Clover Electronics CDR1650 manual

Conte nts 1 INSTRUCTION MA NUAL S t and-Alone 16 Channel DIGIT AL VIDEO RECORDER MODEL CDR1650 V er . 041308, 042909,1 02609 Copyright © 2008 Clover Electronics U.S.A. All Rights Reserved.[...]

2[...]

Conte nts 3 CONTENTS AB OU T TH IS MA NU A L .. .................. .................. ........ ...... .................. ............... .................. ...... ... ....... 9 1. UN PA C KI NG............ .................. .................. ... ........ .................. ............... .................. .... ..... ........... 11 S TA N D - AL[...]

Stand-a lone DVR I nstructio n M anual 4 6-6.2. SPLIT SCRE ENS ........ ........... ............ ......... ............ ............ ......... ............ .......... ........... . ...... .......... 40 6-7. LIVE ....................... ....................... ........................... ............................ ............................ 41 6[...]

Conte nts 5 7-2.1. TIME / DA TE ............ .......... ........... .......... ............ ........... .......... ........... .......... ............ ................ ..... 78 7-2.2. SYSTEM CONFIG ........ ............ ......... ............ ......... ............ ......... ............ ......... ............ ... .... .......... 80 7-2.2.1. F ACTO[...]

Stand-a lone DVR I nstructio n M anual 6 7-6.8.3. T imer Recordin g (Schedule Recording) ............... ............ ......... ............ ............ ........... ........ 104 7-6.8.4. T imer Event Recordin g ............... ......... ............ .......... ........... .......... ............ ........... ....... ........ 104 7-6.9. Recordi ng b[...]

Conte nts 7 8-4.9.1. T erminal mode ........ ............ ........... .......... ............ ......... ............ ........... .......... .......... ......... ..... 150 8-4.9.2. Multi mode ............ ........... .......... ........... ............ .......... ........... .......... ........... .......... ................. 151 8-4.10. Cop y in th[...]

Stand-a lone DVR I nstructio n M anual 8[...]

9 About this manual This is the Instruction Manual for S tand-alone type DVR model CDR1650 . This Manual describes how to inst all and operate the S tand-Alone DVR and provides specifications and features . Please read this manual tho roughly and follow the inst allation process before using S tand- alone DVR (Note: Be su re to correctly follow ste[...]

Stand-a lone DVR I nstructio n M anual 10[...]

11 1. Unpacking Care should be taken when unp acking to avoid damaging the unit. Please check that the following items are in cluded: ▶ S tand-alone DVR unit ▶ All Accessories : Bracket, Pow er Cable, Screws ▶ Remote Co ntroller & Battery ▶ PS2 Mous e ▶ DSUB 26p Connector (Sensor Input, Relay Output Se lection) ▶ Instruction Manual [...]

Stand-a lone DVR I nstructio n M anual 12 Stand-alone DVR (Digital Video Recorder) Unit CDR1650 is the most reliable and functional embedded DVR system av ailable today . Th e system displays 16 channels of live images in Real T ime speed, compresses data digitally and records them to the Hard Disk Drive, which can be replayed and searched easily a[...]

13 2. Features ▶ Multi Functional Record - Powerful, multiple Record Modes available: Manual (Continuous), T imer , and Motion Detection Recording. ▶ User fri endly GU I - A few simple button s for Easy con trol. ▶ Automatic System Recovery - Automatic and Complete System recovery within 10 seconds. ▶ Easy PTZ co ntrol via RS port - No need[...]

Stand-a lone DVR I nstructio n M anual 14[...]

15 3. What to do at the time of Installation St and-alone DVR should be inst alled in the following order; 1. Make sure all the required hardware is availa ble. - S tand-alone DVR unit (including HDD) - Up to 16 cameras (including power source) - CCTV or VGA monitor (or TV se t) - Network cable if connecting to a PC 2. Connect the cameras, the DVR [...]

Stand-a lone DVR I nstructio n M anual 16[...]

17 4. Specifications [F ig 4-1 Specifications] Design and the specifications are subjec t to change w ithout notice. 4 IT E M Television System NT SC PAL Refresh Rate 60 fi elds/ sec 50 fi elds/ sec Video Resol ut i on 720x 480 720x 576 Video Input s Video Input Signal Video Outputs Video Output Signal Liv e 480 Frame s/ sec dis play 400 Fram es/ s[...]

Stand-a lone DVR I nstructio n M anual 18[...]

5. Installation 19 5. Installation CONTENTS 5-1. C ONTROLS AND C ONNECTO RS (F OR 8C H & 16C H DVR)....................... ........................... ...... 20 5-2. N OTE FOR I NST ALL A TION .......... ........................... ....................... ........................... ............... 22 5-3. S YSTEM C ON NECTI ON ............. ..[...]

Stand-a lone DVR I nstructio n M anual 20 5-1. Controls and Co nnectors (For 8Ch & 16Ch DVR) z Front - A a. 1 Channel( FULL Screen) b. 2 Channel (FULL Scre en), UP Key c. 3 Channel (FULL Screen ) d. 4 Channel( FULL Screen) e. 5 Channe l(FULL Scre en), L EFT Key f. 6 Channel (FULL Scree n), ENTER Key g. 7 Channel (FULL Scree n), RIGHT Key h. 8 C[...]

5. Installation 21 - B z Rear a. Display (Full / S plit) b. Emergency Record c. Zoom d. Quick Rep lay e. OSD On/Of f f. Audio g. S top (ESC) h. PTZ CAMERA INPUT VOLTAGE SELECT POWER INLET RS-422C PORT USB PORT ETHERNET PORT SENSOR IN/OUT VGA SPEAKER AUDIO INPUT L OOP OUT INPUT MAIN VIDEO INPUT AUX VIDEO INPUT [Fig 5-2 Re ar View][...]

Stand-a lone DVR I nstructio n M anual 22 5-2. Note for Installation  Install the system according to the instructions described in this manual.  This product is designed for indoor use and should not be used outdoors.  Avoid an y area with hi gh hum idity or dus t whic h can sh orten lifet ime of the uni t.  Choose a well ventilated ar[...]

5. Installation 23 5-3. System Connection [Fig 5-3 System Connect ion][...]

Stand-a lone DVR I nstructio n M anual 24 5-4. Installation 5-4.1. Camera Connection ▫ Connection of N ormal Ca meras Connect the cameras to the V ideo Input (BNC connector) on the back of the unit as shown above [Fig. 5-3 System Connection]. ▫ Connection of L oop Output The Camera or video output is available from the Video Output (Loop Output[...]

5. Installation 25 ▫ VGA Monitor C onnection Connect the VGA Monit or’s connector to the “DSUB 15 Pin Connector” on the rear o f the unit. Output for VGA Monitor is the same as that o f the main monitor , however it output s a better quality signal. Pin configurat ion of VGA Connector. [Fig 5-4 VGA Conne ctor PIN] - Number Description Numbe[...]

Stand-a lone DVR I nstructio n M anual 26 - 5-4.3. Sensor Connection and R ELAY IN &OUT ▫ SENSOR Connection (S ENSOR IN) Connect up to 16 sensor to A LM (SENSOR) IN. The Sensor should be a contactor type and support N.O. (Normal Open). [Fig 5-5 SENS O R IN/OUT PIN] ● Pin 1 Sensor 1 ● Pin 2 Sensor 2 ● Pin 3 Sensor 3 ● Pin 4 Sensor 4 ?[...]

5. Installation 27 ▫ RELAY OUT Conne ction When necessary, use RELAY OUT. The Output of RELAY OUT is a relay contactor type and supports N.O. (Normal Open) & N.C. (Normal Close). The Output capacity is 220V 1A. A higher capacity can ca use syste m failure . [Fig 5-6 RELAY OUT Connection][...]

Stand-a lone DVR I nstructio n M anual 28 5-4.4. RS232C, RS485, RS422 Connection ▫ Connect the cable to the “RS232C/RS485/RS422 PORT” on the rear of the unit. Specification of the RS232C/RS485/RS422 connector is standard for “DSUB9” The Maximum Length of cable is 45 ft w ith RS232C but RS485 or RS422 is about 300 ft. [Fig 5-7] [Fig 5 -8 ][...]

5. Installation 29 5-4.5 Connection to an Ethernet Network ▫ Connecting the cable to Ethernet. Our Ethernet connector is a RJ45 type. The maximum cable length is 300 ft. W hen you want to use a longer cab le, we suggest using repeater . [Fig 5- 9][...]

Stand-a lone DVR I nstructio n M anual 30 5-4.6. POWER CONNECTIO N Select proper voltage (see fig 5-10) and connect to a reliable power source. It should not be shared with other electrical equipment on the same line. Poor performance can occur if the connected voltage is more than 10% plus or minus the required voltage . Frequent power cuts can ca[...]

31 6. How to operate CONTENTS 6-1. G ENERAL I NFORMA TION ...... ........................... ............................ ........................... ............... 33 6-2. O PERA TING I NTERF ACE ... ........................... ....................... ........................... ........................ 34 6-3. IR R EMOTE C ONTROLLER ............[...]

Stand-a lone DVR I nstructio n M anual 32 CONTENTS 6-7. LIVE ................... ............................ ........................... ....................... ................................. 41 6-7.1. FULL SCREEN ......... ............ ......... ............ .......... ........... ............ ......... ............ .......... ... .... .......[...]

6. How to Operate 33 6-1. General Information ▫ Y ou can operate all functions of the system by use of buttons located on the fron t panel, remote controller and a mouse. Additionally , you can remotely control this unit via RS422C or the Ethernet port located on the back of the unit. ▫ System status is indicated by either LED lights on the ope[...]

Stand-a lone DVR I nstructio n M anual 34 6-2. Operating Interface There are 3 ways to operate the system by pressing the buttons on the front panel or buttons on the remote controller and clicking th e mouse. A lot of users mostly prefer to use a mouse on these kinds of products such a s DVRs, computers and computer-aided devices. Th erefore we wo[...]

6. How to Operate 35 6-3. IR Remote Controller 1. Record 2 . P o w e r O n / O f f 3. Display form at (S plit) 4 . S y s t e m s t a t u s 5 . P a n / T i l t 6 . Z o o m / F o c u s 7. Search for replaying 8 . U p 9 . Q u i t 10. Left 11. Enter 12. Right 13. Quick Replay 14. Down 15. Menu (Setup) 16. OSD On/Off 17. Zoom 18. Freeze / IR ID Config 1[...]

Stand-a lone DVR I nstructio n M anual 36 6-4. Power On/Off 6-4.1. POWER ON On the front p anel or the remote controller: Press the POWER button on the front pane l for approx. 3 seco nds until the LED ligh ts are turned on or just press the POWER button on the remote con troller . 6-4.2. POWER OFF On the front p anel or the remote controller: Pres[...]

6. How to Operate 37 6-4.3. APPEARANCE OR DISAPPEARANCE OF POWER BUTTON The P ower O n/Off but ton a nd the Audio button s (Se e sect ion 6-7. 4) as shown i n Fig. 6-3- 1 will always stay on the MENU bar when the system is not connected through the DVR Master (Client Host Program or Internet Explorer). But the Pow er On/Off b utton and the Audio bu[...]

Stand-a lone DVR I nstructio n M anual 38 6-5. Menu Bar On/Off Right-click on the screen in the L IVE or the RECORD mode and the MENU ba r will be appeared. Right-click again and it w ill be disappeared. [Fig.6-4 LIVE Screen] CLICK CLICK[...]

6. How to Operate 39 6-6. Display Screen 6-6.1. FULL SCREEN [Fig.6-5 FULL screen] RECORD ICON CURRENT TIM E AUDIO COPY STATUS SE Q UENCE ICON CAMERA TITLE[...]

Stand-a lone DVR I nstructio n M anual 40 6-6.2. SPLIT SCREENS FULL SCREEN QUAD SCREEN SEQUENCING SCREEN 16 SCREEN 4page SEQUENCING SCREEN 2page SEQUENCING SCREEN 9 SPLIT SCREEN[...]

6. How to Operate 41 6-7. LIVE 6-7.1. FULL SCREEN ▫ Full SCREEN is available in the LIVE mode or the RECORD mode. ▫ Click a certain camera’s screen in the LIVE mode or in the RECORD mode, then a FULL SCREEN will be displayed. ▫ Click t he FULL screen to return to the SPLIT SCREEN. 6-7.2. SPLIT SCREEN ▫ SPLIT SCREEN is available in the LIV[...]

Stand-a lone DVR I nstructio n M anual 42 6-7.3. SEQUENCING SCREENS ▫ Dis playing the cameras in SEQUENCE is available in the LIVE mode or the RECORD mod e. Each of the channels will be d isplayed in sequence and the dwell time can be adjusted in the camera set up menu (Refer to section 7-4.7). ▫ This ICON is displayed in the upper left hand co[...]

6. How to Operate 43 6-7.4. LIVE AUDIO ▫ If cameras (up to 16 cameras) have audio function, it wi ll sound in the live mode. ▫ Click the CHANNEL butto n you wish to listen on the MENU bar as shown below (See Fig.6-9). The CHANNEL can be changed by clicking the mouse repeatedly. ▫ Turn the AUDIO (speaker) ON by clicking the SPEAKER ic on as sh[...]

Stand-a lone DVR I nstructio n M anual 44 6-7.5. ZOOM The image on the scre en will be zoo med up to 2 times w hen the ZOOM button is clicked in the LIVE mode (This function is avai lable on the full screen mode only). ▫ Click t he ZOOM but ton on t he ME NU bar in t he LIVE mode. ▫ Move the mouse on the ZOOMED screen, and then the 8-directiona[...]

6. How to Operate 45 6-7.6. OSD ON / OFF OSD ON /OFF is possible in the LIVE mode or RECORD mode. ▫ Click the OSD button on the MENU ba r to turn the OSD (On Scre en Display) ON or OFF. When the OSD is in OFF position, all the texts on the screen will be disappeared. [Fig.6- 11 OSD ON SCRE EN] 2007/05/25 19:30: 41 CAM 01 CAM 02 CAM 03 CAM 04 CAM [...]

Stand-a lone DVR I nstructio n M anual 46 6-7.7. PAN / TILT ▫ Click the PAN/TILT button on the MENU bar in the LIVE mode to access the PAN/TILT cameras. ▫ Click the (EXIT) button to return to the LIVE mo de. [Fig.6-13 PAN/TILT butto n] [Fig.6-14 PAN/TILT window][...]

6. How to Operate 47 ▫ Channel Selection and Screen Conversion To change a channel, press the CHANNEL button on the front panel or click the CHANNEL button on the [F ig.6-1 5 PA N /TILT CONTRO L windo w]. It w ill be converted a full scr een. To ret urn t o the LI VE mo de, pres s the SPLIT button on the f ront p anel or clic k the (EXIT) button.[...]

Stand-a lone DVR I nstructio n M anual 48 ▫ PRESET [Fig.6-15-1 Preset Men u] It is a function to preset the PTZ camera(s) which you wish to monitor frequently. Pres et Se tup - Select a position of camera you wish to preset and click the SET button in Fig.6-15-1. - Click the number(s) for the current po sition of camera. - Delete the numbers by u[...]

6. How to Operate 49 6-7.8. SYSTEM STATUS ▫ Click the SYSTEM STATU S button on the MENU bar to see the system status as show n below (Fig.6-16). ▫ Click the (EXIT) button to retu rn to the LIVE mode or RECORD mode. [Fig.6-16 SYSTEM STAT US button] [Fig.6-17 SYSTEM S TATUS window][...]

Stand-a lone DVR I nstructio n M anual 50 6-7.9. POWER LOSS LISTS The list indicates the time/date w hen the system power wa s turned OFF. ▫ Click the POWER LOSS LI STS button on the SYSTEM STATUS w indow to view the POWER LOSS LISTS. ▫ Each of the pages contains 10 lists. You can search the pages by clicking the UP/DOWN button. ▫ Click the ([...]

6. How to Operate 51 ▫ CL EAR LIST S butto n Click the CLEAR LISTS button to clear the lists, you will be prompted to confirm changes. When you click the OK button, the POW ER LOSS LISTS will b e deleted. T o cancel, click the CANCEL button Fig.6-19 PO WER LOSS LISTS Message[...]

Stand-a lone DVR I nstructio n M anual 52 6-7.10. VIDEO LOSS LIST The list indi cates the video loss ch annel a nd th e time/da te when the vid eo sig nal wa s disconnected. ▫ Click the VIDEO LOSS LISTS bu tton on the SYST EM STATUS win dow to view the VIDEO LOSS LISTS. ▫ Each of the pages contains 4 lists. You can search the pages by clicking [...]

6. How to Operate 53 ▫ CL EAR LIST S butto n Click the CLEAR LISTS button to clear the lists, you will be prompted to confirm changes. When you click the OK button, the VIDEO LOSS LIST S will be deleted . T o cancel, click the CANCEL button [Fig.6-22 VIDEO LOSS LISTS Message w indow][...]

Stand-a lone DVR I nstructio n M anual 54 6-8. Record This system provides W atc hdog function . When power goes off during recording and the power turns on, the system w ill automatically start recording. 6-8.1. Manual (Continuous ) recording ▫ Click the SETUP icon on the MENU bar in the LIVE mode. ▫ Click the RECORD button in the SETUP menu a[...]

6. How to Operate 55 this recording mode. ▫ P ress the RECO RD butt on on th e front panel or c lick the RE CORD ic on on the MENU bar . 6-8.3. Timer Recording ▫ Click the SETUP icon on the MENU bar in the LIVE mode. ▫ Click the RECORD button in the SETUP menu and the RECORD window will be displayed. ▫ Select the TIMER RECORDING ( ) between[...]

Stand-a lone DVR I nstructio n M anual 56 6-8.4. Timer Event Recording ▫ Click the SETUP icon on the MENU bar in the LIVE mode. ▫ Click the RECORD button in the SETUP menu and the RECORD window will be displayed. ▫ Select the TIMER RECORDING ( ) between the MANUAL RECORDING ( ) and the TIMER RECORDING ( ) as s hown in F ig.6- 26. Al l channel[...]

6. How to Operate 57 6-8.5. Recording Icons The Recording Icons depends on recording modes are displayed in the upper left hand corner of the screen. ▫ To turn the Record ing Icon OFF, cl ick the DISPLAY ON in the RECORD menu and then it will be turned OFF. You can select the value ON or OFF by repea tedly clicking the mouse. [Fig.6-28 Recording [...]

Stand-a lone DVR I nstructio n M anual 58 6-9. REPLAY 6-9.1. QUICK REPLAY It is available only by pressing the PLAY button on the front panel or t he QICK SEARCH button on the remote contro ller. ▫ Press the PLAY button, then the recent recorde d list will be pla yed. 6-9.2. REPLAY ▫ Click the REPLAY icon on the MENU bar, then the REPLAY window[...]

6. How to Operate 59 6-9.2.1. Playback Devices In order to payback, plug the USB devices such as external USB HDD, USB memory to the USB port or insert a recorded media (CD-R/W or DVD-R/W) into the DVD-R/W drive. When the devices are ready to playback, the Ready on the corresponding devices w ill be displayed as shown in Fig.6-30. ▫ Click the mou[...]

Stand-a lone DVR I nstructio n M anual 60 ▫ Select the hour on the S tart T ime Select Window (See Fig.6-32) by clicking the mouse on the Hour (0 – 23 hour) you wish to start to play . The green active buttons indicate t he HOUR that contain s recorded data, and the red active buttons indica te the selected S tart HOUR. By using the Replay Time[...]

6. How to Operate 61 6-9.2.3. Replaying Replaying st art time set-up ca n be possible within a recording time e xtent. ▫ Replay buttons (NORMAL / MOTION / SENSOR) NORMAL PLAY: Click the button to play all the recorded data. MOTION PLAY: Click the button to play the re corded data by MOTION only. SENSOR PLAY: Click the button to play the re corde [...]

Stand-a lone DVR I nstructio n M anual 62 ▫ How to control the buttons while replaying ① Sear ch Slider It is possible to playback by clicking the slider on the bar and dragging it. ② PLA Y / P AUSE Click the butt on to p ause. Click the button to replay when in the pause mode. ③ REW/FF During replaying, press the or button, or turn the shu[...]

6. How to Operate 63 ④ PREV / NEXT During replayin g, press th e button to view previous frame in still im age and press the button to view the next frame in still image. ⑤ S peaker ON / OFF Turn speaker ON or OFF. ⑥ Sp e a k e r Vo l u m e Adjust the Audio Volume by clicking the ▲ or the ▼ button when the AUDIO is turned ON. 6-9.2.4. Dis[...]

Stand-a lone DVR I nstructio n M anual 64 - Click the mouse on one out of channels during replaying to view a full screen. - Click the mouse on the full screen during replaying to return to the split screen. [Fig.6-36 SPLIT screen during replaying] [Fig.6-37 FUL L screen during repl aying][...]

6. How to Operate 65 6-10. COPY ▫ Click the COPY icon on the MENU bar, and then the COPY window as shown in Fig.6-38 will be displayed. ▫ Click the (EXIT) button to return to th e previous mode. 6-10.1. Copying dev i ces In order to copy the recorded data, plug the USB devices such as external USB HDD , USB memory to the USB port or insert a bl[...]

Stand-a lone DVR I nstructio n M anual 66 ▫ Connect the USB devi ces to the DVR ▫ Click the SETUP icon on the MENU bar, and the SETUP menu w ill be displayed. ▫ Click the DISK MANAGER in the SETUP menu, and the DISK MENAGER will be disp layed. ▫ Click the mouse on the USB bu tton in th e DISK MANAGER, and you will be aske d. ▫ Click the O[...]

6. How to Operate 67 ① All channel s, HOUR se lection b utton. Click the arrow button on the upper le ft corner as shown in Fig.6-40 to set the full extent of the recording and all the channels simultaneously . ② HOUR selection button Select the sta rt time to co py by clickin g the mouse on HOUR (0-23: in th e military ho ur). Thereafter the e[...]

Stand-a lone DVR I nstructio n M anual 68 By using the S t art/End set-up ba r: The starting time to cop y can also be set by clicking the slid er on the bar and dragging it or just cli ck the bar . 6-10.3. Set the Copy End Time (Copying exte nt) Refer to the above explanation (See section 6.10.2.). [Fig.6-41 Copy S tart/End setup buttons] [Fig.6-4[...]

6. How to Operate 69 6-10.4. Copying the recorded da ta during replaying The system, CDR1650 allows users to copy the recorded data during replaying. ▫ Start replaying (See section 6-9). ▫ Right-click on the replaying screen, and the COPY DATA screen will be displayed (See Fig.6-43). ▫ To set the starting time and date to copy , select the va[...]

Stand-a lone DVR I nstructio n M anual 70 ▫ Choose one among NETWORK, USB, CD and DVD which are ready to copy (See section 6-10.1). Sele ct COPY Mode Only when the devices and Media s are ready to copy , the Ready on the corresponding devices and Medias w ill be displayed. NETW ORK COPY Save the recorded data in PC throug h the DVR Mast er by Net[...]

6. How to Operate 71 DVD-RW COPY Save the recorded data on DVD-R/W Medias. Click the DVD-R/W button to start cop y. ▫ As soon as one of the above buttons is click ed , copying will start along with displaying the icon shown in Fig.6-45. The following icon indicates that copying is in process. [Fig.6-45 Copying Icon][...]

Stand-a lone DVR I nstructio n M anual 72[...]

73 7. SETUP CONTENTS 7-1. SETUP .................... ........................... ....................... ............................ ............................ 76 7-2. SYSTEM ................................... ............................ ........................... ........................... .... .. 77 7-2.1. TIME / D A TE ........... .......[...]

Stand-a lone DVR I nstructio n M anual 74 CONTENTS 7-4. CAMERA .................................. ............................ ........................... ........................... ..... .8 9 7-4.1. Camera ON/OFF ........... ............ ......... ............ ......... ............ ............ ......... ............ ......... ....... ......... [...]

7. Setu p 75 CONTENTS 7-7. NETWOR K .... ........................... ............................ ........................... ....................... ........ 1 16 7-7.1. IP Mode ................... ............ ......... ............ ............ ......... ............ ......... ............ ....... ......... .......... .... 1 16 7-7.2. GA TEWA Y [...]

Stand-a lone DVR I nstructio n M anual 76 7-1. SETUP It is possible to set up the menus in the LIVE mode and partly in the RECORD mode. ▫ Click the “SETUP” button on the MENU bar and then the SETUP menu will be displayed. ▫ Click t he “EXI T” button to retu rn to the previous mode. [Fig.7-2 SETUP menu] [Fig.7-1 Setup Icon on MAIN MENU][...]

7. Setu p 77 7-2. SYSTEM ▫ Click t he “SYSTEM” bu tton in the SETUP menu, and then the SYSTEM menu show n in Fig.7-3 will be d isplayed. ▫ Click t he “EXIT” button to retu rn to the SETUP menu. . [Fig.7-3 SYSTEM menu][...]

Stand-a lone DVR I nstructio n M anual 78 7-2.1. TIME / DATE ▫ Click t he “TIM E/DATE” button in the SYSTEM menu , and then the TIME/DATE me nu will be displayed (See Fig.7-4). ▫ Click the “EXIT” button to return to the SYSTEM men u. ▫ TIME FORMAT Click the mouse on the TIME FORMAT button to change and then sele ct 24 HOUR or 12 HOUR [...]

7. Setu p 79 ▫ DATE FORMAT There are three fo rmats to display the time and date a s follow. • MM / DD / YYYY: For U.S. A. • YYYY / MM / DD: For Asia n countries. • DD / MM / YYYY: For European countries. Click the mouse on the DATE FORMAT button to change, and then select a D ATE FORMAT among YYYY/MM/DD, DD/MM/YYYY and MM/DD/YYYY. ▫ DATE[...]

Stand-a lone DVR I nstructio n M anual 80 7-2.2. SYSTEM CONFIG ▫ Click t he “SYST EM CONFIG” button in the SYSTEM menu, and then the SYSTEM CONFIG menu will be displayed (See Fig.7-10). ▫ Click the “EXIT” button to return to the SYSTEM men u. 7-2.2.1. FACTORY DEFAULT ▫ Click the “ FACTORY DEFAULT ” button in the SYSTEM CONFIG menu[...]

7. Setu p 81 7-2.2.2. LOAD CONFIG / BACKUP CONFI G You can save up to four different settin gs in the BACKUP CONFIG and load the file s in the LOAD CONFIG to ch ange the settin gs to the sy stem. ▫ LOAD CONFIG This function is to lo ad the changed settings to the syste m. - Click the LOAD CONFIG button and then the LOAD CONFIG window will be disp[...]

Stand-a lone DVR I nstructio n M anual 82 ▫ BACKUP CONFI G This function is to save the c urrent settings to load the se ttings to th e system. Sa ve the current settings in the BACKUP CONFI G in order to load it to the system in the near future whenever you need to ch ange the settin gs. - Click the BACKUP CONFIG button and then the BACKUP CONFI[...]

7. Setu p 83 7-2.3. PASSWORD ▫ ON/OFF Select ON or OFF b y clicking th e mouse. If the ON is se lected, the password has to be en tered to get into the SETUP mode, RECORD mode, COPY mode, REPLAY mode, and when trying to connect the network through the DVR Maste r . ▫ PASSWORD CHANG E Click the password “********” b utton and then the On Scr[...]

Stand-a lone DVR I nstructio n M anual 84 7-2.4. IR REMOTE ID Up to 16 DVR systems can be controlled by only one remote controller we provided, but IDs should be assigned on each of the syste ms. You don’t have to assign any ID on the single unit and you can control the system w ith the pro vided remote controller without IR REMOTE ID, which is i[...]

7. Setu p 85 7-2.5. FIRMWARE UPDATE There are two ways to update the firmware through USB m emory and the DVR Master (GUI). We recommend use rs to update the firmware only in the LIVE mode. ▫ By USB mem ory - Format the USB w ith your computer and save the firmware file on it (not including folder). - Plug i t on the US B port on the DVR. - Click[...]

Stand-a lone DVR I nstructio n M anual 86 7-3. DISK MANAG E R ▫ Click the “DISK MANAGER” bu tton in the SETUP menu and then the DISK MANAGER window will be displ ayed (See Fig.7-22). ▫ Click the (EXIT) button to return to th e SETUP men u. ▫ A DV D R/W and 3 Hard Disk Drives can be installed, and all information in regards to the drives w[...]

7. Setu p 87 7-3.1. HDD WRITE FAIL If HDD is in full and the OVERWRITE on the HDD is turned OFF in the re cording mode, the system will activate the relay output (See section 5-4.3) for a siren or other device. ▫ Click the HDD WRITE FAIL button in t he DISK MANAGER window and select one among RELAY 1 OUT, RELAY 2 OUT, RELAY 3 OUT, RELAY 4 OUT or [...]

Stand-a lone DVR I nstructio n M anual 88 [Fig.7-25 HDD FORM AT wi nd ow ][...]

7. Setu p 89 7-4. CAMERA ▫ Click the “CAMERA” button in the SETUP menu and then the CAMERA menu will be displayed (See Fig.7-26). To change the settings in the CAMERA menu, stop recording by clic king th e RECORD icon on t he MENU B AR. It is possi ble only i n the LI VE mode. ▫ Click the UP/DOWN bu tton on the right ha nd side of the menu [...]

Stand-a lone DVR I nstructio n M anual 90 7-4.1. Camera ON/OFF ▫ Click on e ach of the channels to select the “ O ” or “ X ” in the CAMERA menu . If the “ O ” is selected, the corresponding video channels (CAM 01 through CAM 016) will be displayed on the screen. If the “ X ” is selected, the corresponding video channels (CAM 01 th[...]

7. Setu p 91 7-4.3. Buzzer In order to a lert users, the Buzzer w ill sound at tha t time video signal lost. ▫ Click on e ach of the channels you wish to turn the b uzzer “ON” or “OFF”. If the “ O ” is selected, the b uzzer will sound when video signal lost and if the “ X ” is selected, the bu zzer won’t sound. 7-4.4. Relay The [...]

Stand-a lone DVR I nstructio n M anual 92 7-4.5. Pan/Tilt Settings ▫ Click the PAN/TILT button on the corresponding channels in the CAMERA menu, then the PAN/TILT window will be displayed as shown in Fig.7-33. ▫ Click the (EXIT) button to return to th e CAMERA me nu. ▫ PTZ ID - Click the PTZ ID button in the PAN/TILT window, then On Screen Ke[...]

7. Setu p 93 ▫ Pan/Tilt Vendor select Click the “PAN/TILT & REMOTE” button in the PAN/TILT window , then the vendor lists will show up. Select a vendor on the vendor lists by clicking the mouse. ▫ Model Click the “MODEL” button in the PAN/TILT w indow and select the model on the pop-up lists by cl icki ng the mou se. [Fig.7-37 PAN/T[...]

Stand-a lone DVR I nstructio n M anual 94 ▫ Baud rate Click the “BAUD RATE” button in the PAN/TILT window and choose a value among 1200bps, 2400bps, 4800bps, 9600bps, 19200bps, 38400bps, 57600bps and 115200bps on the Baud Rate pop-up window by clicking the mouse. ▫ Data Bi ts Click the “DATA BITS” button in the PAN/TILT window and choos[...]

7. Setu p 95 ▫ Stop Bits Click the “STOP BITS” button in the PAN/TILT window and select 1 or 2 on the Stop Bits pop-up window by clicking the mouse. ▫ Parity Bit Click the “PARITY BITS” button in the PAN/TILT window and choose a value among NONE, ODD, EVEN , STICK a nd ZERO on the Pari ty Bits pop-up window by clickin g the mouse. [Fig.[...]

Stand-a lone DVR I nstructio n M anual 96 7-4.6 Display ▫ Clic k the DISPLAY button in the CAMERA menu and select the ON or OFF. If the “ON” is selected, the camera na me (camera title) in th e LIVE mode will be displayed on the screen. If the “OFF” is selected, th e camera name (camera title) in the LIVE mode won’t be displayed. 7-4.7 [...]

7. Setu p 97 7-5. AUDIO ▫ Click on the AUDIO bu tton in the SETUP menu and then the AUDIO me nu will be displayed on the screen. ▫ Click the UP/DOWN bu tton on the right ha nd side of the menu to sw itch the page. ▫ Click the (EXIT) button to return to th e SETUP men u. [Fig.7-49 AUDIO menu] 7-5.1. Audio Recording ON/OFF ▫ Click the REC (au[...]

Stand-a lone DVR I nstructio n M anual 98 7-6. RECORD ▫ Click the “RECORD” button in the SETUP menu and then the RECORD menu wi ll be displayed as shown in Fig.7-52. ▫ Click the UP/DOWN bu tton on the right ha nd side of the menu to sw itch the page. ▫ Click the (EXIT) button to return to th e SETUP men u. 7-6.1. Record ICON Display ▫ T[...]

7. Setu p 99 7-6.2. All Manual / Timer recording button ▫ Click the All Manual / Timer re cording button in the RECORD menu, then the All Manua l / Timer recording button will be d isplayed as shown in Fig.7-55. ▫ Select t he Ma nual Recording button or Timer Recording button for all the channels by cli cking t he mous e in Fig. 7-55 . ▫ See [...]

Stand-a lone DVR I nstructio n M anual 100 7-6.3. All Motion ON / OFF, Se nsitivity and Velocity Se tting ▫ Click the button in the RECORD menu, then the ALL MOTION setup pop-up window will be displayed as shown in Fig.7-57. ▫ By clicking the mouse, se lect the on the pop-up window (See Fig.7-57) to enable the system to start recording by motio[...]

7. Setu p 101 7-6.4. All Sensors ON / OFF ▫ Click the button in the RECORD menu, th en the ALL SENSOR setup pop-up window will be displayed as shown in Fig.7-60. ▫ By cl icking the mous e, sel ect the on the p op-up window (See Fig.7- 60) to enable the system to start recording by Sensor (Passive Infrared Sensor) for a ll the channel s. ▫ By [...]

Stand-a lone DVR I nstructio n M anual 102 7-6.6. Recording Speed ▫ Click the F/S (Frames Per Seconds: Recording Speed) button on each of the channe ls in the RECORD menu, then the Recording Speed pop-up window will be displayed as shown in Fig. 7-64. ▫ Select one of the Recording Speed among AUTO, 30, 15, 10, 7, 5 , 3, 2, 1 and OFF on the pop-[...]

7. Setu p 103 30 25 15 12 10 8 7.5 6 5 5 3 3 2 2 1 1 NTSC OFF PA L OFF 7-6.7. Recording Quality ▫ Click the QUALITY b utton on ea ch of the channels in the RECORD menu , then the QUALITY pop-up window will be displayed as show n in Fig.7-67. ▫ Select one of the Recording Quality among LOW, NORMAL, HIGH and BEST on the pop- up window by clicking[...]

Stand-a lone DVR I nstructio n M anual 104 7-6.8. Recording Mode The factory default setting for Recording is the Manual Recording (or called Continuous Recording ), which keeps recording continuo usly if the OVERWRIT E is set ON in the DISK MANAGE menu. This Manua l Recording mode is not only one of the most popular Recording modes for users, bu t[...]

7. Setu p 105 7-6.9. Recording by Motion Detection When the menu of motion is properly set up (See section 7-6.3 for all the channels and this section for e ach of the channels) and de tected motion of objec ts, the system begins recording automatically. The recording icon on the MENU bar should be selected in t his recording mode. If not, it won?[...]

Stand-a lone DVR I nstructio n M anual 106 ▫ Pre-Alarm Time Setup Allows y ou to reco rd a se ction o f video ju st pr ior to Mo tion or Sensor activation. Cli ck the mouse on the PRE in the MOTION me nu and choose one of the values among 0 , 1, 2, 3, 4 and 5 seconds with the mouse’s wheel, and then click it to save. ▫ Motio n Hold Time Setup[...]

7. Setu p 107 ▫ Spot Setup If the “ON” is selected by clicking the mouse on the SPOT button in the MOTION menu, a full screen will display when a motion is detected. If the “OFF” is selected, the full screen won’t be displayed even though motion of objects is detected. ▫ Region The Motion Detection Area displays in blue on the screen [...]

Stand-a lone DVR I nstructio n M anual 108 - All Clear Click the ALL CLEAR button in the MOTION me nu in order to clear the Motion Detection Area, and then the w indow turns to white color as shown in Fig.7 -77. Right-click on the current window to return to the MOT ION menu. [Fig.7-76 ALL CLEAR button] [Fig.7 - 77 All Clea red scree n] CURSO R[...]

7. Setu p 109 By Window Se t Click the WINDOW SET button in the MOTION menu on each of the cameras and click one of cells (330 cells in total) for the starting point of the area which you would like to designate, and then click the other one of cells for the ending point of area un til the motion detection area is the size you want it to b e. The m[...]

Stand-a lone DVR I nstructio n M anual 11 0 - Window Clear Click the WINDOW CLEAR button in the MOTION me nu in order to clear the Motion Detection Area, a nd then the w indow you a lre ady created the motion de tection area will be displayed. Click the starting point and the ending point as much as you wish to clear or it can be cleared by ALL CLE[...]

7. Setu p 111 By Each Cell Click the EACH CELL button in the MO TION menu on each of the came ras and click the mouse on each of the cells as much as you would like to designate the Motion Detection Area. To cl ear, c lick th e design ated c ells. Right-click on the current w indow to return to the MOTION me nu. [Fig.7-82 EACH CELL button] [Fig.7-8[...]

Stand-a lone DVR I nstructio n M anual 11 2 ▫ Map View Click the MAP VI EW button in the MOTION menu to view the current settings for Motion detection area. Right-click on the current w indow to return to the MOTION me nu. Note : Pleas e pa y attention to the follow ing directions in order to use the Motion Detection function properly: • Adjust[...]

7. Setu p 11 3 7-6.10. Recording by Sensor (PIR Sensor) ▫ Click t he mouse on the button for each of the channels in the RECORD men u and then the SENSOR men u will be displayed o n the screen as show n in Fig.7-86. ▫ Click the (EXIT) button to return to th e RECORD menu . ▫ ON/OFF The system will start to record when Alarm is d etected and t[...]

Stand-a lone DVR I nstructio n M anual 11 4 ▫ Pre-Alarm Time Setup Allows you to record a section of video just prior to Sensor activation. Click the mo use on the PRE in the SENSOR menu and choose one of the values among 0, 1, 2, 3, 4 a nd 5 seconds with the mouse’s wheel, and then click it to save. [Fig.7-88 Pre-Alarm T ime Setup button] [Fig[...]

7. Setu p 11 5 ▫ Alarm Hold Time Setup The system continues recording for the Alarm HOLD TIME and finishes the recording. Click the mouse on the HOLD in the SENSOR menu and choose one of the values among 1 through 30 secon ds with the mouse’s w heel, and then click it to save . ▫ Spot Setup If the “ON” is se lected by clicking the mouse o[...]

Stand-a lone DVR I nstructio n M anual 11 6 7-7. NETWORK ▫ Click t he “NETWORK” button in the SETUP menu and then the NETWORK menu will be displayed on the screen as shown in Fig.7-92. ▫ Click t he (EXIT) button to return to the SETUP menu . 7-7.1. IP Mode When the system uses the same IP addre ss every time it connects to the network, it i[...]

7. Setu p 11 7 7-7.2. GATEWAY, S UBNE T, IP ADDRESS ▫ Click the G ATEWAY / SUBNET / IP ADDRESS button in the STATIC IP MODE and then the On Screen Keyboard will appear. ▫ Delete th e current valu es with the butto n and en ter th e addr ess nu mbers by usi ng On Screen Keyboard, and then click OK button to set with new addr ess. ▫ Click the C[...]

Stand-a lone DVR I nstructio n M anual 11 8 7-7.3. Port ▫ PORT is the TCP address of the program, which is used to connect to the network viewer. It can be set from 1 to 65535 values. ▫ Click the PO RT button an d then the On Screen Keyboard will show up . ▫ Delete the cu rrent port number w ith the button and enter the new port number by usi[...]

7. Setu p 11 9 7-7.4. MAC ID ▫ MAC ID is connecting address for Ethernet, ever y unit has 12 digit address (HEX 6 byte). MAC ID was already assigned with the factory default value. User can not change it. 7-7.5. MNS (MAC NAME SERVER) As a sort of DDNS, two servers in our company (CLOVER) are being operated so that our client can access DVR with a[...]

Stand-a lone DVR I nstructio n M anual 120 ▫ IP ADDRESS / P ORT DO NOT CHANGE THE IP ADDRESS AND PORT NUMBER IN THE MNS MENU IF YOU DON’T HAVE ANY SPECIAL SERVER TO ACCESS YOUR DVR WITH A DYNAMIC IP ADDRESS. IF Y OU CHANGE THEM, Y OU CAN’T NOT ONLY USE OUR MNS (MAC NAME SERVER), BUT ALSO YOUR NETWORKING WILL BE DISCONNECTED. ▫ SITE NAME The[...]

7. Setu p 121 7-7.6. DDNS (DYNAMIC DOMAIN NAME SYSTEM) ▫ Select t he DDNS button in the NETWORK menu by clicking the mouse, pressing the buttons on the front panel or remote cont roller. The DDNS menu will show up as shown in Fig.7-103. ▫ To return to the NETWORK menu, Click the (EXIT) button. ▫ If y ou were i n the m iddle of ente ring v alu[...]

Stand-a lone DVR I nstructio n M anual 122 ▫ HOST NAME - Clic k the HOST NAME in the DDNS menu and type the HOST NAME registered to the DDNS server such as DYNDNS.ORG and NO-IP .ORG by using the On Screen Keyboard. - After changing the values, click o n the OK button. ▫ USER ID - Click the USER ID in the DDNS menu and type the USER ID registere[...]

7. Setu p 123 7-7.7. HOW TO SETUP AND USE THE DDNS 7-7.7.1. Router. It has to be set as a virtual server (or port forw arding) in order to utilize the DDNS. There are a lot of manufacturers on the market. Please read the pro vided manual thoroughly before setting or visit our website at www .c loverusa.com in regard s to do it. We, the manufacturer[...]

Stand-a lone DVR I nstructio n M anual 124 7-7.8. EMAIL NOTIFICATIO N ▫ Email notification enable s to notify even ts (sensor, motio n, video loss, p ower on/off, pow er loss, record on/off, record fail, replay or copy start/stop) by sending emails to one or two email accoun ts. [Fig.7-108 Email Notification wind ow][...]

7. Setu p 125 ▫ EMAIL ADDRESS SETUP [Fig.7-109 Email Address setup] - Click one of email address boxes a nd then the On Screen Keyboard will show up a s shown Fig.7-109. - Delete the curre nt email address w ith the button and enter an email address by using the On Screen Keyboard. - If necessary, cli ck the button to enter up per cases. - Click [...]

Stand-a lone DVR I nstructio n M anual 126 ▫ EVENT Setu p - Click the check boxes below to choose the events you need. - To delete, click the check box again. [Fig.7 -111 E vent setup] ▫ INTERVAL TIME Setup - Click the INTERVAL TIME (see Fig.7-112) to set the interval time o f sending ema ils and then choose the time (in minutes) on the pop-up [...]

7. Setu p 127 Note : If the motion is selected in Fig.7-1 12, you may receive numerous emails from the DVR systems due to a couple of factors such as continuous moving objects, a strong and changing lighting source, low resolution and noises of cameras. In case of th is, select a longer INTER V AL TIME and refer to “Note for Motion Detection Func[...]

Stand-a lone DVR I nstructio n M anual 128 7-8.1. VIDEO ENHANCEMENT ON EACH CAMERA ▫ Click on an INPU T button in the VIDEO ENHANCE menu. ▫ The CONTRAST and BRIGHTNESS s liders will be displayed along w ith camera picture as shown in Fig.7-114. ▫ Adjust Contrast and Brightness with the sliders by clicking the mouse. ▫ To retu rn to the VIDE[...]

7. Setu p 129 7 -8.2. VIDEO ENHANCEMENT ON VGA OUTPUT ▫ Click on the VGA OUTPUT in the VIDEO ENHANCE menu. ▫ The CONTRAST, BRIGHTNESS and SATURATION sliders w ill be displayed along w ith camera p icture. ▫ Adjust Contrast, Brightness and saturation with the sliders by clicking the mouse. ▫ To retu rn to the VIDEO ENHANCE menu, Click the (E[...]

Stand-a lone DVR I nstructio n M anual 130[...]

131 131 8. Remote Host Program 8[...]

Stand-a lone DVR I nstructio n M anual 132 CONTENTS 8-1. R EMOT E P ROGRAM O VERVIEW ........................... ............................ ........................... ........ 133 8-2. I NST ALLING THE P ROGRAM TO PC ............................ ........................... ........................... .... 134 8-3. I NTERNET E XPLORER ...........[...]

8. Remote Host Pr ogram 133 8-1. Remote Program Overvi ew The Remote Host Program allow s you to view live video, search archived video, control PTZ camer as and t o set up the exac t same m enus as the DVR does. The DVR system can have up to 10 simultaneous Remote Connections. Each user can performs on the DVR system and will not affe ct the othe [...]

Stand-a lone DVR I nstructio n M anual 134 8-2. Installing the Program to PC Install the program into PC by using program CD (supplied) as f ollow s. How to install the pro gram 1. Start the operating system (Window s 2000/XP/VISTA). 2. Insert the program CD into CD-ROM drive. 3. Open My Computer , an d then select CD-ROM drive. 4. Double click Set[...]

8. Remote Host Pr ogram 135 8-3. Internet Explorer When you are trying to use this function, it is high ly recommended that the passw ord should be turned ON in the SYSTEM menu not to enable unauthorized personnel to access your DVR system (See section 7-2.3). Up to 10 users can remo tely access yo ur DVR with the H OST N AME. How to setup t he Int[...]

Stand-a lone DVR I nstructio n M anual 136 • Click on the following message . This site wants to inst all the following add-on: ‘DVR Master’ from ‘Clover Electron ics USA ’ . If you trust the we bsite and the add-on and want to insta ll it, click here…. • Click on the click inst all ActiveX Control …. on t he pop- up scr een and t h[...]

8. Remote Host Pr ogram 137 8-4. Remote Host [Fig 8-5. DVR Mast er] ○ 12 ⑧⑨⑩ ○ 16 ○ 13 ○ 14 ○ 15 ④ ⑥ ⑤ ⑦ ① ② ③ ⑪[...]

Stand-a lone DVR I nstructio n M anual 138 Table. Desc rip t ion of Rem ote Host Progr am But ton ① Minimization Button ② Close But ton ③ Current Time ④ Connection But ton ⑤ Setup Button ⑥ Player Executio n Button ⑦ Captur e Button ⑧ Multi- Mode ⑨ Termi nal Mode ⑩ E-map Butt on ⑪ Splits the screen in 4, 9 & 16ch. ○ 12 PA[...]

8. Remote Host Pr ogram 139 8-4.1. Setup ① Version n umber It represents the current version number of the Firmw are. ② Copy Refer to Section 8-4.10 in regards to copying methods after selecting one between the Quick Copy a nd the Live + Co py. ▫ Quick Copy Click on the Quick Copy for faster copying the recorded data from the DVR to the Host [...]

Stand-a lone DVR I nstructio n M anual 140 ③ Network Image ▫ Size Choose a Size (Resolution) among D1, Half D1 and CIF you w ish to display on the DVR Master by clickin g the mouse. Th is setting does not affect the DVR . ▫ Quality Choose one among LOW, NORMAL, HIGH and BEST you wish to display on the DVR Master by clickin g the mouse. Th is [...]

8. Remote Host Pr ogram 141 8-4.2. Connection There are two ways to access the DVR through the DVR Master as follow s. ▫ With Set Direct setting - Clic k the “CONNE CT” but ton on the DV R Mast er and then t he “Con nect Dialog menu” a s shown in Fig. 8-8 will be displayed. - Click the “Set Direct” in the Connect Dialog menu and click[...]

Stand-a lone DVR I nstructio n M anual 142 [Fig.8 -8 Connect Dialog] 8-4.3. Capture The current images on the screen will be captured a nd saved in the Printed Files (Open Windows Explorer – click My Computer – clic k Program Files – click DvrMaster – click Printed Files). To play captured images, double-click on e of JPEG Images in the Pri[...]

8. Remote Host Pr ogram 143 8-4.4. Status If the Status button on the DvrMaster is selected by clicking the mouse, the DvrMaster displays the DVR’s status related to connections of cameras, s ensors, relay outputs and remaining HDD (Hard Disk Drive) capacity available for re cording. [Fig.9-9 ST A TUS MODE] Status button[...]

Stand-a lone DVR I nstructio n M anual 144 8-4.5. Replay It is possible to replay the recorded data from the DVR system by using the Replay button in Fig.8-10 in the Multi mode only (refer to section 8-4.9.2). - Clic k the Replay bu tton as shown in Fig.8-10 to playback the recorded dat a from the DVR system, and then the Replay T ime Setup Wind ow[...]

8. Remote Host Pr ogram 145 ▫ Play back C ontro l Playba ck control b uttons : Button for fast rewinding up to 128 times by repea tedly pressing. : Button for viewing previous frame in still image. : Play button. : Button for viewing the next frame in still image. : Button for fast forwarding up to 128 times by repeatedly pressing. : It sto ps re[...]

Stand-a lone DVR I nstructio n M anual 146 8-4.6. COPY It is possible to copy the recorded data fro m the DVR system to a client PC by using the Copy button in Fig.8-13 in the Multi mode only (refer to section 8-4 .9.2). - Click the Copy button as shown in Fig.8-13 to copy the recorded data from the DVR system to a PC, and th en the Copy Time Setup[...]

8. Remote Host Pr ogram 147 “ALL” in yello w represent s that all the came ras are selected. The camera channel number(s ) in yellow represents tha t the corresponding channel(s) are selected . - Click the Copy ( ) button and then the cop ying progressive bar a s shown Fig.8-15 will show up. - While copying, click the S top button in the Copy T[...]

Stand-a lone DVR I nstructio n M anual 148 8-4.7. Switch the Normal Screen to Full Screen ▫ Click the “FULL SCREEN” button on the DvrMaster as shown Fig.8-16 a nd then th e current screen size will be enlarged to fit the mon itor’s screen size, but the r esolution will be low ered. ▫ Click the “FULL SCREEN” b utton again to go back to[...]

8. Remote Host Pr ogram 149 8-4.8. Speaker / Microphone Buttons of Remote Host Program ① Audio Input channel selection: Select the same audio channel as the DVR has. ② PC Speaker ON/OFF: Turn the Speaker ON or OFF by clicking the mouse. ③ PC Microphone ON/OFF: Turn the Microphone ON or OFF by clicking the mouse. ④ PC Speaker Volume Control:[...]

Stand-a lone DVR I nstructio n M anual 150 8-4.9. Connection mode There are two kinds of connection mode (See Fig.8-19) on the DvrMaster . Select one of them by cl icki ng the mo use dep endin g on you r appli catio n. 8-4.9.1. Terminal mode The f unction s of ic ons suc h as Rec ordin g, Play , Copy , Set up, S ystem S tatus, Pan/Tilt, Dis play , [...]

8. Remote Host Pr ogram 151 8-4.9.2. Multi mode It is impossib le to contro l (Recording on/o ff, Se tup, System Statu s, Display and OSD) the DVR system in the Multi mode except Replaying and Copying (See section 8-4.5, 8-4.6 on page 144-146), but th e image o f channel 16 w ill always display on the monitor and the DvrMaster. - Click the Multi mo[...]

Stand-a lone DVR I nstructio n M anual 152 8-4.10. Copy in the Terminal mode There are four icons such as NETWORK, USB, CD and DVD in the COPY menu of the Multi mode. The recorded data will be saved in the Backup Files (Open Windows Explorer – click My Computer - click the Program Files – click DvrMaster – click Backup Files) through the NETW[...]

8. Remote Host Pr ogram 153 [Fig.8-22 Copying in the T erminal mode] [Fig.8-23 Copy Completion ][...]

Stand-a lone DVR I nstructio n M anual 154 8-4.11 E-Map E-Ma p enabl es us ers to d isplay the ca meras on the di gital ma p for bet ter m onito ring. The digital map should be a BMP file and you can make it (the higher resolution the better) or use the E-map samples saved in the E-ma p folder (See Fig.8-26). 8-4.10.1. Addition of ma p - Click the [...]

8. Remote Host Pr ogram 155 - To rename, right-click a saved eMap list and click “Rename” on the pop-up window as shown in Fi g.8- 27 . - To delete, right-click a saved eMap list and click “Delete eMap” on the pop-up window as shown in Fig.8-28 . - To display, double-click one of saved eMap lists. The ima ge size of each channe l will be mi[...]

Stand-a lone DVR I nstructio n M anual 156 8-4.10.3. Usage of camera position The small squares with channel numbers on the map indicate the camera position. The blue screen represents that the corresponding camera is not connected to the DVR system. - Doub le-c lick the im age t o display a full s creen. - To change the camera position, click the [...]

8. Remote Host Pr ogram 157 8-4.12 Pan / Tilt & Preset Y ou can con trol the PTZ came ra throug h DvrMaster . This fe ature is basicall y identical to what the DVR system has. Refer to section 6-7.7 P AN/TIL T on p age 46 . [Fig.8-32 P AN / TIL T] PRESET / RUN FOCUS ZOOM PA N / T I LT CHANNEL SELECT[...]

Stand-a lone DVR I nstructio n M anual 158 8-5. PLAYER [Fig.8 -32 Player] Char t. Butto n of P l ayer P r ogram ① Status w indow ( Play mode, D ate, Time) ② Calendar ③ Convert to AVI File ④ Search button for replaying ⑤ Capt ure bu tton ⑥ Prin t bu tton ⑦ Division bu tton ⑧ Playback (Replay) speed Control ⑨ Search slider for repla[...]

8. Remote Host Pr ogram 159 ① Status w indow ( Play mode, Da te, Time) It indicates th e play mode , date and time. ② Calendar It shows the date currently being rep layed. [Fig.8-34 Calendar] ③ Convert AVI File Convert the recorde d files to AVI files. - Clic k the Con vert AVI butt on on th e Play er and the Conv ert AVI windo w will be disp[...]

Stand-a lone DVR I nstructio n M anual 160 [Fig.8 -35 Convert AVI window] [Fig.8-36 Backup F iles by Networking] [Fig.8-37 DvrRecD ata by USB][...]

8. Remote Host Pr ogram 161 [Fig.8 -38 Select one of the Channels] [Fig.8-39 St art Convert Button] How to play the A V I f iles By using Windows media player: - Click the OPEN button on the Convert AVI w indow and double click one of the AVI files to play. The AVI files will save in the AVI Files folder (Ope n Windows Explorer – click My Compute[...]

Stand-a lone DVR I nstructio n M anual 162 ④ Search button for Replaying - Click the Search button on the Play er and the Browse for Folder will be disp layed. - Select the folder that contains the recorded data and click the OK bu tton on the Browser for Folder. One channel or all the channels can be replayed depending on the selectio n. ⑤ Cap[...]

8. Remote Host Pr ogram 163 ⑦ Division button Select one of the following divisions while repl aying. ⑧ Playb ack (Replay) Speed Control Move the slider with the mouse to control the replaying speed. The “0” represents the normal speed, “-“and “+” represents slow speed and fast speed respectively. [Fig.8-40 Print command windo w] Fu[...]

Stand-a lone DVR I nstructio n M anual 164 ⑨ Search slider for replaying The slider can be move d left and right by clicking the slider on the bar and d ragging it or just click the bar to search the recorded data. ⑩ Replay Control Refer to se ction 6-9 .2.3. ⑪ Volume Control. Cont rol th e volum e when r eplayi ng on th e full screen mode ?[...]

165 9. Installation of additional HDDs CONTENTS 9-1. HDD (H ARD D ISK D RI VE ) INST ALLA TION ............... ...................... ............................ ........ 166 9-2. I NST ALLA TION OF AN ADDITIONAL HD D ...................... ........................... ....................... ........ 167 9[...]

Stand-a lone DVR I nstructio n M anual 166 9-1. HDD (Hard Di sk Driv e) INS T AL L AT ION ▶ Thr ee of internal Hard Disk Drives (HDD) and a CD R/W or DVD R/W can be installed in the system. DVR manufacturer already installed a 50 0GB of Hard Disk Drive (IDE) and a DVD R/W. To install additional hard disk drives, refer to the following pages. Note[...]

9. Installation of additional HDD s 167 9-2. Ins tal l ati on o f an ad dition al HDD ▶ Set the jumper setting to “Ca ble Select” po sition on the additional HDD. Note : Be sure that the jumper setting is corre ct. If not, the sy stem will not recognize the additiona l HDD. ▶ Turn off the power. Unscrew and remove the cover. ▶ Install the[...]

Stand-a lone DVR I nstructio n M anual 168[...]

169 APPENDIX CONTENTS R ECORDING TIME TAB LE ............ ........................... ....................... ........................... ................... 170 F ACTORY DEF AUL T SETTINGS .................. ....................... ............................ ........................... .....171[...]

Stand-a lone DVR I nstructio n M anual 170 Recording time table HDD: 500GB, Based on 16 cameras R e c o r d i n g R e s o l u t i o n : C I F ( 3 2 0 X 2 4 0 ) D A Y S 30 fps 15 fp s 10 fps 7.5 fps 5 fps 3 fps 2 fps 1 fps (480fps) (240fps) (160fps) (120fps) (80fps ) (48f ps) (32fps) (16fps) Each CH (16CH/fps) BEST 12.14 24.28 36.42 48.56 72.84 121.[...]

171 Factory default settings (1) LIVE SCREEN 16 SPLIT OSD ON (2) TIME / DATE DISPLA Y : ON TIME F ORMA T : 24 HOUR DA TE FORMA T : MM/DD/ YYYY (3) LOAD / BACKUP CON FIG NONE LISTS (4) USER ACCOUNT PASSWORD: SET YOUR P ASSWORD (THE PASSWORD IS NULL) PASSWORD ON/OFF: OFF (5) IR REMOTE ID OFF (6) HDD OVERWRITE ON (7) CAMERA ACTIVE: ALL ON NAME: CAM XX[...]

Stand-a lone DVR I nstructio n M anual 172 (8) AUDIO (9) RECORD RECORD ICON DISPLA Y : ON SIZE: ALL HALF D1 (704 X 240) FPS: ALL 15 f ps QUALITY : ALL HIGH MODE: ALL MANUAL RECORD MODES SENSITIVITY : HIGH - TIMER RECORD ACTIVE: ALL OFF TIMER: ALL 00: 00 – 24: 00 - MOTION DETECT : OFF PRE: 1 sec. HOLD: 10 sec. SPOT : OFF REGION: ALL SET - SENSOR D[...]

173 (10) NETWORK TYPE: DYNAMIC PORT : 5800 MNS: DISABLE SERVER 1 MODE: DISABLE SERVER 1 IP ADDRESS: 65.60.84.15 SERVER 1 PORT : 300 SERVER 2 MODE: DISABLE SERVER 2 IP ADDRESS: 221.149.149.1 17 SERVER 2 POR T : 300 SERVER SITE NAME: SXXX XXX (MAC AD DRESS) DDNS: DISABLE SERVER: DISABLE EMAIL: DISABLE EMAIL ADDRESS: ALL UNDEFINED EVENT : ALL DESELECT[...]

Stand-a lone DVR I nstructio n M anual 174[...]

175 FAQ CONTENTS I CAN NOT LOGIN ......... ....................... ........................... ............................ ........................... .....176[...]

Stand-a lone DVR I nstructio n M anual 176 I can not login ▶ Plea se check if the link LED of DVR a nd LAN port of PC are lit. ▶ Plea se check if the IP address on DVR and the PC is identical. Check SYSTEM STATUS by pressing STATUS button of DVR MY IP: xxx.xxx.xxx.xxx Chec k Target IP Addr ess by clicki ng CONF button of PC host progr am. TARGE[...]

177 Limited 2Year Warranty This warranty gives the original purchaser specific legal rights and you may also have other rights, which may vary from state to state. If our products do not function because of any defect in material or workmanship, we will repair it for free for 2 year on parts and labor from the date of original purchase. This warran[...]

Stand-a lone DVR I nstructio n M anual 178 How to obtain Factory Service • O riginal purchaser must fill out the warranty card and mail it to the factory with th e model number , serial number and the date of purchase. • We will repair or replace, and return the system to the owne r under this limited warranty. • P lease p ack the system ca r[...]