Canon LV-7325U manual

E English Multimedia Pr ojector Owner’ s Manual L V -7325U[...]

2 As the owner of a new Multimedia Projector, you are probably eager to try out your new projector. Before you do, we suggest that your spend a little time reading this manual to familiarize yourself with the operating procedures so that you will receive maximum satisfaction from the many features included in your new projector. This owner's m[...]

3 IMPOR T ANT SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Do not use attachments no[...]

4 T ABLE OF CONTENTS TRADEMARKS ● Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc. ● IBM and PS/2 are trademarks or registered trademarks of International Business Machines, Inc. ● Windows and PowerPoint are registered trademarks of Microsoft Corporation. ● Each name of corporations or products [...]

5 FEA TURES AND DESIGN This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆ Compatibility This projector is compatible with many different ty[...]

6 PREP ARA TION NAME OF EA CH P AR T OF THE PR OJECT OR These Air Intake Vents should not be blocked. BO TT OM OF THE CABINET B ACK OF THE CABINET CARRY HANDLE HOT AIR EXHAUSTED ! Air blown from the exhaust vent is hot. When using or installing the projector, following attention should be taken. ● Do not put a flammable object near this vent. ●[...]

7 PREP ARA TION ADJUST ABLE FEET Picture tilt and projection angle can be adjusted by rotating the ADJUSTABLE FEET. Projection angle can be adjusted to 10 degrees. Lift the front of the projector and pull the FEET LOCK LATCHES on both sides of the projector. 1 ADJUSTABLE FEET SETTING-UP THE PR OJECT OR FEET LOCK LATCHES Release the FEET LOCK LATCHE[...]

8 PREP ARA TION ● Do not cover the vent slot. ● Keep the rear grill at least 3 feet (1m) away from any object. ● Keep sides clear of any obstructions. Obstructions may block cooling air. This projector is equipped with cooling fans for protection from overheating. Pay attention to the following to ensure proper ventilation and avoid a possibl[...]

9 PREP ARA TION CA UTION IN CARR YING OR TRANSPOR TING THE PR OJECT OR ● Do not drop or bump the projector, otherwise damages or malfunctions may result. ● When transporting the projector, use a carrying case recommended by Canon. ● Do not transport the projector by using a courier or transport service in an unsuitable transport case. This ma[...]

10 CONNECTING THE PR OJECT OR TERMINALS OF THE PR OJECT OR S-VIDEO R-A UDIO-L (MONO) VIDEO A UDIO IN OUT CONTROL PORT COMPUTER IN MONITOR OUT Connect the computer output to this terminal. (Refer to P12, 13.) When controlling the computer with the Remote Control of this projector, connect the mouse port of your personal computer to this terminal. It[...]

S-VIDEO R-A UDIO-L (MONO) VIDEO A UDIO IN OUT CONTROL PORT COMPUTER IN MONITOR OUT 11 CONNECTING THE PR OJECT OR CONNECTING T O THE VIDEO EQ UIPMENT Video Source (example) Video Cassette Recorder Video Disc Player Video Audio Cable ✽ S-VIDEO Cable ✽ Audio Amplifier Audio Speaker (stereo) External Audio Equipment Audio Cable (Stereo) ✽ Termina[...]

12 CONNECTING THE PR OJECT OR ON 1 2 3 4 56 DIP CONNECTING T O THE COMPUTER To connect to the computer, refer to the figure below. IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA / SXGA) VGA Cable Monitor Output Desktop type Laptop type Monitor Audio Speaker (stereo) Audio Amplifier Control Cable for Serial Port ✽ Control Cable [...]

13 CONNECTING THE PR OJECT OR S-VIDEO R-A UDIO-L (MONO) VIDEO A UDIO IN OUT CONTROL POR T COMPUTER IN MONIT OR OUT ON 1 DIP ON OFF 23456 13" MODE (640 x 480) 16" MODE (832 x 624) 19" MODE (1024 x 768) OFF ON ON ON ON ON ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF 12 34 5 6 OFF OFF ON ON ON ON 21" MODE (1152 x 870) CONTROL POR[...]

14 BEFORE OPERA TION OPERA TION OF THE REMO TE CONTR OL V OLUME PO WER FOCUS ZOOM VIDEO COMPUTER/ MCI D.ZOOM MENU MUTE LASER KEYST ONE NO SHO W FREEZE A UTO IMA GE NORMAL PA G E Used to select source either COMPUTER or MCI mode. (P23) Used to select VIDEO source. (P30) Used to execute the item selected or to expand the image in DIGITAL ZOOM mode. ([...]

15 BEFORE OPERA TION V OLUME PO WER FOCUS ZOOM VIDEO COMPUTER/ MCI D.ZOOM MENU MUTE LASER KEYST ONE NO SHO W FREEZE A UTO IMA GE NORMAL PA G E To insure safe operation, please observe the following precautions : ● Use (2) AA type alkaline batteries. ● Replace two batteries at the same time. ● Do not use a new battery with a used battery. ● [...]

PO WER NORMAL MENU MODE A UTO IMA GE FOCUS ZOOM V OLUME P A GE LAMP REPLA CE W ARNING TEMP . READ Y LAMP WIDE TELE SELECT BRIGHT 16 BEFORE OPERA TION T OP CONTR OLS AND INDICA T ORS Used to open or close the MENU operation. (P17, 19) MENU BUTTON AUTO IMAGE BUTTON READY INDICATOR POWER ON–OFF BUTTON WARNING TEMP. INDICATOR LAMP INDICATOR LAMP REPL[...]

17 SELECT BEFORE OPERA TION HO W T O OPERA TE ON-SCREEN MENU FLO W OF ON-SCREEN MENU Display ON-SCREEN MENU Press MENU button to display the ON-SCREEN MENU (MENU BAR). The red frame is the POINTER. Select the ITEM by pressing SELECT button. The dialog box of the ITEM appears. Move the POINTER (red frame) to the ITEM ICON that you want to select by [...]

18 BEFORE OPERA TION MENU B AR IMAGE MENU Used to adjust the computer image. [Fine sync. / Total dots / White Balance / Contrast / Brightness] (Refer to P27) PC ADJUST MENU Used to adjust the parameters to match with the input signal format. (Refer to P24, 25) SETTING MENU Used to set the Display Menu and to reset Lamp Replacement Monitor Timer. (R[...]

19 B ASIC OPERA TION VIEW MENU Used to display, read or write the image data in a memory card through the PC CARD SLOT. (Refer to P34, 35) MODE MENU Used to select the MCI input mode. (Refer to P33) MENU BAR IN MCI MODE Press MENU BUTTON while in MCI mode. These icons have the same function as the Computer Mode. IMAGE MENU Used to adjust the comput[...]

20 B ASIC OPERA TIONS TURNING ON THE PR OJECT OR Connect the projector's AC power cord into a wall outlet. The LAMP indicator lights RED, and the READY indicator lights GREEN. Press the power ON-OFF button on the Remote Control Unit or on the Top Control to ON. The LAMP POWER indicator dims, and the Cooling Fans start to operate. The Preparati[...]

21 B ASIC OPERA TION ADJUSTING THE IMA GE The message disappears after 4 seconds. The message disappears after 4 seconds. ZOOM ADJUSTMENT 1 Press the ZOOM WIDE/TELE buttons on the Top Control or the ZOOM ▲ / ▼ button on the Remote Control Unit to turn into the ZOOM mode. 2 Press the ZOOM WIDE button or the ZOOM ▲ button to make the image larg[...]

22 B ASIC OPERA TION It indicates the level of the volume. Press the MUTE button to set the Mute function On or Off. The display disappears after 4 seconds. The message disappears after 4 seconds. No show Slide the BRIGHT SWITCH to the BRIGHTER position to enhance the picture brightness. When the BRIGHT SWITCH is set to the BRIGHTER position, the B[...]

23 COMPUTER / MCI button Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Computer and press the SELECT button. COMPUTER MODE SELECTING COMPUTER MODE DIRECT OPERA TION Select COMPUTER mode by pressing the MODE button on the Top Control or the COMPUTER / MCI button on the Remote Control Unit. MEN[...]

24 COMPUTER MODE PC ADJUSTMENT This Projector can automatically tune to the display signals from most personal computers currently distributed. However, some computers employ the special signal formats which are different from the standard ones and may not be tuned by Multiscanning of this projector. If this happens, the projector cannot reproduce [...]

25 COMPUTER MODE The number of the total vertical lines. Adjust the number to match the image of your personal computer. Total lines Recalls the parameter data that was previously adjusted. Reset Stores the parameters in the memory. Stored Clears the parameter data previously set . Mode free Closes the PC ADJUST Menu. Quit The number of the total d[...]

26 COMPUTER MODE COMP A TIBLE COMPUTER SPECIFICA TIONS Basically this projector can accept the signal from all computers with the V, H-Frequency mentioned below and less than 140 MHz of Dot Clock. NOTE : Specifications are subject to change without notice. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 720[...]

27 COMPUTER MODE PICTURE IMA GE ADJUSTMENT Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the item that you want to c[...]

28 COMPUTER MODE The Auto Image function is provided to automatically adjust Fine sync., Total dots, and Picture Position for most computers. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select AUTO IMAGE and press the SELECT button. Another dialog box AUTO IMAGE Menu will appear. Move the arrow to[...]

29 COMPUTER MODE PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the image in desirable size. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SCREEN and press the SELECT button. Another dialog box PICTURE SCREEN Menu will appear. 1 Mov[...]

30 VIDEO MODE Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Video and press the SELECT button. SELECTING VIDEO MODE DIRECT OPERA TION Select VIDEO mode by pressing the MODE button on the Top Control or the VIDEO button on the Remote Control Unit. MENU OPERA TION SELECTING COLOR SYSTEM Press t[...]

31 Each of the keys operates as follow. VIDEO MODE PICTURE IMA GE ADJUSTMENT Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the ar[...]

32 MCI MODE OPERA TING THE PC CARD SLO T This projector has a PC CARD SLOT and the data in a memory card (Compact Flash™ Card with PCMCIA Adapter or PC card) can be displayed just by inserting the card into it. It is unnecessary to connect with other input equipment. Media Card Imager (supplied with CD-ROM) can edit the image data and record it i[...]

33 MCI MODE Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select MCI and press the SELECT button. SELECTING MCI MODE DIRECT OPERA TION Select MCI mode by pressing the MODE button on the Top Control or the COMPUTER / MCI button on the Remote Control Unit. MENU OPERA TION COMPUTER / MCI button COMPUTE[...]

34 MCI MODE Move the arrow to each operation and press the SELECT button. SHO W THE D A T A IN THE MEMOR Y CARD B ASIC OPERA TION Pages in the Index Index Select the Index ● This projector can project only image data in Bit Map or in JPEG format or the data edited by Media Card Imager (supplied) through the PC CARD SLOT. Other data is not compati[...]

35 MCI MODE WRITE D A T A INT O THE MEMOR Y CARD A CCESS T O THE MEMOR Y CARD THR OUGH THE PROJECT OR If your computer doesn't have the PC card writing equipment, the data can be written or read by connecting with this projector. NOTE : This operation can be made only by Media Card Imager in the Personal Computer. The data edited by Media Card[...]

36 The position of the image can be adjusted vertically and horizontally through PICTURE POSITION ADJUSTMENT. MCI MODE PICTURE IMA GE ADJUSTMENT ADJUST THE PICTURE IMA GE MANU ALL Y The normal picture level is preset on this projector at the factory and can be restored anytime you press the NORMAL button (located on the Top Control or on the Remote[...]

37 MCI MODE PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the image in desirable size. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SCREEN and press the SELECT button. Another dialog box PICTURE SCREEN Menu will appear. To adjust [...]

38 MCI MODE CF CARD AND PCMCIA AD APTER IMPORT ANT NOTE Data stored on a CF card may be damaged or lost due to physical damage to the CF card or accidental erasure. It is recommended that any important data should be copied as a backup onto separate media, such as a floppy disk, a hard disk or a MO disk, etc. We shall not be liable for any damage o[...]

39 MCI MODE ● Do not turn the LCD projector or the computer power off or remove the CF card / PCMCIA adapter while the CF card is in access operation (storing, reading or deleting files). ● CF cards / PCMCIA adapters are high-precision electronic devices. do not bend, drop, apply strong forces or shock or place it where a strong static electric[...]

40 SETTING SETTING MENU Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SETTING and press the SELECT button. Another dialog box SETTING Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the item that you want to set, and then press the SELECT butt[...]

41 APPENDIX OPERA TING WIRELESS MOUSE INST ALLA TION The Wireless Remote Control Unit is not only able to operate the projector but also can be used as a wireless mouse for most Personal Computers. The POINT buttons and the two CLICK buttons are used for the wireless mouse operation. The wireless mouse is available only when PC mouse pointer is dis[...]

42 APPENDIX CLEANING THE PR OJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch the lens. When you are not using the projector, replace the lens cover. 1 3 Lightly wipe the cleaning cloth over the lens. 2 [...]

43 APPENDIX LAMP REPLA CEMENT INDICA T OR When the life of the Lamp of this projector draws to an end, the LAMP REPLACEMENT indicator lights red. When the image becomes dark or the color of the image becomes unnatural, replacement of the Lamp is required. Turn off the projector and disconnect the AC plug. Allow the projector to cool for at least 45[...]

44 APPENDIX TR OUBLESHOO TING Before calling your dealer or service station for assistance, check the items below once again. 1. Make sure you have connected the projector to your equipment as described in the section "CONNECTING THE PROJECTOR" on pages 10 ~ 13. 2. Check cable connection. Verify that all computer, video and power cord are[...]

45 APPENDIX W ARNING : High v oltages are used to operate this projector . Do not attempt to open the cabinet. Remote Control Unit does not work. ● Check the batteries. ● Check the ALL-OFF switch on the Remote Control Unit is set to “ON.”. ● Make sure nothing is between the Remote Receiver and the Remote Control Unit. ● Make sure you ar[...]

46 APPENDIX 0.9" TFT Active Matrix type, 3 panels TECHNICAL SPECIFICA TIONS Multi-media Projector 9.48 lbs (4.3 kg) 9.45" x 3.66" x 13.23" (240mm x 93mm x 336mm) (not including Adjustable Feet) 1024 x 768 dots 2,359,296 (1024 x 768 x 3 panels) PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N H-sync. 15 ~ 100 KHz, V-sync. 50 ~ 100 Hz [...]

47 APPENDIX OPTIONAL P ARTS The parts listed below are optionally supplied. When ordering those parts, give the name and the Type No. of it to the sales dealer. ● Control Cable for Serial Port Type No. : LV - CA26 ● Control Cable for ADB Port Type No. : LV - CA27 ● MAC Adapter Type No. : LV - AD02 ● Canon Digitizer Type No. : LV - DP10[...]

1AA6P1P2169-- (MB6S) CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, T okyo 146-8501, J apan CANON U .S.A., INC. NEW Y ORK OFFICE One Canon Plaza, Lake Success , NY 11042-1198, U .S .A. phone : 516-328-5960 CANON U .S.A., INC. LOS ANGELES OFFICE 15955 Alton P ar kwa y , irvine, CA 92718-3616, U .S.A. phone : 949-753-4320 CANON CANAD A, INC. 6390 Dix[...]