Boss Audio Systems 830UA manual

4 10 R - 02 0896[...]

1 10 4 14 9 6 8 15 16 3 2 12 13 7 11 5 1. BUT TONS L OCA TION AND FUNCTIONS 1. Panel Release Button 2. Power / Mute Button 3. CD Eject Button 4. Audio Button 5. Display Button / ID3 Information Button 6. Local / Distant Button 7. Preset Memory Buttons 8. iX -Bass Button 9. Source Button 10. Volume Knob 11. Automatically Store / Preset Scan Button 1[...]

This radio is equipped with the most advanced "TOUCH SENSE P ANEL", so that it is easy and convenient to use while driving. Here are some tips to show you how easy it is to use this touch sense panel: Tips Using a very light touch on the radio panel will activate that feature. Y ou will not need to "PRESS" hard on the panel to m[...]

MOISTURE CONDENSA TION NOTES ON CDs P. 2 P. 3 P. 4 P. 1 P. 5 P. 6 P. 7 1. 2. 3. 4. 5. NOTES ON DISCS There are paste residue. I n ki ss t i c k y( P . 5 ) . Stickers that are beginning to peel away , leaving a sticky residue (P .6). Labels are attached (P .7). On a rainy day or in a very damp area, moisture may condense on the lenses inside the uni[...]

E - 2 Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and system work properly . Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. Consult with your nearest dealer if installation requires the dr[...]

E - 3 DIN REAR-MOUNT (METHOD B) Installation using the screw holes on the sides of the unit. Fastening the unit to the factory radio mounting bracket. 1. Select a position where the screw holes of the bracket and the screw holes of the main unit become aligned (are fitted) and tighten the screws at 2 places on each side. 2. Screw 3. Factory radio m[...]

E - 4 Removing The Detachable Control Panel (D.C.P .). 1. T urn the power off 2. Press the D .C.P . release button 3. Remove the D .C.P . P ANEL RELEASE BUTTON B A 2 Attaching the DCP CAUTION 1. Attach the panel at the right side first, with point B on the main unit touching point A on the D .C.P . (As shown on the digram). 2. Then press the left s[...]

5. WIRING DIAGRAM (20 PIN HARNESS PLUG) E - 5 688A FUSE FUSíVEL FUSIBLE FUSIBILE SICHERUNG FUSIBLE ANTENNA CABLE INPUT CAVO ANTENNA ESTENDIBILE ENTRADA PARA CABO DE ANTENA CABLE DE ANTENA ANTENNENVERLÄNGERUNGS KABEL CÂBLE D'EXTENSION D' ANTENNE GREY/GRAU/GRIS/CINZA/GRIS/GRIGIO GREY -BLACK/GRAU-SCHWARZ/GRIS-NOIR/CINZA-PRETO /GRIS-NEGRO/[...]

E - 6 Press this button to remove the control panel. 6. BASIC OPERA TIONS 1) P ANEL RELEASE BUTTON (REL) 11) DISP BUTTON(DISP) Pres s this bu tton brie fly , the LCD will disp lay the cl ock for ab out 5 seco nds, th en retu rn to prev ious disp lay mode . 13) POWER ON/OFF BUTTON ( ) Press the POWER button on the front of the unit to turn on the un[...]

E - 7 7. MENU OPERA TIONS TIME SET (CLK) The time on the clock is set to “12:00” by default, Rotate the encoder volume knob to adjust the minutes and hours.Press AUDIO/MENU button to select the hour or minute. Note: Time format can not to set up, it should be follow the tunner area to change, when is in U .S.A Latin then the time in 12H by defa[...]

E - 8 8. RADIO OPERA TIONS 9) RADIO SIGNAL STRENGTH METER (RSLM) This is use to indicate the signal strength of current radio station broadcast. When you choose RADIO mode, it will show on the display . 5) L OCAL/DISTANT BUTTON (LO/DX) During station tuning, this button allows you prior to access strong local station only (Local mode), or to access[...]

E - 9 9.CD OPERA TIONS 4) CD SL OT Insert the disc into CD slot. The CD will begin to play . M1) P AUSE BUTTON (P A U) Press this button to pause CD play , press again to release pause. M2) SCAN BUTTON (INT) Press this button, the first 10 seconds of each track will be played sequentially until this button is pressed again, then normal play will re[...]

10. USB DRIVE OPERA TIONS ST ART THE USB DEVICE MODE 2. Plug in the USB drive / device completely as indicated in picture 2 (P .2) and display will show “USB PLA Y” to indicate that the USB drive / device is being plugged in correctly & the download has begun. 3.Does not matter the unit is in what mode (TUNER, CD , SD/MMC, etc), once a USB [...]

11. SD/MMC OPERA TIONS 1.Press panel release button to release the front panel. (P .1) 2.The SD/MMC card slot is located on the unit as indicated in (P .2). 3. Insert the SD/MMC card into the card slot in the correct direction until a “CLICK” sound is heard. (P .3) 4.Close the front panel. (P .4) 5. The display will show “SD PLA Y” to indic[...]

E - 12 Notes : L OADING DISC NAVIGA TING THROUGH DIRECTORIES AND TRACKS Insert the CD as usual, if it is an MP3 CD , the display will show “MP3 T01” then the message “READING” will appear , when disc scanning completed, the first track on the first directory will play . - An MP3 directory is shown in this manual as “Directory”, and an M[...]

E - 13 (2) SEARCH DIRECTORY / TRACK NAME B Y USING ENCODER VOLUME KNOB Under MP3 Play Mode, press MP3 MENU BUTTON twice, the display shows “ * “. Rotate the ENCODER VOLUME KNOB for selecting the character . In this Encoder Search mode, SELECT button use as move cursor . Press BAND button use as MP3 CONFIRM BUT TON. The unit searches files and d[...]

13.REMOTE CONTROL E - 14 1 8 4 2 14 13 12 11 10 9 3 5 6 7 OPERA TIONS: 2. V olume Up/Down 1. Power 9. Audio Key 6. LOC () 7. Scan 5. T uning Up/Down 8. Mute Radio Mode Power On/Off Adjust Vol,Bas, T re,Fad,Bal Sation Scan T uning/Seek Up/Down Local/Distant Mute 14. Numeric Key(1) (2) (3) (4) (5) (6) Preset station 1 Preset station 2 Preset station [...]

E - 15 14.SPECIFICA TIONS Frequency Range Intermediate Frequency Usable Sensitivity Stereo Separation S/N Ratio 87.5-107.9MHz 87.5-108MHz 10.7 MHz Better than 15dB at S/N 30 dB 25 dB at 1KHz 50 dB CD PLA YER RADIO SECTION FM System Usable disc Sampling frequency No of quantization bits Frequency Number of channels S/N Ratio Compact disc audio syste[...]

E - 16 15.TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer . Symptom Cause Solution No power The car ignition is not on. If the power supply is properly connected to the car accessory terminal, switch the ignition key to [...]