Dell POWEREDGE 4300 manual
- Consulta online o descarga el manual de instrucciones
- 104 páginas
- 6.59 mb
Ir a la página of
manuales de instrucciones parecidos
-
Computer Hardware
Dell X51v
2 páginas 0.65 mb -
Computer Hardware
Dell 4100
82 páginas 2.1 mb -
Computer Hardware
Dell UCSB-900
115 páginas 4.48 mb -
Computer Hardware
Dell PR09S
98 páginas 1.79 mb -
Computer Hardware
Dell DCTA
148 páginas 3.76 mb -
Computer Hardware
Dell FE655W
10 páginas 0.16 mb -
Computer Hardware
Dell MD3620F
312 páginas 8.54 mb -
Computer Hardware
Dell R715
3 páginas 0.11 mb
Buen manual de instrucciones
Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Dell POWEREDGE 4300. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Dell POWEREDGE 4300 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.
¿Qué es un manual de instrucciones?
El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Dell POWEREDGE 4300 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.
Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Dell POWEREDGE 4300, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.
Entonces, ¿qué debe contener el manual de instrucciones perfecto?
Sobre todo, un manual de instrucciones Dell POWEREDGE 4300 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Dell POWEREDGE 4300
- nombre de fabricante y año de fabricación del dispositivo Dell POWEREDGE 4300
- condiciones de uso, configuración y mantenimiento del dispositivo Dell POWEREDGE 4300
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas
¿Por qué no leemos los manuales de instrucciones?
Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Dell POWEREDGE 4300 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Dell POWEREDGE 4300 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Dell en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Dell POWEREDGE 4300, como se suele hacer teniendo una versión en papel.
¿Por qué vale la pena leer los manuales de instrucciones?
Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Dell POWEREDGE 4300, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.
Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Dell POWEREDGE 4300. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.
Índice de manuales de instrucciones
-
Página 1
ZZZ GHOOFRP 'HOO 3RZHU(GJH 6VWHPV 6(59,&( 0$18$/[...]
-
Página 2
__________ ______ ____ Inf or mation in th is document is sub ject t o c hang e without noti ce. © 1998 Dell Comput er Cor por ation. All r ights r e serv ed. Reproduction in any manner whatsoever w ithout the written permission of Dell C omputer Corporation is strictly forbidden. T radem arks used in this text: Dell , the DELL logo, and P owerEdg[...]
-
Página 3
v &RQWHQWV &KDSWHU 6VWHP2YHUYLHZ Syst em Fe atu res . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Acces sing [...]
-
Página 4
vi &KDSWHU &RGHVDQG0HV VDJHV POST Beep Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Syst em Me ssag es . . . . . . . . .[...]
-
Página 5
vii $SSHQGL[$ 6VWHP6HWXS3URJUD P $ System Setup Scr eens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2 ,QGH[ )LJXUHV Figure 1-1 . Compu ter O rient ation . . [...]
-
Página 6
viii Figure 4-21. System Board Components . . . . . . . . . . . . . . . . . . . . . . . . 4-26 Figure 4-2 2. Expa nsion -Car d Acc ess Door . . . . . . . . . . . . . . . . . . . . . . . 4-27 Figure 4-2 3. Expa nsion Car d Rem oval . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 8 Figure 4-24. Inter i or Support Panel Removal . . . . . . . .[...]
-
Página 7
ix[...]
-
Página 8
x 5 HDG7KLV)LUVW A prerequi site f or using this manual t o ser vice Dell computer systems is a basic kno w l edge of IBM ® -compatible PCs and prior train i ng in IBM-compatibl e PC troublesh ooting tec hniques. In addition to i n f ormation pro vi ded in this manual and in the User ’ s Guide that came with the sy stem, Dell pro vides the[...]
-
Página 9
S ystem O v er vie w 1-1 &+$37(5 6VWHP2YHUYLHZ Dell ® P ow erEdge ® 4300 syst em s are f eat ure-ric h, enterp rise-class ser ver sys tems that use Intel ® P entium ® II microprocessor( s) with MMX ™ tec hnolog y and incorpora te high-perf ormance PCI and A GP local buses as w ell as the IS A expa nsion bus. T he P o w erEdge 43[...]
-
Página 10
1-2 Dell Po werEdg e 430 0 Sy stems Ser vice M anual sys tem; the upgrade kit from Dell cont ains the co rrect version for this sys tem. A secondary (L2) cac he of 51 2 KB of SRAM included within t he SEC car- tridge that contains the micropro cessor . 64-MB and 1 28-MB (unbuf f ered) main mem or y , upgradabl e to 51 2 MB , or upgradable t[...]
-
Página 11
S ystem O v er vie w 1-3 F o r a co mp le te l ist of sy stem f eat ures, se e “T ec hnic al Specif ication s” f ound late r in t hi s c ha pt er . F or inf ormation about installing the P ower Edge 430 0 sy stems in a rac k, see the Dell P ow erEdge 6300 and P ow erEdge 430 0 S ystems R ac k Inst al- lation Guide . When follo wing the text in [...]
-
Página 12
1-4 Dell Po werEdg e 430 0 Sy stems Ser vice M anual )L JXUH)URQW 3DQHO)HDWXUHV )L JXUH%DFN 3DQHO)HDWXUH V power switc h power indicat or drive acce ss indicator s (3) power -su pply st atus ind icator hard- dis k drive keyloc k disket t e dr ive CD-ROM dri ve fan/temperature st atu[...]
-
Página 13
S ystem O v er vie w 1-5 )L JXUH%DFN5LJKW6LGH,QWHUQDO9LHZ hard-dis k dri ve ba ys (6) extern al dr ive bays ( 4 ) SCSI backplane boar d system bo ar d tray latch PCI expansion card suppo rt panel micro pro cesso rs hard-d i sk dr ive cooling fan assem bly system boa rd fan s[...]
-
Página 14
1-6 Dell Po werEdg e 430 0 Sy stems Ser vice M anual $ FFHVVLQJWKH ,QWHULRURIWKH6VWHP T o access the SCS I bac kplane board or t he PSPB, r elease the sy stem-board tra y latc h at the bac k lo wer corn er of the t r ay (s ee Figure 1 - 5) and pull t he tray open to the first stop position (or ser vice posit ion ). NO TE: F rom the [...]
-
Página 15
S ystem O v er vie w 1-7 6V WHP 0HPRU S ystem memory has a minimum of 64 MB of 72-b it-wide, unbuf f ered memor y . T he sy stem memor y capaci t y can be e xpanded up to 1 GB b y using combina- tions of 64- and 1 28-MB unbuf fer ed SDRAM DIMMs or 256-MB registered SDRAM DIMMs. NO TE: DIMMs must be r a ted to r un at 1 00 MHz. T he sy s tem bo[...]
-
Página 16
1-8 Dell Po werEdg e 430 0 Sy stems Ser vice M anual $ GYDQFHG([S DQVLRQ6XEVVWHPV T he computer sy stem of f ers adv anced expansion s ubsystems tha t can support a mixture of traditional ISA expansion cards, P l u g a n d P l a y I S A e xp a n s i o n c a r d s, and PCI expa nsion c ards. The Resource Configura tion Ut ility ( RCU) incl[...]
-
Página 17
S ystem O v er vie w 1-9 6&6,&RQILJXUDWLRQ*XLGHOLQHV SCSI hard-di sk dri v es mus t be confi gur ed as follo w s: Disable t ermi nation on the driv e. Th e SCSI bac kplane board pr o vides termi- nation f or the SCSI bus. Set the SCSI ID on all dri ves to 0. All SCSI ID n umbers f or the dri ves are set b y the SCSI bac kpl[...]
-
Página 18
1-1 0 Dell P owerEdge 430 0 Sy stems Ser vi ce Man ual &$87,21 7 ZRRUPRUHSRZHU VXSSOLHVDQGD363% P XVWEHL Q VWDOOHG LQWKHVVWHPLI DQRIWKHIROO RZLQJVVWHPRSWLRQVDUHLQVWDOOHG A second micr oprocesso r T wo or mor e RAID contr oller host adapt er cards Mor e tha[...]
-
Página 19
S ystem O v er vie w 1-1 1 sys tem board, and fan rpm; an d supporting the SMB_ALER T protocol used b y the ser ver ma nagement bus. T he PSPB connects to the pow er suppli es through short harne sses that at ta c h to the bac k of the po w er supply cages. The PSPB is a t tac hed to the side wa ll of the computer b ehind the e xternal dr iv e cage[...]
-
Página 20
1-1 2 Dell P owerEdge 430 0 Sy stems Ser vi ce Man ual 3LQ$VVLJQPHQWVIRUWKH363%3 RZHU&RQQHFWRUV T he po wer -supply outpu t voltages c an be measured at the bac k (wire side) of the connectors without being disconn ected. In the f ollowing di agr a ms, v olt- ages f or the PSPB PWR x connectors are show n as mea sure [...]
-
Página 21
S ystem O v er vie w 1 -1 3 )L JXUH363%3RZHU&RQQHFWRU3:5 )L JXUH363%3RZHU&RQQHFWRU3:5 )L JXUH363%3RZHU&RQQHFWRU) ' 1 PLANAR_ID (gray) I2C_SCL_EX T (gray) I2C_SD A _EXT (gray) 2 34 567 +5 VDC (r ed) comm on ( bl ack) +3.3 VDC (ora n[...]
-
Página 22
1-1 4 Dell P owerEdge 430 0 Sy stems Ser vi ce Man ual )L JXUH363%3RZHU&RQQHFWRU+'B%3 1 common ( blac k) +1 2 VDC (yellow) common ( blac k) +1 2 VDC (yellow) 2 3456 78 +3.3 VD C (orang e) common ( blac k) +1 2 VDC (y ello w) common ( blac k) 9 NC_I 2C _ALRT# (gray) +5 V DC (red ) common ( blac k) +5 V DC[...]
-
Página 23
S ystem O v er vie w 1 -1 5 6VW HP%RD UG/DR XW Figure 1 -1 3 illustrates t he location of important sys tem board components. T he subsection s that f ollo w provide s er vice-rel ated inf ormation about the sy stem board components. )L J XUH 6VWHP%RDU G&RPSRQHQW V video con n e ct or (JVG A ) paral [...]
-
Página 24
1-1 6 Dell P owerEdge 430 0 Sy stems Ser vi ce Man ual 6&6,%DFNSODQH%RDUG/D RXWV Figure 1 -1 4 sho ws t he lo cati on of the con necto rs on the SCSI bac kplane board. )L JXUH6&6,%DF NSODQH%RDUG &$87,21 ,IRXUHPRYHSRZHUIURPWKH6&6,EDFNSODQHERDUG HLWKHU[...]
-
Página 25
S ystem O v er vie w 1-1 7 6VWHP%RDUG-XPS HUV Figure 1 -1 5 illustra tes the l ocation of the syst em board jumpers, and T able 1 -3 describes th e jumper set tings. )LJXUH6VWHP%RDUG-XPSHUV jump ered unj umper ed[...]
-
Página 26
1-18 Dell P owerEdge 430 0 Sy stems Ser vi ce Man ual ,QWHUUXSW$VVLJ QPHQWV T able 1 -4 li sts the default I RQ line a ssignments. 7 DEOH-XPSHU'HVFULSWLRQV -XPSH U 6HWWLQ JV CARDBIOS Not installed (def au lt) to allo w normal boot oper ati on from the sy stem BIOS. Install the jumper only to boot t he sy s- te[...]
-
Página 27
S ystem O v er vie w 1 -1 9 '0$&KDQQHO$VVLJQPHQWV T able 1 -5 lists the def ault DMA c hannel assignments. IRQ1 1 A vailable IRQ1 2 Used by the PS/ 2 mouse port unless mous e is disabl ed in Sy stem Setup progr am IRQ1 3 Used b y the math copr ocessor IRQ1 4 A vailable IRQ1 5 Used b y emb edded ser ver -management functions 7 DEOH[...]
-
Página 28
1-20 Dell P owerEdge 430 0 Sy stems Ser vi ce Man ual 7 HFKQLFDO6SHFLILFDWLRQV T able 1 -6 lists detailed tec hnical specif ications. 7 DE OH7 HFKQLFDO6SHFLILFD WLRQV 0LFURS URFH VVRU Microproces sor t ype . . . . . . one or t w o Intel P entiu m II microprocessors Microproces sor speed . . . . . 350 or 40[...]
-
Página 29
S ystem O v er vie w 1- 21 0HPRU FRQ WLQXHG BIOS address . . . . . . . . . . . . F00 0:00 00h–F0 00:FFFFh Exter n al cac he . . . . . . . . . . . none ,QWHJUDWHG6&6,&RQW UROOHUV T ypes . . . . . . . . . . . . . . . . . . Adapt ec AIC-7890 Ultra2/L VD (F ast-40) con- troller , w ith in tegrated 68-pin SCSI con nector on th[...]
-
Página 30
1-22 Dell P owerEdge 430 0 Sy stems Ser vi ce Man ual &RQWUROVD QG,QGLFDWRUV P ow er control . . . . . . . . . . . . push-but ton behind driv e d oor on front panel P ow er indicator . . . . . . . . . . green LED behind driv e door on front panel F an/temperat ure status indicat or . . . . . . . . . . . . . . . . green LED on front panel [...]
-
Página 31
S ystem O v er vie w 1- 23 (QYLURQ PHQWDO T emperature: Opera ting . . . . . . . . . . . . 1 0 ° to 35 ° C ( 50 ° to 9 5 ° F) Stor age . . . . . . . . . . . . . – 40 ° to 65 ° C (–40 ° to 1 49 ° F) Rel a t ive humidity . . . . . . . . . . . . . 8% to 80 % (noncondensing) Maximum vibrati on: Opera ting . . . . . . . . . . . . 0.25 G at 3[...]
-
Página 32
1-24 Dell P owerEdge 430 0 Sy stems Ser vi ce Man ual[...]
-
Página 33
Basic T r oublesho otin g 2-1 &+$37(5 %DVLF 7 URXEOHVKRRWLQJ T his c hapter descr ibes basi c troubles hooting procedures t hat can he lp you diagnose a computer sy stem problem. T hese procedures can of ten re veal the source of a problem or in dicate the corre ct starti ng po int f or troubleshoot ing the sy stem. F or a brief e x pl[...]
-
Página 34
2-2 Dell Po werEdg e 430 0 Sy stems Ser vice M anual 3. Obser ve the use r to dete r mine if he or she is making an e rror , suc h as typ- ing an incor re ct key combina tion or entering a command incorr e ct ly . Is the problem a resul t of user er ror? Ye s . Instr uct the user in the proper pro cedur e, or direct him or her to the appropria te u[...]
-
Página 35
Basic T r oublesho otin g 2-3 7 . Inspect all e xternal monitor contr ol s for any ob vious damage or improper set tings. F or proper set tings of the video monitor control s, see the documentation f or the monitor . 8. Inspect the k eyboard to ensur e that no ke ys are sti c king. If one or more k eys are st ic king, it may be necessar y to replac[...]
-
Página 36
2-4 Dell Po werEdg e 430 0 Sy stems Ser vice M anual 3. W atc h the Num Loc k, Caps Loc k, and Scroll L oc k indicat ors on the upper - right corner of the ke yboard. Af ter all t hree indi cators flash momentarily , and f ollowing a long pause (appro ximately 30 seconds), the Num Loc k indi- cator s hould light up a nd remain on (unless the Num Lo[...]
-
Página 37
Basic T r oublesho otin g 2-5 ,QWHUQDO9L VXDO,QVSHFWLRQ :$51,1* 7KH SRZ HU VXSSOLHV LQ WKLV FRPSXWHU VVWHP SURGXFH KLJK YROWDJ HVDQGH QHUJKD]DUGV ZKLFKFDQFDXVHE RGLO KDUP2QO WUDLQHGVHUYLFHW HFKQLFLDQVDUHDXWKRUL]HGWRUHPRYHWKHFRPSXWHU FRYHUDQ[...]
-
Página 38
2-6 Dell Po werEdg e 430 0 Sy stems Ser vice M anual If y ou need to reseat an e xpansion card, remo v e the card as described in “Expansion Car ds” in Chapter 4, and then r einsert the card i n its connector and carefu ll y push it in until fully seated . 4. V e rify t hat a ll j umpers are set correct ly . F or infor m ation about jumper set [...]
-
Página 39
Basic T r oublesho otin g 2-7 Starting the diagnosti cs causes the Dell logo screen to appear on the monito r screen, f ollow ed by a message indicating t hat the diagnostics is loading. B ef ore the diagnostics loa ds, a program tests the portion of main memor y (RAM) requi red f or loading th e diagnostics. If a RAM error is detect ed, a mes- sag[...]
-
Página 40
2-8 Dell Po werEdg e 430 0 Sy stems Ser vice M anual[...]
-
Página 41
Codes a nd Me ssages 3-1 &+$37(5 &RGHVDQG0HVVDJHV T hi s c hapter descr ibe s beep codes, sy stem messages, aler t messages from the Dell OpenManage Hardw are Instr umentation P ac kage (HIP) application program, and SCSI hard-disk dri ve indicator codes that can occur during t he POS T or duri ng normal system operation. If a f[...]
-
Página 42
3-2 Dell Po werEdg e 430 0 Sy stems Ser vice M anual 7 DEOH6VWHP%HHS&RGHV &RGH &DXVH &RUUHFWLYH$FWL RQ 1- 1- 3 N V R A M w r i t e / r e a d fa i l u r e Replac e the sy ste m board. 1 -1 -4 BIOS c hec ksum fai l ur e Th i s f at al err or usually requir es that you reflash th e BIOS fi rmware . If the pr[...]
-
Página 43
Codes a nd Me ssages 3-3 3-1 -1 3-1 -2 3-1 -3 3-1 -4 Sla ve DMA-register fa i l u r e Master DMA- register f a ilure Master inter rupt- mask register fail ure Sl ave in te rru pt -m a sk register f a ilure Replac e the sy ste m board . 3-2-4 K eyboard-cont rol ler test failu re Chec k the k eyboar d cable and con- nector f or proper connection. If [...]
-
Página 44
3-4 Dell Po werEdg e 430 0 Sy stems Ser vice M anual 4-4-1 4-4-2 Super I/O cont ro ller fa i l u r e P arall e l-p o r t te s t f ailure (def ectiv e sys tem board) Replac e the sy ste m board . 4-4-3 4-4-4 Math cop rocessor f ailure (def ectiv e microproces sor) Cac he test failure (def ectiv e microproces sor) Replac e the microproc essor . 7 DEO[...]
-
Página 45
Codes a nd Me ssages 3-5 6VWH P0HVVDJHV T able 3-2 lists (in alphabet ical order) sy stem mes sages that can appea r on the monitor s creen. T hese messages can help you f ind the source of a probl em. Some of thes e messages indicate fatal errors. When a fatal er ror occurs, the sys tem cannot usually be rebo oted unt il an appropri ate hardwa[...]
-
Página 46
3-6 Dell Po werEdg e 430 0 Sy stems Ser vice M anual 'DWDHUURU F ault y disk et te, disk et te drive, or hard -di sk drive R epl ace the disket te, dis- ke t te driv e, or hard-disk driv e. 'HFUHDVLQJ DYDLODEOH PHPRU F aulty or improperly seated DIMM R emo ve and reseat the DIMMs. If t he prob lem persists , repl ace the DIMMs. [...]
-
Página 47
Codes a nd Me ssages 3-7 (PEHGGHG VHUYHU PDQDJHPHQW HUURU (PEHGGHG VHUYHU PDQDJHPHQW LV QRWSUHVHQW Embedded ser ver management memor y may be tempo rarily corr upted Shut do wn the sys t em to clear t he memor y , and then re start the sy stem. If the problem persi st s, disconnect al l pow er cables from the sy stem for at [...]
-
Página 48
3-8 Dell Po werEdg e 430 0 Sy stems Ser vice M anual ,2SDULW LQWHUUXSWDW DGGUHVV Improperly installed or f ault y expansion card R e i nst all the e xpansion card(s). If the pr oblem persists , replace the e xpansion ca rd(s). .HERDUG FORFNOLQH IDLOXUH .HERDUG IDLOXUH L oose or improperly connecte d ke yboard cable con[...]
-
Página 49
Codes a nd Me ssages 3-9 0HPRU DGGUHVVOLQH IDLOXUHDW DGGUHVV UHDG YDOXH H[SHFW LQJ YDOXH 0HPRUGRXEOH ZRUGORJLF IDLO XUHDW DGGUHVV UHDG YDOXH H[SHFW LQJ YDOXH 0HPRURGG HYHQORJLF IDLOXUHDW DGGUHVV UHDG YDOXH H[SHFW LQJ YDOXH 0HPRUZULWH [...]
-
Página 50
3-1 0 Dell P owerEdge 430 0 Sy stems Ser vice Man ual 1RERRW VHFWRURQ KDUGGLVN GULYH Incor r ect configura- tion set tings in S ystem Setu p program or no operating system on hard -di sk drive Chec k the hard-disk driv e configura ti on set t ings in the S ystem Setup program. 1R WLPHU WLFN LQWHUUXSW Def ective sy stem bo[...]
-
Página 51
Codes a nd Me ssages 3-1 1 3URFHVVRURU WHUPLQDWRU FDUGQRW LQVWDOOHG No microprocessor or termi nator car d installed in o ne of the micro processor guide brac ket assemblies Ensure that eac h micro- processor guid e brac ke t assembly has either a termina t or card or a microprocess or installed. See Chapter 8, “Install- ing S y[...]
-
Página 52
3-1 2 Dell P owerEdge 430 0 Sy stems Ser vice Man ual 7LPHRIGD QRWVHW Incorrec t Time or Da te set tings or def ective sy stem bat ter y Chec k the Time and Date set t ings. If th e problem pers is ts, replace t he bat ter y . 7LPHUFKLS FRXQWHU IDLOHG Def ectiv e syst em board R eplace the system board. 8QH[SHFWHG LQW[...]
-
Página 53
Codes a nd Me ssages 3-1 3 $OHUW0HVVDJHV) URP'HOO 2SHQ0DQDJH+,3 T he Dell OpenManage HIP ser ver -management application pr ogram generates alert messages that appear in the Simple Network Management P r otocol (SNMP) trap l og file. T o see the trap log, select an y enterprise unde r the SNMP trap l og icon. Alert log messages [...]
-
Página 54
3-1 4 Dell P owerEdge 430 0 Sy stems Ser vice Man ual &XUUHQW VHQVRUZDUQ LQJGHWHFWHG T he sy stem pow er consumption is ex ceeding po wer supply c apacity . T he po w er supply name is provi ded . V eri fy th at al l of the e xpansio n cards i n the sy stem are func- tioning prop erly . V eri fy tha t the load requirements of the ha[...]
-
Página 55
Codes a nd Me ssages 3-1 5 3RZHUVXSSO GHWHFWHGD IDLOXUH In sy stems with optional redundant po w er su pplies, t he po w er su pply sen sor detected a failure in one of the po w er supplies . If possi ble, the po wer supply num b e r is provid ed . Chec k to see whether the po wer supply indic ators sho w a po wer sup- ply f ailure. Ma[...]
-
Página 56
3-1 6 Dell P owerEdge 430 0 Sy stems Ser vice Man ual 7HPSHUDWXUH VHQVRU ZDUQLQJ GHWHFWHG A temperat ure probe on the b ac kplane board, system board , or driv e carrier in the specified ser ver has e x ceeded its temper- at ure warning range . If possible, the c has- sis number and probe number are pro v ided. Mak e sure the fan thresho l[...]
-
Página 57
Codes a nd Me ssages 3-1 7 6&6,+DUG'LV N'ULYH,QGL FDWRU&RGHV T hr ee indicator lig hts in eac h SCSI hard-dis k driv e carr i er pro vide informat ion on the stat us of the SCSI hard- disk driv es ( see Figure 3- 1). T he SCSI ba c k plane firmw are contro l s the driv e online and drive f ailure indicators. )LJXUH?[...]
-
Página 58
3-18 Dell P owerEdge 430 0 Sy stems Ser vice Man ual 7 DEOH6&6,+DUG'LVN' ULYH,QGLFDWRU3 DWWHUQV &RQG LWLR Q ,QGL FDWRU 3DWWHUQ Identif y driv e All three dri ve st at us indicators bli nk simultaneously . Driv e being prepared for removal T he three driv e st atus i ndicators flash sequential ly[...]
-
Página 59
Remo ving an d Replacing Parts 4-1 &+$37(5 5 HP RYLQJDQG5 HSODFLQJ3 D UWV T hi s c hapter pro vides procedures f or removing the components, assemblies, and subassemblies in the computer . Unless othe r wis e noted, eac h procedure is based on the f o l lo w ing assumption s: Y ou hav e performed the steps in “P recauti[...]
-
Página 60
4-2 Dell Po werEdg e 430 0 Sy stems Ser vice M anual 3 UHFDXWLRQDU0HDVXUHV B efor e y ou perf orm an y of the procedu res in this c hapter , take a f ew moments to read the foll owing w arning f or y our personal sa fety and t o pre vent damage to the computer sy stem from ESD . :$51,1* )25<2853(5621$/6$)(7 <$1'3[...]
-
Página 61
Remo ving an d Replacing Parts 4-3 &RPSXWHU&RYHU )LJXUH&R PSXWHU&RYHU5H PRYDO T o remov e the computer c ov er , f ollo w these step s: 1 . T urn the ke yloc k on the bac k edge of the cov er cloc kwise to the unloc ked positio n (see Figu re 4-1 ). 2. Slide the co v er a half-i nc h (about a centim ete[...]
-
Página 62
4-4 Dell Po werEdg e 430 0 Sy stems Ser vice M anual )U R Q W % H ] H O ) LJXUH ) URQW %H] HO5 HPRYDO T o remo ve the front bez el, f o l low these steps: 1 . Remo ve the com puter cov er . 2. With your finger ti ps, gently pr y loose the f our t abs along the right edge of the bez el, and disengage the three clips on[...]
-
Página 63
Remo ving an d Replacing Parts 4-5 &RQWURO3 DQHO$VVHPEO )LJXUH&RQW URO3DQHO$VV HPEO5HP RYDO T o remo ve the control panel ass embly , foll o w these steps: 1 . Disconnect the ribbon cable f rom its c onnector on the lef t side of the con- trol panel assembly (see Figure 4-3 ) . 2. L oosen the thumbscre [...]
-
Página 64
4-6 Dell Po werEdg e 430 0 Sy stems Ser vice M anual 'ULY HV Figure 4-4 sho ws an e x ample of driv e hardware that can be installed in the computer . R efe r to this figure when you perf orm any of the procedure s in the f ollowing subsections . )L J XUH' ULYH+DUGZDUH disket te-drive inte rface connect or (FLOP PY[...]
-
Página 65
Remo ving an d Replacing Parts 4-7 ([W HUQ DOO$FFHVV LEOH' ULYHV T he c hassis provides t hree bay s f or 5.25-inc h external ly accessible drives and a bay dedicated to a 3.5-i nc h disk et te drive. ) URQW 3 DQHO,QVHUWV )LJXUH)URQW 3DQHO,QVHUWV T o remo ve the front-panel ins ert that cov ers an unused[...]
-
Página 66
4-8 Dell Po werEdg e 430 0 Sy stems Ser vice M anual T o remov e a close-out panel, pr y the bot tom of the panel outwa rd at the center until y ou can unhook a securing t ab at one end and work out the other end. When installing close-out panels , install 1 .6-inc h panels from the bot tom up. Make s ure the o ve rlap lip is at the bot tom and p r[...]
-
Página 67
Remo ving an d Replacing Parts 4-9 DQ G ,QFK'UL YHV )L JXUH([WHUQDOO$ FFHVVLEOH'ULYH5 HPRY DO T o remov e a 3.5-inc h or 5.25 -inc h driv e assembly f rom one of t he e xternally accessibl e driv e bay s, fol lo w these steps : 1 . Press the two dri ve release tabs tow ard[...]
-
Página 68
4-1 0 Dell P owerEdge 430 0 Sy stems Ser vice Man ual 3. Remo ve the drive-mounting r ails from the drive (se e Figure 4-7). )L JXUH'ULYH0RXQWLQJ5DLO5 HPRYDO([DPSOH 4. If the driv e is a SCSI dr iv e, re cord th e set ting of the SCSI address jumpers and SCSI bus termination jumper . 5. If the driv e is a[...]
-
Página 69
Remo ving an d Replacing Parts 4-1 1 +DUG'LVN'ULYHVLQ([WHUQDO%D )LJXUH+DUG'LVN'ULYHVLQ ([ WHUQDO%D T wo SCSI hard-disk driv es can be inst alled in the e xternal ba y usi ng the exter - nal driv e-ba y i nsert (see Figur e 4-8). Driv es mate to a smal l bac kplane board on the[...]
-
Página 70
4-1 2 Dell P owerEdge 430 0 Sy stems Ser vice Man ual +DUG'LVN 'ULYHV )LJXUH+DUG'LVN'ULYH5 HPRY DO R e mo ve a SCSI hard- d is k driv e from an internal dr iv e bay as f ollo w s. &$87,21 +RWSOXJJDEOHGULYHLQVWDOO D WLRQDQGUHPRYDOLV QRW VXS SRUWHGIRUVV[...]
-
Página 71
Remo ving an d Replacing Parts 4-1 3 5. R emo ve t he drive f rom its carrier b y remo ving the four screws (two on eac h sid e) th at s ecur e it in t he c arrier . B ef ore installing a new driv e, set all jumpers and remov e termination fr om the driv e. When installing the driv e, raise the carri er handle until it latc hes to ensure tha t the [...]
-
Página 72
4-1 4 Dell P owerEdge 430 0 Sy stems Ser vice Man ual 6&6,%DFNSODQH%RDUG )L JXUH 6&6,%DF NSODQH%RDU G5HPRYD O T o remov e a SCSI bac kplane board, f ollo w these steps: 1 . Slide the syst em board tra y out to the ser vice position. See “ Accessing the In terior of the Sy stem” in Chapter 1 for in [...]
-
Página 73
Remo ving an d Replacing Parts 4-1 5 &$87,21 ,IRXUHPRYHSRZHUIURPWKH6&6,EDFNSODQHERDUG HLWKHUEUHPRYLQJW K HSRZHUFDEOHRUGXULQJUHSODFHPHQW RIWKH VVWHPERDUGEDWWHURXPDQHHGWRUHIODVKWKHVVWHP·V ILUPZDUH 7KHRULJLQDOIL UPZDUH?[...]
-
Página 74
4-1 6 Dell P owerEdge 430 0 Sy stems Ser vice Man ual 6VWHP3 RZHU6XSSO )L JXUH 3 RZHU6 XSSO 5HP RYDO :$51,1* )RUVVWHPV ZLWKQRQUHGXQGD QWSRZHUVXSSOLHVWXUQRII SRZHUWRWKHVVWHPEHIRUHUHPRYLQJW KHVVWHPSRZHUVXSSOLHV T o remov e a po w er supply , f ol[...]
-
Página 75
Remo ving an d Replacing Parts 4-1 7 6VWH P3 RZHU6XSSODQG363%8SJUDGH )L JXUH 3RZ HU& D EOH &RQ QHFWLRQV ³6LQJOH 3RZ HU6XS SO :$51,1* )RUVVWHPV ZLWKQRQUHGXQGD QWSRZHUVXSSOLHVWXUQRII SRZHUWRWKHVVWHPEHIRUHUHPRYLQJW K HVVWHP[...]
-
Página 76
4-18 Dell P owerEdge 430 0 Sy stems Ser vice Man ual 4. R emo ve t he sc rew securing t he PSPB tray to the c hassis (see Figure 4-1 3). )L JXUH363%7 UD/RFDWLRQLQW KH6VWHP&KDVVLV 5. R emo ve t he PSPB tray from the c hassis. If necessary , temporarily disconnect the SCSI i nterf ace cables from the sy[...]
-
Página 77
Remo ving an d Replacing Parts 4-1 9 )L JXUH363%,QVWDOODWLRQRQWKH 363%7 UD 9. Connect the three Y -cables to the corres ponding thre e pair s of connectors on the PSPB . 1 0. R einstall the PSPB tray in th e c hassis. Secure the tra y with the screw y ou remov ed in step 4. PSPB PSPB tray captive s crew[...]
-
Página 78
4-20 Dell P owerEdge 430 0 Sy stems Ser vice Man ual 1 1 . At t ac h the four -conductor po wer cable to the e xternal-dri v e pow er cable connector (l abeled “FD”) on the PSPB (see Figure 1 -7), and to th e driv es in the e xternal driv e bay s (see Fig ure 4-1 5). )L JXUH3RZHU&DEOH&RQQHFW LRQV³0XO[...]
-
Página 79
Remo ving an d Replacing Parts 4-21 3 RZHU 6XSSO3 DUDOOHOLQJ%RDUG )LJXUH3RZHU6XSSO3DUDOOHOLQJ%RDUG5HPRYD O R emo ve t he PSPB as f ollows: 1 . Slide the syst em board tra y out to the ser vice position. See “ Accessing the In terior of the Sy stem” in Chapter 1 for in structi ons. 2. Disconnect al [...]
-
Página 80
4-22 Dell P owerEdge 430 0 Sy stems Ser vice Man ual 6VWHP&RROLQJ)DQV ) LJXUH 6VW HP&RRO LQJ )DQV Fiv e cooling fans are in stalled in the Dell P ow erEdge 4300 c ha ssis. The driv e f an assembly consi sts of three f ans mounted in a carrier abo ve th e hard-dis k driv e enclo sure; the s ystem-[...]
-
Página 81
Remo ving an d Replacing Parts 4-23 7KUHH )DQ$VVHPEO )LJXUH7KUHH)DQ$VVHPE O 5HPRYDO T he driv e fan assembly is hot- pluggable a nd can be quic kly replaced whil e the sys t em is r unning. :$51,1*, IUHSO D FLQJ WKLVDVVHPE OZKL OHWKHV VWHPLVU XQQLQJ PDN HVXUH[...]
-
Página 82
4-24 Dell P owerEdge 430 0 Sy stems Ser vice Man ual )D Q3 RZHU &DEOH%XQG OH NO TE: Thi s is not a hot-pluggable pro cedure. T o remov e the po wer cable bund le that mates to the bo t tom of the driv e fan assembly , follo w these steps: 1 . Remo ve the dri ve f an assembly . 2. Squeez e the ends of the po wer -cable bundle connect o[...]
-
Página 83
Remo ving an d Replacing Parts 4-25 6VWHP% RDUG)DQV )L JXUH 6VWHP%RDUG) D Q 5HPRYDO T he system board f ans are hot-p luggable and can be quic kly replaced whil e the sys t em is r unning. :$51,1*, IUHSO D FLQJ WKLVDVVHPE OZKL OHWKHV VWHPLVU XQQLQJ P D NH V X U[...]
-
Página 84
4-26 Dell P owerEdge 430 0 Sy stems Ser vice Man ual 6VWHP%RDUG&RPSRQHQWV T he subse ctions that fol lo w contain procedures f or removing sy stem board components. R ef er to Figure 4-21 f or the location of components. )L JXUH 6VWHP %RDU G&RPSR QHQ WV video con necto r ( JVG A) parallel port co[...]
-
Página 85
Remo ving an d Replacing Parts 4-27 ([SDQVLRQ&DUGV )L JXUH([SDQVLRQ&DUG$ FFHVV'RRU T o remov e an expa nsion card, f ollow these steps: 1 . Unloc k the k e yloc k, remov e the k e y , and then tur n the k e yloc k to the access-door release position (see Figur e 4-22). 2. Squeez e the dual latc hes o[...]
-
Página 86
4-28 Dell P owerEdge 430 0 Sy stems Ser vice Man ual 4. F or the card you w ant to remo ve, press in and hold the clip on the bac k of the computer . At the same time, from in sid e the computer , press the cur ve d rele ase tab in the middle of the e xpansion-card la tc h to w ard the bot tom of the ca rd. Af ter the release t ab clic ks into th e[...]
-
Página 87
Remo ving an d Replacing Parts 4-29 ,QWHULRU 6XSSRUW3DQHO )L JXUH,Q WHULRU6XSSRUW3 DQHO5HPRY DO T o access the micro processors or the memor y module, you must remo v e the inte ri or support panel as f ollo w s: 1 . Loosen the thumbscr ews on the lef t side of the panel (see Figure 4-2 4). 2. R otate the pane[...]
-
Página 88
4-30 Dell P owerEdge 430 0 Sy stems Ser vice Man ual ',0 0V )L JXUH',005HPRYDO T o remov e a DIMM, f ollow thes e steps: 1 . Remo ve the interior support p anel. 2. P ress outwar d on the s oc ket’ s securing clips until the DIMM is released from the soc ket (see Figure 4-25) . T hen, lif t the DIMM aw ay from[...]
-
Página 89
Remo ving an d Replacing Parts 4-31 6(&&DUWULGJ HDQG+HD W6LQN$VVHPEO )L JXUH6(& &DUWULGJH5 HOHDVH/DWFK HV T o remov e an SEC cartridg e and heat si nk assembly , fol low these steps. :$51,1*7KH6(&FDUWULGJHDQGKHDWVLQN DVVHPEOFDQJHW H [WUHPHO ?[...]
-
Página 90
4-32 Dell P owerEdge 430 0 Sy stems Ser vice Man ual 2. R emo ve the two retenti on pins from the SEC cartridge and heat sink assembly ( see Figure 4-28 ). )L JXUH6(&&DUWULGJHDQG+HDW6LQN5 HPRYDO 3. P ul l the SEC cartridge str ai ght up out of the connector and guide brac ket assembly ( s ome force[...]
-
Página 91
Remo ving an d Replacing Parts 4-33 7 H UPLQ DWRU &DUG )L J XUH 7 HUPLQ DWRU&DUG5HPRYDO T o remov e a term inator c ard, fo llo w these steps: 1 . Remo ve the retaining clip from the guide brac ke t assembly . Using the t humb and f orefi nger of eac h hand, pinc h the tabs at eac h end of the clip (se e Fig[...]
-
Página 92
4-34 Dell P owerEdge 430 0 Sy stems Ser vice Man ual 6VWHP%DWWHU )L JXUH 6VWHP%DW WHU5H PRYDO T o remo ve the sys tem bat ter y , f ollo w these steps: 1 . Bef ore t ur ning of f the sy stem, enter the S ystem Set up program i f possible and mak e a printed copy of the S ystem Set up screens (see A[...]
-
Página 93
Remo ving an d Replacing Parts 4-35 6VWHP%RD UG$VVHPEO )L JXUH6VWHP%RDUG$V VHPEO5 HPRYDO T he sy stem board assembly consists of the sy stem board and a mounting plate. T he system board is held to the mounti ng plate with screws and mount- ing clips. T o remo ve the syst em board assembly , f ollow thes e[...]
-
Página 94
4-36 Dell P owerEdge 430 0 Sy stems Ser vice Man ual 6VW HP%RD UG )L JXUH6VWHP%RDU G5HPRYDO T o remov e the system board from the sy stem board tra y , perf orm the foll owing steps. (If y ou are replacing the sy stem board , you ma y want to remo ve the e xpa nsion cards, memor y , processors, and processor guide[...]
-
Página 95
Remo ving an d Replacing Parts 4-37 *XLGH%UDFNHW$VVHPEO )L J XUH *XLGH%UDFNH W$VVHPEO5 HPRYDO T o remov e the guide br ac ket assembly , f ollo w these steps: 1 . Remo ve the sy stem board assembly . 2. R emo v e an y te rminator card, if ne cessar y . 3. R emo ve an y SEC cartr idge and heat sink a[...]
-
Página 96
4-38 Dell P owerEdge 430 0 Sy stems Ser vice Man ual[...]
-
Página 97
S ystem Setup Program A-1 $33(1',;$ 6VWHP6HWXS3 URJUDP T hi s appendix descri bes the S y stem Setup pro gram, whic h is used to c hange the sy stem configuration inf ormation stored in NVRAM on the syst em board. F or in-depth informati on, ref er to Chapte r 4, “Usi ng the S ys tem Set up Pro- gram” in the Dell P ow er Edge 430[...]
-
Página 98
A-2 Dell Po werEdge 43 0 0 Sy s tems Ser vi ce Man ual 6VWH P6HWXS6FUHHQV Figure A-1 ill ustra tes t he S y stem Setup program s creens, and T able A-1 briefl y describes eac h set up option. )LJXUH$6VWHP6HWXS6FUHH Q V ,QWHJUDWHG'HYLFHV 0RXVH 6HULDO3RUW 6HULDO3RUW 3DUDOOHO3RUW[...]
-
Página 99
S ystem Setup Program A-3 7 DEOH$6VWHP6HWXS2SWLRQV 2SWLRQ )XQFWLRQ Time R esets time on computer ’ s internal cloc k. Da te R esets date o n computer ’ s internal calendar . Disk ett e Dr ive A Disk ett e Dr ive B Identi fi es type of disk et te driv es installed. T ape driv es are not reflected. Reserv ed Memory Al low[...]
-
Página 100
A-4 Dell Po werEdge 43 0 0 Sy s tems Ser vi ce Man ual Ser ial P ort 1 Ser ial P ort 2 Configur es sy stem’ s built-in ser ial port s. Th ese options ma y be set to Au t o (defaul t) to automatic ally configure a port, to a specif ic designat ion ( COM1 [3F8h] or COM3 [3E8h] f or Ser i al P ort 1 ; COM2 [2F8h] or CO M4 [2E8h] fo r Ser ial P ort 2[...]
-
Página 101
Index 1 ,QGH [ % back-p anel features, 1-4 battery removal, 4-34 beep cod es about, 3- 1 system, li st of, 3-2 bezel remo val, 4 -4 boot routin e observing when tro ubles hooting, 2-3 built- in SCSI hos t adapters, 1-2 , 1-8 & cables SCSI, 1-9 CD-ROM drive locati on, 1-4, 4-6 removal, 4-9, 4-10 computer back/ri ght side internal view, 1-5 back-[...]
-
Página 102
2 Dell P ow erEdg e 430 0 Sy stems Se r vi ce Man ual drives See also CD-ROM drive, diskett e drive, SCSI devi ces external ly accessible dr ive bays, 1-4 locati on of, 4- 6 SCSI confi guration guidelines , 1-9 terminati on, 1-9 ( ECC, 1-7 expansion car ds about, 1- 8 ISA, 1-8 PCI, 1-8 removal , 4-28 slots, 1- 8 expansion subsys tem, 1-8 external v[...]
-
Página 103
Index 3 microproces sor (continued) removal, 4-31 speeds, 1- 1 terminato r cartridge, 4-33 upgrade kit, 1-2 mouse connecto r loc ation, 1-4 3 parall el port connecto r loc ation, 1-4 PCI expansion cards about, 1- 8 Plug and Play ISA expansion car ds, 1-8 POST beep codes, 3-1 power indicat or, 1-4 power supply removal, 4-16 , 4-17, 4-20 power switch[...]
-
Página 104
4 Dell P ow erEdg e 430 0 Sy stems Se r vi ce Man ual troublesh ooting boot routin e, observing, 2-3 external visual in spect ion, 2-2 initi al user contact, 2-1 inte rnal vi sual inspec tion, 2-5 8 user cont act, initial , 2-1 9 video subsystem, 1-2 video connector loca tion, 1-4 video cont roller, integra ted, 1-8 visual in spection exte rnal, 2-[...]