Brother XL5010 manual

Instruction Manual Manual de instrucciones Manuale d’istruzione[...]

“IMPOR T ANT SAFETY INSTR UCTIONS” When using the sewing machine, basic safety precautions should always be followed, including the following: “Read all instructions before using. ” D ANGER – T o reduce the risk of electric shock: 1. The sewing machine should ne v er be left unattended when plugged in. Alwa ys unplug this sewing machine f[...]

“IMPOR T ANTES INSTR UCCIONES DE SEGURID AD” Cuando se usa una máquina de coser , debe seguirse unas precauciones básicas y que se detallan a continuación. “Leer todas las instrucciones antes de usarla” PELIGR O – P ara reducir el riesgo de una descarga eléctrica. 1. La máquina no debe dejarse nunca desatendida mientras esté conecta[...]

“IMPOR T ANTI ISTR UZIONI DI SICUREZZA” Quando usate la macchina per cucire, rispettate sempre le precauzioni di sicurezza, incluso quanto qui di seguito specificato . “Leggete tutte le istruzioni prima dell’uso. ” PERICOLO – P er ridurre il r ischio di shock elettrico . 1. La macchina per cucire non de ve essere mai lasciata abbandonat[...]

IMPORTANT If the available socket outlet is not suitable for the plug supplied with this equipment, it should be cut off and an appropriate three pin plug fitted. With alternative plugs an approved fuse must be fitted in the plug. NOTE: The plug severed from the main leads must be destroyed as a plug with bared flexible cords is hazardous if engage[...]

CONTENTS BUTTONHOLE AND BUTTON SEWING Making a Buttonhole (XL5030 and XL5020 only) .... 47 Making a Buttonhole (XL5010 only) ........................ 49 Buttonhole Fine Adjustment .................................... 52 Button Sewing ......................................................... 54 USING A TT ACHMENTS AND APPLICA TIONS Zipper Inserting [...]

ÍNDICE DEL CONTENIDO CONOZCA SU MÁQUINA DE COSER ELEMENT OS PRINCIP ALES ............................................ 2 A CCESORIOS ................................................................... 3 FUNCIONAMIENT O DE LA MÁQUINA DE COSER ......... 5 Cone xión de los enchufes ........................................ 5 Interruptor pr incipal y[...]

SOMMARIO CONOSCERE LA MA CCHINA D A CUCIRE P ARTI PRINCIP ALI ................................................................. 2 A CCESSORI .............................................................................. 3 FUNZIONAMENT O DELLA MA CCHINA D A CUCIRE ... 5 Collegamento elettrico ....................................................... 5[...]

1 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX PRINCIP AL P ARTS 1 Bobbin winding assembly W inds the thread onto the bobbin to be used for the lower thread. 2 Spool pin Holds the spool of thread. 3 Bobbin winding te[...]

2 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX ELEMENT OS PRINCIP ALES 1 P or ta bobinas Hace bobina para la canilla que v a a ser utilizada como hilo inf e- rior . 2 P or ta carretes Sopor ta el carrete del hilo 3 G[...]

3 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX ACCESSORIES XL5030/5020 1 Buttonhole foot (1 pc.) 2 Zipper foot (1 pc.) 3 Button sewing foot (1 pc.) 4 Needle pack (regular single needle HA × 130) (3 pcs.) 5 T win nee[...]

4 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX XL5010 1 Buttonhole foot (1 pc.) 2 Zipper foot (1 pc.) 3 Button sewing foot (1 pc.) 4 Needle pack (regular single needle HA × 130) (3 pcs.) 5 T win needle (1pc.) 6 Bobb[...]

5 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX OPERA TING YOUR SEWING MACHINE Connecting Plugs 1. Insert the foot controller plug, located between the foot controller and the power supply plug on the cord, into the j[...]

6 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX 1 2 Main Power and Sewing Light Switches This switch turns the main power and sewing light on or off. (See fig. A .) 1 T urn on (toward the “I” mark) 2 T urn off (to[...]

7 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Inserting the Needle T urn power switch to “O”. 1. Remove the power supply plug from the electrical outlet. 2. Raise the needle bar to its highest position. 3. Lower[...]

8 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Changing the Presser Foot It may be necessary to change the presser foot according to your sew- ing needs. SNAP-ON TYPE T urn power switch to “O”. 1. Raise the needl[...]

9 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Converting to Free-Arm Style Free-arm sewing is convenient for sewing tubular and hard-to-reach areas on garments. T o change your machine to the free-arm style, lift up[...]

10 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX V ARIOUS CONTROLS Pattern Selection Dial T o select a stitch, simply turn the pattern selection dial in either direc- tion. Stitch widths and lengths are shown on the f[...]

11 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX RECOMMENDED WIDTHS AND LENGTHS FOR STITCHES XL5030 PA TTERN STITCH NAME PRESET WIDTH RECOMMENDED PAGE IN [mm (inch)] LENGTH INSTRUCTIONS [mm (inch)] 1 BUTT ONHOLE 5 -1.[...]

12 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX XL5020 PA TTERN STITCH NAME PRESET WIDTH RECOMMENDED PAGE IN [mm (inch)] LENGTH INSTRUCTIONS [mm (inch)] 1 BUTT ONHOLE 5 -1.5 47 (13/64) (1/64-1/16) 2 STRAIGHT STITCH ?[...]

13 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX XL5010 PA TTERN STITCH NAME PRESET WIDTH RECOMMENDED PAGE IN [mm (inch)] LENGTH INSTRUCTIONS [mm (inch)] 1 (A-B-C-D) BUTTONHOLE 5 -1.5 49 (13/64) (1/64-1/16) 2 ZIGZAG S[...]

14 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX ANCHOS Y LARGOS DE PUNT AD AS RECOMEND ADOS XL5030 PUNT AD A NOMBRE ANCHO LARGO PÁGINA DEL PREAJUST ADO RECOMEND ADO MANU AL [mm (pulgadas)] [mm (pulgadas)] 1O J A L 5[...]

15 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX XL5020 PUNT AD A NOMBRE ANCHO LARGO PÁGINA DEL PREAJUST ADO RECOMEND ADO MANU AL [mm (pulgadas)] [mm (pulgadas)] 1O J A L 5 -1,5 48 (13/64) (1/64-1/16) 2 PUNT AD A REC[...]

16 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX XL5010 PUNT AD A NOMBRE ANCHO LARGO PÁGINA DEL PREAJUST ADO RECOMEND ADO MANU AL [mm (pulgadas)] [mm (pulgadas)] 1 (A-B-C-D) OJAL 5 -1,5 49 (13/64) (1/64-1/16) 2 PUNT [...]

17 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX AMPIEZZE E LUNGHEZZE DEI PUNTI CONSIGLIA TE XL5030 PUNTO NOME PUNTO LARGHEZZA LUNGHEZZA P A GINA DEL PREFISSA T A CONSIGLIA T A MANU ALE [mm] [mm] 1 ASOLA 5 -1,5 48 (13[...]

18 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX XL5020 PUNTO NOME PUNTO LARGHEZZA LUNGHEZZA P A GINA DEL PREFISSA T A CONSIGLIA T A MANU ALE [mm] [mm] 1 ASOLA 5 -1,5 48 (13/64) (1/64-1/16) 2 PUNTO DIRITT O – -4 36 [...]

19 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX XL5010 PUNTO NOME PUNTO LARGHEZZA LUNGHEZZA P A GINA DEL PREFISSA T A CONSIGLIA T A MANU ALE [mm] [mm] 1 (A-B-C-D) ASOLA 5 -1,5 49 (13/64) (1/64-1/16) 2 PUNTO ZIGZA G 1[...]

20 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Stitch Length Dial Depending on your selected stitch, you may need to adjust the stitch length for best results. The numbers marked on the stitch length dial represent [...]

21 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Stretch Stitching Selecting a stretch stitch Setting the stitch length dial to “ SS ” changes the selected pattern to a stretch stitch. (See fig. A. ) Adjusting the[...]

22 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Reverse Sewing Lever T o sew in reverse, press down the reverse sewing lever as far as possi- ble and hold it in that position while lightly stepping on the foot con- t[...]

23 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX THREADING THE MACHINE W inding the Bobbin 1. Place the spool of thread on the spool pin and pass the thread around the bobbin winding tension disc. 1 Bobbin winding ten[...]

24 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Lower Threading T urn power switch to “O”. 1. Raise the needle to its highest position by turning the balance wheel toward you (counterclockwise) and raise the pres[...]

25 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX 2 4 1 3 Upper (Needle) Threading T urn power switch to “O”. 1. Raise the presser foot lever and turn the balance wheel toward you (counterclockwise) to raise the th[...]

26 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX A 2 4 3 1 2 4 1 3 6 E D BC 5 5 Enhebrado superior (de la aguja) Desenchuf ar la máquina, interruptor principale a “O”. 1 . Lev ante la palanca del prensatelas y gi[...]

27 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Using the Needle Threader (when the machine is equipped with a needle threader) T urn power switch to “O”. 1. Lower the presser foot lever . 2. T urn the balance wh[...]

28 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX 1 2 3 5 4 2 1 6 6 7 Uso del enhebrador (cuando la máquina está equipada con una enhebradora de hilo) Desenchuf ar la máquina, interruptor principale a “O”. 1. Ba[...]

29 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Quick Thread-setting System F AST ST ART BOBBIN (when the machine is equipped with a quick thread-setting system) This new system allows you to start sewing immediately[...]

30 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Drawing Up Lower Thread 1. Raise the presser foot and the needle to their highest positions. 2. With your left hand, hold the end of the upper thread. W ith your right [...]

31 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX T win-Needle Sewing Y our sewing machine is designed for twin-needle sewing, which al- lows you to sew using two upper threads. Y ou can use the same color or two diffe[...]

32 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Thread T ension Thread tension will affect the quality of your stitches. It may need to be adjusted when you change fabric or thread type. NOTE: It is recommended that [...]

33 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX T ensión de los hilos La tensión de los hilos es muy importante para la calidad de las puntadas y puede requerir un ajuste al cambiar de tejido o de hilo . NO T A: Le[...]

34 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX CHART OF SEWING F ABRICS, NEEDLES AND THREAD COMBINA TIONS SEWING FABRICS NEEDLE SIZES THREAD SIZES Cotton: 80 Synthetic Fine Mercerized Cotton Cotton: 60~80 Silk: “A[...]

35 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Cotone: 80 Filato sintetico Filato f ine mercerizzato Cotone: 60~80 Seta: “ A” Filato sintetico Filato mercerizzato 50 Cotone: 50~60 Seta: “ A” Filato sintetico[...]

36 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Straight Stitching XL5030 XL5020 XL5010 Pattern Stitch Length 2 2 5 Straight Stitch (Center needle position) 1-4 3 3 6 Straight Stitch (Left needle position) 12 10 13 T[...]

37 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Changing Sewing Directions (fig. A) 1. Stop the machine at the point where you wish to change directions with the needle still in the fabric. 2. Raise the presser foot [...]

38 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Removing the Material From the Machine 1. Stop the machine. 2. Raise the needle to its highest position and make sure that the thread take-up lever is also in its highe[...]

39 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Zigzag Stitching XL5030 XL5020 XL5010 Pattern Stitch Length Stitch W idth 4 4 2 Zigzag Stitch Fixed 1.7 5 5 3 Zigzag Stitch -4 Fixed 3.5 6 6 4 Zigzag Stitch Fixed 5 ZIG[...]

40 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX A B C D Blind Hem Stitching XL5030 XL5020 XL5010 Pattern Stitch Length Stitch Width 7 7 – Blind Hem Stitch -2 Fixed 5 10 – 7 Stretch Blind Stitch -1.5 Fixed 3.5 The[...]

41 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Shell T uck Stitching XL5030 XL5020 XL5010 Pattern Stitch Length Stitch Width 8 8 8 Shell T uck Stitch -3 Fixed 5 The Shell T uck Stitch can be used to sew a picot (lac[...]

42 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Elastic Stitching XL5030 XL5020 XL5010 Pattern Stitch Length Stitch Width 9 9 9 Elastic Stitch -2.5 Fixed 5 The Elastic Stitch can be used in three different ways: to m[...]

43 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Scallop Stitching XL5030 XL5020 XL5010 Pattern Stitch Length Stitch Width 1 1 – – Scallop Stitch -1.5 Fixed 5 This machine automatically produces a Scallop Stitch w[...]

44 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Overedge Stitching XL5030 XL5020 XL5010 Pattern Stitch Length Stitch Width 17 15 – Stretch Overlock Stitch Fixed 3 18 16 16 Elastic Overlock Stitch Fixed 2.5 20 – 1[...]

45 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Feather Stitching XL5030 XL5020 XL5010 Pattern Stitch Length Stitch Width 19 17 17 Feather Stitch Fixed 2.5 Fixed 5 Use the Feather Stitch as a decorative top stitch or[...]

46 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX T riple Zigzag Stretch Stitching XL5030 XL5020 XL5010 Pattern Stitch Length Stitch W idth 14 12 10 T riple Zigzag Stretch Stitch Fixed 1.7 15 13 1 1 T riple Zigzag Stre[...]

47 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Making a Buttonhole (XL5030 and XL5020 only) XL5030 XL5020 Pattern Stitch Length Stitch Width Foot 11 Buttonhole -1.5 Fixed 5 Buttonhole Foot NOTE: 1. It is recommended[...]

48 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX – 1 3 2 4 1 3 24 PUSH PUSH PUSH A E CD B P ara coser ojales (Solo XL5030 y XL5020) XL5030 XL5020 Número de puntada Largo de puntada Ancho de puntada Prensatelas 1 1 [...]

49 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Making a Buttonhole (XL5010 only) XL5010 Pattern Stitch Length Stitch Width Foot 1(A-B-C-D) Buttonhole -1.5 Fixed 5 Buttonhole Foot NOTE: 1. It is recommended to practi[...]

50 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Step 2 (Left side) Step 4 (Right side) MAKING A BUTTONHOLE Step Sewn Portion Pattern How to Sew 1. Set the pattern selection dial to “A”. 2. Lower the presser foot [...]

51 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX A A/C A C B A/C A C D B C D Securing the Stitching and Cutting the Buttonhole 1. T o secure the stitching, turn the material 90 ° counterclockwise and sew straight sti[...]

52 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Buttonhole Fine Adjustment If the stitching on the two sides of the buttonhole do not appear iden- tical, the following adjustments can be made. 1. Set the Stitch Lengt[...]

53 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Ajuste fino de los ojales Si las puntadas en ambos lados del ojal no parecen ser idénticas , se pueden hacer los siguientes ajustes. 1. Ponga el selector de puntadas e[...]

54 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Button Sewing XL5030 XL5020 XL5010 Pattern Stitch Length Foot 4, 5, 6 4, 5, 6 2, 3, 4 Zigzag Stitch Any Button Sewing Foot 1. Measure the distance between the holes and[...]

55 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Costura de botones XL5030 XL5020 XL5010 Número de puntada Largo de puntada Prensatelas 4, 5, 6 4, 5, 6 2, 3, 4 Puntada zigzag Cualquiera Prensatelas para botones 1. Mi[...]

56 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Zipper Inserting XL5030 XL5020 XL5010 Pattern Stitch Length Foot 2 2 5 Straight Stitch 2-3 Zipper Foot The zipper foot is used to sew various types of zippers and can e[...]

57 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Inserción de cremalleras XL5030 XL5020 XL5010 Número de puntada Largo de puntada Prensatelas 2 2 5 Puntada recta 2-3 P ata de cremallera La pata de cremallera sirve p[...]

58 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX A B Darning XL5030 XL5020 XL5010 Pattern Stitch Length 1 1 5 Straight Stitch Any 1. Place the darning plate on the needle plate as shown in fig. A . 1’. Lower the fee[...]

59 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Appliques XL5030 XL5020 XL5010 Pattern Stitch Length Stitch W idth 4 4 2 Zigzag Stitch Fixed 1.7 5 5 3 Zigzag Stitch -2 Fixed 3.5 6 6 4 Zigzag Stitch Fixed 5 An appliqu[...]

60 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Monogramming and Embroidering XL5030 XL5020 XL5010 Pattern Stitch Length Stitch W idth Foot 4 4 2 Zigzag Stitch Fixed 1.7 5 5 3 Zigzag Stitch -2 Fixed 3.5 None 6 6 4 Zi[...]

61 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Monogramming 1. Sew moving the hoop slowly along the lettering at a constant speed. 2. Secure with a few straight stitches at the end of the last letter . Embroidering [...]

62 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Changing the Bulb 1. Remove the power supply plug from the outlet. 2. Loosen the face plate screw as shown in fig. A . 3. Remove the face plate from the machine as illu[...]

63 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Oiling 1. Remove the power supply plug from the outlet. 2. Remove the needle plate and the face plate. 3. Put 2 to 3 drops of oil at each point indicated by the arrows.[...]

64 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Cleaning Removing the Shuttle Hook 1. Raise the needle to its highest position and remove the power sup- ply plug from the outlet. 2. Remove the extension table and ope[...]

65 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Performance Checklist Whenever sewing difficulties are encountered, review the section in this instruction manual that details the operation you are performing to make [...]

66 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ Page 34 Page 7 Page 25 No Page 20 No Page 7 No No Page 5 No No No Page 7 No Page[...]

67 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Listado de posibles incidencias Cada v ez que se encuentre con dificultades al coser , vuelva a consultar la parte de este manual de instrucciones que detalla la operac[...]

68 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ Página 34 Página 7 Página 26 No Página 20 No Página 7 No No Página 5 No No[...]

69 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX T abella di controllo del funzionamento Ogni qualvolta si incontrano delle dif ficoltà nell’esecuzione del lav or o, ri vedere la sezione del libretto di istruzioni [...]

70 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ Pagina 35 Pagina 7 Pagina 26 No Pagina 20 No Pagina 7 No No Pagina 5 No Pagina 7 Pag[...]

71 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Repacking the Machine Keep the carton and packing materials for future use. It may become necessary to reship the sewing machine. Improper packing or improper packing m[...]

72 Page A Accessories ......................................................................... 3 Appliques .......................................................................... 59 B Balancing the Machine ..................................................... 10 Blindhem Stitching ............................................................ 40 [...]

73 Página A Accesorios ......................................................................... 3 Aguja Cambio ..................................................................... 7 Enhebrado .............................................................. 26 Enhebrador ............................................................. 28 V erificació[...]

74 Pagina A Accessori ...................................................................................... 3 Ago Controllo ............................................................................ 7 Inf ilatore ........................................................................... 28 Inf ilatura ...........................................[...]