Denon AVR-X5200W manual

. AVR-X5200W INTEGRATED NETWORK AV RECEIVER Owner’s Manual You can print more than one page of a PDF onto a single sheet of paper. Contents Connections Playback Settings Tips Appendix 1 Front panel Display Rear panel Remote Index[...]

Accessories 8 Inserting the batteries 9 Operating range of the remote control unit 9 Features 10 High quality sound 10 High performance 11 Easy operation 14 Part names and functions 15 Front panel 15 Display 19 Rear panel 21 Remote control unit 24 Connections Connecting speakers 28 Speaker installation 28 Speaker connection 35 Speaker configuration[...]

Playback Basic operation 75 Turning the power on 75 Selecting the input source 75 Adjusting the volume 76 Turning off the sound temporarily (Muting) 76 Playback a DVD player/Blu-ray Disc player 76 Playing an iPod 77 Listening to music on an iPod 78 iPod Browse Mode settings 79 Performing repeat playback 81 Performing random playback 81 Playing a US[...]

Viewing photographs on the Flickr site 109 Viewing photographs shared by particular users 110 Viewing all photographs on Flickr 112 AirPlay function 113 Playing songs from your iPhone, iPod touch or iPad 114 Playing iTunes music with this unit 114 Selecting multiple speakers (devices) 115 Perform iTunes playback operations with the remote control u[...]

Selecting a sound mode 128 Selecting a sound mode 129 Direct playback 130 Pure Direct playback 130 Auto surround playback 131 HDMI control function 143 Setting procedure 143 Sleep timer function 144 Using the sleep timer 145 Quick select plus function 146 Calling up the settings 147 Changing the settings 148 Web control function 149 Controlling the[...]

Inputs 190 Input Assign 190 Source Rename 192 Hide Sources 192 Source Level 192 Input Select 193 Speakers 194 Audyssey ® Setup 194 Procedure for speaker settings (Audyssey ® Setup) 196 Error messages 202 Retrieving Audyssey ® Setup settings 204 Manual Setup 205 Amp Assign 205 Speaker Config. 220 Distances 224 Levels 225 Crossovers 226 Bass 227 F[...]

Operating external devices with the remote control unit 249 Registering preset codes 250 Operating devices 252 Initializing registered preset codes 255 Specifying the operating zone with the remote control 255 Resetting the remote control unit 255 Tips Tips 257 Troubleshooting 259 Resetting factory settings 277 Appendix About HDMI 278 Video convers[...]

Thank you for purchasing this Denon product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories Check that the following parts are supplied with the product. . . . . . Quick Start Guide CD-ROM (Owner’s Manual) Safety Inst[...]

Inserting the batteries 1 Slide the rear cover off the remote control unit in the arrow direction. . 2 Insert two batteries correctly into the battery compartment as indicated. . R6P/AA batteries 3 Put the rear cover back on. NOTE 0 To prevent damage or leakage of battery fluid: 0 Do not use a new battery together with an old one. 0 Do not use two [...]

Features High quality sound 0 With discrete circuit technology, the power amplifier provides identical quality for all 9-channels (175 Watts x 9-channels) For optimum realism and stunning dynamic range, the power amplifier section features discrete power devices (not integrated circuitry). By using high current, high power discrete power devices, t[...]

High performance 0 4K 60Hz input/output supported . 4K 60p 4:4:4 4K 60p 4:4:4 When 4K Ultra HD (High Definition) is used, an input/output speed of 60 frames per second (60p) is achieved for video signals. When connected to 4K Ultra HD and 60p video signal input compatible TV, you can enjoy the sense of realism only available from high-definition im[...]

0 HDMI connections enable connection to various digital AV devices (8 inputs, 3 output) . 83 / Out In For connection to a broad range of digital sources, this unit features 8 HDMI inputs, including 1 on the front panel that lets you quickly and conveniently connect a camcorder, game console or other HDMI- equipped device. There are dual HDMI output[...]

0 Wireless connection with Bluetooth devices can be carried out easily ( v p. 85) . You can enjoy music simply by connecting wirelessly with your smartphone, tablet, PC, etc. 0 Compatible with the “Denon Remote App” z for performing basic operations of the unit with an iPad, iPhone or Android™ devices (Google, Amazon Kindle Fire) “Denon Rem[...]

Easy operation 0 “Setup Assistant” provides easy-to-follow setup instructions First select the language when prompted. Then simply follow the instructions displayed on the TV screen to set up the speakers, network, etc. 0 Easy to use Graphical User Interface This unit is equipped with a Graphical User Interface for improved operability. Content[...]

Part names and functions Front panel . u w qt r e y A B C D E F G Contents Connections Playback Settings Tips Appendix 15 Front panel Display Rear panel Remote Index[...]

. e w qr t y u A Power operation button ( X ) Used to turn the power of the MAIN ZONE (room where this unit is located) on/off (standby). ( v p. 75) B Power indicator This is lit as follows according to the power status: 0 Green : Power on 0 Off: Normal standby 0 Red: 0 When “HDMI Pass Through” is set to “On” ( v p. 181) 0 When “HDMI Cont[...]

With the door open . io Q 0 qw rt yu e A ZONE2 ON/OFF button This turns the power of ZONE2 on/off. ( v p. 156) B ZONE2 SOURCE button This selects the input source for ZONE2. ( v p. 156) C ZONE3 ON/OFF button This turns the power of ZONE3 on/off. ( v p. 156) D ZONE3 SOURCE button This selects the input source for ZONE3. ( v p. 156) E STATUS button E[...]

. Q 3 Q 4 Q 8 Q 1 Q 2 Q 7 Q 6 Q 5 K AUX1 HDMI connector This is used to connect HDMI output compatible devices such as video camcorders and game consoles. ( v p. 63) L USB port This is used to connect USB storages (such as USB memory devices) and the USB cable supplied with iPod. ( v p. 65) M Headphones jack (PHONES) This is used to connect headpho[...]

Display . Q0 Q1 Q2 i uo y t r e w q G H I J K L A Input signal indicators The respective indicator will light corresponding to the input signal. ( v p. 193) B Decoder indicators These light when Dolby or DTS signals are input or when the Dolby or DTS decoder is running. C Audyssey ® indicator This lights when “MultEQ ® XT32”, “Dynamic EQ”[...]

. Q0 Q1 Q2 i uo G Sleep timer indicator This lights when the sleep mode is selected. ( v p. 145) H MUTE indicator This blinks while the sound is muted. ( v p. 76, 157) I Volume indicator J Information display The input source name, sound mode, setting values and other information are displayed here. K Front speaker indicator This lights according t[...]

Rear panel . 1 CBL/SAT PHONO 1 CBL/SAT 2 DVD 2 CD 1 TV AUDIO 6 MEDIA PLAYER 2 DVD 12 3 Blu-ray 5 CD 4 GAME 1 CBL/SAT 1 CBL/SAT 2 DVD 2 DVD 4 GAME (ASSIGNABLE) DIGITAL AUDIO RS-232C REMOTE CONTROL TRIGGER OUT AUDIO (ASSIGNABLE) (ASSIGNABLE) VIDEO COMPONENT VIDEO VIDEO COMPONENT VIDEO MONITOR/ZONE2 MONITOR ZONE2 3 Blu-ray Y P B /C B P R /C R COAXIAL [...]

. 1 CBL/SAT PHONO 1 CBL/SAT 2 DVD 2 CD 1 TV AUDIO 6 MEDIA PLAYER 2 DVD 12 3 Blu-ray 5 CD 4 GAME 1 CBL/SAT 1 CBL/SAT 2 DVD 2 DVD 4 GAME (ASSIGNABLE) DIGITAL AUDIO RS-232C REMOTE CONTROL TRIGGER OUT AUDIO (ASSIGNABLE) (ASSIGNABLE) VIDEO COMPONENT VIDEO VIDEO COMPONENT VIDEO MONITOR/ZONE2 MONITOR ZONE2 3 Blu-ray Y P B /C B P R /C R COAXIAL OPTICAL STR[...]

. 1 CBL/SAT PHONO 1 CBL/SAT 2 DVD 2 CD 1 TV AUDIO 6 MEDIA PLAYER 2 DVD 12 3 Blu-ray 5 CD 4 GAME 1 CBL/SAT 1 CBL/SAT 2 DVD 2 DVD 4 GAME (ASSIGNABLE) DIGITAL AUDIO RS-232C REMOTE CONTROL TRIGGER OUT AUDIO (ASSIGNABLE) (ASSIGNABLE) VIDEO COMPONENT VIDEO VIDEO COMPONENT VIDEO MONITOR/ZONE2 MONITOR ZONE2 3 Blu-ray Y P B /C B P R /C R COAXIAL OPTICAL STR[...]

Remote control unit . SOUND MODE SOUN D MOD E POWER POWE R AVR CONTROL AV R CON TROL QUICK SELECT QUICK SELECT TUNE TUNE TUNE TUNE PURE PU RE MOVIE MO VI E GAME GA ME MUSIC MU SI C GAME GAME CB CB L / SAT Blu-ray Blu- ray D VD VD AUX1 AUX1 AUX2 AUX2 INTE RN ET R ADIO ADIO iPo iPo d/ USB USB VOLUME VO LU ME OPTION OPTI ON INFO INFO BACK BACK SETUP S[...]

. SOUND MODE SOUN D MOD E POWER POWE R AVR CONTROL AV R CON TROL QUICK SELECT QUICK SELECT TUNE TUNE TUNE TUNE PURE PU RE MOVIE MO VI E GAME GA ME MUSIC MU SI C GAME GAME CB CB L / SAT Blu-ray Blu- ray D VD VD AUX1 AUX1 AUX2 AUX2 INTE RN ET R ADIO ADIO iPo iPo d/ USB USB VOLUME VO LU ME OPTION OPTI ON INFO INFO BACK BACK SETUP SETU P CH/ PAGE P AG [...]

. SOUND MODE SOUN D MOD E POWER POWE R AVR CONTROL AV R CON TROL QUICK SELECT QUICK SELECT TUNE TUNE TUNE TUNE PURE PU RE MOVIE MO VI E GAME GA ME MUSIC MU SI C GAME GAME CB CB L / SAT Blu-ray Blu- ray D VD VD AUX1 AUX1 AUX2 AUX2 INTE RN ET R ADIO ADIO iPo iPo d/ USB USB VOLUME VO LU ME OPTION OPTI ON INFO INFO BACK BACK SETUP SETU P CH/ PAGE P AG [...]

o Contents Connecting speakers 28 Connecting a TV 55 Connecting a playback device 59 Connecting an iPod or USB memory device to the USB port 65 Connecting an FM/AM antenna 67 Connecting to a home network (LAN) 69 Connecting an external control device 71 Connecting the power cord 73 NOTE 0 Do not plug in the power cord until all connections have bee[...]

Connecting speakers Install speakers and connect them to this unit. ( v p. 28, 35) Speaker installation Determine the speaker system depending on the number of speakers you are using and install each speaker and subwoofer in the room. Speaker installation is explained using this example of a typical installation. . C FL FR SBL SBR SB SW1 SW2 FWL FW[...]

. FHL FHR TRR TRL TFR TFL RHL RHR TMR TML FHL/FHR (Front height speaker left/ right) : Place the FRONT HEIGHT left and right speakers directly above the front speakers. Mount them as close to the ceiling as possible and aim them towards the main listening position. TFL/TFR (Top front speaker left/right) : Mount the TOP FRONT left and right speakers[...]

. FDL FDR BDL BDR SDL SDR FDL/FDR (Front Dolby speaker left/ right) : Place the FRONT DOLBY ENABLED speaker on the front speaker. For a Dolby enabled speaker integrated with a front speaker, place the Dolby enabled speaker instead of the front speaker. SDL/SDR (Surround Dolby speaker left/ right) : Place the SURROUND DOLBY ENABLED speaker on the su[...]

0 This unit is compatible with Audyssey DSX ® , Dolby Atmos and DTS Neo:X which offers an even wider and deeper surround sensation. ( v p. 295, 296, 299) When using Audyssey DSX ® , install front wide speakers or front height speakers. 0 Use the illustration below as a guide for how high each speaker should be installed. The height does not need [...]

o When 7.1-channel speakers are installed using surround back speakers . z 1 z 2 z 3 FL SW C SL SBL FR SR SBR Listening position z 1:22° - 30° z 2:90° - 110° z 3:135° - 150° When using a single surround back speaker, place it directly behind the listening position. o When 9.1-channel speakers are installed using front wide speakers . z 3 z 2 [...]

o When 5.1-channel speakers are installed . z 1 z 2 FL SW C SL FR SR z 1:22° - 30° z 2:120° Contents Connections Playback Settings Tips Appendix 33 Front panel Display Rear panel Remote Index[...]

o Layout including height speakers and top speakers n Dolby Atmos layout example Combination of 7.1-channel layout with surround back speaker and top front/top rear speakers. . C FL FR SBL SBR SW TRR TRL TFR TFL SL SR n DTS Neo:X layout example Combination of 9.1-channel layout with surround back/front wide speakers, and front height speakers. . FH[...]

Speaker connection Here we connect the speakers in the room to this unit. This section explains how to connect them using typical examples. NOTE 0 Disconnect this unit’s power plug from the power outlet before connecting the speakers. Also, turn off the subwoofer. 0 Connect so that the speaker cable core wires do not protrude from the speaker ter[...]

o Connecting the speaker cables Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on the speakers being connected to this unit, and be sure to connect the channels and polarities correctly. 1 Peel off about 10 mm of sheathing from the tip of the speaker cable, then either twist the core wire tightly or termi[...]

o About the speaker cable label (supplied) for channel identification The channel display section for speaker terminals on the rear panel is color-coded for each channel to be identifiable. Speaker terminals Color FRONT L White FRONT R Red CENTER Green SURROUND L Light blue SURROUND R Blue SURROUND BACK L Beige SURROUND BACK R Brown FRONT WIDE L Li[...]

Speaker configuration and “Amp Assign” settings This unit has a built-in 9-channel power amplifier. In addition to the basic 5.1-channel system, a variety of speaker systems can be configured by changing the “Amp Assign” ( v p. 205) settings to suit the application, such as 7.1-channel systems, bi-amp connections and 2-channel systems for m[...]

In addition to the connections described in ( v p. 40 - 54), this unit allows for various speaker connections with the “Amp Assign” setting. Also refer to the menu screen in “View Terminal Config.” on the “Amp Assign” setting screen, which shows how to make connections in your environment. . 1 SUBWOOFER T.REAR CENTER SURROUND FRONT WIDE[...]

o Standard configuration and connection n 5.1-channel playback This serves as a basic 5.1-channel surround system. . FL SW C SL FR SR . 1 CBL/SAT 1 CBL/SAT 2 DVD 2 CD 1 TV AUDIO 6 MEDIA PLAYER 2 DVD 12 3 Blu-ray 5 CD 4 GAME (ASSIGNABLE) DIGITAL AUDIO RS-232C REMOTE CONTROL TRIGGER OUT COAXIAL OPTICAL STRAIGHT CABLE IR DC12V 150mA MAX. ZONE2 ZONE3 F[...]

n 7.1-channel playback (surround back) This 7.1-channel surround system is the same as a basic 5.1-channel system but with surround back speakers. . FL SW SL FR SR SBR SBL . 1 CBL/SAT 1 CBL/SAT 2 DVD 2 CD 1 TV AUDIO 6 MEDIA PLAYER 2 DVD 12 3 Blu-ray 5 CD 4 GAME (ASSIGNABLE) DIGITAL AUDIO RS-232C REMOTE CONTROL TRIGGER OUT COAXIAL OPTICAL STRAIGHT C[...]

o Advanced connections n 9.1-channel playback This system, which is based on a 5.1-channel system, plays back up to 9.1-channels at the same time. You can connect speakers for up to 11-channels for MAIN ZONE. When you connect speakers for 10 or more channels, the output speakers automatically switch according to the input signal and sound mode. . F[...]

n 11.1-channel playback This system, which is based on a 5.1-channel system, plays back up to 11.1-channels at the same time. You can connect speakers for up to 13-channels for MAIN ZONE by using an external power amplifier. When you connect speakers for 12 or more channels, the output speakers automatically switch according to the input signal and[...]

n 7.1-channel playback (bi-amp connection of front speakers) This system plays back 7.1-channels. You can use the bi-amp connection for front speakers. Bi-amp connection is a method to connect separate amplifiers to the tweeter terminal and woofer terminal of a speaker that supports bi-amplification. This connection enables back EMF (power returned[...]

n Exclusive 9.1-channel playback + 2-channel playback speakers You can connect speakers used exclusively for 2-channel playback, which are used for the direct and stereo modes, and speakers used exclusively for 9.1 multi-channel playback. The speakers used exclusively for multi-channel playback and the speakers used exclusively for 2-channel playba[...]

n Exclusive 7.1-channel playback + 2-channel playback (bi-amp connection) speakers You can connect speakers used exclusively for 2-channel playback, which are used for the direct and stereo modes, and speakers used exclusively for 7.1 multi-channel playback. You can use the bi-amp connection for the speakers exclusively used for 2-channel playback.[...]

n 7.1-channel playback + front speakers of second unit This system enables switching playback between front speakers A and B as desired. You can connect speakers for up to 9-channels for MAIN ZONE. When you connect speakers for 8 or more channels, the output speakers automatically switch according to the input signal and sound mode. . FHL SW C SL S[...]

n 7.1-channel playback (MAIN ZONE) + 2-channel playback (ZONE2 or ZONE3) This type of configuration plays back 7.1-channels in MAIN ZONE and 2-channels in ZONE2. (Speakers can output audio from ZONE3 instead of ZONE2 (Assign Mode: 7.1ch + ZONE3).) You can connect speakers for up to 9-channels for MAIN ZONE. When you connect speakers for 8 or more c[...]

n 5.1-channel playback (bi-amp connection of front speakers: MAIN ZONE) + 2-channel playback (ZONE2) This type of configuration plays back 5.1-channels in MAIN ZONE and 2-channels in ZONE2. You can use the bi-amp connection for front speakers in MAIN ZONE. . SW C SL SR ZONE2 L ZONE2 R FL (Bi-Amp) FR (Bi-Amp) MAIN ZONE ZONE2 . 1 CBL/SAT 1 CBL/SAT 2 [...]

n 5.1-channel playback (MAIN ZONE) + 2-channel playback (ZONE2) + 2-channel playback (ZONE3) This type of configuration plays back 5.1-channels in MAIN ZONE and 2-channels in ZONE2 and ZONE3. . FL SW C SL FR SR ZONE2 L ZONE2 R ZONE3 L ZONE3 R MAIN ZONE ZONE2 ZONE3 . 1 CBL/SAT 1 CBL/SAT 2 DVD 2 CD 1 TV AUDIO 6 MEDIA PLAYER 2 DVD 12 3 Blu-ray 5 CD 4 [...]

n 7.1-channel playback (MAIN ZONE) + 1-channel playback (ZONE2) + 1-channel playback (ZONE3) This type of configuration plays back 7.1-channels in MAIN ZONE and 1-channel (monaural) in ZONE2 and ZONE3. You can connect speakers for up to 9-channels for MAIN ZONE. When you connect speakers for 8 or more channels, the output speakers automatically swi[...]

o Dolby Atmos This speaker configuration is optimized for Dolby Atmos playback. n 11.1-channel system This system configuration plays back 11.1-channels by using an external power amplifier. . C FL FR SBL SBR SW TRR TRL TFR TFL SL SR . 1 CBL/SAT 1 CBL/SAT 2 DVD 2 CD 1 TV AUDIO 6 MEDIA PLAYER 2 DVD 12 3 Blu-ray 5 CD 4 GAME (ASSIGNABLE) DIGITAL AUDIO[...]

n 9.1-channel system This configuration uses only this unit for Dolby Atmos playback. . C FL FR SBL SBR SW SL SR TMR TML . 1 CBL/SAT 1 CBL/SAT 2 DVD 2 CD 1 TV AUDIO 6 MEDIA PLAYER 2 DVD 12 3 Blu-ray 5 CD 4 GAME (ASSIGNABLE) DIGITAL AUDIO RS-232C REMOTE CONTROL TRIGGER OUT COAXIAL OPTICAL STRAIGHT CABLE IR DC12V 150mA MAX. ZONE2 ZONE3 FRONT SURROUND[...]

o Connecting an external power amplifier You can use this unit as a pre-amp by connecting an external power amplifier to the PRE OUT connectors. By adding a power amplifier to each channel, the realness of the sound can be further enhanced. Select the terminal to use and connect the device. When using just one surround back speaker, connect it to t[...]

Connecting a TV Connect a TV to this unit so that the input video is output to the TV. You can also enjoy audio from the TV on this unit. How to connect a TV depends on the connectors and functions equipped on the TV. ARC (Audio Return Channel) function plays TV audio on this unit by sending the TV audio signal to this unit via HDMI cable. . No Yes[...]

Connection 1 : TV equipped with an HDMI connector and compatible with the ARC (Audio Return Channel) Use an HDMI cable to connect a TV that is compatible with the ARC function to this unit. Set “HDMI Control” to “On” when using a TV that supports the ARC function. ( v p. 181) When using the HDMI control function, connect to the HDMI MONITOR[...]

Connection 2 : TV equipped with an HDMI connector and incompatible with the ARC (Audio Return Channel) Use an HDMI cable to connect the TV to this unit. To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit. . PHONO AUDIO SIGNAL GND Bluetooth / Wi-Fi ANTENNA Denon Link HD AM FM ANTENNA 1 CBL/SAT 6 MEDIA PLAYER[...]

Connection 3 : TV equipped without an HDMI connector Use a component video or a video cable to connect the TV to this unit. To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit. . PHONO AUDIO SIGNAL GND Bluetooth / Wi-Fi ANTENNA Denon Link HD AM FM ANTENNA 1 CBL/SAT 6 MEDIA PLAYER 2 DVD 12 3 Blu-ray 5 CD 4 GA[...]

Connecting a playback device This unit is equipped with three types of video input connectors (HDMI, component video and composite video) and three types of audio input connectors (HDMI, digital audio and audio). Select input connectors on this unit according to the connectors equipped on the device you want to connect. If the device connected to t[...]

Connecting a set-top box (Satellite tuner/cable TV) This explanation uses the connection with a satellite tuner/cable TV STB as an example. Select the input connectors on this unit to match the connectors on the device that you want to connect to. . PHONO AUDIO SIGNAL GND Bluetooth / Wi-Fi ANTENNA Denon Link HD AM FM ANTENNA 12 RS-232C REMOTE CONTR[...]

Connecting a DVD player or Blu-ray Disc player This explanation uses the connection with a DVD player or Blu-ray disc player as an example. Select the input connectors on this unit to match the connectors on the device that you want to connect to. . PHONO AUDIO SIGNAL GND Bluetooth / Wi-Fi ANTENNA Denon Link HD AM FM ANTENNA 12 RS-232C REMOTE CONTR[...]

Connecting a Blu-ray Disc player compatible with the Denon Link HD function By making a Denon Link HD connection to a player compatible with the Denon Link HD function, you can enjoy higher quality playback compared with when only the HDMI connector connection is made. 0 Both HDMI and Denon Link HD connections are required for this connection metho[...]

Connecting a video camcorder or game console This explanation uses the connection with a video camcorders as an example. Connect a playback device to this unit, such as a video camcorder or game console. . OUT HDMI Video camcorder Contents Connections Playback Settings Tips Appendix 63 Front panel Display Rear panel Remote Index[...]

Connecting a turntable This unit is compatible with turntables equipped with a moving magnet (MM) phono cartridge. When you connect to a turntable with a low output moving coil (MC) cartridge, use a commercially available MC head amp or a step-up transformer. If you set this unit’s input source to “Phono” and you accidentally increase the vol[...]

Connecting an iPod or USB memory device to the USB port To connect an iPod to this unit, use the USB adapter cable that was supplied with the iPod. For operating instructions see “Playing an iPod” ( v p. 77) or “Playing a USB memory device” ( v p. 82). . iPod or USB memory device Denon does not guarantee that all USB memory devices will ope[...]

o Supported iPod/iPhone models . • iP od classic • iP od nano • iP od touc h • iPhone Contents Connections Playback Settings Tips Appendix 66 Front panel Display Rear panel Remote Index[...]

Connecting an FM/AM antenna Connect the antenna, tune in to a broadcast and then move the antenna to the location where there is least noise. Then use tape, etc. to fix the antenna in this location. (“Listening to FM/AM broadcasts” ( v p. 91)) If you are unable to receive a good broadcast signal, we recommend installing an outdoor antenna. For [...]

o Using the AM loop antenna Suspending on a wall Suspend directly on a wall without assembling. . Nail, tack, etc. Standing alone Use the procedure shown above to assemble. When assembling, refer to “AM loop antenna assembly”. . o AM loop antenna assembly 1 Put the stand section through the bottom of the loop antenna from the rear and bend it f[...]

Connecting to a home network (LAN) This unit can connect to a network using a wired LAN or wireless LAN. You can connect this unit to your home network (LAN) to enable various types of playback and operations as described below. 0 Playback of network audio such as Internet Radio and from your media server(s) 0 Playback of music content from online [...]

Wireless LAN When connecting to the network via wireless LAN, connect the external antennas for Bluetooth/wireless connectivity connection to the rear panel and stand them upright. See “Wi-Fi Setup” ( v p. 232) on how to connect to a wireless LAN router. . Internet Modem T o WAN side Router with access point PHONO AUDIO SIGNAL GND Bluetooth / W[...]

Connecting an external control device REMOTE CONTROL jacks When this unit is installed in a location where the remote control signals cannot reach (installation in a cabinet etc.), it can still be controlled by the remote control by connecting a remote control receiver unit (sold separately). You can also use it to remotely control ZONE2 and ZONE3 [...]

TRIGGER OUT jacks When a device with TRIGGER IN jack is connected, the connected device’s power on/standby can be controlled through linked operation to this unit. The TRIGGER OUT jack outputs a maximum 12 V DC /150 mA electrical signal. . PHONO AUDIO SIGNAL GND Bluetooth / Wi-Fi ANTENNA Denon Link HD AM FM ANTENNA 1 CBL/SAT 1 CBL/SAT 2 DVD 2 CD [...]

Connecting the power cord After completing all the connections, insert the power plug into the power outlet. . 1 CBL/SAT 1 CBL/SAT 2 DVD 2 DVD 4 GAME (ASSIGNABLE) DIGITAL AUDIO (ASSIGNABLE) (ASSIGNABLE) VIDEO COMPONENT VIDEO VIDEO COMPONENT VIDEO MONITOR/ZONE2 MONITOR ZONE2 3 Blu-ray Y P B /C B P R /C R FRONT WIDE CENTER HEIGHT1 HEIGHT2 1 SUBWOOFER[...]

o Contents Basic operation Turning the power on 75 Selecting the input source 75 Adjusting the volume 76 Turning off the sound temporarily (Muting) 76 Selecting a sound mode 128 Playback a device Playing a DVD player/Blu-ray Disc player 76 Playing an iPod 77 Playing a USB memory device 82 Playing a Bluetooth device 87 Listening to FM/AM broadcasts [...]

Basic operation . SOUND MODE SOUND MODE AVR CONTROL AVR CONT ROL QUICK SELECT QUICK SELECT TUNE TUNE TUNE TUNE PURE PU RE MOVIE MO VIE GAME GA ME MUSIC MU SI C OPTION OPTIO N INFO INFO BACK BACK SETUP SETUP CH/ PAG E P AGE MENU MENU Z  2 Z 3 Z 3 1 1 2 3 4 2 3 4 5 6 7 8 9 ENTER ENTER 0 +10 +1 0 GHI G H I JKL J K L MNO M N O PQRS P Q R S TUV T U V[...]

Adjusting the volume 1 Use VOLUME df to adjust the volume. 0 The variable range differs according to the input signal and channel level setting. 0 You can also adjust the master volume by turning MASTER VOLUME on the main unit. Turning off the sound temporarily (Muting) 1 Press MUTE : . 0 MUTE indicator on the display flashes. 0 : appears on the TV[...]

Playing an iPod . SOUND MODE SOUN D MOD E POWER POWE R AVR CONTROL AVR CON TROL QUICK SELECT QUICK SELECT TUNE TUNE TUNE TUNE PURE PU RE MOVIE MO VI E GAME GA ME MUSIC MU SI C GAME GAME CB CB L/ SAT Blu-ray Blu- ray D VD VD AUX1 AUX1 AUX2 AUX2 INTE RNET R ADIO ADIO VOLUME VO LUM E INFO INFO SETUP SETU P MENU MEN U Z  2 Z 3 Z 3 1 1 2 3 4 2 3 4 5 [...]

Listening to music on an iPod 1 Connect the iPod to the USB port. ( v p. 65) 2 Press iPod/USB to switch the input source to “iPod/ USB”. “Browse from iPod” is displayed on the display of this unit. 0 Nothing is displayed on the TV screen. 3 Operate iPod itself while seeing the iPod screen to play back music. 0 “iPod Browse Mode” has two[...]

iPod Browse Mode settings In this mode, various lists and screens during playback on the iPod are displayed on the TV screen. This section describes the steps up to playing back tracks on the iPod in “On-Screen”. 1 Press OPTION when the input source is “iPod/USB”. The option menu screen is displayed. 2 Select “iPod Browse Mode”, then pr[...]

o Operations accessible through the option menu This can be operated when the “iPod Browse Mode” is set to “On- Screen”. ( v p. 79) 0 “iPod Browse Mode settings” ( v p. 79) 0 “Performing repeat playback” ( v p. 81) 0 “Performing random playback” ( v p. 81) 0 “Adjusting the audibility of dialog and vocals (Dialog Enhancer)” ([...]

Performing repeat playback 1 Press OPTION with “iPod Browse Mode” set to “On- Screen”. The option menu screen is displayed. 2 Use ui to select “Repeat”, then press ENTER. 3 Use o p to select repeat playback mode. Off (Default) : Repeat playback mode is canceled. One: A file being played is played repeatedly. All: All files in the folder[...]

Playing a USB memory device . SOUND MODE SOUN D MOD E POWER POWE R AVR CONTROL AVR CON TROL QUICK SELECT QUICK SELECT TUNE TUNE TUNE TUNE PURE PU RE MOVIE MO VI E GAME GA ME MUSIC MU SI C GAME GAME CB CB L/ SAT Blu-ray Blu- ray D VD VD AUX1 AUX1 AUX2 AUX2 INTE RNET R ADIO ADIO VOLUME VO LUM E INFO INFO SETUP SETU P MENU MEN U Z 2 Z 3 Z 3 1 1 2 3 4 [...]

Playing files stored on USB memory devices 1 Connect the USB memory device to the USB port. ( v p. 65) 2 Press iPod/USB to switch the input source to “iPod/ USB”. . Folder1 Folder2 Folder3 Music1 Music2 Music3 Music4 OPTION OPTION USB [1/9] Option 3 Use ui p to select the file to be played, then press ENTER. Playback starts. Operation buttons F[...]

o Operations accessible through the option menu 0 “Performing repeat playback” ( v p. 118) 0 “Performing random playback” ( v p. 118) 0 “Searching content with keywords (Text Search)” ( v p. 120) 0 “Playing back music and a favorite picture at the same time (Slideshow)” ( v p. 121) 0 “Setting the Slideshow Interval” ( v p. 122) [...]

Listening to music on a Bluetooth device . SOUND MODE SOUN D MOD E POWER POWE R AVR CONTROL AVR CON TROL QUICK SELECT QUICK SELECT TUNE TUNE TUNE TUNE PURE PU RE MOVIE MO VI E GAME GA ME MUSIC MU SI C GAME GAME CB CB L/ SAT Blu-ray Blu- ray D VD VD AUX1 AUX1 AUX2 AUX2 INTE RNET R ADIO ADIO iPo iPo d/ USB USB VOLUME VO LUM E INFO INFO SETUP SETU P C[...]

Pairing with a Bluetooth device In order to enjoy music from a Bluetooth device on this unit, the Bluetooth device must first be paired with this unit. Once the Bluetooth device has been paired, it does not need to be paired again. 1 Prepare for playback. A Connect the supplied external antennas for Bluetooth/wireless connectivity to the Bluetooth/[...]

Playing a Bluetooth device Check the following before you play back music. 0 The Bluetooth function of the Bluetooth device must be turned on 0 Pairing must be completed 1 Press Bluetooth to switch the input source to “Bluetooth”. The unit will automatically connect to the most recently used Bluetooth device. 2 Start playing the Bluetooth devic[...]

NOTE 0 To operate the Bluetooth device with the remote control of this unit, the Bluetooth device needs to support the AVRCP profile. 0 The remote control of this unit is not guaranteed to work with all Bluetooth devices. 0 Depending on the type of Bluetooth device, this unit outputs audio that is coupled to the volume setting on the Bluetooth devi[...]

Pairing with the Pairing Mode Pair a Bluetooth device with this unit. 1 Press OPTION when the input source is “Bluetooth”. The option menu screen is displayed. 2 Use ui to select “Pairing Mode”, then press ENTER. The device will go into the pairing mode. 3 Select this unit when its name appears in the list of devices displayed on the screen[...]

Listening to FM/AM broadcasts . SOUND MODE SOUN D MOD E POWER POWE R AVR CONTROL AVR CON TROL QUICK SELECT QUICK SELECT PURE PU RE MOVIE MO VI E GAME GA ME MUSIC MU SI C GAME GAME CB CB L/ SAT Blu-ray Blu- ray D VD VD AUX1 AUX1 AUX2 AUX2 INTE RNET R ADIO ADIO iPo iPo d/ USB USB VOLUME VO LUM E INFO INFO SETUP SETU P MENU MEN U Z 2 Z 3 Z 3 1 2 3 4 E[...]

Listening to FM/AM broadcasts 1 Connect the antenna. (“Connecting an FM/AM antenna” ( v p. 67)) 2 Press TUNER to switch the input source to “Tuner”. G TV screen H . TUNE+/- TUNE+/- STEREO AUTO CH / CH / OPTION OPTION Tuner FM 87.50MHz Now Playing Tune Preset Option CH 1 G Display of this unit H . 01 FM 87.50MHz 3 Press OPTION. The option me[...]

o Operations accessible through the option menu 0 “Tuning in by entering the frequency (Direct Tune)” ( v p. 93) 0 “RDS search” ( v p. 93) 0 “PTY search” ( v p. 94) 0 “TP search” ( v p. 95) 0 “Radio Text” ( v p. 95) 0 “Changing the tune mode (Tune Mode)” ( v p. 96) 0 “Tuning in to stations and presetting them automatically[...]

Tuning in by entering the frequency (Direct Tune) You can enter the receiving frequency directly to tune in. 1 Press OPTION when the input source is “Tuner”. The option menu screen is displayed. 2 Use ui to select “Direct Tune”, then press ENTER. The screen that lets you enter the frequency is displayed. 3 Use ui or 0 – 9 to select a numb[...]

PTY search Use this function to find RDS stations broadcasting a designated program type (PTY). PTY identifies the type of RDS program. The program types and their displays are as follows: NEWS News WEATHER Weather AFFAIRS Current Affairs FINANCE Finance INFO Information CHILDREN Children’s program SPORT Sports SOCIAL Social Affairs EDUCATE Educa[...]

TP search TP identifies programs that carry traffic announcements. This allows you to easily find out the latest traffic conditions in your area before leaving home. Use this function to find RDS stations broadcasting traffic programs (TP stations). 1 Press OPTION when the input source is “Tuner”. The option menu screen is displayed. 2 Use ui t[...]

Changing the tune mode (Tune Mode) You can change the mode for tuning into FM and AM broadcasts. If you cannot tune in automatically with “Auto” mode, change the mode to “Manual” and tune in manually. 1 Press OPTION when the input source is “Tuner”. The option menu screen is displayed. 2 Use ui to select “Tune Mode”, then press ENTE[...]

Presetting the current broadcast station (Preset Memory) Your favorite broadcast stations can be preset so that you can tune them in easily. Up to 56 stations can be preset. 1 Tune in the broadcast station you want to preset. (“Listening to FM/AM broadcasts” ( v p. 91)) 2 Press OPTION. The option menu screen is displayed. 3 Use ui to select “[...]

Specify a name for the preset broadcast station (Preset Name) You can set the name to the preset broadcast station or change it. Up to eight characters can be input. 1 Press OPTION when the input source is “Tuner”. The option menu screen is displayed. 2 Use ui to select “Preset Name”, then press ENTER. The Preset Name screen is displayed. 3[...]

Skipping preset broadcast stations (Preset Skip) Perform auto preset memory to save all the broadcasting stations that can be received in the memory. Selecting a broadcast station becomes easier by skipping unnecessary memories. 1 Press OPTION when the input source is “Tuner”. The option menu screen is displayed. 2 Use ui to select “Preset Sk[...]

Cancelling Preset Skip 1 Use o p to select a group containing a broadcast station to cancel the skip for while the “Preset Skip ” screen is displayed. 2 Use ui to select a broadcast station to cancel the skip for. 3 Use o p to select “On”. The skip is cancelled. NOTE Preset skip cannot be cancelled for groups. Contents Connections Playback [...]

Listening to Internet Radio . POWER POWE R AVR CONTROL AVR CON TROL QUICK SELECT QUICK SELECT GAME GAME CB CB L/ SAT Blu-ray Blu- ray D VD VD AUX1 AUX1 AUX2 AUX2 INTE RNET R ADIO ADIO iPo iPo d/ USB USB VOLUME VO LUM E INFO INFO SETUP SETU P MENU MEN U Z 2 Z 3 Z 3 1 2 3 4 MAIN MAI N PHONO PH ON O DE V. V . T V AVR DEVICE DEVI CE T V MED IA IA PLAY [...]

Listening to Internet Radio 1 Prepare for playback. 0 Check the network environment, then turn on this unit’s power. (“Connecting to a home network (LAN)” ( v p. 69)) 2 Press ONLINE MUSIC. 0 You can also press INTERNET RADIO to select the input source “Internet Radio” directly. 3 Use uio p to select “Internet Radio”, then press ENTER.[...]

5 Use ui p to select the station, then press ENTER. Playback starts once buffering reaches “100%”. Operation buttons Function 1 Playback 2 Stop ENTER (Press and hold) Stop CH/PAGE d f Switch to the previous page/next page in the list display 0 The display switches between track title and radio station name etc. each time the main unit’s STATU[...]

Using vTuner to add Internet Radio stations to favorites There are many Internet Radio stations in the world, and this unit can tune into these stations. But finding the radio station you want to hear may be difficult, because there are too many stations. If this is the case, then please use vTuner, an Internet Radio station search website specific[...]

Playing back files stored on a PC and NAS . SOUND MODE SOUN D MOD E POWER POWE R AVR CONTROL AVR CON TROL QUICK SELECT QUICK SELECT TUNE TUNE TUNE TUNE PURE PU RE MOVIE MO VI E GAME GA ME MUSIC MU SI C GAME GAME CB CB L/ SAT Blu-ray Blu- ray D VD VD AUX1 AUX1 AUX2 AUX2 INTE RNET R ADIO ADIO VOLUME VO LUM E INFO INFO SETUP SETU P MENU MEN U Z 2 Z 3 [...]

Applying media sharing settings Here, we apply the settings to share music files stored on a PC and NAS on the network. If you are using a Media Server, be sure to apply this setting first. . o When using Windows Media Player 12 (Windows 7 / Windows 8) 1 Start up Windows Media Player 12 on the PC. 2 Select “More streaming options...” in the “[...]

Playing back files stored on a PC and NAS Use this procedure to play music files, image files or playlists. 1 Prepare for playback. A Check the network environment, then turn on this unit’s power. (“Connecting to a home network (LAN)” ( v p. 69)) B Prepare the computer. ( v Computer’s operating instructions) 2 Press ONLINE MUSIC. 3 Use uio [...]

0 The display switches between track title, artist name, and album title each time the main unit’s STATUS is pressed. 0 When a WMA (Windows Media Audio), MP3 or MPEG-4 AAC file includes album art data, the album art can be displayed while the music files are playing. 0 If you use Ver.11 or later of Windows Media Player, the album art for WMA file[...]

Viewing photographs on the Flickr site . SOUND MODE SOUN D MOD E POWER POWE R AVR CONTROL AVR CON TROL QUICK SELECT QUICK SELECT PURE PU RE MOVIE MO VI E GAME GA ME MUSIC MU SI C GAME GAME CB CB L/ SAT Blu-ray Blu- ray D VD VD AUX1 AUX1 AUX2 AUX2 INTE RNET R ADIO ADIO VOLUME VO LUM E INFO INFO SETUP SETU P MENU MEN U Z 2 Z 3 Z 3 1 1 2 3 4 2 3 4 5 6[...]

Viewing photographs shared by particular users 1 Prepare for playback. 0 Check the network environment, then turn on this unit’s power. (“Connecting to a home network (LAN)” ( v p. 69)) 2 Press ONLINE MUSIC. 3 Use uio p to select “Flickr”, then press ENTER. . Favorites Internet Radio Online Music Media Server 4 Use ui to select “Add Fli[...]

8 Use ui to select the folder, then press ENTER. Favorites : Displays the favorite photographs of the specified user. Photostream : Displays a list of shared photographs. PhotoSets : Displays the folder (photograph album) list. Contacts : Displays the screen name used by the specified user in Contacts. Remove this Contact : Deletes a user from Flic[...]

Viewing all photographs on Flickr 1 Use ui to select “All Content”, then press ENTER. 2 Use ui to select the folder, and then press ENTER. Interestingness : Displays photographs that are popular from the number of user comments or number of times they are added as favorites. Recent : Displays the most recently added photographs. Search by text [...]

AirPlay function Music files stored on your iPhone, iPod touch, iPad or iTunes can be played on this unit via the network. 0 + is displayed on the menu screen while AirPlay is being operated. 0 Source input will be switched to “Online Music” when AirPlay playback is started. 0 You can stop AirPlay playback by pressing o or choosing other input [...]

Playing songs from your iPhone, iPod touch or iPad If you update your “iPhone/iPod touch/iPad” to iOS 4.2.1 or later, you can stream music stored in your “iPhone/iPod touch/iPad” directly to this unit. 1 Connect your iPhone, iPod touch or iPad Wi-Fi to the same network as this unit. 0 For details, see your device’s manual. 2 Play the song[...]

Selecting multiple speakers (devices) It is possible to play iTunes songs on your home’s AirPlay compatible speakers (devices) other than those of this unit. 1 Click the AirPlay icon ' and select “Multiple”. 2 Check the speakers you want to use. NOTE In playback using the AirPlay function, the sound is output at the iPhone, iPod touch, i[...]

Spotify Connect function Spotify is the world’s most popular streaming service. If you subscribe to Spotify Premium, you can control your new speaker with your phone or tablet. Because Spotify is built-in to your speaker, you can still take calls or use other apps - the music never stops. To try Spotify Premium free for 30 days, or learn more abo[...]

Convenience functions . SOUND MODE SOUN D MOD E POWER POWE R AVR CONTROL AVR CON TROL QUICK SELECT QUICK SELECT PURE PU RE MOVIE MO VI E GAME GA ME MUSIC MU SI C GAME GAME CB CB L/ SAT Blu-ray Blu- ray D VD VD AUX1 AUX1 AUX2 AUX2 INTE RNET R ADIO ADIO VOLUME VO LUM E INFO INFO SETUP SETU P MENU MEN U Z 2 Z 3 Z 3 1 1 2 3 4 2 3 4 5 6 7 8 9 ENTER ENTE[...]

Performing repeat playback n Supported input sources : USB / Media Server / Bluetooth 1 While content is playing, press OPTION. The option menu screen is displayed. 2 Use ui to select “Repeat”, then press ENTER. 3 Use o p to select repeat playback mode. Off (Default) : Repeat playback mode is canceled. One: A file being played is played repeate[...]

Registering to Favorites You can register a total of 100 favorites. o Supported input sources: Internet Radio / Media Server 1 While content is playing, press OPTION. The option menu screen is displayed. 2 Use ui to select “Save to Favorites”, then press ENTER. “Favorite added” is displayed, and the current content is added to favorites. 0 [...]

Deleting content added to favorites 1 Press ONLINE MUSIC. 2 Use uio p to select “Favorites”, then press ENTER. 3 Use ui to select the content you want to delete from favorites, then press OPTION. The option menu screen is displayed. 4 Use ui to select “Remove from Favorites”, then press ENTER. “Favorite removed” is displayed, and the se[...]

Playing back music and a favorite picture at the same time (Slideshow) n Supported input sources : USB 1 Play back a still picture. 0 Playing back still pictures stored on USB memory devices. ( v p. 83) 2 Play back a music file. ( v p. 83) 3 Press OPTION. The option menu screen is displayed. 4 Use ui to select “Slideshow”, then press ENTER. The[...]

Setting the Slideshow Interval Set the playback interval when playing back a slideshow of still picture (JPEG) files stored on a USB memory device or media server, or on the Flickr website. n Supported input sources : USB / Media Server / Flickr 1 While the list is displayed, press OPTION. The option menu screen is displayed. 2 Use ui to select “[...]

Adjusting the volume of each channel to match the input source (Channel Level Adjust) The volume of each channel can be changed while listening to music. You can set this for each input source. 1 Press OPTION. The option menu screen is displayed. 2 Use ui to select “Channel Level Adjust”, then press ENTER. The channel level adjust screen is dis[...]

Adjusting the tone (Tone) Adjusts the tonal quality of the sound. 1 Press OPTION. The option menu screen is displayed. 2 Use ui to select “Tone”, then press ENTER. The Tone screen is displayed. 3 Use o p to set the tone control function to on/off. On: Allow tone adjustment (bass, treble). Off (Default) : Playback without tone adjustment. 4 Sele[...]

Displaying your desired video during audio playback (Video Select) This unit can display video from a different source on TV during audio playback. You can set this for each input source. n Supported input sources: iPod/USB / CD z / Tuner / Online Music / Bluetooth / Phono z This cannot be set when any of the HDMI, component video or video connecto[...]

Adjusting the picture quality for your viewing environment (Picture Mode) n Supported input sources : CBL/SAT / DVD / Blu-ray / Game / AUX1 / AUX2 / Media Player / iPod/USB / Online Music / CD z / TV Audio z z You can set the picture mode when an HDMI, component video or video connector is assigned. 1 Press OPTION during video playback. The option [...]

Playing the same music in all zones (All Zone Stereo) You can play back the music being played back in MAIN ZONE simultaneously in ZONE2 and ZONE3 (other rooms). It is useful when you want to enjoy the same music at the same time in multiple rooms during home party or when you want to play back the same BGM in the entire house. 1 Press OPTION. The [...]

Selecting a sound mode . SOUND MODE SOUN D MOD E POWER POWE R AVR CONTROL AVR CON TROL QUICK SELECT QUICK SELECT GAME GAME CB CB L/ SAT Blu-ray Blu- ray D VD VD AUX1 AUX1 AUX2 AUX2 INTE RNET R ADIO ADIO iPo iPo d/ USB USB VOLUME VO LUM E INFO INFO SETUP SETU P CH/ PAG E P AGE MENU MEN U Z  2 Z 3 Z 3 1 1 2 3 4 2 3 4 5 6 7 8 9 ENTER ENTE R 0 +10 +[...]

Selecting a sound mode 1 Press MOVIE, MUSIC or GAME to select a sound mode. MOVIE : Switches to the sound mode suitable for enjoying movies and TV programs. MUSIC : Switches to the sound mode suitable for enjoying music. GAME : Switches to the sound mode suitable for enjoying games. 0 The MOVIE, MUSIC, or GAME button memorizes the last sound mode s[...]

Direct playback Sound recorded in source is played as is. 1 Press PURE to select “Direct”. Direct playback begins. While DSD signals are played back, “DSD Direct” is displayed. Pure Direct playback This mode is for playback with higher sound quality than in Direct playback mode. This mode turns off the main unit display and analog video cir[...]

Auto surround playback This mode detects the type of input digital signal, and automatically selects the corresponding mode for playback. Perform stereo playback when the input signal is PCM. When the input signal is Dolby Digital or DTS, the music is played back according to the respective channel number. 1 Press PURE to select “Auto”. Auto su[...]

o Description of sound mode types Dolby sound mode Sound mode type Description Dolby Surround This mode uses Dolby Surround Upmixer to extend various sources to natural and realistic multi channels for playback. Use ceiling speakers such as top middle speakers to realize a three-dimensional sound field. Dolby Digital This mode can be selected when [...]

DTS sound mode Sound mode type Description DTS Neo:X This matrix decoding technology uses the DTS Neo:X decoder to playback 2-channel source or 5.1/6.1/7.1-channel surround sources as a maximum of 11.1-channel surround sound. The “Music” mode is suitable for playing music, the “Cinema” mode is suitable for playing movies and the “Game” [...]

PCM multi-channel sound mode Sound mode type Description Multi Ch In This mode can be selected when playing multi-channel PCM/DSD sources. Audyssey DSX ® sound mode Sound mode type Description Audyssey DSX ® (A-DSX) z This mode creates playback for the new channels (front wide or front height) in 5.1-channel systems. By adding front wide or front[...]

Original sound mode Sound mode type Description Multi Ch Stereo This mode is for enjoying stereo sound from all speakers. Stereo audio (2-channel) sources are played back via the front (L/R) speakers, the surround speakers and surround back speakers (if connected). Rock Arena This mode simulates the expansive sound of a live concert in an arena. Ja[...]

Stereo sound mode Sound mode type Description Stereo This mode plays 2-channel stereo audio with no additional surround sound processing. 0 Sound is output from the front left and right speakers, and subwoofer if connected. 0 When multi-channel signals are inputted, they are mixed down to 2-channel audio and are played back with no additional surro[...]

o Sound mode that can be selected for each input signal 0 The following sound modes can be selected using the MOVIE, MUSIC and GAME buttons. 0 Adjust the sound field effect with the menu “Surround Parameter” to enjoy surround sound the way you like it. ( v p. 164) Input signal Sound mode Sound mode MOVIE MUSIC GAME 2-channel z 1 Dolby Surround [...]

Input signal Sound mode Sound mode MOVIE MUSIC GAME Multi-channel z 3 Stereo S S S Dolby Digital Dolby Digital S S S Dolby Digital + Dolby Surround S S S Dolby Digital A-DSX z 4 S S S Dolby Digital + Neo:X Cinema S Dolby Digital + Neo:X Music S Dolby Digital + Neo:X Game S Dolby TrueHD Dolby TrueHD S S S Dolby TrueHD + Dolby Surround z 5 S S S Dolb[...]

Input signal Sound mode Sound mode MOVIE MUSIC GAME Multi-channel z 3 Dolby Digital Plus Dolby Digital Plus S S S Dolby Digital Plus + Dolby Surround z 5 S S S Dolby Atmos z 6 S S S Dolby Digital Plus A-DSX z 4 S S S Dolby Digital Plus + Neo:X Cinema S Dolby Digital Plus + Neo:X Music S Dolby Digital Plus + Neo:X Game S Dolby Atmos Dolby Atmos S S [...]

Input signal Sound mode Sound mode MOVIE MUSIC GAME Multi-channel z 3 DTS-HD / DTS Express DTS-HD Hi Res S S S DTS-HD Mstr S S S DTS-HD Mstr A-DSX z 4 S S S DTS Express S S S DTS Express A-DSX z 4 S S S DTS-HD + Dolby Surround S S S DTS-HD HI Res A-DSX z 4 S S DTS-HD + Neo:X Cinema S DTS-HD + Neo:X Music S S DTS-HD + Neo:X Game S PCM multi-channel [...]

Input signal Sound mode Sound mode MOVIE MUSIC GAME Multi-channel z 3 Multi Ch Stereo S S S Mono Movie S Rock Arena S Jazz Club S Matrix S Video Game S Virtual S S S z 3 Some sound modes cannot be selected depending on the audio format or number of channels of the input signal. For details, see “Types of input signals, and corresponding sound mod[...]

o Views on the display . Dolby D + S Blu-ray q w A Shows a decoder to be used. 0 In the case of the Dolby Digital Plus decoder, “Dolby D +” is displayed. B Shows a decoder that creates sound output. 0 “ k ” indicates that the Dolby Surround decoder is being used. Contents Connections Playback Settings Tips Appendix 142 Front panel Display R[...]

HDMI control function A recent addition to the HDMI standard is CEC (Consumer Electronics Control), which allows control signals from one device to communicate with another device via the HDMI cable connection. Setting procedure 1 Enable the HDMI control function of this unit. Set “HDMI Control” to “On”. ( v p. 181) 2 Turn the power on for [...]

Sleep timer function . SOUND MODE SOUN D MOD E POWER POWE R AVR CONTROL AVR CON TROL QUICK SELECT QUICK SELECT TUNE TUNE TUNE TUNE PURE PU RE MOVIE MO VI E GAME GA ME MUSIC MU SI C GAME GAME CB CB L/ SAT Blu-ray Blu- ray D VD VD AUX1 AUX1 AUX2 AUX2 INTE RNET R ADIO ADIO iPo iPo d/ USB USB VOLUME VO LUM E OPTION OPTI ON INFO INFO BACK BACK SETUP SET[...]

Using the sleep timer 1 Press MAIN, Z2 or Z3 to select the operating zone with the remote control. The button for the selected zone is lit. 2 Press SLEEP and display the time you want to set. 0 The B indicator lights up on the display and the sleep timer starts. 0 You can set the sleep timer in the range from 10 to 120 minutes in steps of 10 minute[...]

Quick select plus function . SOUND MODE SOUN D MOD E POWER POWE R AVR CONTROL AVR CON TROL TUNE TUNE TUNE TUNE PURE PU RE MOVIE MO VI E GAME GA ME MUSIC MU SI C GAME GAME CB CB L/ SAT Blu-ray Blu- ray D VD VD AUX1 AUX1 AUX2 AUX2 INTE RNET R ADIO ADIO iPo iPo d/ USB USB VOLUME VO LUM E OPTION OPTI ON INFO INFO BACK BACK SETUP SETU P CH/ PAG E P AGE [...]

Calling up the settings 1 Press MAIN, Z2 or Z3 to select the operating zone with the remote control. The button for the selected zone is lit. 2 Press QUICK SELECT. The Quick Select settings registered to the button you pressed are called up. 0 The default settings for the input source and volume are as shown below. G MAIN ZONE H Button Input source[...]

Changing the settings 1 Set the items below to the settings you want to register. The following settings from A to I can be memorized for MAIN ZONE, and settings A and B can be memorized for ZONE2 and ZONE3. A Input source ( v p. 75) B Volume ( v p. 76) C Sound mode ( v p. 128) D Audyssey (Audyssey MultEQ ® XT32, Audyssey Dynamic EQ ® , Audyssey [...]

Web control function You can control this unit from a web control screen on a web browser. . This unit PC Router Tablet 0 This unit and the PC or tablet need to be connected correctly to the network in order to use the web control function. (“Connecting to a home network (LAN)” ( v p. 69)) 0 Depending on the settings of your security-related so[...]

4 Enter the IP address of this unit in browser’s address box. For example, if the IP address of this unit is “192.168.100.19”, enter “http://192.168.100.19”. . http://192.168.100.19 File Edit View Tools Help Favorites 5 When the top menu is displayed, click on the menu item you want to operate. . MAIN ZONE CBL/SAT ZONE2 Online Music Load [...]

Playback in ZONE2/ZONE3 (Separate room) You can operate this unit to enjoy video and audio in a room (ZONE2 and ZONE3) that is different from the room where this unit is placed (MAIN ZONE). You can simultaneously play back the same source in both the MAIN ZONE, ZONE2 and ZONE3. You can also play back separate sources in the MAIN ZONE, ZONE2 and ZON[...]

o Connection 2 : Connection through the video output connector and speaker output connector When “Assign Mode” in the menu is set to any of the following audio is output from speakers in ZONE2 or ZONE3. ( v p. 205) n Assign Mode: 7.1ch + ZONE2 . IN VIDEO VIDEO COMPONENT VIDEO YP B P R IN wq w wq (L) (R) ZONE2 or This unit MAIN ZONE ASSIGNABLE S[...]

n Assign Mode: 7.1ch + ZONE2/3-MONO . IN VIDEO VIDEO COMPONENT VIDEO YP B P R IN wq w q ASSIGNABLE SPEAKERS SURROUND BACK SURROUND BACK FRON T ZONE3 ZONE2 or This unit MAIN ZONE COMPONENT VIDEO MONITOR/ZONE2 Y P B /C B P R /C R MONITOR VIDEO ZONE2 Contents Connections Playback Settings Tips Appendix 153 Front panel Display Rear panel Remote Index[...]

o Connection 3 : Connection through the video output connector and external power amplifiers The audio signals of this unit’s ZONE2 and ZONE3 audio output connectors are played on the ZONE2 and ZONE3 power amplifiers. . R L R L IN VIDEO VIDEO COMPONENT VIDEO YP B P R IN A UX IN A UX IN Power amplifier ZONE3 ZONE2 or This unit MAIN ZONE Power ampl[...]

0 The analog audio signal and the 2-channel PCM signal input from HDMI connector or digital connectors (OPTICAL/COAXIAL) can be played back in ZONE2. 0 If you want to play back HDMI signals other than 2-channel PCM in ZONE2, set “HDMI Audio” to “PCM”. ( v p. 240) 2-channel PCM signals are output from a device connected to the input source s[...]

Playback in ZONE2/ZONE3 . SOUND MODE SOUN D MOD E AVR CONTROL AVR CON TROL QUICK SELECT QUICK SELECT TUNE TUNE TUNE TUNE PURE PU RE MOVIE MO VI E GAME GA ME MUSIC MU SI C OPTION OPTI ON INFO INFO BACK BACK SETUP SETU P CH/ PAG E P AGE MENU MEN U Z  2 Z 3 Z 3 1 1 2 3 4 2 3 4 5 6 7 8 9 ENTER ENTE R 0 +10 +1 0 GHI G H I JKL J K L MNO M N O PQRS P Q[...]

o Adjusting the volume Use VOLUME df to adjust the volume. 0 At time of purchase, “Volume Limit” is set to “70 (–10 dB)”. ( v p. 241) Turn MASTER VOLUME after pressing ZONE2 SOURCE or ZONE3 SOURCE on the main unit to adjust the volume. o Turning off the sound temporarily (Muting) Press MUTE : . The sound is reduced to the level set at “[...]

Menu map When using menu operations, connect this unit to a TV and operate this unit while viewing the TV. The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences. Setting items Detailed items Description Page . Audio Subwoofer Level Adjust This setting adjusts[...]

Setting items Detailed items Description Page . Inputs Input Assign Changes input connector assignment. 190 Source Rename Changes the display name for input source. 192 Hide Sources Removes from the display input sources that are not used. 192 Source Level Adjusts the playback level of the audio input. 192 Input Select Sets the audio input mode and[...]

Setting items Detailed items Description Page . General Language Changes the language of the display on the TV screen. 238 ECO Configures the ECO Mode and Auto Standby energy-saving functions. 238 ZONE2 Setup/ ZONE3 Setup Makes settings for audio playback with ZONE2 and ZONE3. 240 Zone Rename Changes the display title of each zone to one you prefer[...]

. SOUND MODE SOUN D MOD E POWER POWE R AVR CONTROL AVR CON TROL QUICK SELECT QUICK SELECT PURE PU RE MOVIE MO VI E GAME GA ME MUSIC MU SI C GAME GAME CB CB L/ SAT Blu-ray Blu- ray D VD VD AUX1 AUX1 AUX2 AUX2 INTE RNET R ADIO ADIO VOLUME VO LUM E INFO INFO SETUP SETU P MENU MEN U Z 2 Z 3 Z 3 1 1 2 3 4 2 3 4 5 6 7 8 9 ENTER ENTE R 0 +10 +1 0 GHI G H [...]

Inputting characters 0 On this unit, you can change the name displayed on the following screens to the names that you prefer. 0 Preset Name ( v p. 98) 0 Text Search ( v p. 120) 0 Source Rename ( v p. 192) 0 Friendly Name ( v p. 236) 0 Zone Rename ( v p. 242) 0 Quick Select Names ( v p. 242) 0 Character input for the network functions 0 The followin[...]

Using the keyboard screen 1 Display the screen for inputting characters. G Example H “Source Rename” screen . Inputs/Source Rename Changes the display name for this source CBL/SAT A N 0 $ B O 1 % C P 2 & D Q 3 ‘ E R 4 ( F S 5 ) G T 6 * H U 7 + I V 8 , J W 9 ; K X ! < L Y “ = M Z # > CBL/SAT Clear Clear Insert Insert Delete Delete [...]

Audio Make audio-related settings. Subwoofer Level Adjust This setting adjusts the volume level for the subwoofer. o Subwoofer Level Adjust Set whether to adjust the subwoofer level. On: Enables the adjustment of the subwoofer level. Off (Default) : Disables the adjustment of the subwoofer level. o Subwoofer 1 Level /Subwoofer 2 Level These setting[...]

o Loudness Management This sets whether to output as specified in “Dynamic Compression” or output directly without compressing the dynamic range of audio recorded in the disc. On (Default) : Outputs are given based on enabling the settings made in “Dynamic Compression” and “Dialog normalization function” ( v p. 243). Off: “Dynamic Com[...]

o Center Gain Distributes the dialogue output from the center channel to the front left and right channels and widens the sound image in the front. 0.0 – 1.0 0 You can set this when the sound mode is set to DTS Neo:X. 0 The smaller the value, the more dialogue is concentrated on the center channel. The larger the value, the more dialogue is distr[...]

o Room Size Determine size of acoustic environment. Small: Simulate acoustics of a small room. Medium small: Simulate acoustics of a medium-small room. Medium (Default) : Simulate acoustics of a medium room. Medium large: Simulate acoustics of a medium-large room. Large: Simulate acoustics of a large room. “Room Size” does not indicate the size[...]

o Speaker Select Makes settings for the speakers outputting sound. n When the sound mode is “DTS Neo:X”. Surround Back: Sound is output from the surround back speakers. Height: Sound is output from the front height speakers. Wide: Sound is output from the front wide speakers. Back/Height: Sound is output from the surround back and front height [...]

Restorer Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The “Restorer” function generates the signals eliminated upon compression, restoring the sound to conditions near those of the original sound before compressi[...]

Audio Delay Compensates for incorrect timing between video and audio. 0 ms – 200 ms (Default : 0 ms) 0 Audio Delay for game mode can be set when “Video Mode” is set to “Auto” or “Game”. ( v p. 183) 0 “Audio Delay” settings are stored for each input source. Volume Set the MAIN ZONE (room where the unit is located) volume setting. o[...]

Audyssey Set Audyssey MultEQ ® XT32, Audyssey Dynamic EQ ® , Audyssey Dynamic Volume ® and Audyssey LFC™. These can be selected after Audyssey ® Setup has been performed. For additional information on Audyssey technology, please see “Explanation of terms” ( v p. 295). 0 “MultEQ ® XT32”, “Dynamic EQ”, “Reference Level Offset”,[...]

o Dynamic EQ Solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Works with MultEQ ® XT32. On (Default) : Use Dynamic EQ. Off: Do not use Dynamic EQ. When the menu “Dynamic EQ” setting is “On”, it is not possible to do “Tone Control” adjustment. ( v p. 124[...]

o Dynamic Volume Solves the problem of large variations in volume level between TV, movies and other content (between quiet passages and loud passages, etc.) by automatically adjusting to the user’s preferred volume setting. Heavy: Most adjustment to softest and loudest sounds. Medium: Medium adjustment to loudest and softest sound. Light: Least [...]

o Audyssey DSX ® Provides more immersive surround sound by adding the new channels. Wide: Turn on Audyssey DSX ® processing for front wide channel expansion. Height: Turn on Audyssey DSX ® processing for front height channel expansion. Wides/Heights: Turns on Audyssey DSX ® processing for front wide and front height channel expansion. Off (Defa[...]

Graphic EQ Uses the graphic equalizer to adjust the tone of each speaker. 0 Speakers for which “Graphic EQ” can be set differ according to the sound mode. 0 This can be set when the “MultEQ ® XT32” is set to “Off”. ( v p. 171) 0 This cannot be set when the sound mode is set to “Direct” or “Pure Direct”. o Graphic EQ Set whether[...]

o Curve Copy Copy the Flat correction curve created in the Audyssey ® Setup. “Curve Copy” is displayed after Audyssey ® Setup has been performed. o Set Defaults The “Graphic EQ” settings are returned to the default settings. Contents Connections Playback Settings Tips Appendix 176 Front panel Display Rear panel Remote Index[...]

Video Make video-related settings. Picture Adjust Picture quality can be adjusted. 0 Can be set when the “Video Conversion” setting is “On”. ( v p. 184) 0 Can be set when “HDMI”, “COMP” or “VIDEO” is assigned for each input source. ( v p. 191) 0 “Contrast”, “Brightness”, “Saturation”, “Noise Reduction” and “Enh[...]

0 The two special adjustment modes, ISF Day and ISF Night, should be used by a certified technician to adjust the color calibration to match the installation conditions. We recommend that the settings and adjustments be carried out by an ISF- certified technician. 0 These settings can also be configured using “Picture Mode” in the option menu. [...]

o Noise Reduction Reduce overall video noise. Low / Medium / High / Off (Default : Off) o Enhancer Emphasize picture sharpness. 0 – +12 (Default : 0) HDMI Setup Make settings for HDMI video/audio output. NOTE When “HDMI Pass Through” and “HDMI Control” is set to “On”, it consumes more standby power. If you are not using this unit for [...]

o HDMI Audio Out Select HDMI audio output device. AVR (Default) : Play back through speakers connected to the unit. TV: Play back through TV connected to the unit. 0 When the HDMI control function is activated, priority is given to the TV audio setting. (“HDMI control function” ( v p. 143)) 0 When the power of this unit is on and “HDMI Audio [...]

o HDMI Pass Through Selects how this unit will transmit HDMI signals to the HDMI output in standby power mode. On: Transmits the selected HDMI input through the AV receiver’s HDMI output when this unit is in standby power mode. Off (Default) : No HDMI signals are transmitted through this unit’s HDMI output in standby power mode. o HDMI Control [...]

o Pass Through Source Sets the HDMI connector that inputs HDMI signals when in standby. Last (Default) : The most recently used input source will go into standby mode. CBL/SAT / DVD / Blu-ray / Game / AUX1 / AUX2 / Media Player / CD z : Pass through the selected input source. z “Pass Through Source” can be set when any of the HDMI connectors is[...]

Output Settings Makes settings for video output. 0 Can be set when “HDMI”, “COMP” or “VIDEO” ( v p. 191) is assigned for each input source. 0 “Resolution”, “Progressive Mode” and “Aspect Ratio” can be set when “i/p Scaler” is set to anything other than “Off”. 0 “Output Settings” cannot be set when 4K signals are [...]

o Video Conversion The input video signal is converted automatically in conjunction with the connected TV. (“Video conversion function” ( v p. 281)) On (Default) : The input video signal is converted. Off: The input video signal is not converted. o i/p Scaler Set the video input signal to be subjected to i/p scaler processing. i/p Scaler will c[...]

n When the input source is set to “iPod/USB” and “Online Music” On (Default) : Use i/p scaler function. Off: Do not use i/p scaler function. 0 “Analog & HDMI” can be set for input sources for which an HDMI input connector is assigned. 0 Which items can be set depend on the input source assigned to each input connector. 0 This functi[...]

o Progressive Mode Set an appropriate progressive conversion mode for the source video signal. Auto (Default) : The video signal is automatically detected and the appropriate mode is set. Video: Select mode suitable for video playback. Video and Film: Select mode suitable for video and 30- frame film material playback. This item can be set when “[...]

Component Video Out Set the zone to which the component video output connector is assigned. MAIN ZONE (Default) : Assigns the component video output connector to MAIN ZONE. ZONE2: Assigns the component video output connector to ZONE2. Contents Connections Playback Settings Tips Appendix 187 Front panel Display Rear panel Remote Index[...]

On Screen Display Select the on-screen display user interface preferences. o Volume Sets where to display the volume level. Bottom (Default) : Display at the bottom. Top: Display at the top. Off: Turn display off. When the master volume display is hard to see when superimposed text (closed captioning) or movie subtitles are present, set to “Top?[...]

TV Format Set the video signal format to be output for the TV you are using. o Format PAL (Default) : Select PAL output. NTSC: Select NTSC output. “Format” can also be set by the following procedure. However, the menu screen is not displayed. Following the display content to make the setting. 1. Press and hold the main unit’s o and p at the s[...]

Inputs Perform settings related to input source playback. You do not have to change the settings to use the unit. Make settings when needed. Input Assign By making connections as indicated by the input sources printed on the audio/video input connectors of this unit, you can just press one of the input source select buttons to easily play back audi[...]

o HDMI Set this to change the HDMI input connectors assigned to the input sources. 1 / 2 / 3 / 4 / 5 / 6 / 7 / Front: Assign an HDMI input connector to the selected input source. – : Do not assign an HDMI input connector to the selected input source. When “HDMI Control” is set to “On” in the menu, “HDMI” cannot be assigned to “TV Au[...]

Source Rename Change the display name for input source. This is convenient when the name of your device and the input source name of this unit are different. You can change the name to suit your needs. When the renaming is completed, the name is displayed on this unit’s display and on the menu screen. CBL/SAT / DVD / Blu-ray / Game / AUX1 / AUX2 [...]

Input Select Set the audio input mode and decode mode of each input source. The input modes available for selection may vary depending on the input source. “Input Select” settings are stored for each input source. o Input Mode Set the audio input modes for the different input sources. It is normally recommended to set the audio input mode to ?[...]

Speakers The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey ® Setup”. You do not have to perform Audyssey ® Setup when you have already performed “Speaker Calibration” in “Setup Assistant”. To set up the speakers manually, use[...]

o About the main listening position The main listening position is the position where listeners would normally sit or where one would normally sit alone within the listening environment. Before starting Audyssey ® Setup, place the Sound calibration microphone in the main listening position. Audyssey MultEQ ® XT32 uses the measurements from this p[...]

Procedure for speaker settings (Audyssey ® Setup) . Finish Check Calculation & Store Measurement Preparation 1 Attach the Sound calibration microphone to the supplied microphone stand or own tripod and install it at the main listening position. When installing the Sound calibration microphone, point the tip of the microphone toward the ceiling[...]

3 Connect the Sound calibration microphone to the SETUP MIC jack of this unit. . When the Sound calibration microphone is connected, the follo wing screen is display ed. . Audyssey Setup Channel Select Amp Assign Check Results Restore... Start Your AV receiver can automatically measure the acoustics of your room then optimize your speakers using th[...]

6 When the following screen is displayed, select “Begin Test” and then press ENTER. Start the measurement of the first position. . Begin Test Back Select “Begin Test” to start the calibration. NOTE: You will hear a series of loud chirps starting and stopping during the tests. Ear Height Audyssey Setup 0 Measurement requires several minutes.[...]

8 Move the Sound calibration microphone to position 2, select “Continue”, then press ENTER. The measurement of the second position starts. Measurements can be made in up to eight positions. . Complete Continue Place the microphone ear level at the 2nd listening position, which should be no more than 60cm away from the 1st position, then select [...]

11 Perform the settings for Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® . The following screen is displayed during the analysis. Configure the settings as preferred. . Audyssey Setup Audyssey Dynamic EQ maintains bass, clarity and surround sound at low volumes letting you enjoy late-night movies and television. Turn on the Dynamic EQ? Yes[...]

13 Select “Details” and press ENTER to verify the measurement results. 0 Subwoofers may measure a greater reported distance than the actual distance due to added electrical delay common in subwoofers. NOTE Do not change the speaker connection or subwoofer volume after Audyssey ® Setup. If these are changed, run Audyssey ® Setup again in order[...]

Error messages An error message is displayed if Audyssey ® Setup could not be completed due to speaker placement, the measurement environment, etc. If an error message is displayed, check the relevant items and perform the necessary measures. Be sure to turn off the power before checking speaker connections. Examples Error details Measures No spea[...]

o Subwoofer level error message and how to adjust The optimal level of each subwoofer channel for Audyssey ® Setup measurement is 75 dB. During subwoofer level measurement, an error message is displayed when one level of subwoofers is outside the 72 – 78 dB range. When using a subwoofer with built-in amplifier (active type), adjust the subwoofer[...]

Retrieving Audyssey ® Setup settings If you set “Restore...” to “Restore”, you can return to Audyssey ® Setup measurement result (value calculated at the start by MultEQ ® XT32) even when you have changed each setting manually. . Audyssey Setup Channel Select Amp Assign Check Results Restore... Start Your AV receiver can automatically me[...]

Manual Setup Perform when setting the speakers manually or when changing settings made in Audyssey ® Setup. 0 If you change the speaker settings after performing Audyssey ® Setup, you will no longer be able to select Audyssey MultEQ ® XT32, Audyssey Dynamic EQ ® or Audyssey Dynamic Volume ® . ( v p. 171 - 172) 0 This unit can be used without c[...]

7.1ch + ZONE2: 0 Setting to assign the power amplifiers in this unit for ZONE2 to 2-channels. 0 You can connect speakers for up to 9.1 channels for MAIN ZONE. Speakers to output audio are automatically switched for playing back up to 7.1-channels in accordance with the input signal and sound mode. ( v p. 213) 7.1ch + ZONE3: 0 Setting to assign the [...]

9.1ch/ 2ch Front: 0 Setting to assign the power amplifiers in this unit for connecting 2-channel playback speakers to 2 channels. 0 You can switch the front speakers when using 2-channel playback in direct mode or stereo mode, or when using multi-channel surround playback. ( v p. 217) When setting speakers for 2-channel playback, also perform the ?[...]

o Detailed settings when “Assign Mode” is set to “11.1ch” When “Assign Mode” is set to “11.1ch”, set the following items. n Height Speakers Select the number of the height speakers used in MAIN ZONE. 2 Height Speakers (Default) : Uses a set of (two) height speakers. 4 Height Speakers : Uses two sets of (four) height speakers. Using [...]

G When “Height Speakers” is set to “Using Dolby Speakers” H Select the height channels used for the two pair. AUDIO OUT connectors Select items HEIGHT1 HEIGHT2 Front Dolby (Default) Front Dolby Not assigned. Surround Dolby Surround Dolby Not assigned. Back Dolby Back Dolby Not assigned. Front Dolby & Top Rear Front Dolby Top Rear Front [...]

n Pre-out Selects the PRE OUT connectors that connect the external power amplifier used in MAIN ZONE. G When “Height Speakers” is set to “2 Height Speakers” H Front: The front left and right pre-amp outputs are connected to an external amplifier. Front Height z : The HEIGHT1 left and right pre-amp outputs are connected to an external amplif[...]

G When “Height Speakers” is set to “Using Dolby Speakers” H Available settings differ depending on the “Height Layout” and “Wide/ Height2” settings. Front: The front left and right pre-amp outputs are connected to an external amplifier. Front Dolby z : The HEIGHT1 left and right pre-amp outputs are connected to an external amplifier[...]

n Height Layout Select the type of the height speakers used. This can be selected when the “Height Speakers” setting is “2 Height Speakers”, “4 Height Speakers” or “Using Dolby Speakers”. G When “Height Speakers” is set to “2 Height Speakers” H Select the height channel used. AUDIO OUT connectors Select items HEIGHT1 Front H[...]

o Detailed settings when “Assign Mode” is set to “7.1ch + ZONE2” When “Assign Mode” is set to “7.1ch + ZONE2”, set the following items. n Speakers for ZONE2 Select speaker terminals that output audio in ZONE2. The channels of speaker terminals selected for ZONE2 cannot be output in MAIN ZONE. FRONT WIDE/ HEIGHT2 (Default) : Outputs [...]

o Detailed settings when “Assign Mode” is set to “7.1ch + ZONE3” When “Assign Mode” is set to “7.1ch + ZONE3”, set the following items. n Speakers for ZONE3 Select speaker terminals that output audio in ZONE3. The channels of speaker terminals selected for ZONE3 cannot be output in MAIN ZONE. FRONT WIDE/ HEIGHT2 (Default) : Outputs [...]

o Detailed settings when “Assign Mode” is set to “7.1ch + ZONE2/3-MONO” When “Assign Mode” is set to “7.1ch + ZONE2/3-MONO”, set the following items. n Speakers for ZONE2/3 Select speaker terminals that output audio in ZONE2 and ZONE3. The channels of speaker terminals selected for ZONE2/ZONE3 cannot be output in MAIN ZONE. FRONT WI[...]

o Detailed settings when “Assign Mode” is set to “7.1ch (Bi-Amp)” When “Assign Mode” is set to “7.1ch (Bi-Amp)”, set the following items. n Speakers for Bi-Amp Select the speaker terminals used for the bi-amp connection of front speakers. The channels of speaker terminals selected for the bi-amp cannot be output in MAIN ZONE. FRONT [...]

o Detailed settings when “Assign Mode” is set to “9.1ch/2ch Front” When “Assign Mode” is set to “9.1ch/2ch Front”, set the following items. n Speakers for 2ch Select the speaker terminals that connect the front speakers exclusively used for 2-channel playback. FRONT WIDE/ HEIGHT2 (Default) : Connect the front speakers exclusively us[...]

o Detailed settings when “Assign Mode” is set to “7.1ch + Front B” When “Assign Mode” is set to “7.1ch + Front B”, set the following items. n Speakers for Front B Select the speaker terminals used for the front speakers of the second unit. FRONT WIDE/ HEIGHT2 (Default) : Connect the front speakers of the second unit to the FRONT WID[...]

o Detailed settings when “Assign Mode” is set to “Dolby Atmos” When “Assign Mode” is set to “Dolby Atmos”, set the following items. n Layout Select the speaker layout for Dolby Atmos playback. 7.1ch + 4 Height: This is a layout that adds the top front and top rear speakers to the 7.1 channel layout which includes the surround back c[...]

Speaker Config. Select whether or not speakers are present, playback capacity for low bass frequencies and speaker size. o Front Set the front speaker size. Large (Default) : Use a large speaker that can adequately play back very low bass frequencies. Small: Use a small speaker that has inadequate playback capacity for very low bass frequencies. 0 [...]

o Surr. Back Set the presence, size and number of surround back speakers. Large: Use a large speaker that can adequately play back very low bass frequencies. Small (Default) : Use a small speaker that has inadequate playback capacity for very low bass frequencies. None: Select when the surround back speakers are not connected. 2 spkrs (Default) : U[...]

o Top Front Set the presence and size of the top front speakers. Large: Use a large speaker that can adequately play back very low bass frequencies. Small (Default) : Use a small speaker that has inadequate playback capacity for very low bass frequencies. None: Select when the top front speakers are not connected. o Top Middle Set the presence and [...]

o Front Dolby Set the presence and size of the front Dolby speakers. Large: Use a large speaker that can adequately play back very low bass frequencies. Small (Default) : Use a small speaker that has inadequate playback capacity for very low bass frequencies. None: Select when the front Dolby speakers are not connected. o Surround Dolby Set the pre[...]

Distances Set distance from listening position to speakers. Measure beforehand the distance from the listening position to each speaker. o Unit Set the unit of distance. Meters (Default) Feet o Step Set the minimum variable width of the distance. 0.1 m (Default) / 0.01 m 1 ft / 0.1 ft o Set Defaults The “Distances” settings are returned to the [...]

Levels Set the volume of the test tone to be the same at the listening position when it is output from each speaker. o Test Tone Start A test tone is output from the selected speaker. While listening to the test tone, adjust the volume output from the selected speaker. –12.0 dB – +12.0 dB (Default : 0.0 dB) 0 The set “Levels” are reflected [...]

Crossovers Set in accordance with the lower limit frequency of the base frequencies that can be played back through each speaker. See the speaker manual for information concerning speaker crossover frequency. o Speaker Selection Selects how to set the crossover frequency. All (Default) : Sets the same crossover frequency for all speakers. Individua[...]

Bass Set subwoofer and LFE signal range playback. o Subwoofer Mode Select low range signals to be reproduced by subwoofer. LFE (Default) : The low range signal of the channel set to “Small” speaker size is added to the LFE signal output from the subwoofer. LFE+Main: The low range signal of all channels is added to the LFE signal output from the[...]

Front Speaker Set the front speaker A/B to use for every sound mode. A (Default) : Front speaker A is used. B : Front speaker B is used. A+B : Both front speakers A and B are used. This can be set when “Assign Mode” is set to “7.1ch + Front B”. ( v p. 205) 2ch Playback Select the method for setting the speakers used in the 2-channel direct [...]

o Front Set the size of the front speakers for 2-channel playback. Large (Default) : Use a large speaker that can adequately play back very low bass frequencies. Small: Use a small speaker that has inadequate playback capacity for very low bass frequencies. When “Speaker Config.”-“Subwoofer” in the menu is set to “None”, “Large” is [...]

o Crossover Set the maximum frequency of the bass signal output from each channel to the subwoofer. 40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz / 200 Hz / 250 Hz (Default : 80 Hz) 0 This can be set when “2ch Playback”-“Subwoofer” is set to “Yes”. 0 When “2ch Playback”-“Front” is set to “Large” and “SW[...]

Network To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network (LAN) via DHCP, set “DHCP” to “On”. (Use the default setting.) This allows this unit to use your home network (LAN). When assigning an IP address to each device manually, you need to assign an IP address to[...]

Wi-Fi Setup Connect to a wireless LAN (Wi-Fi) router. The router can be connected in the following ways. Select the connection method to suit your home environment. o Scan Networks Select the network you wish to connect to from the list of possible networks shown on the TV screen. 1. Select the network you wish to connect to from the list of wirele[...]

o WPS Router Use a WPS-compatible router to connect. There are two ways to connect, using the push button method or the PIN code method. Select the connection method to match your router. n When connecting using the push button method 1. Select “Push Button” on the TV screen. 2. Switch to the WPS mode by pressing the WPS button of the router yo[...]

Settings Configure the proxy settings and IP address. 0 If you are using a broadband router (DHCP function), the information required for network connection such as the IP address will be automatically configured since the DHCP function is set to “On” in the default settings of this unit. 0 Set up the IP Address, Subnet Mask, Default Gateway an[...]

o Proxy Make this setting when connecting to the Internet via a proxy server. Make the proxy settings only when you connect to the Internet via a proxy server that is on your internal network or provided by your provider, etc. On(Address): Select when inputting by address. On(Name): Select when inputting by domain name. Off (Default) : Disables the[...]

Friendly Name The Friendly Name is the name of this unit displayed on the network. You can change the Friendly Name according to your preferences. o Friendly Name Selects Friendly Name from the list. When you select “Other”, you can change the Friendly Name according to your preferences. Home Theater / Living Room / Family Room / Guest Room / K[...]

Maintenance Mode Use when receiving maintenance from a Denon service engineer or custom installer. Ordinarily, this mode isn’t suitable for use by the end user, only by a trained service technician or custom installation professional. NOTE Only use this function if so instructed by a Denon serviceperson or installer. Contents Connections Playback[...]

General Make various other settings. Language Set the language for display the menu on the TV screen. English / Deutsch / Français / Italiano / Español / Nederlands / Svenska / Pусский / Polski (Default : English) “Language” can also be set up by the following operation. However, the menu screen is not displayed. Watch the display while[...]

o Power On Default Set the mode to ECO when the power is on. Last (Default) : The ECO Mode will be set to the previous setting before the power was switched off. On: When power is turned on, the mode will always be switched to the ECO Mode in “On”. Auto: When power is turned on, the mode will always be switched to the ECO Mode in “Auto”. Of[...]

ZONE2 Setup / ZONE3 Setup Makes settings for audio playback with ZONE2 and ZONE3. Values set for “Volume Limit” and “Power On Volume” are displayed according to the setting specified for the volume “Scale”. ( v p. 170) o Bass Adjust bass. -10 dB – +10 dB (Default : 0 dB) o Treble Adjust treble. -10 dB – +10 dB (Default : 0 dB) o Hig[...]

o Volume Level Set the volume output level. Variable (Default) : Volume can be adjusted. 1 – 98 (–79.5 dB – 18.0 dB): Volume is fixed at the desired level. The volume cannot be adjusting using the remote control unit. o Volume Limit Make a setting for maximum volume. 60 (-20 dB) / 70 (-10 dB) / 80 (0 dB) (Default : 70 (-10 dB)) Off: Do not se[...]

Zone Rename Change the display title of each zone to one you prefer. MAIN ZONE / ZONE2 / ZONE3 Set Defaults: The default setting is restored for the edited zone name. Up to 10 characters can be input. For character input, see “Using the keyboard screen” ( v p. 163). Quick Select Names Change the quick select name that appears on the TV screen t[...]

Front Display Makes settings related to the display on this unit. o Dimmer Adjust the display brightness of this unit. Bright (Default) : Normal display brightness. Dim: Reduced display brightness. Dark: Very low display brightness. Off: Turns the display off. You can also adjust the display by pressing DIMMER on the main unit. o Channel Indicators[...]

o Video Show the HDMI input/output signals and HDMI monitor information for MAIN ZONE. HDMI Signal Info. Resolution / Color Space / Pixel Depth HDMI Monitor 1 / HDMI Monitor 2 Interface / Resolutions o ZONE Show information about current settings. MAIN ZONE: This item shows information about settings for MAIN ZONE. The information displayed differs[...]

Usage Data To help us improve our products and customer service, Denon collects anonymous information about how you use your AV receiver (such as frequently used input sources and sound modes and speaker settings). Denon will never provide any information we collect to third parties. Yes: Provide information on the operating status of this unit. No[...]

Firmware Checks for the latest firmware information about updates and upgrades, updates the firmware, and sets up the notification message display for updates and upgrades. o Update Updates the firmware of this unit. Check for Update: Checks to see if the firmware is the latest version. You can also check approximately how long it will take to comp[...]

o Add New Feature Display new features that can be downloaded to this unit and perform an upgrade. Upgrade Package: Display the items to be upgraded. Upgrade Status: Display a list of the additional functions provided by the upgrade. Upgrade Start: Execute the upgrade process. When the upgrade starts, the menu screen is shut down. During the upgrad[...]

Setup Lock Protect settings from inadvertent changes. o Lock On: Turn protection on. Off (Default) : Turn protection off. When cancelling the setting, set “Lock” to “Off”. NOTE When “Lock” is set to “On”, no setting items are displayed except for “Setup Lock”. Contents Connections Playback Settings Tips Appendix 248 Front panel [...]

Operating external devices with the remote control unit . SOUND MODE SOUN D MOD E POWER POWE R AVR CONTROL AVR CON TROL QUICK SELECT QUICK SELECT PURE PU RE MOVIE MO VI E GAME GA ME MUSIC MU SI C INTE RNET R ADIO ADIO iPo iPo d/ USB USB VOLUME VO LUM E MENU MEN U Z  2 Z 3 Z 3 1 2 3 4 ENTER ENTE R +10 +1 0 GHI G H I JKL J K L MNO M N O PQRS P Q R[...]

Registering preset codes There are two methods for registering preset codes; the simple method for registering preset codes of Denon players, and the method for registering the preset numbers of other manufacturers’ devices. ● “Registering Denon Players”( v p. 250 ） ● “Registering by entering preset numbers”( v p. 251 ） o Register[...]

n Registering multiple players at the same time 1 Press and hold down QUICK SELECT 1 – 4 and OPTION until the DEV, TV and AVR indicators on the remote are flashing green, then release. Devices to be registered at the same time Press and hold down the buttons Blu-ray Disc player DVD player CD player P P QUICK SELECT 1 and OPTION P P QUICK SELECT 2[...]

Operating devices To operate an external device, press the input source button registered with the preset code, followed by one of the buttons in the following tables. 0 The “DEV.” indicator lights when an external device is being operated. 0 The “TV” indicator lights when the TV is being operated. 0 To operate the menu of this unit, press [...]

n TV group (TV) operation Operation buttons Function TV X TV power on/off TV INPUT Switch TV input TV MENU TV menu CH/PAGE df Switch channels (up/down) INFO Information OPTION Sub menu, Option u i o p Cursor operation ENTER (Cursor) Enter BACK Back SETUP Setup 8 9 Skip chapter 1 Playback 6 7 Fast-reverse / Fast-forward 3 Pause 2 Stop 0 – 9, +10 C[...]

n BD/DVD group (Blu-ray Disc player/HD-DVD player/DVD player/DVD recorder) operation Operation buttons Function DEVICE X Power on/off DEVICE MENU (Popup) Menu CH/PAGE df Switch channels (up/down) INFO Information OPTION Top menu u i o p Cursor operation ENTER Enter BACK Back SETUP Setup, Home menu 8 9 Skip chapter 1 Playback 6 7 Fast-reverse / Fast[...]

Initializing registered preset codes 1 Press and hold down MAIN and OPTION until the DEV, TV and AVR indicators on the remote are flashing green, then release. Specifying the operating zone with the remote control To prevent accidental misuse, you can set the zone for which the remote control unit is used. 1 Press and hold down either MAIN, Z2 or Z[...]

o Contents Tips I want the volume not to become too loud by mistake 257 I want to keep the volume at the same level when I turn the power on 257 I want to have the subwoofer always output audio 257 I want to make human voices in the movies clearer 257 I want to keep bass and clarity during playback at a lower volume level 257 I want to automaticall[...]

Tips I want the volume not to become too loud by mistake 0 Set the volume upper limit for “Volume Limit” in the menu beforehand. This prevents children or others from increasing the volume too much by mistake. You can set this for each zone. ( v p. 170, 241) I want to keep the volume at the same level when I turn the power on 0 By default, the [...]

I want to set the optimized listening environment after changing the configuration/position of the speakers or changing a speaker to a new one. 0 Perform Audyssey ® Setup. This automatically makes the optimized speaker settings for the new listening environment. ( v p. 194) I want to combine a desired video with the current music 0 Set “Video Se[...]

Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the corresponding symptoms in this section. If the symptoms do not match any of those desc[...]

o Power does not turn on / Power is turned off Symptom Cause / Solution Page Power does not turn on. 0 Check whether the power plug is correctly inserted into the power outlet. 73 Power automatically turns off. 0 The sleep timer is set. Turn on the power again. 144 0 “Auto Standby” is set. “Auto Standby” is triggered when there is no operat[...]

o Operations cannot be performed through the remote control unit Symptom Cause / Solution Page Operations cannot be performed through the remote control unit. 0 Batteries are worn out. Replace with new batteries. 9 0 Operate the remote control unit within a distance of about 7 m from this unit and at an angle of within 30°. 9 0 Remove any obstacle[...]

o No sound comes out Symptom Cause / Solution Page No sound comes out of speakers. 0 Check the connections for all devices. 35 0 Insert connection cables all the way in. － 0 Check that input connectors and output connectors are not reversely connected. － 0 Check cables for damage. － 0 Check that speaker cables are properly connected. Check th[...]

o Desired sound does not come out Symptom Cause / Solution Page The volume does not increase. 0 The maximum volume is set too low. Set the maximum volume using “Limit” on the menu. 170 0 Appropriate volume correction processing is performed according to the input audio format and settings, so the volume may not reach the upper limit. － No sou[...]

Symptom Cause / Solution Page DTS Neo:X mode cannot be selected. 0 It cannot be selected when “Speaker Config.” - “Surround” is set for “None”. 220 0 DTS Neo:X cannot be selected when using the headphones. － Dolby Surround mode cannot be selected. 0 Dolby Surround cannot be selected when using the headphones. － Audyssey MultEQ ® XT[...]

o Sound is interrupted or noise occurs Symptom Cause / Solution Page During playback from the Internet radio or USB memory device, sound is occasionally interrupted. 0 When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted. － 0 The network communication speed is slow or the radio station is busy. － When [...]

o No video is shown on the TV Symptom Cause / Solution Page No picture appears. 0 Check the connections for all devices. 56 0 Insert connection cables all the way in. － 0 Check that input connectors and output connectors are not reversely connected. － 0 Check cables for damage. － 0 Match the input settings to the input connector of the TV con[...]

Symptom Cause / Solution Page When using HDMI ZONE2, the video output in MAIN ZONE is interrupted. 0 When ZONE2 is operated with the same input source selected for MAIN ZONE and ZONE2, video in MAIN ZONE may be interrupted. － Contents Connections Playback Settings Tips Appendix 267 Front panel Display Rear panel Remote Index[...]

o The menu screen is not displayed on the TV Symptom Cause / Solution Page The menu screen or status information screen is not displayed on the TV. 0 The menu screen is only displayed on this unit and a TV connected with an HDMI cable. If this unit is connected to a TV using a different video output connector, operate while watching the display on [...]

o iPod cannot be played back Symptom Cause / Solution Page iPod cannot be connected. 0 When using iPod by connecting it to the USB port, some iPod variations are not supported. 65 0 When iPod is connected by using a USB cable other than the genuine cable, iPod may not be recognized. Use a genuine USB cable. － The AirPlay icon ' is not displa[...]

o USB memory devices cannot be played back Symptom Cause / Solution Page “No connection” is displayed. 0 This unit cannot recognize the USB memory device. Disconnect and reconnect the USB memory device. 65 0 Mass storage class compatible USB memory devices are supported. － 0 This unit does not support a connection through a USB hub. Connect t[...]

o File names on the iPod/USB memory device are not displayed properly Symptom Cause / Solution Page The file names are not displayed properly (“...”, etc.). 0 Characters that cannot be displayed have been used. On this unit, characters that cannot be displayed are replaced with a “. (period)”. － o Bluetooth cannot be played back Symptom C[...]

o The Internet radio cannot be played back Symptom Cause / Solution Page A list of broadcasting stations is not displayed. 0 The LAN cable is not properly connected, or the network is disconnected. Check the connection status. 69 0 Perform the network diagnostic mode. － Internet Radio cannot be played. 0 The selected radio station is broadcasting[...]

o Music files on PC or NAS cannot be played back Symptom Cause / Solution Page Files stored on a computer cannot be played. 0 Files are stored in a non-compatible format. Record in a compatible format. 285 0 Files that are copyright protected cannot be played on this unit. － 0 The set’s USB port cannot be used for connection to a computer. － [...]

o The HDMI control function does not work Symptom Cause / Solution Page The HDMI control function does not work. 0 Check that “HDMI Control” in the menu is set to “On”. 181 0 You cannot operate devices that are not compatible with the HDMI control function. In addition, depending on the connected device or the settings, the HDMI control fun[...]

o Cannot connect to a wireless LAN network Symptom Cause / Solution Page Cannot connect to the network. 0 The network name (SSID), password and encryption setting have not been set up correctly. Configure the network settings according to the setting details of this unit. 233 0 Shorten the distance from the wireless LAN access point and remove any [...]

o When using HDMI ZONE2, the devices does not function properly Symptom Cause / Solution Page When using MAIN ZONE, video output is interrupted in HDMI ZONE2. 0 With the same input source selected for MAIN ZONE and ZONE2, when you operate MAIN ZONE, video may be interrupted in HDMI ZONE2. － When using HDMI ZONE2, no video or audio is output from [...]

Resetting factory settings Perform this procedure if the display is abnormal or if operations cannot be performed. Various settings are reset to the factory default values. Make settings again. . X BACK INFO 1 Turn off the power using X . 2 Press X while simultaneously pressing INFO and BACK. 3 Remove your fingers from the two buttons when “Initi[...]

About HDMI HDMI is an abbreviation of High-Definition Multimedia Interface, which is an AV digital interface that can be connected to a TV or amplifier. With the HDMI connection, high definition video and high quality audio formats adopted by Blu-ray Disc players (Dolby Digital Plus, Dolby TrueHD, DTS-HD, DTS-HD Master Audio) can be transmitted, wh[...]

0 Auto Lip Sync This function can automatically correct delay between the audio and video. Use a TV that is compatible with the Auto Lip Sync function. 0 HDMI Pass Through Even when the power to this unit is set to standby, signals input from the HDMI input connector are output to a TV or other device that is connected to the HDMI output connector.[...]

o Supported audio formats 2-channel Linear PCM 2-channel, 32 kHz – 192 kHz, 16/20/24 bit Multi-channel Linear PCM 7.1-channel, 32 kHz – 192 kHz, 16/20/24 bit Bitstream Dolby Digital / DTS / Dolby Atmos / Dolby TrueHD / Dolby Digital Plus / DTS-HD Master Audio / DTS-HD High Resolution Audio / DTS Express DSD 2-channel – 5.1-channel, 2.8224 MHz[...]

Video conversion function This unit automatically converts the input video signals as shown in the diagram before outputting them to the TV. The main zone video conversion function is compatible with the following formats: NTSC, PAL, SECAM, NTSC4.43, PAL-N, PAL-M and PAL-60. HDMI-compatible TV Output (MONIT OR OUT) Input (IN) Video signal Video sig[...]

This unit can convert the input video signals to the resolution that is set for “Resolution” in the menu before outputting them to the TV. ( v p. 185) Output signal Input signal HDMI 480i/576i 480p/576p 720p 1080i 1080p 1080p 24Hz 4K 30/25/24Hz 4K 60/50Hz HDMI 480i/576i P P P P P P P P 480p/576p P P P P P P P 720p P P P P P P 1080i P P P P P P [...]

Playing back a USB memory devices 0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. 0 This unit can show the artwork that was embedded by using MP3 ID3-Tag Ver. 2.3 or 2.4. 0 This unit is compatible with WMA META tags. 0 If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/MP3/WAV/FLAC) or 349 × 349 (MPEG-4 AAC), then[...]

o Maximum number of playable files and folder The limits on the number of folders and files that can be displayed by this unit are as follows. Media Item USB memory device Memory capacity FAT16 : 2 GB, FAT32 : 2 TB Number of folder directory levels z 1 8 levels Number of folders 500 Number of files z 2 5000 z 1 The limited number includes the root [...]

Playing back a file saved on a PC or NAS 0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. 0 This unit can show the artwork that was embedded by using MP3 ID3-Tag Ver. 2.3 or 2.4. 0 This unit is compatible with WMA META tags. 0 If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/MP3/WAV/FLAC) or 349 × 349 (MPEG-4 AAC[...]

Playing back Internet Radio o Playable broadcast station specifications Sampling frequency Bit rate Extension WMA 32/44.1/48 kHz 48 – 192 kbps .wma MP3 32/44.1/ 48 kHz 32 – 320 kbps .mp3 MPEG-4 AAC 32/44.1/48 kHz 16 – 320 kbps .aac/ .m4a/ .mp4 Personal memory plus function The most recently used settings (input mode, HDMI output mode, sound m[...]

Sound modes and channel output S This indicates the audio output channels or surround parameters that can be set. D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.” ( v p. 220). . Sound mode Channel output Front L/R Center Surround L/R Surround back L/R Front wide L/R Front height L/R Top[...]

z 1 The applicable sound mode includes “Dolby Surround” and sound modes that have “+Dolby Surround” in the sound mode name. z 2 The applicable sound mode includes “DTS Neo:X” and sound modes that have “+Neo:X” in the sound mode name. z 3 A signal for each channel contained in an input signal is output as audio. z 4 Audio is not outp[...]

Sound modes and surround parameters . Sound mode Surround Parameter Subwoofer Level Adjust Cinema EQ Loudness Management z 1 Dynamic Compression z 2 Low Frequency Effects z 3 Delay Time Effect Level Room Size Speaker Select Direct/Pure Direct (2-channel) z 4 S z 5 SS Direct/Pure Direct (Multi-channel) z 4 S SSS DSD Direct (2-channel) S z 5 DSD Dire[...]

. Sound mode Surround Parameter Dialog Enhancer Tone z 6 Audyssey Restorer z 9 Center Spread Center Gain MultEQ ® XT32 z 7 Dunamic EQ z 8 Dunamic Volume z 8 Audyssey LFC TM z 8 Audyssey DSX ® Direct/Pure Direct (2-channel) z 4 Direct/Pure Direct (Multi-channel) z 4 DSD Direct (2-channel) DSD Direct (Multi-channel) z 4 Stereo SSSSSS S Multi Ch In [...]

z 1 This item can be selected when the Dolby Digital, Dolby Digital Plus, Dolby TrueHD or Dolby Atmos signal is played back. z 2 This item can be selected when the Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos or DTS is played back. z 3 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played. z 4 During pl[...]

Types of input signals, and corresponding sound modes F This indicates the default sound mode. S This indicates the selectable sound mode. . Sound mode NOTE 2-channel signal Multi-channel signal Analog / PCM Dolby Digital (+/HD) DTS (-HD) DSD (Super Audio CD) PCM Multi DTS-HD DTS Express DTS ES Dscrt6.1 DTS ES Mtrx6.1 DTS Dolby Atmos Dolby TrueHD D[...]

. Sound mode NOTE 2-channel signal Multi-channel signal Analog / PCM Dolby Digital (+/HD) DTS (-HD) DSD (Super Audio CD) PCM Multi DTS-HD DTS Express DTS ES Dscrt6.1 DTS ES Mtrx6.1 DTS Dolby Atmos Dolby TrueHD Dolby Digital Plus Dolby Digital (EX) DSD (Super Audio CD) Multi Ch In Multi Ch In F F Multi Ch In + Dolby Surround S S Multi Ch In + Neo:X [...]

z 1 This item can be selected when surround back speakers are used. z 2 The “Cinema” mode, “Music” mode or “Game” mode can be selected. This item can be selected when using any of the surround back, front height or front wide speaker. z 3 This item can be selected when the input signal is DTS-HD Master Audio. z 4 This item can be select[...]

Explanation of terms o Audyssey Audyssey Dynamic EQ ® Dynamic EQ solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Audyssey Dynamic EQ ® works in tandem with Audyssey MultEQ ® XT32 to provide well-balanced sound for every listener at any volume level. Audyssey Dyn[...]

Audyssey Dynamic Volume ® Dynamic Volume solves the problem of large variations in volume level between television programs, commercials, and between the soft and loud passages of movies. Audyssey Dynamic EQ ® is integrated into Dynamic Volume so that as the playback volume is adjusted automatically, the perceived bass response, tonal balance, su[...]

Dolby Digital Dolby Digital is a multi-channel digital signal format developed by Dolby Laboratories. A total of 5.1-channels are played: 3 front channels (“FL”, “FR” and “C”), 2 surround channels (“SL” and “SR”) and the “LFE” channel for low frequency effects. Because of this, there is no crosstalk between channels and a re[...]

Dolby TrueHD Dolby TrueHD is a high definition audio technology developed by Dolby Laboratories, using lossless coding technology to faithfully reproduce the sound of the studio master. This format provides the facility to support up to 8 audio channels with a sampling frequency of 96 kHz/24 bit resolution and up to 6 audio channels with a sampling[...]

DTS-ES™ Discrete 6.1 DTS-ES™ Discrete 6.1 is a 6.1-channel discrete digital audio format adding a surround back (SB) channel to the DTS digital surround sound. Decoding of conventional 5.1-channel audio signals is also possible according to the decoder. DTS-ES™ Matrix 6.1 DTS-ES™ Matrix 6.1 is a 6.1-channel audio format that inserts a surro[...]

o Audio ALAC (Apple Lossless Audio Codec) This is a codec for lossless audio compression method developed by Apple Inc. This codec can be played back on iTunes, iPod or iPhone. Data compressed to approximately 60 – 70 % can be decompressed to exactly the same original data. FLAC (Free Lossless Audio Codec) FLAC stands for Free lossless Audio Code[...]

MPEG (Moving Picture Experts Group), MPEG-2, MPEG-4 These are the names for digital compression format standards used for the encoding of video and audio. Video standards include “MPEG-1 Video”, “MPEG-2 Video”, “MPEG-4 Visual”, “MPEG-4 AVC”. Audio standards include “MPEG-1 Audio”, “MPEG-2 Audio”, “MPEG-4 AAC”. WMA (Windo[...]

o Video ISF ISF (Imaging Science Foundation) is an organization that certifies video technicians who are then qualified to carry out calibration and adjustment to match the installation conditions. It also sets quality standards for the optimization of device video performance. Progressive (sequential scanning) This is a scanning system of the vide[...]

TKIP (Temporal Key Integrity Protocol) This is a network key used for WPA. The encryption algorithm is RC4, the same as for WEP, but the security level is increased by changing the network key used for encryption for each packet. vTuner This is a free online content server for Internet Radio. For inquiries about this service, visit the vTuner site [...]

Network Names (SSID: Security Set Identifier) When forming wireless LAN networks, groups are formed to prevent interference, data theft, etc. These groups are based on “SSID (network names)”. For enhanced security, a WEP key is set so that communication is unavailable unless both the “SSID” and the WEP key match. This is suitable for tempor[...]

o Others App Store App Store is a site that sells application software for such devices as the iPhone or iPod Touch, and is operated by Apple Inc. Denon Link HD Denon Link HD uses the clock of the AV amplifier connected by Denon Link HD to achieve HDMI signal transfer with low jitter. HDCP When transmitting digital signals between devices, this cop[...]

Trademark information . “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and r[...]

. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS-HD Master Audio and DTS Neo:X | 11.1 are a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved. . The terms HDMI and HDMI High-Definition Multimedia I[...]

Specifications o Audio section 0 Power amplifier Rated output: Front: 140 W + 140 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) 175 W + 175 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Center: 140 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) 175 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Surround: 140 W + 140 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.[...]

0 Analog Input sensitivity/Input impedance: 200 mV/47 kΩ/kohms Frequency response: 10 Hz – 100 kHz — +1, –3 dB (Direct mode) S/N: 102 dB (IHF–A weighted, Direct mode) Distortion: 0.005 % (20 Hz – 20 kHz) (Direct mode) Rated output: 1.2 V 0 Digital D/A output: Rated output — 2 V (at 0 dB playback) Total harmonic distortion — 0.008 % ([...]

o Video section 0 Standard video connectors Input/output level and impedance: 1 Vp-p, 75 Ω/ohms Frequency response: 5 Hz – 10 MHz — 0, –3 dB 0 Color component video connector Input/output level and impedance: Y signal — 1 Vp-p, 75 Ω/ohms P B / C B signal — 0.7 Vp-p, 75 Ω/ohms P R / C R signal — 0.7 Vp-p, 75 Ω/ohms Frequency response[...]

o Wireless LAN section Network type (wireless LAN standard): Conforming to Wi-Fi ® z 1 Security: WEP 64 bit, WEP 128 bit WPA/WPA2-PSK (AES) WPA/WPA2-PSK (TKIP) Radio frequency: 2.4 GHz No. of channels: 1 – 13 ch z 1 The Wi-Fi ® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance. Contents Conne[...]

o Bluetooth section Communications system: Bluetooth Version 2.1 + EDR (Enhanced Data Rate) Transmission power: Maximum 2.5 mW (Class 2) Maximum communication range: Approx. 10 m in line of sight z 2 Frequency band: 2.4 GHz band Modulation scheme: FHSS (Frequency-Hopping Spread Spectrum) Supported profiles: A2DP (Advanced Audio Distribution Profile[...]

o Dimensions (Unit : mm) . 434 237 55 70 15 152 167 235 339 393 22 12 32 344 60 45 45 o Weight: 14.1 kg Contents Connections Playback Settings Tips Appendix 313 Front panel Display Rear panel Remote Index[...]

Index v Numerics 11.1-channel ............................................ 43, 52 3D ................................................................ 278 4K ................................................................ 278 5.1-channel .................................. 33, 40, 49, 50 7.1-channel .................................. 32, 41, 46, 47 [...]

v I Input Assign ................................................. 190 Input signal ................................................... 292 Input source settings ............................ 159, 190 Inputting characters ...................................... 162 Inserting the batteries ....................................... 9 iPod Browse Mode ...[...]

v T Text Search .................................................. 120 Tips .............................................................. 257 Tone Control ................................................ 124 Troubleshooting ........................................... 259 Turning off the sound temporarily (Muting) ..... 76 Turning the power on ....[...]

List of preset codes To return a preset code to the default settings, register the AVR code “73347” to the button whose preset code you want to cancel. AVR . D Denon 73347 CBL/SAT group Registrable input source button : . CBL A A T&T 00858 B Bright House 01376, 01877 C Cable & Wireless 01068 Cable One 01376, 01877 Cablevision 01376, 018[...]

CBL/SAT group Registrable input source button : . S Samsung 01877 Scientific Atlanta 01877 Shaw 01376 Suddenlink 01376, 01877 T T ime Warner 01376, 01877 V Videotron 01877 VTR 01376 W WideOpenWest 01877 IP TV A A T&T 00858 C Cisco 00858, 02378 M Motorola 01376, 00858, 02378 P Philips 02174 S Samsung 02174 Scientific Atlanta 00858 T Thomson 02[...]

CBL/SAT group Registrable input source button : . J JVC 00775 K KabelBW 01195, 01915 Koenig 01631 L Lava 01631 Linsar 01284 Lodos 01284 Logik 01284 M Matsui 01284 MegaSat 01631 Metronic 01631 Motorola 00856 Multichoice 00879 MySky 01356 N Netsat 00099 NPG 01631 O Onn 01284 Optus 00879, 01356 Orbitech 01195 P Pace 00847, 01175, 01356 Pacific 01284 [...]

CBL/SAT group Registrable input source button : . CBL/SA T/PVR Combination C Com Hem 01176 F Foxtel 01356 H Humax 01176 P Pace 01356 T T echniSat 01195 SA T/PVR Combination A Amstrad 01175 B Bell ExpressV u 00775 British Sky Broadcasting 01175 BskyB 01175 D DirecTV 01377, 00099 Dish Network 00775 Dishpro 00775 E Echostar 00775 Edision 01631 Express[...]

TV group Registrable input source button : . TV A A.R. Systems 10556 Acoustic Solutions 11037 AEG 11037 Akai 10556 Akura 11037 Alba 11037 Alien 11037 Amstrad 11037 AOC 10625 Aristona 10556 ART 11037 B Barco 10556 Basic Line 10556, 11037 Belstar 11037 Berthen 10556 Black Diamond 11037 Blue Sky 10556, 10625, 11037 Brandt 10625 Bush 10556, 11037 C Car[...]

TV group Registrable input source button : . Multitec 11037 Myryad 10556 N Neckermann 10556 NEI 11037 Neufunk 10556 New T ech 10556 O O.K.Line 11037 Orion 10556, 11037 Ormond 11037 Osaki 10556 Otto V ersand 10556 P Pacific 10556, 11037 Palladium 10556 Panasonic 11636, 12170 Pansonic 11636 Philips 10810, 11454, 10556 Phonola 10556 Pioneer 11457, 11[...]

TV group Registrable input source button : . TV/DVD Combination B Black Diamond 11037 Blue Sky 11037 Bush 11037 C Centrum 11037 Crown 11037 D Dual 11037 E Elfunk 11037 Emerson 11864 F Ferguson 11037 G Goodmans 11037 H Hitachi 11037 L LG 11423 Logik 11037 Luxor 11037 M Matsui 11037 P Panasonic 12170 Philips 11454, 10556 S Samsung 12051 SEG 11037 Sha[...]

VCR/PVR group Registrable input source button : . VCR D DirecTV 20739 H Humax 20739 P Philips 20739 T T iV o 20739 PVR D DirecTV 20739 H Humax 20739 P Philips 20739 T T iV o 20739 Contents Connections Playback Settings Tips Appendix 324 Front panel Display Rear panel Remote Index[...]

BD/DVD group Registrable input source button : . DVD 3 3D LAB 30539 A Accurian 30675 AEG 30675 Akai 30675 Alba 30539 Aristona 30539 B Bel Canto Design 31571 Blue Parade 30571 Brandt 30503 C California Audio Labs 30490 Centrum 30675 Clatronic 30675 D Dantax 30539 Denon 30490, 31634, 33698, 32258 Disney 30675 DSE 30675 Durabrand 30675 E Emerson 30675[...]

BD/DVD group Registrable input source button : . DVD-R A Accurian 30675 D Denon 30490 E Emerson 30675 F Funai 30675 G Go Video 30741 GPX 30741 L LG 30741 Loewe 30741 M Magnavox 30675 Medion 30741 P Panasonic 30490, 32523, 32859 Pioneer 30631 S Samsung 30490 Sharp 30675, 32479, 33313 Sony 31633, 31516, 31033, 32178, 32180, 33519 Sylvania 30675 T T a[...]

Audio group Registrable input source button : . CD D M Denon 42867, 42868 Marantz 41985 CD-R D Denon 42868 Contents Connections Playback Settings Tips Appendix 327 Front panel Display Rear panel Remote Index[...]

License This section describes software license used for this unit. To maintain the correct content, the original (English) is used. o Boost http://www.boost.org/ Boost Software License – Version 1.0 – August 17th, 2003 Permission is hereby granted, free of charge, to any person or organization obtaining a copy of the software and accompanying [...]

Definitions. “Articles” means, collectively, all articles written by Author which describes how the Source Code and Executable Files for the Work may be used by a user. “Author” means the individual or entity that offers the Work under the terms of this License. “Derivative Work” means a work based upon the Work or upon the Work and oth[...]

You may distribute the Executable Files and Source Code only under the terms of this License, and You must include a copy of, or the Uniform Resource Identifier for, this License with every copy of the Executable Files or Source Code You distribute and ensure that anyone receiving such Executable Files and Source Code agrees that the terms of this [...]

No term or provision of this License shall be deemed waived and no breach consented to unless such waiver or consent shall be in writing and signed by the party to be charged with such waiver or consent. This License constitutes the entire agreement between the parties with respect to the Work licensed herein. There are no understandings, agreement[...]

0 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 0 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 0 Neither the name[...]

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPE[...]

o License information for the software used in the unit About GPL (GNU-General Public License), LGPL (GNU Lesser General Public License) License This product uses GPL/LGPL software and software made by other companies. After you purchase this product, you may procure, modify or distribute the source code of the GPL/LGPL software that is used in the[...]

. www.denon.com D&M Holdings Inc. 3520 10308 00AD 335[...]