Cisco Systems MDS 9000 manual

CH A P T E R 20-1 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 20 Show Commands The commands in this chapter apply to the Cisco MDS 9000 F amily of multil ayer directors and f abric switches. All commands are sho wn here in al phabe tical order regardless of command mode. See the “Command Modes” section to [...]

20-2 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands • show fcroute, page 20 -44 • show fcs, page 20-47 • sho w fcsp, page 20-51 • sho w fctimer , page 20-53 • sho w fdmi, page 20-54 • sho w fdmi, page 20-54 • sho w ficon , page 20-57 • show f ile, page 20-63 • sho w flogi[...]

20-3 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands • sho w port-security , page 20-126 • show processes, page 20-129 • sho w qos, page 20-132 • sho w radius-server , page 20-134 • show rlir , page 20-135 • sho w role, page 20-139 • sho w rscn, page 20-140 • sho w running-[...]

20-4 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show aaa authentication show aaa authentication T o display configur ed authenticatio n information, use th e show aa a authentication command . show aaa authentication Syntax Descripti on This command has no ar guments or k eywo rds. Def[...]

20-5 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show aaa groups show aaa groups T o display configur ed server g roups, use the sho w aaa gr oups command. show aaa gr oups Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. Command Modes EXEC mode. Command[...]

20-6 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show arp show arp T o display Address Resolution Protocol (ARP) entries, use the show arp command. show arp Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. Command Modes EXEC mode. Command History This com[...]

20-7 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show banner motd show banner motd T o display a configured message of t he day (MO TD) banner , use the show banner moted command. show banner motd Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. Command [...]

20-8 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show boot show boot T o display the boot v ariables or modules, use the sho w boot command. show boot [ module [ slot | va riable-name ] | sup-1 | sup-2 | variab les ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command Hi[...]

20-9 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show boot auto-cop y show boot auto-copy T o dis play state of the auto-copy feature, use the show boot auto-copy command. show boot auto-copy [ list ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History This comm[...]

20-10 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show callhome show callhome T o display related Call Home information conf igured o n a switch, use the show callhome command. show ca llhome [ destination-pr of ile { pr ofil e | full-txt-destinat ion | short-txt-destination | XML-desti[...]

20-11 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show callhome email addresses configured: person1@epage.company.com full-txt destination profile information maximum message size:250000 email addresses configured: person2@company2.com The follo wing e xample displays the fu ll-tex t p[...]

20-12 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show cdp show cdp T o display CDP parameters conf igured globall y or for a specif ic interf ace, use the sho w cdp command. show cdp { all | ent ry [ all | name cdp-name ] | global | interface [ gigbitet hern et slot / po rt | mgmt 0 ] [...]

20-13 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show cdp CDP enabled on interface Sending CDP packets every 100 seconds Holdtime is 200 seconds The follo wing e xample displays all CDP neighbor entries. switch# show cdp entry all ---------------------------------------- Device ID:069[...]

20-14 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show cdp The follo wing e xample displ a ys CDP Neighbors (brief). switch# show cdp neighbors Capability Codes: R - Router, T - Trans-Bridge, B - Source-Route-Bridge S - Switch, H - Host, I - IGMP, r - Repeater Device ID Local Intrfce Hl[...]

20-15 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show cdp The follo wing example displays CDP traf f ic statistics for the management interface. switch# show cdp traffic interface mgmt 0 ---------------------------------------- Traffic statistics for mgmt0 Input Statistics: Total Pack[...]

20-16 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show cimserver show cimserver T o display the Common Information Models (CIM) conf igurations and settings, use t he show cimserv er command. show cimserver [ certif icateName | Ht tpsStatus | HttpStatus | status ] Syntax Descripti on De[...]

20-17 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show clock show clock T o display the system date and time and verify t he time zone conf iguration, use the sho w clock command. show clock Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. Command Modes [...]

20-18 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show core s show cores T o dis play all the cores presently av aila ble for upload from activ e sup, use the show cor es command. show cores Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. Command Modes E[...]

20-19 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show debug logfile show debug logfile T o display the debug messages that are sa ved in the deb ug log f ile, use the show debu g logf ile co mmand. show deb ug logf ile f ilename Syntax Descripti on Defaults None. Command Modes EXEC mo[...]

20-20 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show environ ment show environment T o display all en vironment -related switch information (st atus of cha ssis clock, chassis fan modules, po wer supply modules, p o wer supply redundanc y mo de and po wer usage summary , module temper[...]

20-21 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show environment Temperature: --------------------------------------------------------------- Module Sensor MajorThresh MinorThres CurTemp Status (Celsius) (Celsius) (Celsius) ------------------------------------------------------------[...]

20-22 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fabric-binding show fabric-binding T o display configur ed fab ric binding informatio n, use the show fabric-binding command in EXEC mode. show fabric-binding { database [ active ] [ vsan vsan-id ] | efmd statistics [ vsan vsan-id ][...]

20-23 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fabric-binding The follo wing e xample display s acti ve fabric bindi ng information. switch# show fabric-binding database active -------------------------------------------------- Vsan Logging-in Switch WWN Domain-id -------------[...]

20-24 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fabric-binding Statistics For VSAN: 346 ------------------------ Number of sWWN permit: 0 Number of sWWN deny : 0 Total Logins permitted : 0 Total Logins denied : 0 Statistics For VSAN: 347 ------------------------ Number of sWWN pe[...]

20-25 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fabric-binding Merge Accepts -> Transmitted : 0 , Received : 0 Merge Rejects -> Transmitted : 0 , Received : 0 Merge Busy -> Transmitted : 0 , Received : 0 Merge Errors -> Transmitted : 0 , Received : 0 EFMD Protocol St[...]

20-26 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fc-tun nel show fc-tunnel T o display configur ed Fibre Channel tu nnel information, use the sho w fc-tunnel command. show fc-tunnel [ explicit- path [ name ] | tunnel-id-map ] Syntax Descripti on Defaults None. Command Modes EXEC m[...]

20-27 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fc2 show fc2 T o display FC2 information, use the show fc2 command. show fc2 {bind | classf | exchange | exchr esp | flogi | nport | plogi | plogi_pwwn | port [ brief ] | socket | sockexch | socknotify | socknport | vsan} Syntax De[...]

20-28 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fc2 Examples The following e xample displays FC2 activ e socket information. switch# show fc2 socket SOCKET REFCNT PROTOCOL PID RCVBUF RMEM_USED QLEN NOTSK b2a64b20 2 0 1421 65535 0 0 0 b2a647e0 3 0 1418 262142 0 0 0 b2a644a0 3 0 14[...]

20-29 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fc2 The following example displays FC2 phys ical port informati on. switch# show fc2 port IX ST MODE EMUL TXPKTS TXDROP TXERR RXPKTS RXDROP R_A_TOV E_D_TOV F-SO RC RS CS EE 2-SO RS 3-SO RS 0 D 1 0 0 0 0 0 0 10000 2000 8000 0000 211[...]

20-30 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcalias show fcalias T o display the FC alias (fcalias0 conf iguration, u se the show fcalias command. show fcalias [ name string ] [ vsan vsan-id ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History This co[...]

20-31 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcanalyzer show fcanalyzer T o display the list of hosts conf ig ured for a remote capture, use the show fcanalyzer command. show fcanalyzer Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. Command M[...]

20-32 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcc show fcc T o view FCC settings, use t he show fcc commands. show fcc [ statisti cs interf ace { fc slot / port | fcip fcip-id | iscsi slot / port }] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History Thi[...]

20-33 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcdomain show fcdomain T o display the Fibre Channel domain (f cdomain) informati on, use the show fcdomain command. show fcdomain [ addr ess-allocation [ cache ] | allowed | domain-list | fcid persistent [ unused ] | statistics [ [...]

20-34 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcdomain Local switch configuration information: State: Enabled Auto-reconfiguration: Disabled Contiguous-allocation: Disabled Configured fabric name: 41:6e:64:69:61:6d:6f:21 Configured priority: 128 Configured domain ID: 0x64(100) [...]

20-35 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcdroplatency show fcdroplatency T o display the conf igured Fibre Channel l atency p arameters, use the sho w fcdroplatency command. show fcdr oplatency [ network | switch ] Syntax Descripti on Defaults None. Command Modes EXEC mo[...]

20-36 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcflow stats show fcflow stats T o display the conf igured Fibre Channe l flo w (fcflo w) information, use the show f cflow sta ts command. show fcflow stats [ aggr egated | usage ] module slot [ index flow-ind ex ] Syntax Descripti[...]

20-37 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcfwd show fcfwd T o display the conf igured fcfwd tables and statistics, use the show fcfwd command. show fcfwd {idxmap [ interf ace-toport | port-to-interface | statistics ] | pcmap [ interface ] | sf ib [ multicast | statistics [...]

20-38 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcip profile show fcip profile T o display the status of an inte rface at an y time, usedisplays the show fcip pr of ile command. show fcip profile [ pr ofil e-id | all ] Syntax Descripti on Defaults None. Command Modes EXEC Command[...]

20-39 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcns database show fcns database T o display the results of the disco v ery , or to displa y the name server d atabase for a specif ied VSAN or for all VSANs, use the sho w fcns database command. show fcns database {detail [ vsan v[...]

20-40 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcns da tabase FCID TYPE PWWN (VENDOR) FC4-TYPE:FEATURE -------------------------------------------------------------------------- 0xef0001 N 22:02:00:05:30:00:35:e1 (Cisco) scsi-fcp:init isc..w Total number of entries = 1 VSAN 3: -[...]

20-41 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcns database fabric-port-wwn :22:01:00:05:30:00:35:de hard-addr :0x000000 Total number of entries = 1 ... The follo wing e xample displays the management VSAN (VSAN 2). switch# show fcns database vsan 2 VSAN 2: -------------------[...]

20-42 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcns da tabase Related Commands Com ma nd De scr ip tio n asm mgmt-vsan Displays the CPP interface confi guration for a specif ied interface.[...]

20-43 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcns stat istics show fcns statistics T o display the statistical information for a specified VSAN or for all VSANs, use the show fcns statistics command. show fcns statistics [ detail ] [ vsan vsan-id ] Syntax Descripti on Default[...]

20-44 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcro ute show fcroute Use the show fcr oute command to vie w specif ic information about e xisting Fibre Channel and FSPF configurations. show fcroute { distance | label [ label ] vsan vsan-id | multicast [ fc-id vsan vsan-id | vsan[...]

20-45 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcroute The follo wing e xample display s multicast routing i nformation. switch# show fcroute multicast VSAN FC ID # Interfaces ---- -------- ------------ 1 0xffffff 0 2 0xffffff 1 3 0xffffff 1 4 0xffffff 0 5 0xffffff 0 6 0xffffff[...]

20-46 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcro ute The follo wing e xample display s unicast r outing information for a specif i ed FCID. switch# show fcroute unicast 0x040101 0xffffff vsan 4 D:direct R:remote P:permanent V:volatile A:active N:non-active # Next Protocol VSA[...]

20-47 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcs show fcs Use the show fcs co mmands to display the status of the f abric conf iguration. show fcs {database [vsan vsan-id ] | ie [ nwwn wwn ] vsan vsan-id | pl atf orm [ name string ] vsan vsan-id | port [ pwwn wwn ] vsan vsan-[...]

20-48 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcs fc2/2 20:42:00:05:30:00:16:de Unknown None fc2/17 20:51:00:05:30:00:16:de TE 20:0a:00:05:30:00:20:de FCS Local Database in VSAN: 5 ------------------------------ Switch WWN : 20:05:00:05:30:00:12:5f Switch Domain Id : 0xef(239) [...]

20-49 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcs This command displays platf orm information within a specif ied VSAN. switch# show fcs platform vsan 1 Platform List for VSAN: 1 Platform-Names -------------- SamplePlatform [Total 1 Platforms in Fabric] This command displays F[...]

20-50 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcs This command display s FCS statistics. switch# show fcs statistics FCS Statistics for VSAN: 1 --------------------------- FCS Rx Get Reqs :2 FCS Tx Get Reqs :7 FCS Rx Reg Reqs :0 FCS Tx Reg Reqs :0 FCS Rx Dereg Reqs :0 FCS Tx De[...]

20-51 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcsp show fcsp T o display the status of the Fibre Channel Security Protocol (FC-SP) conf iguration, use the show fcsp commands. show fcsp [ asciiwwn ascii-wwn | dhchap [ database ] | interface fc slot / port [ statistics | wwn ] |[...]

20-52 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcsp The follo wing example displays the FC-SP WWN of th e device connected throu gh a specified interface. switch# show fcsp interface fc 2/1 wwn fc2/1: fcsp authentication mode:SEC_MODE_ON Status: Successfully authenticated Other [...]

20-53 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fctim er show fctimer T o display the Fibre Channel timer s, use the show fctimer command . show fctimer [ d_s_tov | e_d_tov | f_s_tov | r_ a_tov | vsan vsan-id ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command [...]

20-54 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fdmi show fdmi T o display the Fabric-De vice Mana gement Inte rface (FDMI) database information, use the show fdmi command. show fdmi database [ detail [ hba-i d [ hba-id vsan vs an-id | vsan vsan-id ] | vsan vsan -id ] Syntax Desc[...]

20-55 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fdmi HBA-ID: 21:01:00:e0:8b:2a:f6:54 ------------------------------- Node Name :20:01:00:e0:8b:2a:f6:54 Manufacturer :QLogic Corporation Serial Num :74262 Model :QLA2342 Model Description:QLogic QLA2342 PCI Fibre Channel Adapter H[...]

20-56 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fdmi CT Payload Len :2040 Port-id: 21:01:00:e0:8b:2a:f6:54[...]

20-57 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ficon show ficon T o display configur ed FICON informatio n, use the show fi con command. show f icon [ control-de vice sb3 [ vsan vsan-id ] | fi rst-a vailable port-number | vsan vsan-id [ allegiance | dir ectory-history [ key-cou[...]

20-58 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ficon Examples The followi ng exampl e displays conf igured FICON information switch# show ficon Ficon information for VSAN 20 Ficon is online VSAN is active Host port control is Enabled Host offline control is Enabled User alert mo[...]

20-59 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ficon The follo wing e xample displays port address counter informatio n. switch# show ficon vsan 20 portaddress 8 counters Port Address 8(0x8) is up in vsan 20 Port number is 8(0x8), Interface is fc1/8 Version presented 1, Counter[...]

20-60 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ficon switch# show ficon vsan 2 Ficon information for VSAN 2 Ficon is enabled VSAN is active Host control is Enabled Host offline control is Enabled Clock alert mode is Disabled User alert mode is Disabled SNMP control is Disabled A[...]

20-61 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ficon The follo wing e xample displays two port a ddresses conf igured with dif ferent states switch# show ficon vsan 2 portaddress 2 Port Address 2(0x2) is not installed in vsan 2 Port number is 2(0x2), Interface is fc1/2 Port nam[...]

20-62 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ficon 74570 57 74571 58 74572 59 74573 60 74574 61 74575 62 74576 63 74577 64 74578 74579 74580 1-3,5,10,12,14-16,34-40,43-45,47-54,56-57,59-64 74581 3,5 74582 64 74583 74584 1-3,10,12,14-16,34-40,43-45,47-54,56-57,59-64 74585 1 745[...]

20-63 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show file show file T o dis play the contents of a specif ied file in the f ile system, use the show file command. show file fil e n a me [ cksum | md5sum ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History Thi[...]

20-64 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show flogi databa se show flogi database T o list all the FLOGI sessions through all interf aces across all VSANs, use the sho w flogi database command. show flogi database [ fcid fcid-id | interface interface | vsan vsan-id ] Syntax Des[...]

20-65 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show flogi database The follwing example displays the FLOGI interface. switch# show flogi database interface fc 1/11 INTERFACE VSAN FCID PORT NAME NODE NAME -------------------- ---- -------- ----------------------- --------------------[...]

20-66 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fspf show fspf T o display global FSPF information, use the show fspf command . This information in cludes: • the domain number of the switch • the autonomous re gion for the switch • Min_LS_arri v al: the minimu m time that m[...]

20-67 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fspf Neighbor Domain Id is 0x03(3), Neighbor Interface index is 0x0001060d Statistics counters : Number of packets received :LSU 184 LSA 184 Hello 5477 Error packets 0 Number of packets transmitted :LSU 184 LSA 184 Hello 5478 Retra[...]

20-68 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fspf ----------------------------------------------------------------------------- 0x65(101) 0x00001095 0x00001085 1 500 0x65(101) 0x00001096 0x00001086 1 500 0x65(101) 0x00001097 0x00001087 1 500 0x65(101) 0x00001094 0x00001084 1 5[...]

20-69 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show hardware show hardware T o display switch hardware in ventory details, use the sho w hard war e command. show hardwar e [ ipc-channel status ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History This command[...]

20-70 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show hard ware This supervisor carries Pentium processor with 963108 kB of memory Intel(R) Pentium(R) III CPU at 800MHz with 512 KB L2 Cache Rev:Family 6, Model 11 stepping 1 512K bytes of non-volatile memory. 503808 blocks of internal b[...]

20-71 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show hosts show hosts T o d i s pl a y configured DNS host configuration details, us e th e show hosts command. show hosts Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. Command Modes EXEC mode. Command[...]

20-72 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show incompatibility system show incompatibility system T o display the HA compatibility status b etween the tw o supervisor modules, use the show incompat ibility sys tem command. show incompatibil ity system [bootflash: | slot0: | vola[...]

20-73 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show install all impact show install all impact T o display the software compatibility matr ix of a specif ic image, use the show install all impact command. show install all impact [ asm-sfn im age-fil ena me ] [ kickstart image-f ilen[...]

20-74 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show install all impact [####################] 100% -- SUCCESS Extracting “loader” version from image bootflash:/vk73a. [####################] 100% -- SUCCESS Extracting “slc” version from image bootflash:/vs73a. [###############[...]

20-75 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show install all stat us show install all status T o display the on-going install al l command status or the log of the last installed install a ll command from a Console, SSH, or T elnet session, use the show insta ll all status comman[...]

20-76 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show install all status Verifying image bootflash:/b-1.3.0.104 -- SUCCESS Verifying image bootflash:/i-1.3.0.104 -- SUCCESS Extracting “system” version from image bootflash:/i-1.3.0.104. -- SUCCESS Extracting “kickstart” version [...]

20-77 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show in-order-guarantee show in-order-guarantee T o display the present conf igured st ate of the in-order deli v ery feature, use the show in-order-guarantee command . show in-order -guarantee Syntax Descripti on This command has no ar[...]

20-78 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show interface show interface Y ou can check the status of an interface at any time b y using the show interface command. show interface [ interface range ] [ bbcre dit ] | [ brief | counters | description ] [ cpp slot / pr ocess-number [...]

20-79 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show interface Command Modes EXEC Command History This command was mod ified i n Cisco MDS SAN-OS Release 1.3(1). Usage Guidelines Y ou can specify a range o f interfaces b y issuing a command with t he follo wing e xample format: inter[...]

20-80 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show interface The follo wing e xample display s in formation for a VSAN interface. switch# show int vsan 2 vsan2 is up, line protocol is up WWPN is 10:00:00:05:30:00:59:1f, FCID is 0xb90100 Internet address is 10.1.1.1/24 MTU 1500 bytes[...]

20-81 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show interface Interface Status IP Address Speed MTU ------------------------------------------------------------------------------- vsan1 up 10.1.1.1/24 1 Gbps 1500 The follo wing e xample displ ays counter information for a FC IP inte[...]

20-82 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show interface ------------------------------------------------------------------------------- Interface Input (rate is 5 min avg) Output (rate is 5 min avg) ----------------------------- ----------------------------- Rate Total Rate Tot[...]

20-83 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show interface 0 Class 2/3 frames output, 0 bytes 0 Error frames 0 reass frames 16 receive B2B credit remaining 3 transmit B2B credit remaining. The follo wing e xample displays information for a Gig abit Ethernet int erface. switch# sh[...]

20-84 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show interface Temperature : 34.98 Celsius Voltage : 3.31 Volt Current : 7.24 mA Optical Tx Power : -5.99 dBm Optical Rx Power : -23.01 dBm Note: ++ high-alarm; + high-warning; -- low-alarm; - low-warning switch# show interface fc2/5 tra[...]

20-85 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ip access-list show ip access-list T o display the IP access control list s (IP-ACLs) currently acti ve, use the show ip access-list command. show ip access-list [ list-number | usage ] Syntax Descripti on Defaults None. Command Mo[...]

20-86 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ip route show ip route T o display the ip routes currently act i ve, use the sho w ip r oute command. show ip r oute [ conf igured ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History This command was in tro[...]

20-87 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ip routing show ip routing T o display the IP routing state, us e the show ip routing command. show ip routing Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. Command Modes EXEC mode. Command Histor[...]

20-88 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ips a rp show ips arp T o display the IP storage AR P cache informaiton , use the show ips arp co mmand. show ips arp interface gigabitether net slot / port Syntax Descripti on Defaults None. Command Modes EXEC Command History This [...]

20-89 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ips ip route show ips ip route T o show the I P storage r oute table information, us e the show ips ip r oute command. show ips ip r oute in terface gigabite thernet slot / port Syntax Descripti on Defaults None. Command Modes EXEC[...]

20-90 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ips stats show ips stats T o display IP storage statistics, use the show ips stats co mmand. show ips stats { bu ffer | dma-bridge | icmp | ip | mac } interface gigabitether net slot / port show ips stats { hw-comp | tcp } { all | i[...]

20-91 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ips stats Examples The followi ng exampl e displays iSCSI b uf fer stat istics. switch# show ips stats buffer interface gigabitethernet 1/2 Buffer Statistics for port GigabitEthernet1/2 Mbuf stats 164248 total mbufs, 82119 free mbu[...]

20-92 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ips stats The follo wing example displays TCP statistics. switch# show ips stats tcp interface gigabitethernet 8/1 TCP Statistics for port GigabitEthernet8/1 Connection Stats 0 active openings, 0 accepts 0 failed attempts, 0 reset r[...]

20-93 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ips sta tus show ips status T o dis play the IP storage status, use the show ips status command. show ips status [ module slot ] Syntax Descripti on Defaults None. Command Modes EXEC Command History This command was in troduced in [...]

20-94 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show iscsi global show iscsi global T o display global iSCSI conf igured information, u se the show iscsi global command. show iscsi global Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. Command Modes EX[...]

20-95 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show iscsi initiator show iscsi initiator T o display information about all the iS CSI nodes that are remote to the switch, u se the show iscsi initiator command. show iscsi initiator [ conf igur ed [ initiator -name ] | detail | fcp-se[...]

20-96 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show iscsi initiator iSCSI Node name is iqn.1987-05.com.cisco.01.b6ca466f8b4d8e848ab17e92f24bf9cc iSCSI alias name: iscsi6-lnx Node WWN is 23:29:00:05:30:00:7e:a0 (dynamic) Member of vsans: 1, 2, 3, 4 Number of Virtual n_ports: 1 Virtual[...]

20-97 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show iscsi session show iscsi session T o display iSCSI session information, use the show iscsi session command. show iscsi session [ incom ing ] [ initiator name ] [ outgoi ng ] [ target name ] [ detail ] Syntax Descripti on Defaults N[...]

20-98 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show iscsi session The follo wing co mmand displays the specif ied iSCSI tar get. switch# show iscsi session target iqn.com.domainname.172.22.93.143.08-03.gw.220000203738e77d Initiator iqn.1987-05.com.cisco.01.15cee6e7925087abc82ed963776[...]

20-99 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show iscsi stats show iscsi stats T o display the iSCSI statis tics information, use the show iscsi stats command. show iscsi stats [ iscs i slot / port ] [ clear | detail ] Syntax Descripti on Defaults None. Command Modes EXEC Command [...]

20-100 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show iscsi stats 0 Response pdus (with sense 0), 0 R2T pdus 0 Data-in pdus, 0 Data-in bytes iscsi8/4 5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec 5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec iSCSI statistics[...]

20-101 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show iscsi stats 0 Data-in pdus, 0 Data-in bytes iSCSI Forward: Command: 0 PDUs (Received: 0) Data-Out (Write): 0 PDUs (Received 0), 0 fragments, 0 bytes FCP Forward: Xfer_rdy: 0 (Received: 0) Data-In: 0 (Received: 0), 0 bytes Response[...]

20-102 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show iscsi stats The follo wing comman d displays detailed st atistics for the sp ecif ied iSCSI interface. switch# show iscsi stats iscsi 8/1 iscsi8/1 5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec 5 minutes output rate 0 b[...]

20-103 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show iscsi virtual-target show iscsi virtual-target T o display all t he iSCSI no des that are local to the switch, use the show iscsi virtual- target command. show iscsi virtual-tar get [ conf igur ed ] [ name ] Syntax Descripti on De[...]

20-104 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show isns show isns T o display iSNS informaiton, use the show isns command. show isns { pr of ile [ pr ofile-name [ counters ] | counters ] | query pr ofile-name { gigabitethernet slot / port | port-channel port }} Syntax Descripti on [...]

20-105 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show isns The follo wing e xample displays iSNS PDU statistics fo r a specifi ed iSNS prof ile. switch# show isns profile ABC counters iSNS profile name ABC tagged interface GigabitEthernet2/3 iSNS statistics Input 54 pdus (registratio[...]

20-106 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ivr show ivr T o display var ious inter -VSAN routin g (IVR) conf iguratio ns, use the show ivr command. show iv r [ status | virtual-domains [ vsan vs an-id ] | virtual-f cdomain-add-status | vsan-topology [ active | configur ed ][...]

20-107 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ivr Examples The followi ng command displ ays the status of the IVR virtual domain conf iguration. switch# show ivr virtual-fcdomain-add-status IVR virtual domains are added to fcdomain list in VSANS: 1 (As well as to VSANs in int[...]

20-108 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ivr The follo wing e xample display s the IVZ conf iguration switch# show ivr zone zone name Ivz_vsan2-3 pwwn 21:00:00:e0:8b:02:ca:4a vsan 3 pwwn 21:00:00:20:37:c8:5c:6b vsan 2 zone name ivr_qa_z_all pwwn 21:00:00:e0:8b:06:d9:1d vs[...]

20-109 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ivr switch# show ivr vsan-topology configured AFID SWITCH WWN Active Cfg. VSANS -------------------------------------------------------------- 1 20:00:00:05:30:00:3c:5e yes yes 3,2000 1 20:00:00:05:30:00:58:de yes yes 2,2000 1 20:[...]

20-110 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show kern el core show kernel core T o display kernel co re conf iguration infor mation, use the show kern el co re command. show kernel cor e { limit | module slot | target } Syntax Descripti on Defaults None. Command Modes EXEC Comman[...]

20-111 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show license show license T o display license information, use the sho w lice nse command. show license [ brief | fil e fil en a me | host-id license-name | usage ] Syntax Descripti on Defaults None. Command Modes EXEC Command History [...]

20-112 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show license The follo wing e xample displays the ho st IDs, required to request node lock ed license. switch# show license host-id License hostid:VDH=4C0AF664[...]

20-113 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show line show line T o configure a virtual t erminal line , use the show line command. show line [ com1 [ user -input-string ] | co nsole [ connected | user -input-string ]] Syntax Descripti on Defaults None. Command Modes EXEC. Comma[...]

20-114 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show line line aux Conf igures the auxili ary COM 1 po rt clear line Deleted configured li ne sessions. Command Description[...]

20-115 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show logging show logging T o display the current system message logging conf iguration, use the show logging comman d. show logging [ console | level [ auth | authpriv | callho me | cron | daemon | ftp | kernel | local n | lpr | mail [...]

20-116 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show logging syslog_get_levels :: Error(-1) querying severity values for fcmpls at SAP 30 syslog_get_levels :: Error(-1) querying severity values for fcfwd at SAP 38 Facility Default Severity Current Session Severity -------- ----------[...]

20-117 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show logging The follo wing e xample displ ays console log ging status. switch# show logging console Logging console: enabled (Severity: notifications) The follo wing e xample display s logging facili ty status. switch# show logging fa[...]

20-118 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show logging 0(emergencies) 1(alerts) 2(critical) 3(errors) 4(warnings) 5(notifications) 6(information) 7(debugging) The follo wing e xample display s logging informatio n. switch# show logging info Logging console: enabled (Severity: n[...]

20-119 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show logging fcfwd 0 0 ntp 2 2 platform 5 5 vrrp_eng 2 2 callhome 2 2 mcast 2 2 rscn 2 2 securityd 2 2 vhbad 2 2 rib 2 2 vshd 5 5 0(emergencies) 1(alerts) 2(critical) 3(errors) 4(warnings) 5(notifications) 6(information) 7(debugging) T[...]

20-120 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show module show module T o verify the status of a module, use the show module command. show module [ slot | diag | uptime ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History This command was mod ified i n Cisc[...]

20-121 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show module Use the uptime option to display the time t hat a specifi ed supervisor module, swi tching module, or services module is functional in the switch. This t ime is comp uted from the time a modu le goes online after a disrupti[...]

20-122 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ntp show ntp T o display the configured Network T ime Protocol (NTP) server and peer associations, use the show ntp command. show ntp { peers | statistics [ io | local | memory | peer { ipaddr ip-addr ess | name peer -name }] | tim[...]

20-123 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ntp Examples The followi ng exampl es display the NTP informatio n. switch# show ntp peers -------------------------------------------- Peer IP Address Serv/Peer -------------------------------------------- 10.20.10.2 Server 10.20[...]

20-124 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show port-ch annel show port-channel Use the show port-channel command to v ie w information about e xisting Port Channel conf igurations show port-channel {compatibility-paramet ers | consistency [ detail ] | database [ interface port-[...]

20-125 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show port-channel The follo wing e xample displays the Po rtChannel database. switch# show port-channel database port-channel 2 Administrative channel mode is on Operational channel mode is on Last membership update succeeded First ope[...]

20-126 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show port-secu rity show port-security T o display configu red port securi ty feature information, use the show port-security database comman d. show port-security { database [ active [ vsan vsan-id ]] | fwwn fwwn-id vsan vsan-id | i nt[...]

20-127 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show port-security ---------------------------------------------------------------------------------------- 1 21:00:00:e0:8b:06:d9:1d(pwwn) 20:0d:00:05:30:00:95:de(fc1/13) 1 50:06:04:82:bc:01:c3:84(pwwn) 20:0c:00:05:30:00:95:de(fc1/12)[...]

20-128 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show port-secu rity Number of sWWN deny : 0 ... The follo wing e xample displays the statu s of the acti ve database and the auto-learn conf iguration. switch# show port-security status VSAN 1 :Activated database, auto-learning is enabl[...]

20-129 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show proces ses show processes T o display general information about all the processes, use the sho w processes command. show processes [ cpu | log [ details | pid pr ocess-id ] | memory ] Syntax Descripti on Defaults None. Command Mod[...]

20-130 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show processes PC: Current program counter in hex format Start_cnt: how many times a process has been started. TTY: Terminal that controls the process. A “-” usually means a daemon not running on any particular tty. Process: name of[...]

20-131 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show proces ses The follo wing e xample displays the detail log informat ion about a particular process. switch# show processes log pid 1339 Service: fspf Description: FSPF Routing Protocol Application Started at Sat Jan 5 03:23:44 198[...]

20-132 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show qos show qos T o display the current QoS settings along w ith a the number of frames mark ed high prio rity , use the show qos command. show qos { class-map [name class-name ] | dw rr | policy-map [name policy-name ] | serv ice pol[...]

20-133 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show qos The follo wing example displays the co ntents of a specified class map. switch# show qos class-map name MyClass qos class-map MyClass match-any match dest-wwn 20:01:00:05:30:00:28:df match src-wwn 23:15:00:05:30:00:2a:1f match[...]

20-134 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show radius-s erver show radius-server T o display all conf igured RADIUS serv er parameters, use the sho w radius-server command. show radius-serv er [ groups | so rted ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Comm[...]

20-135 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show rlir show rlir T o display the information about Re gistered Link Incident Rep ort (RLIR), Link Incident Record Registration (LIRR), an d Distrib ute Re gistered Link Incident Record (D RLIR) frames, use the show rlir command. sho[...]

20-136 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show rlir Statistics for VSAN: 4 ------------------------- Number of LIRR received = 0 Number of LIRR ACC sent = 0 Number of LIRR RJT sent = 0 Number of RLIR sent = 0 Number of RLIR ACC received = 0 Number of RLIR RJT received = 0 Numbe[...]

20-137 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show rlir Total number of entries = 1 Established Registration List for VSAN: 100 ---------------------------------------------- FC-ID LIRR FORMAT REGISTERED FOR ---------------------------------------------- 0x0b0500 0x18 conditional [...]

20-138 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show rlir The follo wing e xample display s recent RLIRs for a specif ied interf ace. switch# show rlir recent interface fc1/1 Recent link incident records ---------------------------------------------------------------------------- *Ho[...]

20-139 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show role show role T o display roles (and their associat ed rules) conf igured on t he switch, including t hose roles that ha ve no t yet been committed to persistent sto rage, use the show r ole command. show role [ name string ] Syn[...]

20-140 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show rsc n show rscn T o d is p l ay registered state change notif ication (R S C N) i n fo r m at i o n, u s e t h e show rscn command. show rscn { scr -table [ vsan vsan-id ] | statistics [ vsan vsan-id ]} Syntax Descripti on Defaults[...]

20-141 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show rscn switch# show rscn statistics vsan 1 Statistics for VSAN: 1 ------------------------- Number of SCR received = 0 Number of SCR ACC sent = 0 Number of SCR RJT sent = 0 Number of RSCN received = 0 Number of RSCN sent = 0 Number [...]

20-142 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show running- config show running-config T o display the running confi guration f ile, use the show running-conf ig command show running-conf i g [ diff | interface [cpp | fc | fc slot / port | fc-tunnel tunn el-id | fcip fcip-number | [...]

20-143 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show running-config Examples The following e xample displays the configur ation current ly running on the swi tch. switch# show running-config Building Configuration ... interface fc1/1 interface fc1/2 interface fc1/3 interface fc1/4 i[...]

20-144 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show running- config switch# show running-config interface mgmt0 interface mgmt0 ip address 255.255.255.0 255.255.255.0 The follo wing e xample displays running conf igurati on information for a speci fi ed feature—in this case, VSANS[...]

20-145 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show scsi-target show scsi-target T o display information about e xisting SCSI t ar get config urations, use the sho w scsi-target command. show scsi-target { auto-poll | custom-list | devices [ vsan vsan-id ] [ fcid fcid-id ] | disk [[...]

20-146 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show scsi-target The follo wing e xample displ ays a customized disc ov ered targets: switch# show scsi-target custom-list --------------- VSAN DOMAIN --------------- 1 56 The follo wing e xample displays discov ered disk informati on. [...]

20-147 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show scsi-target The follo wing example displays the port WWN that is assigned to each OS (W in dows, AIX, Solaris, Linux, or HPUX). switch# show scsi-target pwwn ------------------------------ OS PWWN ------------------------------ WI[...]

20-148 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show snmp show snmp T o display the count information for al l SNMP settings, use the sho w snmp command. show snmp [ community | host | user ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History This command was[...]

20-149 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show snmp The follo wing e xample displays SNMP user detail s. switch# show snmp user User Group Auth Priv ____ _____ ____ ____ steve network-admin md5 des sadmin network-admin md5 des stever network-operator md5 des The follo wing e x[...]

20-150 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show span session show span session T o display specific information about a S w it c h e d P o r t A n al y z e r ( SP AN) session, use the show span session command. show span session [ session-id [ brief ] | brief ] Syntax Descripti [...]

20-151 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show span session The follo wing example displays all SP AN sessions. switch# show span session Session 1 (inactive as no destination) Destination is not specified Session filter vsans are 1 No ingress (rx) sources No egress (tx) sourc[...]

20-152 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show spr om show sprom T o display vendor I D, product component attrib utes, se rial number information th at can be used to track field replacable units, use the show spr om command. show spro m { backplane backplane-index | clock clo[...]

20-153 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show sprom Examples The followi ng exampl e displays managemen t module information. Thi s module and command are specific to the Cisco MDS 9216 switch. switch# show sprom mgmt-module DISPLAY SAM sprom contents: Common block: Block Sig[...]

20-154 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show spr om Serial Number : abcdefgh Part Number : 73-7523-06 Part Revision : 0.0 Mfg Deviation : 0.0 H/W Version : 0.0 Mfg Bits : 0 Engineer Use : 0 snmpOID : 9.5.1.3.1.1.2.2000 Power Consump : -524 RMA Code : 0-0-0-0 Supervisor Module[...]

20-155 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ssh show ssh T o dis play Secure Shell in formation (SSH), use the show ssh command. show ssh { key [ dsa | rsa | rsa1 ] | server } Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History This command was in tr[...]

20-156 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ssh The follo wing e xample display s Host K ey P air detail s. switch# show ssh key rsa1 Keys generated:Sun Jan 13 07:16:26 1980 1024 35 fingerprint: 1024 67:76:02:bd:3e:8d:f5:ad:59:5a:1e:c4:5e:44:03:07 could not retrieve rsa key [...]

20-157 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show startup-config show startup-config T o display the startup conf iguration f ile, use the show startup-conf ig command show startup-conf ig [ log ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History This co[...]

20-158 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show startup-config interface port-channel 5 switchport mode E no switchport trunk allowed vsan all switchport trunk allowed vsan add 1-10interface port-channel 5 switchport mode E no switchport trunk allowed vsan all switchport trunk a[...]

20-159 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show startup-config interface fc2/6 channel-group 2 force no shutdown interface fc2/7 switchport mode E no shutdown no switchport trunk allowed vsan all switchport trunk allowed vsan add 1-25 interface fc2/9 switchport mode E switchpor[...]

20-160 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show startup-config interface fc9/16 switchport mode FL no shutdown interface mgmt0 ip address 172.22.90.38 255.255.255.0 no shutdown[...]

20-161 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show switchname show switchname T o display the switch network name, u se the show s witchname co mmand. show switchname [ serialnum ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History This command was in trod[...]

20-162 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show system show system T o display the system information, use the show system command. show system { cores | defaul t switchport | dir ectory inf ormation | error -id { he x-id | list } | exception-inf o | pss shrink status [ details [...]

20-163 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show system Examples The followi ng exampl e displays the system r edundanc y status. switch# show system redundancy status Redundancy mode --------------- administrative: HA operational: None This supervisor (sup-2) ------------------[...]

20-164 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show system The follo wing e xample displays system-related CPU and memory statistics. switch# show system resources Load average: 1 minute: 0.43 5 minutes: 0.17 15 minutes: 0.11 Processes : 100 total, 2 running CPU states : 0.0% user, [...]

20-165 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show system health show system health T o display configur ed Online System Heal th Management (OSHM) informatio n, use the show system health command. show system health [module slot | statistics [ loopback [ interface { fc slot / por[...]

20-166 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show system health The follo wing e xample displays the current health of a sp ecif ied module. switch# show system health module 8 Current health information for module 8. Test Frequency Status Action ----------------------------------[...]

20-167 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show system health The follo wing e xample displays the stati stics for a specif ied module. switch# show system health statistics module 3 Test statistics for module # 3 ----------------------------------------------------------------[...]

20-168 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show tacacs-s erver show tacacs-server T o display configured T ACA CS+ servers and groups inf ormation, use the show tacacs-server command. show tacacs-serv er [ groups | s orted ] Syntax Descripti on Defaults None. Command Modes EXEC [...]

20-169 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show tech-support show tech-support T o display information useful to technical sup port when reportin g a problem, use the sho w tech-support command. show tech-support [ brief | details | interface { fc slot / port | gigabitether net[...]

20-170 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show tech-s upport • show processes log details Examples The followi ng exampl e displays techni cal support informatio n for a specif ic module. switch# show tech-support module 1 'terminal length 0' 'show module &apos[...]

20-171 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show tech-support The sho w tech-support brief command provi des a summary of the current r unning state of the sw itch. vegas01# show tech-support brief Switch Name : vegas01 Switch Type : DS-X9216-K9-SUP Kickstart Image : 1.3(2a) boo[...]

20-172 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show tech-s upport fc1/11 1 auto on fcotAbsent -- -- -- fc1/12 1 auto on fcotAbsent -- -- -- fc1/13 1 auto on fcotAbsent -- -- -- fc1/14 1 auto on fcotAbsent -- -- -- fc1/15 1 auto on fcotAbsent -- -- -- fc1/16 1 auto on fcotAbsent -- -[...]

20-173 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show telnet server show telnet server T o dis play the state of the T elnet access configuration, use the show telnet serv er command. show telnet server Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. [...]

20-174 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show terminal show terminal T o display the terminal information, use the sho w terminal command show terminal Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. Command Modes EXEC mode. Command History Thi[...]

20-175 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show tlport show tlport T o display configur ed TL port inf ormation, use the sho w tlport command show tlport { alpa-cache | discapp fcid fcid-id [ vsan vsan-id ] [ ver bo se ] | interface fc slot / port { all | private | pr oxied | t[...]

20-176 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show tlport Examples The followi ng exampl e displays the TL ports in all VSANs. switch# show tlport list ------------------------------- Interface Vsan FC-ID State ------------------------- ------ fc1/16 1 0x420000 Init fc2/26 1 0x1500[...]

20-177 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show trunk protocol show trunk protocol T o display trunk protocol status, use the sho w trunk protocol command. show trunk protocol Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. Command Modes EXEC mo[...]

20-178 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show user-acc ount show user-account T o display configur ed informati on about user accounts, use the show user -account command. show user -account [ user-name | iscsi ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Comm[...]

20-179 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show users show users T o dis play all users currently accessing the switch, use the show users command. show users Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. Command Modes EXEC mode. Command Histo[...]

20-180 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ver sion show version T o display the versi on of system softw are that is curren tly running on the switch, use th e sho w version command. show vers ion [ epld ur l | image { bootflash: | slot0: | volati le: } image -file na me |[...]

20-181 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show version switch# show version image bootflash:bad_image <-------------- f ailure case Md5 Verification Failed Image integrity check failed The follo wing e xample displ ays current EP LD versions for a specified module. switch# [...]

20-182 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ver sion Hardware RAM 1024584 kB bootflash: 1000944 blocks (block size 512b) slot0: 0 blocks (block size 512b) 172.22.92.181 uptime is 0 days 2 hours 18 minute(s) 1 second(s) Last reset at 970069 usecs after Tue Sep 16 22:31:25 198[...]

20-183 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show vrrp show vrrp T o display the VRRP confi gur ation informati on, use the show vrrp command. show vrrp [ statistics | vr gr oup [ interface type ]] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History This c[...]

20-184 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show vrrp The follo wing e xample displays VRRP stat istics. switch# show vrrp vr 7 interface vsan 2 statistics vr id 7 statistics Become master 0 Advertisement 0 Advertisement Interval Error 0 Authentication Failure 0 TTL Error 0 Prior[...]

20-185 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show vsan show vsan T o display information about con fi gured VSAN, use the show vsan command. show vsan [ vsan-id [ membership ] | membership interface { fc slot / port | fcip fcip-id | fv slot / dpp-number / fv-port | iscsi slot / p[...]

20-186 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show vsan Examples The followi ng exampl es displays conf igured VSAN information. switch# show vsan 1 vsan 1 information name:VSAN0001 state:active interoperability mode:yes ß verify mode loadbalancing:src-id/dst-id/oxid operational s[...]

20-187 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show vsan vsan 4094:isolated_vsan switch# show vsan membership interface fv 2/1/3 , fv2/1/5 - 7 fv2/1/3 vsan:2 allowed list:1-4093 fv2/1/5 vsan:3 allowed list:1-4093 fv2/1/6 vsan:4 allowed list:1-4093 fv2/1/7 vsan:4 allowed list:1-409[...]

20-188 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show wwn show wwn T o display the status of the WWN conf iguratio n, use the show ww n commands. show wwn { status block-id number | switch } Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History This command was i[...]

20-189 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show zone show zone T o dis play zone information, use the show zone command. show zone [ active [ vsan vsan-id ] | ess [ vsan vsan-id ] | member { fcalias alias-name | fcid fcid-id [ lun lun-id ] | pwwn wwn [ lun lun-id ]} [ active | [...]

20-190 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show zone zone name Zone1 vsan 1 pwwn 21:00:00:20:37:6f:db:dd pwwn 21:00:00:20:37:a6:be:2f pwwn 21:00:00:20:37:9c:48:e5 fcalias Alias1 zone name Techdocs vsan 3 ip-address 10.15.0.0 255.255.255.0 The follo wing e xample displ ays zone i[...]

20-191 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show zone The follo wing e xample displays all zones to which a member belong s using the FC ID. switch# show zone member pwwn 21:00:00:20:37:9c:48:e5 VSAN: 1 zone Zone3 zone Zone1 fcalias Alias1 The follo wing e xample displays the nu[...]

20-192 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show zone The follo wing e xample displays the status of conf igured zo nes. switch# s how zone status VSAN: 1 default-zone: permit distribute: active only Interop: 100 Full Zoning Database : Zonesets:0 Zones:0 Aliases: 0 Active Zoning [...]

20-193 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show zonese t show zoneset T o dis play the conf igured zone sets, use the show zoneset co mmand . show zoneset [ name zoneset-name ] [ brief ] [ active ] [ vsan vsan-id ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Com[...]

20-194 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show zone set The follo wing e xample displ ays conf igured zone set info rmation for a sp ecif ic VSAN. switch# show zoneset vsan 2-3 zoneset name ZoneSet2 vsan 1 zone name Zone2 vsan 1 fwwn 20:52:00:05:30:00:2a:1e fwwn 20:53:00:05:30:[...]