Casio KL-100 manual

KL-100 User’ s Guide[...]

E-1 AC adaptor • Do not allow the power cord to become damaged or broken, and ne ver modify , over bend, twist, or pull it. Ne v er place heavy objects on the pow er cord, and nev er expose it to direct heat. A damaged power cord creates the danger of fire and electrical shock. • Use only the A C adaptor specified for this unit (optional AD-A95[...]

E-2 Location • A void lea ving the unit in areas subjected to high humidity and large amounts of dust. Such conditions create the danger of fire and elec- trical shock. • A void lea ving the unit on a kitchen tab le, ne xt to a humidifier , or in any other area where it might come into contact with oil vapors or steam. Such conditions create th[...]

E-3 Introduction Congratulations on y our selection of the CASIO KL-100 Label Printer . This CASIO Label Printer makes it possible for you to print adhesive labels for a wide variety of applications, such as: name tags, cassette tape labels, floppy disks, binders, and other applications. Y ou can produce attractiv e, original labels thanks to such [...]

E-4 Part 5 Character Size, T ext Eff ects and Character Styles ..... 12 Character Size .............................................................................................. 12 T o change the character size ................................................................ 12 T ext Eff ects ....................................................[...]

E-5 General Guide Using a Strap Y ou can attach a strap to the Label Printer as shown in the illustration. T o remove the strap , rev erse the procedure shown in the illustration. • Be sure to always hold on to the Label Printer itself when carrying it. Never allow the Label Printer to hang or swing from the strap. Doing so creates the danger of [...]

E-6 Replacing Batteries A handy low battery power indicator lets you know when battery power is get- ting too low f or proper operation. The message “ BA TT ” appears on the displa y if battery power is low when you perform any of the following operations. • T ur n pow er on • Execute a print operation Whenev er the “ BA TT ” message ap[...]

E-7 INT? T urning Po wer On and Off Press ON to turn power on, and OFF to turn power off . Important! • If you are using the Label Printer for the first time, you should reset it first. Resetting the Memory Y ou should reset the memor y of the Label Printer bef ore using it f or the first time, after you have not used it for a long time, or if no[...]

E-8 (a) (b) 4. Use a pencil or some other thin object to take up slack in the ink ribbon as shown in the illus- tration. Note that the tape does not move at this time. • If the ink ribbon is slack when you load it into the Label Printer , it can break or cause some other problem. • Be sure to turn the ink ribbon take up spool only in the direct[...]

E-9 • Shift indicator This indicator appears when you press the SHIFT k e y . While this indicator is on the displa y , the ke yboard is shifted, so the letter k eys input upper-case alpha characters. The number k eys input the punctuation symbols mark ed in the up- per right corners of the keys. If both the caps mode indicator and the shift indi[...]

E-10 .: ; , • Manual feed indicator This indicator appears when you are using manual feed instead of auto feed. Auto f eed is in effect when this indicator is not on the displa y . Important! • After you finish printing when using manual feed, be sure to always press FUNCTION and then PRINT (FEED) to feed the tape before cutting it. If you don?[...]

E-11 IO # pute 3. After you underline the symbol you want, press SET . • This returns to the input screen, with the symbol you selected input at the location where the cur- sor was located when you displayed the symbol list. Part 4 Deleting and Inserting Characters This section describes everything you need to know about deleting and editing char[...]

E-12 JUST Character Size Indicator Actual Size (mm) 1 × 13 × 3 1 × 23 × 6 1 × 33 × 9 2 × 16 × 3 2 × 26 × 6 2 × 36 × 9 Initial Size Size After B B B B B Operation JUST 1 × 1 2 × 11 × 1 2 × 21 × 2 2 × 31 × 3 Initial Size Size After Delete of B B B B B JUST 2 × 2 2. Input the new characters (XYZ). • Inputting the new characters c[...]

E-13 XYZ Outline Normal Shadow Raised 4. When the character size you want to specify is on the display , press SET to select it and retur n to the text displa y . Note • Y ou could also perform the abov e procedure in re verse, specifying the char- acter size first and then inputting the text. T ext Effects There are three te xt effects that y ou[...]

E-14 T ype ST -15 Example Maximum Stamp Size 5.5cm T ape Backing XYZ 3. Use H and J to move the cursor to the style you want to use. 4. When the cursor is located under the style you want to specify , press SET to select it and re- turn to the text displa y . Note • Y ou could also perform the abov e procedure in re verse, specifying the char- ac[...]

E-15 J OFF 1 3 2 T o print a stamp tape 1. Input the text you want to print. 2. Press FUNCTION and then 7 (ST AMP). • A mark appears next to the ST AMP indicator on the display when mirror print- ing is turned on. • If the text you input in step 1 is too long to fit within the maximum length you specified, an error message (page 21) appears whe[...]

E-16 J NO 1234 STR? OK EFG Auto Feed Y ou can turn the Label Pr inter ’ s auto feed f eature on and off . When auto f eed is on, the Label Printer automatically feeds the tape about 17.1mm at the begin- ning and end of each print operation. This creates identical margins on both sides of your text. Important! • After you finish printing when us[...]

E-17 CAL? ABCD CASI Area 2 text Area 1 text CASI ABCD Area 1 text OK? DEL? T o recall text fr om memor y Example: T o recall the contents of Area 2 while memory contains the following text. Area 1: ABCDEFG Area 2: CASIO 1. While the input screen is on the display , press FUNCTION and then 1 (MEMO). • Note that text recalled from memory will repla[...]

E-18 Item Power On SIZE JUST (2 × 2) EFFECT CANCEL STYLE NORMAL MIRROR OFF M-FEED NO 6mm OFF INT? Part 8 Reference This section contains information about the Label Printer that you can use as reference when you need it. Cleaning the Printer Head and Roller A dir ty printer head and roller can result in poor printing quality . If you hav e problem[...]

E-19 Item Display Memory SYMBOL EFFECT STYLE M-FEED MIRROR MEMO DENSITY 6 mm Reset Cleared Cleared , CANCEL NORMAL NO OFF STR? 3 OFF Back cover is not closed completely . No more tape left in the cartridge. T ape jam Securely close the back co ver . Replace the tape cartridge with a new one. Remove the tape cartridge and pull out the jammed tape b [...]

E-20 Remove the ink ribbon cassette and check to make sure the ink ribbon is not broken. Next, take up any slack in the ink ribbon and then reload the tape cartridge. Important! • Before loading an ink ribbon cassette into the label printer , alwa ys make sure y ou take up any slack in the ink ribbon first. • If the ink ribbon is broken, you mu[...]

E-21 Message ERR! * This message appears on the screen for about one second. FUL! * This message appears on the screen for about one second. BA TT ERR! Possible Causes • Attempt to input two B marks within the same text. • Attempt to input B mark while 6mm is specified as the tape width. • Label text containing a B mark was input and then tap[...]

E-22 Specifications Model: KL-100 Input K eyboard La yout: T ypewriter (QWER TY) Character T ypes Alpha (English and other languages): 64 Numbers: 10 Symbols: 41 Display T ype: Liquid crystal display Columns: 4 Character matrix: 5 × 7-dot Printing T ype: Thermal transfer Speed: Approximately 6.76mm/second Width: 4mm (6mm tape) or 8mm (9mm, 12mm an[...]

CASIO COMPUTER CO., LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan[...]