Datalogic MAGELLAN 1000I manual
- Consulta online o descarga el manual de instrucciones
- 160 páginas
- 0.89 mb
Ir a la página of
manuales de instrucciones parecidos
-
Scanner
Datalogic DS8100A
97 páginas 6.01 mb -
Scanner
Datalogic MAGELLAN 1400I
180 páginas 0.94 mb -
Scanner
Datalogic DS6400
122 páginas 8.02 mb -
Scanner
Datalogic DS6500
36 páginas 4.03 mb -
Scanner
Datalogic DS2200
41 páginas 1.77 mb -
Scanner
Datalogic DS1100
8 páginas 0.98 mb -
Scanner
Datalogic C-BOX 200
28 páginas 3.07 mb -
Scanner
Datalogic C-BOX 300
38 páginas 6 mb
Buen manual de instrucciones
Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Datalogic MAGELLAN 1000I. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Datalogic MAGELLAN 1000I o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.
¿Qué es un manual de instrucciones?
El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Datalogic MAGELLAN 1000I se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.
Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Datalogic MAGELLAN 1000I, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.
Entonces, ¿qué debe contener el manual de instrucciones perfecto?
Sobre todo, un manual de instrucciones Datalogic MAGELLAN 1000I debe contener:
- información acerca de las especificaciones técnicas del dispositivo Datalogic MAGELLAN 1000I
- nombre de fabricante y año de fabricación del dispositivo Datalogic MAGELLAN 1000I
- condiciones de uso, configuración y mantenimiento del dispositivo Datalogic MAGELLAN 1000I
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas
¿Por qué no leemos los manuales de instrucciones?
Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Datalogic MAGELLAN 1000I no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Datalogic MAGELLAN 1000I y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Datalogic en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Datalogic MAGELLAN 1000I, como se suele hacer teniendo una versión en papel.
¿Por qué vale la pena leer los manuales de instrucciones?
Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Datalogic MAGELLAN 1000I, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.
Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Datalogic MAGELLAN 1000I. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.
Índice de manuales de instrucciones
-
Página 1
Magellan ® 1000i Omni-Directional Imaging Scanner Product Reference Guide[...]
-
Página 2
Datalogic Scanning, Inc. 959 T err y Street Eugene, Oregon 97402 T elephone: (541) 683-5700 F ax: (541) 345-7140 An Unpublished W ork - All r ights reser v ed. No par t of the contents of this documentation or the procedures described therein may be reproduced or transmitted in an y form or by any means without prior written per mission of Datalogi[...]
-
Página 3
Product Reference Guide i- i Table of Contents About This Manual ............................................................................................................. .. 1-1 Manual Conventions ....................................................................................................... 1-1 Connecting the Scanner ..................[...]
-
Página 4
i-ii Magellan ® 1000i Bar/Space Polarity .................................................................................... 3-27 Wand Idle State ........................................................................................ 3-27 Signal Speed ............................................................................................ 3-[...]
-
Página 5
Product Reference Guide i-iii Code 39 Full ASCII ....................................................................................................... 5-25 Length Control ............................................................................................................. 5-2 6 Code 39 Length 1, Length 2 Programming Instructions .........[...]
-
Página 6
i-iv Magellan ® 1000i Minimum Reads ........................................................................................................... 5-63 Optical and Read Performance Parameters .............................................................................. A-1 Scanner Dimensions ..........................................................[...]
-
Página 7
Product Reference Guide 1-1 Chapter 1 Getting Started The Magellan ® 1000i Omni-D irectional Imaging Scanner offers hands-free scanning for small, easily handled items and handheld scanning for bulkier items. I ts aggressive imaging perfor- mance and intuitive operation reduces user training and speeds checkout for better customer service. About T[...]
-
Página 8
Getting Started 1-2 Magellan ® 1000i Connecting the Scanner The scanner kit you order ed to match your interface should provide a compatible cable for your installation. U se the appropriate instructions below to connect the scanner to the terminal, PC or other host device. U pon completing the connection via the appropriate inter face instruction[...]
-
Página 9
Programming Product Reference Guide 1-3 Wand Emulation Connection — Connect the scanner to the appropriated port on the ter- minal/PC using the correct cable for the interface type you or dered. Reference Figure 2 . IBM Connection — Connect the scanner to the IBM port on the terminal/PC using the cor- rect IBM cable. Refer ence Figure 2 . Keybo[...]
-
Página 10
Getting Started 1-4 Magellan ® 1000i LED and Beeper Indicators The scanner ’ s beeper sounds and its green LED illuminates to indicate various functions or errors on the scanner . The tables below list these indications. One ex ception to the behaviors listed in the tables is that the scanner’ s functions are programmable, and may or may not b[...]
-
Página 11
Error Codes Product Reference Guide 1-5 Error Codes U pon star tup, if the scanner flashes its indicator LED or sounds an unexpected series of beep tones (other than normal power-up indications), this means the scanner has not passed its auto- matic Selftest and has enter ed FRU 1 isolation mode. If the scanner is reset or the trigger is pulled, th[...]
-
Página 12
Getting Started 1-6 Magellan ® 1000i NOTES[...]
-
Página 13
Product Reference Guide 2-1 Chapter 2 General Features Double Read Timeout The Double R ead Timeout featur e sets a time limit that determines how much time must pass before reading the same label again (e.g. two identical items in succession). ST ART / END PROGRAMMING BARCODES 0.1 Second 0.2 Second 0.3 Second 0.4 Second DEF AUL T 0.5 Second 0.6 Se[...]
-
Página 14
General Features 2-2 Magellan ® 1000i Double Read Timeout — cont. ST ART / END PROGRAMMING BARCODES 0.7 Second 0.8 Second 0.9 Second 1 Second[...]
-
Página 15
Label Gone Timeout Product Reference Guide 2-3 Label Gone Timeout This feature sets the time after the last label segment is seen before the scanner pr epares for a new label. Productivity Index Reporting (PIR) When PIR is enabled, label quality data is appended to decoded data befor e being presented to the POS. The PIR featur e allows the scanner[...]
-
Página 16
General Features 2-4 Magellan ® 1000i Sleep Mode This feature specifies the amount of time with no bar code reads bef ore the scanner enters sleep mode. ST ART / END PROGRAMMING BARCODES 15 Seconds 30 Seconds 1 Minute 2 Minutes 3 Minutes 4 Minutes 5 Minutes[...]
-
Página 17
Sleep Mode Product Reference Guide 2-5 Sleep Mode — cont. ST ART / END PROGRAMMING BARCODES 6 Minutes 7 Minutes 8 Minutes 9 Minutes 10 Minutes DEF AUL T 12 Minutes 15 Minutes 30 Minutes 1 Hour[...]
-
Página 18
General Features 2-6 Magellan ® 1000i LED and Beeper Indicators Power On Alert Disables or enables the indication (a single beep) that the scanner has finished all its po wer up tests and is now ready for operation. ST ART / END PROGRAMMING BARCODES Disable Enable DEF AUL T[...]
-
Página 19
LED and Beeper Indicators Product Reference Guide 2-7 Good Read: When to Indicate This feature specifies when the scanner will pro vide indication (beep and/or flash its green LED) upon successfully reading a bar code. Choices are: • Good Read = I ndicate after decode • Good Read = I ndicate after transmit • Good Read = I ndicate after CTS go[...]
-
Página 20
General Features 2-8 Magellan ® 1000i Good Read Beep Control This feature enables/disables the scanner ’ s ability to beep upon a successful decode of a bar code. Good Read Beep Frequency Adjusts the good read beep to sound at a selectable lo w , medium or high frequency , selectable from the list below . (Controls the beeper ’ s pitch/tone.) [...]
-
Página 21
LED and Beeper Indicators Product Reference Guide 2-9 Good Read Beep Length S pecifies the duration of a good read beep. ST ART / END PROGRAMMING BARCODES 60msec 80msec DEF AUL T 100msec 120msec 140msec 160msec 180msec 200msec[...]
-
Página 22
General Features 2-10 Magellan ® 1000i Good Read Beep Volume Selects the beeper volume (loudness) upon a good read beep . There are thr ee selectable volume levels. ST ART / END PROGRAMMING BARCODES Low Medium High DEF AUL T[...]
-
Página 23
Scanning Features Product Reference Guide 2-11 Scanning Features Targeted Scanning Mode U pon pressing the button, the scanner will project an aiming pattern to assist in centering over the bar code. Scanning then takes place as soon as the button is released. Configuration options for T argeted Scanning M ode are: •T a r g e t M o d e A c t i v [...]
-
Página 24
General Features 2-12 Magellan ® 1000i Target Mode Linger Time S pecifies the time duration the scanner remains in the targeted mode of operation after reading a ba r cod e be fore re vert ing to Om ni-d irec tion al Mode. ST ART / END PROGRAMMING BARCODES Shor t Duration Medium Duration DEF AUL T Long Duration[...]
-
Página 25
Scanning Features Product Reference Guide 2-13 Wake Up Intensity This feature indicates the percentage of ambient light change which will trigger the scanner to wake up from Sleep M ode. Lower settings pro vide greater sensitivity . The seelectable range for this setting is 5% to 15%. ST ART / END PROGRAMMING BARCODES 5% 6% 7% 8% 9% 10% DEF AUL T 1[...]
-
Página 26
General Features 2-14 Magellan ® 1000i Wake Up Intensity — cont. ST ART / END PROGRAMMING BARCODES 13% 14% 15%[...]
-
Página 27
Product Reference Guide 3-1 Chapter 3 Interface Related Features At the time of this writing, the Scanner supports the interfaces listed in Ta b l e 3 - 1 . Select the desired interface type from the table, then refer ence the page number given for the customizable features section associated with each interface. See Ta b l e 3 - 2 for a descriptio[...]
-
Página 28
Interface Related Features 3-2 Magellan ® 1000i Table 3-2. Keyboard Wedge Interface Reference I/F T ype PCs Supported A PC/XT w/Alter nate Ke y Encoding B A T , PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/Alter nate K ey Encoding C PS/2 25 and 30 w/Alternate Ke y Encoding D PC/XT w/Standard K ey Encoding E A T , PS/2 25-286, 30-286, 50[...]
-
Página 29
Interface Selection Product Reference Guide 3-3 Interface Selection ST ART / END PROGRAMMING BARCODES RS-232 Standard RS-232 Wincor-Nixdorf IBM 4683 P or t 5B IBM 4683 P or t 9B IBM 4683 P or t 17 IBM USB USB K eyboard W and Emulation K eyboard Wedge A[...]
-
Página 30
Interface Related Features 3-4 Magellan ® 1000i Interface Selection — cont. ST ART / END PROGRAMMING BARCODES K eyboard Wedge B K eyboard Wedge C K eyboard W edge D K eyboard Wedge E K eyboard Wedge F K eyboard W edge G K eyboard W edge H K eyboard Wedge I K eyboard Wedge J ³ 000132[...]
-
Página 31
Interface Selection Product Reference Guide 3-5 Interface Selection — cont. ST ART / END PROGRAMMING BARCODES K eyboard Wedge K K eyboard Wedge L K eyboard Wedge M K eyboard We dge N K eyboard We dge O K eyboard Wedge P K eyboard We dge Q K eyboard We dge R K eyboard Wedge S ³ 00013 B[...]
-
Página 32
Interface Related Features 3-6 Magellan ® 1000i Interface Selection — cont. ST ART / END PROGRAMMING BARCODES K eyboard Wedge T K eyboard W edge U K eyboard Wedge V K eyboard Wedge W K eyboard Wedge X K eyboard Wedge Y[...]
-
Página 33
Interface Features Product Reference Guide 3-7 Interface Features Obey/Ignore Host Commands When set to ignore host commands, the scanner will ignore all host commands ex cept for the minimum set necessary to keep the inter face active and transmit labels F or normal operation of the interface, select Obey Host Commands. ST ART / END PROGRAMMING BA[...]
-
Página 34
Interface Related Features 3-8 Magellan ® 1000i Interface Features — cont. Host Transmission Buffers S pecifies the number of host transmission(s) that may be buffered. By buffering data from a bar code, the scanner can continue to read a new bar code while the old one is being transmitted to the host. Selecting BUFFERS = 1 means that the first [...]
-
Página 35
Interface Features Product Reference Guide 3-9 RS-232 Interface Features ST ART / END PROGRAMMING BARCODES 1200 Baud 2400 Baud 4800 Baud 9600 Baud DEF AUL T 19200 Baud 38400 Baud 57600 Baud 115200 Baud[...]
-
Página 36
Interface Related Features 3-10 Magellan ® 1000i RS-232 Interface Features — cont. ST ART / END PROGRAMMING BARCODES 7 Data Bits 8 Data Bits DEF AUL T 1 Stop Bit DEF AUL T 2 Stop Bits Parity = None DEF AUL T P ar ity = Even P ar ity = Odd[...]
-
Página 37
Interface Features Product Reference Guide 3-11 RS-232 Interface Features — cont. Hardware Flow Control Disable Hardware Control— The scanner transmits to the host regar dless of any activity on the CTS line. Enable CTS Flow Control— The CTS signal controls transmission of data to the host. Enable CTS Scan Control— The CTS line must be acti[...]
-
Página 38
Interface Related Features 3-12 Magellan ® 1000i RS-232 Interface Features — cont. Intercharacter Delay This delay is inserted after each data character transmitted. If the transmission speed is too high, the system may not be able to receive all characters. Y ou may need to adjust the delay to make the system work properly . ST ART / END PROGRA[...]
-
Página 39
Interface Features Product Reference Guide 3-13 Intercharacter Delay — cont. Software Flow Control Disables/Enables softwar e control using XON/X OFF characters. ST ART / END PROGRAMMING BARCODES Interchar Delay = 80 msec Interchar Dela y = 90 msec ST ART / END PROGRAMMING BARCODES Disable Software Flow Contr ol DEF AUL T Enable Softw are Flow Co[...]
-
Página 40
Interface Related Features 3-14 Magellan ® 1000i RS-232 Interface Features — cont. Host Echo When enabled, this feature passes all data through the scanner to the host as it comes in. This feature is used for applications where “ daisy chaining” of RS-232 devices onto the same cable is necessary . If, for example, one of the devices in the c[...]
-
Página 41
Interface Features Product Reference Guide 3-15 RS-232 Interface Features — cont. Host Echo Quiet Interval This setting specifies the time interval of RS-232 channel inactivity which must transpire before the scanner will break the host echo loop to transmit the bar code data that has just been scanned to the host. ST ART / END PROGRAMMING BARCOD[...]
-
Página 42
Interface Related Features 3-16 Magellan ® 1000i Host Echo Quiet Interval — cont. Signal Voltage: Normal/TTL S pecifies whether the RS-232 inter face provides TTL levels on the output pins TxD and R TS. ST ART / END PROGRAMMING BARCODES Host Echo Quiet Interval = 80msec Host Echo Quiet Inter val = 90msec Host Echo Quiet Interval = 100msec ST ART[...]
-
Página 43
Interface Features Product Reference Guide 3-17 RS-232 Invert Enables/disables inversion of RS-232 TXD and RXD signals. Beep on ASCII BEL Enables/disables ability of scanner to beep (sound a good read tone) on r eceiving an ASCII BEL (07 hex). ST ART / END PROGRAMMING BARCODES Disable RS-232 In vert DEF AUL T Enable RS-232 In ver t ST ART / END PRO[...]
-
Página 44
Interface Related Features 3-18 Magellan ® 1000i Beep on Not on File Select for the host to beep (or not) when a not-on-file (host command) condition is detected by the host. ST ART / END PROGRAMMING BARCODES Disable Beep on Not On File Enable Beep on Not On File DEF AUL T[...]
-
Página 45
Interface Features Product Reference Guide 3-19 ACK NAK Options This enables/disables the ability of the scanner to support the RS-232 ACK/NAK protocol. When configured, the scanner and/or host sends an “ ACK” when it receives data pr operly , and sends “NAK” when the data is in error . Selections for this option are: •D i s a b l e • E[...]
-
Página 46
Interface Related Features 3-20 Magellan ® 1000i RS-232 Interface Features — cont. — cont. ACK Character NAK Character ST ART / END PROGRAMMING BARCODES Sets the ACK char acter from the set of ASCII characters or any decimal v alue from 000 to 255. Pad entries of less than three di gits with zeros, as in “005”. T o configure this f eature,[...]
-
Página 47
Interface Features Product Reference Guide 3-21 RS-232 Interface Features — cont. Retry on ACK NAK Timeout Enables/disables retry after the configurable ACK NAK T imeout V alue (set in the following fea- ture ) ha s ex pire d. ACK NAK Timeout Value ST ART / END PROGRAMMING BARCODES Disable Retry on ACK NAK Timeout Enable Retry on A CK NAK Timeout[...]
-
Página 48
Interface Related Features 3-22 Magellan ® 1000i RS-232 Interface Features — cont. ACK NAK Retry Count ST ART / END PROGRAMMING BARCODES This feature sets the n umber of times for the scanner to retry a label transmission under a retr y condition. 000 = No retry 001 - 254 = Retry for the specified number of times 255 = Retr y f orever T o config[...]
-
Página 49
Interface Features Product Reference Guide 3-23 ACK NAK Error Handling This item specifies the method the scanner will use to handle errors detected while waiting to receive the A CK character from the host. Errors include unrecognized host commands and com- munication errors such as parity or framing errors. Choices are: 00 = Ignore errors detecte[...]
-
Página 50
Interface Related Features 3-24 Magellan ® 1000i RS-232 Interface Features — cont. Transmission Failure Indication Enables/disables bad-label indication upon transmission failure. IBM-USB Interface Features IBM-USB Device usage The IBM-USB protocol allows for the scanner to be identified as one of two differ ent types of bar code scanners. Depen[...]
-
Página 51
Interface Features Product Reference Guide 3-25 IBM IBM Transmit Labels in Code 39 Format This feature enables/disables scanner's ability to set a symbology identifier for a specified label to Code 39 before transmitting that label data to an IBM host. This applies to: Code 128, Coda- bar and Code 93 for IBM USB; Code 128, Codabar and Code 93 [...]
-
Página 52
Interface Related Features 3-26 Magellan ® 1000i Wand Emulation Supported Symbologies The W and Emulation interface will transmit bar code data as a wand device would. This inter- face will transmit the following bar code symbologies: •U P C / E A N • UPC/EAN with addons •C o d e 3 9 • F ull ASCII Code 39 • Interleaved 2 of 5 • Codabar[...]
-
Página 53
Interface Features Product Reference Guide 3-27 Wand Emulation — cont. Bar/Space Polarity Low/H igh — Black will be transmitted as a low voltage level (0 to +0.7V) and space as high level (+2.4 to +5.25V). High/Lo w — Black will be transmitted as a high voltage level (+2.4 to +5.25V) and space as low level (0 to +0.7V). Wand Idle State This f[...]
-
Página 54
Interface Related Features 3-28 Magellan ® 1000i Wand Emulation — cont. Signal Speed The speed of the transmission can be set. This selects the width of the minimum narrow bar . 330 microseconds 660 microseconds Transmit Trailing Noise The transmission of noise pulses after the label may be enabled or disabled. ST ART / END PROGRAMMING BARCODES [...]
-
Página 55
Interface Features Product Reference Guide 3-29 Wand Emulation — cont. Transmit Leading Noise The transmission of noise pulses before the bar code may be enabled or disabled. Symbology Conversion W and Emulation can conver t all bar codes to a single symbology . Choices are: No C o n v e r s i o n Convert to Code 39 Convert to Code 128 ST ART / E[...]
-
Página 56
Interface Related Features 3-30 Magellan ® 1000i Keyboard Wedge and USB Keyboard As a keyboard interface, the scanner supports most popular PCs and IBM terminals. The instal- lation of the wedge is a fairly simple process that doesn ’ t requir e any changes of software or hard- ware. Keyboard Layout The Keyboard Lay out option suppor ts many cou[...]
-
Página 57
Interface Features Product Reference Guide 3-31 Keyboard Wedge — cont. ST ART / END PROGRAMMING BARCODES Italy Norwa y P or tugal Spain Sweden Switzerland Japan 106 K ey Hungar y Czech[...]
-
Página 58
Interface Related Features 3-32 Magellan ® 1000i Keyboard Wedge — cont. Caps Lock State S pecifies the format in which the scanner sends character data. ST ART / END PROGRAMMING BARCODES Slov akia Romania Croatia P oland ST ART / END PROGRAMMING BARCODES Disable Caps Lock DEF AUL T Caps Lock “ON” Shift Lock “ON”[...]
-
Página 59
Interface Features Product Reference Guide 3-33 Keyboard Wedge — cont. Power-On Simulation All PCs check the keyboard status during the po wer-on Selftest. It is r ecommended that you enable this function if you are working without a keyboar d installation. It simulates keyboard timing and passes the keyboard status to the PC during po wer-on. NO[...]
-
Página 60
Interface Related Features 3-34 Magellan ® 1000i Control Characters S pecifies how the scanner transmits ASCII control characters to the host. Choices are: • Disable Control Characters • Enable transmission of control characters to host • Send characters between 00H and 1FH accor ding to a special function-key mapping table. (This is used to[...]
-
Página 61
Interface Features Product Reference Guide 3-35 Keyboard Wedge — cont. Wedge Quiet Interval Quiet Interval is the amount of time to look for keyboard activity before the scanner breaks the keyboard connection in or der to transmit data to the host. NO TE This feature does not apply to the USB K eyboard interface. ST ART / END PROGRAMMING BARCODES[...]
-
Página 62
Interface Related Features 3-36 Magellan ® 1000i Keyboard Wedge — cont. Intercharacter Delay NO TE This feature does not apply to the USB K eyboard interface. ST ART / END PROGRAMMING BARCODES One-half of the delay specified below is inser ted between scancodes within each character . If the transmission speed is too hig h, the system may not be[...]
-
Página 63
Product Reference Guide 4-1 Chapter 4 Data Editing Data Editing Overview When a bar code is scanned, additional information can be sent to the host computer along with the bar code data. This combination of bar code data and supplementary user-defined data is called a “ message string.” The features in this chapter can be used to build specific[...]
-
Página 64
Data Editing 4-2 Magellan ® 1000i • Enter prefix es and suffixes in the order in which you want them to appear on the output. Global Prefix/Suffix U p to 20 ASCII characters may be added as a prefix (in a position before the bar code data) and/ or as a suffix (in a position following the bar code data) as indicated in Figure 4-2 . Figure 4-2. Pr[...]
-
Página 65
Global Prefix/Suffix Product Reference Guide 4-3 Global Prefix/Suffix — cont. ST ART / END PROGRAMMING BARCODES Sets up to 20 characters each from the set of ASCII characters or an y hex value from 0 to FF . T o configure this f eature, scan t he “ST ART/END” bar code abov e to place the unit in Programming Mode, then the “Set Prefix” or [...]
-
Página 66
Data Editing 4-4 Magellan ® 1000i AIM ID AIM (Automatic I dentification Manufacturers) label identifiers ar e assigned from a globally standardized list — as opposed to custom label ID characters you select y ourself — and can be included with scanned bar code data. AIM label identifiers consist of three characters as follows: • A close brac[...]
-
Página 67
Label ID Product Reference Guide 4-5 Label ID A L ab el ID i s a cu st om iz ab le c od e o f u p t o t wo A SC II ch ar ac te r s ( 00 -F F) , u se d t o id en ti fy a b ar code (symbology) type. See Appendix D , Default Settings , for a listing for common symbologies. I t can be appended previous to or following the transmitted bar code data depe[...]
-
Página 68
Data Editing 4-6 Magellan ® 1000i Label ID — cont. ST ART / END PROGRAMMING BARCODES Label ID T ransmission: Disable Label ID P osition: Before Bar Code Data DEF AUL T Label ID P osition: After Bar Code Data Set UPC-A Label ID Character(s) DEF AUL T SETTING FOR THIS FEA TURE: A (41 hex) DEF AUL T SETTING FOR THIS FEA TURE: A (41 hex) Set UPC-A w[...]
-
Página 69
Label ID Product Reference Guide 4-7 Label ID — cont. ST ART / END PROGRAMMING BARCODES DEF AUL T SETTING FOR THIS FEA TURE: E (45 hex) Set UPC-E w/P2 Addon Label ID Character(s) Set UPC-E w/P5 Addon Label ID Character(s) DEF AUL T SETTING FOR THIS FEA TURE: E (45 hex) DEF AUL T SETTING FOR THIS FEA TURE: E (45 hex) Set UPC-E w/C128 Addon Label I[...]
-
Página 70
Data Editing 4-8 Magellan ® 1000i Label ID — cont. ST ART / END PROGRAMMING BARCODES DEF AUL T SETTING FOR THIS FEA TURE: F (46 hex) Set EAN-13 w/P2 Addon Label ID Character(s) Set EAN-13 w/P5 Addon Label ID Character(s) DEF AUL T SETTING FOR THIS FEA TURE: F (46 hex) DEF AUL T SETTING FOR THIS FEA TURE: F (46 hex) Set EAN-13 w/C128 Addon Label [...]
-
Página 71
Label ID Product Reference Guide 4-9 Label ID — cont. ST ART / END PROGRAMMING BARCODES DEF AUL T SETTING FOR THIS FEA TURE: G8 (4738 hex) Set GTIN w/C128 addon Label ID Character(s) Set RSS-14 Label ID Character(s) DEF AUL T SETTING FOR THIS FEA TURE: R4 (5234 hex) DEF AUL T SETTING FOR THIS FEA TURE: RX (5258 hex) Set RSS Expanded Label ID Char[...]
-
Página 72
Data Editing 4-10 Magellan ® 1000i Label ID — cont. ST ART / END PROGRAMMING BARCODES DEF AUL T SETTING FOR THIS FEA TURE: % (25 hex) Set Codabar Label ID Character(s) Set Code 93 Label ID Character(s) DEF AUL T SETTING FOR THIS FEA TURE: & (26 hex) DEF AUL T SETTING FOR THIS FEA TURE: @ (40 hex) Set Code 11 Label ID Character(s) Set MSI/Ple[...]
-
Página 73
Case Conversion Product Reference Guide 4-11 Case Conversion This feature can convert scanned bar code data to either all lo wer case (a through z) or all upper case (A through Z) characters. NO TE Case con version affects ONL Y scanned bar code data, and does not affect Label ID , Prefix, Suffix, or other appended data. ST ART / END PROGRAMMING BA[...]
-
Página 74
Data Editing 4-12 Magellan ® 1000i Character Conversion Character conversion is an eight byte configuration item. The eight bytes ar e 4 character pairs represented in hexadecimal ASCII v alues. The first character in the pair is the character that will be converted. The second character in the pair is the character to convert to. If the charac- t[...]
-
Página 75
Product Reference Guide 5-1 Chapter 5 Symbologies The scanner supports the following symbologies (bar code types). Options for each symbology are included in this chapter . Factory Defaults — for the standard RS-232 interface are indicated in bold text thr oughout this section. Reference Appendix D , Default Settings for default ex ceptions for y[...]
-
Página 76
Symbologies 5-2 Magellan ® 1000i UPC-A — continued Check Digit Transmission Enable this option to transmit the check digit along with UPC-A bar code data. Expand UPC-A to EAN-13 Expands UPC-A data to the EAN-13 data format. Selecting this featur e also changes the sym- bology ID to match those required for EAN-13. ST ART / END PROGRAMMING BARCOD[...]
-
Página 77
UPC-A Product Reference Guide 5-3 UPC-A — continued Number System Transmission This feature enables/disables transmission of UPC-A System N umber . UPC-A Minimum Reads This feature specifies the minimum number of consecutive times a UPC-A label must be decoded before it is accepted as good read. ST ART / END PROGRAMMING BARCODES Disable Number Sy[...]
-
Página 78
Symbologies 5-4 Magellan ® 1000i UPC-A — continued UPC-A In-store Minimum Reads This feature specifies the minimum number of consecutive times an in-store printed label must be decoded before it is accepted as good read. ST ART / END PROGRAMMING BARCODES Minimum = 1 Read DEF AUL T Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads[...]
-
Página 79
UPC-E Product Reference Guide 5-5 UPC-E The following options apply to the UPC-E symbology . Disable/Enable UPC-E When disabled, the scanner will not read UPC-E bar codes. Check Digit Transmission Enable this option to transmit the check digit along with UPC-E bar code data. ST ART / END PROGRAMMING BARCODES Disable UPC-E Enable UPC-E DEF AUL T ST [...]
-
Página 80
Symbologies 5-6 Magellan ® 1000i UPC-E — continued Number System Digit The N umber System Digit (NSD) which is always a zero (0) in the leading position can be optionally included (or not) with scanned bar code data. Expand to UPC-E to UPC-A Enables/disables expansion of UPC-E labels to UPC-A. Selecting this feature also changes the symbology ID[...]
-
Página 81
UPC-E Product Reference Guide 5-7 UPC-E — continued Expand UPC-E to EAN13 Enables/disables expansion of UPC-E labels to EAN-13. Selecting this featur e also changes the symbology ID to match those required for EAN-13. Minimum Reads This feature specifies the minimum number of consecutive times a UPC-E label must be decoded before it is accepted a[...]
-
Página 82
Symbologies 5-8 Magellan ® 1000i GTIN The following options apply to the GTIN label data format. Expand UPC/EAN to GTIN When this feature is enabled, the scanner will translate UPC/EAN labels to the 14 digit GTIN format. ST ART / END PROGRAMMING BARCODES Don’t Expand to GTIN DEF AUL T Expand to GTIN[...]
-
Página 83
EAN-13 Product Reference Guide 5-9 EAN-13 The following options apply to the EAN-13 symbology . Disable/Enable EAN-13 When disabled, the scanner will not read EAN-13 bar codes. Check Digit Transmission Enable this option to transmit the check digit along with EAN-13 bar code data. ST ART / END PROGRAMMING BARCODES Disable EAN-13 Enable EAN-13 DEF A[...]
-
Página 84
Symbologies 5-10 Magellan ® 1000i EAN-13 — continued EAN-13 Flag 1 Character Enables/disables transmission of an EAN/JAN13 Fl ag1 character . ISBN When enabled, this feature truncates the leading three digits from labels that contain ISBN (International S tandard Book N umber) and appends an ISBN check character to the end of the label. These co[...]
-
Página 85
EAN-13 Product Reference Guide 5-11 EAN-13 — continued Minimum Reads This feature specifies the minimum number of consecutive times an EAN-13 label must be decoded before it is accepted as good read. ST ART / END PROGRAMMING BARCODES Minimum = 1 Read DEF AUL T Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads[...]
-
Página 86
Symbologies 5-12 Magellan ® 1000i EAN-8 The following options apply to the EAN-8 symbology . Disable/Enable EAN-8 When disabled, the scanner will not read EAN-8 bar codes. Check Digit Transmission Enable this option to transmit the check Digit along with EAN-8 bar code data. ST ART / END PROGRAMMING BARCODES Disable EAN-8 Enable EAN-8 DEF AUL T ST[...]
-
Página 87
EAN-8 Product Reference Guide 5-13 EAN-8 — continued Expand EAN-8 to EAN-13 — Expands EAN-8 data to the EAN-13 data format. Selecting this feature also changes the symbology ID to match those requir ed for EAN-13. Minimum Reads This feature specifies the minimum number of consecutive times an EAN-8 label must be decoded before it is accepted as[...]
-
Página 88
Symbologies 5-14 Magellan ® 1000i Enable EAN Two-Label Enables/disables the ability of the scanner to decode EAN two-label pairs. ST ART / END PROGRAMMING BARCODES Disable EAN T wo-Label Enable EAN T wo-Label[...]
-
Página 89
Add-ons Product Reference Guide 5-15 Add-ons Add-ons (or supplemental characters) are commonly added to the end of UPC/EAN bar codes. The scanner will read the add-ons if they are enabled and in the field of view . Three add-on types are supported: 2-digit, 5-digit and Code 128 add-ons. S uppor ted options are: None — This option directs the scan[...]
-
Página 90
Symbologies 5-16 Magellan ® 1000i Add-ons — continued ST ART / END PROGRAMMING BARCODES Disable Optional 2-Digit Add-ons DEF AUL T Enable Optional 2-Digit Add-ons Disable Optional 5-Digit Add-ons DEF AUL T Enable Optional 5-Digit Add-ons Disable Optional Code 128 Add-ons DEF AUL T Enable Optional Code 128 Add-ons[...]
-
Página 91
RSS-14 Product Reference Guide 5-17 RSS-14 The following options apply to the RSS-14 symbology . Disable/Enable RSS-14 When this feature is disabled, the scanner will not read RSS-14 bar codes. UCC/EAN 128 Emulation When enabled, RSS-14 bar codes will be translated to the UCC/EAN 128 label data format. ST ART / END PROGRAMMING BARCODES Disable RSS-[...]
-
Página 92
Symbologies 5-18 Magellan ® 1000i RSS-14 — continued Minimum Reads This feature specifies the minimum number of consecutive times an RSS-14 label must be decoded before it is accepted as good re ad. ST ART / END PROGRAMMING BARCODES Minimum = 1 Read DEF AUL T Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads[...]
-
Página 93
RSS Expanded Product Reference Guide 5-19 RSS Expanded The following options apply to the RSS Expanded symbology . Disable/Enable RSS Expanded When this feature is disabled, the scanner will not read RSS Expanded bar codes. UCC/EAN 128 Emulation When enabled, RSS Expanded bar codes will be translated to the UCC/EAN 128 label data for- mat. ST ART /[...]
-
Página 94
Symbologies 5-20 Magellan ® 1000i RSS Expanded — continued Length Control Fixed Length Decoding — When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding — When variable length decoding is enabled, the scanner will decode a bar code [...]
-
Página 95
RSS Expanded Product Reference Guide 5-21 RSS Expanded — continued RSS Expanded Length 1, Length 2 Programming Instructions 1. Scan the ST AR T/END bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C, Alpha-Numeric P ad and scan the three digits (zero padded) repr esent- ing the length in decimal notation. [...]
-
Página 96
Symbologies 5-22 Magellan ® 1000i RSS Expanded — continued Minimum Reads This feature specifies the minimum number of consecutive times an RSS Expanded label must be decoded before it is accepted as good read. ST ART / END PROGRAMMING BARCODES Minimum = 1 Read DEF AUL T Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads[...]
-
Página 97
Code 39 Product Reference Guide 5-23 Code 39 The following options apply to the Code 39 symbology . Disable/Enable Code 39 When this feature is disabled, the scanner will not read Code 39 bar codes. Check Character Calculation When enabled, the scanner will calculate the check character of the labels. T urn this option on only when a checksum is pr[...]
-
Página 98
Symbologies 5-24 Magellan ® 1000i Check Character Transmit Enable this option to transmit the check character with scanned bar code data. Start/Stop Characters Enables/disables transmission of Code39 start and stop characters. ST ART / END PROGRAMMING BARCODES Disable Chec k Char T ransmission Enable Check Char T ransmission DEF AUL T ST ART / END[...]
-
Página 99
Code 39 Product Reference Guide 5-25 Code 39 Full ASCII Enables/disables the translation of Code 39 characters to Code 39 full-ASCII characters . ST ART / END PROGRAMMING BARCODES Disable Code 39 Full ASCII DEF AUL T Enable Code 39 Full ASCII[...]
-
Página 100
Symbologies 5-26 Magellan ® 1000i Code 39 — continued Length Control Fixed Length Decoding — When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding — When variable length decoding is enabled, the scanner will decode a bar code if th[...]
-
Página 101
Code 39 Product Reference Guide 5-27 Code 39 Length 1, Length 2 Programming Instructions 1. Scan the ST AR T/END bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C, Alpha-Numeric P ad and scan the three digits (zero padded) repr esent- ing the length in decimal notation. 4. Scan the ST AR T/END bar code. Qui[...]
-
Página 102
Symbologies 5-28 Magellan ® 1000i Code 39 — continued Code 39 Stitching Enables/disables stitching for Code 39 labels. When parts of a Code 39 bar code are presented to the scanner with this feature enabled, the bar code parts will be assembled by the scanner ’ s software, and the data will be decoded if all bar code proofing r equirements are[...]
-
Página 103
Pharmacode 39 Product Reference Guide 5-29 Pharmacode 39 The following options apply to the Pharmacode 39 symbology . Disable/Enable Pharmacode 39 When this feature is disabled, the scanner will not read P harmacode 39 bar codes. Start/Stop Characters Enables or disables transmission of Pharmacode 39 start/stop characters. ST ART / END PROGRAMMING [...]
-
Página 104
Symbologies 5-30 Magellan ® 1000i Check Character Transmit Enable this option to transmit the check character with scanned bar code data. ST ART / END PROGRAMMING BARCODES Disable Chec k Char T ransmission Enable Check Char T ransmission DEF AUL T[...]
-
Página 105
Code 128 Product Reference Guide 5-31 Code 128 The following options apply to the Code 128 symbology . Disable/Enable Code 128 When this feature is disabled, the scanner will not read Code 128 bar codes. Transmit Function Characters Enables/disables transmission of Code128 function characters 1, 2, 3, and 4. F unction codes are transmitted as follo[...]
-
Página 106
Symbologies 5-32 Magellan ® 1000i Code 128 — continued Length Control Fixed Length Decoding — When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding — When variable length decoding is enabled, the scanner will decode a bar code if t[...]
-
Página 107
Code 128 Product Reference Guide 5-33 Code 128 — continued Code 128 Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C, Alpha-Numeric P ad and scan the three digits (zero padded) repr esent- ing the length in decimal notation. 4. Scan the END [...]
-
Página 108
Symbologies 5-34 Magellan ® 1000i Code 128 — continued Code 128 Stitching Enables/disables stitching for Code 128 labels. When parts of a Code 128 bar code are pre- sented to the scanner with this feature enabled, the bar code parts will be assembled by the scan- ner’ s software, and the data will be decoded if all bar code proofing requir eme[...]
-
Página 109
Interleaved 2 of 5 Product Reference Guide 5-35 Interleaved 2 of 5 The following options apply to the Interleav ed 2 of 5 (I 2 of 5) symbology . Disable/Enable Interleaved 2 of 5 When this feature is disabled, the scanner will not read I nterleaved 2 of 5 bar codes. Check Digit Calculation When enabled, the scanner will calculate the check digit of[...]
-
Página 110
Symbologies 5-36 Magellan ® 1000i Interleaved 2 of 5 — continued Check Digit Transmit Enable this option to transmit the check digit with scanned bar code data. ST ART / END PROGRAMMING BARCODES Disable Check Digit Calculation DEF AUL T Enable Chec k Digit Calculation[...]
-
Página 111
Interleaved 2 of 5 Product Reference Guide 5-37 Interleaved 2 of 5 — continued Length Control Fixed Length Decoding — When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding — When variable length decoding is enabled, the scanner will[...]
-
Página 112
Symbologies 5-38 Magellan ® 1000i Interleaved 2 of 5 — continued Interleaved 2 of 5 Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C, Alpha-Numeric P ad and scan the three digits (zero padded) repr esent- ing the length in decimal notation [...]
-
Página 113
Interleaved 2 of 5 Product Reference Guide 5-39 Interleaved 2 of 5 — continued Interleaved 2 of 5 Stitching Enables/disables stitching for Interleaved 2 of 5 labels. When parts of an Interleav ed 2 of 5 bar code are presented to the scanner with this featur e enabled, the bar code parts will be assembled by the scanner’ s software, and the data[...]
-
Página 114
Symbologies 5-40 Magellan ® 1000i Interleaved 2 of 5 — continued Minimum Reads This feature specifies the minimum number of consecutive times an I nterleaved 2 of 5 label must be decoded before it is accepted as good read. ST ART / END PROGRAMMING BARCODES Minimum = 1 Read DEF AUL T Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads[...]
-
Página 115
Codabar Product Reference Guide 5-41 Codabar The following options apply to the Codabar symbology . Disable/Enable Codabar When this feature is disabled, the scanner will not read Codabar bar codes. Check Character Verification When enabled, the scanner will verify the check character of the labels. ST ART / END PROGRAMMING BARCODES Disable Codabar[...]
-
Página 116
Symbologies 5-42 Magellan ® 1000i Check Character Transmit Enable this option to transmit the check character with scanned bar code data. ST ART / END PROGRAMMING BARCODES Disable Chec k Char T ransmission Enable Check Char T ransmission DEF AUL T[...]
-
Página 117
Codabar Product Reference Guide 5-43 Codabar — continued Length Control Fixed Length Decoding — When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding — When variable length decoding is enabled, the scanner will decode a bar code if [...]
-
Página 118
Symbologies 5-44 Magellan ® 1000i Codabar — continued Codabar Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C, Alpha-Numeric P ad and scan the three digits (zero padded) repr esent- ing the length in decimal notation. 4. Scan the END bar c[...]
-
Página 119
Codabar Product Reference Guide 5-45 Codabar — continued Start/Stop Character Type Codabar has four pairs of S tar t/S top patterns. Select one pair to match your application. Start/Stop Character Transmission The transmission of start and end characters of Codabar is selected below . ST ART / END PROGRAMMING BARCODES Star t/Stop T ype: ABCD/TN*E[...]
-
Página 120
Symbologies 5-46 Magellan ® 1000i Start/Stop Character Match This feature enables/disables the requir ement that star t and stop characters match . Codabar Stitching Enables/disables stitching for Codabar labels. When parts of a Codabar label are presented to the scanner with this feature enabled, the bar code parts will be assembled by the scanne[...]
-
Página 121
Codabar Product Reference Guide 5-47 Codabar — continued Minimum Reads This feature specifies the minimum number of consecutive times a Codabar label must be decoded before it is accepted as a good read. ST ART / END PROGRAMMING BARCODES Minimum = 1 Read DEF AUL T Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads[...]
-
Página 122
Symbologies 5-48 Magellan ® 1000i Code 93 The following options apply to the Code 93 symbology . Disable/Enable Code 93 When this feature is disabled, the scanner will not read Code 93 bar codes. ST ART / END PROGRAMMING BARCODES Disable Code 93 DEF AUL T Enable Code 93[...]
-
Página 123
Code 93 Product Reference Guide 5-49 Code 93 — continued Length Control Fixed Length Decoding — When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding — When variable length decoding is enabled, the scanner will decode a bar code if [...]
-
Página 124
Symbologies 5-50 Magellan ® 1000i Code 93 — continued Code 93 Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C, Alpha-Numeric P ad and scan the three digits (zero padded) repr esent- ing the length in decimal notation. 4. Scan the END bar c[...]
-
Página 125
Code 93 Product Reference Guide 5-51 Code 93 — continued Code 93 Stitching Enables/disables stitching for Code 93 bar codes. When parts of a Code 93 label are presented to the scanner with this feature enabled, the bar code parts will be assembled by the scanner ’ s software, and the data will be decoded if all bar code proofing r equirements a[...]
-
Página 126
Symbologies 5-52 Magellan ® 1000i MSI/Plessey The following options apply to the MSI/Plessey symbology . Disable/Enable MSI/Plessey When this feature is disabled, the scanner will not read MSI/P lessey bar codes. Check Digit Verification This feature specifies whether one or two check digits are to be calculated and v erified. ST ART / END PROGRAM[...]
-
Página 127
MSI/Plessey Product Reference Guide 5-53 MSI/Plessey — continued Check Digit Transmit When this option is enabled, the scanner will transmit one-digit or two-digit check digits, depending upon the setting for check digit verification. Number of Check Characters S pecifies number of MSI/Plessey check characters to be calculated and verified ST ART[...]
-
Página 128
Symbologies 5-54 Magellan ® 1000i MSI/Plessey — continued Length Control Fixed Length Decoding — When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding — When variable length decoding is enabled, the scanner will decode a bar code i[...]
-
Página 129
MSI/Plessey Product Reference Guide 5-55 MSI/Plessey — continued MSI/Plessey Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C, Alpha-Numeric P ad and scan the three digits (zero padded) repr esent- ing the length in decimal notation. 4. Scan[...]
-
Página 130
Symbologies 5-56 Magellan ® 1000i MSI/Plessey — continued MSI/Plessey Stitching Enables/disables stitching for MSI/Plessey bar codes. When parts of an MSI/Plessey label are presented to the scanner with this feature enabled, the bar code parts will be assembled by the scanner’ s software, and the data will be decoded if all bar code proofing r[...]
-
Página 131
MSI/Plessey Product Reference Guide 5-57 MSI/Plessey — continued Minimum Reads This feature specifies the minimum number of consecutive times an MSI/Plessey label must be decoded before it is accepted as good read. ST ART / END PROGRAMMING BARCODES Minimum = 1 Read DEF AUL T Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads[...]
-
Página 132
Symbologies 5-58 Magellan ® 1000i Standard 2 of 5 The following options apply to the S tandard 2 of 5 symbology . Disable/Enable Standard 2 of 5 When this feature is disabled, the scanner will not read S tandard 2 of 5 bar codes. Check Digit Verification When enabled, the scanner will verify the check digit of the labels. ST ART / END PROGRAMMING [...]
-
Página 133
Standard 2 of 5 Product Reference Guide 5-59 Standard 2 of 5 — continued Check Digit Transmit When this option is enabled, the scanner will transmit the check digit. ST ART / END PROGRAMMING BARCODES Disable Chec k Digit T ransmission Enable Check Digit T ransmission DEF AUL T[...]
-
Página 134
Symbologies 5-60 Magellan ® 1000i Standard 2 of 5 — continued Length Control Fixed Length Decoding — When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding — When variable length decoding is enabled, the scanner will decode a bar co[...]
-
Página 135
Standard 2 of 5 Product Reference Guide 5-61 Standard 2 of 5 — continued Standard 2 of 5 Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C, Alpha-Numeric P ad and scan the three digits (zero padded) repr esent- ing the length in decimal notat[...]
-
Página 136
Symbologies 5-62 Magellan ® 1000i Standard 2 of 5 — continued Standard 2 of 5 Stitching Enables/disables stitching for S tandard 2 of 5 bar codes. When parts of a Standar d 2 of 5 label are presented to the scanner with this featur e enabled, the bar code par ts will be assembled by the scanner’ s software, and the data will be decoded if all [...]
-
Página 137
Standard 2 of 5 Product Reference Guide 5-63 Standard 2 of 5 — continued Minimum Reads This feature specifies the minimum number of consecutive times a S tandard 2 of 5 label must be decoded before it is accepted as good read. ST ART / END PROGRAMMING BARCODES Minimum = 1 Read DEF AUL T Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads[...]
-
Página 138
Symbologies 5-64 Magellan ® 1000i NOTES[...]
-
Página 139
Product Reference Guide A-1 Appendix A Product Specifications Optical and Read Performance Parameters Scanner Dimensions Parameter S pecification Scan V olume 70 cubic inches Scan P atter n 100 lines Scan Rate 1,100 digital scan lines Minimum Resolution 5 mil Depth of Field (100% UPC Labels) 0 - 6” Minimum Print Contrast Ratio 25% Skew (Y aw) ± [...]
-
Página 140
A-2 Magellan ® 1000i Physical Properties Electrical Parameters Environmental Parameters Other Parameters Parameter S pecification Dimensions (Scanner only): 3.3” x2.8” x3.7” Dimensions (Scanner w/Base Station): 5.5” x2.9” x3.8” Weight (Scanner) 7.0 oz. Weight (Base Station) 6.6 oz. Parameter S pecification Operating V oltage (T wo Mode[...]
-
Página 141
Product Reference Guide B-1 Appendix B Cable Pinouts Standard Cable Pinouts (Primary Interface Cables) RS-232 IBM Port 5B/9B/17 1 2C T S 3 4R T S 5R X D 6T X D 7 8 VCC IN 9G N D 10 1 2 3 4D A T A - 5 6D A T A + 7 8V C C _ I N 9G N D 10 Pin 1 10 Position RJ (Scanner End) Pin 1 10 Position RJ (Scanner End)[...]
-
Página 142
Cable Pinouts B-2 Magellan ® 1000i IBM USB USB & USB Keyboard Wand Emulation Keyboard Wedge 1 2 3 4D - 5 6D + 7 8V I N 9G N D 10 1 2 3 4D - 5 6D + 7 8V B U S _ V I N 9G N D 10 1 2 3 W AND~ 4 5 6 7 8V C C _ I N 9G N D 10 1 2K B _ D A T A 3 A T_CLK 4K B _ C L K 5 6A T _ D A T A 7 8V C C _ I N 9G N D 10 Pin 1 10 Position RJ (Scanner End) Pin 1 10[...]
-
Página 143
Product Reference Guide C-1 Appendix C Alpha-Numeric Pad A B C D E F[...]
-
Página 144
C-2 Magellan ® 1000i Alpha-Numeric Pad 1 2 3 0 9 8 7 6 5 4[...]
-
Página 145
Product Reference Guide D-1 Appendix D Default Settings Defaults by Symbology The following is a partial list of key settings for each symbology type. Interface Default Exceptions The factory default settings indicated in the programming sections (in bold text) reflect factor y configuration for the RS-232 standard interface. The following tables l[...]
-
Página 146
D-2 Magellan ® 1000i IBM Interfaces IBM Interfaces include IBM-USB, IBM P ort 9B, IBM P ort5B and IBM P ort17. RS-232 Wincor/Nixdorf Parameter Default Setting IBM Interface T ype IBM P or t 9B Number of Host T ransmit Buffers One Buffer Label I.D . T ransmission Disable Suffix Characters No Suffix Parameter Default Setting Interface T ype RS-232-W[...]
-
Página 147
Interface Default Exceptions Product Reference Guide D-3 Wand Emulation Keyboards Keyboard interfaces include USB Keyboard and Keyboar d W edge A-Y. Parameter Default Setting Interface T ype Wand Emulation Code 39 Star t/Stop Character T ransmission Enable Parameter Default Setting K eyboard Wedge Interf ace T ype USB K eyboard Label ID T ransmissi[...]
-
Página 148
D-4 Magellan ® 1000i NOTES[...]
-
Página 149
Product Reference Guide E-1 Appendix E Keyboard Function Key Mappings Keyboard Model Cross Reference Ta b l e E - 1 summarizes the keyboard models, their defined protocol, scancode set, and some unique features. The remaining tables in this chapter pro vide the function key maps associated with each of the scancode sets. Table E-1. Keyboard Model C[...]
-
Página 150
E-2 Magellan ® 1000i Table E-2. Scanset 1 Function Key Map Table E-3. Scanset 2 Function Key Map ASCII (hex) ASCII code K ey Scancode 00 NUL AL T r ight Make E0h 38h 01 SOH AL T right Break E0h B8h 02 STX AL T left Mak e 38h 03 ETX AL T left Break B8h 04 EO T CTRL left Make 1Dh 05 ENQ CTRL left Break 9Dh 06 A CK CTRL right Make E0h 1Dh 07 BEL CTRL[...]
-
Página 151
Keyboard Model Cross Reference Product Reference Guide E-3 Table E-4 . Scanset 3, 102-Key Function Key Map 1B ESC ESC 76h 1C FS F7 83h 1D GS F8 0Ah 1E RS F9 01h 1F US F10 09h ASCII (hex) ASCII code Key Scancode 00 NUL AL T right Make 39h 01 SOH AL T right Break F0h 39h 02 STX AL T left Make 19h 03 ETX AL T left Break F0h 19h 04 EO T CTRL left Make [...]
-
Página 152
E-4 Magellan ® 1000i Table E-5. Scanset 3 122-Key Function Key Map ASCII (hex) ASCII code Key Scancode 00 NUL AL T Right Make 39h 01 SOH AL T Right Break F0h 39h 02 STX AL T left Mak e 19h 03 ETX AL T left Break F0h 19h 04 EO T CTRL left (RESET) Make only 11h 05 ENQ CTRL left (RESET) Mak e/Break 11h F0h 11h 06 A CK ONLINE Enter Make only 58h 07 BE[...]
-
Página 153
Keyboard Model Cross Reference Product Reference Guide E-5 Table E-6. Japanese DOS Function Key Map ASCII value ASCII code Key Scancode 00h NUL AL T right Make 31h 01h SOH AL T right Break B1h 02h STX AL T left Make 31h 03h ETX AL T left Break B1h 04h EO T CTRL left Mak e 41h 05h ENQ CTRL left Break C1h 06h ACK CTRL r ight Make 41h 07h BEL CTRL r i[...]
-
Página 154
E-6 Magellan ® 1000i Table E-7. NEC 9801-Key Function Key Map ASCII value ASCII code Key Scancode 00h NUL unused n/a 01h SOH CR 1Ch 02h STX CAPS LOCK ON (make) 71h 03h ETX CAPS LOCK OFF (break) F1h 04h EO T CTRL left Make 74h 05h ENQ CTRL left Break F4h 06h A CK CTRL-C 60h 07h BEL n/a n/a 08h BS BS 0Eh 09h HT T AB right 0Fh 0Ah LF RIGHT arrow (inn[...]
-
Página 155
Product Reference Guide F-1 Appendix F Host Commands Accepting RS-232 Commands The scanner responds to the following RS-232 commands: If one of the abov e commands is received, the scanner will perform the steps indicated for the command. Host commands for other interfaces are also available. Contact T ech Support for more details. COMMAND ASCII HE[...]
-
Página 156
F-2 Magellan ® 1000i NOTES[...]
-
Página 157
Product Reference Guide G-1 Appendix G Sample Symbols 0 1234567890 1234567890 Code 128 9 780330 290951 BC321 123456-9$ 123456 UPC-A Code 128 Code 39 Code 93 Interleav ed 2 of 5 EAN-13 Code 2 of 5 A13579B Codabar 05[...]
-
Página 158
G-2 Magellan ® 1000i Sample Symbols (01)00123456789012 RSS-14 0100123456789050 RSS Expanded[...]
-
Página 159
ASCII Char t ASCII Char . Hex No . ASCII Char . Hex No . ASCII Char . Hex No . ASCII Char . Hex No . NUL SOH STX ETX EO T ENQ ACK BEL BS HT LF VT FF CR SO SI DLE DC1 DC2 DC3 DC4 NAK SYN ETB CAN EM SUB ESC FS GS RS US 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F SP ! “ # $ % & ’ ( ) * + , - [...]
-
Página 160
A ustralia Datalogic Scanning Pty Ltd Nor th Ryde, A ustralia T elephone: [61] (2) 9870 3200 F ax: [61] (2) 9878 8688 France and Benelux Datalogic Scanning Sarl LES ULIS Cede x, F rance T elephone: [33].01.64.86.71.00 F ax: [33].01.64 46.72.44 German y Datalogic Scanning GmbH D arm st ad t , G erm an y T elephone: 49 (0) 61 51/93 58-0 F ax: 49 (0) [...]