Cisco Systems IE301024TC manual

Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco IE 30 1 0 S witc h Hardwa re Installation Guide Revised Octo ber 12, 20 12 Text Part Number: 78 -19581-02[...]

THE SPECIFICATION S AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITH OUT NOTICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED. USERS MUST TAKE FULL RESPO NSIBILITY FOR THEIR APPLICATION OF ANY PRO[...]

iii Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 CONTENTS Preface vii Related Publication s i-viii Obtaining Documentation and Submitting a Serv ice Request i-viii CHAPTER 1 Product Overview 1-1 Switch Mode ls 1-1 Cable Side 1-2 10/100 Fast Etherne t Ports 1-3 PoE Ports 1-3 Dual-Purpose Ports 1-4 SFP Modules 1-5 SFP Module Patch Cab[...]

Contents iv Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 CHAPTER 2 Switch Installation 2-1 Warnings 2-1 Installation Guidelines 2-3 Verifying Switch Operation 2-3 Installing the Switch 2-4 Rack-Mounting 2-4 Attaching Brackets fo r 19-Inch Racks 2-5 Attaching Brackets for 19-Inch Racks for IP-30 Compliance (Optional) 2-6 Attaching Br[...]

Contents v Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 CHAPTER 4 Troubleshooting 4-1 Diagnosing Problems 4-1 Switch POST Results 4-1 Switch LEDs 4-2 Switch Connections 4-2 Bad or Damaged Ca ble 4-2 Ethernet and Fib er-Optic Cables 4-2 Link Status 4-2 10/100 and 10/100/1000 Po rt Connections 4-3 10/100 PoE Port Connectio ns 4-3 SFP [...]

Contents vi Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 APPENDIX C Configuring the Switch with the CLI Setup Program C-1 Accessing the CLI Through the Console Port C-1 RJ-45 Console Port C-1 USB Console Port C-3 Installing the Cisco Microsoft Windows USB Device Drivers C-4 Installing the Cisco Microsoft Windows XP USB Driver C-4 In[...]

vii Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Preface This guide descri bes the hardware features o f the Cisc o Industrial Ethernet (IE) 30 10 switch. It describes the physical an d performance characteristics of the switch, e xplains ho w to install it, and provides troubleshooting i nformation. This guide does n ot describe sy[...]

viii Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Preface Related Publications The safety warnings for this product are translat ed into se veral lang uages in the Re gu latory Compliance and Safety Information for the Cisco IE 3010 Switc h that ships with the p roduct on the documentation CD. The EMC regulatory statements ar e also[...]

CH A P T E R 1-1 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 1 Product Overview The Cisco IE 3010 switch pro vides a rugged and secu re switching infrastructure fo r harsh en vironments. It is suitable for industrial Et hernet applicati ons, including process manu facturing, intelligent transportation systems (ITSs), rail transpor [...]

1-2 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 1 Product Overview Cable Side Cable Side The 10/100 F ast Ethernet do wnlink ports in Fi gure 1-1 are grouped in pairs. The first member of the pair (port 1) is abov e the second member (port 2) on the left. Port 3 is abov e port 4, and so on. The dual-purpose po rts are numbe[...]

1-3 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 1 Product Overvie w Cable Side The100B ASE-FX SFP ports and the 10/100 PoE ports are grouped in pairs. The f irst member of the pair (port 1) is abov e the second member (port 2) on the left. Port 3 is abov e port 4, and so on. The dual-purpose port s are numbered 1 and 2. Fig[...]

1-4 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 1 Product Overview Cable Side The 10/100 PoE por ts on the Cisco IE-3010-16S-8PC switches pro v ide PoE support for de vices that are compliant with IEEE 802.3 af. The Cisco prestandard PoE i s also supported for Ci sco IP Phones and Cisco Aironet Access Points. The PoE ports [...]

1-5 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 1 Product Overvie w Cable Side SFP Modules The switch Ethernet SFP modules provide connecti ons to other de vices. These field-replaceable transceiv er modules provide the uplink interfaces.T he modules have LC connectors for f iber-optic connections or RJ-45 con nectors for c[...]

1-6 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 1 Product Overview Cable Side SFP Module Patch Cable The switch uses an SFP-module patch cable, a 0. 5-meter , copper , passi ve cable with SFP module connectors at each end (see Figure 1-3 ). The patch c able connects tw o switches in a cascaded configuration. Figure 1 -3 SFP[...]

1-7 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 1 Product Overvie w Cable Side Alarm Input The alarm input is a dry-contact alarm port. Y ou can connect up t o four alarm inputs from de vices, such as a door , a temperature gauge, or a f ire alarm, to the alarm port. Y o u can use the CLI to set the alarm se verity to minor[...]

1-8 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 1 Product Overview Cable Side LEDs Y o u can use the switch system and port LEDs to monitor swit ch acti vity and performa nce. Switch Panel LEDs Figur e 1 -6 Switch LEDs (Cable Side) 1 SYS (system) 9 OUT (alarm output) 2 CON (RJ-45 console) 10 PSU1 (po wer supply 1) 3 USB (mi[...]

1-9 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 1 Product Overvie w Cable Side System LED Power-Supply Module LEDs The switch po wer-supply module LEDs are labele d PSU1 and PSU2 (on the sw itch) and PSU OK (on the power -supply mod ule). They show whether power - supply modules 1 and 2 ar e recei ving po wer . See Figure 1[...]

1-10 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 1 Product Overview Cable Side Console LEDs The console LEDs show which console port is in use. See Figure 1-6 and Figure 1-9 for the LED locations. If you connect a cable to a co nsole port, the sw itch automatically uses that port for console communication. If you conn ect t[...]

1-11 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 1 Product Overvie w Cable Side PoE LED Dual-Purpose Port LEDs The dual-purpose port LEDs id entify the connection as either a copper -based connector or an SFP module. The ports can au tonegotiate, o r you can ma nually configure each dual- purpose port as eith er 10/100/1000[...]

1-12 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 1 Product Overview Power-Supply Side Power-Supply Side The power -supply sid e has the LED pane l and two power -supply slot s for the removable po wer supplies. See Figure 1-7 and Figure 1-8 . Figur e 1 -7 Switch with On e P ow e r -Supply Module Figur e 1 -8 Switch with Bo [...]

1-13 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 1 Product Overvie w Power-Supply Side Power-Supply Side LEDs Figur e 1 -9 Switch LEDs 1 SYS (system) 9 OUT (alar m output) 2 CON (console) 10 PSU1 (power supply 1) 3 USB LED 11 PSU2 (power supply 2) 4 SD (SD flash memory card) 12 PoE 1 1. Only on the C isco IE-3010-16S-8PC sw[...]

1-14 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 1 Product Overview Management Options Power Supply Features The switch has two slo ts for po wer-supply mo dules: • PWR-RGD-LO W -DC/IA: lo w-vol tage DC (for v oltage information, see Ta b l e A - 6 ) • PWR-RGD-A C-DC/IA: high-voltage A C or DC (for voltage i nformation,[...]

CH A P T E R 2-1 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 2 Switch Installation Read the topics and perform th e procedures in this order: • W arnings, pa ge 2-1 • Installation Guidelines, p age 2-3 • V eri fying Switch Operati on, page 2-3 • Installing the Swit ch, page 2-4 • Installing and Removing SFP Modules, page [...]

2-2 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installatio n Warnings War ni ng This equipment must be grounded. Never de feat the ground conductor or operate the equipment in the absence of a suita bly installed ground conductor . Contact the appropri ate electrical inspection authority or an electrician if you a[...]

2-3 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installation Installation Guidelines Installation Guidelines Before installing the switch, v eri fy that these gui delines are met: • Cabling is a way from sources of elec trical noise, su ch as radios, po wer lines, and fluorescen t lighting f ixtures. Make sure th[...]

2-4 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installatio n Installing the Switch Installing the Switch • Rack-Mounting, page 2- 4 • W all-Mounting, page 2-15 Note If the switch is wall-mo unted in an en closure, follow these minimum clearances: - Sides of switch (f acing up and facing do wn): 3.75 in. (9.52 [...]

2-5 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installation Installing the Switch Attaching Brackets for 19-Inch Racks Figure 2-1 and Figu re 2-2 sho w how t o attach brackets to the switch es. Figur e 2-1 Attac hing Brack ets for 19-Inc h Racks 1 Mid-mounting po sition 3 Cable-side mounting p osition 2 Phillips f[...]

2-6 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installatio n Installing the Switch Figur e 2-2 Attac hing Brack ets for 19-Inc h Racks Attaching Brackets for 19-Inch Racks for IP-30 Compliance (Optional) Before installing the mounti ng brackets, you need to inst all the rubber plugs in the u nused mounting holes. [...]

2-7 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installation Installing the Switch Figure 2-3 Inserting the Rubber Plug Step 1 Identify your b racket mounti ng position. See Figur e 2-6 or Figure 2-7 . Step 2 Insert the rubber plugs in the appropriate holes. See Figure 2-4 or Figure 2-5 . Follo w the same procedure[...]

2-8 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installatio n Installing the Switch Figur e 2-4 Inserting the Rubber Plugs 1 Rubber pl ug 3 Cable-side mounting position 2 Mid-mounting po sition 4 Po wer-supp ly-side mounting positio n 255739 1 2 1 3 1 4[...]

2-9 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installation Installing the Switch Figur e 2-5 Inserting the Rubber Plugs 1 Rubber plug 3 Power -supply-side mounting posi tion 2 Cable-side-mounting po sition Ci sco CG S 2520 255740 1 2 1 3[...]

2-10 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installatio n Installing the Switch Figur e 2-6 Attac hing Brack ets for 19-Inc h Racks 1 Mid-mounting po sition 3 Cable-side mounting position 2 Phillips flat-head scre ws 4 Po wer-supply-si de mounting position 255750 1 2 3 4 2 2[...]

2-11 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installation Installing the Switch Figur e 2-7 Attac hing Brack ets for 19-Inc h Racks Note For IP-30 compli ance: If you use 23-inch brack ets or ETSI brackets, you can insert the rubber plugs in the same holes as sho wn in Figure 2-4 or Figure 2 -5 before installin[...]

2-12 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installatio n Installing the Switch Attaching Brackets for 23-Inch Racks Figur e 2-8 Attac hing 23-Inch Brac kets Note For IP-30 complian ce: If you use 23-inch brackets, you can insert the rubber plugs in the same holes as sho wn in Figure 2-4 or Figure 2 -5 before [...]

2-13 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installation Installing the Switch Attaching Brackets for ETSI Racks Figur e 2-9 Attac hing Brack ets for ETSI Racks Note For IP-30 co mpliance: If you use ETSI brack ets, you can insert the rubber pl ugs in the same holes as sho wn in Figure 2-4 or Figure 2-5 before[...]

2-14 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installatio n Installing the Switch Rack-Mounting the Switch After you attach th e brackets on the switch, use the four supplied number -12 Phillips machine scre ws to attach the brackets to the rack. See Figure 2-10 . Figure 2-1 0 Rack-Mounting 1 Mid-mounting po sit[...]

2-15 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installation Installing the Switch After the switch is mounted in the rack: • W ire the switch to a power source. See Chapter 3, “Power Sup ply Installation. ” • Connect the ports. See the “Connecting Devi ces to the Ethernet Ports” section on page 2 -25 [...]

2-16 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installatio n Installing the Switch Attaching Brackets Figur e 2-1 1 Attaching 1 9-inch Rack Br ack ets Attaching Brackets for IP-30 Compliance (Optional) Step 1 Insert the r ubber plugs in the appropriate holes. See Figure 2-12 . Follo w the same proc edure on the o[...]

2-17 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installation Installing the Switch Figure 2-12 Inserting the Rubber Plugs in the S witch Holes Figur e 2-13 Attac h ing 19 -inch Rac k Brac kets 1 Rubber plug 2 Switch-side Ci sco Sw i t ch Ser i es I E 3010 255741 1 2 1 Phillips truss-head scre ws Ci sco Sw i t ch S[...]

2-18 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installatio n Installing the Switch Wall-Mounting the Switch For the best sup port of the switch and cables, mak e sure that the switch is attached securely to w all studs or to a f i rmly attached plyw ood mounting backboard . Mount the switch with t he side panel f[...]

2-19 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installation Installing the Switch Figur e 2-15 W all-Mounting the Cisco IE-30 1 0-16S-8PC After the switch is mounted on the wa ll: • W ire the switch to a power source. See Chapter 3, “Power Sup ply Installation. ” • For conf iguration instructions about us[...]

2-20 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installatio n Installing and Remo ving SFP Modules Installing and Removing SFP Modules Installing SFP Modules When installing SFP modules, observe these guidel ines: • Removing and installing an SFP modul e can shorten its useful life. Do not remov e and insert any[...]

2-21 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installation Inserting and Removing the SFP Mo dule Patch Cable Removing SFP Modules Step 1 Attach an ESD-pre venti ve wrist strap to your wrist and to a bare metal surf ace. Step 2 Disconnect the cable from the SFP module. For reat tach ment, note which cable connec[...]

2-22 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installatio n Inserting and Removing the SFP Module Patch Cable Figure 2-1 8 Inserting an SF P Module Patc h Cable Step 3 Repeat these steps for the second switch that you want to connect to the f irst switch. Figur e 2-19 Connecti ng T wo S witches with an SFP Mod u[...]

2-23 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installation Replacing the SD Flash Me mory Card Replacing the SD Flash Memory Card Step 1 Locate the SD flash memory card slot on the cable-side of the switch. Step 2 Use a number- 1 Phillips scre wdri ver to loo sen the capti ve scre w . See Figure 2-20 . Figur e 2[...]

2-24 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installatio n Replacing the SD Flash Memor y Card Step 4 Gently push the SD flash memory car d to eject it. See Figure 2-22 . Place it in an antistatic bag to protect it from static dischar ge. Figur e 2-22 Removing th e SD Flash Memory Card . Step 5 Push the replace[...]

2-25 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installation Connecting De vices to the Ethernet Ports Connecting Devices to the Ethernet Ports • Connecting to the 10/10 0 and 10/100/1000 Ports, page 2- 25 • Connecting to the 10/10 0 PoE Ports, page 2-26 Connecting to the 10/100 and 10/100/1000 Ports The 10/10[...]

2-26 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installatio n Connecting Devices to the Eth ernet Ports Connecting to the 10/100 PoE Ports The Cisco IE-3010-16S-8PC switch 10/1 00 PoE ports ha ve the same au tonegotiat ion settings and cabling requirements as t hose in the “Connecting to the 10 /100 and 10/100/1[...]

2-27 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installation Where to Go Next Where to Go Next Y ou can use the default conf iguration or use an y of the management options described in the “Management Options” section on pa ge 1-14 to change the switch setting s.[...]

2-28 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 2 Switch Installatio n Where to Go Ne xt[...]

CH A P T E R 3-1 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 3 Power Supply Installation This chapter describes ho w to remov e and install a ne w or replacement po wer supply . Y our switch ships with at least one i nstalled po wer-su pply module (A C or DC, depending on your order). The power -supply modules are f ield-repla ceab[...]

3-2 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 3 Powe r Supply Installation Power-Supply Modules Figur e 3-1 PWR-RGD-A C-DC/IA Po wer -Supply Module Figur e 3-2 PWR-RGD-L OW -DC/IA P ower -Supp ly Module For a description of the PSU OK LEDs, see the “Po wer-Supply Module LEDs” sect ion on page 1-9 . 1 Power -supply mo [...]

3-3 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 3 Power Supply Installation Power-Supply Module Installation Power-Supply Module Installation • Installation Guidelines, p age 3-3 • Installing a Po wer-Supply Mo dule, page 3-4 • W iring the Power Source, page 3- 7 • Removing the Po wer-Sup ply Module, page 3-12 Insta[...]

3-4 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 3 Powe r Supply Installation Power-Supply Modu le Installation Installing a Power-Supply Module This procedure is for instal ling a po wer-supp ly module in the PSU1 or PSU2 sl ot. War ni ng The covers are an integral part of the safety design of the prod uct. Do not operate t[...]

3-5 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 3 Power Supply Installation Power-Supply Module Installation War ni n g This equipment must be grounde d. Never defeat the ground conductor or operate the eq uipment in the absence of a suita bly installed ground conductor . Contact the appropriate el ectrical inspection autho[...]

3-6 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 3 Powe r Supply Installation Power-Supply Modu le Installation Figur e 3-4 Cr imping the T er m inal Lug Step 4 Slide the ground scre w from Step 1 through the terminal lug. Insert the ground screw s into the opening on the cable side. Figur e 3-5 Attac hing the T erminal Lug [...]

3-7 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 3 Power Supply Installation Power-Supply Module Installation Figur e 3-6 Loosen the Scr ews on the P ower Supply Blank Figur e 3-7 Remov e the Po wer Supply Blank Step 3 Insert the po wer-supply module into the slot, and gently push it in. See Figure 3-8 . The power -supply mo[...]

3-8 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 3 Powe r Supply Installation Power-Supply Modu le Installation War ni ng This product relies on the building’ s installation for short-circuit (overcurrent) protection. Ensu re that the protective device is rated not greater than: AC: 5 A, DC: 15 A Statement 1005 War ni ng A[...]

3-9 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 3 Power Supply Installation Power-Supply Module Installation Figur e 3-1 0 P ower -Input T erminal Note The pow er-supply mod ule 1 connection is labeled PSU 1, and the po wer-suppl y module 2 connection is labeled PSU2. Make sure that you connect the wires to t he correct ter[...]

3-10 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 3 Powe r Supply Installation Power-Supply Modu le Installation Figur e 3-1 1 Str ipping the Inpu t P ower Sour ce Wire Step 5 Insert the wire into a spade terminal, an d crimp it to the wire. Y ou can also us e a ring or flanged spade terminal as listed in the “Equipment Th[...]

3-11 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 3 Power Supply Installation Power-Supply Module Installation Figur e 3-13 Connecting the Wir es to the High-V oltage A C P ow er (PSU1) T o connect the DC po wer: a. Connect the positi ve wire into the terminal scre w labeled + , and the negati ve wire into the terminal scr e[...]

3-12 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 3 Powe r Supply Installation Removing the Power-Supply Modu le Step 8 T orque the captive scre ws (above the wires) to 8.5 in-lb ( ± 0.5 in-lb). Step 9 A C power Connect the other end of the lin e wire (the one connected to L ) to the line terminal on the A C-power source, a[...]

3-13 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 3 Power Supply Installation Removing the Power-Sup ply Module Step 4 Remov e the po wer -supply module from the po wer slot. The power -supply module migh t be hot. See Figure 3-16 . Step 5 Install a ne w po wer-su pply module or a blank co ver . Figur e 3-16 Removing th e Po[...]

3-14 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 3 Powe r Supply Installation Removing the Power-Supply Modu le[...]

CH A P T E R 4-1 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 4 Troubleshooting • Diagnosing Problems, page 4-1 • Resetting the Switch to the F actory Default Settings, page 4-5 • Finding the Switch Serial Numb er , page 4-5 Diagnosing Problems The switch LEDs pro vide troubleshooting informati on about the switch. The y sho w[...]

4-2 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 4 Tro ubleshooting Diagnosing Prob lems Switch LEDs Look at the port LEDs information when troubleshooting the switch. See the “LEDs” section on page 1-8 for a description of the LED colo rs and their meanings. Switch Connections Bad or Damaged Cable Always e xamine the ca[...]

4-3 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 4 Troubleshooting Diagnosing Problems 10/100 and 10/100/100 0 Port Connections A port appears to malfun ction: • V erify the status of all po rts. See T able 1-8 on page 1-10 f or descriptions of the LEDs and their meanings. • Use the show interfaces pri vileged EXEC comma[...]

4-4 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 4 Tro ubleshooting Diagnosing Prob lems Spanning Tree Loops STP loops can cause serious perfor mance issues that look lik e port or interface pr oblems. A unidirectional link can cause loops. It occurs when the traf fic sent b y the switch is receiv ed by the neighbor , but th[...]

4-5 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 4 Troubleshooting Resetting the Switch to th e Factory Default Settings Resetting the Switch to the Factory Default Settings Follo w these steps to return your switch to the factory def ault settings. Note Resetting the switch deletes the configurati on and reboots the switch.[...]

4-6 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Chapter 4 Tro ubleshooting Finding the Swit ch Serial Number Figur e 4-2 Ser ial Numb er Location for the P ower -Supply Modules S N: XXXNNNNXXXX 207452[...]

A-1 Cisco IE 3010 Switch Hardwa re Installation Guide 78-19581-02 APPENDIX A Technical Specifications • Switch Specifications • Po wer-Supp ly Module Specif ications • Alarm Ratings Switch Specifications T able A -1 Environmental and Ph ysical Specifications Environmental Ranges Operating temperature –40 to 140°F (–40 to 60°C) 1 1. The [...]

A-2 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Appendix A Technical Specific ations Switch Specifications T able A -2 T echnical Specifications fo r the Cisco IE 30 1 0-16S-8PC Switc h Power Requirements Nominal input v oltage PWR-RGD-A C-DC/IA: 100 to 240 V AC, 50 to 60 Hz 100 to 250 VDC PWR-RGD-LO W -DC/IA: 24 to 60 VDC Absolute[...]

A-3 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Appendix A Technical Specifications Switch Spec ifications Pow er consumption with two PWR-RGD-LO W -DC/IA po wer-supp ly modules DC: 127 BTUs per hour 37.1 W Pow er rating: 0.037 KV A@24 VDC Pow er consumption with two PWR-RGD-LO W -DC/IA po wer-supp ly modules (with PoE on 8 ports) [...]

A-4 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Appendix A Technical Specific ations Power-Supply Modu le Specifications Power-Supply Module Specifications T able A -4 En vir onmental and Ph ysical Specif ications f or the AC- and DC-P ower -Supply Modules Environmental Ranges Operating temperatu re –40 to 140°F (–40 to 6 0°C[...]

A-5 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Appendix A Technical Specifications Alarm Ratings Alarm Ratings T able A -7 Alar m Input and Output Ratings Alarm Ratings Alarm in put electr ical specification 8 V @ 1mA Alarm output electrical specification 30 V @ 1A Note The alarm outpu t does not support A C voltage because the RJ[...]

A-6 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Appendix A Technical Specific ations Alarm Ratings[...]

B-1 Cisco IE 3010 Switch Hardwa re Installation Guide 78-19581-02 APPENDIX B Connector and Cab le Specifications • Connector Specif ications, page B-1 • Cables and Adap ters, page B-4 Connector Specifications • 10/100, page B-1 • SFP Module Connectors, page B-2 • Dual-Purpose Ports, page B-3 • Alarm Port, page B-3 10/100 The 10/100 Ethe[...]

B-2 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Appendix B Connec tor and Cable Specific ations Connector Specifications When connecting 10/100 ports to de vices such as servers, workstati ons, and routers, you can use a two or four twisted-pair str aight-through cable wired for 1 0B ASE-T and 100B ASE-TX. Figure B-5 sho ws the two[...]

B-3 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Appendix B Connector and Cable Specifications Connector Specifications Dual-Purpose Ports The 10/100/1000 Ethernet p orts on the dual-purpose ports u se RJ-45 connectors. Figure B-3 1 0/1 0 0/1 0 00 P ort Pinouts Alarm Port The alarm port uses an RJ-45 connector . See the “ Alarm Po[...]

B-4 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Appendix B Connec tor and Cable Specific ations Cables and Adapters Cables and Adapters • SFP Module Cables, page B-4 • Cable Pinouts, page B-6 • Console Port Adapter Pinout s, page B-7 SFP Module Cables Each port must match the w av e-length specif icati ons on each end of the [...]

B-5 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Appendix B Connector and Cable Specifications Cables and Adapters Note When the fiber -optic cable span is less than 15.43 miles (25 km), insert a 5-decibel (dB) or 10-dB in line optical attenuator between the fi ber-optic cable plant and the recei ving port on th e 1000B ASE-ZX SFP m[...]

B-6 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Appendix B Connec tor and Cable Specific ations Cables and Adapters Cable Pinouts Figure B-5 T wo T wisted-P air St raight-Thr ough Cabl e Schematic for 1 0/ 1 00 P orts Figure B-6 T wo T wist ed-Pair Cr ossov er Cable Schematic for 1 0/1 0 0 Por ts Figur e B-7 Four T wist ed-P air St[...]

B-7 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Appendix B Connector and Cable Specifications Cables and Adapters T o identify a crosso ver cable, hold the cable ends side-b y-side, with the tab at the back. The wire connected t o pin 1 on the left end shoul d be the same color as the wire co nnected to pin 3 on the rig ht end. The[...]

B-8 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Appendix B Connec tor and Cable Specific ations Cables and Adapters T able B-3 Co nsole P ort Signal ing Using a DB-25 A dapter Switch Console Port (DTE) RJ-45-to-DB-25 Adapter Console Device Signal DB-25 Pin Signal RT S 5 CTS DTR 6 DSR TxD 3 RxD GND 7 GND RxD 2 TxD DSR 20 DTR CTS 4 R[...]

C-1 Cisco IE 3010 Switch Hardwa re Installation Guide 78-19581-02 APPENDIX C Configuring the Switch with the CLI Setup Program This appendix provides a command-line interface (CL I) setup procedure for a standalone sw itch. T o set up the switch b y using Express Setup, see the Cisco IE 3010 Switc h Getting Started Guide . Before connecting the swi[...]

C-2 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Appendix C Con figuring the Switch w ith the CLI Setu p Program Accessing the CLI Throug h the Console Port Figure C-1 Connecting the Cons ole Cable Step 3 Configure the baud rate and character format of the PC or terminal to match th e console port characteristics: • 9600 baud • [...]

C-3 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Appendix C Configuring t he Switch with the CLI Setup Program Accessing the CLI Through the Console Port USB Console Port Step 1 If you are con necting the sw itch USB consol e port to a W indo ws-based PC for th e fir st time, install a USB driv er . See Figure C-2 . • “Installin[...]

C-4 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Appendix C Con figuring the Switch w ith the CLI Setu p Program Accessing the CLI Throug h the Console Port Step 5 Config ure the COM port. Step 6 Configure the baud rate and character format of the PC or terminal to match th e console port characteristics: • 9600 baud • 8 data bi[...]

C-5 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Appendix C Configuring t he Switch with the CLI Setup Program Accessing the CLI Through the Console Port Step 5 The InstallShield W i zard Comp leted windo w appears. Click Finish. Step 6 Connect the USB cable to the PC and to the switch console port. The USB console port LED turns g [...]

C-6 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Appendix C Con figuring the Switch w ith the CLI Setu p Program Accessing the CLI Throug h the Console Port Using the Setup.exe Program Note Disconnect the switch console termin al before uninstalling the driv er . Step 1 Run setup.ex e for W indows 32-bit or setu p(x64).ex e for W in[...]

C-7 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Appendix C Configuring t he Switch with the CLI Setup Program Entering the Initial Configuration Information Entering the Initial Configuration Information T o set up the switch, you need to complete the setup progr am, which runs automat ically after the switch powers on. Y ou mu st [...]

C-8 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Appendix C Con figuring the Switch w ith the CLI Setu p Program Entering the Initial Con figuration Information Step 5 Enter a virtual terminal ( T elnet) password, and press Return . The password can be from 1 to 25 alph anumeric characters, is case sens iti ve, allo ws spaces, but i[...]

C-9 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Appendix C Configuring t he Switch with the CLI Setup Program Entering the Initial Configuration Information Step 10 These choices appear: [0] Go to the IOS command prompt without saving this config. [1] Return back to the setup without saving this config. [2] Save this configuration [...]

C-10 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 Appendix C Con figuring the Switch w ith the CLI Setu p Program Entering the Initial Con figuration Information[...]

IN-1 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 INDEX Numerics 10/100/1000 p orts 1-11, B-3 cable lengths 2-25 connecting to 2-25 recommended cables 2-26 10/100 po rts described 1-3 10/100 ports PoE 1-4 A adapter pinouts, terminal RJ-45-to-DB-25 B-7 RJ-45-to-DB-9 B-7 alarm port connectors B-3 input 1-6 output 1-7 alarm ratings A-5[...]

Index IN-2 Cisco IE 3010 Switch Hardwa re Installation Guide 78-19581-02 10/100 PoE ports 2-26 to AC and DC power 3-12 to console port B-7 connection procedures 2-25 to 2-26 connectors alarm port B-3 dual-purpose ports B-3 SFP module connectors B-2 console port connecting to B-7 described B-7 overview 1-7 RJ-45 console port 1-7 USB console port 1-7[...]

Index IN-3 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 lightnin g activi ty warning 2-2, 3-3 link status troubleshooti ng 4-2 M mounting rack 2-4 wall 2-15 O overcurrent protection warning 3-8 P pinouts 10/100 po rts B-2 console port B-8 crossover cables four twisted-pair, 1000BASE-T p orts B-6 two twisted-pair 10/ 100 ports B-6 RJ[...]

Index IN-4 Cisco IE 3010 Switch Hardwa re Installation Guide 78-19581-02 SD flash memory card 1-11 overview 1-11 replacing 2-23 serial number location 4-5 setup program C-7 SFP module patch cable description 1-6 installing 2-21 removing 2-22 SFP modules bale-clasp latch removal 2-21 connectors B-2 installing 2-20 removing 2-21 supported 1-4 SFP mod[...]

Index IN-5 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-02 two-poled disconnect devi ce 3-8 wall-mountin g 2-15[...]

Index IN-6 Cisco IE 3010 Switch Hardwa re Installation Guide 78-19581-02[...]