retur n to previous m enu press ok return to previous menu without s electing press home clear OSD Lite o [...]

4. Getti ng started Hotkey / Short Cut Remote Command result RCU Lite → OSD Li te action → on screen to quick adjust a burry screen > > mute picture and sound on the projector > unmute picture and sound on the projector press any key main menu is on screen, go to button required result RCU Lite → OSD Lite Action → on screen select [...]

4. Get ting s tarted main menu is on screen, go to button required result RCU Lite → OSD Lite Action → on screen adjust keystone and/or and/or > select language > go to lamp mode desired (default setting = NORMAL > show lam p info > show lamp mode > and/or go to lamp mode desired ( default setti ng =N O R M A L > show projecto[...]

4. Getti ng started - It may take about 2 minutes for the lamp to light up. - The lamp fails to light up on rar e occasions. In such a case, wait for a f ew minutes and then tr y again. - A fte r the ON/OFF key is pressed, t he image may fl icker before the lamp becomes stable. This is not a product malfunction. - The lamp operation becomes s tabl[...]

4. Get ting s tarted - The ST A TUS Led will go out. - If the power cord should be unplugged ac cidentally whil e either the air inlet f an or the air outlet fans are operating or the lamp is on, allow the projector to c ool down for 10 minutes wit h the power of f. T o light the lamp again, pr ess the ON/OFF key . If the lamp doesn’t light up im[...]

4. Getti ng started - When the ▼ key is pressed, the image moves dow n. - When the ▲ key is pressed, the image mov es up. - When the ► key is pressed, the image moves to the right. - When the ◄ key is pressed, the image moves to the left. Be careful not to be caught in the opening in the lens while the lens is moving. While the lens shift i[...]

4. Get ting s tarted Image 4-9 4. Adjust t he keystone by pr essing the ▲ , ◄ , ▼ or ► key . In the following c ases (for front projection): Image 4-10 5. Press the ON/OFF , OK or HOME key to exit the m enu. Important • For proper KEYSTONE-mode adjustment results, reset the lens to the fac tory-adjusted position using L ENS SHI FT RESET i[...]

4. Getti ng started The MUTE screen appears. “MUTE ON - PRESS ANY KEY TO EXIT” is display ed for 3 seconds. Then, the mechanical shutter is closed and the projector goes into the BLANK m ode. 2. T o cancel the BLANK mode, press any key on the remote control . 4.8 Auto position mode Act as follow When the image supplied from the computer is disp[...]

4. Get ting s tarted 38 R5905597 PHXX SERIES 28/01/2014[...]

5. Adva nced me nu 5. ADV ANCED M ENU 5.1 S tarting the advanced menus How to set 1. Press HOME key to display the OSD Lite menu. Image 5-1 2. Use the arrow keys to select ADV A NCED and p re ss OK . The enter password menu is displayed. Image 5-2 3. Enter the pass code. Default password : ◄◄►▼ The menu selection bar is displayed. IMAGE INS[...]

5. Adv anced menu The selected menu is displayed. IMAGE INSTALL1 INSTALL2 MULTI- SCREEN FEATURE SIGNAL NETWORK INFO COMPUTER 0 COLOR 0 TINT 0 SHARPNESS ADVANCED MENU COLOR MA TRIX SUPER RESOLUTION BRIGHTNESS 0 COLOR ENHANCER AUTO CONTRAST ST ANDARD COLOR TEMP . 0 ENTER ON Image 5-4 The item being se lected is displayed in red letters. 6. Press the [...]

5. Adva nced me nu INST ALLA TION 2 menu 16:10 IMAGE INSTALL1 INSTALL2 MULTI- SCREEN FEATURE SIGNAL NETWORK INFO REMOTE 1 MODE FIL TER MENU AUTO POWER ON AUTO POWER OFF OFF ON IMAGE AUTO 5min IMAGE CAPTURE SPLASH SCREEN DVI LONG CABLE BACK COLOR ENTER ENTER SETUP SCREEN Image 5-7 MUL TI-SCREEN m enu IMAGE INSTALL1 INSTALL2 MULTI- SCREEN FEATURE SIG[...]

5. Adv anced menu 5.3 Image menu Overview 0 0 0 0 0 0 IMAGE INSTALL1 INSTALL2 MULTI- SCREEN FEATURE SIGNAL NETWORK INFO COMPUTER COLOR TINT SHARPNESS ADVANCED MENU COLOR MA TRIX SUPER RESOLUTION BRIGHTNESS COLOR ENHANCER CONTRAST ST ANDARD COLOR TEMP . ON AUTO ENTER IMAGE INSTALL1 INSTALL2 MULTI- SCREEN FEATURE SIGNAL NETWORK INFO ADV ANCED MENU NO[...]

5. Adva nced me nu Item Setting Functi on CTI ON / OFF Us e to correct smeared color boundaries. INP UT LEV EL ±5 For analog signal input: The input level of video signal dif fers among devices to be c onnected. High input level causes solid white in displayed im age and low input level causes displayed image to get dark. Use this menu to adjust t[...]

5. Adv anced menu 5.4 Installati on 1 menu Overview IMAGE INSTALL1 INSTALL2 MULTI- SCREEN FEATURE SIGNAL NETWORK INFO LAMP MODE LAMP SELECT ST ANDARD 1H/24H LOW OFF ST ANDARD DUAL LAMP RELA Y HIGH AL TITUDE MODE ST ANDBY MODE IMAGE REVERSE LENS LOCK ENTER GEOMETRY ENTER TEST P A TTERN ENTER SPLIT ENTER AUTO POSITION ENTER IMAGE INSTALL1 INSTALL2 MU[...]

5. Adva nced me nu Item Setting Functi on GEOMETR Y ENTER The geom etry adjustment menu is displayed. TEST P A TTERN ENTER The test pattern is displayed. SPLIT (for PHWU-81B/ PHW X-81B only) ENTER The split screen is displayed. PIP (for PHXG-91B only) EN TER The picture-in-picture (PIP) screen is displayed. AUTO POS ITION ENTER The au to position f[...]

5. Adv anced menu Item Setting Functi on DVI LONG CABLE AUTO Select this option for normal use. MANUAL Use to adjust the amount of transmission signal correction when a long DVI cable is used. REMOTE 1 MODE ENTER Select when controlling the projector by a control panel connected to the REMOT E 1 IN terminal. PIN 1 GND Unchangeable. (Fixed.) PIN 2 P[...]

5. Adva nced me nu Item Setting Functi on RESET Use to reset the values of EDGE ADJUS T , BLACK LEVEL and BRIGHT UNIFORMITY CORRECTION to the def aults. COLOR MA TCHING OFF S elect thi s option when t he projector is used alone. MANUAL Select this option when adjusting colors while v iewing the screen to correct color variations among the projector[...]

5. Adv anced menu Item Setting Functi on FILM F i x e dt ot h e fi l m mode. VIDEO The fi lm mode will not be activated. LANGUAGE Diff erent languages Use to select the language used in the menus. ADV A NCED M ENU ENT ER The ADV A NCED ME NU is displayed for the fol lowing settings. VIDEO SIGNAL AUTO / NTSC / P AL / SECAM / 4.43NTSC / P AL-M / P [...]

5. Adva nced me nu 5.8 SIGNAL menu Overview 0 0 0 0 1024 x 768 60.00 Hz 48.36 KHz 1024 768 1 0 0 0 0 1 IMAGE INSTALL1 INSTALL2 MULTI- SCREEN FEATURE SIGNAL NETWORK INFO 100% COMPUTER INPUT AUTO OVER SCAN HOLD USER FINE SYNC. VERT . POSITION MEMORY CALL RESOLUTION (MEMORIZE ) AUTO HORIZ. POSITION TRACKING ENTER ON ASPECT NORMAL SIGNAL MEMORY MEMORIZ[...]

5. Adv anced menu Item Settin g Functi on CANCEL OK The process to change the current resol ution is canceled and the SIGNA L menu is displayed. HORIZ. POSITI ON 0 -999 Use to adjust the horizontal positi on of the projected image. VE RT . PO S ITIO N 0-999 Use to adjus t the vertical positi on of the projected image. FINE SYN C. 0-31 Use to elimin[...]

5. Adva nced me nu Item Settin g Functi on 4:3 Regardless of the type of input signal, image is displayed at 4:3 aspect ratio. USER Displays the det ailed settings. USER ENTER The USER men u is displayed for the following adjustments. CLAMP POSITION 1-255 Use to correct solid white or solid black i n the projected image. CLAMP WIDTH 1-63 U se to co[...]

5. Adv anced menu Item Settin g Functi on NETWORK CE RTIF ICA TIO N ON /O F F Select whether to enable the network certi fi cation or not. Select O FF for normal use. IP CONFIG ENTE R Select this s etting for IP Con fi gura tion. DHCP ON Select this setti ng when you obtain IP CO NFIG automatical ly by DHCP server . OFF Select this setting when y[...]

5. Adva nced me nu Item Description LAMP 2 T IME (LOW) T his item shows the lamp operati on time calculated based on that the LAM P MODE of LAMP 2i s L O W . → When the LAMP MODE is ST ANDARD, this item s hows a longer lamp operating time than the actual time. → When the lamp ope rating time is 0 to 10 hours, “0 H” is displayed. The lamp op[...]

5. Adv anced menu 54 R5905597 PHXX SERIES 28/01/2014[...]

6. Adj ust ments wi th the AD VAN CED men u 6. ADJUSTMENTS WITH THE ADV ANCED MENU 6.1 T o adjust the brightness (CONTRAST and BRIGHTNESS) How to adjust 1. Display the IMAGE m enu. 2. Select CONT RAST or BRIGHTNESS by pressing the ▲ or ▼ key . 3 . A d j u s tt h es e l e c t e di t e mb yp r e s s i n gt h e ◄ or ► key . 4. T o cancel the m[...]

6. Adjustment s with the ADVANCE D menu How to select 1. Display the IMAGE m enu. 2. Select COLOR TEMP . by pressing the ▲ or ▼ key . 3. Select your desired color temperature by pressing the ◄ or ► key . 4. T o cancel the menu, press the MENU key . T o c ustomize the colo r temperature 1. Select COLOR T EMP . in the IMAG E menu. 2. Press th[...]

6. Adj ust ments wi th the AD VAN CED men u 5. Select an item you want to set by pressing the ▲ or ▼ key . GAMMA mod e Use this item t o set the gamma optimally . When U SER is selected: DYNAMIC Select when viewing images s upplied from t he computer . NA TURAL Select when viewing images supplied from the v ideo device. DET AIL Select when view[...]

6. Adjustment s with the ADVANCE D menu COLOR MATRIX −USER RED YELLOW GREEN CYAN 0 BASE COMPUTER 0 0 0 BLUE MAGENTA SATURATION 0 RGB-TINT 0 0 0 0 0 0 0 0 0 0 0 COLOR MATRIX −USER RED YELLOW GREEN CYAN BASE COMPUTER BLUE MAGENTA SATURATION RGB-TINT Image 6-7 4. Press the ENTER key . 5. Select an item you want to set using the ▲ or ▼ key . - [...]

6. Adj ust ments wi th the AD VAN CED men u 3. Select your desired aspect ratio by pr essing the ◄ or ► key . - Select the aspect ratio from NORMAL, 16:9, NA TIVE (for PHWU-81B/PHW X-81B only), 4:3, and FULL. - When 16:9 is selected by SCREEN in the INST ALLA T ION 2 menu, 16:9 cannot be select ed. - When 4:3 is selected by SCREEN in the INST A[...]

6. Adjustment s with the ADVANCE D menu WXGA signal 1280 x 800 (16:10) 16:10 1280 x 800 16:9 1280 x 72 0 16:10 1280 x 800 4:3 1066 x 800 16:10 1280 x 800 WXGA signal 1280 x 768 (16:9.6) 16:9.6 1280 x 768 16:9 1280 x 72 0 16:9.6 1280 x 768 4:3 1066 x 800 16:10 1280 x 800 • In such cases as when you keep projecting images in the narrower area than [...]

6. Adj ust ments wi th the AD VAN CED men u 100 100 0 0 0 0 ASPECT − USER ZOOM(V) HORIZ. POSITION VERT . POSITION RASTER POSITION(H) ZOOM(H) RASTER POSITION(V) RESET OK Image 6-9 ASPECT-U SER setting supports the COMPUTER1, CO MPUTER2, DV I, and HDMI terminals only . Therefore, you cannot select USER for other terminals. 4. Press the ENTER key . [...]

6. Adjustment s with the ADVANCE D menu 2. Select SIGN AL MEMOR Y w hile AUTO is selected in the MEMO RY CALL by pressing the ▲ or ▼ key. 3. Select MEMOR IZ E and press the ENTER ke y . 4. Select your desired memory numb er by pressing the ◄ or ► key . 5. Press the ENT ER key to save the memory . - T o save the new setting, select a new mem[...]

6. Adj ust ments wi th the AD VAN CED men u Adjustment is completed. When the size and position of the computer image are not correct. Pr oject a bright computer image containing as many texts and characters as possible. Note) Disable the screen saver if it is active. Select AUTO POSITION in the INPUT menu of the OSD Lite menu and press the OK key.[...]

6. Adjustment s with the ADVANCE D menu The projected image is displaced horizontall y . Adjust HORIZ. POSITION in the SIGNAL menu. Every time the ◄ key is pressed, the image m oves to the right. Every time the ► key is pressed, the image moves to the l eft. The projected image is displac ed vertically . Adjust VERT . POS ITION in the SIGNAL me[...]

6. Adj ust ments wi th the AD VAN CED men u 2. Select EDGE BL ENDING by p ressing the ▲ or ▼ key . EDGE BLENDING OFF Image 6-1 1 3. Select ON by pressing the ◄ or ► key . 4. Select SETTING by pressi ng the ▲ or ▼ key . SETTING EDGE ADJUST Image 6-12 5. Select EDGE AD JUST by pressing the ◄ or ► key . 0 12 8 SETTING - EDGE ADJUST EDG[...]

6. Adjustment s with the ADVANCE D menu 14.Select a setting value by p ressing the ◄ or ► key . 15.R epeat step 13 and s tep 14, if necessary . 16.Press t he MENU key once. 17.Select B RIGHT UNIFORMITY CORRECTION by pressing the ◄ or ► key . SETTING BRIGHT UNIFORMITY CORRECTION Image 6-16 → When EDG E BLENDING is ON, the brightness of the[...]

6. Adj ust ments wi th the AD VAN CED men u 10 0 0 0 - - - - - - - - - MANUAL – SETTING COLOR GAIN SATURATION HUE RED WHITE R WHITE G WHITE B AUTO P ATTERN ON Image 6-20 7. Select an item you want to set by pressing the ▲ or ▼ key . Select the color you want to adjust using COLOR . When you s et AUTO P A TTE RN to ON, the test pattern of each[...]

6. Adjustment s with the ADVANCE D menu 6.19 Wh en the p roje cted ima ge is dis tort ed What should happen: When the projected image is distorted, carry out any of the KEYSTONE, CORN ERSTONE, and CURVED mode adjustments to correct the dist ortion. When the image distorts in a trapezoid shape, use the KEYSTONE-mode adjustment. For fi ne adjustment[...]

6. Adj ust ments wi th the AD VAN CED men u Important • For proper KEYSTONE-mode adjustment results, reset the lens to the fac tory-adjusted position using LENS SHIFT RESET in the INST ALLA TION 1 menu before carrying out KEYSTONE-m ode adjustment. • When the KEYSTON E-mode adjustment is carried out, t he adjustment value is indicated. Note tha[...]

6. Adjustment s with the ADVANCE D menu Important • When the CORNE RSTONE-mode adjustment takes effect, the r esolution decreases. In addition, stripes may appear or straight lines may bend in images with complicated patterns. T hey are not due to product malfunctions. • When the C ORNERSTONE-m ode adjustment is performed, the displaye d image [...]

6. Adj ust ments wi th the AD VAN CED men u Image 6-29 When the horizontal arc adjustment is positive (+) (or the ARC is adjusted in the ▲ direction) Image 6-30 Adjusting the origin to the vertical arc When the vertical arc adjustment is negative ( -) (or the ARC is adjusted in t he ◄ direction) Image 6-31 When the vertical arc adjustment is po[...]

6. Adjustment s with the ADVANCE D menu Image 6-32 When yo u press the ◄ or ► key in the RESE T mode, the distortion correction is r eset. Important • When the CURVED-m ode adjustment takes effect, the resolution decreases. I n addition, stripes may appear or straight lines may bend in images with complicated patterns. They are not due to pro[...]

6. Adj ust ments wi th the AD VAN CED men u How to set 1. Display the INST ALLA TION 1 menu. 2. Select IMAGE RE VERSE by pressing the ▲ or ▼ key. OFF IMAGE REVERSE Image 6-34 3. Select OFF , MIRROR , INVERT or MIRROR INVERT by pressing the ◄ or ► key . 6.22 Displaying TEST P A TTERN How to display 1. Display the INST ALLA TION 1 menu. 2. Se[...]

6. Adjustment s with the ADVANCE D menu 74 R5905597 PHXX SERIES 28/01/2014[...]

7. Initial net work se ttings 7. IN IT IAL N ETW ORK SE TT INGS Where to fi nd the settings Y ou can set the network of the pr ojector using the NETWORK menu in the ADV ANCED menu of the OSD Lit e menu. IMAGE INSTALL1 INSTALL2 MULTI- SCREEN FEATURE SIGNAL NETWORK INFO CONTROL SYSTEM NETWORK P ASSWORD NETWORK CERTIFICA TION PROJECTOR NAME IP CONFIG[...]

7. Initial ne twork settings 7.2 Enabling or disabl ing the network cert i fi cati on About network certi fi ca tio n Y ou can select whether or not to certi fy the network communication using the networ k password. For details, contact your dealer . How to enable-disable 1. Display the NETWORK menu. 2. Press the ▲ or ▼ key to select NET WO R[...]

7. Initial net work se ttings If the entered password is not correct, CURRENT NETW ORK P ASSWORD s creen appears again. A OK caps CLEAR DEL CANCEL B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 ← → ↔ ∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗ ∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗[...]

7. Initial ne twork settings How to set o r clear 1. Display the IP CONFIG menu. 2. Press the ▲ or ▼ key to select DHCP . DHCP ON Image 7-1 1 3. Press the ◄ or ► key to selec t ON or OFF . → When s etting DHCP to ON , IP ADDRE SS, SUBNET MASK, and DEF AUL T G A TEWA Y cannot be set. If you s et those settings, set DHCP to OF F and perform[...]

7. Initial net work se ttings 0. 0. 0. 0 SUBNET MASK Image 7-14 3. Press the ENTER key . SUBN ET MASK screen appears. 255 . 255 . 255 . 0 0 OK CLEAR DEL CANCEL 1234567 8 9 ← → SUBNET MASK Image 7-15 4. Enter the Subnet Mas k. Refer to IP Addre ss Settings for the detail of entering. 5. Whe n selecting OK , the setting i s completed as the Subne[...]

7. Initial ne twork settings → The setting change dialog is displaye d . A fter the dialog disappears, the NETWORK menu is displayed. → I tm a yt a k es o m et i m et or e fl ect the settings. 7.5 Setting the control sy stem How to set 1. Display the NETWORK menu. 2. Press the ▲ or ▼ key to select CONTROL SYSTEM . CONTROL SYSTEM ST ANDARD [...]

8. Lamp r elay 8. LA MP R ELA Y Overview Using the lamp relay funct ion, you can project images continuously . The lamp relay function automatically rests or switches the lamps. T he lamp relay is perf ormed when LAMP SELECT in the INST A LLA TION 1 menu is se t to DUAL or SINGLE in the AD- V ANCED m enu of the OSD Lite menu. 8.1 Sett ing the lamp [...]

8. Lamp rela y → When you select 1H/24H or 2H/1W , the box to set the lamp relay interval is displayed. → When the projector is tur ned off, t he setting is c leared and the projector r esumes operation from the time of the power -on or menu setting shown in the pr eceding step. 1H/24H 23H 0 OK CLEAR DEL CANCEL 123456 7 8 9 ← → NEXT LAMP RE[...]

8. Lamp r elay 8.2 Sett ing the lamp relay interva l, LAMP SELECT is set to SINGLE The lamps are automatically switched and used altern ately . How to set 1. Display the INST ALLA TION 1 menu. 2. Select LAMP SELECT by pressing the ▲ or ▼ key . LAMP SELECT DUAL Image 8-8 3. Press the ENTER key . 4. Select SIN GLE by pressing the ◄ or ► key .[...]

8. Lamp rela y → Maximum interval 24H 24H (24 hours) 1W E E K 7D 00H (7 days and 00 hours) ← key S hifting the posit ion of enter cursor to the lef t for each character . → key Shifting the position of enter cur sor to the right for each character . DEL key Deleting the character in the position of enter cursor f or each character . CLEAR key[...]

9. Ad vanced fea tures 9. ADV A NCED FEA TURES 9.1 Pass word function About the password func tion This projector is equipped with the password function that i s designed for prevention of wrong oper ation by children and restriction on operation by other t han speci fi ed users. The password function has 3 modes as follows. DISPLA Y INPUT When th[...]

9. Ad vanced feat ures 9.1.2 Ca ncel th e passwo rd fun ction How to canc el 1. Display the FEA TURE menu. 2. Press the ▲ or ▼ key to select P ASSWORD FUNCTION . 3. Press the ENTER key . The screen for canceling the password function will appear . IMAGE INSTALL1 INSTALL2 MULTI- SCREEN FEATURE SIGNAL NETWORK INFO DISPLA Y INPUT LOCK UNLOCK ENTER[...]

9. Ad vanced fea tures 3. Press ENTER key . The screen is split in two and the left and ri ght screens display the following images: Left screen Image supplied to the last selected input source, VGA (COMP UTER1), 5BNC (CO MPUTER2), DVI, HDMI or SDI (for PHW U-81B only) Right screen Image supplied to the last selected input source, VIDEO or S-VID EO[...]

9. Ad vanced feat ures 4. Repeat the pre vious steps to remove the PIP mode. 5. T o change the position of the sub image, press the ◄ or ► key on the remote control. Important • The PIP m ode is available only when the ASP ECT ratio is set to NOR MAL. • The PIP mode isn’t available with some input signals. • When the main image signal i[...]

9. Ad vanced fea tures • For the commands for PJLink™, see the table on the next page. • The control may not be per formed correctly or the monitoring data may not be obtained correctl y in t he following conditions : - During standby - During zoom/focus adjustment - During lens shift adjustment - During input source switching - During auto p[...]

9. Ad vanced feat ures Command Description Remark (Parameter) LAMP? Inquiry about the lamp state 1st value (1 to 5 digits): C umulative LAMP 1 oper ating time (This item shows a lamp operating ti me (hour) calculated based on that LAMP MODE i s ST ANDARD . ) 2nd value: 0 = Lamp off, 1 = Lamp on 3rd value (1 t o 5 digi ts): Cum ulative LAMP 2 operat[...]

9. Ad vanced fea tures Import ant: In a system usi ng a serial di vider , don’t connect the projectors as a bove. T o monitor and control the projec tors collectivel y or indivi dually , it is necessary t o assign GROUP IDs to them. Setting GROUP ID s By dividing the projectors i nto groups, you can monitor and control them collectively by gr oup[...]

9. Ad vanced feat ures A B C Image 9-9 AT o R E M O T E 1 I N B RS-232C cabl e (option) C Control panel 1. Connec t one end of an RS-232C cable to the REMOTE 1 IN terminal on the projector . 2. Connec t the other end of the RS-232C cable to the control panel. Pi n functi ons (d efau lts) Connect the other end of the RS -232C cable to the contr ol p[...]

10. Lam p repla cemen t 10. LAMP REPLACEMENT 10.1 Lamp replacement warnings W a rnings • Be careful not to drop the lamp fi xing screws into the ins ide of the projector . Don’t put a metal piec e or fl ammable object into the projector . Using the projector with any foreign object present inside may result in electric shock or fi re. When y[...]

10. Lam p rep lac emen t Image 10-1 10.3 Lamp replacement C AUTION : Only authorized service personnel are all owed to remove the covers. How to replace 1. Unplug the power cord from the outlet or appliance inlet . 2. Loosen two screws (a) on the r ear and two screws (b) on the side t hat are securing the s ide cover (c) using a Phillips screwdrive[...]

10. Lam p repla cemen t (e) (d) Image 10-4 5. Loosen two screws (f) t hat are securing the lamp box to be r emoved using a Phillips screwdriver . 21 (f) (f) Image 10-5 6. Pull the handle. 7. Pull out the lamp box by the handle while holdi ng the projector . Image 10-6 - Pull the lamp box out of the projector slowly . When the lamp is broken, glass [...]

10. Lam p rep lac emen t (e) (d) Image 10-9 Note: Y ou canno t tur n on the projector w ithout attac hing the lamp cover . 12.Insert the side cover (c) into the projector and tighten two screws (a) on the rear and two screws (b) on the side of the side cover using a Phillips screwdriver . (c) (b) (a) Image 10-10 10.4 Reset of the lamp operati on ti[...]

10. Lam p repla cemen t Important • When the operation times of both lamps have exceeded 4000 hours 3 , you can operate the pr ojector only for 3 minutes after turning on the powe r . During this t ime, carry out s teps 15 to 20 to r eset the l amp operation times. • The projector doesn’t t urn on if t he lamp cover isn’t at tached securely[...]

10. Lam p rep lac emen t 98 R5905597 PHXX SERIES 28/01/2014[...]

11. Mainte nance 1 1. MAINT ENA NCE W ARNING : Do not use fl am mable solvents (benzene, thinner , etc.) and fl ammable aerosol s when cleani ng the projector body and lens. Flammab le substances may ignite causing fi re or bre akdown whi le the l amp is ill uminat ing. C AUTION : Be sur e to t urn of f the l amp and un plug t he power cord from[...]

11. Mainte nance FIL TER MENU ENTER Image 1 1-1 3. Press the ENTER key . 4. Select CLEANUP PERIOD by pressing the ▲ or ▼ key . CLEANUP PERIOD 1 WEEK Image 1 1-2 5. Select 24H or 1W E E K by pressing the ◄ or ► key . 24H The fi lter is cleaned about every 24 hours. 1W E E K The fi lter is cleaned about every 168 hours. 6. Press the ENTER k[...]

11. Mainte nance - The value of each item is ou t of the setti ng range. D 8o ro v e r( 1W E E K only ) H 7D 01H or over 8. Select OK to accept the i nterval you enter ed and exit t he menu, or select CANCEL to exit the menu without saving the sett ing. When you select OK or CANCE L ,t h e CLEANUP PERIOD menu is disp layed. 1 1.3.2 How to clean the[...]

11. Mainte nance Image 1 1-7 4. Remove the dust box from the automatic cleaning fi lter and get ri d of the dust from it. Suck dirt and dust from the automatic cleaning fi lt er and projector using a vacuum cleaner . Image 1 1-8 5. Attach t he dust box t o the automatic cleaning fi lter . Image 1 1-9 6. Attach the automatic cl eaning fi lter . [...]

12. Tr ouble shoot ing 12. TROUBLESH OOTING Advise Before asking for repair of t he projector , check the following. If th e symptom persists, stop using the projector , be sure to unplug the power plug, and then contact your dealer . 12.1 No image appears on the scre en Overview Probl em Sol uti on Power can not be turned on. C heck whether the ST[...]

12. Tr ouble shoot ing 12.2 Images are not displa yed correctly Overview Probl em Solut ion Projected images are shaking. Projected images are displace d. The edge of t he projected images is not displayed. • Check that the cable c onnected to the external device isn’t intermittent. • Connect the cable’s pl ug with the external device’s c[...]

12. Tr ouble shoot ing Probl em Sol uti on Only the motion areas in the images supplied from the computer aren’t displayed. This is caused by the computer being used. Contact the manufacturer of your c omputer . Projected images are obscured. • Match the output resoluti on of your co mputer with the resolution of the projector . For the method [...]

12. Tr ouble shoot ing Probl em Sol uti on The keys on the projec tor (except for the POW ER key) don’t function. • P ASS WORD FUNCT ION in the FEA TU RE menu has be en set to MENU ACC ESS to enable the password lock. → Cancel the password lock or contact t he person in charge of management of the projec- tor. • Check that the projector isn[...]

13. Spec ificatio ns 13. SPECIFICA TIONS 13.1 Speci fi c ations of PHXG-91B Overview Projec tor ty pe XG A single-chip DLP pr ojector T echnology 0. 70" DMD Color wheel 4S standard (RGBW) Resolution 1, 024 x 768 XGA Brig htnes s 8,500 ANSI lumens / 6,200 ANSI lumens (eco-mode) (complies with ISO 21 1 18) Contras t rati o 2,800:1 Brig htnes s [...]

13. Spec ificatio ns 13.2 Speci fi c ations of PHWX-81B Overview Projec tor ty pe W XGA single-chip DLP projector T echnology 0. 65" DMD Color wheel 4S standard (RGBW) Resolution 1, 280 x 800 WXGA Brig htnes s 7,300 ANSI lumens / 5,300 ANSI lum ens (eco-mode) (compliant with ISO 21 1 18) Contras t rati o 2,800:1 Brig htnes s uniform ity 70% A[...]

13. Spec ificatio ns 13.3 Speci fi c ations of PHWU-81B Overview Projec tor ty pe W UXGA single-chip DLP projector T echnology 0. 67" DMD Color wheel 4S standard (RGBW) Resolution 1, 920 x 1,200 WU XGA Brig htnes s 7,500 ANSI lumens / 5,450 AN SI lumens (eco-m ode)(compliant with ISO 2 1 1 18) Contras t rati o 2,800:1 Brig htnes s uniform ity[...]

13. Spec ificatio ns 13.4 Speci fi c ation of RGB signals in eac h co mputer mode of the projector For PHWU-81B Overview Plug and Play 4 Signal mode Resolution (H x V) Horizon- tal fre- quency (kHz) Ve r t i - cal f re- quency (Hz) Normal mode (H x V) Native mode (H x V) COM- PUTER / COMPO- NENT VID EO IN-1 ter- minal COM- PUTER /C O M - PONENT DV[...]

13. Spec ificatio ns WXGA60a 1280 x 800 49.70 59.81 1920 x 1200 1280 x 800 xxx WXGA60b 1360 x 768 47.71 60.02 1920 x 1085 1360 x 768 WXGA60c 1366 x 768 47.71 59.79 1920 x 1080 1366 x 768 xxx WXGA+6 0 1440 x 900 55.94 59.89 1920 x 1200 1440 x 900 xxx WXGA++60 1600 x 900 60.00 60.00 1920 x 1080 1600 x 900 SXGA60b 1280 x 960 60.00 60.00 1600 x 1200 12[...]

13. Spec ificatio ns 1080i60 (1 125i60) 5 1920 x 1080 33.75 60.00 1280 x 720 - xx 1080i50 (1 125i50) 5 1920 x 1080 28.13 50.00 1280 x 720 - xx 480p (525p) 5 720 x 480 31.47 59.94 1280 x 720 - xx 576p (625p) 5 720 x 576 31.25 50.00 1280 x 720 - xx 720p60 (750p60) 5 1280 x 720 45.00 60.00 1280 x 720 - xx 720p60 (750p50) 5 1280 x 720 37.50 50.00 1280 [...]

13. Spec ificatio ns MAC1 3 640 x 480 35.00 66.67 1066 x 800 640 x 480 x MAC1 6 832 x 624 49.72 74.55 4 1066 x 800 832 x 62 x MAC1 9 1024 x 768 60.24 75.02 1066 x 800 1024 x 768 HP75 1024 x 768 62.94 74.92 1066 x 800 1024 x 768 HP72 1280 x 1024 78.13 72.00 1000 x 800 1280 x 1024 SUN66a 1 152 x 900 61.85 66.00 1024 x 800 1 152 x 800 SUN76a 1 152 x 9[...]

13. Spec ificatio ns VGA75 640 x 480 37.50 75.00 1024 x 768 x VGA85 640 x 480 43.27 85.01 1024 x 768 SVGA56 800 x 600 35.16 56.25 1024 x 768 x SVGA60 800 x 600 37.88 60.32 1024 x 768 xxx SVGA72 800 x 600 48.08 72.19 1024 x 768 x SVGA75 800 x 600 46.88 75.00 1024 x 768 x SVGA85 800 x 600 53.67 85.06 1024 x 768 SVGA95 800 x 600 59.97 94.89 1024 x 768[...]

13. Spec ificatio ns 13.7 Speci fi c ation of RGB signals in each computer mode of the projector Important • Some computers aren’t comp atible with the projector . • The projector’s maximum re solution is 1920 x 1200 pixels (PHWU-81 B), 1280 x 800 pixels (PHWX- 81B), or 1024 x 768 pixels (PHXG-91B). It may not display images of higher reso[...]

13. Spec ificatio ns 13.8 Dimensions Overview 510 263 119 * 660 342 169 51 240 340 Holes for hanger (M4 Depth 10 : 4 places) 192 Ø 46.6 30 314 70 Image 13-1 * = factory defaults 13.9 Connectors SERIAL IN/OUT (D-SUB 9-pin) 5 1 1 5 6 9 Image 13-2 Pin No. Name I/O 1 -- 2T X D I N 3R X D OUT 4 -- 5 GND - 6 -- 7 -- 8 -- 9 -- COMPUTER/COMPON ENT VIDEO I[...]

13. Spec ificatio ns Pin No. Spe c 3 B(BLUE)/PB /CB 4 GND 5 GND 6 GND 7 GND 8 GND 9 DDC 5V 10 GND 11 GND 12 DDC Data 13 HD/CS 14 VD 15 DDC Clock COMPUTER/COMPON ENT VIDEO DVI-D IN (HDCP) (DVI-D 24-pin) 17 24 16 9 8 1 Image 13-4 Pin No. Spe c 1 TMDS DA T A 2- 2 TMDS DA T A 2+ 3 TMDS DA T A 2 Shield 4 - 5 - 6 DDC Clock 7 DDC Data 8 - 9 TMDS DA T A 1-[...]

13. Spec ificatio ns HDMI IN (HDMI conne ctor) 19 1 2 18 Image 13-5 Pin No. Spec 1T M D S D A T A 2 + 2 T M D SD A T A2S h i e l d 3T M D S D A T A 2 - 4T M D S D A T A 1 + 5 TMDS DA T A 1 Shield 6T M D S D A T A 1 - 7 TMDS DA T A 0+ 8 T M D SD A T A0S h i e l d 9T M D S D A T A 0 - 10 TMDS Clock+ 1 1 TMDS Clock Sh ield 12 TMDS Clock- 13 CED 14 - 1[...]

A. Option l ens H LENS 0.8-1.0, 2.8 -4.5 or 4.5-8.7 A. OPTION LE NS H LENS 0.8-1.0 , 2.8-4.5 OR 4.5-8.7 C AUTION : Lens m ount ing mus t be p erfo rmed by se rvi ce per sonnel . A.1 Lens moun ting procedure Prepar ation Check that the lens shift is at t he factory default position (or the lens shift res et position) bef ore mounting t he option len[...]

A. Option l ens H LENS 0.8-1.0, 2.8 -4.5 or 4.5-8. 7 (e ) ( f ) (g ) ( h ) O C Image A-3 Lens removal C Lens caps O Optional lens 5. While holding down the lock button (f), slightly turn the fi xed ring (g) countercloc kwise to release the lock. 6. While holding the lens to prevent it from falling, turn the fi xed ring (g) fully counterclock wise[...]

A. Option l ens H LENS 0.8-1.0, 2.8 -4.5 or 4.5-8.7 A.3 Check after mounting the lens Overview After replaci ng the lens, be sure t o check the following f or ensuring s afety . • Check that the connector for the zoom/focus motor is locked securely . • Check that no lead wires are caught in mechanical parts. Cautions after mounting • Do not t[...]

A. Option l ens H LENS 0.8-1.0, 2.8 -4.5 or 4.5-8. 7 I Fornt proj ection II Front project ion, ceiling mou nted A Maximum projecti on area C Center of the lens XGA model with H LENS 0.8-1.0 The numbers are approximate and may be slightly diff erent from the actual measurements. Screen size (4:3) Projector distance ( L) Lens shift height 9 Lens shif[...]

A. Option l ens H LENS 0.8-1.0, 2.8 -4.5 or 4.5-8.7 250 635 212 538 132 337 165 4.2 206 5.2 65 164 24 62 20 52 300 762 254 646 159 404 198 5.0 248 6.3 77 197 29 75 25 62 A.6 Speci fi cations H LENS 2.8-4.5 Gene ral F No. : F2.2-2.7 Fo cal d is t anc e : f=40 . 7- 65. 1 mm Zoom/focus : el ectrical drive H0 H0 W1 H1 H2 H L W1 W L W1 H1 H2 H L W1 W L[...]

A. Option l ens H LENS 0.8-1.0, 2.8 -4.5 or 4.5-8. 7 Screen size (16:10) Projector distance (L) Lens shift height 9 Lens s hift widt h Diagonal size Width (W) Height (H) Shortest (Wid e) Longest (T ele) Movement distance (H1) Movement distance (H2) Mov emen t distance (W1) 40 102 34 86 21 54 -- 159 4.0 10 25 5 12 3 9 60 152 51 129 32 81 147 3.7 241[...]

A. Option l ens H LENS 0.8-1.0, 2.8 -4.5 or 4.5-8.7 H0 H0 W1 H1 H2 H L W1 W L W1 H1 H2 H L W1 W L C C A A II I Image A-7 I Fornt proj ection II Front project ion, ceiling mou nted A Maximum projecti on area C Center of the lens XGA model with H LENS 4.5-8.7 The numbers are approximate and may be slightly differ ent from the actual measurements. Scr[...]

A. Option l ens H LENS 0.8-1.0, 2.8 -4.5 or 4.5-8. 7 WUXGA model with H LENS 4.5- 8.7 The numbers are approximate and may be slightly diff erent from the actual measurements. Screen size (16:10) Projector distance (L) Lens shift height 9 Lens s hift widt h Diagonal size Width (W) Height (H) Shorter (Wid e) Longest (T ele) Movement distance (H1) Mov[...]

B. Op tional len s H LENS 1 .3-1.8 B. OPTIONAL LENS H L ENS 1.3-1.8 C AUTION : Lens m ount ing mus t be p erfo rmed by se rvi ce per sonnel . B.1 Lens moun ting procedure Prepar ation Be sure to turn off the projector and unplug the power cord from the wall outlet before mounting the option lens. When you have any inquiries, contact your dealer . H[...]

B. Opti ona l lens H LENS 1. 3-1.8 Cautions after mounting • Do not transport the projector with t he option lens mounted. The projector may be damaged. • With the option lens mounted, the br ightness, resoluti on, and color uniformity in the projected image m ay differ from those with the standard lens. • With the option lens mounted, the ad[...]

B. Op tional len s H LENS 1 .3-1.8 Screen size ( 4:3) Projector distance (L) Lens shift height 9 Lens shif t widt h Diagonal size Width (W) Height (H) Shortest (Wid e) Longest (T ele) Movement distance (H1) Movement distance (H2) Mov emen t distance (W1) 200 508 160 406 120 305 219 5.6 300 7.6 60 152 1 1 28 16 41 250 635 200 508 150 381 275 7.0 -- [...]

B. Opti ona l lens H LENS 1. 3-1.8 H0 H0 W1 H1 H2 H L W1 W L W1 H1 H2 H L W1 W L C C A A II I Image B-3 XGA model with H LENS 2.2-2.7 The numbers are approximate and may be slightly diff erent from the actual measurement s. Screen size ( 4:3) Projector distance (L) Lens shift height 9 Lens shif t widt h Diagonal size Widt h ( W) 10 Height ( H) Shor[...]

B. Op tional len s H LENS 1 .3-1.8 WUXGA model with H LENS 1.3- 1.8 The numbers are approximate and may be slightly diff erent from the actual measurements. Screen size (16:10) Projector distance (L) Lens shift height 9 Lens s hift widt h Diagonal size Widt h ( W) 10 Height ( H) Shortest (Wid e) Longest (T ele) Movement distance (H1) Movement dista[...]

B. Opti ona l lens H LENS 1. 3-1.8 132 R5905597 PHXX SERIES 28/01/2014[...]

C. Environ mental inf ormation C. ENVIRONMENT AL INFORMA TION C.1 D ispo sa l inf orm atio n Disposal Information W aste Electrical and Electr onic Equipment This symbol on the product indicates that, un der the European Directive 2012/19/EU governing waste from electrical and electronic equipment, this product mus t not be di sposed of with other [...]

C. Envi ronm ent al inf orm ation 有毒有害物 质 或元 素 部件名称 铅 (Pb) 汞 (H g) 镉 (Cd) 六价 铬 (Cr(VI)) 多 溴联 苯 (P BB) 多 溴 二苯 醚 (PBDE) 实 装基板 x ooooo 框架 x ooooo 光学 单 元 xx oooo 遥控器 x ooooo 电缆类 x ooooo 灯泡 xx oooo 备 注（ ○ 或 × 的表示意思） ○ : 表示 该 有毒?[...]

Glos sary GLOSSAR Y Default Gateway A server (or router) to communicate across networks (subnets) that are di vided by Subnet Mask. DHCP Abbreviation for Dynam ic Host Co n fi guration Protocol. This protocol automatically assigns I P Address to networked devices. IP Address Numerical address to identify networked computers. MAC Address Abbreviati[...]

Glos sary 136 R5905597 PHXX SERIES 28/01/2014[...]

Index INDEX A Accessories 1 1 Adjustments 55–58, 60–64 , 66–70, 72–73 Aspect ratio 58, 60 Detailed setti ng 60 Auto power off 72 Brightness 55 Color 55 Color enhancer 56 Color matrix 57 Color temperature 55 Color tone 57 Color variations 66 Computer image 62–63 Via menu 63 Contrast 55 Cornerstone 69 Curved mode 70 Distorted image 68 Finen[...]

Index I Image menu 42 Advanced me nu 42 Image position 64 Si mple me t hod 64 Image reverse 72 Information menu 52 Advanced me nu 52 Installation 14, 20 Bat ter ie s 14 Remote control 14 Distorted image 20 Fine streaks 20 Skewed image 20 Installa tion 1 4 4 Advanced me nu 44 Installa tion 2 4 5 Advanced me nu 45 IP address 78 IP con fi g7 9 Save 7[...]

Index Screen size 17 Projector name 75 R Remote control 14–15, 29 Bat ter ie s 14 Installation 14 Indications 29 Basi c 29 Use 15 S Safety 5–7 Instruct ions 6 Mercury vapor warnings 7 Ultraviolet radiation 7 UV radiation 7 Screen 17 Set up 17 Screen size 17, 58 Projector distance 17 Settings 67 Reset 67 Setup 17 Ceiling m ount holes 17 Screen 1[...]