Ir a la página of
manuales de instrucciones parecidos
-
Personal Computer
Dell X3155
210 páginas 22.49 mb -
Personal Computer
Dell Studio XPS 0KM04CA00
74 páginas 1.67 mb -
Personal Computer
Dell KR019
76 páginas 1.63 mb -
Personal Computer
Dell E1405
188 páginas 2.57 mb -
Personal Computer
Dell U7021
154 páginas 5.29 mb -
Personal Computer
Dell E521
63 páginas 2.18 mb -
Personal Computer
Dell POWEREDGE EMU01
166 páginas 9.11 mb -
Personal Computer
Dell R610
210 páginas 6.35 mb
Buen manual de instrucciones
Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Dell 990. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Dell 990 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.
¿Qué es un manual de instrucciones?
El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Dell 990 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.
Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Dell 990, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.
Entonces, ¿qué debe contener el manual de instrucciones perfecto?
Sobre todo, un manual de instrucciones Dell 990 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Dell 990
- nombre de fabricante y año de fabricación del dispositivo Dell 990
- condiciones de uso, configuración y mantenimiento del dispositivo Dell 990
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas
¿Por qué no leemos los manuales de instrucciones?
Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Dell 990 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Dell 990 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Dell en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Dell 990, como se suele hacer teniendo una versión en papel.
¿Por qué vale la pena leer los manuales de instrucciones?
Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Dell 990, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.
Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Dell 990. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.
Índice de manuales de instrucciones
-
Página 1
Dell OptiPlex 990 Desktop Service Manual Regulatory Model: D05D Regulatory Type: D05D001[...]
-
Página 2
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Information in this publicati[...]
-
Página 3
Contents Notes, Cautions, and Warnings ..................................................................2 1 Working on Your Computer ......................................................................9 Before Working Inside Your Computer .............................................................................9 Recommended Tools ...........[...]
-
Página 4
Installing The Memory .....................................................................................................28 8 Chassis Intrusion Switch ........................................................................ 29 Removing the Chassis Intrusion Switch .......................................................................... 29 Insta[...]
-
Página 5
16 Power Supply .......................................................................................... 49 Removing The Power Supply .......................................................................................... 49 Installing The Power Supply ........................................................................................... [...]
-
Página 6
Controller has failed .................................................................................................. 84 Data error ................................................................................................................. 84 Decreasing available memory ......................................................................[...]
-
Página 7
Shutdown failure ...................................................................................................... 89 Time-of-day clock stopped ...................................................................................... 89 Time-of-day not set-please run the System Setup program ................................... 90 Timer chip count[...]
-
Página 8
8[...]
-
Página 9
1 Working on Your Computer Before Working Inside Your Computer Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your personal safety. Unless otherwise noted, each procedure included in this document assumes that the following conditions exist: • You have read the safety information that[...]
-
Página 10
NOTE: The color of your computer and certain components may appear differently than shown in this document. To avoid damaging your computer, perform the following steps before you begin working inside the computer. 1. Ensure that your work surface is flat and clean to prevent the computer cover from being scratched. 2. Turn off your computer (see T[...]
-
Página 11
Click Start , then click the arrow in the lower-right corner of the Start menu as shown below, and then click Shut Down . – In Windows XP: Click Start → Turn Off Computer → Turn Off . The computer turns off after the operating system shutdown process is complete. 2. Ensure that the computer and all attached devices are turned off. If your com[...]
-
Página 12
12[...]
-
Página 13
2 Cover Removing the Cover 1. Follow the procedures in Before Working Inside Your Computer . 2. Pull up the cover-release latch at the side of the computer. 3. Lift the cover upward to a 45–degree angle and remove it from the computer. Installing The Cover 1. Place the computer cover on the chassis. 2. Press down on the computer cover until it cl[...]
-
Página 14
3. Follow the procedures in After Working Inside Your Computer . 14[...]
-
Página 15
3 Front Bezel Removing the Front Bezel 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the cover . 3. Pry the front bezel retention clips away from the chassis. 4. Rotate the bezel away from the computer to release the hooks on the opposite edge of the bezel from the chassis. 15[...]
-
Página 16
Installing The Front Bezel 1. Insert the hooks along the bottom edge of the front bezel into the slots on the chassis front. 2. Rotate the bezel towards the computer to engage the four front-bezel retention clips until they click into place. 3. Install the cover . 4. Follow the procedures in After Working Inside Your Computer . 16[...]
-
Página 17
4 Cards Removing the Expansion Card 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the cover . 3. Rotate the release tab on the card-retention latch upward. 4. Pull the release lever away from the PCIe x16 card to release the securing tab from the dent in the card. Then, ease the card up and out of its connector and rem[...]
-
Página 18
6. Lift the PCI expansion card (if any) up and out of its connector and remove it from the computer. 7. Lift the PCI x4 expansion card (if any) up and out of its connector and remove it from the computer. 18[...]
-
Página 19
Installing The Expansion Card 1. Insert the PCIe x4 card into the connector on the system board and press down to secure it in place. 2. Insert the PCIe card (if any) into the connector on the system board and press down to secure it in place. 3. Insert the PCIe x1 card (if any) into the connector on the system board and press down to secure it in [...]
-
Página 20
20[...]
-
Página 21
5 Optical Drive Removing the Optical Drive 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the cover . 3. Remove the front bezel . 4. Remove the data cable and power cable from the back of the optical drive. 5. Slide up the optical-drive latch and then push the optical drive from the back towards the front of the compute[...]
-
Página 22
Installing The Optical Drive 1. Slide down the optical-drive latch and push the optical drive from the front towards the back of the computer. 2. Connect the data cable and power cable to the optical drive. 3. Install the front bezel . 4. Install the cover . 5. Follow the procedures in After Working Inside Your Computer . 22[...]
-
Página 23
6 Hard Drive Removing the Hard Drive 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the cover . 3. Remove the data cable and power cable from the back of the hard drive. 4. Press the hard-drive bracket latch towards the hard drive and lift it upward. 5. Flex the hard-drive bracket and then remove the single 3.5 inch har[...]
-
Página 24
6. Turn over the hard-drive bracket and release the screws that secure the 2.5 inch hard drive to the underside of the bracket. 7. Flex the hard-drive bracket and then remove the two 2.5 inch hard drives from the bracket. 8. Release the screws that secure the 2.5 inch hard drive to the top of the hard-drive bracket. 24[...]
-
Página 25
9. Release the screws that secure the 2.5 inch hard drive to the underside of the hard drive bracket. Installing The Hard Drive 1. Tighten the screws to secure the 2.5 inch hard drive(s) to the hard-drive bracket. 2. Flex the hard-drive bracket and then insert the single 3.5 inch hard drive or the two 2.5 inch hard drives into the bracket. 3. Press[...]
-
Página 26
26[...]
-
Página 27
7 Memory Removing the Memory 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the cover . 3. Release the memory-retention clips on each side of the memory modules. 4. Lift the memory modules out of the connectors on the system board. 27[...]
-
Página 28
Installing The Memory 1. Insert the memory modules into the connectors on the system board. Install the memory module in the order of A1 > B1 > A2 > B2. 2. Press down on the memory modules until the retention clips spring back to secure them in place. 3. Install the cover . 4. Follow the procedures in After Working Inside Your Computer . 2[...]
-
Página 29
8 Chassis Intrusion Switch Removing the Chassis Intrusion Switch 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the cover . 3. Disconnect the intrusion-switch cable from the system board. 4. Slide the intrusion switch toward the chassis bottom and remove it from the system board. 29[...]
-
Página 30
Installing The Chassis Intrusion Switch 1. Insert the intrusion switch into the chassis rear and slide it toward the chassis top to secure it. 2. Connect the intrusion-switch cable to the system board. 3. Install the cover . 4. Follow the procedures in After Working Inside Your Computer . 30[...]
-
Página 31
9 Speaker Removing The Speaker 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the cover . 3. Disconnect the speaker cable from the system board. 4. Unthread the speaker cable from the chassis clip. 5. Press down the speaker-securing tab and slide the speaker upwards to remove it. 31[...]
-
Página 32
Installing The Speaker 1. Press the speaker-securing tab and slide the speaker downward to secure it. 2. Thread the speaker cable into the chassis clip. 3. Connect the speaker cable to the system board. 4. Install the cover . 5. Follow the procedures in After Working Inside Your Computer . 32[...]
-
Página 33
10 Heat Sink Removing The Heat Sink and Processor 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the cover . 3. Disconnect the heat-sink assembly cable from the system board. 4. Loosen the captive screws in the order: 1, 2, 3 and 4. 5. Lift the heat sink assembly upwards, and remove it from the computer. Lay the assembl[...]
-
Página 34
6. Press the release lever down and then move it outward to release it from the retention hook that secures it. 7. Lift the processor cover. 8. Lift the processor to remove it from the socket and place it in an antistatic package. 34[...]
-
Página 35
Installing The Heat Sink and Processor 1. Insert the processor into the processor socket. Ensure that the processor is properly seated. 2. Lower the processor cover. 3. Press the release lever down and then move it inward to secure it with the retention hook. 4. Place the heat sink assembly into the chassis. 5. Tighten the captive screws to secure [...]
-
Página 36
36[...]
-
Página 37
11 Coin-Cell Battery Removing The Coin-Cell Battery 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the cover . 3. Press the coin-cell battery inward to allow the battery to pop up from the socket. 4. Lift the coin-cell battery out of the computer. 37[...]
-
Página 38
Installing The Coin-Cell Battery 1. Place the coin-cell battery into its slot on the system board. 2. Press the coin-cell battery downwards until it is secured. 3. Install the cover . 4. Follow the procedures in After Working Inside Your Computer . 38[...]
-
Página 39
12 Power-Switch Cable Removing The Power-Switch Cable 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the cover . 3. Remove the front bezel . 4. Disconnect the power-switch cable from the system board. 5. Pry the power-switch cable free. 6. Slide the power-switch cable out through the front of the computer. 39[...]
-
Página 40
Installing The Power-Switch Cable 1. Slide the power-switch cable in through the front of the computer. 2. Secure the power-switch cable to the chassis. 3. Connect the power-switch cable to the system board. 4. Install the front bezel . 5. Install the cover . 6. Follow the procedures in After Working Inside Your Computer . 40[...]
-
Página 41
13 Front Thermal Sensor Removing The Front Thermal Sensor 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the cover . 3. Remove the front bezel . 4. Disconnect the thermal-sensor cable from the system board. 5. Unthread the thermal-sensor cable from the chassis clips. 6. Unthread the thermal-sensor cable from the chassis[...]
-
Página 42
7. Pry the thermal sensor away from the chassis front and remove. Installing The Front Thermal Sensor 1. Secure the thermal sensor to the chassis front. 2. Thread the thermal-sensor cable into the chassis clips. 3. Connect the thermal-sensor cable to the system board. 4. Install the front bezel . 5. Install the cover . 6. Follow the procedures in A[...]
-
Página 43
14 Chassis Fan Removing The System Fan 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the cover . 3. Remove the front bezel . 4. Disconnect the system-fan cable from the system board. 5. Unthread the system-fan cable from the chassis clips. 6. Slide the four grommets inward and through the slots in the front of the comp[...]
-
Página 44
7. Lift and remove the system fan out of the computer. 8. Pry up and remove the four grommets from the system fan. Installing The System Fan 1. Place the system fan in the chassis. 2. Pass the four grommets through the chassis and slide outwards along the grooves to secure them in place. 3. Thread the system-fan cable into the chassis clips. 44[...]
-
Página 45
4. Connect the system-fan cable to the system board. 5. Install the front bezel . 6. Install the cover . 7. Follow the procedures in After Working Inside Your Computer . 45[...]
-
Página 46
46[...]
-
Página 47
15 Input/Output Panel Removing The Input/Output Panel 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the cover . 3. Remove the front bezel . 4. Disconnect the Input/Output panel or the FlyWire cable from the system board. 5. Remove the screw that secures the Input/Output panel to the chassis. 6. Slide the Input/Output p[...]
-
Página 48
7. Remove the Input/Output panel. Installing The Input/Output Panel 1. Insert the Input/Output panel into the slot on the chassis front. 2. Slide the Input/Output panel towards the left of the computer to secure to the chassis. 3. Tighten the screw to secure the Input/Output panel to the chassis. 4. Connect the Input/Output panel or the FlyWire cab[...]
-
Página 49
16 Power Supply Removing The Power Supply 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the cover . 3. Remove the PSU thermal sensor . 4. Disconnect the 4–pin power cable from the system board. 5. Unthread the 4–pin power cable from the chassis clips. 6. Disconnect the 24–pin power cable from the system board. 49[...]
-
Página 50
7. Unthread the 24–pin power cable from the chassis clip. 8. Remove the screws that secure the power supply to the back of the computer. 9. Push in on the blue release tab beside the power supply, and slide the power towards the front of the computer. 50[...]
-
Página 51
10. Lift the power supply out of the computer. Installing The Power Supply 1. Place the power supply in the chassis and slide towards the back of the computer to secure it. 2. Tighten the screws to secure the power supply from the back of the computer. 3. Thread the 24–pin power cable into the chassis clip. 4. Connect the 24–pin power cable to [...]
-
Página 52
52[...]
-
Página 53
17 System Board Removing The System Board 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the cover . 3. Remove the front bezel . 4. Remove the hard drive . 5. Remove the expansion cards . 6. Remove the heat sink and processor . 7. Disconnect all the cables connected to the system board. 8. Lift and release the expansion[...]
-
Página 54
9. Remove the screws that secure the system board to the chassis. 10. Slide the system board towards the front of the computer. 11. Remove the system board from the chassis. Installing The System Board 1. Align the system board to the port connectors on the back of the chassis and place the system board in the chassis. 2. Tighten the screws securin[...]
-
Página 55
3. Close the expansion-card latch. 4. Connect the cables to the system board. 5. Install the heat sink and processor . 6. Install the expansion card . 7. Install the hard drive . 8. Install the front bezel . 9. Install the cover . 10. Follow the procedures in After Working Inside Your Computer . 55[...]
-
Página 56
56[...]
-
Página 57
18 Power Supply Unit (PSU) Thermal Sensor Removing The PSU Thermal Sensor 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the cover . 3. Disconnect the thermal-sensor cable from the system board. 4. Unthread the thermal-sensor cable from the chassis clip. 5. Pry the thermal sensor away from the power supply and remove fr[...]
-
Página 58
Installing The PSU Thermal Sensor 1. Secure the thermal sensor to the power supply. 2. Thread the thermal-sensor cable into the chassis clip. 3. Connect the thermal-sensor cable to the system board. 4. Install the cover . 5. Follow the procedures in After Working Inside Your Computer . 58[...]
-
Página 59
19 System Setup System Setup This computer offers you the following options: • Access System Setup by pressing <F2> • Bring up a one-time boot menu by pressing <F12> Press <F2> to enter System Setup and make changes to the user-definable settings. If you have trouble entering System Setup using this key, press <F2> when [...]
-
Página 60
benefit here is that you do not have to remember the <Ctrl><Alt><D> and <Ctrl><Alt><F10> keystrokes (although they still work). NOTE: The BIOS features an option to disable either or both of the keystroke prompts under the System Security / Post Hotkeys submenu. When you enter the <F12> or <Ctrl><A[...]
-
Página 61
Beep Codes and Text Error Messages The OptiPlex BIOS is capable of displaying error messages in plain English, along with beep codes. If the BIOS determine the previous boot was unsuccessful, it displays an error message similar to the following: Previous attempts at booting the system have failed at checkpoint ______. For help resolving this probl[...]
-
Página 62
General Mode, Memory Technology, DIMM 1 Size, DIMM 2 Size, DIMM 3 Size, and DIMM 4 Size . • Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock Speed, Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3 Cache, HT Capable, and 64-Bit Technology. • PCI Information: Displays SLOT1, SLOT2, [...]
-
Página 63
System Configuration Serial Port Allows you to define the serial port settings. You can set the serial port to: • Disabled • Auto • COM1 • COM2 • COM3 • COM4 NOTE: The operating system may allocate resources even though the setting is disabled. SATA Operation Allows you to configure the operating mode of the integrated hard drive contro[...]
-
Página 64
System Configuration If USB port is disabled, the OS cannot see any device attached to this port. • Enable USB Controller • Disable USB Mass Storage Dev • Disable USB Controller NOTE: USB keyboard and mouse always work in the BIOS setup irrespective of these settings. Miscellaneous Devices Allows you to enable or disable various on-board devi[...]
-
Página 65
Security • System Password Max Password Bypass Allows you to bypass the System (Boot) Password and the internal HDD password prompts during a system restart. • Disabled — Always prompt for the system and internal HDD password when they are set. This option is disabled by default. • Reboot Bypass — Bypass the password prompts on Restarts ([...]
-
Página 66
Security Chassis Intrusion Allows you to enable or disable the chassis intrusion feature. You can set this option to: • Clear Intrusion Warning — Enabled by default if chassis intrusion is detected. • Disable • Enable • On-Silent — Enabled by default if chassis intrusion is detected. CPU XD Support Allows you to enable or disable he exe[...]
-
Página 67
Performance Intel ® TurboBoost ™ Allows you to enable or disable Inel TurboBoost mode of the processor. • Disabled — Does not allow the TurboBoost driver to increase the performance state of the processor above the standard performance. • Enabled — Allows the Intel Turbo driver to increase the performance of the CPU or graphics processor[...]
-
Página 68
Power Management Wake on LAN This option allows the computer to power up from the off state when triggered by a special LAN signal. Wake-up from the Standby state is unaffected by this setting and must be enabled in the operating system. This feature only works when the computer is connected to AC power supply. • Disabled — Does not allow the s[...]
-
Página 69
Virtualization Support provided by Intel ® Virtualization Technology. Enable Intel ® Virtualization Technology — This option is enabled by default. VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities provided by Intel ® Virtualization technology for direct I/O. Enable Inte[...]
-
Página 70
Image Server NOTE: This field is only relevant when the "Integrated NIC" control in the "System Configuration" group is set to "Enabled with ImageServer". Client DHCP Specifies how the client obtains the IP address. • Static IP • DNS (enabled by default) NOTE: This field is only relevant when the "Integrated N[...]
-
Página 71
System Logs • Clear Log DellDiag Events Displays the DellDiag event log. Thermal Events Displays the thermal event log and allows you to: • Clear Log Power Events Allows you to clear the power event logs. • Clear Log BIOS Progress Events Displays the BIOS Progress event log. 71[...]
-
Página 72
72[...]
-
Página 73
20 Troubleshooting Diagnostic LEDs NOTE: The diagnostic LEDs only serve as an indicator of the progress through the Power-on Self-Test (POST) process. These LEDs do not indicate the problem that caused the POST routine to stop. The diagnostic LEDs are located on the front of the chassis next to the power button. These diagnostic LEDs are only activ[...]
-
Página 74
– Ensure that any power strips being used are plugged into an electrical outlet and are turned on. – Ensure that the electrical outlet is working by testing it with another device, such as a lamp. – Ensure that the main power cable and front panel cable are securely connected to the system board. LED Power Button Problem Description A possibl[...]
-
Página 75
– If the LED still does not illuminate, the problem is with the power supply. LED Power Button Problem Description Memory modules are detected, but a memory power failure has occurred. Troubleshooting Steps – If two or more memory modules are installed, remove the modules, then re-install one module and re-start the computer. If the computer st[...]
-
Página 76
Problem Description A possible system board failure has occurred. Troubleshooting Steps Remove all peripheral cards from the PCI and PCI-E slots and re-start the computer. If the computer boots, add the peripheral cards back one by one until you find the bad one. LED Power Button Problem Description Power connector not installed properly. Troublesh[...]
-
Página 77
– If the problem persists, the system board is faulty. LED Power Button Problem Description A possible coin cell battery failure has occurred. Troubleshooting Steps Remove the coin cell battery for one minute, reinstall the battery, and restart. LED Power Button Problem Description A possible processor failure has occurred. Troubleshooting Steps [...]
-
Página 78
– If available, install working memory of the same type into your computer. LED Power Button Problem Description A possible hard drive failure has occurred. Troubleshooting Steps Re-seat all power and data cables. LED Power Button Problem Description A possible USB failure has occurred. Troubleshooting Steps Re-install all USB devices and check a[...]
-
Página 79
LED Power Button Problem Description Memory modules are detected, but a memory configuration or compatibility error has occurred. Troubleshooting Steps – Ensure that no special requirements for memory module/connector placement exist. – Ensure that the memory you are using is supported by your computer. LED Power Button Problem Description A po[...]
-
Página 80
Troubleshooting Steps – Clear CMOS. – Disconnect all internal and external peripherals, and restart the computer. If the computer boots, add the peripheral cards back one by one until you find the bad one. – If the problem persists, the system board / system board component is faulty. LED Power Button Problem Description Some other failure ha[...]
-
Página 81
Cause Microprocessor register failure Code 1-1-3 Cause NVRAM Code 1-1-4 Cause ROM BIOS checksum failure Code 1-2-1 Cause Programmable interval timer Code 1-2-2 Cause DMA initialization failure Code 1-2-3 Cause DMA page register read/write failure Code 1-3-1 through 2-4-4 Cause DIMMs not being properly identified or used Code 3-1-1 Cause Slave DMA r[...]
-
Página 82
Cause Keyboard Controller Test failure Code 3-3-1 Cause NVRAM power loss Code 3-3-2 Cause NVRAM configuration Code 3-3-4 Cause Video Memory Test failure Code 3-4-1 Cause Screen initialization failure Code 3-4-2 Cause Screen retrace failure Code 3-4-3 Cause Search for video ROM failure Code 4–2–1 Cause No time tick Code 4–2–2 Cause Shutdown [...]
-
Página 83
Cause Timer-chip counter 2 failure Code 4–3–4 Cause Time-of-day clock stopped Code 4–4–1 Cause Serial or parallel port test failure Code 4–4–2 Cause Failure to decompress code to shadowed memory Code 4–4–3 Cause Math coprocessor test failure Code 4–4–4 Cause Cache test failure Error Messages Address mark not found Description Th[...]
-
Página 84
Alert! Security override Jumper is installed. Description The MFG_MODE jumper has been set and AMT Management features are disabled until it is removed. Attachment failed to respond Description The floppy or hard drive controller cannot send data to the associated drive. Bad command or file name Description Ensure that you have spelled the command [...]
-
Página 85
Decreasing available memory Description One or more memory modules may be faulty or improperly seated. Re- install the memory modules and, if necessary, replace them. Diskette drive 0 seek failure Description A cable may be loose or the computer configuration information may not match the hardware configuration. Diskette read failure Description Th[...]
-
Página 86
Hard-disk drive controller failure Description The hard drive failed initialization. Hard-disk drive failure Description The hard drive failed initialization. Hard-disk drive read failure Description The hard drive failed initialization. Invalid configuration information-please run SETUP program Description The computer configuration information do[...]
-
Página 87
Memory allocation error Description The software you are attempting to run is conflicting with the operating system, another program, or a utility. Memory data line failure at address, read value expecting value Description A memory module may be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them. Memory doubl[...]
-
Página 88
Memory tests terminated by keystroke Description A keystroke interrupted the memory test. No boot device available Description The computer cannot find the floppy disk or hard drive. No boot sector on hard-disk drive Description The computer configuration information in System Setup may be incorrect. No timer tick interrupt Description A chip on th[...]
-
Página 89
Read fault Description The operating system cannot read from the floppy or hard drive, the computer could not find a particular sector on the disk, or the requested sector is defective. Requested sector not found Description The operating system cannot read from the floppy or hard drive, the computer could not find a particular sector on the disk, [...]
-
Página 90
Time-of-day not set-please run the System Setup program Description The time or date stored in System Setup does not match the computer clock. Timer chip counter 2 failed Description A chip on the system board may be malfunctioning. Unexpected interrupt in protected mode Description The keyboard controller may be malfunctioning or a memory module m[...]
-
Página 91
Write fault on selected drive Description The operating system cannot write to the floppy or hard drive. X: is not accessible. The device is not ready Description The floppy drive cannot read the disk. Insert a floppy disk into the drive and try again. 91[...]
-
Página 92
92[...]
-
Página 93
21 Specifications Technical Specifications NOTE: Offerings may vary by region. For more information regarding the configuration of your computer, click Start (or Start in Windows XP) Help and Support, and then select the option to view information about your computer. Processor Processor type • Intel Core i3 series • Intel Core i5 series • In[...]
-
Página 94
Memory Desktop, Mini-Tower, Small Form Factor 16 GB Ultra Small Form Factor 8 GB Video Integrated • Intel HD Graphics (with Intel Celeron/Pentium-class CPU-GPU combo) • Intel HD Graphics 2000 (with Intel Core i3 DC 65 W and Intel Core i5/i7 QC vPRO 95 W-class CPU- GPU combo) Discrete PCI Express x16 graphics adapter Audio Integrated four Channe[...]
-
Página 95
Expansion Bus • x1-slot bidirectional speed – 500 MB/s • x16-slot bidirectional speed – 16 GB/s SATA: 1.5 Gbps, 3.0 Gbps, and 6 Gbps Cards PCI Mini-Tower up to one full-height card Desktop up to one low-profile card Small Form Factor none Ultra Small Form Factor none PCI Express x1 Mini-Tower up to three full-height cards Desktop up to thre[...]
-
Página 96
Drives Externally Accessible (5.25–inch drive bays) Mini-Tower two Desktop one Small Form Factor one slim optical drive bay Ultra Small Form Factor one slim optical drive bay Internally Accessible: 3.5–inch SATA drive bays Mini-Tower two Desktop one Small Form Factor one Ultra Small Form Factor none 2.5–inch SATA drive bays Mini-Tower two Des[...]
-
Página 97
External Connectors Mini-Tower, Desktop, Small Form Factor Front Panel: 4 Back Panel: 6 Ultra Small Form Factor Front Panel: 2 Back Panel: 5 Video 15-pin VGA connector, 20-pin DisplayPort connector NOTE: Available video connectors may vary based on the graphics card selected. System Board Connectors PCI 2.3 data width (maximum) — 32 bits Mini-Tow[...]
-
Página 98
System Board Connectors Mini PCI Express data width (maximum) — one PCI Express lane and one USB interface Mini-Tower, Desktop, Small Form Factor none Ultra Small Form Factor one 52-pin connector Serial ATA Mini-Tower four 7-pin connectors Desktop three 7-pin connectors Small Form Factor three 7-pin connectors Ultra Small Form Factor two 7-pin co[...]
-
Página 99
System Board Connectors Processor one 1155-pin connector Processor Fan one 5-pin connector Service mode jumper one 2-pin connector Password clear jumper one 2-pin connector RTC reset jumper one 2-pin connector Internal speaker one 5-pin connector Intruder connector one 3-pin connector Power connector Mini-Tower, Desktop, Small Form Factor one 24-pi[...]
-
Página 100
Controls and Lights see the Service Manual at support.dell.com/manuals. Back of the computer: Link integrity light on integrated network adapter Green — a good 10 Mbps connection exists between the network and the computer. Orange — a good 100 Mbps connection exists between the network and the computer. Yellow — a good 1000 Mbps connection ex[...]
-
Página 101
Power Wattage Maximum Heat Dissipation Voltage Mini-Tower 265 W 1390 BTU/hr 100 VAC to 240 VAC, 50 Hz to 60 Hz, 5.0 A Desktop 250 W 1312 BTU/hr 100 VAC to 240 VAC, 50 Hz to 60 Hz, 4.4 A Small Form Factor 240 W 1259 BTU/hr 100 VAC to 240 VAC, 50 Hz to 60 Hz, 3.6 A; 100 VAC to 240 VAC, 50 Hz to 60 Hz, 4.0 A Ultra Small Form Factor 200 W 758 BTU/hr 10[...]
-
Página 102
Environmental Storage 2.2 GRMS Maximum shock: Operating 40 G Storage 105 G Altitude: Operating –15.2 m to 3048 m (–50 ft to 10,000 ft) Storage –15.2 m to 10,668 m (–50 ft to 35,000 ft) Airborne contaminant level G1 or lower as defined by ANSI/ISA- S71.04-1985 102[...]
-
Página 103
22 Contacting Dell Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be avai[...]