Dodge 2006 LX Charger SRT8 manual

T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................. 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ........................... 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................ 6 1 4 UNDERST ANDING YOUR INSTRUMENT P ANEL ................................. 1 2 7 [...]

[...]

INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 How T o Use This Manual ................. 4 䡵 W arnings And Cautions .................. 6 䡵 V ehicle Identification Number .............. 6 䡵 V ehicle Modifications / Alterations .......... 7 1[...]

INTRODUCTION This manual has been prepar ed with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a W arranty Information Booklet and various customer oriented documents. Y ou are urged to read these publications car efully . Following the instruc- ti[...]

INTRODUCTION 5 1[...]

W ARNINGS AND CAUTIONS This manual contains W ARNINGS against operating procedur es which could result in an accident or bodily injury . It also contains CAUTIONS against procedures which could result in damage to your vehicle. If you do not read this entir e manual you may miss important information. Observe all W arnings and Cautions. VEHICLE IDE[...]

VEHICLE MODIFICA TIONS / AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. INTRODUCTION 7 1[...]

[...]

THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys ................. 1 1 ▫ Ignition Key Removal ................... 1 1 ▫ Key-In-Ignition Reminder ................ 1 2 ▫ Horn ............................... 1 2 䡵 Sentry Key ............................ 1 2 ▫ Replacement Keys ...................... 1 3 ▫ [...]

▫ Power W indows ....................... 2 4 䡵 T runk Lock And Release .................. 2 7 䡵 Occupant Restraints ..................... 2 8 ▫ Lap/Shoulder Belts ..................... 2 9 ▫ Seat Belt Pretensioners ................... 3 3 ▫ Enhanced Seat Belt Reminder System (BeltAlert) ........................... 3 4 ▫ Seat Belts And[...]

A WORD ABOUT YOUR KEYS Y ou can insert the double sided keys into the locks with either side up. The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys fr om your dealer . Ask your dealer for these numbers and keep them in a safe place. Ignition Key Removal The sh[...]

Refer to Personal Settings in the electronic vehicle infor - mation center (EVIC) Section of this manual for details. W ARNING! Leaving children in a vehicle unattended is danger- ous for a number of reasons. A child or others could be injured. Children should be warned not to touch the parking brake, brake pedal or the gear selector lever . Don’[...]

The Sentry Key Immobilizer System does not need to be armed or activated. Operation of the system is automatic regar dless of whether or not the vehicle is locked or unlocked. During normal operation, the Theft Alarm/ Immobilizer Light will come on for three (3) seconds immediately after the ignition switch is turned on for a bulb check. Afterwards[...]

At the time of purchase, the original owner is pr ovided with a four digit PIN number . This number is requir ed for dealer replacement of keys. Duplication of keys may be performed at an authorized dealer or by using the Customer Key Programming pr ocedure. This procedur e consists of programming a blank key to the vehicle electronics. A blank key[...]

General Information The Sentry Key system complies with FCC rules part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference that may be received, including interfer ence that may cause undes- ired operation. ILLUMINA[...]

W ARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • When leaving the vehicle always remove the key from the ignition lock, and lock your vehicle. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. Unsu[...]

Automatic Door Locks The doors will lock automatically on vehicles with power door locks if all of the following conditions are met: 1. The Auto Lock feature is enabled. 2. The transmission is in gear . 3. All doors are closed. 4. The throttle is pressed. 5. The vehicle speed is above 15 mph (24 km/h). 6. The doors were not previously locked using [...]

Child Protection Door Lock T o provide a safer envir onment for small children riding in the rear seats, the r ear doors are equipped with a child protection door lock system. W ARNING! A void trapping anyone in the vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged. [...]

REMOTE KEYLESS ENTR Y This system allows you to lock or unlock the doors, open the trunk, or activate the panic alarm fr om distances up to about 23 feet (7 meters) using a hand held radio transmitter . The transmitter need not be pointed at the vehicle to activate the system. NOTE: If the key is in the ignition switch, then all buttons on that tra[...]

T o unlock the doors: Press and r elease the UNLOCK button on the transmitter once to unlock the driver’s door , or twice to unlock all doors. The turn signal lights will flash twice to acknowl- edge the unlock signal. The illuminated entry system also turns on. The headlights will also activate and remain on for 90 seconds (programmable) when th[...]

The panic alarm will stay on for 3 minutes unless you turn it off by pr essing the P ANIC button a second time or if the vehicle speed is 15 mph (24 km/h) or greater . NOTE: • The interior lights will turn off when the ignition is switched to the ACC or ON position after the panic alarm is activated. However , the exterior lights and horn will re[...]

T ransmitter Battery Service The recommended r eplacement battery is one CR2032 battery . NOTE: Do not touch the battery terminals that are on the back housing or the printed circuit boar d. 1. W ith the transmitter buttons facing down, remove the small screw , and separate the two halves of the transmit- ter . Make sure not to damage the r ubber g[...]

T o arm the system: Remove the key from the ignition switch and either: 1. Press a power door lock switch while the driver’s or passenger’s door is open. 2. Press the LOCK button on the keyless entry transmit- ter . After the last door is closed, or if all doors are closed, the system will arm itself in about 16 seconds. During that time, the V[...]

The V ehicle Theft Alarm system is designed to pr otect your vehicle, however , you can create conditions wher e the system will give you a false alarm. If one of the previously described arming sequences has occurr ed, the system will arm regar dless of whether you are in the vehicle or not. If you remain in the vehicle and open a door , the alarm[...]

The window lock switch on the driver’s door allows you to disable the window controls on the passenger doors. When the lock switch is pressed the window contr ols on the passenger doors will not illuminate and the passen- ger windows will be disabled. W ARNING! Never leave children in a vehicle, with the keys in the ignition switch. Occupants, pa[...]

T o close the window part way , lift the window switch to the first detent and release when you want the window to stop. The power window switches remain active for 10 min- utes after the ignition switch has been turned off. The time is customer programmable thr ough the electronic vehicle information center (EVIC). Refer to “Delay Power Off to A[...]

W ind Buffeting W ind buffeting can be described as the perception of pressur e on the ears or a helicopter type sound in the ears. Y our vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions. This is a normal occur- rence and can be minimized. If the buf feting occurs wit[...]

W ith the ignition ON, the trunk open symbol will be displayed in the instrument cluster indicating that the trunk is open. The odometer display will r eappear once the trunk is closed. W ith the key in lock position or key out, the trunk open symbol will be displayed until the trunk is closed. CAUTION! Do not use the decklid spoiler to close the d[...]

W ARNING! In a collision, you and your passengers can suffer much greater injuries if you are not properly buck- led up. Y ou can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle. Always be sure you and others in your vehicle are buckled up properly . Buckle up even though you are an excellent driver [...]

W ARNING! • W earing a seat belt incorrectly is dangerous. Seat belts are designed to go around the large bones of your body . These are the strongest parts of your body and can take the forces of a collision the best. W earing your belt in the wrong place could make your injuries in a collision much worse. Y ou might suffer internal injuries, or[...]

W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you as well. In a sudden stop you could move too far forward, increasing [...]

W ARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as pos- sible and keep it snug. • A twisted belt can’t do its job as well. In a collision it could even cut into you. Be sure the [...]

Adjustable Upper Shoulder Belt Anchorage In the driver and front passenger seats, the shoulder belt can be adjusted upward or downwar d to position the belt away from your neck. Push and fully depr ess the button above the webbing to release the anchorage, and then move it up or down to the position that serves you best. As a guide, if you are shor[...]

Enhanced Seat Belt Reminder System (BeltAlert) If the driver’s or front passenger’s seat belt has not been buckled within 60 seconds of starting the vehicle and if the vehicle speed is greater than 5 mph (8 km/h), the Enhanced W arning System (BeltAlert) will alert the driver or front passenger to buckle their seat belt. The driver should also [...]

NOTE: Although the Enhanced W arning System (BeltAlert) has been deactivated, the Seat Belt W arning Light will continue to illuminate while the driver’s or front passenger’s seat belt r emains unbuckled. Seat Belts and Pregnant Women W e recommend that pr egnant women use the seat belts throughout their pr egnancy . Keeping the mother safe is [...]

Driver and Right Front Passenger Supplemental Restraint System (SRS) - Airbag This vehicle has front airbags for both the driver and front passenger as a supplement to the seat belt r estraint systems. The driver’s airbag is mounted in the center of the steering wheel. The passenger’s front airbag is mounted in the instrument panel, above the g[...]

This vehicle may also be equipped with left and right side curtain airbags to protect the driver and passengers sitting next to a window . If the vehicle is equipped with side curtain airbags, they are located above the side windows. Their covers are also labeled SRS AIRBAG. NOTE: Airbag covers may not be obvious in the interior trim, but they will[...]

Along with the seat belts, front airbags work with the instrument panel knee bolsters to pr ovide improved protection for the driver and fr ont passenger . Side Cur- tain Airbags also work with seat belts to improve occu- pant protection. The seat belts are designed to pr otect you in many types of collisions. The front airbags deploy in moderate t[...]

2. Y ou should read the instructions provided with your child restraint to make sur e that you are using it properly . 3. All occupants should use their seat belts properly . 4. The driver and front passenger seats should be moved back as far as practical to allow the airbags time to inflate. 5. If your vehicle has left and right side curtain airba[...]

Air Bag System Components The airbag system consists of the following: • Occupant Restraint Controller • Airbag W arning Light • Driver Airbag • Passenger Airbag • Side Curtain Airbags above Side W indows (If Equipped) • Side Remote Acceleration Sensors (If Equipped) • Steering Wheel and Column • Instrument Panel • Interconnecting[...]

• The ORC also monitors the readiness of the electr onic parts of the system whenever the ignition switch is in the ST AR T or ON positions. These include all of the items listed above except the knee bolster , the instru- ment panel, and the steering wheel and column. If the key is in the LOCK position, in the ACC position, or not in the ignitio[...]

requiring air bags. When the right fr ont passenger seat is empty or when very light objects are placed on the seat, the passenger air bag will not inflate even though the P AD indicator lamp is not illuminated. The P AD indicator light should not be illuminated when teenagers, most children in a forwar d-facing child restraint or booster seats, mo[...]

Front Passenger Seat Occupant Passenger Air- bag Disable (P AD) Indicator Light Airbag Status Adult OFF ON Grocery Bags, Heavy Briefcases and Other Rela- tively Light Ob- jects ON OFF Empty or V ery Small Objects OFF* OFF * Since the system senses weight, some small objects will turn the P AD Indicator Light on. The OCS classifies an occupant using[...]

If there is a fault pr esent in the OCS, the Airbag W arning Light (a red light located in the center of the instr ument cluster directly in fr ont of the driver) will be turned on. This indicates that you should take the vehicle to an authorized dealer . The Airbag W arning Light is turned on whenever there is fault that can af fect the operation [...]

• Y our vehicle has four W eight Sensors located between the seat and the floor pan. The weight sensors measure applied weight and transfers that information to the OCM. • The Side Impact SRS Side Curtain Airbag are de- signed to activate only in certain side collisions. When the ORC (with side impact option) detects a collision requiring the s[...]

• Do not replace the seat cover with an aftermarket seat cover . • Do not add a secondary seat cover other than those approved by DaimlerChrysler/Mopar . • At no time should any supplemental restraint system (SRS) component or SRS related component or fas- tener be modified or replaced with any part except those which are appr oved by Daimler[...]

• As the airbags deflate you may see some smoke-like particles. The particles are a normal by-pr oduct of the process that generates the nontoxic gas used for airbag inflation. These airborne particles may irritate the skin, eyes, nose, or throat. If you have skin or eye irritation, rinse the area with cool water . For nose or throat irritation, [...]

Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured because the airbags are not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper right [...]

the electronic data may be used by DaimlerChrysler and others to learn more about the possible causes of crashes and associated injuries in order to assess and impr ove vehicle performance. In addition to crash investigations initiated by DaimlerChrysler , such investigations may be requested by customers, insurance carriers, government officials, [...]

• Seatbelt status • Brake status (service and parking brakes) • Accelerator status (including vehicle speed) • Engine control status (including engine speed) • Cruise contr ol status • T raction/stability control status Child Restraint Everyone in your vehicle needs to be buckled up all the time, babies and children, too. Every state in[...]

one year old and weigh at least 9 kg (20 lbs). T wo types of child restraints can be used r earward-facing: infant carriers and “convertible” child seats. • The infant carrier is only used rearwar d-facing in the vehicle. It is recommended for childr en who weigh up to about 20 lbs (9 kg). “Convertible” child seats can be used either rear[...]

• The restraint must be appr opriate for your child’s weight and height. Check the label on the restraint for weight and height limits. • Carefully follow the instr uctions that come with the restraint. If you install the r estraint improperly , it may not work when you need it. • Buckle the child into the seat according to the child restra[...]

• Check belt fit periodically . A child’s squirming or slouching can move the belt out of position. • If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. Never allow a child to put the shoulder belt under an arm or behind their back. LA TCH — Child Seat Anchorage System (Lower Anchors and T et[...]

Installing the LA TCH-Compatible Child Restraint System W e urge that you car efully follow the directions of the manufacturer when installing your child r estraint. Not all child restraint systems will be installed as described her e. Again, carefully follow the installation instr uctions that were pr ovided with the child restraint system. The re[...]

NOTE: When using the LA TCH attaching system to install a child restraint, please ensur e that all seat belts not being used for occupant restraints ar e stowed and out of reach of childr en. It is recommended that before installing the child restraint, buckle the seat belt so the seat belt is tucked behind the child restraint and out of reach. If [...]

plate into the buckle again. If you still can’t make the child restraint secur e, try a differ ent seating position. T o attach a child restraint tether strap: 1. Rotate the cover over the anchor directly behind the seat where you ar e placing the child restraint. 2. Route the tether strap to provide the most dir ect path for the strap between th[...]

Pets should be restrained in the r ear seat in pet harnesses or pet carriers that are secur ed by seat belts. ENGINE BREAK-IN RECOMMENDA TIONS A long break-in period is not r equired for the engine in your new vehicle. Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h[...]

W ARNING! If you are required to drive with the trunk open, make sure that all windows are closed, and the climate control blower switch is set at high speed. DO NOT use the recirculation mode. Safety Checks Y ou Should Make Inside The V ehicle Seat Belts Inspect the belt system periodically , checking for cuts, frays and loose parts. Damaged parts[...]

Lights Have someone observe the operation of exterior lights while you work the controls. Check turn signal and high beam indicator lights on the instrument panel. Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil or other fluid leaks. Also, if gasoline fumes are detected or fuel, power steering fluid or bra[...]

[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors .............................. 6 5 ▫ Inside Day/Night Mirror ................. 6 5 ▫ Automatic Dimming Inside Mirror — If Equipped .......................... 6 5 ▫ Driver’s Side Outside Mirror Auto Dimmer — If Equipped .......................... 6 6 ▫ Exterior Mirrors F[...]

▫ Lumbar Support ....................... 9 0 ▫ Heated Seats—If Equipped ............... 9 0 ▫ Head Restraints ....................... 9 1 ▫ Folding Rear Seat ...................... 9 2 䡵 Adjustable Pedals ....................... 9 3 䡵 T o Open And Close The Hood ............. 9 4 䡵 Lights ............................... 9 5 ▫ Over[...]

▫ ESP/BAS W arning Lamp And ESP/TCS Indicator Light ....................... 1 0 7 䡵 Electronic Speed Contr ol ................. 1 0 8 ▫ T o Activate .......................... 1 0 9 ▫ T o Set At A Desired Speed ............... 1 0 9 ▫ T o Deactivate ........................ 1 0 9 ▫ T o Resume Speed ..................... 1 0 9 ▫ T o V [...]

䡵 Cupholders .......................... 1 2 2 ▫ Front Seat Cupholders — Standar d ......... 1 2 2 ▫ Front Seat Cupholders — Pr emium ......... 1 2 3 ▫ Rear Seat Cupholders .................. 1 2 3 䡵 Storage .............................. 1 2 4 ▫ Console Features ...................... 1 2 4 ▫ Cargo T ie-Down Hooks ................[...]

MIRRORS Inside Day/Night Mirror Adjust the mirror to center on the view thr ough the rear window . A two point pivot system allows for horizontal and vertical adjustment of the mirror . Annoying headlight glare can be r educed by moving the small control under the mirr or to the night position (toward r ear of vehicle). The mirror should be adjuste[...]

CAUTION! T o avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror . Apply the solution onto a clean cloth and wipe the mirror clean. Driver’s Side Outside Mirror Auto Dimmer — If Equipped The driver’s side outside mirror automatically adjusts for annoying headlight glare fr om vehicles behind [...]

Power Remote-Control Mirrors The power mirror switch is located on the driver’s door trim panel next to the power door lock switch. A rotary knob selects the left mirror , right mirror , or off position. After selecting a mirror move the knob in the same direction you want the mirr or to move. Use the center off position to guard against accident[...]

HANDS–FREE COMMUNICA TION (UConnect™) — IF EQUIPPED UConnect™ is a voice-activated, hands-free, in- vehicle communications system. UConnect™ allows you to dial a phone number with your cellular phone using simple voice commands (e.g., ⬙ Call” ѧ “Mike” ѧ ”W ork ⬙ or ⬙ Dial” ѧ “248-555-1212 ⬙ ). Y our cellular phone?[...]

The rearview mirr or contains the microphone for the system and the control buttons that will enable you to access the system. The diagram below shows the mirror with the appropriate buttons. Individual button behavior is discussed in the ⬙ Operation ⬙ section. The UConnect™ system can be used with any Hands- Free Pr ofile certified Bluetooth[...]

• For certain operations, compound commands can be used. For example, instead of saying ⬙ Setup ⬙ and then ⬙ Phone Pairing, ⬙ the following compound command can be said: ⬙ Setup Phone Pairing. ⬙ • For each of the feature explanation in this section, only the combined form of the voice command is given. Y ou can also break the comman[...]

The following are general phone to UConnect™ System pairing instructions: • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Phone Pairing. ⬙ • When prompted, after the voice on beep, say ⬙ Pair a Phone. ⬙ • Y ou will be asked to say a four-digit pin number which you will [...]

Dial by Saying a Number • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Dial. ⬙ • System will prompt you to say the number you want call. • For example, you can say ⬙ 234-567-8901. ⬙ The phone number that you enter must be of valid length and combination. The UConnect™ limits[...]

• When prompted, say the name of the new entry . Use of long names helps the voice recognition and is r ecom- mended. For example, say ⬙ Robert Smith ⬙ or ⬙ Robert ⬙ instead of ⬙ Bob. ⬙ • When prompted, enter the number designation (e.g.: ⬙ Home, ⬙⬙ W ork, ⬙⬙ Mobile, ⬙ or ⬙ Pager ⬙ ). This will allow you to store mul[...]

⬙ Phonebook Edit ⬙ can be used to add another phone number to a name entry that already exists in the phonebook. For example, the entry John Doe may have a mobile and a home number , but you can add John Doe’s work number later using the ⬙ Phonebook Edit ⬙ feature. Delete Entries in the UConnect™ Phonebook NOTE: Editing phonebook entrie[...]

List All Names in the UConnect™ Phonebook • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Phonebook List Names. ⬙ • The UConnect™ system will play the names of all the phonebook entries. • T o call one of the names in the list, press the ⬙ V oice Recognition’ button during [...]

Making a Second Call while Current Call in Progress T o make a second call while you are curr ently in a call, press the ’V oice Recognition’ button and say ⬙ Dial ⬙ or ⬙ Call ⬙ followed by the phone number or phonebook entry you wish to call. The first call will be on hold while the second call is in progr ess. T o go back to the first[...]

• The UConnect™ system will call the last number that was dialed on your cellular phone. Note: this may not be the last number dialed from the UConnect™ sys- tem. Call Continuation Call continuation is progr ession of a phone call on UConnect™ system after the vehicle ignition key has been switched to off. Call continuation functionality av[...]

Emergency Assistance If you are in an emer gency and the mobile phone is reachable: • Pick up the phone and manually dial the emergency number for your area. If the phone is not reachable and the UConnect™ system is operational, you may reach the emer gency number as follows: • Press the ’Phone’ button to begin. • After the ⬙ Ready ?[...]

Paging T o learn how to page, refer to section ⬙ W orking with Automated Systems. ⬙ Paging works properly except for pagers of certain companies which time-out a little too soon to work properly with the UConnect™ system. V oice Mail Calling T o learn how to access your voice mail, refer to section ⬙ W orking with Automated Systems. ⬙ W o[...]

• After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Confirmations. ⬙ The UConnect™ system will play the current confirmation pr ompt status and you will be given the choice to change it. Phone and Network Status Indicators If available on the radio and/or on a premium display such as the instrument panel cluster , and suppo[...]

Information Service When using A T&T W ireless Service, dialing to phone number ⬙ #121, ⬙ you can access voice activated automated system to receive news, weather , stocks, traffic, etc. related information. Advanced Phone Connectivity T ransfer Call to and from Cellular Phone The UConnect™ system allows on going calls to be transferred t[...]

Select another Cellular Phone This feature allows you to select and start using another phone with the UConnect™ system. The phone must have been previously pair ed to the UConnect™ system that you want to use it with. • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Select Phon[...]

• Make sure that no one other than you is speaking during a voice recognition period. • Performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather condition. • Even though the system is designed for users speaking in [...]

• Performance, such as, audio clarity , echo. and loud- ness to a large degr ee, rely on the phone and network, and not the UConnect™ system. • Echo at far end can sometime be reduced by lowering the in-vehicle audio volume. Bluetooth Communication Link Cellular phones have been found to occasionally lose connection to the UConnect™ system.[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 85 3[...]

86 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 87 3[...]

North American English Primary Alternate(s) Zero Oh Add location Add new All All of them Confirmation prompts Confirmations prompts Delete a name Delete Language Select language List names List all List paired phones List phones Pager Beeper Phone pairing Pairing Phonebook Phone book Return to main menu Return. Main menu Select phone select Set up [...]

W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked. CAUTION! Do not place any article under a power seat as it may cause damage to the seat control[...]

Lumbar Support This feature allows you to incr ease or decrease the amount of lumbar support. T urn the control lever for - ward to incr ease and rearward to decr ease the desired amount of lumbar support. Heated Seats—If Equipped Heated seats, which are available only with leather upholstery , provide comfort and warmth on cold days and can help[...]

Pressing the switch a second time will select low-level heating. Pressing the switch a thir d time will shut the heating elements off. When high-temperature heating is selected, the heaters provide a boosted heat level during the first four minutes of operation after heating is activated. The heat output then drops to the normal high-temperatur e l[...]

Folding Rear Seat The rear seatbacks can be folded forwar d to provide an additional storage area. Pull on the loops shown in the illustration to fold down either or both seatbacks. These loops can be tucked away when not in use. When the seat back is folded to the upright position make sure it is latched by str ongly pulling on the top of the seat[...]

ADJUST ABLE PEDALS This feature allows both the brake and accelerator pedals to move toward or away fr om the driver to provide improved position with the steering wheel. The adjust- able pedal system is designed to allow a greater range of driver comfort for steering wheel tilt and seat position. The switch is located on the front side of the driv[...]

TO OPEN AND CLOSE THE HOOD T wo latches must be released to open the hood. First, pull the hood release lever located under the left side of the instrument panel. Next, move to the outside of the vehicle and push the safety catch to the left. The safety catch is located under the center front edge of the hood. Use the hood prop r od — if equipped[...]

W ARNING! If the hood is not fully latched, it could fly up when the vehicle is moving and block your forward vision. Y ou could have a collision. Be sure all hood latches are fully latched before driving. CAUTION! Do not place heavy items or sit on the aluminum hood, as damage to the hood may result. LIGHTS Overhead Console Map/Reading Lights Thes[...]

Interior Lights The interior lights come on when a door is opened. The interior lights will automatically turn off 10 minutes after the ignition switch is moved to the LOCK position if they are switched on manually , or if a door is left open to protect the battery . T urn the ignition switch ON, or cycle the switchable lamp that was left on to res[...]

Headlight Switch The headlight switch is located on the left side of the instrument panel. This switch contr ols the operation of the headlights, parking lights, instrument panel lights, instrument panel light dimming, interior lights, and fog lights. Multi-Function Lever The multi-function lever controls the operation of the turn signals, headligh[...]

Headlights, Parking Lights, Instrument Panel Lights Rotate the headlight switch clockwise to the first detent for parking light and instrument panel light operation. T urn to the second detent for headlight, park light and instrument panel light operation. Daytime Running Lights (Canada Only) The high beam headlights will come on as Daytime Running[...]

If the headlights are turned of f before the ignition, they will turn off in the normal manner . NOTE: The lights must be turned off within 45 seconds of turning the ignition off to activate this featur e The Headlamp delay time is programmable on vehicles equipped with the Electronic V ehicle Information Center (EVIC). Refer to “Delay T urning H[...]

WINDSHIELD WIPERS AND W ASHERS The wipers and washers are operated by the multi-function lever . The lever is located on the left side of the steering column. Rotate the end of the control lever to select the desir ed wiper speed. CAUTION! T urn the windshield wipers off when driving through an automatic car wash. Damage to the windshield wipers ma[...]

Mist Feature Push the wiper lever in to activate a single wipe to clear off r oad mist or spray from a passing vehicle. As long as the lever is pushed in, the wipers will continue to operate. Windshield Wiper Operation Rotate the end of the lever to the second detent for Low speed wiper operation, or to the third detent for High speed operation. In[...]

The washer fluid reservoir will hold a full gallon of fluid when “Low W asher Fluid” (Electronic V ehicle Informa- tion Center equipped vehicles), or the low washer sym- bol (non Electronic V ehicle Information Center equipped vehicles) appears in the instrument cluster . TIL T/TELESCOPING STEERING COLUMN Unlock the steering column by pulling o[...]

ELECTRONIC BRAKE CONTROL SYSTEM Y our vehicle is equipped with an advanced electronic brake control system that includes ABS (Anti-Lock Brake System), TCS (T raction Control System), BAS (Brake Assist System and ESP (Electr onic Stability Program). All four systems work together to enhance vehicle stability and control in various driving conditions[...]

W ARNING! BAS (Brake Assist System) cannot prevent the natu- ral laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. BAS cannot prevent accidents, in- cluding those resulting from excessive speed in turns, driving on very slippery surfaces, or hydro- planing. Only a safe, attentive, a[...]

W ARNING! ESP (Electronic Stability Program) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ESP cannot prevent acci- dents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. Only a safe, attenti[...]

Partial Of f This mode is entered by momentarily depr essing the ⬙ ESP Control Switch ⬙ . When in ⬙ Partial Off ⬙ mode the TCS portion of ESP as been disabled and the ⬙ ESP/ TCS Indicator Light ⬙ will be illuminated. All other stability features of ESP function normally . This mode is intended to be used if the vehicle is in deep snow ,[...]

Full Of f This mode is intended for off-highway or of f-road use only and should not be used on any public roadways. This mode is entered by depr essing and holding the “ESP Contr ol Switch” for 5 seconds when the vehicle is stopped and the engine is running. In this mode, all ESP and TCS stability featur es are turned off. After 5 seconds, a c[...]

If the “ESP/BAS W arning Lamp” comes on continuously with the engine running, a mal- function has been detected in either the ESP or the BAS system, or both. If this light remains on after several ignition cycles, and the vehicle has been driven several miles at speeds greater than 30 mph (48 km/h), see your authorized dealer as soon as possibl[...]

T o Activate: Push and release the speed contr ol lever (“ON/OFF”) once and an LED on the lever will illuminate indicating that the electronic speed contr ol is ON. T o turn the system OFF , Push and release the lever (“ON/OFF”) again and the system and indicator will turn off. On some models an indicator light will illumi- nate in the inst[...]

T o V ary the Speed Setting: When the speed control is set, speed can be incr eased by pushing the lever up and holding (“ACC/RES”). When the lever is released, a new set speed will be established. Pushing the lever up and releasing (“ACC/RES”) once will result in a 1 mph (1.6 km/h) speed incr ease. Each time the lever is pushed up and rele[...]

OVERHEAD CONSOLE — IF EQUIPPED The overhead console contains courtesy/r eading lights, an optional universal garage door opener (HomeLink 威 ), storage for sunglasses, and optional power sunroof switches. Courtesy/Reading Lights At the forward end of the console ar e two courtesy/ reading lights. Press the lens to turn these lights on. Pr ess a [...]

GARAGE DOOR OPENER — IF EQUIPPED The HomeLink 威 Universal T ransceiver replaces up to three r emote controls (hand held transmitters) that oper- ate devices such as garage door openers, motorized gates, or home lighting. It triggers these devices at the push of a button. The Universal T ransceiver operates off your vehicle’s battery and charg[...]

The Electronic V ehicle Information Center (EVIC) fea- tures a driver -interactive display which includes HomeLink system messages. The EVIC is located in the instrument cluster below the speedometer . 1. Press and hold the two outer HomeLink buttons, and release only when the EVIC display shows “Channels Cleared” (after 20 seconds). Do not hol[...]

W ARNING! Y our motorized door or gate will open and close while you are training the Universal T ransceiver . Do not train the transceiver if people or pets are in the path of the door or gate. A moving door or gate can cause serious injury or death to people and pets or damage to objects. 2. Position the end of your hand-held transmitter 1-3 inch[...]

complete the programming of a r olling code equipped device (most common garage door openers requir e this step). 6. At the garage door opener receiver (motor-head unit) in the garage, locate the ⬙ learn ⬙ or ⬙ smart ⬙ button. This can usually be found where the hanging antenna wir e is attached to the motor-head unit. 7. Firmly press and r[...]

display will show “Channel X T rained” (where X is Channel 1, 2, or 3). Proceed with ⬙ Pr ogramming ⬙ step four to complete. Using HomeLink T o operate, simply press and r elease the programmed HomeLink button. Activation will now occur for the trained device (i.e. garage door opener , gate operator , security system, entry door lock, home/[...]

This device complies with part 15 of FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference that may be received including interfer ence that may cause undes- ired operation. NOTE: Changes or modifications not e[...]

W ARNING! • Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. • In an accident, there is a greater risk of being thrown from a vehicle wi[...]

Pinch Protect Override If a known obstruction (ice, debris, etc.) pr events closing, press the switch forwar d and hold for two seconds after the reversal occurs. This allows the sunr oof to move towards the closed position. NOTE: Pinch protection is disabled while the switch is pressed. V enting Sunroof - Express Press and r elease the ⬙ V ⬙ b[...]

Ignition Off Operation The power sunroof switches r emain active for 10 minutes after the ignition switch has been turned off. Opening either front door will cancel this featur e. This feature is programmable thr ough the Electronic V ehicle Informa- tion Center (EVIC). Refer to “Delay Power Off to Acces- sories Until Exit” under “Personal Se[...]

NOTE: If desired, the power outlet next to the ash tray receiver (if equipped) can be converted by your autho- rized dealer to provide power with the ignition switch in the LOCK position. The center console outlet is powered dir ectly from the battery (power available at all times). Items plugged into this outlet may discharge the battery and/or pr[...]

Electrical Outlet Use With Engine Off CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e. cellular phones, etc.). Eventually , if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting. • Accessories th[...]

Front Seat Cupholders — Premium The cupholders are located in the forwar d edge of the center console. Push down on the cover as shown to expose the cuphold- ers. Close the cover when the cupholders are no longer needed. Rear Seat Cupholders The rear seat cupholders ar e located in the center armrest between the rear seats. The cup holders ar e p[...]

STORAGE Console Features The center console includes a large internal storage bin. The storage bin has a rubber mat for noise contr ol. The bin is also large enough to hold a portable AC/DC converter to power lap tops, games, or other electrical equipment. T wo slots at the top right side of the bin provide clearance for power cor ds to pass conven[...]

• Place as much cargo as possible in fr ont of the rear axle. T oo much weight or improperly placed weight over or behind the rear axle can cause the r ear of the vehicle to sway . • Do not pile luggage or cargo higher than the top of the seatback. This could impair visibility or become a dangerous pr ojectile in a sudden stop or collision. W A[...]

[...]

UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instruments And Controls ................ 1 3 0 䡵 Instrument Cluster ..................... 1 3 1 䡵 Instrument Cluster Descriptions ........... 1 3 2 䡵 Electronic V ehicle Information Center (EVIC) . 139 ▫ T rip Functions ....................... 1 4 1 ▫ Compass Display ....................[...]

▫ Operating Instructions - Radio Mode ....... 1 5 7 ▫ Operating Instructions — T ape Player ....... 1 6 0 ▫ Seek Button ......................... 1 6 0 ▫ Fast Forward (FF) ..................... 1 6 0 ▫ Rewind (R W) ........................ 1 6 0 ▫ T ape Eject ........................... 1 6 1 ▫ Scan Button ......................... [...]

▫ Satellite Antenna ...................... 1 7 2 ▫ Reception Quality ..................... 1 7 2 䡵 Navigation System (Sales Code REC) — If Equipped ............................ 1 7 3 ▫ Clock Setting Procedur e................. 1 7 3 䡵 Remote Sound System Controls ........... 1 7 4 ▫ Radio Operation ...................... 1 7 5 ▫ T a[...]

INSTRUMENTS AND CONTROLS 130 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

INSTRUMENT CLUSTER UNDERST ANDING YOUR INSTRUMENT P ANEL 131 4[...]

INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position. 2. T rip Odometer Button Press this button to change the display fr om odometer to either of the two trip odometer settings. The letter “A” or “B” will appear when in the trip odometer mode. Push[...]

immediate service is requir ed and you may experience reduced performance, an elevated/r ough idle or en- gine stall and your vehicle may requir e towing. The light will come on when the ignition is first turned on and remain on briefly as a bulb check. If the light does not come on during starting, have the system checked by an authorized dealer .[...]

9. T urn Signal Indicators The arrow will flash with the exterior turn signal when the turn signal lever is operated. If the vehicle electronics sense that the vehicle has traveled about one mile with the turn signals on, a chime will sound to alert you to turn the signals off. If either indicator flashes at a rapid rate, check for a defective outs[...]

13. Electronic Stability Program (ESP) W arning Light/Brake Assist System (BAS) W arning Light The yellow ESP/BAS warning light in the instrument cluster comes on when the igni- tion switch is turned to the “ON” position. The light should go out with the engine running. If the ESP/BAS malfunction indicator light comes on continuously with the e[...]

19. Electronic V ehicle Information Center Display When the appropriate conditions exist, this display shows the Electronic V ehicle Information Center (EVIC) messages. (See page 139 for more information.) 20. Brake System W arning Light This light monitors various brake functions, including brake fluid level and parking brake application. If the b[...]

the ON position. The light should illuminate for approxi- mately two seconds. The light should then turn off unless the parking brake is applied or a brake fault is detected. If the light does not illuminate, have the light inspected by an authorized dealer . The light also will turn on when the parking brake is applied with the ignition switch in [...]

23. Anti-Lock Brake Light — If Equipped This light monitors the Anti-Lock Brake System. The light will turn on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the ABS light remains on or turns on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and [...]

ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC) The Electronic V ehicle Information Center (EVIC) fea- tures a driver -interactive display . It is located in the instrument cluster below the speedometer . V ehicles equipped with steering wheel mounted switches (de- scribed in this section) will also be equipped with the EVIC. The EVIC consists of the[...]

The system allows the driver to select information by pressing the following switches mounted on the steering wheel: Press and r elease the MENU button and the mode displayed will change between T rip Functions, Navigation (If Equipped), System W arnings, System Status, Personal Settings, and T elephone (If Equipped). Pressing the FUNCTION SELECT b[...]

• Personal Settings Not A vailable – V ehicle Not in Park • Left/Right Front Door Ajar (one or more, with a single chime if speed is above 1 mph) • Left/Right Rear Door Ajar (one or more, with a single chime if speed is above 1 mph) • Door (S) Ajar (with a single chime if vehicle is in motion) • Low W asher Fluid (with a single chime) ?[...]

• Distance T o Empty (DTE) Shows the estimated distance that can be travelled with the fuel remaining in the tank. This estimated distance is determined using the MPG for the last few minutes. This is not resettable. NOTE: The “LOW FUEL” message will appear in the EVIC display when DTE is 30 miles or less. • T rip A Shows the total distance[...]

Automatic Compass Calibration This compass is self calibrating which eliminates the need to manually set the compass. When the vehicle is new , the compass may appear erratic and the EVIC will display “CAL” until the compass is calibrated. Y ou may also calibrate the compass by completing one or more 360° turns in an area fr ee from large meta[...]

Compass V ariance Compass V ariance is the differ ence between magnetic North and Geographic North. In some areas of the country , the difference between magnetic and geographic North is great enough to cause the compass to give false readings. If this occurs, the compass variance must be set. NOTE: Magnetic materials should be kept away from the o[...]

T o set the variance: T urn the ignition switch ON. Press and hold the compass button for approximately 2 sec- onds. Use the SCROLL buttons until “Compass V ariance” is highlighted. The “Compass V ariance” message and the last variance zone number will be displayed. Press and release FUNCTION SELECT button until the pr oper variance zone is[...]

The EVIC displays this symbol to indicate that the U-Connect phone is currently in r oaming. The EVIC displays this symbol to indicate that you have voice mail. The EVIC displays this symbol to indicate a text message. The EVIC displays this symbol to indicate the battery strength of the U-Connect phone. The EVIC displays this symbol to indicate th[...]

menu. When the Map display is active, pressing the FUNCTION SELECT button will change the Navigation Unit Display to the Menu. T urn By T urn Directions If T urn by T urn Navigation is enabled through Personal Settings, the Navigation System will provide turn by turn directions to the pr ogrammed destination in the EVIC display . The name of the ap[...]

NOTE: UConnect™ language will not change using the EVIC. Please refer to “Language Selection” in the HANDS–FREE COMMUNICA TION (UConnect™) — IF EQUIPPED section of this manual for details. “Lock Doors Automatically at 15 MPH (24 Km/h)” When ON is selected all doors lock automatically when the speed of the vehicle reaches 15 mph (24 [...]

“Delay T urning Headlamps Off” When this feature is selected the driver can choose to have the headlamps remain on for 0, 30, 60, or 90 seconds when exiting the vehicle. Press and r elease the FUNC- TION SELECT button when in this display until 0, 30, 60, or 90 appears to make your selection. “T urn Headlamps On with Remote Key Unlock” When[...]

SALES CODE REF — AM/FM/CD (SINGLE DISC) RADIO WITH OPTIONAL SA TELLITE RADIO AND HANDS FREE PHONE CAP ABILITY NOTE: The radio sales code is located on the lower right side of your radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rot[...]

SEEK Button (Radio Mode) Press and r elease the SEEK button to search for the next listenable station in either AM/FM or Satellite (if equipped) mode. Press the right side of the button to seek up and the left side to seek down. The radio will remain tuned to the new station until you make another selec- tion. Holding the button will bypass station[...]

4. Adjust the minutes using the right side T une / Audio control. 5. T o exit, press any button/knob or wait 5 seconds. R W/FF (Radio Mode) Pressing the r ewind/fast forward button causes the tuner to search for the next fr equency in the direction of the arrows. This featur e operates in either AM, FM or Satel- lite (if equipped) frequencies. TUNE[...]

selected within 5 seconds after pressing the SET button, the station will continue to play but will not be stored into push-button memory . Y ou may add a second station to each push-button by repeating the above pr ocedure with this exception: Press the SET button twice and SET 2 will show in the display window . Each button can be set for SET 1 a[...]

SEEK Button (CD Mode) Press the right side of the SEEK button for the next track on the CD. Press the left side of the button to r eturn to the beginning of the current track, or r eturn to the beginning of the previous track if the CD is within the first 10 seconds of the current selection. MUTE Button (CD Mode) Press the MUTE button to cancel the[...]

Press the RND button a second time to stop Random Play . Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device such as an MP3 player , cassette player or microphone and utilize the vehicle’s audio system to amplify the source and play through the vehicle speaker[...]

R W/FF (Auxiliary Mode) No function. RND/SET Button (Auxiliary Mode) No function. Mode Button (Auxiliary Mode) Press the mode button r epeatedly to select between the CD player or Satellite Radio (if equipped). Operating Instructions - Hands Free Phone — If Equipped Refer to the HANDS FREE PHONE (UConnect™) section of the Owner’s Manual. Oper[...]

Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Press the ON/VOL control to turn the radio ON. Pr ess the ON/VOL a second time to turn OFF the radio. Electronic V olume Control The electronic volume contr ol turns continuously (360 degrees) i[...]

3. After the hours are adjusted, press the right side T une / Audio control to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side T une / Audio control. 5. T o exit, press any button/knob or wait 5 seconds. INFO Button (Radio Mode) Press the INFO button for an RBDS station (one with call letters displayed).[...]

Press the r otary TUNE control again to exit setting tone, balance and fade. RND/PTY Button (Radio Mode) Pressing this button once will turn on the PTY mode for 5 seconds. If no action is taken during the 5 second time out the PTY icon will turn of f. T urning the tune knob within 5 seconds will allow the program format type to be selected. Many ra[...]

By pressing the SEEK button when the PTY icon is displayed, the radio will be tuned to the next frequency station with the same selected PTY name. The PTY function only operates when in the FM mode. If a preset button is activated while in the PTY (Program T ype) mode, the PTY mode will be exited and the radio will tune to the preset station. NOTE:[...]

T ape Eject Press this button and the cassette will disen- gage and eject from the radio. Scan Button Press this button to play 10 seconds of each selection. Press the scan button a second time to cancel the featur e. Changing T ape Direction If you wish to change the direction of tape travel (side being played), press Pr eset 6. The lighted arrow [...]

Inserting Compact Disc(s) CAUTION! This CD player will accept 4 3/4 inch (12 cm) discs only . The use of other sized discs may damage the CD player mechanism. Y ou may eject a disc with the radio OFF . If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. T[...]

Radio display will show ⬙ EJECTING DISC ⬙ when the disc is being ejected and prompt the user to r emove the disc. Press and hold the LOAD/ EJT button for 5 seconds and all CDs will be ejected from the radio. If you have ejected a disc and have not removed it within 15 seconds, it will be reloaded. If the CD is not r emoved, the radio will conti[...]

Press and hold the FF button to fast forwar d through the tracks. Release the FF button to stop the fast forward feature. If the R W button is pressed, the current track will reverse to the beginning of the track and begin playing. Press the RND button a second time to stop Random Play . Button s1-6( C DM O D Ef o rC D Audio Play) Selects disc posi[...]

Supported MP3 File Formats The radio will recognize only files with the *.mp3 exten- sion as MP3 files. Non-MP3 files named with the *.mp3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file. When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and[...]

T o increase the speed of disc loading, it is r ecommended to use CD-R media and single-session discs. T o create a single-session disc, enable the Disc at Once option before writing to the disc. Operation Instructions - (CD Mode for MP3 and WMA Audio Play) SEEK Button (CD Mode for MP3 and WMA Play) Pressing the right side of the SEEK button plays [...]

INFO Button (CD Mode for MP3 Play) Press and INFO button while playing MP3 or WMA disc. The radio scrolls thr ough the following T AG information: Song T itle, Artist, File Name, and Folder Name (if avail- able). Press the INFO button once mor e to return to ⬙ elapsed time ⬙ priority mode. Press and hold the INFO button while in the message dis[...]

Operating Instructions - V ideo Entertainment System (VES) (If Equipped) Refer to separate V ideo Entertainment System (VES) Guide. VIDEO ENTERT AINMENT SYSTEM (SALES CODE XRV) — IF EQUIPPED The optional VES™ (V ideo Entertainment System) con- sists of a DVD player and LCD (liquid crystal display) screen, a battery-power ed remote control, and [...]

Raising The DVD Screen Remote Control Location UNDERST ANDING YOUR INSTRUMENT P ANEL 169 4[...]

SA TELLITE RADIO — IF EQUIPPED Satellite radio uses direct satellite to r eceiver broadcast- ing technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius™ Satel- lite Radio. This service offers up to 100 channels of music, sports, news, entertainment, and programming for chil- dren, dir ectly from i[...]

ESN/SID Access W ith RAQ and RAK Radios W ith the ignition switch in the ACCESSOR Y position and the radio OFF , press the CD Eject and TIME buttons simultaneously for 3 seconds. All twelve ESN/SID num- bers will be displayed. The radio will exit the ESN/SID mode when any other button is pushed, the ignition is turned OFF , or 5 minutes has passed [...]

Storing and Selecting Pre-Set Channels In addition to the 12 AM and 12 FM pre-set stations, you may also commit 12 satellite stations to push button memory . These satellite channel pre-set stations will not erase any AM or FM pr e-set memory stations. Follow the memory pre-set pr ocedures that apply to your radio. Using the PTY (Program T ype) But[...]

NA VIGA TION SYSTEM (SALES CODE REC) — IF EQUIPPED NOTE: The radio sales code is located on the lower right side of your radio faceplate. Navigation Radio with CD Player and MP3 Capability (REC) - combines a Global-Positioning System-based navigation system with a color screen to pr ovide maps, turn identification, selection menus and instruction[...]

REMOTE SOUND SYSTEM CONTROLS The remote sound system contr ols are located on the surface of the steering wheel at the 3 and 9 o’clock positions. Some models feature an Electr onic V ehicle Information Center (EVIC) with driver-interactive display . It is lo- cated in the instrument cluster below the speedometer . The audio mode of the EVIC can d[...]

The following describes the operation of the SCROLL buttons in each mode: Radio Operation Pressing the top of the switch will SEEK up for the next listenable station and pressing the bottom of the switch will SEEK down for the next listenable station. T ape Player Pressing the top of the switch once will go to the next selection on the cassette. Pr[...]

T wo T ypes of Signals There ar e two basic types of radio signals... AM or Amplitude Modulation, in which the transmitted sound causes the amplitude, or height, of the radio waves to vary ... and FM or Frequency Modulation, in which the frequency of the wave is varied to carry the sound. Electrical Disturbances Radio waves may pick up electrical d[...]

4. Before inserting a tape, make sure that the label is adhering flatly to the cassette. 5. A loose tape should be corrected befor e use. T o rewind a loose tape, insert the eraser end of a pencil into the tape drive gear and twist the pencil in the requir ed directions. Maintain your cassette tape player . The head and capstan shaft in the cassett[...]

RADIO OPERA TION AND CELLULAR PHONES Under certain conditions, the cellular phone being On in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the cellular phone antenna. This condition is not harmful to the radio. If your radio performance does not satisfactorily “cle[...]

indicate the rear window defr oster is ON. The defroster automatically turns off after about 10 minutes of opera- tion. CAUTION! T o avoid damaging the electrical conductors of the rear window defroster , do not use scrapers, sharp instruments, or abrasive window cleaners on the interior surface of the window . Labels can be peeled off after soakin[...]

NOTE: T o improve fuel economy , leave in defrost only when necessary . Defrost/Floor Air flows through the fr ont and rear floor outlets and the outlets at the base of the windshield. Air is also directed to the fr ont door windows through the side window demister grilles. Floor Air flows through the floor outlets located under the instrument pane[...]

W indow Fogging Interior fogging on the windshield can be quickly re- moved by turning the mode selector to Defrost. The Defrost/Floor mode can be used to maintain a clear windshield and provide suf ficient heating. If side win- dow fogging becomes a problem incr ease blower speed. V ehicle windows tend to fog on the inside in mild but rainy or hum[...]

system to maintain by rotating the driver’s or passenger’s control knob. Once the comfort level is selected the system will maintain that level automatically using the heating system. Should the desired comfort level r equire air conditioning, the system will automatically make the adjustment. Y ou will experience the greatest ef ficiency by si[...]

adjusting the blower control knob (left knob) to a position other than HI AUTO or LO AUTO. • Most of the time, when in Automatic operation, you can temporarily put the system into recir culation mode by pressing the Recir c button. However , under certain conditions in automatic the system is blowing air out of the defrost vents. When these condi[...]

184 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

The operator can override the AUTO mode setting and select the direction of the air by r otating the right mode knob to one of the following positions. • Defrost Air is directed to the windshield thr ough the outlets at the base of the windshield. Air is also directed to the fr ont door windows through the side window demister grilles. • Defros[...]

the rear window defr oster is ON. The defroster automati- cally turns off after appr oximately 10 minutes of opera- tion for the first push of the button, and will turn off after approximately 5 minutes for the second push of the button. CAUTION! T o avoid damaging the electrical conductors of the rear window defroster , do not use scrapers, sharp [...]

Winter Operation Use of the air Recirculation mode during winter months is not recommended because it may cause window fogging. NOTE: See Operating T ips chart (for Manual A/C Control) at the end of this section for suggested contr ol settings in differ ent weather conditions. V acation Storage Anytime you store your vehicle, or keep it out of serv[...]

Operating Tips 188 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 1 9 2 ▫ Normal Starting ...................... 1 9 2 䡵 T ransmission Shifting ................... 1 9 4 ▫ 5 Speed Automatic T ransmission .......... 1 9 4 ▫ Automatic T ransmission — General Information ................... 1 9 9 䡵 AutoStick .................[...]

▫ Life Of T ire ......................... 2 2 1 ▫ Replacement T ires ..................... 2 2 2 ▫ Alignment And Balance ................. 2 2 3 䡵 T ire Pressur e Monitor System — If Equipped .......................... 2 2 3 ▫ T ire Pressur e Monitoring — Base System ..... 2 2 3 ▫ T ire Pressur e Monitoring — Premium System ......[...]

䡵 Recreational T owing (Behind Motorhome, Etc.) ................ 2 3 9 ▫ T owing This V ehicle Behind Another V ehicle (Flat T owing W ith All Four Wheels On The Ground) ............................ 2 3 9 䡵 T railer T owing ........................ 2 3 9 ST ARTING AND OPERA TING 191 5[...]

ST ARTING PROCEDURES CAUTION! Long periods of engine idling, especially at high engine speeds, can cause excessive exhaust tempera- tures which can damage your vehicle. Do not leave your vehicle unattended with the engine running. W ARNING! Do not leave animals or children inside parked vehicles in hot weather; interior heat build up may cause seri[...]

W ARNING! • Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic transmission cannot be started this way . Un- burned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle. If the vehicle has a dis- charged battery , booster cables may be[...]

After Starting The idle speed will automatically decrease as the engine warms up. TRANSMISSION SHIFTING 5 Speed Automatic T ransmission W ARNING! Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle you should shift th[...]

Park Position The P ARK position is to be used when parking the vehicle. Engage only with the vehicle stopped. The P ARK position is not intended to serve as a brake when the vehicle is parked. Rather , the driver should always use the parking brake in addition to placing the selector lever in P ARK to secure the vehicle. P ARK supplements the park[...]

Neutral No power is transmitted from the engine to the drive axle. When the brakes are r eleased, the vehicle can be moved freely (pushed or towed). Do not engage in NEUTRAL position while driving except to coast when the vehicle is in danger of skidding (e.g., on icy roads). The engine may be started in this range. Use this range for starting your[...]

NOTE: T o avoid overrevving the engine when the selector lever is moved in “D -” direction, the transmis- sion will not shift to a lower gear if the engine’s revolu- tions per minute limit would be exceeded. Briefly press the selector lever in the “D +” dir ection. The transmission will shift from the curr ent gear to the next higher gear[...]

A reset feature is available to allow the vehicle to be driven to a dealer for service. T o reset the transmission, use the following procedur e: 1. Stop the vehicle. 2. Move the selector lever to the P ARK position. 3. T urn off the engine. 4. W ait approximately 10 seconds. 5. Restart the engine. 6. Move the shift lever to the desired range. If t[...]

Automatic T ransmission — General Information CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into P ARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift [...]

• The electronically contr olled transmission provides a precise shift schedule. The transmission electr onics are self-calibrating. Therefor e, the first few shifts on a new vehicle may be somewhat abrupt or soft until after the break-in period. This is a normal condition, and pr e- cision shifts will develop within a few shift cycles. W ARNING![...]

manner may cause the ABS or traction system malfunc- tion indicator light to come on. T urn off the engine and restart the engine to clear the malfunction indication. Brake T ransmission Shift Interlock System This vehicle is equipped with a brake transmission shift interlock system (BTSI) that holds the gearshift lever in the P (Park) position whe[...]

An UPSHIFT message will appear in the Electronic V ehicle Information Center (EVIC) portion of your instru- ment cluster when using Autostick. This message ap- pears in order to alert the driver to upshift to the next gear . The UPSHIFT message will display while operating the vehicle at higher engine revolutions–per–minute (RPM). Shifting into[...]

P ARKING BRAKE When the parking brake is applied with the ignition switch on, the brake light in the instrument cluster will turn on. NOTE: This light only shows that the parking brake is applied. It does not show the degree of brake application. Before leaving the vehicle, make sur e that the parking brake is fully applied and place the gear selec[...]

The parking brake should always be applied when the driver is not in the vehicle. W ARNING! • Leaving children in a vehicle unattended is dan- gerous for a number of reasons. A child or others could be injured. Children should be warned not to touch the parking brake, brake pedal or the gear selector lever . Don’t leave the keys in the ignition[...]

Anti-Lock Brake System The Anti-Lock Brake System provides incr eased vehicle stability and brake performance under most braking conditions. The system automatically “pumps” the brakes during severe braking conditions to pr event wheel lock-up. The electronic brake for ce distribution (EBD) prevents the rear wheels fr om over-braking and provid[...]

If the ABS light remains on or comes on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is requir ed. However , the conventional brake system will continue to operate normally if the BRAKE warning light is not on. If the ABS light is on, the brake system should be serviced as soon as po[...]

W ARNING! The Anti-Lock Brake System contains sophisticated electronic equipment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment. This interfer- ence can cause possible loss of anti-lock braking capability . Installation of such equipment should be performed by qualified professiona[...]

W ARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. CAUTION! Prolong operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and should be avoided when possible. Damage to the po[...]

• European Metric tir e sizing is based on European design standards. T ires designed to this standar d have the tire size molded into the sidewall beginning with the section width. The letter ⬙ P ⬙ is absent from this tir e size designation. Example: 215/65R15 96H • L T(Light T ruck)-Metric tire sizing is based on U.S. design standards. Th[...]

T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standar ds ⴖ ....blank.... ⴖ = Passenger car tire based on Eur opean design standards LT = Light T ruck tire based on U.S. design standar ds T = T emporary Spare tir e 31 = Overall Diameter in Inches (in) 215 = Section W idth in Milimeters (mm) 65 = A[...]

EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry . H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions. —The maximum speed corresponding to the Speed Symbol should only be a[...]

Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire however the date code may only be on one side. T ires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the T[...]

Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressure is listed on either the face of the driver’s door or the driver’s side “B” pillar . T ire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) the [...]

Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tir e size and cold tire inflation pressur es specified on the T ire and Loading Information placard and the V ehicle Loading section o[...]

6. If your vehicle will be towing a trailer , load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. NOTE: The following table shows examples on how to calculate total load, cargo/luggage and towing capacities of your vehicle with v[...]

216 ST ARTING AND OPERA TING[...]

W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES—GENERAL INFORMA TION Tire Pressure Proper tir e inflation pressure is essential to the safe and satisfactory ope[...]

2. Economy— Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread. These abnormal wear patterns will reduce tr ead life resulting in a need for earlier tire r eplacement. Underinflation also increases tire rolling r esistance and results in higher fuel consumption. 3. Ride Comfort and V ehicle Stability—[...]

CAUTION! After inspecting or adjusting the tire pressure al- ways reinstall the valve stem cap–if equipped. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressur es specified on the placard are always “cold tire inflation pr essure”. Cold tire inflation pr essure is defined as t[...]

W ARNING! High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your tires could cause them to fail. Y ou could have a serious accident. Don’t drive a vehicle loaded to the maximum capacity at continuous speeds above 75 mph (120 km/h). Radial-Ply Tires W ARNING! Combining radial ply tires with other types of [...]

T read Wear Indicators T read wear indicators ar e in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tr ead grooves and will appear as bands when the tr ead depth becomes 1/16 inch (2 mm). When the indicators appear in 2 or more adjacent gr ooves, the ti[...]

Replacement Tires The tires on your new vehicle pr ovide a balance of many characteristics. They should be inspected regularly for wear and correct cold tir e inflation pressur e. The manu- facturer str ongly recommends that you use tires equiva- lent to the originals in size, quality and performance when replacement is needed (see the paragraph on[...]

CAUTION! Replacing original tires with tires of a different size may result in false speedometer and odometer read- ings. Alignment And Balance Poor suspension alignment may result in: • Fast tire wear . • Uneven tire wear , such as feathering and one-sided wear . • V ehicle pull to right or left. T ires may also cause the vehicle to pull to [...]

The T ire Pressur e Monitoring System consists of the following components: • Receiver Module • 4 Wheel Sensors • T ire Pressur e Monitoring T elltale Lamp NOTE: For vehicles with optional wheel/tire sizes and significantly differ ent tire placard pr essures, the placar d pressur e value and the low-pressure thr eshold value is re-pr ogrammab[...]

NOTE: • The TPMS can inform the driver of a low tire pr essure condition. • The TPMS is not intended to replace normal tir e care and maintenance, nor to provide warning of a tir e failure or condition. • The TPMS should not be used as a tire pr essure gauge while adjusting your tire pr essure. Tire Pressure Monitoring — Premium System The [...]

Modules mounted in three of the four wheel wells, various T ire Pressur e Monitoring System Display Mes- sages in the EVIC, and T elltale Lamp. NOTE: For vehicles with optional wheel/tire sizes and significantly differ ent tire placard pr essures, the placar d pressur e value and the low-pressure thr eshold value is re-pr ogrammable at your authori[...]

CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equip- ment that is not of the same size, type, and/or style. After-market wheels can cause sensor damage. [...]

The tire pr essure sensors are cover ed under one of the following licenses: United States ..................... KR5S120123 Canada ........................ 2671-S120123 TIRE CHAINS If driving conditions requir e tire chains for your vehicle, chains that meet SAE class “S” requir ements can be used, but they must be installed on 245/45ZR20 size [...]

NOTE: In order to avoid damage to tir es, chains, and your vehicle do not drive for a prolonged period of time on dry pavement. Observe the tire chain manufactur er’s instructions on method of installation, operating speed, and conditions for usage. Always use the lower suggested operating speed if both the chain manufacturer and vehicle manufact[...]

Tire Rotation — Standard T ires The suggested rotation method is the “side-to-side” shown in the following diagram. Tire Rotation — All Season Tires The suggested rotation method for vehicles equipped with all season tires is the “forwar d-cross” shown in the following diagram. Tire Rotation — General Information T ires on the front a[...]

mud, snow , and wet traction levels, and contribute to a smooth, quiet ride. GROUND CLEARANCE CAUTION! Damage to the front and rear fascias can occur if you disregard the low ground clearance in the front and rear of this vehicle. Pay close attention when parking to avoid running into parking curbs. Exercise caution when entering or exiting steep d[...]

Over 40 automobile manufacturers ar ound the world have issued and endorsed consistent gasoline specifica- tions (the W orld W ide Fuel Charter , WWFC) to define fuel properties necessary to deliver enhanced emissions, engine performance, and durability for your vehicle. The manufacturer r ecommends the use of gasolines that meet the WWFC specifica[...]

MMT In Gasoline MMT is a manganese containing metallic additive that is blended into some gasoline to increase the octane num- ber . Gasolines blended with MMT offer no performance advantage beyond gasolines of the same octane number without MMT . Gasolines blended with MMT have shown to reduce spark plug life and r educe emission system performanc[...]

• The use of fuel additives which are now being sold as octane enhancers are not r ecommended. Most of these products contain high concentrations of methanol. Fuel system damage or vehicle performance problems resulting fr om the use of such fuels or additives are not the responsibility of the manufactur er . NOTE: Intentional tampering with emis[...]

ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is located behind the fuel filler door on the left side of the vehicle. Push in on the left side (near the edge) of the fuel filler door to access the fuel filler cap. If the gas cap is lost or damaged, be sure the r eplacement cap is for use with this vehicle. CAUTION! Damage to the fuel system or [...]

NOTE: • T ighten the gas cap until you hear a “clicking” sound. This is an indication that the gas cap is properly tightened. If the gas cap is not secured pr operly the Malfunction Indicator Light in the instrument cluster will turn on. Make sure that the gas cap is tightened each time the vehicle is refueled. • When the fuel nozzle “cli[...]

VEHICLE LOADING The load carrying capacity of your vehicle is shown in the charts that follow . This information should be used for passenger and luggage loading as indicated. If the seatbacks are folded for carrying car go, do not exceed the specified GVWR and GA WR. V ehicle Certification Label Y our vehicle has a certification label attached to [...]

Overloading The load carrying components (axle, springs, tires, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and front and rear GA WR. The best way to figure out the total weight of your vehicle is to weigh it when it is fully loaded and ready for operation. W eigh it on a commercial scale to[...]

Front Axle Rear Axle Empty W eight 2054 lbs (932 kg) 1805 lbs (819 kg ) Load (Including driver , pass- sengers and cargo) 271 lbs (123 kg) 579 lbs (263 kg) T otal 2325 lbs (1055 kg) 2384 lbs (1081 kg) GA WR 2546 lbs (1 155 kg) 2708 lbs (1228 kg) RECREA TIONAL TOWING (BEHIND MOTORHOME, ETC.) TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE (Flat towing wi[...]

[...]

WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................. 2 4 2 䡵 If Y our Engine Overheats ................ 2 4 2 䡵 TIREFIT T ire Repair .................... 2 4 3 䡵 Jump-Starting Procedur es If Battery Is Low ... 2 4 7 䡵 Driving On Slippery Surfaces ............. 2 4 9 ▫ Acceleration ......................... 2 [...]

HAZARD W ARNING FLASHER The hazard flasher switch is located in the center of the instrument panel below the center air outlets. T o engage the Hazard W arning Flashers, depress the switch on the instrument panel. When the Hazar d W arn- ing Switch is activated, all directional turn signals will flash on and off to warn oncoming traf fic of an emer[...]

removes this heat. Y ou can also turn the T emperature control to maximum heat, the Mode contr ol to floor , and the fan control to High. This allows the heater cor e to act as a supplement to the radiator and aids in removing heat from the engine cooling system. CAUTION! Driving with a hot cooling system could damage your vehicle. If temperature g[...]

The TIREFIT system is located under an access panel in the rear compartment 1. Air pump hose 2. Power plug and cable 3. Air pump switch 4. Pressure gauge 5. TIREFIT sealant bottle 6. TIREFIT sealant hose TIREFIT Location TIREFIT contents 244 WHA T TO DO IN EMERGENCIES[...]

W ARNING! • Do not attempt to repair a tire on the side of the vehicle close to traffic. Pull far enough of f the road to avoid the danger of being hit when operating the jack or repairing a tire. • Cuts or punctures larger than approximately 0.16 in. (4 mm), tire damage caused by driving with extremely low tire pressure or on a flat tire, or a[...]

5. Unscrew the valve cap from the valve on the deflated tire. 6. Screw the filler hose (6) from the sealant bottle (5) on the tire valve. 7. Insert the power plug (2) into the power point on the instrument panel. 8. T urn the ignition key to the ON/RUN position. 9. Press the switch (3) on the air pump to I (ON). The air pump should start to inflate[...]

• Do not operate the electric air pump for more than eight minutes to avoid overheating. The air pump may be used again once it has cooled down. • Replace the TIREFIT sealant bottle (5) once every four years to assure optimum operation of the system. • If TIREFIT is liquid, clean water and a damp cloth will remove the material fr om the vehic[...]

W ARNING! • Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic trans- mission cannot be started this way . Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle. If the vehicle has a discharged battery , booster cables may be u[...]

4. Connect one end of the jumper cable to the remote jump start positive battery post (A) in the engine com- partment. Connect the other end of the same cable to the positive terminal of the booster battery . Refer to the following illustration for jump starting connections. 5. Connect the other cable, first to the negative terminal of the booster [...]

W ARNING! Rapid acceleration on slippery surfaces is danger- ous. Unequal traction can cause sudden pulling of the rear wheels. Y ou could lose control of the vehicle and possibly have an accident. Accelerate slowly and carefully whenever there is likely to be poor traction (ice, snow , wet mud, loose sand, etc.). T raction When driving on wet or s[...]

W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 35 mph (55 km/h) when you are stuck. And don’t let anyone near a spinning wheel, no matter what the speed. CAUTION! Racing the eng[...]

CAUTION! • Do not attempt to tow this vehicle from the front with sling type towing equipment. Damage to the front fascia will result. • The only approved method of towing is with a flat bed truck. • Do not tow the vehicle from the rear . Damage to the rear sheet metal, and fascia will occur . • Do not push or tow this vehicle with another [...]

MAINT AINING YOUR VEHICLE CONTENTS 䡵 6.1L Engine .......................... 2 5 5 䡵 Onboard Diagnostic System — OBD II ...... 2 5 6 䡵 Emissions Inspection And Maintenance Programs ............................ 2 5 7 䡵 Replacement Parts ..................... 2 5 8 䡵 Dealer Service ........................ 2 5 8 䡵 Maintenance Procedur es[...]

▫ W indshield W ashers/Headlight W ashers ..... 2 7 0 ▫ Exhaust System ...................... 2 7 0 ▫ Cooling System ....................... 2 7 1 ▫ Hoses And V acuum/V apor Harnesses ....... 2 7 5 ▫ Brakes ............................. 2 7 6 ▫ Brake Fluid Level Check ................ 2 7 7 ▫ Fuel System Hoses .................... 2 7[...]

6.1L ENGINE 6.1L Engine Compartment MAINT AINING YOUR VEHICLE 255 7[...]

ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems ar e operating properly , your vehicle will provide excellent performance and fuel economy , as wel[...]

EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requir ement to pass an inspection of your vehicle’s emissions control system. Failure to pass could pr event vehicle registration. For states which have an I/M (Inspection and Maintenance) requir ement, this check verifies the following: the MIL (Malfunction Indi[...]

If your OBD system is not ready , you should see your authorized dealer or repair facility . If your vehicle was recently serviced or had a battery failur e or replacement, you may need to do nothing more than drive your vehicle as you normally would in order for your OBD system to update. A recheck with the above test r outine may then indicate th[...]

NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you. W ARNING! Y ou can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the proper equipment. If you have any doubt about your ability to perform a service job, take yo[...]

Engine Oil Checking Oil Level T o assure pr oper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop. The best time to check the engine oil level is about 5 minutes after a fully warmed engine is shut off or befor e starting the engine after it has sat overnig[...]

CAUTION! Operating the engine with the oil levels below the safe zone, or operating with oil levels that exceed the top of the safe zone may cause engine damage. Change Engine Oil Road conditions and your kind of driving affects the interval at which your oil should be changed. Check the following list to see if any apply to you. • Day or night t[...]

Engine Oil V iscosity Chart The proper SAE viscosity grade of engine oil should be selected based on the following recommendation and be within the operating temperature shown in the engine oil viscosity chart. Materials Added to Engine Oil The manufacturer str ongly recommends against the ad- dition of any additives (other than leak detection dyes[...]

inspected at the specified intervals, and replaced if r e- quired. See your authorized dealer for service. At the mileage indicated in the maintenance schedule, all belts and tensioner should be checked for condition. Improper belt tension can cause belt slippage and failur e. Belts should be inspected for evidence of cuts, cracks, glazing, or fray[...]

Fuel Filter A plugged fuel filter can cause stalling, limit the speed at which a vehicle can be driven or cause hard starting. Should an excessive amount of dirt accumulate in the fuel tank, filter replacement may be necessary . See your local dealer for service. Catalytic Converter The catalytic converter requir es the use of unleaded fuel only . [...]

W ARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your ex- haust system. Do not park or operate your vehicle in areas where your exhaust system can contact any- thing that can burn. In unusual situations involving grossly malfunctioning engine o[...]

Maintenance-Free Battery The top of the MAINTENANCE-FREE battery is perma- nently sealed. Y ou will never have to add water , nor is periodic maintenance requir ed. NOTE: The battery is stored under an access cover in the rear compartment. Remote battery terminals ar e located in the engine compartment for jump starting. NOTE: The battery in this v[...]

CAUTION! • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked posi- tive (+) and negative (-) and identified on the battery case. Cable clamps should be tight on the terminal posts and free of corrosion.[...]

Refrigerant Recovery and Recycling R-134a Air Conditioning Refrigerant is a hydrofluor ocar- bon (HFC) that is endorsed by the Environmental Pr o- tection Agency and is an ozone-saving product. How- ever , the manufacturer r ecommends that air conditioning service be performed by dealers or other service facilities using recovery and r ecycling equ[...]

If necessary , add fluid to restore to the pr oper indicated level. W ith a clean cloth, wipe any spilled fluid from all surfaces. Refer to Fluids, Lubricants, and Genuine Parts for correct fluid type. Front & Rear Suspension Ball Joints The suspension ball joints should be inspected for exter- nal leakage or damage when other maintenance is pe[...]

Windshield W ashers/Headlight W ashers The windshield washer system and the headlamp washer system share the same fluid r eservoir . The reservoir is located in the engine compartment and should be checked for fluid level at regular intervals. Fill the reservoir with windshield washer solvent (not radiator antifreeze) and operate the system for a f[...]

Cooling System W ARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position. • Y ou or others can be badly burned by hot coolant or steam from your radiator . If you se[...]

Cooling System — Drain, Flush and Refill At the intervals shown on the Maintenance Schedules, the system should be drained, flushed and refilled. If the solution is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner . Follow with a thorough rinsing to r emove all deposits and chemicals. Pro[...]

Adding Coolant Y our vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This coolant can be used up to 5 Y ears or 100,000 miles before replacement. T o prevent reducing this extended mainte- nance period, it is important that you use the same coolant throughout the life of your vehicle. Please r evie[...]

W ARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety pre- caution. Never add coolant when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. T o prevent scalding or injury , do not remove the pressure cap whi[...]

humidity accumulating on the radiator and being vapor- ized when the thermostat opens, allowing hot coolant to enter the radiator . If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be safely driven. The vapor will soon dissipate. • Do not overfill the coolant recovery bottle. • Check cool[...]

Insure nylon tubing in these ar eas has not melted or collapsed. Inspect all hose connections such as clamps and cou- plings to make sure they ar e secure and no leaks are present. Components should be replaced immediately if ther e is any evidence of wear or damage that could cause failure. Brakes In order to assur e brake system performance, all [...]

NOTE: Inspection of brake hoses should be performed whenever the brake system is serviced and at every engine oil change. Inspect hydraulic brake hoses for surface cracking, scuffing, or worn spots. If ther e is any evidence of cracking, scuffing, or worn spots, the hose should be replaced immediately! Eventual deterioration of the hose can take pl[...]

W ARNING! • Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. • Use of a brake fluid that has a lower initial boiling point than the recommended MOP AR DOT 3 product or a brake fluid that is unidentified as to FMVSS specification may result in sudden brake failure dur[...]

CAUTION! Using a transmission fluid other than the manufac- turer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder . Using a transmission fluid other than that recommended by the manufacturer will result in more frequent fluid and filter changes. Refer to the Fluids, Lubricants and Genuine [...]

Appearance Care and Protection from Corrosion Protection of Body and Paint from Corrosion V ehicle body care requir ements vary according to geo- graphic locations and usage. Chemicals that make roads passable in snow and ice, and those that are sprayed on trees and r oad surfaces during other seasons, are highly corrosive to the metal in your vehi[...]

CAUTION! Do not use abrasive or strong cleaning materials such as steel wool or scouring powder , which will scratch metal and painted surfaces. Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose off the under carriage at least once a month. • It is important that the drain holes in the lower edges of the [...]

Interior Care Use Mopar Fabric Cleaner or equivalent to clean fabric upholstery and Mopar Carpet Cleaner for carpeting. Interior T rim should be cleaned starting with a damp cloth, or Mopar Satin Select. Do not use harsh cleaners or Armorall. Use Mopar T otal Clean to clean vinyl uphol- stery . Mopar T otal Clean is specifically recommended for lea[...]

Cleaning Plastic Instrument Cluster Lenses The lenses in front of the instr uments in this vehicle are molded in clear plastic. When cleaning the lenses, care must be taken to avoid scratching the plastic. 1. Clean with a wet soft rag or microfiber towel. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If[...]

CAUTION! • When installing the Power Distribution Center cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Power Distribu- tion Center , and possibly result in a electrical system failure. • When replacing a blown fuse, it is important to use only a fuse havi[...]

Cavity Fuse Circuits 14 25 Amp Clear Powertrain Control Module 15 20 Amp Y ellow Injectors, Ignition Coils 16 15 Amp Dk. Blue Powertrain Control Module 17 30 Amp Pink Antilock Brake System (ABS) V alves 18 30 Amp Pink W indshield W iper/W asher 19 50 Amp Red Radiator Fan 20 20 Amp Lt. Blue Starter 21 50 Amp Red ABS Pump Motor Cavity Fuse Circuits 2[...]

Rear Power Distribution Center There is also a power distribution center located in the rear compartment under an access panel. This center contains fuses and relays. CAUTION! • When installing the Power Distribution Center cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to [...]

Cavity Fuse Circuits 3— — 4 40 Amp Green Battery 5 30 Amp Pink Heated Seat/Steering Column 6 20 Amp Y ellow Fuel Pump 7— — 8 15 Amp Dk. Blue Ignition Start/Run - Start 9 20 Amp Y ellow Console Power Outlet 10 10 Amp Red Rear Fog Lamp — If Equipped 1 1 25 Amp C/BRKR Memory Module/Door Locks 12 25 Amp C/BRKR Passenger Power Seat 13 25 Amp C[...]

Cavity Fuse Circuits 27 10 Amp Red Airbag/Occupant Classifica- tion Module 28 10 Amp Red Curtain Airbag - if equipped 29 5 Amp Orange Sentry Key/Remote Keyless Entry/Powertrain Control Module Ignition Feed 30 10 Amp Red Steering Column Module/ Power Mirrors - if equipped 3 1—— 3 2—— 3 3—— 3 4—— 35 5 Amp Orange Power Antenna/Garage D[...]

VEHICLE STORAGE If you are leaving your vehicle dormant for mor e than 21 days you may want to take steps to protect your battery . Y ou may: • Disconnect the negative cable from the battery . • Anytime you store your vehicle, or keep it out of service (i.e. vacation) for two weeks or more, r un the air conditioning system at idle for about fiv[...]

LIGHT BULBS — Exterior Bulb Number Low Beam Headlamp ..................... 9006 High Beam Headlamp .................... 9005 Front Park/T urn Lamp ................ 3157NAK Front Fog Lamp—If Equipped . . . 9145/H10 (Serviced at Dealer) Front Sidemarker ........... 1 9 4 (Serviced at Dealer) T ail/Stop Lamp ......................... 3057 T ail/T [...]

CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. MAINT AINING YOUR VEHICLE 291 7[...]

Backup Lamp, Side Marker Lamp, T ail/T urn Lamp, and T ail/Stop Lamp 1. Open the T runk. 2. Remove two fasteners from the back of the tail lamp assembly . 3. Pull back the trunk liner . 4. Remove the remaining fastener from the back of the tail lamp assembly . 5. Push the electrical connector locking tab to the side. 6. Disconnect the electrical co[...]

MAINT AINING YOUR VEHICLE 293 7[...]

8. Pull the appropriate bulb to remove it fr om the socket. 9. Replace the bulb, reinstall the socket, and reattach the tail light assembly . 10. Close the trunk. License Lamp 1. Remove the screws securing the light to the rear fascia. 2. Remove the bulb and socket assembly and pull the bulb from the socket. 3. Replace the bulb and r einstall the b[...]

FLUIDS AND CAP ACITIES U.S. Metric Fuel (approximate) 6.1 Liter Engines (Premium 91 Octane) 19 gal- lons 72 liters Engine Oil-W ith Filter 6.1 Liter Engines (SAE 0W -40) 7 qts. 6.6 liters Cooling System * 6.1 Liter Engines (Mopar 威 Antifreeze/Coolant 5 Y ear/ 100,000 Mile Formula) or equivalent. 14.8 qts 14.0 li- ters * Includes heater and coolan[...]

FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine Component Fluids, Lubricants and Genuine Parts Engine Coolant Mopar 威 Antifr eeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Or- ganic Additive T echnology) or equivalent. Engine Oil (6.1 Liter) Use API rated SM/CF full synthetic engine oil. SAE 0W -40 is recommended. Refer to the engine oil vi[...]

MAINTENANCE SCHEDULES CONTENTS 䡵 Emission Control System Maintenance ...... 2 9 8 䡵 Maintenance Schedules .................. 2 9 8 ▫ Schedule “B” ........................ 3 0 1 ▫ Schedule “A” ........................ 3 0 8 8 M A I N T E N A N C E S C H E D U L E S[...]

EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued pr oper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliab[...]

• T axi, police, or delivery service (commercial ser - vice). 〫 • Off-r oad or desert operation. NOTE: If ANY of these apply to you then change your engine oil every 3,000 miles (5 000 km) or 3 months, whichever comes first and follow schedule “B” of the ⬙ Maintenance Schedules ⬙ section of this manual. NOTE: IF ANY of these apply to [...]

Once a Month • Check tire pr essure and look for unusual wear or damage. • Inspect the battery and clean and tighten the terminals as requir ed. • Check the fluid levels of coolant reservoir and brake master cylinder , and add as needed. • Check all lights and all other electrical items for correct operation. • Check rubber seals on each [...]

SCHEDULE “B” Follow schedule “B” if you usually operate your vehicle under one or more of the following conditions. Change the automatic transmission fluid and filter every 60,000 miles (100 000 km) if the vehicle is usually operated under one or more of the conditions marked with an 〫 . • Day or night temperatures ar e below 32° F (0?[...]

Miles 3,000 6,000 9,000 12,000 15,000 18,000 (Kilometers) (5 000) (10 000) (15 000) (20 000) (25 000) (30 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.* XXXX X Replace the air cleaner filter . X Inspect the front and r ear brake linings and rotors. XX R[...]

Miles 21,000 24,000 27,000 30,000 33,000 36,000 (Kilometers) (35 000) (40 000) (45 000) (50 000) (55 000) (60 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.* XXX X X Replace the air cleaner filter . X Inspect the front and r ear brake linings and rotors.[...]

Miles 39,000 42,000 45,000 48,000 51,000 54,000 (Kilometers) (65 000) (70 000) (75 000) (80 000) (85 000) (90 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.* XX XX X Replace the air cleaner filter . X Inspect the front and r ear brake linings and rotors.[...]

Miles 57,000 60,000 63,000 66,000 69,000 72,000 (Kilometers) (95 000) (100 000) (105 000) (1 10 000) (1 15 000) (120 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.* X XXX X Replace the air cleaner filter . X Inspect the front and r ear brake linings and [...]

Miles 75,000 78,000 81,000 84,000 87,000 90,000 (Kilometers) (125 000) (130 000) (135 000) (140 000) (145 000) (150 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.* XXXX Replace the air cleaner filter . XX Inspect the front and r ear brake linings and rot[...]

Miles 93,000 96,000 99,000 102,000 105,000 (Kilometers) (155 000) (160 000) (165 000) (170 000) (175 000) Change engine oil and engine oil filter , if not re- placed at 3 months. XXXXX Inspect the air cleaner filter and replace if r e- quired.* XXXX Replace the air cleaner filter . X Replace the spark plugs. X Inspect the front and r ear brake lini[...]

SCHEDULE “A” Miles 6,000 12,000 18,000 24,000 30,000 36,000 (Kilometers) (10 000) (20 000) (30 000) (40 000) (50 000) (60 000) [Months] [6] [12] [18] [24] [30] [36] Change engine oil and engine oil filter . X XXXXX Inspect the air cleaner filter and replace if r e- quired.* X XXX X Replace the air cleaner filter . X Inspect the front and r ear [...]

Miles 42,000 48,000 54,000 60,000 66,000 72,000 (Kilometers) (70 000) (80 000) (90 000) (100 000) (1 10 000) (120 000) [Months] [42] [48] [54] [60] [66] [72] Change engine oil and engine oil filter . X X X X X X Inspect the air cleaner filter and replace if requir ed.* XX X X X Replace the air cleaner filter . X Inspect the front and r ear brake li[...]

Miles 78,000 84,000 90,000 96,000 102,000 (Kilometers) (130 000) (140 000) (150 000) (160 000) (170 000) [Months] [78] [84] [90] [96] [102] Change engine oil and engine oil filter . X X X X X Inspect the air cleaner filter and replace if r e- quired.* XX X X Replace the air cleaner filter . X Replace the spark plugs. X Inspect the front and r ear b[...]

W ARNING! Y ou can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic. SCHEDULE “A” 31 1 8 M A I N T E N A N C E S C H E D U L E S[...]

[...]

IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 3 1 4 ▫ Prepar e For The Appointment ............ 3 1 4 ▫ Prepar e A List ........................ 3 1 4 ▫ Be Reasonable W ith Requests ............. 3 1 4 䡵 If Y ou Need Assistance .................. 3 1 4 䡵 W[...]

SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty , discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s[...]

• If for some reason you ar e still not satisfied, talk to the general manager or owner of the dealership. They want to know if you need assistance. • If your dealership is unable to resolve the concern, you may contact the Manufacturer’s Customer Center . Any communication to the Manufacturer’s Customer Center should include the following [...]

Service Contract Y ou may have purchased a service contract for your vehicle to help protect you fr om the high cost of unex- pected repairs after your manufactur er’s new vehicle limited warranty expires. The manufactur er stands be- hind only the manufacturer’s Service Contracts. If you purchased a manufactur er’s Service Contract, you will[...]

REPORTING SAFETY DEFECTS In the 50 United States and W ashington D.C.: If you believe that your vehicle has a defect which could cause a crash or cause injury or death, you should immediately inform the National Highway T raffic Safety Administra- tion (NHTSA) in addition to notifying the manufacturer . If NHTSA receives similar complaints, it may [...]

• Service Manuals. These comprehensive service manuals pr ovide the information that students and professional technicians need in diagnosing/troubleshooting, pr oblem solving, maintaining, servicing and repairing DaimlerChrysler Corporation vehicles. A complete working knowledge of the vehicle, system and/or components is written in straightforw[...]

DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following describes the tire grading categories estab- lished by the National highway T raffic Safety Adminis- tration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your car . All Passenger Car T ires Must Con[...]

T emperature Grades The temperature grades ar e A (highest), B, and C, repre- senting the tire’s r esistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and r educe tire l[...]

INDEX 10[...]

ABS (Anti-Lock Brake) System ............. 2 0 5 Adding Engine Coolant (Antifreeze) ......... 2 7 3 Adding Fuel .......................... 2 3 5 Adding W asher Fluid ................. 101,270 Additives, Fuel ........................ 2 3 3 Adjustable Pedals ....................... 9 3 Air Conditioner Maintenance .............. 2 6 7 Air Conditioning[...]

Location ......................... 248,266 Bearings .............................. 2 7 9 Belts, Drive ........................... 2 6 2 Body Mechanism Lubrication .............. 2 6 9 B-Pillar Location ....................... 2 1 3 Brake Assist System ..................... 1 0 3 Brake Control System, Electr onic ........... 1 0 3 Brake, Parking ...[...]

Contract, Service ....................... 3 1 6 Coolant Pressur e Cap .................... 2 7 3 Cooling System ........................ 2 7 1 Adding Coolant (Antifreeze) ............. 2 7 3 Coolant Capacity ..................... 2 9 5 Coolant Level ..................... 271,274 Disposal of Used Coolant ............... 2 7 4 Drain, Flush, and Refil[...]

Emission Control System Maintenance .... 257,298 Engine ............................... 2 5 5 Air Cleaner .......................... 2 6 3 Air Cleaner Filter ..................... 2 6 3 Break-In Recommendations ............... 5 7 Checking Oil Level .................... 2 6 0 Compartment ........................ 2 5 5 Coolant (Antifreeze) .........[...]

Folding Rear Seat ....................... 9 2 Freeing A Stuck V ehicle .................. 2 5 0 Fuel ................................. 2 3 1 Adding ............................. 2 3 5 Additives ........................... 2 3 3 Clean Air ........................... 2 3 2 Filler Cap ........................... 2 3 5 Filter ..........................[...]

High Beam/Low Beam Select (Dimmer) Switch ................................ 9 9 Holder , Cup ........................... 1 2 2 Homelink T ransmitter ................... 1 1 2 Hood Release .......................... 9 4 Horn ................................. 1 2 Hoses ............................ 275,278 Ignition K e y ...............................[...]

Bulb Replacement ..................... 2 8 9 Courtesy/Reading ..................... 9 5 Daytime Running ...................... 9 8 Dimmer Switch, Headlight ............... 9 7 Electronic Stability Pr ogram Indicator ...... 1 0 7 Engine T emperature W arning ............ 1 3 4 F o g ............................. 99,135 Hazard W arning Flasher ......[...]

Exterior Folding ....................... 6 6 Heated .............................. 6 7 Outside ............................. 6 6 Rearview ............................ 6 5 V anity .............................. 6 7 Modifications/Alterations, V ehicle ............ 7 Monitor , T ire Pressur e System ............. 2 2 3 Mopar Parts ....................[...]

Outlet .............................. 1 2 0 Seats ............................... 8 8 Steering ............................ 2 0 7 Steering, Checking .................... 2 6 8 Sunroof ............................ 1 1 7 W indows ............................ 2 4 Pregnant W omen and Seat Belts ............. 3 5 Pretensioners Seat Belts ...............[...]

Seat Belt Reminder ...................... 3 4 Seat Belts .............................. 2 9 Adjustable Upper Shoulder Anchorage ...... 3 3 And Pregnant W omen .................. 3 5 Child Restraint ...................... 50,55 Extender ............................ 3 5 Front Seat ............................ 3 0 Operating Instructions ..............[...]

Steering Wheel Mounted Sound System Controls ............................ 1 7 4 Storage ........................... 124,289 Storage, V ehicle ..................... 187,289 Storing Y our V ehicle ..................... 2 8 9 Sun Roof ............................. 1 1 7 Sunglass Storage ....................... 1 1 1 Supplemental Restraint System - Air[...]

T owing V ehicle Behind a Motor Home ....... 2 3 9 T raction Control ........................ 1 0 3 T railer T owing ......................... 2 3 9 T ransmission .......................... 2 7 8 Automatic ........................ 194,278 Fluid .............................. 2 9 6 Shifting ............................ 1 9 4 T ransmitter Battery Ser[...]

W indshield W ashers .................. 100,270 W indshield W iper Blades ................. 2 6 9 W indshield W ipers ...................... 1 0 0 W iper Blade Replacement ................. 2 6 9 W ipers, Intermittent ..................... 1 0 1 334 INDEX[...]

NOTES[...]

NOTES[...]