Español dropdown-ico

Citizen Systems CBM-710/720 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69

Ir a la página of

manuales de instrucciones parecidos

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Citizen Systems CBM-710/720. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Citizen Systems CBM-710/720 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Citizen Systems CBM-710/720 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Citizen Systems CBM-710/720, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Citizen Systems CBM-710/720 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Citizen Systems CBM-710/720
- nombre de fabricante y año de fabricación del dispositivo Citizen Systems CBM-710/720
- condiciones de uso, configuración y mantenimiento del dispositivo Citizen Systems CBM-710/720
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Citizen Systems CBM-710/720 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Citizen Systems CBM-710/720 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Citizen Systems en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Citizen Systems CBM-710/720, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Citizen Systems CBM-710/720, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Citizen Systems CBM-710/720. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    DO T MA TRIX PRINTER MODEL CBM-710/ 720 Re v .1.00 Ne wly issued on Mar , 1989 Ser vice Man ual[...]

  • Página 2

    i CONTENTS Chapter 1. Printer Disassembly and Assembly ....................................................................................... 1 1 How to Remove Upper Cover and Rear Cover ............................................................................................ 2 2 How to Remove The Printer Mechanism .............................[...]

  • Página 3

    CBM-710/720 Service Manual 1 Chapter 1 Printer Disassebly and Assembly[...]

  • Página 4

    CBM-710/720 Service Manual 2 1. How to the Upper Cover and Rear Cover 1) Unfasten 4 screws (M3 x 6) as shown in the figure and lift the upper cover upward, while disconnecting the connector . 2) Unfasten 4 screws (M3 x 6) at both sides and remove the rear cover . Upper Cov er Connector Rear Cov er[...]

  • Página 5

    CBM-710/720 Service Manual 3 2. How to Remove the Printer Mechanism • Remove the upper cover . • Unfasten 2 screws (M3 x 14) as shown in the figure. • Lift the printer mechanism in the arrow position for removal. Printer Mechanism 3. How to Remove the Contr ol Board • Remove the rear cover . • Disconnect each connector . • Unfasten 4 pi[...]

  • Página 6

    CBM-710/720 Service Manual 4 4. How to Remove the Power Board and AC Power Unit 1) How to Remove the Power Board • Disconnect 2 connectors. • Unfasten 2 screws (M3 x 8) and 2 tapping screws (M3 x 8). • Remove the board, paying attention to the lead wire. 2) How to Remove the AC Power Unit • Unfasten 2 inlet set screws (M3 x 10) and an earth[...]

  • Página 7

    CBM-710/720 Service Manual 5 5. How to Remove the Auto Cutter Unit (720) • Remove the printer mechanism from the main body . • Remove 2 E3’ s as shown in the figure. • Pull out the shaft in the arrow direction for removal of the auto cutter unit. (Note that 2 spacers come off at the same time). Auto Cutter Unit Spacer Printer Mechanism 6. H[...]

  • Página 8

    CBM-710/720 Service Manual 6 Chapter 2 Cir cuit Description[...]

  • Página 9

    CBM-710/720 Service Manual 7 1. Outline A block diagram of this printer is shown in Fig. 1-1. It consists of the control circuit centered around CPU, ROM, RAM and peripheral circuits, interface circuit for interfacing with each host computer , operator panel circuit for operating switch input and LED display , printer mechanism, auto cutter , and p[...]

  • Página 10

    CBM-710/720 Service Manual 8 2. CPU Peripheral Cir cuits 1) CPU and ROM/RAM The CPU M50734SP has a external memory type. Lower 8-bit address is fetched via the A0/D0 bus line by the 8-bit latch LS373. The 128-KB ROM and 64-KB RAM are used for performing the backup operation for power failure by the super capacitor . The ceramic oscillator is used a[...]

  • Página 11

    CBM-710/720 Service Manual 9 As can be seen in the timing chart, it detects that Vcc decreased up to about 4.5 V for power failure and generates the power failure interrupt signal and sends it to CPU. Upon receipt of the signal, CPU transmits the data in its buffer to RAM. This processing is done within about 200 µs. After about 1 ms, the reset si[...]

  • Página 12

    CBM-710/720 Service Manual 10 3. Printer Contr ol Cir cuit 1) When L is output to the CPU port P31, the motor rotates and a timing pulse appears at the DP terminal of CN5. 2) After rotation of the motor , printing starts in timing at which the port P34 is changed into L from H by the home pulse of the printer . 3) In 9 ports of CPU output ports P20[...]

  • Página 13

    CBM-710/720 Service Manual 11 4. Cutter Control Cir cuit Cutter Side Fig. 4-1 Cutter Control Cir cuit The cutter control circuit is as shown in Fig. 4-1. In the cutter side, M indicates the motor and S the home switch. The motor can make forward and reverse rotation by controlling X and Y inputs of the control circuit as shown in the table below . [...]

  • Página 14

    CBM-710/720 Service Manual 12 5. Interface with Operation Panel As shown in Fig. 5-1, the operation panel circuit has the on-line switch and line feed switch. Each switch is connected to CPU input ports and each LED is connected through the driver to CPU output ports. Operation P anel Circuit Control circuit LED1 LED2 LED3 SW1 SW2 PO WER ON-LINE AL[...]

  • Página 15

    CBM-710/720 Service Manual 13 6. Paper End Sensor Cir cuit Fig. 6-1 shows the paper end sensor circuit. The reflection type photo-interrupter is used as a sensor . When some paper is still left, the light reflected by paper strikes upon the photo-transistor; thus, the collector of the photo- transistor is L. When paper becomes short, no light is re[...]

  • Página 16

    CBM-710/720 Service Manual 14 7. Parallel Interface Circuit This circuit conforms to the standard interface. Description will be made for each signal of interface connector as follows. Fig. 7-1 shows the data input and print timing chart and Fig. 7-2 the parallel interface circuit diagram. DA T A (D1~D8) : 8-bit parallel signal (Positive logic) STB[...]

  • Página 17

    CBM-710/720 Service Manual 15 Fig. 7-2. Parallel Interface Cir cuit Vcc R15 33k IC10 7406 IC137406 RA5 CN3 16P CN2 IC1 50734SP 12-33k Ω[...]

  • Página 18

    CBM-710/720 Service Manual 16 8. Serial Interface Cir cuit As the serial interface specification, RS-232C and 20 mA current loop can be switched by the slide switch. It can be switched by the user although fixed by setting at delivery time. 1) RS-232C By using MAX232C for data receiving (RD), data transmitting and BUSY (DTR), data is transmitted an[...]

  • Página 19

    CBM-710/720 Service Manual 17 Fig. 8-1 Serial Interface Circuit Dia gram[...]

  • Página 20

    CBM-710/720 Service Manual 18 9. RS422A Interface Circuit The RS422A interface circuit diagram is shown in Fig. 9-1. As can be seen in the figure, when TXD CONTROL is L, the line driver IC14 becomes enable, going into the ready-to-receive state. At this time, the line receiver IC15 becomes disable. When TXD CONTROL is H, IC14 becomes disable, while[...]

  • Página 21

    CBM-710/720 Service Manual 19 10. Power Cir cuit This power circuit supplies DC 5 V for the control circuit and DC 24 V for driving the printer mechanism. When the POWER switch is turned on, the AC voltage is applied to the transformer T after noise is eliminated by the capacitors C1 to C4 and noise filter NF . For the secondary voltage of transfor[...]

  • Página 22

    CBM-710/720 Service Manual 20 Chapter 3 Auto Cutter[...]

  • Página 23

    CBM-710/720 Service Manual 21 1. Maintenance and Handling 1) Precautions for Handling (1) Precautions for use Do not cut the paper other than the specified recording paper or do not pull the recording paper on the way of cutting; otherwise, resulting in damage of the blade section and reduction of service life. (2) Precautions for storage Store the[...]

  • Página 24

    CBM-710/720 Service Manual 22 2. Mechanism and Principle of Operation 1) Outline of Mechanism The AC-2 and AC-3 are designed as the DP-505 and DP-600 small dot printers and characterized by compact and lightweight types. The mechanism of this unit consists of 4 blocks; frame, power transmission mechanism, detector , and movable blade mechanism. 2) [...]

  • Página 25

    CBM-710/720 Service Manual 23 2)-3 Movable blade mechanism The movable blade is changed into a linear motion by the crank pins and starts cutting the recording paper . (1) Full cut Cam Switch Cutter Gear Fig. 2 Fig. 3 Blade Crank Pin Fig. 4 At full cut, the crank pins turn one time and return to the home position. The movable blade moves 12 mm. (2)[...]

  • Página 26

    CBM-710/720 Service Manual 24 3. Repairing (T roubleshooting) For troubleshooting, the repairing method will be explained by classifying the items as shown below . Make sure of the cause according to the items and find out the trouble portions for repairing. (1) Phenomenon ----------------- Find out the phenomenon of trouble from this column. (2) C[...]

  • Página 27

    CBM-710/720 Service Manual 25 1. The motor does not rotate. 2. The recording paper cannot be cut. Phenomenon Condition Cause Check Point and Method T roubleshooting • The motor does not rotate even if the rotation command is entered. • The motor operates temporarily and stops when the rotation command is entered. • The blade returns on the wa[...]

  • Página 28

    CBM-710/720 Service Manual 26 4. Disassembly/Assembly 1) Disassembling Procedure Perform the disassembly in a reverse manner of the assembling procedure. 2) Assembling Procedure Perform the assembly according to the assembling procedure as shown in the separate table. Numbers in Exploded V iew at the end of this chapter are used as drawing numbers.[...]

  • Página 29

    CBM-710/720 Service Manual 27[...]

  • Página 30

    CBM-710/720 Service Manual 28 Chapter 4 Cir cuit Diagram[...]

  • Página 31

    CBM-710/720 Service Manual 29 Fig. 4-1. P ower Supply Cir cuit Diagram CBM710/720-001-00[...]

  • Página 32

    CBM-710/720 Service Manual 30 Fig. 4-2. Noise Filter Circuit Diagram CBM710/720-002-00 Fig. 4-3. Operation P anel cir cuit Diagram CBM710/720-003-00[...]

  • Página 33

    CBM-710/720 Service Manual 31 Fig. 4-4. P aper End Sensor Cir cuit Diagram CBM710/720-004-00 Fig. 4-5. OP Junction Cir cuit Diagram CBM 710/720-005-00 Cord Assy CA5 PC Board PC710-06[...]

  • Página 34

    32 CN2 CN3 16P RA5 12-33k Ω 13, 18 12 10 11 32 1 31 1 4 6 5 2 7 3 +5V PE ACK → BUSY F A UL T STB RESET 2 3 4 5 6 7 8 9 14, 16, 30 33, 19-29 17 14 6 13 7 12 4 11 5 3 1, 8, 9, 10 15 2 16 15 14 13 12 11 10 9 8 SOL 1 SOL 2 SOL 3 SOL 4 SOL 5 SOL 6 SOL 7 SOL 8 SOL 9 1 3 7 9 11 15 17 21 23 3 5 7 01 2 3 I 1 2 3 2 4 6 2 6 4 3 1 5 6 9 10 12 14 16 18 20 O[...]

  • Página 35

    33 14 6 13 7 12 4 11 5 3 1, 8, 9, 10 15 2 Printer CN4 17P 1 2 3 4 5 6 7 8 9 1 5 4 6 7 2 Printer P anel Ope. Winder Cutter CN5 9P CN6 7P CN7 2P CN8 4P 2 1 1 2 3 4 12 6 CN2 CN3 Vcc Vcc Vcc VP Vcc Vcc VP Vcc 22 Vcc Vcc Vcc Vcc Vcc Vcc Vcc DS2 RA5 8-10 RA2 9-10K Ω IC8LS04 Vcc Vcc Vcc F A UL T PE 12 01 C. BUSY R. BUSY 1/2PHCI RESET 2/1PHCI 2/1PHCI CSO[...]

  • Página 36

    34 14 6 13 7 12 4 11 5 3 1, 8, 9, 10 15 2 Printer CN4 17P 1 2 3 4 5 6 7 8 9 1 5 4 6 7 2 Printer P anel Ope. Winder CN5 9P CN5 7P CN7 2P 2 1 Cutter CN8 4P 1 2 3 4 CN2 IC14 SN75113N ( ) Vcc 18 60.8 IC15 SN75175N ( ) Vcc 18 60.8.12 CN3 1 RD 10 1 2 12 9 12 13 10 10 11 11 6 5 3 3 4 4 13 14 15 10 R32 C20 R38 R39 47K R34 4.7K R40 47K 4.7K R38 4.7K R37 4.7[...]

  • Página 37

    CBM-710/720 Service Manual 35 Chapter 5 Parts List[...]

  • Página 38

    CBM-710/720 Service Manual 36 P AR TS LIST 1. Exploded V iew CBM-710/720 Ref. No. 1 2 3 4 5 6 7 8-1 12 11 13 14 15 16 17 18-1 -2 19 20-1 -2 21 22 23 24 Parts No. Description Q’ty Remarks E 4002-230 E 4002-240 E 4035-620 E 6601-210 E 4000-520 E 4018-140 E 4000-530 E 4004-180 E 4000-510 E 4000-500 E 4000-515 E 4023-040 E 4001-740 E 4001-745 E 4018-[...]

  • Página 39

    CBM-710/720 Service Manual 37 P AR TS LIST CBM-710/720 Ref. No. 25 26-1 -2 27-1 -2 -3 30 31 32 33 34 35 37 38 40 Parts No. Description Q’ty Remarks E 4000-530 E 6204-590 E 6204-600 E 6204-700 E 6204-710 E 6204-720 S 3 X 6-S S 3 X 10-S SW 3 X 6 SBST 3 X 8 S 3 X 6 S 3 X 10 SW 3 X 14 SWT 4 X 6 E 6100-530 E 6200-535 Operation Panel Unit Printer Cover[...]

  • Página 40

    CBM-710/720 Service Manual 38 CBM-710,720 27-2 27-1 26-2 26-1 23 34 24 25 33[...]

  • Página 41

    CBM-710/720 Service Manual 39 CBM-710 20-1 4 34 32 5 32 3 37 18-1 18-2 19 2 8-1 34 35 38 17 7 31 6 13 30 30 11 30 12 16 35 14 15 33 34 38 35 21 34 22[...]

  • Página 42

    CBM-710/720 Service Manual 40 CBM-720 37 20-1 20-2 4 34 32 5 18-1 18-2 19 32 3 2 8-1 34 35 17 38 1 7 31 30 11 30 12 16 30 13 6 35 38 35 14 15 33 34 21 34 22[...]

  • Página 43

    CBM-710/720 Service Manual 41 P AR TS LIST 2. Block Diagram CBM-710/720 Ref. No. CA 1 2 3 4 5 7 8 Parts No. Description Q’ty Remarks E 6100-530 E 6100-535 E 4004-180 E 4001-740 E 4001-745 E 4800-975 E 4800-980 E 4800-985 E 4800-990 E 4800-960 E 48000010 E 4800-970 AC cord 25-0102 AC cord 25-0103 Inlet NC-174C Power T ransformer 25-0091 Power T ra[...]

  • Página 44

    CBM-710/720 Service Manual 42 BLOCK DIAGRAM[...]

  • Página 45

    CBM-710/720 Service Manual 43 P AR TS LIST 4. Power Supply Unit CBM-710/720 Ref. No. IC 1 TR 1 2 3 D 1-4 6-9 5 ZD R1 2 3 4 5 C1 2 3 4 5 6 7 CN 13 F1 Parts No. Description Q’ty Remarks E 390-1 10 E 324-010 E 360-040 E 359-278 E 400-130 E 400-010 E 405-130 E 3331-041 E 3561-041 E 3203-100 E 3152-1 10 E 3821-041 E 2022-740 E 21 10-170 E 2001-650 E 2[...]

  • Página 46

    CBM-710/720 Service Manual 44 PC BOARD PC710-07A D1 - D4, D6 - D9 : GP15B D5 : 1S1588 ZD1 : RD5. 6EB2 P AR TS POSITION : POWER SUPPL Y UNIT INSULA TOR Scre w M3x8/2 Screw M3x6/2 Cord assy CA 8[...]

  • Página 47

    CBM-710/720 Service Manual 45 P AR TS LIST 4. Noise Filter Unit CBM-710/720 Ref. No. SW 1 F1 NF C 1,2 3,4 3,4 Parts No. Description Q’ty Remarks E 4003-495 E 4005-470 E 4005-475 E 4006-220 E 4009-270 E 2310-010 E 2122-735 E 2122-725 Power Switch SF-W101A-01BB Fuse EA WK-500mA Fuse 5MF-1A Fuse Holder UF-0033#01 Noise Filter PLA3021A Film Capacitor[...]

  • Página 48

    CBM-710/720 Service Manual 46 P AR TS POSITION : NOISE FIL TER UNIT FUSE HOLDER FUSE EA WK-500mA : 220-240V 5MF-1A : 100/115V PO WER SWITCH (MOUNTED ON BA CK) PC BO ARD PC710-08 C . CAP ACIT OR[...]

  • Página 49

    CBM-710/720 Service Manual 47 P AR TS LIST 5. Control Board Assy : RS232C CBM-710/720 Ref. No. IC 1 2 3 4 5 6 7 8, 13 9 10 11 12 14, 15 TA 1 2 TR 1 2-5 8,9 12,13 101-103 6,10 7,1 1 ZD 1 D 1-3 PHC 1 RA 1,5 2,3 4 Parts No. Description Q’ty Remarks E 104-200 E 107-130 E 104-220 E 2010170 E 2010220 E 2010230 E 2010240 E 2010250 E 2010260 E 2010200 E [...]

  • Página 50

    CBM-710/720 Service Manual 48 P AR TS LIST CONTROL BOARD ASSY : RS232C CBM-710/720 Ref. No. R1 2 3,40,101 4 5,7,15 32,43 102-104 6 8,17,41 42 9,1 1,18 19,24-26 31,33-36 38 10 12 13 14 16 20,21 27,28 22,23 29,30 37,39 C 1,3,19 2 4 5 6,102 7 8,16 17,101 9,10 1 1,14 20 12,13 15 18 21,22 25,26 23 24,27 Parts No. Description Q’ty Remarks E 3152-100 E [...]

  • Página 51

    CBM-710/720 Service Manual 49 P AR TS LIST CONTROL BOARD ASSY : RS232C CBM-710/720 Ref. No. CP 1,5,8 1 1,13 OSC L 1,2 BZ DS 1,2 SW 1 CN 1 2 4 5 6 7 8 9 Parts No. Description Q’ty Remarks E 21 10-300 E 501-150 E 4009-300 E 7151-120 E 5103-350 E 5104-330 E 4010-290 S 3 x 8 N 3-1-N S 3 x 10-S E 4800-915 E 4800-920 E 4800-925 E 4800-930 E 4800-935 E [...]

  • Página 52

    CBM-710/720 Service Manual 50 with Back Up (B) without Back Up (N) Jumper 1 Open C-N Short Jumper 2 C-B Short C-N Short Jump W ire Setting : RS232C P AR TS POSITION : CONTROL BOARD UNIT RS232C[...]

  • Página 53

    CBM-710/720 Service Manual 51 P AR TS LIST 6. Control Board Assy : Parallel CBM-710/720 Ref. No. IC 1 2 3 4 5,14 6 7 8 9 10,13 11 12 TA 1 2 TR 1 2-5,8 9 101-103 6,10 7,1 1 ZD 1 RA 1 2,3 4 5 6 R1 2 3,101 4 5,7,15 101-104 6 Parts No. Description Q’ty Remarks E 104-200 E 107-130 E 104-220 E 2010170 E 2010220 E 2010230 E 2010240 E 2010250 E 2010260 E[...]

  • Página 54

    CBM-710/720 Service Manual 52 P AR TS LIST CONTROL BOARD ASSY : P ARALLEL CBM-710/720 Ref. No. R 8,17 9,1 1,18 19,24-26 31 10 12 13 14 16 20,21 27,28 22,23 29,30 C 1,3,19 2 4 5 6,102 7 8,16,17 9,10 1 1,14 18 12,13 15 20,101 CP 1,5,8 10,12 OSC L 1,2 BZ Parts No. Description Q’ty Remarks E 3101-041 E 3103-041 E 3623-041 E 3181-041 E 3683-041 E 3333[...]

  • Página 55

    CBM-710/720 Service Manual 53 P AR TS LIST CONTROL BOARD ASSY : P ARALLEL CBM-710/720 Ref. No. DS 1 CN 1 2 4 5 6 7 8 9 Parts No. Description Q’ty Remarks E 5103-350 E 4010-290 S 3 x 8 N 3-1-N E 4800-915 E 4800-895 E 4800-925 E 4800-930 E 4800-935 E 4800-940 E 4800-945 E 4800-950 Dip Switch KSD-8 Heat Sink 50-0032 Pan Head Screw M3 x 8 Nut M3 Conn[...]

  • Página 56

    CBM-710/720 Service Manual 54 with Back Up (B) without Back Up (N) Jumper 1 Open C-N Short Jumper 2 C-B Short C-N Short Jump W ire Setting : P ARALLEL P AR TS POSITION : CONTROL BOARD UNIT P ARALLEL[...]

  • Página 57

    CBM-710/720 Service Manual 55 P AR TS LIST 7. Control Board Assy : RS422A CBM-710/720 Ref. No. IC 1 2 3 4 5 6 7 8,13 9 10 11 12 14 15 TA 1 2 TR 1 2-5 8,9 101-103 6,10 7,1 1 ZD RA 1,5 2,3 4 R1 2 3,101 4 5,7,15 102-104 Parts No. Description Q’ty Remarks E 104-200 E 107-140 E 104-220 E 2010170 E 2010220 E 2010230 E 2010240 E 2010250 E 2010260 E 2010[...]

  • Página 58

    CBM-710/720 Service Manual 56 P AR TS LIST CONTROL BOARD ASSY : RS422A CBM-710/720 Ref. No. R 6,35 38-40 8,17 9,1 1 18,19 24-26 31 10 12 13 14 16 20,21 27,28 22,23 29,30 34,36 37 32,33 C 1,3,19 2 4 5 6,102 7 8,16 17 9,10 1 1,14 18 12,13 15 20,21 101 CP 1,5,8 1 1,13 Parts No. Description Q’ty Remarks E 3473-041 E 3101-041 E 3103-041 E 3623-041 E 3[...]

  • Página 59

    CBM-710/720 Service Manual 57 P AR TS LIST Control Board Assy : RS422A CBM-710/720 Ref. No. OSC 1 L 1,2 BZ DS 1,2 CN 1 2 4 5 6 7 8 9 Parts No. Description Q’ty Remarks E 501-150 E 4009-300 E 7151-120 E 5103-350 E 4010-290 S 3 x 8 N 3-1-N E 4800-915 E 4800-955 E 4800-925 E 4800-930 E 4800-935 E 4800-940 E 4800-945 E 4800-950 E 4024-050 M 3 x 10 Cr[...]

  • Página 60

    CBM-710/720 Service Manual 58 with Back Up (B) without Back Up (N) Jumper 1 Open C-N Short Jumper 2 C-B Short C-N Short Jump W ire Setting : RS422A P AR TS POSITION : CONTROL BOARD UNIT RS422A[...]

  • Página 61

    CBM-710/720 Service Manual 59 P AR TS LIST 8. OPERA TION P ANEL UNIT/PE DETECTOR UNIT/OPERA TION P ANEL JUNCTION UNIT CBM-710/720 Ref. No. D 1,2 3 R 1,2 3 SW 1,2 CA 5 PH 1 CA 7 CN 12 CA 5 Parts No. Description Q’ty Remarks E 480-250 E 480-260 E 3221-041 E 3471-041 E 5102-410 E 4800-960 E 4000-520 E 391-090 E 6650-040 E 48000010 E 4000-530 E 4800-[...]

  • Página 62

    CBM-710/720 Service Manual 60 P AR TS POSITION : OPERA TION P ANEL UNIT LED (GREEN) LED (RED) T ACT SWITCH CORD ASSY CA 5 PC BOARD PC710-04[...]

  • Página 63

    CBM-710/720 Service Manual 61 P AR TS POSITION : PE DETECTOR UNIT PHO TOINTERR UPTER GR2S05 CORD ASSY CA 7 PC BOARD PC710-05[...]

  • Página 64

    CBM-710/720 Service Manual 62 OP Junction Block 5267-07A CORD ASSY CA 5 PC BOARD PC710-06[...]

  • Página 65

    CBM-710/720 Service Manual 63 P AR TS LIST 9. Auto Cutter AC-2/AC-3 Ref. No. 1 2 3 4 5 6 7 8 9 10 10-1 10-2 10-3 10-4 11 12 13 14 15 16 17 18 19 20 21 22 Parts No. Description Q’ty Remarks E 8010-010 E 8010-020 E 801 1-010 S 2.6 x 8 E 8012-010 E 8013-010 E 3 E 8014-010 E 8015-010 E 2.5 E 8016-010 E 8016-020 E 8017-010 E 8017-020 E 8018-010 E 8019[...]

  • Página 66

    CBM-710/720 Service Manual 64 AC-2 12 3 7 5 6 4 10-2 13 1 6 19 15 16 2 10 10-1 10-3 11 8 9 17 18 6 3 21, 22 14 20[...]

  • Página 67

    CBM-710/720 Service Manual 65 AC-3 12 3 1 10-4 15 16 10-2 13 2 10-3 10 10-1 11 8 9 17 18 14 21, 22 3 6 12[...]

  • Página 68

    CBM-710/720 Service Manual 66 P AR TS LIST 10. Winder A W -2 Ref. No. 1 2 2-1 -2 -3 3 6 7 8 9 10 11 12 13 14 15 16 Parts No. Description Q’ty Remarks E 8500-010 E 8510-010 E 8017-010 E 8512-010 E 8513-010 E 8514-010 E 8515-010 E 8516-010 E 4 E 8520-010 E 8521-010 E 8522-010 E 8530-010 E 8531-010 E 8532-010 S 3 X 6-S E 4031-060 A W Frame Assy Moto[...]

  • Página 69

    CBM-710/720 Service Manual 67 A W -2 10 14 12 13 15 9 1 15 3 6 8 2 2-3 2-1 2-2 7 15 16 11[...]