DMP Electronics EBOX-2300SXA-C manual

eBox-2300SX-L S User ’s Manual 1 DM&P Gr oup eBox-2300SX-LS User ’ s Manual DMP Electronics Inc.[...]

eBox-2300SX-L S User ’s Manual I C OPYRIGHT The information in this manual is subject to change without notice for continuous improvement in the product. All rights are reserved. The manufacturer assumes no responsibility for any inaccuracies that may contain in this document, and makes no commitment to update or to keep current information conta[...]

eBox-2300SX-L S User ’ s Manual II T RADEMARKS A CKNOWLEDGMENT eBox-2300SX-LS is the registered tr ademarks of DMP Electronics Inc. The brand names, product names or trade names appearing in this document are the properties and registered tr ademarks of their respec tive owners. All names mentioned herewith are served fo r identification purpose [...]

eBox-2300SX-L S User ’ s Manual III S AFETY I NFORMA TION WARNING Do not expose eBox-2300SX to rain or moisture, in order to prevent shock and fire hazard. Never install eBox-2300SX in wet locations. Do not open the cabinet to avoid elec trical shock. Refer to your nearest dealer for qualified personnel servicing. Never touch un-insulated termina[...]

eBox-2300SX-L S User ’ s Manual IV R EGULA TORY FCC C LASS A N OTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Pa rt 15 of the FCC Rules. T hese limits are designed to provide reasonable protection against harmf ul interference when the equipment is operated in a commercial environm[...]

eBox-2300SX-L S User ’ s Manual V P URCHASE A GREEM ENT P URPOSE : In accordance to the general commercial conduct of T rust and Fa ir T rade, herewith below is the agreement for the protection fo r both parties, DMP and Users in pursuant of trading. P RODUCT D ESCRIPTION : With this product, herewith also known as eBox-2300SX, which is a simplif[...]

eBox-2300SX-L S User ’ s Manual VI Ta b l e Chapter 1 Product Package ………………………………………………………… 1 Chapter 2 The Setup Mode Setting ………………………………………………….2 First Section: Booting ………………………………………………………………….2 Second Section:[...]

eBox-2300SX-L S User ’s Manual 1 Chapter 1 Product Package 1. eBox-2300SX x 1 。 2. Power-15W-3pin x 1 。 3. Compact Flash Card x 1 。[...]

eBox-2300SX-LS User ’ s Manual 2 Chapter 2 The Setup Mode Setting First section: Booting 1.1 When you start the system and the scree n will shows as below: （ 1-1 ） 1.2 Input administrator ’s username and password as picture 1-2. The default username is administrator and the defaul t password is 123. Administrator can click in “My Computer[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 3 （ 1-2 ）[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 4 1.3 When you enter to Setup Mode in the first time as （ 1-3 ） . There are function icons, including “My Computer”, “Change Language”, and “T est S tateless” on the desktop. The administrator have to click into “My Computer”/ “Control Panel” and to install per[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 5 （ 1-4 ）[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 6 Second section: The Introducti on of Control Panel Setting Under “My Computer”/ “Control Panel”, it includes Networ k, User Desktop, Resource, VNC, Display , Package Info, Boot Menu, S tateless, Window Manager , Adjust T ime, Admin, XFS IP , Connecti on Manager , Environment[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 7 2.4 Resource ： Set “Enable” or “ Disable” in eBox Local access Peripheral resource. The Default is “Enable”. The system cooperates with Driver CD and Device Managercan to auto-scratch hardware devices on the resources list and installs the driver . 2.5 Package Info ：[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 8 2.7 Boot Menu ： Y ou can set “Enable” or “Disable” on eBox graphic or literal boot mode. Suggest user use default of the system and do not change it. 2.8 St ateless ： The implement can make administrator to centralize the setting methods. It is not necessaryto set eBox C[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 9 2.10 Adjust Time ： It can set the time and date of the system. 2.1 1 Admin ： It supply administrator to alter system password, and to set “Enable” or “Disable” system setting function inf Control Panel and Samba Server password revise setting tool 2.12 XFS IP ： The too[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 10 2.13 Connection Manager ： The tool is for integrateing RDP , ICA, XDMCP , VNC connection. User can set related connection setting of RDP , ICA, XDMCP , and VNC by Connection Manager . 2.14 Environment ： The tool is for setting keyboard language, mouse speed, mouse wheel. Sugges[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 11 Xhost. These are showed as (3-1). 3.1 Detect ： Net- detect tool. 3.1.1 Ping ： It can input IP Address to test whet her the Internet is normal or not. 3.1.2 T raceroute ： The tool can detect the c ondition of Nets Package T ransmission of IP address. 3.2 T erminal ： N e t Te[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 12 3.2.2 T elnet ： The tool is for Remote T erminal Connection. After Connecting to another host, if its IP address ha ve been added in Xhost (see 3.1) ， and input Command order: export DISPLA Y=local IP:0 .0. It means the x windows of the Remote Host will transmit to and operate [...]

_______________________________ eBox-2300SX-LS User ’ s Manual 13 Forth Section: About It shows related system information in “My Computer”/ “About”, including eBox version, CPU, and RAM as (4-1). (4-1)[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 14 Fif th Section: Network Setting 1 Click “My Computer”/ “Control Panel”/ “Network” and it will show Network Configuration as （ 5-1 ） . User can press Edit to pr oceed to network setting, and then click Enable DHCP to start DHCP and pre ss OK. The system will catch DH[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 15 Sixth Section: Desktop 1. Click “My Computer”/ “Control Panel ”/ “User Desktop”, it will show as （ 6-1 ） , and you can choose which tools can be used for user . （ means Enable ， means Disable ） After select, administrator press Accept and Preview , and then th[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 16 Seventh Section: Connecting Manager 1. Administrator can enter “My Computer”/ “Control Panel”/ “C onnection Manager” in Setup Mode which showed as （ 7-1 ） . Then press “New” and it will show “New Add”, including ICA 、 RDP 、 XDMCP 、 VNC. Administrator s[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 17 Edit ： Delet/ Modify Conncetion Delete ： Delete Connection Definition Desktop ： Select ICA and RDP which be set, then press ”Desktop”, and the connection will showed as ICON and be put on desktop in the User Mode. Autorun ： Press “Autorun” and the connection as ICA [...]

_______________________________ eBox-2300SX-LS User ’ s Manual 18 （ 7-4 ） Setting Item Illustration T itle Input Connection title Browse Option Network Protocol ： Choose one net work protocol. Server Location ： input IP or DNS of ICA Serv er which you want to connect. Browse Server Select Citrix Server or Pub lished Application in the Ser[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 19 7.1.2 ICA-Service Setting When you click Sevice in ICA Server Connection list, it will show a picture as （ 7-5 ） . （ 7-5 ） Setting Item Illustration Command Line Input complete application rout e, includi ng the name of application which be executed when you connect to ICA [...]

_______________________________ eBox-2300SX-LS User ’ s Manual 20 Setting Item Illustration Username Input ICA Server user ’s username. Password Input ICA Server user ’s pa ssword. Domain Any information about using Internet can be inputted in the frame. 7.1.4 ICA-Desktop Setting When you click Desktop in ICA Server C onnection list, it will [...]

_______________________________ eBox-2300SX-LS User ’ s Manual 21 Setting Item Illustration Connect via SOCKS Proxy If the firewall is used on ICA Server , you can click the item. Proxy Input IP address and Port numbe r . 7.1.6 ICA–Misc Setting When you click Misc in ICA Server Connection list, it will show a picture as （ 7-9 ） . （ 7-9 ?[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 22 （ 7-10 ） 7.1.7.2 ICA-Settings -Hotkeys Setting Press “Hotkeys” and it will show as （ 7-1 1 ） . Y ou can choose “Hotkeys” when you start ICA Server connection. （ 7-1 1 ） 7.1.7.3 ICA-Settings-Preference Setting After pressing “Setting” in ICA Server Connection[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 23 （ 7-13 ） 7.1.7.4 ICA-Settings-Drive Mapping Setting After pressing “Setting” in ICA Server Connec tion Setting, Press “Drive Mapping” and it will show as （ 7-14 ） . Y ou can set each storage and “Enable” its Read or W rite. （ 7-14 ） 7.1.7.5 ICA-Settings-COM [...]

_______________________________ eBox-2300SX-LS User ’ s Manual 24 （ 7-16 ） 7.1.7.7 ICA-Settings-Printer Setting After pressing “Setting” in ICA Server C onnection Setting, Press “Printer” and it will show as （ 7-17 ） . Select a printer which you want to use in the system and inform Server that the priting dat a should be transmitt[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 25 7.2 Set RDP Client Connection: After pressing “New” , click a “New Add” RDP Connection. It shows as (7-18). (7-18) 7.2.1 Set RDP Client Connection ： After clicking a “New Add” RDP Connection, it shows as (7-19), you have to input T itle in the “Name”. Also, you ne[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 26 7.2.2 Set RDP user ’ s Login informati on. It shows as (7-20). (7-20) 7.2.3 This part is set Network Drive, includ ing Disk Redirection, Com Port s and LPT Ports. It shows as below . (7-21)[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 27 7.2.4 Set Color Pallete and Screen Resolution of Desktop. It shows as (7-22). (7-22) 7.2.5 Set the type of printer . It shows as (7-23). (7-23)[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 28 7.2.6 The （ 7-24 ） shows that user select a connection s etting, press”Connect”, and it will connect to RDP Server . （ 7-24 ）[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 29 7.3 Set VNC Connection ： Add new VNC Connection and it will shows a VNC viewer as （ 7-25 ） . After setting VNC Server Name 、 Server IP 、 Password 、 Port, press OK and save VNC configuration; c lick connection type what you want and press “Connect” will connect to VN[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 30 7.4 XDMCP Connection Setting ： Add new XDMCP Connection and it will shows a XDMCP viewer as （ 7-26 ） . Input Connection T itle in “Name”, IP Address in “IP”and press “OK” to comp lete XDMCP Connection Setting. （ 7-26 ）[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 31 Eighth Section: S t ateless 8.1 If administrator has to set more 2300SX-LS in differ ent computer , you can uniform their using function and set differ ent using limit s by S tateless. （ 8-1 ） shows how to set the S tateless, includ ing User ID(Default ID ： st ateless), Passw[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 32 8.2 After executing the step of 8.1 go back to Desktop, press T est S tateless, and it will shows that Check User name, Password, Se rver Address. Then the system will show whether the S tateless Server is in success or not. If it in success and there will show “OK” viewer as ?[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 33 （ 8-3 ） 8.4 （ 8-4 ） is show that S tateless be in “Enab le” and it only reveal S t ateless after rebooting Control Panel. （ 8-4 ）[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 34 8.5 S tart S t atelesss and reboot, the system will request you to input login ID and password in booting process. Administrator can t ake the S tateless Demo ／ williamh.ini be reference in Driver CD. Af ter user input williamh in login and input williamh in Password, the syst em[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 35 CDPLA YER=1 CD Player: 1 means “Enable”, 0 means “Disable” MAIN=1 Control Panel: 1 means “Enable”, 0 means “Disable” TOOLBAR=1 T ool Bar: 1 means “Enable”, 0 means “Disable” OFF=1 T urn Off: 1 means “Enable”, 0 means “Disable” [userdesktop_autorun] A[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 36 8.6 St ateless The illustration of further argument: [extra_app] Put other V olutary- making applie d programs on user ’ s desktop Programe Name Program Name has to accord with Language Setting For example: my_lang=en The name pf program can not use Chinese my_lang=tw The name pf[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 37 2. Set EXCELArgument [rdp_excel] TYPE="rdp" NAME="test" DEF AUL T_ DOMAIN="tcide" DEF AUL T_ P ASSWORD="tcide" DEF AUL T_ USER="tcide" APPLICA TIO N="c:progra~1/micros~2/of fice/excel.exe" FULLSCREEN="T rue" SER[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 38 8.6 Set eBox-2300SX-LS argument in St ateless: Global.ini [lang] my_lang=en [icaserver] ip=21 1.72.201.94 ICA Server IP Address [appsrv] The name of applied program on ICA Server[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 39 Ninth Section: Alter Sy stem Password 9.1 User can alter system password in Admin. Administrator enters Control Panel/ Admin, and it will show a login screen. The default password is “123”, and press”login”. （ 9-1 ）[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 40 9.2 After login, the screen will show three icons as （ 9-2 ） , including Password, Authentication, and SAMBA. Password is for altering system booting password; Authentication is for setting “Enable”or ”Disabl e” system function, for example, if you pressed “Disable”[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 41 Chapter 3 The User Mode 1 . The User can “Double Click “thses icons on the Desktop, or press “S tart” to click the applied program which you want to use. （ 3-1 ） 2. Click “Opera” on the Desktop, input the Address, and it will connect to Internet Browser as （ 3-2 ?[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 42 （ 3-2 ）[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 43 Chapter 4 Q&A First Section about Win2000 Server  Q ： I can not input login information when I login Windows 2000 T erminal Server , why? A ： Make sure if the item of user offer has been selected in login information of RDP-T cp Connection Setting. Also, make su re the T[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 44 click “Next”. After pressing “Finish”, you will get a mail of PIN. (Personal ID Number). Then, go back to “T erminal Service License”, click right mouse key on Computer Name, and select “S tart Server .” Select first item on “License Wizard” then press “Next?[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 45 starting “T erminal Service”, you need use “A dd/ Remove” to re-install program. Next, select Windows 2000 User compatible authority . In the “T erminal Service License Install Pr ogram”, you should assign to authorize if the Server offers servi ce to all enterprise or [...]

_______________________________ eBox-2300SX-LS User ’ s Manual 46 http://support.microsoft.com/suppor t/kb/articles/Q248/4/30.ASP  Q ： How to set the Proxy in order to make the “T erminal Service” go through the Firewall? A ： T erminal Server client use the TC P 3389. hence, you have to set the Proxy Server be TCP- 3389. The method is [...]

_______________________________ eBox-2300SX-LS User ’ s Manual 47 Duplicate Drmapclt.dll File to WinntSystem32 Folder Press “S tart”/ “Execute” and input Reged t32 Input Drmapclt : HKEY_CURRENT_USERSo ftwareMicrosof tT erminal Server ClientDefaultAddins4 Input Drmapclt : HKEY _LOCAL_MACHINESOFTW AREMicrosoftT erminal Server Clien[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 48 Duplicate the 32-bit Fxfr .d ll to "Program FilesT ermi nal Services Client" Change the name of Rdpdr .dll which in the "Program FilesT erminal Services Client" to Rdpdr .pss Duplicate 32-bit Rdpdr . dll to "Progr am FilesT erminal Services Client" [...]

_______________________________ eBox-2300SX-LS User ’ s Manual 49 <Notice>Client computer can not remote contr ol System Controller and Sy stem Controller can not control Client computer . The Resolution of your computer and Client computer should be in consistency . Otherwise, the connection would be failed. Press CTRL + * and the Remote c[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 50 reset session: reset default. shadow: monitor other user ’s computer . tscon: Connet to other existing “T erminal” Server . tsdiscon: T erminate the connection of “T ermianl” Ser ver and Client. tskill: T erminate the procesure of processing. tsprof: duplicating the user [...]

_______________________________ eBox-2300SX-LS User ’ s Manual 51 Select an item from “Name” and press “Add”. Press “OK”. The item which yo u select will show on the “Name”.  Q: How can I call Microsof t Consum er Service Center to re-issue “T er minal License”? A: Y ou can call 00-800-2468-166 8 (Free) and press 3, it will[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 52 caused by improper using “Regedit”. The way of editing system register in formation, please open “Changing Keys a nd V alues” in the Regedt32.exe of “Discr iption” or open “Add and Delete Infor mation in the Registry” and “Edit Registry Data” in the Regedt32.exe[...]

_______________________________ eBox-2300SX-LS User ’ s Manual 53 Chapter 5 Technique Supporting Thank you for your supporting. If you have any installing problems, please call: Customer Service: (02)22980770 DMP Electronics Inc. Monday to Friday : AM 08:30-PM 17:30 Or E-mail to: info@compactpc.com.tw The website ： http://www .compactpc.com.tw [...]