Cables to Go 29573 manual

1 U SER G UIDE W IRELESS VGA D EVICE A DAPTER Model: 29573[...]

1 Introduction........................ ............................................................ ............................... ..............................2 Features............................. .........................................................................................................................3 System Requirements.... .[...]

2 Thank you for purchasing the TruLink™ Wireless VGA Device Adapter. Th is product utilizes the latest in wireless technology, so you can display video and imag es from a PC on a remote m onitor, projector, or television up to 30 feet away through the use of a compatible Wireless USB host adapter (sold separately). With a highly secure connection[...]

3  Supports high resolution UXGA video of 1600x1200 at distances up to 30ft  Works in both extended desktop a nd dual monitor/clone screen modes  Supports native mode for playback of high resolution video  Supports video streaming at up to 720p  Based on Ultra Wide Band technology, providing low power consumption  Certified Wirele[...]

4  Microsoft® Windows® XP 32-bit wi th Service Pack 3 or higher  Microsoft® Vista® 32-bit/64-bit  Microsoft Windows 7 32-bit/64-bit  VGA cable to connect from the Wireless VGA Device Adapter to your display device Minimum Requirements (Office, Product ivity, and Web applications) Windows XP- Processor: 1.66GHz Atom or Celeron Ram: 5[...]

5  Wireless VGA Device Adapter  One (1) Dipole Antenna  3ft USB A Male/Mini-B Male Cable  One (1) Power Adapter (cord approx. 4ft)  Pin-Association Stickers  Quick Start Guide  Driver CD w/Electronic User Guide P ACKAGE C ONTENTS[...]

6 5 1 2 3 468 7 W IRELESS VGA D EVICE A DAPTER 1. VGA : VGA Activity Indicator • LED is solid when disp lay cable is connected. • LED is blinking when dat a is being transferred. 2. PWR: Power Indicator • LED is solid when power is applied. 3. 1-2-3: Status Indicator • Illuminated number/s indicates the Wireless USB host adapter that is cur[...]

7 IMPORTANT NOTE: • If installing on Windows XP, Service Pack 3 (SP 3) is required. Verify that this h as been installed before installing the Wire less VGA Device Adapter software. • Before installing the software, if using a Wi reless USB host adapter make sure that it and the Wireless VGA Device Adapter are not connected to the computer and [...]

8 This will take you to the TruLink Wireless USB Kit InstallShield Wizard . Click “Next” to go to proceed with the install. Read and accept the Wirel ess USB software License Agreement by clicking “Yes”. S OFTWARE /D EVICE I NSTALLATION[...]

9 Read and accept the Li cense Agreement for the DisplayLink software. After the software installs, your installation is complete and you can hit the “Finish” bu tton to exit the wizard. Important: reboot/restart if prompted. S OFTWARE /D EVICE I NSTALLATION[...]

10 S TEP 2 (I F NECESSARY )-D RIVER I NSTALLATION F OR THE W IRELESS USB H OST A DAPTER ( SO LD SEP ARATELY ) 1. Install your Wireless USB host adapter if you have not already done so. Please refer to your Wireless USB host adapter instructional guide or you may tr y to contact the manufac turer for the proper driver installation process. 2. Your W[...]

11 S TEP 3 – D EVICE I NSTALLATION FOR THE T RU L INK W IRELESS VGA D EVICE A DAPTER The TruLink Wireless VGA Device Adapter supports two association me thods: Cable Association and Pin Association. Only one of these meth ods is necessary to complete inst allation. The instructions below describe steps for both methods, and how to use this adapte[...]

12 Figure: Pin Association Entry P IN A SSOCIATION For Pin Association, it is str ongly recommended that you use a TruLink Wireless USB Host Adapter, as some other Wireless USB host adapters may not support the fe ature. To pin associate with the TruLink Wireless USB Host Adapter, please do the following: 1. Make sure the Wireless VGA Device Adapt [...]

13 V ERIFY C ONNECTION To verify connection from Cable or PIN Associati on, you can open the Wireless USB host manager utility and you should have an icon displa yed representing the TruLink Wireless VGA Device Adapter. W IRED M ODE Your Wireless VGA Adapter can also be used wired mode. 1. Position the WIRELESS/WIRED sw itch in the WIRED position. [...]

14 W IRELESS VGA D ISPLAY S ETTINGS The TruLink Wireless VGA Device A dapter hosts a number of various se tti ngs so that you may configure your image to the way you need it. After you have properly installed t he USB to VGA Adapter, an icon repr esenting a monitor will appear in your Windows icon tray. This is the TruLink Displa yLink Manager. Fro[...]

15 NOTE: By default, your monitor will be set for the bes t resolution and will extend your screen to the right. Figure: Display Settings Menu U SING THE W IRELESS VGA D EVICE A DAPTER[...]

16 M ENU D ESCRIPTIONS Screen Resolution This allows adjustment for your vide o’s display capable screen resolution s. Please note that if all the options appear from the range of 64 0x480~1680x1050, your moni tor will most likely only accept what its maximum capability is. You may want to refer to your specification section of yo ur display user[...]

17 Advanced... This will allow you to go into the Display Propert ies settings and make adjustments to your display settings. W IRELESS USB H OST A DAPTER S ELECTION Your Wireless USB host adapter/s will have to go through the associati on process before they can be used with the TruLink Wireless VGA Device Adapter. For more informatio n about the [...]

18 W IRELESS USB H OST A DAPTER R ESET To erase all Wireless USB host adapt ers associated to your Wireless VG A Device Adapter, hold down the “RESET” button for 10 seconds. Th is will cause the Wireless VGA Devi ce Adapter to erase all Wireless USB host adapters that have been a ssociated from its list. Each Wireless USB host adapters will the[...]

19 1. Why can’t I install .NET? You may have an older version of .NET, preventing the newer one from bei ng installed. Using Add/Remove Programs or Programs a nd Features on the Control Panel , uninstall any version of Microsoft .NET Framework™ older t han version 2.0. Then install Mi crosoft .NET Framework™ from the Wireless VGA kit installe[...]

20 3. Why is my video choppy? If you are experiencing choppy video, try changing the channel (please refer to your Wireless USB host adapter settings for this) or move in your computer closer to the display. 4. I see a blue screen or my desktop backgroun d on my display connected with the Wireless VGA Device Adapter, but no icons. Is something wron[...]

21 1. We only recommend playing bac k video in “Extend” mode. 2. Don’t switch between “Mirror” and “Extended” modes while video is being played on the wireless display. Doing this can confuse the video player which may cause it to stop its playback. We recommend stopping playback, and th en switching viewing modes if needed. Then you [...]

22 Operating System Support Microsoft XP 32-bit; Microsoft Vista 32-bit/64-bit; Windows 7 32-bit/64-bit Operating Range Up to 30 feet (10 meters) PHY Data Rate 53.3Mbps, 80Mbps, 106.6Mbps, 16 0Mb ps, 200Mbps, 320Mbps, 40 0Mbp s, 480Mbps Frequency 3.1GHz to 4.8GHz (WiMedia Band G ro up 1) RF Modulation Typ e QPSK/DCM Interface USB 2.0 mini-B female [...]

23 At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one year warranty on this device. If you experience problems due to workmanship or material defect for the duration of this warranty, we will repair or replace this device. To request a Return Merchandise Authorization (RMA) number, contact customer se [...]

24 ! Do not plug the unit in any outlet that does not have enough current to allow the device to function. Refer to the specifications in this manual for power level of the unit. ! Liquid: If this unit or its corresponding power adapter has had liquid spilled on or in it, do not attempt to use the unit. Do not attempt to us e this product in an out[...]

25 C ABLE ASSOCIATION WI TH OTHER DEVICES A SSOCIATION C ONCEPT In order to establish a secure wireless connection, both your Wireless USB hos t adapter and the Wireless VGA Device Adapter must exchange information about each other. Th is is done via cable or PIN association. A SSOCIATION P ROCESS If you purchase additional Certified Wireless USB H[...]

26 Fi g ure: Cable Association C ABLE A SSOCIATION P ROCEDURE Cable association steps: Examples/F igures shown used with the associ ation of the TruLink Wireless VGA Device Adapter when used with t he TruLink Wireless USB Host Adapter. This process will vary by manufacturer of your Wirele ss USB host adapter. 1. Make sure that the Wireless USB host[...]

27 Figure: Wireless VGA Adapter and TruLink Hub Connected Associated Certified Wirel ess USB Devices will appear as icons in the Wireless USB Manager. When the Certified Wireless USB Devices are connected, the icon will appear in color (Figure: Wireless VGA Adapter and TruLink Hub Connected). Note: You may rename or delete th e Wireless USB Device [...]

28 Figure: Discovery Mode Screen P IN A SSOCIATION P ROCEDURE PIN association steps: Examples/Fig ures shown used with the associat ion of the TruLink Wireless VGA Device Adapter when used with the TruLink Wireless USB Host Adapter. 1. Make sure your Wireles s VGA Device Adapter is powered on and your Wireless USB host adapter is connected to your [...]

29 Figure: Discovery Mode in Process Figure: Pin Association Entry 2. The Wireless USB host will search for the Wireless VGA Device Adapter within it s range. Note that this operation can take up to 20 seconds (Figure: Discovery Mode in Process). 3. Once the Wireless USB host adapter and the Wireless VGA Device Adapter have exchanged security infor[...]

30 4. Enter the PIN of the Wireless VGA Adapter (4-digi t PIN) and cli ck Accept A ssociation. The Wireless VGA Adapter and Wireless USB Host Adapter are now associated and ready for operation. P IN C HANGE P ROCEDURE The default PIN setting for the Wi reless VGA Device Adapter is “1234 ”. This section gives you the instructions to change the P[...]

31 3 . Make sure the WIRELESS/WIRED swit ch on your Wireless VGA Adapter is in the WIRELESS position and the power cable is plugged in your Wireless VGA Adapter. Connect t he USB cable between your Wireless VGA Adapter and any avai lable USB port on your computer. A PPENDIX[...]

32 4. Click Install this driver software anyway. 5. To change pin, click “Change PIN” A PPENDIX[...]

33 6. Enter a 4-Digit PIN (0-9) and click OK. 7. If your PIN is valid, a window displaying yo ur new PIN will appear. Press OK. Your PIN has been successfully changed. IMPORTANT: please exit the Trulink PI N Utility application (Exit button as shown on figure in step 5) bef ore unplugging the USB cable between your Wireless VGA Adapter and your PC.[...]

34[...]

35 For more information on this product or to check for updated drivers, manuals or frequently asked questions pleas e visit our website. www.cablestogo.com V ER . 1.0.2.8.10[...]