Español dropdown-ico

Bosch NBC-265-W manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101

Ir a la página of

manuales de instrucciones parecidos

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Bosch NBC-265-W. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Bosch NBC-265-W o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Bosch NBC-265-W se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Bosch NBC-265-W, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Bosch NBC-265-W debe contener:
- información acerca de las especificaciones técnicas del dispositivo Bosch NBC-265-W
- nombre de fabricante y año de fabricación del dispositivo Bosch NBC-265-W
- condiciones de uso, configuración y mantenimiento del dispositivo Bosch NBC-265-W
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Bosch NBC-265-W no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Bosch NBC-265-W y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Bosch en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Bosch NBC-265-W, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Bosch NBC-265-W, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Bosch NBC-265-W. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    HD 720p IP Wireless Camera NBC-265-W en Installation and Operation Manual[...]

  • Página 2

    [...]

  • Página 3

    IP Camera 200 Series Table of Cont ents | en 3 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 T able of Contents 1S a f e t y 8 1.1 Safety precautions 8 1.2 Important safety instructions 9 1.3 FCC & ICES compliance 10 1.4 UL certification 11 1.5 CE certification 12 1.6 Bosch notices 12 1.7 Copyrights 13[...]

  • Página 4

    4 en | Table of Contents IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 5 Basic Mode 64 5.1 Basic Mode menu tree 64 5.2 Device Access 65 5.2.1 Camera name 65 5.2.2 Password 65 5.3 Date/Time 66 5.4 Network 67 5.5 Encoder 68 5.6 Audio 68 5.7 Recor ding 68 5.7.1 Storage medium 68 5.8 Sys[...]

  • Página 5

    IP Camera 200 Series Table of Cont ents | en 5 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 6.6.1 Alarm Connections 101 6.6.2 Video Content Analyses (VCA) 104 6.6.3 VCA configuration- Profiles 105 6.6.4 VCA configuration - Scheduled 111 6.6.5 VCA configuration - Event triggered 113 6.6.6 Audio Alarm 114 6[...]

  • Página 6

    6 en | Table of Contents IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 8.3 Customer service 141 9 Maintenance 142 9.1 Repairs 142 9.1.1 Transfer and disposal 142 10 Technical Data 143 10.1 Specifications 143 10.1.1 Dimensions 157 10.1.2 Accessories 160[...]

  • Página 7

    8 en | Safety IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 1S a f e t y 1.1 Saf ety precautions DANGER! High risk: This symbol indicates an imminently hazardous situation such as "Dangerous Voltage" inside the product. If not avoided, this will result in an electrical shoc[...]

  • Página 8

    IP Camera 200 Se ries Saf ety | en 9 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 1.2 Important safety instructions Read, follow, and retain for future reference all of the following safety instructions. Heed all wa rnings on the unit and in the operating instructions be fore operating the unit. 1. Cleani[...]

  • Página 9

    10 en | Safety IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 1.3 FCC & ICES compliance FCC & ICES Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules . These limits are designed to p[...]

  • Página 10

    IP Camera 200 Se ries Saf ety | en 11 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 The user may find th e following booklet, prepared by the Federal Communications Commission, helpful: How to Identify and Resolve Radio-TV Interference Problems . This booklet is available from the U.S. Go vernment Printing[...]

  • Página 11

    12 en | Safety IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 1.5 CE cer tificat ion This indicates compliance with the R&TTE Directive 1999/5/EC and meets the relevant parts of following technical specifications: ETSI EN 300 328 V1.7.1:2006 ETSI EN301489-17 V2.1.1:2009 ETSI EN301[...]

  • Página 12

    IP Camera 200 Se ries Saf ety | en 13 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 1.7 Copyrights The firmware 4.1 uses the fonts "Adobe-Helvetica-Bold-R- Normal--24-240-75-75-P-138-ISO10646-1" and "Adobe - Helvetica-Bold-R-Normal--12-120-75-75-P-70-ISO10646-1" under the following copy[...]

  • Página 13

    14 en | Introduction IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 2 Introduction 2.1 F eatur es This WLAN HD 720p IP camera is a ready-to-use , complete network video surveillance syst em inside a compact camera. The camera offers a cost-effective solution for a br oad range of appl[...]

  • Página 14

    IP Camera 200 Series Introduction | en 15 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 2.2 Unpacking Unpack carefully and handle the equipment with care. The packaging contains: – IP camera with lens – Universal power supply with US, EU and UK plug – Camera mount kit – Quick installation guide –[...]

  • Página 15

    18 en | Installation IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 3 Installation 3.1 Wirele ss antenna Figure 3.1 Wireless antenna 1. Screw the antenna onto the sc rew connector on the rear of the camera. 2. Straighten the antenna.[...]

  • Página 16

    IP Camera 200 Se ries Installation | en 19 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 3.2 SD card Figu re 3. 2 SD card 1. Unscrew the cover on the right side of the camera. 2. Slide the SD card into the slot. 3. Close and secure the cover. The camera supports most SD/SDHC cards. Note: Use high speed SD [...]

  • Página 17

    20 en | Installation IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 3.3 Mounting the camera The camera can be mounted eith er from the top or from the bottom (1/4"-20 UNC thread). The mounting socket is isolated from ground to prevent ground loops. Figure 3.3 Mounting a camera 1.[...]

  • Página 18

    IP Camera 200 Se ries Installation | en 21 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 3. Adjust the ball-socket so that camera moun t is correcrly aligned for the required angle. 4. Screw camera onto mount and, when in position, tighten the locking ring (1) securely. 5. Tighten the ball-socket adjustmen[...]

  • Página 19

    22 en | Installation IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 3.4 Ne twork conne ctor Figure 3.4 Ne twork connection – Connect the camera to a 10/100 Base-T network. – Use a shielded UTP Category 5e cable with RJ45 connectors. 1 2 3 4 DC12V Eth erne t Line-out Reset Line-in [...]

  • Página 20

    IP Camera 200 Se ries Installation | en 23 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 3.5 Po wer connection 3.5.1 DC power connect ion Figu re 3. 5 DC power conn ection 1. Slide the plug adapter that matches your outlet socket onto the supplied power supply. 2. Insert the power connector ja ck from the [...]

  • Página 21

    24 en | Installation IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 3.6 I/O connector Figure 3.6 I/O connector pins – Max. wire diameter AWG 22-28 for both stran ded and solid; cut back 5 mm (0.2 in) of insulation. – Relay output switching capability: Max. voltage 24 VAC or 24 VDC[...]

  • Página 22

    IP Camera 200 Se ries Installation | en 25 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 3.7 Audio connectors Figu re 3. 7 Audio connectors Connect audio devices to the Line In and Line Out connectors. 1 2 3 4 DC12V Etherne t Lin e-out Reset Lin e-in I/O Line - R GND Line - L Line in: 9 kOhm typ., 200 mV r[...]

  • Página 23

    26 en | Installation IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 3.8 Reset ting the camer a If the camera cannot be connected because the IP address has changed, press and hold the reset button (7 se conds approximately) until the LED flas hes (red) to recall the factory default va[...]

  • Página 24

    IP Camera 200 Series Brow ser connection | en 59 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 4 Bro wser connection A computer with Microsoft Internet Ex plorer can be used to receive live images from the camera, control cameras, and replay stored sequences. The ca mera is configured over the network usin[...]

  • Página 25

    60 en | Brow ser connection IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 4.2 Establishing the connection The camera must be assigned a valid IP address to operate on your networ k. The default addr ess pre-set at the factory is 192.168.0.1 1. Start the Web browser. 2. Enter the IP a[...]

  • Página 26

    IP Camera 200 Series Brow ser connection | en 61 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 4.4 Connection establishe d When a connection is established, the LIVEPAGE is initially displayed. The application title ba r displays the type number of the connected camera and three items: LIVEPAGE , RECORDING[...]

  • Página 27

    62 en | Brow ser connection IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems the configuration menu is open ed. All settings (except date/ time) are stored in the came ra memory so that they are retained, even if the power is interrupted. Changes that influence the fundamental functioni[...]

  • Página 28

    64 en | Basic Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 5B a s i c M o d e 5.1 Basic Mode menu tree The basic mode configuration menu allows a set of basic camera parameters to be configured. To view the current settings: 1. If necessary, click the Basic Mode menu to expand [...]

  • Página 29

    IP Camera 200 Series Basic Mode | en 65 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 5.2 Device Access 5.2.1 Camera name The camera can be assigned a name to assist in identifying it. The name simplifies the management of multiple devices in more extensi ve systems. The camera name is used for remo te ide[...]

  • Página 30

    66 en | Basic Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems Confirm password Re-enter the new password to ensure that there are no typing mistakes. The new password is only saved after clicking Set . Therefore, click Set immediately after entering and confirming the password, ev[...]

  • Página 31

    IP Camera 200 Series Basic Mode | en 67 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 5.4 Net work Use the settings on this page to integrate the device into a network. Some changes only take effect after a reboot. In this case, the Set button changes to Set and Reboot . 1. Make the desired changes. 2. Cli[...]

  • Página 32

    68 en | Basic Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 5.5 Encoder Select a profile for encoding the vide o signal. Pre-programmed profiles are available that give pr iority to different parameters. When a profile is selected, its de tails are displayed. Main frequency and [...]

  • Página 33

    IP Camera 200 Series Advanced Mode | en 69 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 6 Advanced Mode 6.1 Advan ced Mode menu tre e The advanced mode configuration menu contains all camera parameters that can be configured. To view the current settings: 1. Click the Advanced Mode menu to expand it. The [...]

  • Página 34

    70 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 6.2 G eneral 6.2.1 Identification Camera ID Each camera should be assigned a unique identifier that can be entered here as an addition al means of identification. Camera name Assign a camera name to assist in identif[...]

  • Página 35

    IP Camera 200 Series Advanced Mode | en 71 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 – live is the lowest authorization le vel. It can only be used to view the live video image and switch between the different live image displays. Use the various authorization le vels to limit access. Proper password[...]

  • Página 36

    72 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 6.2.3 Date/Tim e Date format Select the required date format. Device date / Device time If there are multiple devices operating in your system or network, it is important to sync hronize their inter nal clocks. For e[...]

  • Página 37

    IP Camera 200 Series Advanced Mode | en 73 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 5. Click one of the entries in th e table to make changes. The entry is highlighted. 6. Click Delete to remove the entry from the table. 7. Choose other values from the list boxes under the table, to change the selecte[...]

  • Página 38

    74 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems If the Custom option is selected, enter values in the X and Y position fields. Time stamping This field sets the position of th e time and date overlay. It can be displayed at the Top , at the Bottom , or a t a posit[...]

  • Página 39

    IP Camera 200 Series Advanced Mode | en 75 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 6.3 W eb Interface 6.3.1 Appearance Adapt the appearance of the web interface and change the website language to meet your requirements. If necess ary, replace the company's logo (top right) and the device name (t[...]

  • Página 40

    76 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 6.3.2 LIVEPAGE Functions In this window, adapt the Livepage f unctions to meet your requirements. Choose from a vari ety of different options for displaying information and controls. 1. Mark the check boxes for the f[...]

  • Página 41

    IP Camera 200 Series Advanced Mode | en 77 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 Allow snapshots Specify whether the icon for saving i ndividual images should be displayed below the live image. Individual images can only be saved if this icon is visible. Allow local recording Specify whether the ic[...]

  • Página 42

    78 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 6.4 Camera 6.4.1 Ins taller Menu Camera LED Disable the Camera LED on the camera to switch it off. Mirror image Enable Mirror image to obtain a vertically flipped image (around the horizontal axis) of the camera pict[...]

  • Página 43

    IP Camera 200 Series Advanced Mode | en 79 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 Note: Shutter time is affected by fram e rate in auto framerate mode. For example, if the frame rate is 30 IPS, the longest shutter time available is 1/30s. 6.4.2 Picture Settings Contrast (0...255) Adjusts the contras[...]

  • Página 44

    80 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems Default Click Defa ult to set all video values to their factory setting.[...]

  • Página 45

    IP Camera 200 Series Advanced Mode | en 81 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 6.4.3 Encoder Streams Select H.264 Settings 1. The codec algorithm for stream 1 is always: – H.264 MP 720p25/30 fixed 2. Select the codec algorithm for stream 2. The following are available: – Copy Stream 1 – H.2[...]

  • Página 46

    82 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems Note: The M-JPEG resolution follows th e highest r esolution set ting of either stream 1 or stream 2. For example, if stream 1 is VGA and stream 2 is QVGA, the JPEG reso lution will be VGA. The M-JPEG frame rate vari[...]

  • Página 47

    IP Camera 200 Series Advanced Mode | en 83 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 6.5 Recording Record the images from the camera to local storage media or to an appropriately conf igured iSCSI system. SDHC cards are the ideal solution for shorter storage times and temporary recordings, for example,[...]

  • Página 48

    84 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems further information, contact your local customer service at Bosch Security Systems. 6.5.1 Storage Management Device manager If the VRM option is activated, the VRM Video Recording Manager manages all recording and no[...]

  • Página 49

    IP Camera 200 Series Advanced Mode | en 85 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 Note: If a device had primary and seco ndary recording running on the SD card and is then added to a VRM system, the blocks used for primary recording will not be re-used, reducing the available recording space for ANR[...]

  • Página 50

    86 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 4. Check the box in the Rec. 1 or Rec. 2 column to specify which data stream should be recorded on the storage media selected. Rec. 1 stores stream 1, Rec. 2 stores stream 2. 5. Check the boxes for the Overwrite olde[...]

  • Página 51

    IP Camera 200 Series Advanced Mode | en 87 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 6.5.2 Recording Profiles Define up to ten different record ing profiles here, then assign these to individual days or times of day on the Recording Scheduler page. Modify the names of the recordin g profiles on the tab[...]

  • Página 52

    88 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems Alarm recording Select the Pre-alarm t ime from the list box. Select the Post-alarm time from the list box. Select the Alarm stream to use for alarm recording. Check the with encoding interval from profile: box and s[...]

  • Página 53

    IP Camera 200 Series Advanced Mode | en 89 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 6.5.3 Retention Time Specify the retention times for recordings. If the available memory capacity of a medium ha s been used, older recordings are only overwritten if the retention time entered here has expired. Make s[...]

  • Página 54

    90 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 6.5.4 Recording Scheduler The recording scheduler allows you to link the created recording profiles to the days and times at which the camera's images are to be recorded in th e event of an alarm. Schedules can [...]

  • Página 55

    IP Camera 200 Series Advanced Mode | en 91 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 Profile names To change the names of the reco rding profiles listed in the Time periods box: 1. Click a profile. 2. Click Rename . 3. Enter the new name and click Rename again. Activate recording After completing confi[...]

  • Página 56

    92 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 6.6 Alarm 6.6.1 Alarm Connections Select the respon se of the camera when an alarm occurs. In the event of an alarm, the device can automatically connect to a pre-defined IP address. The device can contact up to ten [...]

  • Página 57

    IP Camera 200 Series Advanced Mode | en 93 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 The camera connects to all remote stations protected by the same general password. To define a general password: 1. Select 10 in the Number of destination IP address list box. 2. Enter 0.0.0.0 in the Destination IP add[...]

  • Página 58

    94 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems display the alarm image. Refer to the destination device documentation concerning image display options and available video outputs. Decoder Select a decoder of the receiver to display the alarm image. The decoder se[...]

  • Página 59

    IP Camera 200 Series Advanced Mode | en 95 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 6.6.2 Video Content Analyses (VCA) The camera has integrated VCA which can detect and analyze changes in the signal using image processing algorithms. Such changes can be due to movements in the came ra's field of[...]

  • Página 60

    96 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 6.6.3 VCA configuration- Profiles Configure two profiles with diff erent VCA configurations. Save profiles on your computer's ha rd drive and load saved profiles from there. This can be useful if testing a numbe[...]

  • Página 61

    IP Camera 200 Series Advanced Mode | en 97 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 Analysis type Select the required analysis algorithm. By default, only Motion+ is available — this offers a motion detector and essential recognition of tampering. Metadata is always created for a video content analy[...]

  • Página 62

    98 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems Minimum object size Specify the number of sensor fiel ds that a moving object must cover to generate an alarm. Th is setting prevents objects that are too small from triggering an alarm. A minimum value of 4 is recom[...]

  • Página 63

    IP Camera 200 Series Advanced Mode | en 99 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 Sensitivity and Trigger delay [s] can only be changed if Reference check is selected. Sensitivity The basic sensitivity of the tam per detection can be adjusted for the environmental conditio ns to which the camera is [...]

  • Página 64

    100 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems Scene too dark Activate this function if tamperi ng associa ted with covering the objective (for instance, by sprayi ng paint on it) should trigger an alarm. The average brightness of the scene provides a basis for [...]

  • Página 65

    IP Camera 200 Series Advanced Mode | en 101 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 Appearing edges Select this option if the selected area of the reference image includes a largely homogenous surf ace. If structures appear in this area, then an alarm is triggered. Selecting the area Select the image[...]

  • Página 66

    102 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 6.6.4 VCA configuration - Scheduled A scheduled configuration allows you to link a VCA profile with the days and times at which the vi deo content analysis is to be active. Schedules can be defined for weekday s and[...]

  • Página 67

    IP Camera 200 Series Advanced Mode | en 103 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 3. Click OK . The item is deleted from the table and the window closes. 4. The process must be repeated for deleting additional days.[...]

  • Página 68

    104 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 6.6.5 VCA configuration - Event triggered This configuration allo ws you to stipulate that the video content analysis is only to be activate d when triggered by an event. As long as no trigger is activated, the Sile[...]

  • Página 69

    IP Camera 200 Series Advanced Mode | en 105 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 6.6.6 Audio Alarm Create alarms based on audi o signals. Configure signal strengths and frequency ranges so that false alarms, for example, machine noise or ba ckground noise, are avoided. Set up normal audio transmis[...]

  • Página 70

    106 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 6.6.7 Alarm E-Mail As an alternative to automatic connecting, alarm states can also be documented by e-mail. This makes it possible to notify a recipient who does not have a vide o receiver. In this case, the camera[...]

  • Página 71

    IP Camera 200 Series Advanced Mode | en 107 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 Destination address Enter the e-mail address for al arm e-mails here. The maximum address length is 49 characters. Sender name Enter a unique name for the e-mail sender, for example, the location of the device. This m[...]

  • Página 72

    108 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 6.7 Interfaces 6.7.1 Alarm input Configure the alarm trigger for the camera. Select N.C. (Normally Closed) if the al arm is to be triggered by opening the contact. Select N.O. (Normally Open) if the alar m is to be [...]

  • Página 73

    IP Camera 200 Series Advanced Mode | en 109 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 Relay follows If required, select a specific event that will trigger the relay. The following events are possible triggers: – Off : Relay is not triggered by events – Connection : Trigger whenever a connection is [...]

  • Página 74

    110 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 6.8 Network 6.8.1 Network Access The settings on this page are used to integrate the device into a network. Some changes only take effect after a reboot. In this case Set changes to Set and Reboot . 1. Make the desi[...]

  • Página 75

    IP Camera 200 Series Advanced Mode | en 111 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 Subnet mask Enter the appropriate subnet mask for the set IP address. Gateway address For the device to estab lish a connection to a remote location in a different subnet, enter the IP address of th e gateway here. Ot[...]

  • Página 76

    112 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems deactivates all unencrypted conne ctions allowing connections on the HTTPS port only. RCP+ port 1756 Activating RCP+ port 1756 allo ws unencrypted connections on this port. To allow only encrypted connections, se t [...]

  • Página 77

    IP Camera 200 Series Advanced Mode | en 113 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 Note: Information about the service , registration process and available host names can be found at DynDNS.org. Host name Enter the host name registered on DynDNS.org for the device here. User name Enter the user name[...]

  • Página 78

    114 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 6.8.2 Advanc ed The settings on this page are used to set advanced settings the network. Some changes only take effect after a reboot. In this case Set changes to Set and Reboot . 1. Make the desired changes. 2. Cli[...]

  • Página 79

    IP Camera 200 Series Advanced Mode | en 115 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 RTSP port If necessary, select a different port for the exchange of the RTSP data from the list. The standard RTSP port is 554. Select Off to deactivate the RTSP function. UPnP Select On to activate UPnP communication[...]

  • Página 80

    116 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 6.8.4 Multicast In addition to a one-to-one co nnection between a camera and a single receiver (unicast), the camera can enable multiple receivers to receive the video signal s imultaneously. This is either done by [...]

  • Página 81

    IP Camera 200 Series Advanced Mode | en 117 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 Duplication of data places a heavy demand on the CPU and can lead to impairment of the image quality under certain circumstances. Port Enter the port address for the stream here. Streaming Click the checkbox to activa[...]

  • Página 82

    118 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems FTP server IP address Enter the IP address of th e FTP server on which to save the JPEG images. FTP server login Enter your login name for the FTP server. FTP server password Enter the password that gives access to [...]

  • Página 83

    IP Camera 200 Series Advanced Mode | en 119 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 6.9 Ser vice 6.9.1 Maintenance Firmware The camera functions and para meters can be updated by uploading new firmware. To do this, the latest firmware package is transferred to the device via the network. The firmware[...]

  • Página 84

    120 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems If the operating status LED lights up red, the upload has failed and must be repeated. To perf orm the upload, switch to a special page: 1. In the address bar of your browser, enter /main.htm after the device IP add[...]

  • Página 85

    IP Camera 200 Series Advanced Mode | en 121 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 Maintenance log Download an internal maintenanc e log from the device to send it to Customer Servic e for support purposes. Click Download and select a storage location for the file. Note: Make sure that the HTTPS bro[...]

  • Página 86

    132 en | Operation via the bro wser IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 7 Operation via the brow ser 7.1 Liv epage After the connection is established, the Livepage is initially displayed. It shows the live video image on the right of the browser window. Depending on th e c[...]

  • Página 87

    IP Camera 200 Series Operation via the browse r | en 133 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 7.1.2 Image selection View the image on a full screen. – Click the Stream 1 , Stream 2 or M-JPEG tab below the video image to switch between the differen t displays for the camera image. Display Stampin[...]

  • Página 88

    134 en | Operation via the bro wser IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 7.1.3 Digital I/O Depending on the configuration of the unit, the alarm input and the relay output are displayed ne xt to the camera image. The alarm symbol is for information and indicates the input st[...]

  • Página 89

    IP Camera 200 Series Operation via the browse r | en 135 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 7.1.5 Saving snapshots Individual images from the vide o sequence that is currently being shown on the Livepage can be saved in JPEG format on the computer 's hard drive.  Click the camera icon to[...]

  • Página 90

    136 en | Operation via the bro wser IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems All connected users receive audio signals se nt from the camera but only the user who first pressed the F12 key can send audio signals; others mus t wait for the first us er to release the key.[...]

  • Página 91

    IP Camera 200 Series Operation via the browse r | en 137 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 7.2 Recordings page Click Recordings to access the Recordings page from the Livepage or Settings page (the Recordings link is only visi ble if a storage medium has been selected). Note: Install the BVIP L[...]

  • Página 92

    138 en | Operation via the bro wser IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems – If required, drag the green ar row to the point in time at which the playback should begin. – Red bars indicate the points in time where alarms were triggered. Drag the green arrow to navigate to [...]

  • Página 93

    140 en | T roubleshoot ing IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 8 T roubleshoo ting 8.1 LED indicators The camera has LEDs on the front and the rear panel that show the operating status and can indicate possible malfunctions. Power LED Does not light up: Camera is switched o[...]

  • Página 94

    IP Camera 200 Series T roubleshooting | en 14 1 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 version numbers of the firmware and other status information can be seen when the unit starts or by opening the Servi ce menu. Note down this informati on and the information found on the camera label before conta[...]

  • Página 95

    142 en | Maint enance IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems 9 Maintenance 9.1 Repairs 9.1.1 Transfer and disposal The camera should only be pa ssed-on together with this installation guide. The unit co ntains environmentally hazardous materials that must be disposed of accord[...]

  • Página 96

    IP Camera 200 Se ries T echnical Data | en 143 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 10 T echnical Data 10.1 Specifications Input voltage +12 VDC Power consumption 4.6 W (max) Sensor type ¼-inch CMOS Sensor pixels 1280 x 800 Sensitivity 0.3 lux Video resolution 720p, 4CIF/D1, VGA, CI F, QVGA Video[...]

  • Página 97

    144 en | T echnical Data IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems Recording Continuous record ing, ring recording. alarm/ events/schedule recording Unit Configuration Via web browser or PC surveillance software Protocols HTTP, HTTPs, SSL, TCP, UDP, ICMP,RTSP, RTP, Telnet, IGMPv2[...]

  • Página 98

    IP Camera 200 Se ries T echnical Data | en 145 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.54 | 2011.08 10.1.1 Dimensions Figure 10.1 Dimensions 10.1.2 Accessories LTC 9348/00 Series Indoor Dome – housings for cameras/lens to 216 mm (8.5 in), ceiling mount, tinted, metal backbox Contact a Bosch representative in yo[...]

  • Página 99

    146 en | T echnical Data IP Camera 200 Series AR18-10-B012 | v1.54 | 2011.08 Installation and Opera tion Manual Bosch Securi ty Syst ems[...]

  • Página 100

    [...]

  • Página 101

    Bosch Security Systems www.boschsecurity.com © Bosch Security Systems, 201 2[...]