Belling SCGHU60GC manual

1.364 Belling SCGHU60GC / SCGHU70GC Built-in Gas Hobs UK 082761100 09/01/2013 Users Guide & Installation Handbook[...]

CONTENTS & INTRODUCTION 3.000 CONTENTS • SAFET Y • USING THE PRODUCT • CLEANING • INST ALL A TION INSTRUCTIONS • TECHNICAL DA T A • CUSTOMER CARE INTRODUCTION Thank you for buying this British- built appliance from us. This guide book is designed to help you through each step of owning your new cooker , from installation to use. Ple[...]

SAFETY 5.142 WARNING! - This appliance and its accessible parts may become hot during use. T o a void burns, children less than 8 years of age shall be kept aw ay unless continuously supervised. This appliance can be used by children aged from 8 y ears and above and persons with re- duced physical, sensory or mental capabilities or lack of experien[...]

SAFETY 5.142 General Servicing should be carried out only by authorised personnel. Do not spray aer osols in the vicinity of this appliance while it is in operation. Do not store or use ammable liquids or items in the vicinity of this appliance. Do not modify this appliance. • Always ensure that pan bases are dry , stable and at before usin[...]

SAFETY 5.142 Avoiding damage to the appliance. Objects that melt and things that boil over can burn onto the hob and should be removed as soon as possible. T o avoid damage to cookware do not al- low sauce pans or frying pans to boil dry . Do not use the cooking zones with empty cookware or without cookware in place. CAUTION: The use of a gas cooki[...]

6.000 USING THE HOB - GAS • If your hob is supplied with left and right handed pan supports, ensure that they are located over the align- ment pins and are sitting at on the hob. • Use pans which are large enough to avoid ov erows onto the hob surface. • Wipe any spillage as soon as pos- sible. • Clean the hob top as regularly as poss[...]

USING THE HOB - GAS 6.000 FOLD DOWN LID (IF FITTED) Caution: Glass lids may shatter when heated. T urn off all the burners before shutting the lid. When opening and closing the lid, use the cooler outer sides of the lid glass. The lid must be opened fully , so there is no danger of it closing while the hob is being used. Appliances tted with gla[...]

CLEANING 12.000 General • It is important to clean the product regularly as a build up of fat can af - fect its performance or damage it and may inv alidate your guarantee. • Always switch off y our appliance and allow it to cool down before you clean any part of it. • Do not use undiluted bleaches, products containing chlorides, wire wool or[...]

CLEANING 12.200 GAS HOB Burner caps and heads • The slots in the burner head where the ames burn should be cleared of deposits. • Clean with a nylon brush, rinse and then dry thoroughly . There may be brown coloured markings on your burners; these are carbon deposits or fat stains and can be remov ed using a soap lled pad. • Do not put [...]

INSTALLATION 13.300 Installation This appliance must be installed in accordance with the regulations in force, and only in a well ventilated space. Read the instructions bef ore using or installing this appliance. This appliance is factory set for use with natural gas only . Regulations & Standards Prior to installation, ensure that the local d[...]

INSTALLATION 13.300 Ventilation Requirements The room containing the appliance should have an air supply in accor dance with BS5440: Part 2 • All rooms require an openable window , or equivalent, and some rooms will require a permanent vent as well. • For r oom volumes up to 5m3 an air vent of 100cm2 is required. • If the room has a door that[...]

INSTALLATION 13.300 Clearances & dimensions The room should have good light and ventilation but be free from dr aughts. The worktop should be at least 600mm deep, & 30mm thick to enable the cutout to be made to the dimensions shown below . A minimum distance of 40mm should be maintained between the hob and rear wall / combustible surface. A[...]

INSTALLATION 13.300 Important Information It is important when installing front control gas hobs, that the work top cut out is the same as is quoted in this installation manual. If the cut out is too large, then batons must be tted to the front, rear and sides - to correct the discrepancy and ensure the correct t. Please ensure that if batons[...]

INSTALLATION 13.300 Fit the hob into the cutout & secure to worktop Place the hob into the cutout and secure in place using the four br ackets and screws provided. The brackets should be orientated to suit the worktop thickness as shown, then inserted into the four slots (two on the front edge and two on the rear) and screwed into the underside[...]

INSTALLATION 13.300 Alternative clamp positions If the front and rear clamp positions are problematic, alternative positions can be used on the sides of the hob, dependant on the particular installation. These positions will require clearance from any cabinet sides and ma y effect how tightly the hob will meet the worktop. Stone (Granite or equival[...]

INSTALLATION 13.300 Connect gas hob to gas supply The inlet is at the rear RHS of the hob. The hob may be connected to the gas supply either by rigid pipework or exible connection. Flexible connections Use a 900mm - 1125mm length of exible connector . Ensure that the hose is installed hanging freely downwar ds, is not trapped, is not subjecte[...]

INSTALLATION 13.300 Connect to the electricity supply For hobs that ar e supplied/manufactured with a 13Amp supply cord and plug only . W arning: Ensure that the power rating of the appliance is compatible with a 13Amp supply beore connecting to the electricity supply . i.e. 2.8kW . Warning: This appliance must be earthed. The exible mains lead [...]

INSTALLATION 13.300 Troubleshooting Before you call Customer Care, please check the following points: Burner fails to ignite: • Check the electricity supply is on. • Check the fuse. There is a spark to the burner but it fails to ignite: • Check that the ame holes in the ame spreader are clear of water or deposits. • Check that the gas[...]

14.335 TECHNICAL DATA This information is for the following appliances: Belling Hobs SCGHU60GC / SCGHU70GC - NG only Data badge Underside of the hob base Electrical supply 220 - 240V ~ 50Hz 1W Ignition Mains repetitive ignition. Gas connection The inlet connection is at the rear right- hand side - ISO7 - Rp1/2” (1/2” BSP) Appliance Class Class [...]

CUSTOMER CARE 15.030 CUSTOMER CARE WEB SHOP Having purchased a superior cooker , hob or hood from us, you’ll naturally want to keep it looking great. And who better to help you care for it than the manuf ac- turer? W e offer an extensive r ange of accesso- ries, components and cleaning products which, will instantly give your cooker a good as new[...]

Please keep this handbook for f uture reference, or for an yone else who may use the appliance.[...]

Please keep this handbook for f uture reference, or for an yone else who may use the appliance.[...]

Please keep this handbook for f uture reference, or for an yone else who may use the appliance.[...]

17 .010 CUSTOMER CARE T o contact Belling about your appliance, please call Warranty Registration 0844 481 0182 to register your appliance Customer Care Helpline 0844 815 3746 in case of difculty within the UK Alternatively general, spar es and service information is available f rom our website at www.belling.co.uk Please ensure that you hav e t[...]