Bosch Appliances 700 manual

Divar 700 Series Digital Hybrid HD Recorder / Digital Network HD Recorder en Installation and Operation manual[...]

[...]

Divar 700 Series Table of Cont ents | en 3 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 T able of Contents 1S a f e t y 7 1.1 Safety precautions 7 1.2 Important safety instructions 7 1.3 Important Notices 9 1.4 FCC and UL 11 1.5 Bosch notices 12 2 Introduction 13 2.1 Digital video record er for surveillan[...]

4 en | Table of Cont ents Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 4.9 Keyboard connections 31 4.10 Ethernet connection(s) 32 4.11 RS485 port 32 4.12 Biphase port 33 4.13 USB connectors 35 4.14 External alarm I/O connection 35 4.15 Malfunction relay 37 4.16 Power supply 38 4.17 Mainte[...]

Divar 700 Series Table of Cont ents | en 5 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.1.3 Time Server 67 6.2 Video & Audio 68 6.2.1 Analog Channels 68 6.2.2 IP Channels 69 6.2.3 Bitrates tab 72 6.3 Schedule 74 6.3.1 Setting the dynamic characteristics 74 6.3.2 Schedule 74 6.3.3 Exceptions 75 6.4 R[...]

6 en | Table of Cont ents Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.12.1 Service 103 6.12.2 KBD 103 6.12.3 Serial ports 104 6.12.4 Licenses 105 6.12.5 Logging 105 7 Menu default values 106 7.1 Quick install menu defaults 106 7.2 Monitor view settings defaults 107 7.3 Configuration me[...]

Divar 700 Series Saf ety | en 7 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 1S a f e t y 1.1 Safety precautions 1.2 Impor tant safety instructions Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before[...]

8 en | Safety Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 9. Power supply cord and plug p rotection - Protect the power supp ly cord and plug from foot traffic, being pinched by items placed upon or against them at electrical outlets, and its exit from the unit. For units intended to ope[...]

Divar 700 Series Saf ety | en 9 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 1.3 Impor tant Notice s All-pole power switch - Incorporate an all-pole power switch, with a contact separation of at least 3 mm in each pole, into the electrical insta llation of the building.If it is needed to open the housing [...]

10 en | Safety Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems NOTE: Wear required grounded wrist straps and observe proper ESD safety precautions when handling the electrostatic-sensi tive printed circuit boards. Fuse rating - For protection of the device , the branch circuit protecti on mu[...]

Divar 700 Series Saf ety | en 11 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 1.4 FCC and UL FCC & ICES Information (U.S.A. and Canadian Models Only) This equipment has been test ed and foun d to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules . These limits a[...]

12 en | Safety Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems et résoudre les problèmes d’interfér ences de radio et de télévision) . Cette brochure est disponible auprès du U.S. Government Printi ng Office, Washington, DC 20402, États-Unis, sous la référence n° 004-000-00345 -4[...]

Divar 700 Series Introduction | en 13 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 2 Introduction 2.1 Digital video recorder for sur veillance applications The Divar 700 Series is a video recording system that records multiple camera signals while simultaneously providing live mu ltiscreen viewing and pla[...]

14 en | Introduction Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Hybrid verions (DHR) The DHR hybrid versions have lo oping auto-terminating analog video inputs and outputs, and audio inputs and outputs. Two VGA connectors provide outputs for an A and a B monitor. Monitor A displays full[...]

Divar 700 Series Introduction | en 15 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 2.1.5 Features The Divar 700 Series has the following features: – 8 or 16 looped-through, auto-termin ating camera inputs (hybrid versio ns) – 8 or 16 audio inputs (hybrid versio ns) – Audio support for IP cameras –[...]

16 en | Introduction Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems – A 25-pin D-type switching and alarm connector board – A 15-pin D-type connector board (used for Biphase PTZ conne ctions) – A 3-pin screw terminal connector (used for RS485 PTZ connection) – Power supply cord – [...]

Divar 700 Series Introduction | en 17 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 2.3 Installation environment 2.3.1 Mounting The Divar 700 Series is supplied as a desktop unit. If desired, the unit can be rack mounted using the rack mounting kit supplied with the unit. 2.3.2 Ventilation Ensure that the [...]

18 en | Quick install Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 3 Quick install To get the unit quickl y operational, make the connections describe d below and then enter the relevant data in the Quick install menu. The Quick install menu appears the first time the unit is started. Whe[...]

Divar 700 Series Quick install | en 19 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 3.2 First-time use The unit first determines if camera inputs are PAL or NTSC and selects the output mode for the monitor. If only IP cameras are connected, th e system defaults to PAL. The unit starts with a multiscreen d[...]

20 en | Quick install Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 3.3 Quick install menu The Quick install menu contains four tabs: In ternational, Network, Schedule, and Recording. Navigate through these tabs using Back and Next . Clic k Undo to cancel change s made in the active tab. C[...]

Divar 700 Series Quick install | en 21 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 3.3.2 Schedule Figure 3. 3 Quick install menu - Sche dule The currently active we ekly schedule is shown. Each color repres ents an available profile: – Yellow - Profile 1 – Dark blue - Profile 2 – Green - Profile 3 [...]

22 en | Quick install Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 3.3.3 Recording Figure 3. 4 Quick in stall me nu - Recordi ng Set the Normal recording Resolution, Quality, an d Frame rate for each pr ofile in the table. Set the Alarm and Motion recording Resolution, Qual ity, and Frame[...]

Divar 700 Series Quick install | en 23 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 3.3.4 Network Figure 3. 5 Quick install menu - Network Fill in the settings that control the behavior of the unit with respect to a network. DVR name — Enter a unique DVR name to be used in the network. DHCP — Enable D[...]

24 en | Hardware setup Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 4 Hardware setup This chapter contains detailed in formation about the hardware in stallation and connection of external equipment to the unit. The connector ty pes and their pin signals are described. Most of the connect[...]

Divar 700 Series Hard ware se tup | en 25 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 4.3 Hard disk installation Up to four hard disks can be in stalled in the DVR. All hard disks are accessed from the front of the unit by removing the front panel. Do not op en the top cover or attempt to service the uni[...]

26 en | Hardware setup Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Placing a hard disk Figure 4. 4 Placing a hard disk 1. Locate the first empty hard disk bay. It is recommended to install the disks in order from one to four, as labeled. (Note that disk s 3 and 4 are mo unted in a double[...]

Divar 700 Series Hard ware se tup | en 27 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 4.4 Camera connections On hybrid units, co nnect cameras to the Video in connectors on the back of the unit using 75 ohm video coaxial cables with BNC connectors . Optionally, this signal can be looped through to other [...]

28 en | Hardware setup Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 4.5 Audio connections (h ybrid version only) The unit supports up to 16 audi o inputs and 4 audio outputs. Connect using audio cable with RCA compatible connectors. Specifications Input signal: Mono RCA, 1 Vpp, 10k ohm Ou[...]

Divar 700 Series Hard ware se tup | en 29 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 4.6.2 CVBS Connect the unit to CCTV monitors using 75 ohm video coaxial cables with BNC connectors. The unit provides a 1 Vpp CVBS signal. If the monitor has a loop-through connection w ithout using the loop-through out[...]

30 en | Hardware setup Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 4.8 RS232 COM port connections The RS232 COM ports are used to connect a PC to th e unit for service purposes. Use a null- modem cable to connect the serial port of the PC to the unit. The Baud rate can be selected in the[...]

Divar 700 Series Hard ware se tup | en 31 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 4.9 K eyboard connections The keyboard input and output co nnectors are used to connect a Bosch Intuikey keyboar d to one or more units. For one unit , connect the keyboard to the KBD in connector. For more units, conne[...]

32 en | Hardware setup Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Ta b l e 4 . 3 Ke yboard out - RJ11 socket (KBD out) 4.10 Ethernet connection(s) The standard RJ-45 Ethernet socket is used to co nnect the unit directly to a PC, IP camera, or to a network. To connect to a network hub or[...]

Divar 700 Series Hard ware se tup | en 33 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Figure 4.15 RS485 connector Ta b l e 4 . 5 RS485 pin definition The recommended cable diameter is AWG 28-16 (0.08-1.5 mm 2 ). To communicate with the controllable camera, sel ect a port number that is the same as the in[...]

34 en | Hardware setup Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Figure 4.16 Biphase por t connector and connection board Ta b l e 4 . 6 Control port - 15-pole D-type sock et To communicate with the controllable camera, sel ect a port number that is the same as the input number to whic[...]

Divar 700 Series Hard ware se tup | en 35 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 4.13 USB connectors Four USB connectors are located at the rear pane l of the unit. For convenience, one USB port is located on the front of the unit to connect a mouse or memory device. Figure 4.17 USB ports 4.14 Exter[...]

36 en | Hardware setup Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Figure 4.18 External alarm input and output connect or and connection board 1A 1B 2A 2B R E L A Y 3A 3B 4A 4B GND 1 2 GND 9 10 3 4 GND 11 12 5 6 GND 13 14 7 8 15 16 IN IN IN IN 13 1 14 25 AL ARM I/O[...]

Divar 700 Series Hard ware se tup | en 37 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Ta b l e 4 . 8 External I/O - 25-pole D- type sock et 4.15 Malfunction rela y The malfunction relay will be activated upon critical system errors such as, high temperatures inside the unit, excessive voltages, missing d[...]

38 en | Hardware setup Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 4.16 Po wer supply Power is supplied to the unit via the IEC-style socket. For security reason s, the unit has no on/ off switch. This means that the unit is always powered as long as th e power cable from the unit is con[...]

Divar 700 Series Operating instructions | en 39 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 5 Operating instru ctions These instructions explain the purpose of the fr ont panel keys. The functions available can be limited by se tting password s. Some functions may also require a sof tware license. An adm[...]

40 en | Operating instructions Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems OSD key – press to view date/time and camera information, date/time only, or none Search key – press to open the date/time search menu to look for r ecorded images PTZ key – enables either pan/tilt or pan/zo[...]

Divar 700 Series Operating instructions | en 41 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Stop key – while in playback mode, press to return to live mode Note: IP camera numbering starts at 9 on an 8-channel hybrid model and at 17 on a 16-channel hybrid model. So on a 16-channel hybrid unit with IP c[...]

42 en | Operating instructions Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 5.3 V iewing picture s The hybrid version has two monitor outputs, A and B. The way in which these monitors display pictures depends on how the system is config ured. When an alarm or motion input is detected, the[...]

Divar 700 Series Operating instructions | en 43 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Multiscreen To view different multiscreen displays on monito r A or B: 1. Press the multiscreen key. – A multiscreen display of camera pi ctures appears on the active monitor. – The camera keys of the selected[...]

44 en | Operating instructions Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Zoom To zoom in on a video image: 1. Press the zoom key. – The picture is enlarged by a factor of 2. 2. Use the arrow keys to select the ar ea of the picture to be displayed. 3. Press the zoom key again to zoom [...]

Divar 700 Series Operating instructions | en 45 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 5.5 Over view of the menu syst em The menu gives access to several f unctions to he lp use the unit. Access to s ome menu items is password protected. There are three ways of accessing the menu system: – via the[...]

46 en | Operating instructions Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems System information The System information menu contains two submenus: – Status - opens a menu to view status information. – Log Book - opens a menu to view the system log. Help The Help function displays a hel[...]

Divar 700 Series Operating instructions | en 47 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 5.6 Search Figure 5. 5 To p m e n u - S e a r c h 1. To search, enter the top menu and click Search . 2. Choose Date/time search or event or text search from the pull-down menu. Alternatively, press the search key[...]

48 en | Operating instructions Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 5.6.2 Search Events search criteria Figure 5. 7 Searc h menu - Event s –U n d e r Start time and End time , fill in date and time values to determine the time span of the search. – To set the Search direction [...]

Divar 700 Series Operating instructions | en 49 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Smart motion search criteria Figure 5. 8 Search menu - Smart motion 1. Set the smart motion sear ch parameters as follows: –U n d e r Start time and End time , fill in date and time values to determine the time [...]

50 en | Operating instructions Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Text search criteria Figure 5. 9 Searc h menu - T e xt data –U n d e r Start time and End time , fill in date and time values to determine the time span of the search. – To set the Search direction , select Fo[...]

Divar 700 Series Operating instructions | en 51 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Search results Figure 5.10 Search menu - Search results – The recording fitting the filt er and closest to the selecte d date and time is shown first. – Use the up/down arrow keys to move through the list. The[...]

52 en | Operating instructions Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 5.7 Expor t and local playback Figure 5.11 T op menu - Expor t video The export menu is accessed from the top menu. It allows writing segments of recorded vide o and audio to a USB storage device or recordable DVD[...]

Divar 700 Series Operating instructions | en 53 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 – To change a video segment in the list, select it and click Change . – To remove a video segment from the list, select it and click Remove . The archive list is saved until archiving is carr ied out. Video se[...]

54 en | Operating instructions Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 5.8 Configuration Figure 5.14 T op menu - Conf iguration The Configuration menu is accesse d from the top menu. The Configuration me nu contains three submenus: – Quick Installation - opens a wizard to config ur[...]

Divar 700 Series Operating instructions | en 55 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Sequence Figure 5.15 Configure monitors menu - Seq uence Select the length of time a camera remains visible on screen (1 to 60 seconds) in the Sequence dwell time field. Use the the Add button to move camera input[...]

56 en | Operating instructions Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Event display Figure 5.16 Configure monitors menu - Event displa y Select the way events are disp layed on both monitor A and B. Check the Contact inputs events , Motion detection events, Text events or Video loss[...]

Divar 700 Series Operating instructions | en 57 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Text display Figure 5.17 Configure monitors menu - T ext display Select the way text events are di splayed on both monitor A and B. –E n a b l e Show text data to see a text data ov erlay on the monitor. – Sel[...]

58 en | Operating instructions Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 5.9 System inf ormation Figure 5.18 T op menu - Syst em information The System information menu is accessed from the top menu. The System information menu contains two submenus: – Status - opens a menu to view s[...]

Divar 700 Series Operating instructions | en 59 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 – Earliest recording - displays date and time of the earliest (oldest) recording on disk. – Latest recording - displays date and time of the latest (newes t) recording on disk. – Total Disk Size - displays t[...]

60 en | Operating instructions Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Ta b l e 5 . 2 Po wer supply lev els Voltage level Lower limit Upper limit 12 Volt 10.8 V 13.2 V 5 Volt 4.7 V 5.3 V 3.3 Volt 3.1 V 3.5 V[...]

Divar 700 Series Operating instructions | en 61 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 5.9.2 Logbook The logbook menu is used to display a filtered history of system events. Logbook filter Set various filter criteria to search in a spec ified time period f or various system events. Figure 5.20 Log b[...]

62 en | Operating instructions Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 5.10 Event handling Various types of events chan ge the way the unit works. These events are: – a contact input signal applied to the unit; – motion detection in a camera signal; – a loss of video from one o[...]

Divar 700 Series Operating instructions | en 63 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 5.10.2 Contact inputs If a contact input causes an alarm – Monitors A and B (hybrid versio n only) can display an array of pre-selected cameras. – Monitor A: The bo rder around the displayed ca meos is red. Th[...]

64 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6 Advanced configuration Access all the parameters that are used to configure the unit vi a the configuration menu item of the top menu. The large number of paramete rs available gives the opportunity to prog ram [...]

Divar 700 Series Advanced configuration | en 65 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.1 International 6.1.1 Language Figure 6. 1 Configuration menu - International - Language – Select your Language from the drop-down list. – Select the preferred Temperature unit . Users General Administrator [...]

66 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.1.2 Time/date Figure 6. 2 Configuration menu - International - Time/date – Select a Time zone from the list (daylight saving time is adjusted accordingly). – Select either a 12-hour or a 24-hour clock Time f[...]

Divar 700 Series Advanced configuration | en 67 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 recordings, the clock resumes advancing at the normal pace and normal recording behaviour is resumed. If you want the recorder to set back the clock mo re than 10 minutes, but also want the unit to resume recordin[...]

68 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.2 V ideo & Audio Use this menu to configure the video and audio inputs. On DHR 730 models tabs 1-8 are for the analog cameras. Higher tabs are f or IP cameras. On DHR 750 models tabs 1-16 are for the analog [...]

Divar 700 Series Advanced configuration | en 69 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Control tab – Enable PTZ when a controllable camera is connected. By default, PTZ is disabled. – Select protocol and device address on PTZ bus. (PTZ commands are transmitted across the RS485 and Biphase bus si[...]

70 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Manual setup Figure 6. 6 Configuration menu - V ideo & Audio - IP camera manual setup 1. Click Manual setup ... to configure or change an IP camera connection. – IP address - enter the IP address of the I P [...]

Divar 700 Series Advanced configuration | en 71 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Auto detect Figure 6. 7 Configuration menu - V ideo & Audio - IP camera - Auto det ect Click Auto detect ... to assign a detected IP camera to the selected channel. Select Configure ... to change the IP parame[...]

72 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.2.3 Bitrates tab Units with IP channels have a Bitrates tab for allocating the total available IP bandwidth to the individual cameras. DHR models with 8 or 16 IP channels have 36 Mbit/s total bandwidth available[...]

Divar 700 Series Advanced configuration | en 73 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 panel. This causes the bitrate for the camera to be lower than the value set in the recording profiles. – No Bitstream when the camera can not stream video data due to bitrate limitations. If the total required [...]

74 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.3 Schedule 6.3.1 Setting the dynamic ch aracteristics The settings in the Sc hedule menu provide the opportunity to tap the powerful functionality of the unit. By planning and setting up the pr ofiles available,[...]

Divar 700 Series Advanced configuration | en 75 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.3.3 Exceptions – Up to 32 exceptions can be set that override the schedule. – To add an exception, select Add . Enter the Date , Time, Durati on , and the Profile . – To edit an exception, select it and cl[...]

76 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.4 Recording Use the Recording menu to configure the recording set -up for each of the six profiles. Note: The audio/video settings in a prof ile also apply to the stream used for remote live viewing. Figure 6.10[...]

Divar 700 Series Advanced configuration | en 77 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 –R e s o l u t i o n : – for analog cameras, set the video resolu tion to 4CIF (704 x 576/480 PAL/NTSC), 2CIF (704 x 288/240 PAL/NTSC), or CIF (3 52 x 288/240 PAL/NTSC). – for IP cameras, set the video reso [...]

78 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Note: If Event only recording has been selected under the No rmal tab, then the pre-event time also applies for contact, motion and text recordings. 6.4.5 Copy The copy recording settings function makes it ea sy t[...]

Divar 700 Series Advanced configuration | en 79 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.5 Contacts Use the Contacts menu to set up alarm inputs and relay outputs. Figure 6.11 Configuration menu - Contacts 6.5.1 Contact inputs By default, all contact Inputs are Normally Op en (NO). When needed, high[...]

80 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems – No override (default) – Follows : the profile override lasts for as long as the input is active (no override duration can be set). – Fixed duration : the profile override starts when th e input becomes act[...]

Divar 700 Series Advanced configuration | en 81 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.6 Motion 6.6.1 Motion detection on analog cameras The motion detection feature is configured by selecting the tab s for each individual analog video input. Figure 6.12 Configuration menu - Motion on analog camer[...]

82 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Note: Tips for troublefree motion d etection: – The size of a motion area influe nces the sen sitivity in this area. A small motion area should be used to detect small objects (high sensitivity); a large area sh[...]

Divar 700 Series Advanced configuration | en 83 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.6.2 Motion detection on IP cameras With IP cameras there are two ways of performing motion detection: –i n t h e c a m e r a , o r – in the recorder. Figure 6.13 Configuration menu - Motion on IP cameras To [...]

84 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.7 T ext data 6.7.1 Bridge Bridges or terminals for supplyin g text data are configured here. Figure 6.14 Configuration menu - Bridge te xt data – Port : enter the port for the bridge device. – Add bridge : c[...]

Divar 700 Series Advanced configuration | en 85 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Figure 6.15 Configuration menu - DirectIP te xt da ta DirectIP allows external systems to send text data to the Divar unit for recording with one or more cameras. Click Add to define a new source system sending te[...]

86 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.8 Event Use the Event menu to specify the desired behavior for an active contact input, detected motion, or video loss. The general behavior of even ts is also set here. Each of the six profiles has a General , [...]

Divar 700 Series Advanced configuration | en 87 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.8.2 Contact The event behavior can be co nfigured for each of the 16 input contacts in turn. – Check the Enabled box if the input contact should activate an event. – Check the Alarm box if the input contact [...]

88 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.8.5 Video loss The event behavior for video loss signals can be configured for each video channel in turn. – Check the Enabled box for each video channel if video loss should activate an event. 6.8.6 Copy The [...]

Divar 700 Series Advanced configuration | en 89 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.9 Ne twork 6.9.1 Setup - Ge neral Figure 6.17 Configuration menu - Ne twork - Setup - G eneral – Enter a unique DVR name to be used on the network. –I f Discovery is e nabled, the unit can be automati cally [...]

90 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.9.2 Setup - Connection 1 Figure 6.18 Configuration men u - Network - Setup - Connection 1 Set up the network parameters for the primary Ethernet port. –E n a b l e DHCP to have IP address , subnet ma sk, and d[...]

Divar 700 Series Advanced configuration | en 91 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.9.3 Setup - Connection 2 Figure 6.19 Configuration menu - Ne twork - Setup - Connections Set up the network parameters fo r the secondary Ethern et port. –E n a b l e DHCP to have IP address, subnet mask, and [...]

92 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.9.4 IP Range Figure 6.20 Configuration men u - Network - IP range – Eight IP ranges can be entered to allow access. – Enter the same begin and end address to sp ecify a s ingle IP address. Enter different be[...]

Divar 700 Series Advanced configuration | en 93 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.9.5 Monitor Streaming The remote monitor streaming function, which is only available on hybrid units, allows monitor output A and/or B to be streamed re motely via one or more of the analog video inputs. Figure [...]

94 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.9.6 SNMP Figure 6.22 Configuration menu - Network - SNMP SNMP –E n a b l e SNMP to activate SNMP. – Community - fill in the SNMP authentication string. – System contact - fill in the contact d ata of the a[...]

Divar 700 Series Advanced configuration | en 95 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Traps Figure 6.23 Configuration menu - Ne twork - SNMP - T raps Traps –E n a b l e Traps to allow traps to be sent. – Select the traps to send: Coldboot , Tempera ture alarms, Power supply alarms, Video loss e[...]

96 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.10 St orage The Storage menu gives access to in formation on the hard disk(s) and iSCSI storage LUNs. Figure 6.24 Configuration menu - Storage - Disk set 6.10.1 Disk set A disk set consists of 1 or more disk dri[...]

Divar 700 Series Advanced configuration | en 97 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 RAID 4 is active, the storage available for vide o record ing is equal to three times the size of the smallest disk in the set. Th e four th disk is used for pa rity information. If a single disk fails, no data is[...]

98 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Figure 6.26 Confi guration menu - Storage - Disks - All All disks All available disks are shown in the list. – Select Internal disks to see a list of installed inte rnal disks and their capacity in gigabytes. ?[...]

Divar 700 Series Advanced configuration | en 99 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 2. Add the replacement drive to the active disk set in the Disks / All tab. The recorder shows a reminder that any video on the replacement drive will be lost if the drive is added to the set. 3. Click OK to proce[...]

100 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.11 Users 6.11.1 General – Set a default user. This user is logged on to the unit by default on power up. 6.11.2 Administrator Figure 6.27 Configuration men u - Users - Administrato r –E n t e r a Us er name[...]

Divar 700 Series Advanced configuration | en 101 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.11.3 Users 1 - 7 Figure 6.28 Configuration menu - Users - User 1 access rights The access rights for up to seven users can be defined with the se ven tabs. –E n t e r a Us er name , up to 16 characters. –E [...]

102 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Figure 6.29 Configuration men u - Users - User 1 control rights In the Control rights tab, set the rights for camera viewing, camera control, camera pre- positioning, and relay control.[...]

Divar 700 Series Advanced configuration | en 103 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.12 Syst em 6.12.1 Service – Select Restore factory defaults to reset the settings in the menu system to their default value. (Refer to Section 7 Menu default values for a list of default values.) – Export d[...]

104 en | Advanced configuration Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 6.12.3 Serial ports Figure 6.31 Configuration menu - System - Serial ports COM port The COM port is used for service or inte gration purposes. Set up the communication parameters required. RS485 port The COM port[...]

Divar 700 Series Advanced configuration | en 105 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 6.12.4 Licenses Figure 6.32 Configuration menu - System - L icenses Some optional features require a software license to be obtai ned before they are activated. – MAC address displays the MAC address of the un [...]

106 en | Menu default values Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 7 Menu default values The following tables list the items of the menu system of the unit. The Defa ult value column shows the values that are restored when the factory defaults item of the System settings menu is se[...]

Divar 700 Series Menu default values | en 107 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 7.2 Monitor view set tings defaults Ta b l e 7 . 2 Monitor view set tings default values Navigation Setting Default value Reset Display options Monitor A Transparent background Enabled Y Cameo borders Black Y Click [...]

108 en | Menu default values Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 7.3 Conf iguration menu defaults Ta b l e 7 . 3 Configuration menu default values Navigation Setting Default value Reset International Language Language English N Temperature unit Celsius N Time/date Time zone GMT+1[...]

Divar 700 Series Menu default values | en 109 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Recording Profile 1-6 1...32 Normal Recording mode Continuous Y Pre-event time 30 seconds Y Resolution 4CIF Y Video quality Medium Y Frame rate 6.25 IPS Y Record audio Disabled Y Audio quality Medium Y 1...32 C onta[...]

110 en | Menu default values Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Text data Bridge Reco rder TCP port 4200 N List of bridges and terminals Empty N DirectIP List of direct IP connections Empty N Event Profile 1-6 General Auto acknowledge alarm s Disabled Y Alarm dwell time 10 secon[...]

Divar 700 Series Menu default values | en 111 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Network Setup General DVR Name Divar 700 Series N Discovery Enabled N Remote streaming limit 100 Mbps N HTTP port 80 N Connection 1 DHCP Enabled N Auto DNS address Enabled N Connection 2 DHCP Enabled N IP range Begi[...]

112 en | Menu default values Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Users General Default user Administrator Y Administrator User name Administrator Y Password Y Allow local log on Enabled NA Allow remote log on Enabled Y Auto log off Disabled Y User 1..7 Access rights User name Use[...]

Divar 700 Series Menu default values | en 113 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11[...]

114 en | T echnical specifications Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 8 T echnical specifications The following pages give the technical specifications of the unit. 8.1 Electrical Voltage and Power Video Audio Alarm Handling Input voltage 100-240 VAC; 0.7-0.3 A, 50/60 Hz Power c[...]

Divar 700 Series T echnical specifications | en 115 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 Control Connectors RS232 Output signals according to EIA/TIA-232-F, max input voltage ±25 V Keyboard in put Conform RS4 85 max signal voltage ±12 V, supply 11 V-12.6 V at max 400 mA Biphase Impedance 128 ohm[...]

116 en | T echnical specifications Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems Storage Display Modes 8.1.1 Mechanical 8.1.2 Environmental Hard Disks 4 front-replaceable SATA hard drives Record Rate (IPS) P AL: 400 total, config urable per camera: 25, 12.5, 6.2 5, 3.125, 1 NTSC: 480 total[...]

Divar 700 Series T echnical specifications | en 117 Bosch Security Systems Installation and Operation manual F .01U.246.471 | v3.6 | 2011.11 8.1.3 Electromagnetic and Safety 8.1.4 Video bitrates (Kbps) fo r analog and IP SD cameras Note: The above bitrates are theoretical values. In pr actice, the bitrates can be up to 50% lower depending on the ca[...]

118 en | T echnical specifications Divar 700 Series F .01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems 8.1.6 Accessories (Optional) Keyboard KBD-Digital / Universal - In tuikey keyboard with joystick Keyboard extension kit (LTC 8557) Keyboard port expander (LTC 2604) Storage 500GB, 1 TB or 2 T B storage expansi[...]

[...]

Bosch Security Systems Werner-von-S iemens-Ring 10 85630 Grasbrunn Germany www.boschsecurity.com © Bosch Security Systems, 2011[...]